SQL error while activating DSO and loading Mater Data
Hello Experts,
we are having process chains which include process activating DSO and loading to Master data,
while executing achai, we are getting error:
An error occurred during confirmation of process 000008. See long text
Message no. RSODSO_PROCESSING024
Diagnosis
Note the detailed system message:
An SQL error occurred when executing Native SQL.
when i go to T-Code: ST22
the diagnosis is below:
Runtime Errors DBIF_RSQL_SQL_ERROR
Exception CX_SY_OPEN_SQL_DB
Date and Time 20.05.2010 22:18:02
What happened?
The database system detected a deadlock and avoided it by rolling back
your transaction.
What can you do?
If possible (and necessary), repeat the last database transaction in the
hope that locking the object will not result in another deadlock.
Note which actions and input led to the error.
For further help in handling the problem, contact your SAP administrator
You can use the ABAP dump analysis transaction ST22 to view and manage
termination messages, in particular for long term reference.
Note which actions and input led to the error.
For further help in handling the problem, contact your SAP administrator
You can use the ABAP dump analysis transaction ST22 to view and manage
termination messages, in particular for long term reference.
Could you please help me out how can i deal with this issue, .
Regards
Sinu Reddy
it seems that the target you're loading to is already locked by another load...if it concerns a master data is also possible that the master data is locked by a change run. check your scheduling and make sure you don't load the same target at the same moment...
M.
Similar Messages
-
Error while activating DSO after loading from another DSO..Production issue
Hello Gurus,
I got an error while activating DSO2 after loading from another DSO1.
DSO1 load and activation was sucessful but while loading from DSO1 to DSO2 load was fine but got error while activating...
>Error when assigning SID: Action VAL_SID_CONVERT table ZWEEK_NUM
>Value u201809u2019 of characteristic ZWEEK_NUM is not a number with 000004 spaces
this theard was posted after searching for related post in SDN.
and i tried Function Module RSODS_CHECK_RSODSACTUPDTYPE but it is not available .. but I used this in BW 3.10u2026..
is their any similar Function Module in BI 7.0 please advice.
We are using SAP NetWeaver BI 7.0
Release- 700 Service level- 017
Thanks in advance
Sandysloved the issue......
it was due to wrong data for the related field...
it must be "0009 "
Thanks for ur support. closing the ticket
Regards
Sandy -
Hi all,
While activating the DSO ,I am getting the following error: Value '20022009' of characteristic 0DATE is not possible
In FEB 20/02/2009 is possible ...but why system giveing this message...?
Any suggessions...on this..
Thanks....Bk
Edited by: BK BI on Feb 24, 2009 9:39 AMHi BK,
Looks like in your case 20 is being considered as month which is obviously invalid hence no SID could be generated for 0calday and hence the DSO fails when activation.
Now as Daya and anil mention you could change the date to format yyyymmdd and try reloading the file.
The general principle would be go to menu settings ---> status and check the logged on date ...the format being shown to you is the format you can try loading in.
Or go to System --- > User profile -
> Own data --->defaults tab .... check the data format there and enter the value in that format in your file..
Hope it helps,
Regards,
Sunmit. -
Error while Activating DSO Data
Hello
I am having a problem, I am getting an Error while activating DSO Data, Data is loaded in DSO succefully but can not be activated with this error
"Activation of M records from DataStore object 0FIAR_O03 terminated"
ThanksHi,
The activation would have failed due to varies reasons..
It would be a short dump,check in ST22.
check the job log in SM37 for better understanding of the issue.
Have you loaded the respective master data?
if it is a transaction data load,then the SID is checked at the time of activation and not during loading.
So if the master data is not loaded then the activation would fail.
It can also be due to the system performance at that moment.
Even if the data volume is huge ,there are chances of the activation failing..
Try repeating the activation once again.it might succeed..
Else check the logs to understand the actual issue. -
Hexadecimal Error while activating DSO
Hello Experts,
I'm getting following error while activating DSO. I tried ALL_CAPITAL, ALL_CAPITAL_HEXADECIMAL in RSKC. still i'm facing this problem anyone can suggest anything. Iam using BW3.x flow
Value "CC-5012 TRYPSIN/EDTA SOLUTION 100ML" (HEX 430043002D0035003000310032000A00540052005900500053) of characteristic 0CRM_ITDESC contains an error at position 8
Message no. BRAIN290
Diagnosis
Characters that have a hexadecimal display between HEX00 and HEX1F are not permitted in characteristic values. The character at position 8 is one of these characters. The value is therefore not permitted.
Note that these characters cannot be displayed and are therefore displayed as '#'. The actual character '#' has the hexadecimal display HEX23.
Procedure
Check the origin of the characteristic value. If possible, change the characteristic value in the source.
Incorrect source text in update routines and transfer routines can also cause this problem.
Thanks
Ajay.DHi Ajay,
There are invalid characters at the specified position. Now you ahve 2 options:
1. Either edit the PSA manually and replace this invalid character
2. Use the Funvtion Module 'RSKC_CHAVL_CHECK' . Pass the data to it & get the invalid char replace it with space. This can be called in the filed level routine if the effected info object is identified .
Check out these threads:
Re: Problem with Characters that have a hexadecimal display between HEX00
Re: Invalid Characters issue
Regards
Raj -
Hi,
I am getting an error while activating the DSO. I am able to load the data but this occurs when I try to activate the data. I get the follwing error message
"Value "09020751987.44 " from characteristic 0REF_DOC_NO contains an error at position 15
Message no. BRAIN290
Diagnosis
Characters that have a hexadecimal display between HEX00 and HEX1F are not permitted in characteristic values. The character at position 15 is one of these characters. The value is therefore not permitted.
Note that these characters cannot be displayed and are therefore displayed as '#'. The actual character '#' has the hexadecimal display HEX23.
Procedure
Check the origin of the characteristic value. If possible, change the characteristic value in the source.
Incorrect source text in update routines and transfer routines can also cause this problem."
Any thoughts how I should correct/Hi Tanu,
this is an error in the data loaded. If you have used PSA, then try searching for the packet containing this record using the change log table, by request id. (This step is to precisely find the position of the record in PSA).
Now delete the request from the DSO and correct the data in PSA. The issue could be a tab or a space in the reference document feild and then save the data. Reconstruct this packet from PSA and then try activating.
Subsequently let the data team/ user know about the correction in the source system as well, in order to avoid any future failures.
This should correct the issue.
regards,
Naveen.A -
Error while activating DSO req-reg
Hi Experts,
I was trying to load data from a flat file. I got my data till PSA level. I have executed the DTP from datasource to DSO and when i am trying to activate the request i got request status red and error message says "Request is already (partially) activated; no further QM action possible". all records are transfered and my request is available for reporting. When i go to monitor there is no red symbol in any step but the overall status is red.
I searched in the forum for the same error message and i got that the data is transfered already. But i am not able to see the data in DSO through 'display data'. Plese let me know what is the reason for the red status and guide me how to proceed further.
Your help would be highly appreciated.
Thanks in advance.
Nikhil JoyHi Nikhil,
When you activate the data in DSO manually, job will create with your username. Job name will be ODSA_****
Please check the job log, you will get the details.
This might be due to non-availability of SID's or some duplicate records.
Please check the job log and post here
Regards,
Venkatesh -
Authorization error while activating DSO
Hi Gurus,
When I am trying to Activate DSO, it is throwing the following error.. Can anyone let me know what type of Authorizzation object should I give to resolve this issue..
You do not have authorization for the DWB object
Message no. RSM831
CAUSE&
You do not have authorization for object 'SOURCESYS' in the Data Warehousing Workbench.
System Response
The current activity was terminated.
Procedure
You require authorization for authorization object Data Warehousing Workbench - Object with Data Warehousing Workbench object 'SOURCESYS' and activity '03'.
Thanks in advanceHi,
Try activating again and if you get the error again then without going back to any other screen directly go to /NSU53 tcode.
Expand all the nodes and see if you get any object name uder red color background. If you get some object name then you basically need that object assigned value '03'.
Let me know if you are able to solve it.
Regards,
Anup -
Error while building outline and loading data
Hi,
I am getting errors while deploying cube from essbase studio.
My hierarchy is Branch->Account->MonthYear->Flag. Dimensions are Debit amount, credit amount.
Kindly advice me.
The error file is located on the server at: D:\Hyperion\products\Essbase\EssbaseStudio\Server\.\ess_japihome\data\FPP_94.FPP_94_05-12-10_16-23-01.err
\\Record #2 - Member name (09-2007) already used
1360 136010051332 09-2007 Y
\\Record #3 - Member name (09-2007) already used
0 158011007242 09-2007 N
\\Record #4 - Member name (09-2007) already used
5840 584011011887 09-2007 Y
\\Record #5 - Member name (09-2007) already used
1300 130010012120 09-2007 Y
Error: 3303;Y;Y 143 239 143 239 ;
Thanks in advance,
Best,
Veeranna Ronad.Hi Glenn,
Thanks for the reply. The hierarchy Branch->Account->MonthYear->Flag is always unique row in the base table. Flag is 'Y' or 'N'. I want Branchwise, accountwise, monthwise and flagwise consolidated amounts (debit and credit). Flag indicate that the transactions is from base branch or other.
The data in the base table is:
ACCOUNTNO | BRANCH | TRANSACTIONDATE | DEPOSITORWITHDRAWAL | Flag | AMOUNT
305080000033 | 7500 | 9/1/2007 | W | Y | 12000
425010053402 | 4250 | 9/1/2007 | D | Y | 1100
103011008900 | 5100 | 10/1/2007 | W | Y | 281
103011008900 | 5100 | 11/1/2007 | W | N | 500
161011000243 | 4500 | 12/1/2007 | D | Y | 145940
Hope your doubts are cleared.
Thanks,
Best,
Veeranna Ronad. -
Error while creating INFOPACKAGE to load transaction data
Hi,
I am getting the following error while creating infopackage:
"Error in Conversion exit CONVERSION_EXIT_CUNIT_INPUT"
I am getting this error when I click on the Start button under the schedule tab in the screen Administrator Workbench: Modelling.
I clicked on Monitor icon to view the diagnosis. The diagnosis is mentioned below:
the screen is Performance Assistant Window and the diagnosis message appears in italics.
<i>Message No RSAR137
DIAGNOSIS
An error occurred in record 1 during execution of conversion exit CONVERSION_EXIT_CUNIT_INPUT for field UNIT.
Procedure
Check that the record where error occurred has the correct format and correct it accordingly. </i>
Please note that I have succesfully created update rules as I didn't get any error.
Also I would like some one to explain me clearly the differences between transfer rules and update rules with a clear explanation please.
Please help me.
Thank you.
Tristan.Hello Tristan,
I was used to get the same kind of problems before.
I got the problem with the data source type-Flat File (.csv)
One solution that I have done:
1) checked the particular record in which the error message refer to
2) tested the particular unit from the transaction se37
Function Module = CONVERSION_EXIT_CUNIT_INPUT
Press F8 in order to execute
This would be help a bit
3) corrected data from the flat file
another alternative solution was by:
handling the data using routine in the transfer rules
For my case, before executing the InfoPackage, data from flat file could be previewed. At this point, I could check which records caused the problems.
I'm not sure about your case whether data came from which type of data source.
That's all I could share for now.
-WJ- -
Invalid character error while activating DSO - Please help
Hi experts,
I'm getting invalid hex character error when loading a text infoobject in my DSO. Repairing data records in the PSA is not an option. Changing the data in the source system is also not an option. I've tried many of the methods suggested in other threads, but am unable to get it working (ABAP code, "ALL_CAPITAL" etc). We are on an unicode system.
Can someone provide some clean code to eliminate the illegal hex characters (00-1f) in my transfer rule routine. Basically, replace the illegal hex characters with space or an acceptable character.
Many thanks,
Anita S.Hi,
I have used the below code for removing all unwanted chars from 0MATERIAL, that worked fine. You can modify it for ur need.
CONSTANTS:
G_ALLOWED_CHAR(58) TYPE C VALUE
' !"%&''()*+,-./:;<=>?_0123456789ABCDEFGHIJKLMNOPQRSTUVWXYZ'.
data : E_ALLOWED_CHAR(58).
RESULT = SOURCE_FIELDS-MATNR.
SHIFT RESULT RIGHT DELETING TRAILING SPACE.
SHIFT RESULT LEFT DELETING LEADING SPACE.
TRANSLATE RESULT TO upper case.
*RESULT = comm_structure-/BIC/ZCONTRTD.
while RESULT ca '#'.
RESULT+sy-fdpos(1) = ' '.
endwhile.
if RESULT(1) = '!'.
RESULT(1) = ' '.
endif.
do.
if not RESULT co g_allowed_char.
shift RESULT+sy-fdpos left.
else.
exit.
endif.
enddo.
Thanks
dipika -
Process Chain Error while activating DSO
Hello.
1st, let me say that I'm pretty new to BI so I apologize for the stupid question :-S
I have a process chain (Warehouse Mangement) that failed this morning at the DSO data activation step. It's simply because some entries have lowercase value in a field that should not. I know how easy this is to fix in the transformation but my problem is more on how to fix the actual fail of the process chain. Can I edit the "non-activated" data in the DSO (only 2-3 records that I need to put in uppercase) and "repair" my process chain or should I proceed another way?
Thanks for your help.Hi John.
If guess your Process Chain process ended in "Red color". Once you fix the error you can try to make "right-click" on the process with error and select "Repair". If this operation is "supported" by the activation process you won't have error.
But I really believe that you'll have to erase the request and launch the complete process (o set of related processes) once again. It's possible that the data you want its already in the NEW-DATA table of your ODS.
This tables is the following. /BIC/A<your ods tech-name>40
Hope it helps
gdmon.- -
Getting a sid's generation error while activating DSO
Dear All,
We are created a standard dso on top of generic data source. This data source is created on top CDHDR and CDPOS tables through function module.
While acting the DSO , We are getting a sid generation error.
Please let me know the process to resolve the issue or tell me any other alternative solution is available to overcome this situation.
Thanks
Regards,
Sai.KDear All,
Thanks for your prompt response and please find the below attachment.Here , the info object fetches some hexa decimal values due to that it got failed.
Please let me know solution to overcome the this error.
Thanks
Regards,
Sai.k -
Error while activating TCT and BI admin. Cockpit (Urgent)
Hi Experts,
We are configuring NW 04s BI system right now. We have followed the general settings on the system after Basis handed that over to us accrding to Best Practice config. document. Now to install BI administration cockpit, we need to activate the technical content for executing the BI Admin. cockpit. First of all, when we tried to install technical content automatically, we got this error msg no. RSTCO_UT013 and in our 2nd trial we are getting err msg no RSQBW400. First msg was about the job BI_TCO_ACTIVATION failure. Second msg is " There is no A version of Infoset 0RSTT_I07. Because of the errors, we are not able to install any standard business content. Every time we run a background job, it gets cancelled.
We are applying the OSS notes no. 965386 and 934484. If any one has any idea of resolving the issue plz. let us know. Full points will be awarded for the correct answers. Thanks <b></b>Hi All,
This is best practice in activating BI Statistics and Admin Cockpit.
BI Administration Cockpit and new BI Statistics Content in SAP NetWeaver 2004s - Webinar Details
https://www.sdn.sap.com/irj/sdn/webinar?rid=/library/uuid/d09864c5-0bb0-2910-8e8a-a306a886dcd9
I recomend to use BI CONT 703 SP5.
If not, you need do manual correction and apply more than 50 notes. -
Error while activation Function module for generic data extraction
Hi,
I have created a generic data source ZMATERIAL in which i have selected the Extraction by Function module. I copied the function module RSAX_BIW_GET_DATA_SIMPL to ZMATERIAL_FM, but when i activate this module it gives me error
REPORT/PROGRAM statement missing, or program type is I (INCLUDE).
The main program of the function "Z_BWGENDATAMATERIAL" does not begin with "FUNCTION-POOL".
Please help me in this.Hi Dipika,
I think a similar issue is discussed
Refer this thread
REPORT/PROGRAM statement missing, or program type is I (INCLUDE).
Compiling INCLUDE progam
question related to includes
question related to includes
Hope these helps
Regards
Karthik
Maybe you are looking for
-
New to the touch phone need help...
I need to transfer my pics on my old samsung flip phone to my new android..is this possible and if so, how?
-
I am trying to update my phone and the phone is frozen on a screen that has the itunes symbol and the computer connection showing. I did not have itunes on my computer. So I downloaded itunes set up which took an hour or so. Now what do I do?
-
Missing first typed letter in OSX 10.8.5
Having searched I see that a lot of people had this problem a few years ago on PowerBooks. I am on a Mac Pro: We have 2x artworking machines, both 3.33 Ghz 6-core Mac Pro towers (not the tubes). We have recently upgraded both of them to 10.8.5 from 1
-
Use dotx template as Crystal Report design template
Hi, i have dotx (ms word with header and footer) files. how can i use it as template file for the crystal report design ? anyway i can do this ? or any way i can use the dotx template files as background in my crystal report ? i google alot but look
-
hello all, when i was doing the lastest security update (005), it didnt seem to download properly. I had to click quite a few times, and even had to manually click the restart option at the toolbar to get the computer to restart (recall that this upd