SQL Express 2008 Management Studio : licensed under 'Microsoft Public License 4
Please help me to provide answer of the following question:
Is "SQL Express 2008 Management Studio" licensed under 'Microsoft Public License 4'?
Awaiting for your reply.
Thanks
Hi Anindita Roy,
Thank you for your post.
For more detailed information regarding to the license issue, please call 1-800-426-9400, Monday through Friday, 6:00 A.M. to 6:00 P.M. (Pacific Time) to speak directly to a Microsoft licensing specialist. For international customers, please use the Guide
to Worldwide Microsoft Licensing Sites to find contact information in your locations.
Thanks,
Sofiya Li
Sofiya Li
TechNet Community Support
Similar Messages
-
Error installing sql server 2008 management studio express
Hello,
I need to install sql server 2008 management studio express on a sql server 2k8 R2 instance.
First of all, I've downloaded this one from this link: http://www.microsoft.com/en-us/download/details.aspx?id=7593 (for 32 bits).
Once I've the downloaded file I run this file and choose the first option (New sql server stand-alone...) in the installation part. Finally, in the installation type I choose the option 'Add features to an existing instance of SQL Server 2008' with the instance
selected. I push Next and then I get the following error: 'The instance ID is required but it is missing'.
Can anybody help me?
Thanks a lot.
Regards.Hello,
What’s the edition of the SQL Server 2008 R2? If you had installed SQL Server 2008 R2 Developer edition, you should install “SQL Server 2008 Express with Tools” edition or “SQL Server 2008 Express with Advanced Services” edition.
Please refer to the following article for more information:
http://www.benlittler.com/2009/06/how-to-install-sql-management-studio-express-2008/
Regards,
Fanny Liu
Fanny Liu
TechNet Community Support -
Hi,
While installing the sql server 2008 management studio I am getting the below error.
unhandled exception has occured in your application.if you click continue,the application will ignore this error and attempt to continue.if you click quit,the aplication will close immediatly.
An error occured creating the configuration section handler for userSettings/Microsoft.SqlServer.Configuration.LandingPage.Properties.Settings:Could not load file or
assembly 'system.version=4.0.0.0. culture=neutral, publickey token=b77a5c561934e089' or one of its dependencies.the system cannot find the file supplied.
(C:\users\harsha\appdata\local\microsoft_corporation\landingpage.exe_strongname_ryspccglaxmt4nhllj5z3thycltsvyyx\10.0.0.0\user.config
and finally it is giving the options like continue and quit the installation.
So what do I do?
regards,
harsha.Hello,
Please try deleting the following sub folder to see if this will work:
C:\users\(my profile)\AppData\Local\Microsoft_Corporation
If you can't see AppData folder, you could use following steps to show hidden files:
1. Open an explorer window, hit "ALT-T" choose Folder Options then go to the view tab.
2. Turn on Show hidden files, folders or drives and
disable Hide protected Operating System files (recommended).
SQL Server 2008 setup fails with a Microsoft .NET Framework exception:
http://blogs.msdn.com/b/vsnetsetup/archive/2009/10/29/sql-server-2008-setup-fails-with-a-microsoft-net-framework-exception.aspx.
Hope this helps.
Regards,
Alberto Morillo
SQLCoffee.com -
Silent SQL Server 2008 Management Studio install on Win7
Hi,
Is there a way to suppress Compatibility warning box while silently installing SQL Server 2008 Management Studio install on Win7?
Thanks,
HHi Kugler,
Even I was facing the same issue. It is because you may pending reboots on the target machine.
I also used the cmdline as below:
<PATH of EXE> /Q /IACCEPTSQLSERVERLICENSETERMS /ACTION=install /FEATURES=SSMS,ADV_SSMS /HIDECONSOLE
Before installation it is better to restart the target machine and start with the installation. -
Sql server 2008 management studio
hi sir
we want to install following version of sql 2008 management studio for our access control.
it is free version or we need to purchase license for this please tell us because access control support team said this is free version. and when we check in Microsoft site also showing free version.need just confirm it is free or paid.
Microsoft SQL Server Management Studio 10.0.1600.22
Microsoft Data Access Components (MDAC) 2000.086.3959.00please confirm this is free version or paid
Microsoft SQL Server Management Studio 10.0.1600.22
Microsoft Data Access Components (MDAC) 2000.086.3959.00
Regarding MDAC: It' a System component and already integrated in all current Windows OS Version, no Need to install it; see
Microsoft Data Access Components (MDAC) 2.8 SP1 => System Requirements =>
Supported Operating System
Regarding SSMS: If you have a SQL Server licenses then you can install SSMS on the client machine, it's part of the license; see
http://download.microsoft.com/download/6/F/8/6F84A9FE-1E5C-44CC-87BB-C236BFCBA4DF/SQLServer2008_LicensingGuide.pdf page 47
"Additional Software That May Be Run"=> "... without the need for additional licenses
Olaf Helper
[ Blog] [ Xing] [ MVP] -
SQL Server 2008 Management Studio Express
So I have an employee that works on Domain A, however she needs to log into SSMS 2008 Express under Domain B. When she launches SSMS Express it will not let her change the windows login credentials at all. My boss told me that the solution below was suggested
to him by MS to resolve the issue.
runas
/netonly
/user:domain\username
"C:\Progr...\IDE\Ssms.exe"
So I did this and still same issue, the ability to change the credentials are still grayed out.
Any suggestions?
Thanks,
Matt M.Hi,
It is by design that User name and Password area is grayed out when using Windows Authentication. SQL Server Management Studio fills in the user with the currently logged on Windows account for Windows authentication. The end-user is not allowed to change
or input a different user.
As suggested, you can launch SSMS with runas command with the "/netonly" switch to log in using remote credentials on a domain that you’re not currently a member of.
Check out the following link for more information:
SSMS - Allow login with other domain and user
http://connect.microsoft.com/SQLServer/feedback/details/774357/ssms-allow-login-with-other-domain-and-user
TIP: How to Run Programs as a Domain User from a Non-domain Computer
http://codebetter.com/jameskovacs/2009/10/12/tip-how-to-run-programs-as-a-domain-user-from-a-non-domain-computer/
Thanks.
Tracy Cai
TechNet Community Support -
Microsoft SQL Server 2012 Management Studio Express
Hello,
I have a question, Can I use Microsoft SQL Server 2012 Management Studio Express tool to administrate my SQL Server 2008 Enterprise database without a restriction or limitations?.
Basically, I have a SQL server 2008 R2 database as production enviroment(Enterprise version) and I would like to know if I can use Microsoft SQL server 2012 Management Studio Express tool to manage my database without limitations.
ThanksSSMS2012 is backwards compatible so you can use ..
http://social.msdn.microsoft.com/Forums/en-US/sqltools/thread/0151c2e8-2281-4a78-86b0-20cc1bfd57ac
Raju Rasagounder MSSQL DBA -
Microsoft SQL Server 2012 Management Studio Express silent installation very slow
Iam doing silent installations often on several Systems.
I install the Microsoft SQL Server 2012 Management Studio Express with this command:
"SQLManagementStudio_x64_DEU.exe /ACTION=INSTALL /QUIET /IAcceptSQLServerLicenseTerms="True" /FEATURES=CONN,BC,SSMS /indicateprogress"
The installation will take almost an hour to finish.
I never get error messages or so. The installation afterwards is fine.
Is there a way to speed up the installation process?
Thanks!Hi Dennis,
When installing SQL Server Management Studio, it is normal for us taking an hour to finish the installation.
Personally, if you want to speed up the installation process, I recommend improve your hardware device on your computer, such as CPU, RAM, hard disk and so on.
Or you can submit an submit the requirement at https://connect.microsoft.com/SQLServer/.
If the requirement mentioned by customers for many times, the product team may consider to add or improve this requirement in the future SQL Server version. Thanks for your understanding.
Thanks,
Sofiya Li
Sofiya Li
TechNet Community Support -
Hi all,
In the Notepad, I created an xml file (ZenQroducts.xml) :
<Qroducts>
<Qroduct>
<SKU>1</SKU>
<Desc>Book</Desc>
</Qroduct>
<Qroduct>
<SKU>2</SKU>
<Desc>DVD</Desc>
</Qroduct>
<Qroduct>
<SKU>3</SKU>
<Desc>Video</Desc>
</Qroduct>
In my SQL Server 2012 Management Studio, I executed the following code:
--to create a new object Qroducts in a new database OPENXMLtesting
CREATE DATABASE OPENXMLtesting
GO
CREATE TABLE Qroducts(
sku INT Primary KEY,
qroduct_desc VARCHAR(30));
INSERT INTO Qroducts (sku, qroduct_desc)
SELECT X.qroduct.query('SKU').value('.', 'INT'),
X.qroduct.query('Desc').value('.', 'VARCHAR(30)')
FROM (
SELECT CAST(x AS XML)
FROM OPENROWSET(
BULK 'H:\ZenQroducts.xml',
SINGLE_BLOB) AS T(x)
) AS T(x)
CROSS APPLY x.nodes('Qroducts/Qroduct') AS X(qroduct);
SELECT sku, qroduct_desc
FROM Qroducts;
I got the following message:
Msg 9400, Level 16, State 1, Line 6
XML parsing: line 13, character 12, unexpected end of input
I have no ideas why I got this "XML parsing:line 13, character12, unexpected end of input" message. Please kindly help, advise me on where I made mistake and how I can resolve this problem, and respond in this Forum.
Thanks in advance,
Scott Chang
Hi Manish, Thanks for your response.
Yes, it is a duplicate with Qroducts/Qroduct instead of Products/Product. I did it, because I don't know how to remove the existing "Products" database.
Again, I got the existing "Qroducts" database in this second trial!!?? I am comletely lost in doing "Importing XML file to SQL Table" now!! I think that I have not touched T-SQL and XML programming, since 2008. I
did not catch the new features of T-SQL 2008, XML, SQL/XML, XQuery, etc. for long time. Recently, I did not know what DECLARE, @x, SET,...were, and dived into the SQL/XML and XQuery programming. I knew the SQL Basics (SELECT, FROM, WHERE,..), creating
the names of databases and tables in SQL Server 2008/2012 Management Studio (Express) before. This morning, I found an old T-SQL 2008 Prgrammer's Guide that has the new features of SQL Server 2008 for T-SQL, XML, XQuery, etc. I just starting reading
it to know what DECLARE, @x, SET,... are. But, I still don't know where the existing databases "Products" and "Qroducts" (created by me) are - they are not in the Databases of SQL Server 2012 Management Studio I am using!!?? Could
you please kindly point out where the "Products" and "Qroducts" databases are?
Prashanth responded to my posted question too and he asked to to try his code: DECLARE @xml XML, SELECT @xml =' <Qroducts>.....SELECT product.value.....FROM @XML.nodes.....AS.... I just learned that his code is doing the thing we
want to do and print the results below the SQL Query. This is not what I need in doing my SQL/XML programming. I am reading/studying the new (2008) features of T-SQL, XQuery 1.0: An XML Query Language (Second Edition), and Microsoft XQuery Language Reference
(SQL Server 2012 Books Online) closely now. I hope that I can resume the T-SQL, XML Query, SQL/XML, XQuery in my SQL Server 2012 Management Studio soon.
Please tell me where the existing databases "Products" and "Qroducts" I created in my previous trials in my SQL Server 2012 Management Studio. This is what I need to know and to delete them, before I do this kind of "Importing
XML file to Table of SQL Server 2012 Management Studio" programming again.
Please kindly help, advise and respond again.
Many Thanks,
Scott Chang -
Open (.sdf) file with SQL server 2005 Management Studio
In VS2005, I have created a SQL Mobile database, (.sdf).
Copied that (.sdf) file to Desktop, and when I try to open with SQL Server 2005 management studio, its showing error "make sure the application for the file type (.sdf) is installed."
How can I open this file with SQL server?
Regards
AbinashYou must install SP2 if using Management Studio Express (http://www.microsoft.com/downloads/details.aspx?familyid=6053C6F8-82C8-479C-B25B-9ACA13141C9E&displaylang=en)Erik Ejlskov Jensen, MCTS: WM App, MCITP: SQL 2008 Dev - http://erikej.blogspot.com
Please mark as answer, if this was it. -
SQL Express 2008 R2 will not start on Windows 7 Home
Ok, This used to work, and then over night my system rebooted and now I cannot start SQL Express 2008 R2 after I have unistalled, and re-installed. Cleared out the folders and the certificates, changed the Named Pipes configuration and all to
no avail. Here is my log file.
-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
2014-06-14 08:45:18.18 Server Microsoft SQL Server 2008 R2 (SP1) - 10.50.2500.0 (X64)
Jun 17 2011 00:54:03
Copyright (c) Microsoft Corporation
Express Edition (64-bit) on Windows NT 6.1 <X64> (Build 7601: Service Pack 1)
2014-06-14 08:45:18.18 Server (c) Microsoft Corporation.
2014-06-14 08:45:18.18 Server All rights reserved.
2014-06-14 08:45:18.18 Server Server process ID is 8924.
2014-06-14 08:45:18.18 Server System Manufacturer: 'SAMSUNG ELECTRONICS CO., LTD.', System Model: '700Z3A/700Z4A/700Z5A/700Z5B'.
2014-06-14 08:45:18.18 Server Authentication mode is MIXED.
2014-06-14 08:45:18.18 Server Logging SQL Server messages in file 'C:\Program Files\Microsoft SQL Server\MSSQL10_50.ACT7\MSSQL\Log\ERRORLOG'.
2014-06-14 08:45:18.18 Server This instance of SQL Server last reported using a process ID of 2820 at 6/14/2014 8:32:55 AM (local) 6/14/2014 1:32:55 PM (UTC). This is an informational message only; no user action is required.
2014-06-14 08:45:18.18 Server Registry startup parameters:
-d C:\Program Files\Microsoft SQL Server\MSSQL10_50.ACT7\MSSQL\DATA\master.mdf
-e C:\Program Files\Microsoft SQL Server\MSSQL10_50.ACT7\MSSQL\Log\ERRORLOG
-l C:\Program Files\Microsoft SQL Server\MSSQL10_50.ACT7\MSSQL\DATA\mastlog.ldf
2014-06-14 08:45:18.18 Server SQL Server is starting at normal priority base (=7). This is an informational message only. No user action is required.
2014-06-14 08:45:18.18 Server Detected 8 CPUs. This is an informational message; no user action is required.
2014-06-14 08:45:18.21 Server Using dynamic lock allocation. Initial allocation of 2500 Lock blocks and 5000 Lock Owner blocks per node. This is an informational message only. No user action is required.
2014-06-14 08:45:18.23 Server Node configuration: node 0: CPU mask: 0x00000000000000ff:0 Active CPU mask: 0x00000000000000ff:0. This message provides a description of the NUMA configuration for this computer. This is an informational
message only. No user action is required.
2014-06-14 08:45:18.25 spid7s Starting up database 'master'.
2014-06-14 08:45:18.28 spid7s FILESTREAM: effective level = 0, configured level = 0, file system access share name = 'ACT7'.
2014-06-14 08:45:18.29 spid7s SQL Trace ID 1 was started by login "sa".
2014-06-14 08:45:18.29 spid7s Starting up database 'mssqlsystemresource'.
2014-06-14 08:45:18.30 spid7s The resource database build version is 10.50.2500. This is an informational message only. No user action is required.
2014-06-14 08:45:18.32 spid7s Server name is 'MARTINDAHL-PC\ACT7'. This is an informational message only. No user action is required.
2014-06-14 08:45:18.32 spid10s Starting up database 'model'.
2014-06-14 08:45:18.32 spid7s Informational: No full-text supported languages found.
2014-06-14 08:45:18.32 spid7s Starting up database 'msdb'.
2014-06-14 08:45:18.33 Server Error: 17190, Severity: 16, State: 1.
2014-06-14 08:45:18.33 Server Initializing the FallBack certificate failed with error code: 1, state: 1, error number: -2146893802.
2014-06-14 08:45:18.33 Server Unable to initialize SSL encryption because a valid certificate could not be found, and it is not possible to create a self-signed certificate.
2014-06-14 08:45:18.33 Server Error: 17182, Severity: 16, State: 1.
2014-06-14 08:45:18.33 Server TDSSNIClient initialization failed with error 0x80092004, status code 0x80. Reason: Unable to initialize SSL support. Cannot find object or property.
2014-06-14 08:45:18.33 Server Error: 17182, Severity: 16, State: 1.
2014-06-14 08:45:18.33 Server TDSSNIClient initialization failed with error 0x80092004, status code 0x1. Reason: Initialization failed with an infrastructure error. Check for previous errors. Cannot find object or property.
2014-06-14 08:45:18.33 Server Error: 17826, Severity: 18, State: 3.
2014-06-14 08:45:18.33 Server Could not start the network library because of an internal error in the network library. To determine the cause, review the errors immediately preceding this one in the error log.
2014-06-14 08:45:18.33 Server Error: 17120, Severity: 16, State: 1.
2014-06-14 08:45:18.33 Server SQL Server could not spawn FRunCM thread. Check the SQL Server error log and the Windows event logs for information about possible related problems.
-=-=-=-=-=-=-=-=-=-=
I am logged into either the Administrator Account or my Account in which I am in the Adminstrator Group or an Admin. My OS is Windows 7 Home Premium Edition, so I cannot clear out the MSSQL groups and things I have seen online. Since this
is Express, there is limited capabilities with the config tool.
I have tried to change the log in as in the SQL Configuration tool and every item I check, Local Service, Local System, Network Service all give the same error,
"Cannot Find Object or Property. [0x80042004]
SInce I have Home Premium, MMC will not load the snap in for Local Users and groups to check out these items.
A check of the net user shows only the Administrator, Guest and my local login in Admin Account. net localgroups show these items.
*Administrators
*Distributed COM Users
*Event Log Readers
*Guests
*HomeUsers
*IIS_IUSRS
*IIS_WPG
*Performance Log Users
*Performance Monitor Users
*SQLServer2005SQLBrowserUser$MARTINDAHL-PC
*SQLServerFDHostUser$MartinDahl-PC$ACT7
*SQLServerMSSQLServerADHelperUser$MARTINDAHL-PC
*SQLServerMSSQLUser$MartinDahl-PC$ACT7
*SQLServerSQLAgentUser$MARTINDAHL-PC$ACT7
*Users
The command completed successfully.
I checked the SSL and Force Encryption is set to no and the certificates have been cleared.
I am not sure how to solve this problem. Please help. Thanks, in advance.I created a new Administrator account on the machine, mdahl. I then started the SQL Configuration Tool and changed the log on to this new account. Same problem. Here is the SQL Log.
2014-06-14 11:24:15.83 Server Microsoft SQL Server 2008 R2 (SP1) - 10.50.2500.0 (X64)
Jun 17 2011 00:54:03
Copyright (c) Microsoft Corporation
Express Edition (64-bit) on Windows NT 6.1 <X64> (Build 7601: Service Pack 1)
2014-06-14 11:24:15.83 Server (c) Microsoft Corporation.
2014-06-14 11:24:15.83 Server All rights reserved.
2014-06-14 11:24:15.83 Server Server process ID is 11448.
2014-06-14 11:24:15.83 Server System Manufacturer: 'SAMSUNG ELECTRONICS CO., LTD.', System Model: '700Z3A/700Z4A/700Z5A/700Z5B'.
2014-06-14 11:24:15.83 Server Authentication mode is MIXED.
2014-06-14 11:24:15.83 Server Logging SQL Server messages in file 'C:\Program Files\Microsoft SQL Server\MSSQL10_50.ACT7\MSSQL\Log\ERRORLOG'.
2014-06-14 11:24:15.83 Server This instance of SQL Server last reported using a process ID of 5952 at 6/14/2014 11:21:35 AM (local) 6/14/2014 4:21:35 PM (UTC). This is an informational message only; no user action is required.
2014-06-14 11:24:15.83 Server Registry startup parameters:
-d C:\Program Files\Microsoft SQL Server\MSSQL10_50.ACT7\MSSQL\DATA\master.mdf
-e C:\Program Files\Microsoft SQL Server\MSSQL10_50.ACT7\MSSQL\Log\ERRORLOG
-l C:\Program Files\Microsoft SQL Server\MSSQL10_50.ACT7\MSSQL\DATA\mastlog.ldf
2014-06-14 11:24:15.83 Server SQL Server is starting at normal priority base (=7). This is an informational message only. No user action is required.
2014-06-14 11:24:15.83 Server Detected 8 CPUs. This is an informational message; no user action is required.
2014-06-14 11:24:15.87 Server Using dynamic lock allocation. Initial allocation of 2500 Lock blocks and 5000 Lock Owner blocks per node. This is an informational message only. No user action is required.
2014-06-14 11:24:15.88 Server Node configuration: node 0: CPU mask: 0x00000000000000ff:0 Active CPU mask: 0x00000000000000ff:0. This message provides a description of the NUMA configuration for this computer. This is an informational
message only. No user action is required.
2014-06-14 11:24:15.90 spid7s Starting up database 'master'.
2014-06-14 11:24:15.91 spid7s 1 transactions rolled forward in database 'master' (1). This is an informational message only. No user action is required.
2014-06-14 11:24:15.91 spid7s 0 transactions rolled back in database 'master' (1). This is an informational message only. No user action is required.
2014-06-14 11:24:15.91 spid7s Recovery is writing a checkpoint in database 'master' (1). This is an informational message only. No user action is required.
2014-06-14 11:24:15.92 spid7s FILESTREAM: effective level = 0, configured level = 0, file system access share name = 'ACT7'.
2014-06-14 11:24:15.93 spid7s SQL Trace ID 1 was started by login "sa".
2014-06-14 11:24:15.93 spid7s Starting up database 'mssqlsystemresource'.
2014-06-14 11:24:15.93 spid7s The resource database build version is 10.50.2500. This is an informational message only. No user action is required.
2014-06-14 11:24:16.03 spid7s Server name is 'MARTINDAHL-PC\ACT7'. This is an informational message only. No user action is required.
2014-06-14 11:24:16.03 spid10s Starting up database 'model'.
2014-06-14 11:24:16.03 spid7s Informational: No full-text supported languages found.
2014-06-14 11:24:16.03 spid7s Starting up database 'msdb'.
2014-06-14 11:24:16.03 Server Error: 17190, Severity: 16, State: 1.
2014-06-14 11:24:16.03 Server Initializing the FallBack certificate failed with error code: 1, state: 1, error number: -2146893802.
2014-06-14 11:24:16.03 Server Unable to initialize SSL encryption because a valid certificate could not be found, and it is not possible to create a self-signed certificate.
2014-06-14 11:24:16.03 Server Error: 17182, Severity: 16, State: 1.
2014-06-14 11:24:16.03 Server TDSSNIClient initialization failed with error 0x80092004, status code 0x80. Reason: Unable to initialize SSL support. Cannot find object or property.
2014-06-14 11:24:16.03 Server Error: 17182, Severity: 16, State: 1.
2014-06-14 11:24:16.03 Server TDSSNIClient initialization failed with error 0x80092004, status code 0x1. Reason: Initialization failed with an infrastructure error. Check for previous errors. Cannot find object or property.
2014-06-14 11:24:16.03 Server Error: 17826, Severity: 18, State: 3.
2014-06-14 11:24:16.03 Server Could not start the network library because of an internal error in the network library. To determine the cause, review the errors immediately preceding this one in the error log.
2014-06-14 11:24:16.03 Server Error: 17120, Severity: 16, State: 1.
2014-06-14 11:24:16.03 Server SQL Server could not spawn FRunCM thread. Check the SQL Server error log and the Windows event logs for information about possible related problems.
Also, the link you provided is to Windows Vista, not Windows 7 Home Premium. However, I did look at the registry setting they said to look at in the link.
Locate the following registry subkey:
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\ProfileList
Under the ProfileList subkey, delete the subkey that is named <var>SID</var>.bak.
Note <var>SID</var> is a placeholder for the security identifier (SID) of the user account that is experiencing the problem. The <var>SID</var>.bak subkey should contain a ProfileImagePath registry entry that points to the original profile
folder of the user account that is experiencing the problem.
Exit Registry Editor.
Looking into my registry for my ProfilesList as mentioned. I have these items.
S-1-5-19 Folder with Default (Value not set), Flags (REG_DWORD) 0x0000000, ProfileImagePath (REG_EXPANDS_SZ) C:Windows\ServiceProfiles\LocalService, State (REG_DWORD) 0x0000000
S-1-5-20 Folder with Default (Value not set), Flags (REG_DWORD) 0x0000000, ProfileImagePath (REG_EXPANDS_SZ) C:Windows\ServiceProfiles\NetworkService, State (REG_DWORD) 0x0000000
Then I have an item for each of my three accounts, Administrator, Martin Dahl, and mdahl, All admin Accounts, which has no sid.bak, but a Sid, so not sure how this link helps me either. Still looking for assistance. Still not starting. -
SQL Express 2008 R2 and SQL 2005 Server SP1 in single Windows 2003 server
Hi,
I am using a Windows Server 2003 R2 Enterprise Ed SP2 OS with SQL 2005 SP1 intallled on it for our Nav 5 database.
As my backup software requires SQL Express 2008 R2 as default daabase, is it possible to install this in the same server with the SQL 2005 currently running on it? Would there be any impact on the existing SQL 2005 and the application and the Navision database
on it?
Appreciate your help.
Sharon LoHi,
I am using a Windows Server 2003 R2 Enterprise Ed SP2 OS with SQL 2005 SP1 intallled on it for our Nav 5 database.
As my backup software requires SQL Express 2008 R2 as default daabase, is it possible to install this in the same server with the SQL 2005 currently running on it? Would there be any impact on the existing SQL 2005 and the application and the Navision database
on it?
There is no issue with installing multiple versions of SQL Server on a machine.I have SS 2005 ,2008 R2 and 2012 all on same machine and they work just fine. You can install all version instances side by side and all will work independently from
each other.
Now issue which might cause problem your SQL Server 2005 is SP1 which is a Blunder IMO. Please ASAP patch it to SP4 because you are running very old version of 2005 which is unsupported by Microsoft and also SP4 includes MANY fixes for SQLServer
2005. Applying SP4 will fix many issues and will bring you under Microsoft support.
Please mark this reply as answer if it solved your issue or vote as helpful if it helped so that other forum members can benefit from it.
My TechNet Wiki Articles -
Problem accessing SQL Express 2008 R2 after VS package install
I've written an application package in Visual Studio 2010 which requires SQL Express 2008 R2. I've also created a separate setup package and set SQL Express as a prerequisite. Everything runs as expected except that after the install on target machine
I do not have adequate permissions in SQL to attach the database or set up the user via SQLCMD script. This happens on WIN 7 and up. I know it is a permissions issue with the default install of SQL but do not know how to otherwise perform the install and make
it work. Looking for someone to walk me through and resolve this issue.Hi Zanith,
Actually this forum is to discuss the VS IDE issue.
>> Everything runs as expected except that after the install on target machine I do not have adequate permissions in SQL to attach the database or set up the user via SQLCMD script
Based on your description, the important issue would be related to the permission, as my understanding, it would be related to the SQL Server setup or configuration.
So my suggestion is that you’d better post this issue to the SQL Server forum.
https://social.technet.microsoft.com/Forums/en-US/home?forum=sqlgetstarted
https://social.msdn.microsoft.com/Forums/sqlserver/en-US/home?forum=sqlexpress
I also found two cases about the SQL Server permission issue.
Reference:
http://stackoverflow.com/questions/9185142/sql-server-2008-r2-express-permissions-cannot-create-database-or-modify-users
http://serverfault.com/questions/53645/don-t-have-permission-to-access-sql-server-express-2008
Best Regards,
Jack
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
Cannot find service {0}. Parameter name: SQLWriter SQL Express 2008 R2 SP2
Hi, installing SQL Express 2008 R2 SP2 onto Windows Server 2012 R2. I had previously removed SQL Express 2012 due to failed install due to incompatibility with our SAN. (I had uninstalled it via Programs & Features,
and also by following Shanky's tips. http://social.technet.microsoft.com/wiki/contents/articles/24364.sql-server-troubleshooting-could-not-find-database-engine-startup-handle-error-during-installation.aspx).
This is what's in Detail log:
014-10-07 13:12:00 Slp: Parameter 5 : SqlEngineConfigAction_install_confignonrc
2014-10-07 13:12:00 Slp: Parameter 6 : 0x50806C41
014-10-07 13:12:01 Slp: Sco: Attempting to write hklm registry key SOFTWARE\Microsoft\Microsoft SQL Server to file C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20141007_122920\Registry_SOFTWARE_Microsoft_Microsoft SQL Server.reg_
2014-10-07 13:12:01 Slp: Sco: Attempting to write hklm registry key SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall to file C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20141007_122920\Registry_SOFTWARE_Microsoft_Windows_CurrentVersion_Uninstall.reg_
2014-10-07 13:12:01 Slp: Sco: Attempting to write hklm registry key SOFTWARE\Microsoft\MSSQLServer to file C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20141007_122920\Registry_SOFTWARE_Microsoft_MSSQLServer.reg_
2014-10-07 13:12:01 Slp: Sco: Attempting to write hklm registry key SOFTWARE\Wow6432Node\Microsoft\Microsoft SQL Server to file C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20141007_122920\Registry_SOFTWARE_Wow6432Node_Microsoft_Microsoft SQL
Server.reg_
2014-10-07 13:12:01 Slp: Sco: Attempting to write hklm registry key SOFTWARE\Wow6432Node\Microsoft\Windows\CurrentVersion\Uninstall to file C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20141007_122920\Registry_SOFTWARE_Wow6432Node_Microsoft_Windows_CurrentVersion_Uninstall.reg_
2014-10-07 13:12:01 Slp: Sco: Attempting to write hklm registry key SOFTWARE\Wow6432Node\Microsoft\MSSQLServer to file C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20141007_122920\Registry_SOFTWARE_Wow6432Node_Microsoft_MSSQLServer.reg_
2014-10-07 13:12:02 Slp: Cannot find service {0}.
The SqlEngineConfigAction_install_confignonrc part is what is in the background before the
Cannot find service {0}. Parameter name: SQLWriter pops up.
And in Event Viewer:
Log Name: Application
Source: Microsoft-Windows-RestartManager
Date: 10/7/2014 1:11:48 PM
Event ID: 10010
Task Category: None
Level: Warning
Keywords:
User: SYSTEM
Computer:
Description:
Application 'C:\31f53f2e988a36f2c31e\x64\setup100.exe' (pid 688) cannot be restarted - Application SID does not match Conductor SID..
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft-Windows-RestartManager" Guid="{0888E5EF-9B98-4695-979D-E92CE4247224}" />
<EventID>10010</EventID>
<Version>0</Version>
<Level>3</Level>
<Task>0</Task>
<Opcode>0</Opcode>
<Keywords>0x8000000000000000</Keywords>
<TimeCreated SystemTime="2014-10-07T20:11:48.532980400Z" />
<EventRecordID>4538</EventRecordID>
<Correlation />
<Execution ProcessID="732" ThreadID="2548" />
<Channel>Application</Channel>
<Computer></Computer>
<Security UserID="S-1-5-18" />
</System>
<UserData>
<RmUnsupportedRestartEvent xmlns="http://www.microsoft.com/2005/08/Windows/Reliability/RestartManager/">
<RmSessionId>0</RmSessionId>
<Pid>688</Pid>
<FullPath>C:\31f53f2e988a36f2c31e\x64\setup100.exe</FullPath>
<DisplayName>Managed SQL Server Installer</DisplayName>
<AppVersion>0</AppVersion>
<AppType>5</AppType>
<TSSessionId>2</TSSessionId>
<Status>67108865</Status>
<Reason>1</Reason>
</RmUnsupportedRestartEvent>
</UserData>
</Event>
Found one article saying you can get this if previous version not fully removed, and to do a repair of the previous version, but as I said I uninstalled it and followed all steps for cleanup, so nothing to repair.Here is the ERRORLOG file from C:\Program Files\Microsoft SQL Server\MSSQL10_50.MSSQLSERVER\MSSQL\Log. At the bottom I am seeing the error you said before was a SAN issue. I had hoped that issue was only with
SQL 2012, but it appears it is even with 2008?
If that is still the issue, I'm trying to understand if by the articles, if the SAN conflict is an OS issue or an SQL issue? In other words, is it because the OS is Server 2012? Or would this still occur if I install SQL
2008 on Server 2008 R2? I don't know that they will be willing to upgrade the SAN, and I don't really want to fool with a .VHD (virtual disk) as a workaround speaks of.
If you're asking if I did this from your article: select startup account for Database Engine services as NT Authority\SYSTEM
, I don't recall what I did this last time. I was doing that the last few days, but I think I didn't switch it to that once, just to see if I would have success. I don't know if that was this last time or not when I switched it.
Is there anywhere I can check that after the fact?
014-10-08 12:53:09.84 Server Microsoft SQL Server 2008 R2 (SP2) - 10.50.4000.0 (X64)
Jun 28 2012 08:36:30
Copyright (c) Microsoft Corporation
Express Edition (64-bit) on Windows NT 6.2 <X64> (Build 9200: )
2014-10-08 12:53:09.84 Server (c) Microsoft Corporation.
2014-10-08 12:53:09.84 Server All rights reserved.
2014-10-08 12:53:09.84 Server Server process ID is 2640.
2014-10-08 12:53:09.84 Server System Manufacturer: 'IBM', System Model: 'IBM System x -[7870AC1]-'.
2014-10-08 12:53:09.84 Server Authentication mode is WINDOWS-ONLY.
2014-10-08 12:53:09.84 Server Logging SQL Server messages in file 'c:\Program Files\Microsoft SQL Server\MSSQL10_50.MSSQLSERVER\MSSQL\Log\ERRORLOG'.
2014-10-08 12:53:09.84 Server This instance of SQL Server last reported using a process ID of 2848 at 10/8/2014 10:56:44 AM (local) 10/8/2014 5:56:44 PM (UTC). This is an informational message only; no user action is required.
2014-10-08 12:53:09.84 Server Registry startup parameters:
-d c:\Program Files\Microsoft SQL Server\MSSQL10_50.MSSQLSERVER\MSSQL\DATA\master.mdf
-e c:\Program Files\Microsoft SQL Server\MSSQL10_50.MSSQLSERVER\MSSQL\Log\ERRORLOG
-l c:\Program Files\Microsoft SQL Server\MSSQL10_50.MSSQLSERVER\MSSQL\DATA\mastlog.ldf
2014-10-08 12:53:09.84 Server Command Line Startup Parameters:
-m SqlSetup
-f
-Q
-q SQL_Latin1_General_CP1_CI_AS
-T 4022
-T 4010
-T 3659
-T 3610
-T 902
-d c:\Program Files\Microsoft SQL Server\MSSQL10_50.MSSQLSERVER\MSSQL\Template Data\master.mdf
-l c:\Program Files\Microsoft SQL Server\MSSQL10_50.MSSQLSERVER\MSSQL\Template Data\mastlog.ldf
2014-10-08 12:53:09.86 Server Warning: The server instance was started using minimal configuration startup option (-f). Starting an instance of SQL Server with minimal configuration places the server in single-user mode automatically.
After the server has been started with minimal configuration, you should change the appropriate server option value or values, stop, and then restart the server.
2014-10-08 12:53:09.86 Server SQL Server is starting at normal priority base (=7). This is an informational message only. No user action is required.
2014-10-08 12:53:09.86 Server Detected 16 CPUs. This is an informational message; no user action is required.
2014-10-08 12:53:10.00 Server Perfmon counters for resource governor pools and groups failed to initialize and are disabled.
2014-10-08 12:53:10.01 Server Using dynamic lock allocation. Initial allocation of 2500 Lock blocks and 5000 Lock Owner blocks per node. This is an informational message only. No user action is required.
2014-10-08 12:53:10.01 Server Lock partitioning is enabled. This is an informational message only. No user action is required.
2014-10-08 12:53:10.03 Server Node configuration: node 0: CPU mask: 0x00000000000000ff:0 Active CPU mask: 0x00000000000000ff:0. This message provides a description of the NUMA configuration for this computer. This is an informational
message only. No user action is required.
2014-10-08 12:53:10.05 Server Support for distributed transactions was not enabled for this instance of the Database Engine because it was started using the minimal configuration option. This is an informational message only. No
user action is required.
2014-10-08 12:53:10.06 spid7s Warning ******************
2014-10-08 12:53:10.06 spid7s SQL Server started in single-user mode. This an informational message only. No user action is required.
2014-10-08 12:53:10.06 spid7s Starting up database 'master'.
2014-10-08 12:53:10.08 spid7s Error: 5178, Severity: 16, State: 1.
2014-10-08 12:53:10.08 spid7s Cannot use file 'c:\Program Files\Microsoft SQL Server\MSSQL10_50.MSSQLSERVER\MSSQL\Template Data\master.mdf' because it was originally formatted with sector size 4096 and is now on a volume with sector
size 2097152. Move the file to a volume with a sector size that is the same as or smaller than the original sector size.
2014-10-08 12:53:10.09 spid7s Error: 5178, Severity: 16, State: 1.
2014-10-08 12:53:10.09 spid7s Cannot use file 'c:\Program Files\Microsoft SQL Server\MSSQL10_50.MSSQLSERVER\MSSQL\Template Data\master.mdf' because it was originally formatted with sector size 4096 and is now on a volume with sector
size 2097152. Move the file to a volume with a sector size that is the same as or smaller than the original sector size.
2014-10-08 12:53:10.09 spid7s Error: 5178, Severity: 16, State: 1.
2014-10-08 12:53:10.09 spid7s Cannot use file 'c:\Program Files\Microsoft SQL Server\MSSQL10_50.MSSQLSERVER\MSSQL\Template Data\mastlog.ldf' because it was originally formatted with sector size 4096 and is now on a volume with
sector size 2097152. Move the file to a volume with a sector size that is the same as or smaller than the original sector size.
2014-10-08 12:53:10.09 spid7s Error: 5178, Severity: 16, State: 1.
2014-10-08 12:53:10.09 spid7s Cannot use file 'c:\Program Files\Microsoft SQL Server\MSSQL10_50.MSSQLSERVER\MSSQL\Template Data\mastlog.ldf' because it was originally formatted with sector size 4096 and is now on a volume with
sector size 2097152. Move the file to a volume with a sector size that is the same as or smaller than the original sector size. -
SQL Server 2012 Management Studio
I need to install SQL Server 2012 Management Studio. Where can I find the link to install the program?
I need to install SQL Server 2012 Management Studio. Where can I find the link to install the program?
Hello,
SQL server management studio is not available for public download but Management studio express is there.You can download SSMS 2012 express SP1 form below link.SSMS 2012 Express SP1 has all capabilities
http://www.microsoft.com/en-gb/download/details.aspx?id=35579
download below file
SQLManagementStudio_x64_ENU.exe
Please mark this reply as the answer or vote as helpful, as appropriate, to make it useful for other readers
My TechNet Wiki Articles
Maybe you are looking for
-
Locking problem in VL02N at the time Post Goods issue
Hi, We have implemented 2 BADIs to change qty in delivery and in subsequent documents. Once we receive an IDoc with batches, then we need to change subitems qty according to no of batches. Once IDoc has updated, then PGI will do automatically. 1. LE_
-
I don't have any sound and can't adjust the brightness Macbook Pro Mid 2009 with Windows 7 64bit
I installed Windows 7 Professional 64 bit in my Macbook Pro Mid 2009 using Bootcamp 5.1.2 and from the beginning the sound is not working and cant adjust the brightness either. Tried installing all the drivers that people recommended from Realtek, nV
-
Problem IPAD 2 iOS 8.0 and also iOS 8.02
Ipad 2 - 3G - 64Gb 1) I had updated my Ipad with IOS 8.0 and has had all the problems that everybody know but especially the Ipad not turn up correctly, the screen flashed 2) 2 day ago in the morning i found the ipad in loop, the Apple icon appeared
-
2G iPhone push notification not working
Have an iPhone 2g still locked on o2! Some how the push notification isn't working! Any one know how to fix it? Dnt wanna unlock or jailbreak it to put that app called push fix!
-
Xml Schema creation - enforcing one tag at root
I have a schema such as the one below but this permits any of the global element declarations to start as the root of an xml document. I want just <table> to be at the root. <xs:element name="table"> <xs:complexType> <xs