SQL Error Data Flow Task 1: The buffer manager detected that the system was low on virtual memory...

I'm relatively new to SQL and this is the error that appeared when I tried importing my data. Not sure how to deal with this. Help please. Thanks a lot!
Information 0x4004800c: Data Flow Task 1: The buffer manager detected that the system was low on virtual memory, but was unable to swap out any buffers. 14 buffers were considered and 14 were locked. Either not enough memory is available to the pipeline
because not enough is installed, other processes are using it, or too many buffers are locked.

Either reduce the amount of data e.g. by lowering the Data Flow Task records max per batch and buffer size
or install more RAM, or process on a more capable computer.
Arthur
MyBlog
Twitter

Similar Messages

INS - 40416 the installer has detected that the version of

Hi,
While I 'm doing upgradation from 10.2.0.5 to 11.2.0.3 on Windows 2003 getting following Error.
INS - 40416 the installer has detected that the version of the configured instance of Grid infrastructure is not compatible for upgrade to the release of Grid.
Is there any configuration issue?
Thanks
Raja..

user12159566 wrote:
Hi,
While I 'm doing upgradation from 10.2.0.5 to 11.2.0.3 on Windows 2003 getting following Error.
INS - 40416 the installer has detected that the version of the configured instance of Grid infrastructure is not compatible for upgrade to the release of Grid.
Is there any configuration issue?
Please detail your env !!! You need be more specific... What you are trying to do .. Upgrade database or clusterware?

The install has detected that the primary IP address of the system is DHCP

While trying to install Oracle 10g R2 on RHEL 5.4, I got following error during "Checking Network Configuration requirements"
Check complete. The overall result of this check is: Failed <<<<
Problem: The install has detected that the primary IP address of the system is DHCP-assigned.
Recommendation: Oracle supports installations on systems with DHCP-assigned public IP addresses. However, the primary network interface on the system should be configured with a static IP address in order for the Oracle Software to function properly. See the Installation Guide for more details on installing the software on systems configured with DHCP.
Can any one please help me resolving it. Thanks in Advance

Nimish Garg wrote:
during the installation configure the host to be localhost; 127.0.0.1please explain how and what is the effect ??
also i wanted to know if I ignore this DHCP related warning, what will be the impact after installation on Oracle Software & DatabaseThe impact will be as in the warning that it gave you ... oracle will not function properly.
It really doesn't matter if the server is "production" or not. A server needs a fixed IP adddress. The IP address is how other computers (and in some cases, processes on the same computer) locate the server. If the addess is DHCP, then you can never know what the address is because it can change. It would be like you changing your telephone number or email address every day, and still expecting people to be able to contact you.
127.0.0.1 (aka 'localhost) is a fixed address, but it is also non-routable, which means no other machine will be able to contact this one by using that address. Every computer on the planet has that address. It means "me, myself, and I". A request to that address never leaves the machine from which the request originated.
You stated earlier that "DHCP can't be changed to Static IP", but why not? Why can't your network guys allocate you a fixed IP address?

I can't access Facebook. I keep getting the "Firefox has detected that the server is redirecting the request for this address in a way that will never complete". I have cleared cache, cookies, history, offline storage. Nothing has worked.

can't access Facebook. I keep getting the "Firefox has detected that the server is redirecting the request for this address in a way that will never complete". I have cleared cache, cookies, history, offline storage. Nothing has worked.

Start Firefox in [[Safe Mode]] to check if one of your add-ons is causing your problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]]

Data flow task error failed validation and return validation status "VS_NEEDSNEWMETADATA"

I have ETL with ~800 tables that I moving from Oracle to SQL Server (Prod Oracle -> Prod SQL)
Now the Oracle/SQL new version was came from vendor that I need to test, and for that I created new DEV environments for Oracle and SQL , the update includes updated new columns in exists tables and new tables . (DEV Oracle -> DEV SQL)
So what I tried to do is to take the old ETL(PROD) to change the connection to DEV servers.
Then I executing the packages from local laptop it's working, and if I trying to execute the packages from job schedule it's giving me errors : "Data flow task error failed validation and return validation status "VS_NEEDSNEWMETADATA"
I went to each table to check the columns if something different, and I was dropping some of the tables and recreated them in the destination but the error still shows. I also tried to change the package to "DelayValidation" to True but without
success.

I do not understand the difference between "... if I going to change the Connection Manager to new connection" and "didn't change the Connection Manager, only changed inside the Server name / user/ pass" 800 tables.
What I see is some tables your packages sees in Dev (laptop) is not of the same schema once the package is deployed hence the metadata error.
Arthur
MyBlog
Twitter

Need help ASAP with Data Flow Task Flat File Connection

Hey there,
I have a Data Flow Task within a ForEach loop container. The source of the flow is ADO.NET connection and the destination is a Flat File Connection. I loop through a collection of strings in the ForEach loop. Based on the string content,
I write some data to the same destination file in each iteration overwriting the previous version.
I am running into following Errors:
[Flat File Destination [38]] Warning: The process cannot access the file because it is being used by another process.
[Flat File Destination [38]] Error: Cannot open the datafile "Example.csv".
[SSIS.Pipeline] Error: Flat File Destination failed the pre-execute phase and returned error code 0xC020200E.
I know what's happening but I don't know how to fix it. The first time through the ForEach loop, the destination file is updated. The second time is when this error pops up. I think it's because the first iteration is not closing the destination
file. How do I force a close of the file within Data Flow task or through a subsequent Script Task.
This works within a SQL 2008 package on one server but not within SQL 2012 package on a different server.
Any help is greatly appreciated.
Thanks!

Thanks for the response Narsimha. What do you mean by FELC?
First time poster - what is the best way to show the package here?

Foreach Loop Container with a Data Flow Task looking for file from Connection Manager

So I have a Data Flow Task within a Foreach Loop Container. The Foreach Loop Container has a Variable Mapping of User:FileName to pass to the Data Flow Task.
The Data Flow Task has a Flat File Source since we're looking to process .csv Files. And the Flat File Source has a Flat File Connection Manager where I specified the File name when I created it. I thought you needed to do this even though it won't really
use it since it should be getting its File name from the Foreach Loop Container. But when attempting to execute, it is blowing up because it seems to be looking for my test file name that I indicated in the Flat File Connection Manager rather than the file
it should be trying to process in User:FileName from the Foreach Loop Container.
What am I doing wrong here??? I thought you needed to indicate a File name within the Flat File Connection Manager even though it really won't be using it.
Thanks for your review...I hope I've been clear...and am hopeful for a reply.
PSULionRP

The Flat File Connection manager's Connection String needs to be set to reference the variable used in the ForEach Loop:
Arthur My Blog

How can I create a template of a Data Flow Task in SSDT?

The majority of the Data Flow Tasks that I build have the same five elements in them (OLE DB Source, Conditional Split, Derived Column, Data Conversion, and OLE DB Destination). I'd love to have a template of a Data Flow Task which already contains
these elements. Is that possible for me to create, and how do I do it?
I'm currently on SSDT 11.1, with Visual Studio Pro 2012.

Hi Tim_Dorenkamp,
If I understand correctly, you want to create a custom task, then add it as template of a Data Flow Task in SSIS Toolbox. So that you can use it in every packages.
Just as Samir suggested, we can developing a Custom Task that create a class that inherits from the Task base class, apply the DtsTaskAttribute attribute to your new class, and override the important methods and properties of the base class, including the
Execute method. The sample of create a custom task is for your reference:
http://microsoft-ssis.blogspot.com/2013/06/create-your-own-custom-task.html
Besides, as to your requirement, we can simply create a template package that including this Data Flow Task, then use this template to create new packages. If we want to use the Data Flow Task in an existing package, we can add a new package with the template,
then copy the Data Flow Task from the new package and paste it to the existing package. For more details about create a template package in SSIS, please refer to the following thread:
https://social.technet.microsoft.com/Forums/en-US/b0747467-daff-4fc8-9f81-20d68b38e5ee/change-default-for-package-protection-level?forum=sqlintegratio
If there are any other questions, please feel free to ask.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

I am able to load some pages from a particular website while other pages from the same site give the error "Firefox has detected that the server is redirecting the request for this address in a way that will never complete."

I am able to access some directories on the website without any problems while I get the "Firefox has detected that the server is redirecting the request for this address in a way that will never complete." error for other directories of the same site.
== URL of affected sites ==
http://www.safelistgrande.com

Suddenly from yesterday I am getting this error while trying to opening gmail

Read from sql task and send to data flow task - [OLE DB Source [1]] Error: A rowset based on the SQL command was not returned by the OLE DB provider.

I have created a execut sql task -
In that, i have a created a 'empidvar' variable of string type and put sqlstatement = 'select distinct empid from emp'
Resultset=resultname=0 and variablename=empidvar
I have added data flow task of ole db type and I put this sql statement under sql command - exec emp_sp @empidvar=?
I am getting an error.
[OLE DB Source [1]] Error: A rowset based on the SQL command was not returned by the OLE DB provider.
[SSIS.Pipeline] Error: component "OLE DB Source" (1) failed the pre-execute phase and returned error code 0xC02092B4.

shouldnt setting be Result
Set=Full Resultset as your query returns a resultset? also i think variable to be mapped should be of object type.
Then for data flow task also you need to put it inside a ForEachLoop based on ADO.NET recordset and map your earlier variable inside it so as to iterate for every value the sql task returns.
Also if using SP in oledb source make sure you read this
http://consultingblogs.emc.com/jamiethomson/archive/2006/12/20/SSIS_3A00_-Using-stored-procedures-inside-an-OLE-DB-Source-component.aspx
Please Mark This As Answer if it helps to solve the issue Visakh ---------------------------- http://visakhm.blogspot.com/ https://www.facebook.com/VmBlogs

Error at Data Flow Task [OLE DB Source [1]]: No column information was returned by the SQL command." error

I have an .XLSX File that I am trying to Upload into SQL Server. I use the Source as OLEDB Connection manager and pick OLDEB PROVIDER as MS OFFICE 12.0 ACCESS DATABASE ENGINE. In that I put this query but it gives the foll
error when I run the SSIS Package.
[OLE DB Source [1]] Error: No column information was returned by the SQL command.
Query I use in DATA FLOW TASK , IS SQL COMMAND:
Select top 1 [Investor #],[Investor Name], CONVERT (VARCHAR(1000),Delegation)AS DELEGATION ,[Date Added],[Date Revised] from [EXCELSHEET1$]
Any suggestion to fix this error? i have to do a convert since the excel datayype is DT_TEXT AND SQL TABLE DATATYPE is VARCHAR(1000) SO Have to do this Convert.

If the target table's column is not a BLOB/CLOB (e.g. NVARCHAR(MAX)) and you have text longer than the max value it will not fit into the target, if you are allowed you need to trim it and convert, otherwise sure you get the error as the target datatype
is smaller.
Arthur My Blog

Error on Data Flow Task MSSQL 2012 Clustered "Description: The version of Lookup is not compatible with this version of the DataFlow. "

We have an SSIS package that runs on clustered MSSQL 2012 Enterprise Nodes that is failing. We use a job to executer the package.
Environmental information:
Product - Microsoft SQL Server Enterprise: Core-based Licensing (64-bit)
Operating System - Microsoft Windows NT 6.1 (7601)
Patform - NT x64
Version - MSSQL Version 11.0.3349.0
Package is set to 32 -bit. All permissions verified. Runs in lower environments, same MSSQL version. All environments are clustered. In the failing environment, all nodes are at the same service pack. I have not verified if all
nodes in the failing environment have SSIS installed. Data access is installed. We have other simpler packages that run in this environment, just not this one. Time to ask the community for help!
Error:
Source: Data Flow Task - Data Flow Task (SSIS.Pipeline) Description: The version of Lookup is not compatible with this version of the DataFlow. End Error Error: Code: 0xC0048020
Description: Component "Conditional Split, clsid {7F88F654-4E20-4D14-84F4-AF9C925D3087}" could not be created and returned error code 0x80070005 "Access is denied.". Make sure that the component is registered correctly. End Error
Description: The component is missing, not registered, not upgradeable, or missing required interfaces. The contact information for this component is "Conditional Split;Microsoft Corporation; Microsoft SQL Server; (C) Microsoft Corporation; All Rights
Reserved; http://www.microsoft.com/sql/support;0". End Error
(Left out shop specific information. This is the first error in the errors returns by the job history for this package. )
Thanks in advance.

Hi DeveloperMax,
According to your description, the error occurs when you execute the package with Agent job on clustered MSSQL 2012 Enterprise Nodes.
As per my understanding, I think this issue can be caused by you use SQL Server Agent to schedule a SQL Server Integration Services package in a 64-bit environment. And the SSIS package is referencing some 32-Bit DLL or 32-Bit drivers which are available
only in 32-bit versions, so the job failed.
To fix this issue, we should use the 32-bit version of the DTExec.exe utility to schedule the 64-bit SQL Server Agent to run a package. To run a package in 32-bit mode from a 64-bit version of SQL Server Agent, we can go to the Job Step dialog box, then
select “32 bit runtime” in the Advanced tab.
Besides, we should make sure that SQL Server Integration Services is installed on the failing environment.
If there are any other questions, please feel free to ask.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

Error: 0xC020902A at Data Flow Task, XML Source [24515]: The "component "XML Source" (24515)" failed because truncation occurred, and the truncation row disposition on "output column "MsgLev1" (26196)" specifies failure on truncation. A truncation error o

When I was Importing data from XML to SqlServer using SSIS , I am getting this error. The import is working if i use small file and not working if I use large XMl file. Can any one of you guys help me out with the issue?
Error: 0xC020902A at Data Flow Task, XML Source [24515]: The "component "XML Source" (24515)" failed because truncation occurred, and the truncation row disposition on "output column "MsgLev1" (26196)" specifies failure on truncation. A truncation error occurred on the specified object of the specified component.
Error: 0xC02092AF at Data Flow Task, XML Source [24515]: The component "XML Source" (24515) was unable to process the XML data. Pipeline component has returned HRESULT error code 0xC020902A from a method call.
Error: 0xC0047038 at Data Flow Task: SSIS Error Code DTS_E_PRIMEOUTPUTFAILED. The PrimeOutput method on component "XML Source" (24515) returned error code 0xC02092AF. The component returned a failure code when the pipeline engine called PrimeOutput(). The meaning of the failure code is defined by the component, but the error is fatal and the pipeline stopped executing. There may be error messages posted before this with more information about the failure.
Error: 0xC0047021 at Data Flow Task: SSIS Error Code DTS_E_THREADFAILED. Thread "SourceThread0" has exited with error code 0xC0047038. There may be error messages posted before this with more information on why the thread has exited.
Error: 0xC0047039 at Data Flow Task: SSIS Error Code DTS_E_THREADCANCELLED. Thread "WorkThread0" received a shutdown signal and is terminating. The user requested a shutdown, or an error in another thread is causing the pipeline to shutdown. There may be error messages posted before this with more information on why the thread was cancelled.
Error: 0xC0047039 at Data Flow Task: SSIS Error Code DTS_E_THREADCANCELLED. Thread "WorkThread1" received a shutdown signal and is terminating. The user requested a shutdown, or an error in another thread is causing the pipeline to shutdown. There may be error messages posted before this with more information on why the thread was cancelled.
Error: 0xC0047039 at Data Flow Task: SSIS Error Code DTS_E_THREADCANCELLED. Thread "WorkThread3" received a shutdown signal and is terminating. The user requested a shutdown, or an error in another thread is causing the pipeline to shutdown. There may be error messages posted before this with more information on why the thread was cancelled.
Error: 0xC0047039 at Data Flow Task: SSIS Error Code DTS_E_THREADCANCELLED. Thread "WorkThread4" received a shutdown signal and is terminating. The user requested a shutdown, or an error in another thread is causing the pipeline to shutdown. There may be error messages posted before this with more information on why the thread was cancelled.
Error: 0xC0047039 at Data Flow Task: SSIS Error Code DTS_E_THREADCANCELLED. Thread "WorkThread2" received a shutdown signal and is terminating. The user requested a shutdown, or an error in another thread is causing the pipeline to shutdown. There may be error messages posted before this with more information on why the thread was cancelled.
Error: 0xC0047021 at Data Flow Task: SSIS Error Code DTS_E_THREADFAILED. Thread "WorkThread0" has exited with error code 0xC0047039. There may be error messages posted before this with more information on why the thread has exited.
Error: 0xC0047021 at Data Flow Task: SSIS Error Code DTS_E_THREADFAILED. Thread "WorkThread1" has exited with error code 0xC0047039. There may be error messages posted before this with more information on why the thread has exited.
Error: 0xC0047021 at Data Flow Task: SSIS Error Code DTS_E_THREADFAILED. Thread "WorkThread2" has exited with error code 0xC0047039. There may be error messages posted before this with more information on why the thread has exited.
Error: 0xC0047021 at Data Flow Task: SSIS Error Code DTS_E_THREADFAILED. Thread "WorkThread3" has exited with error code 0xC0047039. There may be error messages posted before this with more information on why the thread has exited.
Error: 0xC0047021 at Data Flow Task: SSIS Error Code DTS_E_THREADFAILED. Thread "WorkThread4" has exited with error code 0xC0047039. There may be error messages posted before this with more information on why the thread has exited.

The reason is in the first line of the error. It doesn't have anything to do with the size of your XML file - it has to do with the contents of the "MsgLev1" column. You (or the XSD) has indicated that the values in this column not exceed a certain size - but one of the values in the file that's failing is larger than that.
In order to fix the problem, you're going to need to increase the allocated space for that column. In order to do that, you're going to need to find out what the required size of that data is - either from someone who ought to know, or by direct examination of the file. If you want to know which entity has this overly large data element in it, you need to configure the error handling of the XML Source to "redirect truncation errors". Then you can hook up the XML Source's error output to another destination where you can see which rows are problematic.
Talk to me on

"Syntax error or access violation" on Data Flow Task OLE DB Data Source

I am implementing expression parameter for a SQL Server connection string (like this: http://danajaatcse.wordpress.com/2010/05/20/using-an-xml-configuration-file-and-expressions-in-an-ssis-package/) and it works fine except when it reaches data flow
task - OLE DB Source task. In this task, I execute a stored procedure like this:
exec SelectFromTableA ?,?,?
The error message is this:
0xC0202009 at Data Flow Task, OLE DB Source [2]: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80004005.
An OLE DB record is available. Source: "Microsoft OLE DB Provider for SQL Server" Hresult: 0x80004005 Description: "Syntax error or access violation".
Error: 0xC004706B at Data Flow Task, SSIS.Pipeline: "OLE DB Source" failed validation and returned validation status "VS_ISBROKEN"
When I change the SQL command above with reading from table directly it works fine. I should also add that before changing connection string of the SQL data source to use expression, the SSIS package was working fine and I know that the connection string
is fine because other tasks in the package works fine!
Any idea why?

Hi AL.M,
As per my understanding, I think this problem is due to the mismatching between the source and the destination tables. We can reconfigured every of components of the package to check the table schemas and configuration settings, close the BIDS/SSDT and then
open and try to see if there are errors.
Besides, to trouble shoot this issue, we can use the variable window to see the variable's value. For more details, please refer to the following blog:
http://consultingblogs.emc.com/jamiethomson/archive/2005/12/05/2462.aspx
The following blog about “SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred: Reasons and troubleshooting” is for your reference:
http://blogs.msdn.com/b/dataaccesstechnologies/archive/2009/11/10/ssis-error-code-dts-e-oledberror-an-ole-db-error-has-occurred-reasons-and-troubleshooting.aspx
Hope this helps.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

Cannot change SQL command text in Data Flow Task

I have an SSIS package that extracts data from Teradata into a SQL Server DB.
I'm using SQL Server 2008 R2 EE x64, and Visual Studio 2008 PE (BIDS) supplied with it, accessing Teradata v13.
In the Integration Services project, I have a Data Flow Task, it has an ADO .net source which has Data access mode set to “SQL Command”.
This worked for a while when I initially entered a SQL statement to select data.
But, when I change the existing SQL Command text and save the package, the changes are lost.
It keeps going back to the original SQL Statement.
It is currently “select col1, col2, … col10 from view1”.
When I change it to anything else, like “select col5 from view1”, and save, and then double click the ADO NET source again, I find that the SQL command text is still the old one. It goes back to the previous statement.
I’ve tried other statements like “exec macro” for Teradata, etc. but the same thing keeps happening - changes are not saved.
Does anyone have any ideas on this, or have you seen this before?

This is odd, but seems to be a component metadata corruption; so why don't you:
delete the teradata connector and source component, then re add them back, see if it now accepts the new SQL statement, if this does not work
abandon this package and create a new one replicating the functionality incorporating the new SQL.
In case #1 and 2 both fail post here any errors observed and find out whether you are missing any updates to either Teradata provider or SQL Server
Arthur My Blog

SQL Error Data Flow Task 1: The buffer manager detected that the system was low on virtual memory...

Similar Messages

Maybe you are looking for