Sql expressions field option not available in field explorer

Hello:
I would like to create a sql expression field in my report. however when I go to the field explorer panel, a sql expression fields node is not available to create one. Does anybody know why is this not an option?
Thank You Very Much

Also if you are creating based off any stored procedure or View you can't see Sql Exprn under field explorer. I think it is also databse specific. What is the databse you are using ? also what is your datasource ?
Thanks,
Sastry

Similar Messages

New DSO data fields are not available for transformations in the upwardflow

Hello,
There are data flow from
many source DSOs -> Target DSO -> Final DSO.
Different transformations are defined and activated with DTPs. This works fine and provides the desired results.
now new fields are added to the target DSO, final DSO and one of the source DSO.
When I now try to edit the transformations, the new fields are not part of the sources at the different stage.
The fields are available in the Data Source created out of a DSO but not directly when using a DSO as a data source.
Have anyone faced such a problem?
any solutions to this?
- I cannot delete all the other transformations as this is too much work to do and there is no time for it.
Regards
Kannan

We created ZMD_BS_MAT_OVP_LAYOUT. But the situation has not changed - the fields are not available for edit.

Appended field is not available in BI

Hi Gurus,
I have appended a field in the datasource, removed a hidden tick so that it will be available in BI system but after replication of datasource I still could not get this field in transfer structure. When I was checking I found that in display datasource window under "Fields" tab for that particular field "Transfer" column is uncheck, due to which the field is not available.
Now my concern is that how should I make this available in BI.
any Help will be heavily appreciated.
Thanks,
Saurabh.

Hi,
I am on BI 3.5 system.
and I didn't mean that my datasource is not in ROOSFIELD table, it is there but what you are saying is not applicable in my case. in ROOSFIELD, for the appended field the OLPTSrc version is "A" and Field Attribute is "P" which is what the ABAP program stated above will do and I was very well aware of the program.
My, ROOSFIELD output is,
2LIS_XX_XXX A ZZXXXX P
This field was not hidden earlier as well, i could get this field for selection in RSA3 and even in infopackage also.
But, the only concern is what I posted in my 1st question.
How will I get that checkbox ticked?
Thanks,
Saurabh

Preview on [device name] option not available

Preview on [device name] option not available on Folio Overlays

In v20 its available in the Folio Builder panel (iPad only, I think). You have to plug to your Mac to the iPad with the USB cable and starting the Adobe Content Viewer app on the iPad first. Otherwise check iTunes on your Mac if your iPad is listed under "Devices".
Are you using InDesign CS5.5 or InDesign CS6?
You have to be up to date with the Overlay Creator panel to v20 as well. Check for that.
Recently I had no chance with InDesign CS5 and the v20 tools installed on a Mac with OSX 10.5.8.
Uwe

I have the latest version of photoshop cc . Why is the focus select option not available ? (for selecting the in focus area)a)

I have the latest version of photoshop cc. Why is the focus selection option not available ?

Use CC 2014 menu Help>System Info... use its copy option and paste the info here. So we know your running CC 2014 not CC and that you have an enabled GPU....and latest device drivers.

Outboung Campaing: Error Unable to communicate with Enterprise Server. outbound Option not available

Hi everyone,
I'm running UCCX 8.01 + CUCM 7.1+ Cisco 7942 just for learning purpose. After creating the Outbound Campaign and imported the Contact List the call is received by the agent (call is state is received as Offering) but after press the Accept, Reject or any othe action button is received the error:
Error Unable to communicate with Enterprise Server. outbound Option not available (attached to post).
What does this mean?
Regards
Please rate all useful posts
Favor calificar todos las respuestas útiles.
LinkedIn Profile: do.linkedin.com/in/leosalcie
MDGDP, CCNA, CCNA Voice, CCNP Voice Certified

Any idea?
Please rate all useful posts
Favor calificar todos las respuestas útiles.
LinkedIn Profile: do.linkedin.com/in/leosalcie
MDGDP, CCNA, CCNA Voice, CCNP Voice Certified

WLAN override option not available for WLC 4402 - 6.0.196.

Hi All,
Its kind of weird BUT it seems that the option for WLAN override is missing.u.
I could find it on the lower version BUT not on the 6.0.196.
Please help.
Does this mean I could only set it up via the WCS and not the WLC directly.
Thank you.
Warmest Regards,
Azzafir Ariff Patel.

Hi Scott,
Thank you so much for the clarification.
Thanks again.
Quoting fella5 :
azzafir,
>
A new message was posted in the Discussion thread "WLAN override
option not available for WLC 4402 - 6.0.196.":
>
https://supportforums.cisco.com/message/3042635#3042635
>
Author : Scott Fella
Email : [email protected]
Profile : https://supportforums.cisco.com/people/fella5
>
Message:

Option not available to add skype to go number in ...

Option not available to add skype to go number in canada.... Urgent its been 1 week

venkatesh wrote:
Option not available to add skype to go number in canada.... Urgent its been 1 week
Skype To Go numbers are available in the following countries:
Australia
Canada
Chile
Denmark
Estonia
Finland
Greece
Hungary
Ireland
Latvia
Lithuania
Luxembourg
Mexico
New Zealand
Poland
Portugal
Romania
Slovenia
Singapore
South Africa
Sweden
United Kingdom
USA
TIME ZONE - US EASTERN. LOCATION - PHILADELPHIA, PA, USA.
I recommend that you always run the latest Skype version: Windows & Mac
If my advice helped to fix your issue please mark it as a solution to help others.
Please note that I generally don't respond to unsolicited Private Messages. Thank you.

HT204053 iCloud option not available on MacBook Air

Why is the iCloud option not available on my MacBook Air? It's not under the System Preferences in the Apple dropdown...only the MobileMe options are still there.

r_lopez wrote:
Why is the iCloud option not available on my MacBook Air? It's not under the System Preferences in the Apple dropdown...only the MobileMe options are still there.
iCloud won't appear in System Preferences in Snow Leopard. But, you can get some of the features of iCloud working with 10.6.
Mail AND iCal work just fine. See this article: http://bit.ly/LvVCR2
I use the iCal info on two of my own Macs and it works fine. The Address Book hack is a maybe. Read through the comments associated with the blog entry. Some folks have gotten the AB hack to work by locking the plist file.

SQL Expression Fields button not visible in Field Explorer

Hi,
On my Crystal Reports installation I can see the button SQL Expression Fields in Field Explorer but it is not visible on client's installation.
How do I make it visible? I need to create a new report with SQL query for client.
Thanks,
Ajay Audich

Commands are intended to replace the standard linked tables that must users are accustomed to.
I suppose Commands would be considered an "advanced" feature, considering that they require the developer to be able to hand write SQL (our at least copy it from another SQL editor).
If you are comfortable writing reading, writing & editing SQL, Commands will open a the door to a whole new level of control when it comes to creating your data sets.
The biggest problem w Commands is also it's greatest strength... If you're using a Command, CR will assume that you know what you're doing and will not try to rewrite or optimize your SQL in the background. You write it, CR sends it. That means if you write crappy SQL, CR will send your crappy SQL to the db server...
It also means that you can use join types that aren't available in CR and use sub-queries in in your SQL... Basically anything you can do in the db's native editor.
HTH,
Jason

TIMESTAMP field is not available in BW for the datasource 3FI_GL_P1_SI

Hello,
We have created a datasource 3FI_GL_P1_SI using transaction FAGLBW03 for the Regulatory Ledger i.e. P1.
Now, when we check data in RSA3, we see that the TIMESTAMP field is available. This field is not hidden. When we replicated this datasource in BW, the TIMESTAMP field is not present. Has anyone faced such issue before?
One more issue with this datasource is that, though the TIMESTAMP field is present in R/3, its data is not correctly populated.This field should store the data in the format (YYYYMMDDHHMMSS) but it stores the hexadecimal data. However, when we check the data of the datasource 0FI_GL_14, the data is correctly populated. Could you please let us know how to overcome these issues?
Thanks and Regards,
Nitin Chopade.

Hi,
In RSA6 check the selection option then try to replicate and Activate....
Regards,
Satya

Analyzer calculation of sum without not available data fields

Hi, I use Hyperion Analyzer 6.1.1.00206. I would like to calculate sum of some members. So I did the following Analysis Tools | Calculations and selected the sum of desired members. But if data field does not have a value (no data = n/a) then sum of members is also n/a (no data)! Is there a way to specify the "not available" is treated as 0? Thanks, Grofaty 

Yes, Click on File, then Preferences then DEFAULT FORMATTING TAB and at the bottom it gives you the option of selecting "REPLACE MISSING DATA WITH" Zero or text. I believe yours is set on text "n/a". Just select "zero" button and click ok. This should solve the problem. Best of luck Benjamin M Hoffmeyer Marketing Analyst SSP CIRCLE K

Field 'Version' not available as a source field in COPA derivation

HI,
I don't see the field 'Version' as a source field in CO-PA derivations (KEDR). Wondering why it is not available for derivation when I can see it as one of the fixed characteristics. Am I missing something in configuration?
Thanks in advance.

HI Pradeep,
I am sorry for the delayed response. Please go through note 134889 for your query.
Best Regards,
Abhisek

AR Invoice Commission field is not available in XL Reporter

Hello All,
I am trying to create a commission report in XL Reporter.
I have a 'Commission %' field in INV1 table of SAP B1 (AR invoice) which is not available when I try to pick it up from the formula builder in XL Reporter.
It is not a User-Defined Field, so my understanding was it should be in the Sales - A/R section of Formula Builder along with the other A/R Invoice line items. However, it is not there...
I was wondering if there is a way to add it to the list?
Thank you!

The following is a FMS query we use to select the part no from a row and put it to a UDF.
Select
$[$38.1.0]
The number 38 refers to the item no when looking at the system information (use View>System information) for the field you want to select.
Use this query (updated to reflect the commission field item no) and link it to a FMS on the UDF you have created.

Conditional Expressions and the note about state-field's serialized form

There's a note about state-field's serialized form in 4.6 Conditional expression chapter. Could anyone help me understanding it? It's on the page 88.
State-fields that are mapped in serialized form or as lobs may not be portably used in conditional expressions[26].
What's the serialized form? I think I understand what lobs might mean, but some additional explanation or a code snippet would be greatly appreciated.
Jacek
Jacek Laskowski
http://www.JacekLaskowski.pl

But that's my point. In the original expression the ++k and --k are evaluated first so the whole thing goes down as you described. I agree completely. But in the second case the term k is a urnary operator which would have higher precedence than the + or --- operators and therefore would be evaluated first while k is still equal to 1. Then again maybe I'm confused !
Maybe I'll just compile the program and see what I get...

Sql expressions field option not available in field explorer

Similar Messages

Maybe you are looking for