SQL Expressions in RAD -Getting error during runtime while generating rpt

Hi
We have just migrated from WSAD to RAD Version: 7.0.0.7.
The issue is: I am getting the error at the runtime when I am trying to use the SQL expression in my one of the report. The SQL Expression feature is not supported by this version of RAD. I checked the Help contents. It says
Field Objects: SQL expression fields
This report contains SQL Expression fields. These fields are not visible in this version of the Crystal Reports designer, but they will be evaluated by the system when the report is executed. New SQL Expression fields cannot be created by the designer. SQL Expression fields will remain in the .rpt file after saving and can be edited by other Crystal Reports designers
To me it seems you can use the 'SQL Expressions' in the report using some Crystal Reports designers and at the runtime it will be evaluated. So I edited my report with some Crystal Reports Designer and tested it on WSAD. It worked fine. Now since we have migrated to RAD, this is an issue since I am getting the following error:
ERROR [WebContainer : 0] com.crystaldecisions.reports.formatter.formatter.objectformatter - com.crystaldecisions.reports.dataengine.be: Failed to parse expression.
[12/17/08 15:12:14:750 EST] 0000001c SystemOut     O 15:12:14,671 ERROR [WebContainer : 0] com.businessobjects.reports.sdk.JRCCommunicationAdapter - Failed to export report
com.crystaldecisions.reports.exportinterface.exceptions.ExportException: Failed to parse expression.
     at com.crystaldecisions.reports.formatter.a.c.if(Unknown Source)
     at com.crystaldecisions.reports.formatter.a.c.a(Unknown Source)
     at com.businessobjects.reports.sdk.b.b.int(Unknown Source)
     at com.businessobjects.reports.sdk.JRCCommunicationAdapter.request(Unknown Source)
     at com.crystaldecisions.proxy.remoteagent.x.a(Unknown Source)
     at com.crystaldecisions.proxy.remoteagent.q.a(Unknown Source)
     at com.crystaldecisions.sdk.occa.report.application.dd.a(Unknown Source)
When I remove the expression fields, it works fine on RAD too.
I am using following versions:
RAD Version: 7.0.0.7
Crystal Reports for Rational Application Developer Version: 11.5.6.v20080304.
Crystal Report Runtime Support version is 11.8.4.v1094
Please let me know if somebody has faced the similar issue.
Any help/suggestions would be appreciated.
Thanks,
Kamal

Similar Messages

Getting Error in OWB while generating

Hi Every one
I am getting the following error while trying to compile my mapping in OWB. Is there any experienced person who can guide me how to come out of this issue.
Thanks in advance
RB
Cannot invoke method handleSelectionChanged in class oracle.wh.ui.tsmapping.GenerateEventHandler

I'm getting a very similar error when attempting to delete an object from my mapping in OWB 10.2.0.3:
Cannot invoke method handleObjectBeforeDeleted in class oracle.wh.ui.tsmapping.MappingGraph
I'm assuming this is some type of error with the OWB java client itself, but I'm with the OP in hoping someone out there has any idea where to start looking for answers regarding these types of errors. Thanks.

Error during Runtime: Mapping : RESOURCE_NOT_FOUND

Hello everybody,
I get the following error during runtime while mapping:
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>Application</SAP:Category>
<SAP:Code area="MAPPING">RESOURCE_NOT_FOUND</SAP:Code>
<SAP:P1>com/sap/xi/tf/_MM_FILE_REQUEST_2_RESPONSE_.class</SAP:P1>
<SAP:P2>http://mm_file_2_file</SAP:P2>
<SAP:P3>7c57acd0-19fa-11da-a907-fba1c22dd3ca</SAP:P3>
<SAP:P4>-1</SAP:P4>
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>The Resource com/sap/xi/tf/_MM_FILE_REQUEST_2_RESPONSE_.class (http://mm_file_2_file, 7c57acd0-19fa-11da-a907-fba1c22dd3ca, -1) could not be found.</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
Does anybody have an idea?
Thanks a lot
regards Mario

Could the reason be a wrong "file content convert"?
The payload:
<?xml version="1.0" encoding="utf-8" ?>
<ns:TEST.TXT xmlns:ns="http://mm_file_2_file">
<Record>
 <Row>
 <FirstName>Mario</FirstName>
 <LastName>Mueller</LastName>
 <City>Mannheim</City>
 <Country>Deutschland</Country>
</Row>
</Record>
</ns:TEST.TXT>
Structure of corresponding Data-Type
Record 1..unbounded
 Row 1
 FirstName 1
 LastName 1
 City 1
 Country 1
Regards Mario

I repeatedly get "error during rendering/encoding of menus/slideshow" message. This process is the same on my iMac, MacBook and another iMac. I have been burning dvd's int he same way for the past 12 months using the exact same steps successfully.

I keep getting "error during rendering/encoding of menus/slideshows" message. I have been burning DVD's in exactly the same way for the past 12 months and mostly on my MacBook which is 3 years old. Obviously I'm using iDVD. I purchased an iMac about a year ago and moved to use this for dvd burning without problem. A few months ago (approximately) I started to experience problems with burning with the error message above. I tried everything including starting the whole process from scratch right down to capturing the movie clips from my video recorder into iMovie, then using them in iDVD. Still the same message came up. I lost count of how many times I repeated the process with different clips and variations and the same thing happened. This was also the case with my MacBook and my husband's iMac.
After taking both of mymac's tothe service centre, having new optical thingys put it and even a new hard drive on my iMac along with a new DVD burner the same thing happened. They told me it must be the process that I am using that is incorrect!
I took my 27" iMac to an apple shop and asked them to assist me while I use the same technique as I always had. The same message came up so they tried using my clips in one of their mac's. The same message. They tried it with different clips and the same message. The only way we could get theirs to work was with a magic DVD which did not produce what I needed and was limited with only one page.
I now cannot use any of my Mac's for the intended purpose that I bought them for - to produce good media for my work! It was suggested that I purchase some non Mac software to burn DVDs which defeats the object of having a mac with iDVD in my opinion. I have a book on iDVD which is very informative and have followed the process to the letter and checked all the trouble shooting and still no remedy. It was mentioned that an up-date may have caused the problem on all my macs.
I feel that this issue should be addressed by Apple as a matter of correctness.
I now find that on the net there are many posts in forums and such like with exactly the same (almost word for word) problems. Please Apple, keep/regain your good name and sort this out.
Jayne Connelly

Thanks Bengt W for your attention to this matter. So much appreciated. And thanks for putting me right on the aim of forums (new to this). Although, you may regret asking for more information. I've added everything I can below.
The process I used is as follows:
Import recorded clips of between 5 and 15minutes each from my video recorder into i
Edit the clips (remove unwanted start and endng)
Add title to front of clips
‘Share’ them to ‘movie’ (export using QuickTime)folder in .mov format individually
Open iDVD and ‘create new project’
Select ‘favourite’ theme that I have set up forall my work dvd’s (this has been used successfully many times and I’ve triedwithout using the favourite them).
Add 2 submenus for each group of clips
Select submenu - drag and drop between 3 – 6 clips in each of the twosubmenus
Change title colours on clips
Dragand drop image into drop zones where required
In‘map’ view I check for any yellow warnings before burning to disc
In an attempt to remedy the problems I’ve tried the following:
Try new DVD discs
Try different themes (favourites and standardones)
Change images in drop zones
Start whole process again even from importingfrom camera again
Two other completely different computers (iMacand MacBook) with iDVD
Go to apple shop and use their computers to doin iDVD
Try with one clip and no menu pages added
Use a clip that I already have that did notoriginate from my camera
Turn computer off and restart
New hard drive
New optical lense (thing)
New DVD burner
Saving to disc image rather than dvd disc
Other points:
I also have a ‘flip’ and ‘iPhone’ whereI’ve imported footage camera which, although limited, records and makes videoclips and burns them to DVD through iDVD without problem.
For example, I have just gone through steps 5 - 11 using some clips that were already imported from my iphone to iPhoto and dragged across. I used a theme that I've used before which has failed and added one sub menu page where the clip went. It burned to disc image successfully.
The startup disc, I believe will have no space issues asit’s a new hard drive with no use apart from this. That could have been an issue before (I didn’t check it) butnot now.
Other technical stuff that I don't understand but you may:
I have…… Mac OS X Version 10.6.7 with all updates onit. Processor 2.8 GHz Intel Corei7. Memory 4GB 1067 MHz DDR3.
iDVD version 7.1.1
HardwareOverview:
Model Name: iMac
Model Identifier: iMac11,1
Processor Name: Intel Core i7
Processor Speed: 2.8 GHz
Number Of Processors: 1
Total Number Of Cores: 4
L2 Cache (per core): 256 KB
L3 Cache: 8 MB
Memory: 4GB
Processor Interconnect Speed: 4.8 GT/s
Boot ROM Version: IM111.0034.B02
SMC Version (system):            1.54f36
OPTIARCDVD RW AD-5680H:
Firmware Revision:     3AHB
Interconnect:    ATAPI
Burn Support:   Yes (AppleShipping Drive)
Cache:    2048KB
Reads DVD:    Yes
CD-Write: -R, -RW
DVD-Write:   -R, -R DL,-RW, +R, +R DL, +RW
Write Strategies: CD-TAO,CD-SAO, CD-Raw, DVD-DAO
Media: Toshow the available burn speeds, insert a disc and choose View > Refresh
If you can solve this you are better than the 'apple geeks' in the shop and the service technicians in the service centre (and of course me but that's no achievement).
Eagerly awaiting your reply.
Jayne

SharePoint Designer 2013 after installation getting error with runtime i.e. error writing to file Microsoft.SharePoint.Client.Runtime.Local.Resources.dll Verify that you have access to that directory

SharePoint Designer 2013 after installation getting error with runtime i.e. error writing to file Microsoft.SharePoint.Client.Runtime.Local.Resources.dll Verify that you have access to that directory
after retry..again SharePoint Designer requires the following component require to install Microsoft.NET framework version 4 i have downloaded and try to installed but fail not work please answer what to do?
Thanks and Regards, Rangnath Mali

Hi Rangnath,
For running SharePoint Designer 2013, you need to install Microsoft .NET 4.0 Framework or higher.
Please uninstall the Microsoft .NET 4.0 Framework, and install it again. After that, reboot your machine.
Best Regards,
Wendy
Wendy Li
TechNet Community Support

TS1424 I get error code 1009 while trying to download an application from app stor

I get error code 1009 while trying to download an application from app storp

You will need to do what it says, contact iTunes support. Click the Support tab above, then the Get Started link in the Contact Apple Support area and you'll be guided.
Regards.

I am getting Error code : 50 while installing update on CC

I am getting Error code : 50 while installing update on CC@

Please see Error "Failed to Install" Creative Cloud Desktop application - http://helpx.adobe.com/creative-cloud/kb/failed-install-creative-cloud-desktop.html for information on how to resolve your current error.
Regards
Rajshree

Getting Error Code U44M1P7 while upgrading, how do I correct?

Getting Error Code U44M1P7 while upgrading, how do I correct?

Which product's update you are trying to install?
Is it from Creative Cloud or perpetual?
Please check following if you are having Creative Cloud.
http://helpx.adobe.com/creative-suite/kb/error-u44m1p7-installing-updates-ccm.html

Getting error code 0xC0000005 while installing windows 8.1 x64

Please help me..
I am getting error code 0xC0000005 while installing fresh copy of windows 8.1 x64
When the installation process arrives at 87% every time I get the error code saying that installation can not be done.
I can not install windows 8.1 x64 version on my laptop.
please tell me how to solve the problem and install windows 8.1 x64 version on my laptop.
I tried with dvd-rom and usb as well, but the result is same..just stuck at 87%...can not be installed....
how to overcome it...please...
This question was solved.
View Solution.

Hi there @Achintya-only
Welcome to the HP Support Forums! It is a great place to find the help you need, both from other users, HP experts and other support personnel.
I see that you are getting an error code, when you try to install Windows 8.1 from USB or DVD. I am happy to assist.
Just to clarify, you are using a standalone Windows installation disk, you are not using a factory recovery image. Is that correct?
Have you run the hardware diagnostics on your notebook? HP Notebook PCs - Testing for Hardware Failures (Windows 8)
What operating system was on the system before, and have you made a set of recovery media, for your original factory installation?
Please let me know what you find.
Malygris1
I work on behalf of HP
Please click Accept as Solution if you feel my post solved your issue, it will help others find the solution.
Click Kudos Thumbs Up on the right to say “Thanks” for helping!

1809: An error has occured while generating a seccion key for encryption

Hi
I am trying to perform a remote control operation using Console One
1.3.6c, but evry thime getting the following error message
"1809: An error has occured while generating a seccion key for
encryption." I had looked for it in Novell site & found that the fix is
to upgrade to ZDF 6.5 SP1, but I am looking for a diffrent work around
for it. Please let me know is there any work around for this problem.
Regard
Kallol
kallol

kallol,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Do a search of our knowledgebase at http://support.novell.com/search/kb_index.jsp
- Check all of the other support tools and options available at
http://support.novell.com.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://support.novell.com/forums)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://support.novell.com/forums/faq_general.html
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://support.novell.com/forums/

Mapping error during runtime

Hi,
I have scenario like JDBC sender and file receiver.
I am able to poll with JDBC sender adapter and message has success in adapter engine.
but i am getting following error while mapping runtime.In sxmb_moni status error during mapping runtime.
Below i am giving the trace file:
<Trace level="1" type="T">Interface Mapping urn:iwaysoftware:adapter:iworacle:tablerequest jdbc_im</Trace>
<Trace level="1" type="T">RuntimeException during appliction Java mapping com/sap/xi/tf/_jdbc_mp_</Trace>
<Trace level="1" type="T">com.sap.aii.utilxi.misc.api.BaseRuntimeException: RuntimeException in Message-Mapping transformation: Cannot produce target element /ns0:PO_HEADER/PO_HEADERS_INTERFACE/INTERFACE_HEADER_ID. Check xml instance is valid for source xsd and target-field mapping fulfills requirements of target xsd at com.sap.aii.mappingtool.tf3.AMappingProgram.start(AMappingProgram.java:303) at com.sap.aii.mappingtool.tf3.Transformer.start(Transformer.java:63) at com.sap.aii.mappingtool.tf3.AMappingProgram.execute(AMappingProgram.java:77) at com.sap.aii.ibrun.server.mapping.JavaMapping.executeStep(JavaMapping.java:64) at com.sap.aii.ibrun.server.mapping.Mapping.execute(Mapping.java:91) at com.sap.aii.ibrun.server.mapping.MappingHandler.run(MappingHandler.java:90) at com.sap.aii.ibrun.sbeans.mapping.MappingRequestHandler.handleMappingRequest(MappingRequestHandler.java:94) at com.sap.aii.ibrun.sbeans.mapping.MappingRequestHandler.handleRequest(MappingRequestHandler.java:67) at com.sap.aii.ibrun.sbeans.mapping.MappingServiceImpl.processFunction(MappingServiceImpl.java:79) at com.sap.aii.ibrun.sbeans.mapping.MappingServiceObjectImpl0.processFunction(MappingServiceObjectImpl0.java:131) at sun.reflect.GeneratedMethodAccessor414.invoke(Unknown Source) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:324) at com.sap.engine.services.ejb.session.stateless_sp5.ObjectStubProxyImpl.invoke(ObjectStubProxyImpl.java:187) at $Proxy153.processFunction(Unknown Source) at sun.reflect.GeneratedMethodAccessor413.invoke(Unknown Source) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:324) at com.sap.engine.services.rfcengine.RFCDefaultRequestHandler.call(RFCDefaultRequestHandler.java:219) at com.sap.engine.services.rfcengine.RFCDefaultRequestHandler.handleRequest(RFCDefaultRequestHandler.java:169) at com.sap.engine.services.rfcengine.RFCJCOServer.handleRequest(RFCJCOServer.java:156) at com.sap.mw.jco.JCO$Server.dispatchRequest(JCO.java:7650) at com.sap.mw.jco.MiddlewareJRfc$Server.dispatchRequest(MiddlewareJRfc.java:2275) at com.sap.mw.jco.MiddlewareJRfc$Server.listen(MiddlewareJRfc.java:1614) at com.sap.mw.jco.JCO$Server.listen(JCO.java:8009) at com.sap.mw.jco.JCO$Server.work(JCO.java:8129) at com.sap.mw.jco.JCO$Server.loop(JCO.java:8076) at com.sap.mw.jco.JCO$Server.run(JCO.java:7992) at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37) at java.security.AccessController.doPrivileged(Native Method) at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100) at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170) Root Cause: com.sap.aii.mappingtool.tf3.IllegalInstanceException: Cannot produce target element /ns0:PO_HEADER/PO_HEADERS_INTERFACE/INTERFACE_HEADER_ID. Check xml instance is valid for source xsd and target-field mapping fulfills requirements of target xsd at com.sap.aii.mappingtool.tf3.AMappingProgram.processNode(AMappingProgram.java:178) at com.sap.aii.mappingtool.tf3.AMappingProgram.processNode(AMappingProgram.java:204) at com.sap.aii.mappingtool.tf3.AMappingProgram.processNode(AMappingProgram.java:204) at com.sap.aii.mappingtool.tf3.AMappingProgram.start(AMappingProgram.java:298) at com.sap.aii.mappingtool.tf3.Transformer.start(Transformer.java:63) at com.sap.aii.mappingtool.tf3.AMappingProgram.execute(AMappingProgram.java:77) at com.sap.aii.ibrun.server.mapping.JavaMapping.executeStep(JavaMapping.java:64) at com.sap.aii.ibrun.server.mapping.Mapping.execute(Mapping.java:91) at com.sap.aii.ibrun.server.mapping.MappingHandler.run(MappingHandler.java:90) at com.sap.aii.ibrun.sbeans.mapping.MappingRequestHandler.handleMappingRequest(MappingRequestHandler.java:94) at com.sap.aii.ibrun.sbeans.mapping.MappingRequestHandler.handleRequest(MappingRequestHandler.java:67) at com.sap.aii.ibrun.sbeans.mapping.MappingServiceImpl.processFunction(MappingServiceImpl.java:79) at com.sap.aii.ibrun.sbeans.mapping.MappingServiceObjectImpl0.processFunction(MappingServiceObjectImpl0.java:131) at sun.reflect.GeneratedMethodAccessor414.invoke(Unknown Source) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:324) at com.sap.engine.services.ejb.session.stateless_sp5.ObjectStubProxyImpl.invoke(ObjectStubProxyImpl.java:187) at $Proxy153.processFunction(Unknown Source) at sun.reflect.GeneratedMethodAccessor413.invoke(Unknown Source) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:324) at com.sap.engine.services.rfcengine.RFCDefaultRequestHandler.call(RFCDefaultRequestHandler.java:219) at com.sap.engine.services.rfcengine.RFCDefaultRequestHandler.handleRequest(RFCDefaultRequestHandler.java:169) at com.sap.engine.services.rfcengine.RFCJCOServer.handleRequest(RFCJCOServer.java:156) at com.sap.mw.jco.JCO$Server.dispatchRequest(JCO.java:7650) at com.sap.mw.jco.MiddlewareJRfc$Server.dispatchRequest(MiddlewareJRfc.java:2275) at com.sap.mw.jco.MiddlewareJRfc$Server.listen(MiddlewareJRfc.java:1614) at com.sap.mw.jco.JCO$Server.listen(JCO.java:8009) at com.sap.mw.jco.JCO$Server.work(JCO.java:8129) at com.sap.mw.jco.JCO$Server.loop(JCO.java:8076) at com.sap.mw.jco.JCO$Server.run(JCO.java:7992) at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37) at java.security.AccessController.doPrivileged(Native Method) at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100) at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)</Trace>
I tried with all options using mapping functions.But the same eror is coming.
When i tested my mapping program its successfully running in map bulider without any errors.
The error occuring at runtime.
Source strcture :
<?xml version="1.0" encoding="UTF-8"?>
<ns0:resultset xmlns:ns0="urn:iwaysoftware:adapter:iworacle:tablerequest">
 <row>
 <interface_header_id>928822</interface_header_id>
 </row>
</ns0:resultset>
Target structure:
<?xml version="1.0" encoding="UTF-8"?>
<ns0:PO_HEADER xmlns:ns0="urn:iwaysoftware:adapter:iworacle:tablerequest"><PO_HEADERS_INTERFACE><INTERFACE_HEADER_ID>928822</INTERFACE_HEADER_ID></PO_HEADERS_INTERFACE></ns0:PO_HEADER>
Can any body suggest what causing the problem.
Regards
Usman

Hi Usman,
Test your mapping in IR with the payload from SXMB_MONI. You can refer michal's weblog on <a href="/people/michal.krawczyk2/blog/2005/09/16/xi-how-to-test-your-mapping-in-real-life-scenarios to test your mapping (in real life scenarios)</a>
In other words you copy the XML message from monitoring and exectute the mapping in Integration Builder with maximal trace to get the reason.
So what you can do is check ur runtime payload in sxmb_moni with,
IR>message mapping>test tab>give values>test-->source xml
Also i thought i will give you some details on what ur doing, so maybe you can compare it with what uhave done and see where you have gone wrong.
A JDBC sender adapter has 2 essential fields,
1. SQL Statement
2. Update Statement
Your SQL statement will contain your SELECT statement and once your SQL statement is executed, UPDATE statement is executed. This is done so that records that have been selected by the SQL statement should not be selected again as the JDBC sender adapter will poll over the database for every poll interval.
If you want to SELECT something from your Database, then you will have to go for a JDBC sender adapter.
This is how a SENDER JDBC Adapter works,
When you are using your JDBC as a sender, then your JDBC will poll over your database and select the rows that satisfy your Select Query.
In your case, as you are dealing with multiple tables, you can write a stored proceudre for your Database, and call this stored procedure in your Sender JDBC adapter in the SELECT field of your JDBC adapter.
Go through this blog for stored procedures.
/people/sriram.vasudevan3/blog/2005/02/14/calling-stored-procs-in-maxdb-using-sap-xi
For Configuring the Sender JDBC Adapter refer go through <a href="http://help.sap.com/saphelp_nw04/helpdata/en/7e/5df96381ec72468a00815dd80f8b63/content.htm">Configuring the Sender JDBC Adapter</a>
Also go through this blog and see if it helps you.
/people/prasadbabu.nemalikanti3/blog/2006/02/27/collecting-and-bundling-vendor-records-from-different-multiple-interfaces-file-systempeoplesoft-and-sending-to-sap-r3-system-part-2
To access any Database from XI, you will have to install the corresponding Driver on your XI server.
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/3867a582-0401-0010-6cbf-9644e49f1a10
I hope this helps...
Regards,
Abhy
Message was edited by: Abhy Thomas

SQL Expression in Filter conditon Error in OBIEE 10g

Hi
I am getting an error while giving the sql in the sql expression in filter conditon.
The sql expression I am giving is:SELECT MAX("Task Runs"."Start Time") saw_4 FROM "Analysis"'
Error:
Error Codes: YQCO4T56:OPR4ONWY:U9IM8TAC:OI2DL65P
Odbc driver returned an error (SQLExecDirectW).
State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 27002] Near <SELECT>: Syntax error [nQSError: 26012] . (HY000)
SQL Issued: {call NQSGetLevelDrillability('set variable disable_cache_hit=1; SELECT "Task"."Task Name" saw_0, "Task Runs"."Time in Seconds" saw_1, TOPN("Task Runs"."Time in Seconds", 10) saw_2, "Task Runs"."Start Time" saw_3 FROM "Analysis" WHERE "Task Runs"."Start Time" >= SELECT MAX("Task Runs"."Start Time") saw_4 FROM "Analysis"')}
But when I individualy select start time column and check max of it the data comes fine, but if I am giving in sql expression it errors out.
Please suggest.

Hi Sini,
I have tried taking the second suggestion but I get no result for that
"Task Runs"."Start Time" -->Filter->Advanced button->Convert this in SQL->
WHERE "Task Runs"."Start Time" >= MAX("Task Runs"."Start Time" by "Task"."Task Name")
Here I did not understand the code Task Runs"."Start Time" by "Task"."Task Name". If possible elaborate.
And 1st suggestion the query formed just looks the query u suggested.
Unable to figure out what exactly is the problem.
Try something as in with 2 queries
http://www.cool-bi.com/Tweaks/JoinsinAnswers.php
or else
"Task Runs"."Start Time" -->Filter->Advanced button->Convert this in SQL->
WHERE "Task Runs"."Start Time" >= MAX("Task Runs"."Start Time" by "Task"."Task Name")
not sure how it works but this is other way of your sql in BI

Getting error during posting A/P invoice and A/P credit memos

We are intermittently getting this error during A/P invoice.
       When i am doing the full cycle of Purchase like
        Purchase Order
        Goods Receipts PO
       A/P. Invoice.
     At the time of A/P. Invoice the date has been coppied from the Goods Receipt's PO, i am getting the error, this error not comes regularly, only for few transcations,
     Please guide to me.
         Error is
       " No matching records found 'G/L Accounts' (OACT) (ODBC-2028)
                              Message 131 - 183 "
          Patch level is 27 and version is 2005B

Hello Prasad,
Before add A/P invoice, are you changing the price to a lower price, either by changing amount in the 'price' column or by giving a higher discount at the header level ? As far as I know, in a non continuous stock system company with the 'Use Negative Amount for Reverse Transaction' setting not ticked.
Another solution could be as follows (just check in your SAP B1 installation) :
When the user chooses User Defined Chart of Accounts under Administration -> System Initialization -> Company details -> Basis Initialization tab , the default accounts remain in the "G/L Account Determination", "Define Tax", "Define Warehouse" windows under Administration -> Definitions -> Financials and Administration -> Definitions -> Inventory. User has to check and define all accounts.
My reference is SAP notes 771489.
Another related issue is whether you are using rounding when adding a marketing document. If yes, you must define rounding account in 'Administration' > 'System Initialization' ->'G/L Account Determination' -> 'General' tab page under "Rounding Account" field.
Rgds,

Getting Error of Runtime Exceeded while generating OTF for PDF in smartform.

Hi All,
I am getting a error of runtime exceeded while generating OTF file for PDF in smartform through FM. The report is taking too much time before giving the output...and most of the time going to dump saying report has exceeded the runtime. All is working well till the Smartform FM reached. I debugged this FM and found that the TABLES parameter is having problem, may be there are too many tables in that parameter.Please help. Below is the code-
CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
EXPORTING
    formname           = c_form_name
IMPORTING
    fm_name            = v_fm_name
EXCEPTIONS
    no_form            = 1
    no_function_module = 2
    OTHERS             = 3.
CALL FUNCTION   v_fm_name
EXPORTING
    control_parameters      = wa_control
    output_options             = wa_output
    user_settings                = 'X'
    spl_gl                         = p_spl_gl
    open_dt                      = p_budat
    bukrs                         = p_bukrs
    w_check                    = w_check
    w_check1                   = w_check1
IMPORTING
*   document_output_info =
    job_output_info                  = wa_otf
*   job_output_options     =
TABLES
    kna1                       = t_kna1
    bsid_p                     = t_bsid_p
    bsid                         = t_bsid
    TEXT                       = t_text
    spl                           = t_spl
    bsid_x                      = t_bsid_x
    bsid_l                       = t_bsid_l
    bsid_h                      = t_bsid_h
    bsid_q                     = t_bsid_q
    bsid_tot                   = t_bsid_tot
EXCEPTIONS
    formatting_error           = 1
    internal_error             = 2
    send_error                 = 3
    user_canceled              = 4
    OTHERS                     = 5

Hi
Yes as Eltan says you need to consider there are two blocks of abap program:
- the first one is the driver program (but it seems there's no problem here because it called the smartform quickly)
- the second one is inside the smartform (It's possible to write abap routine in the smartform), and it seems the problem could be here
The variable c_form_name has the name of the smartform, you can manage it by transaction SMARTFORMS
but now it's not possible to say you why the print takes too long time, you need to do a trace
Max

Getting error during deleting a page in 4.1

I am getting the following error while deleting a page. I don't have any DA in the page.
ORA-04091: table APEX_040100.WWV_FLOW_PAGE_DA_EVENTS is mutating, trigger/function may not see it ORA-06512: at "APEX_040100.WWV_FLOW_PAGE_DA_ACTIONS_T1", line 35 ORA-04088: error during execution of trigger 'APEX_040100.WWV_FLOW_PAGE_DA_ACTIONS_T1'

Hi pkpanda,
This has come up a few times now, mostly seems to happen where the page is originally created as a copy of an existing page, that contains a DA, or where a DA references a region. Is there any chance you could send me an export of the application, to the address in my profile? It would really help to see exactly what's going on.
Regards,
Anthony

SQL Expressions in RAD -Getting error during runtime while generating rpt

Similar Messages

Maybe you are looking for