SQL Logging not working in SSIS 2008
Hello,
I have packages created in SSIS 2008 and I am trying to enable logging in them. I specified a SQL Server provider and gave it a working SQL Server DB connection as the configuration. I chose to log all the events from the Details tab, then I executed the package. It ran without errors, but no logging occured. Actually neither the logging table, nor the stored procedure that should perform the loggign were created. These exact steps used to work with SSIS 2005 and they'd generate the table, stored proc and start storing logging information. For testing, I also added to the same package logging options a text logging and a SQL Profiler log providers. These were created successfully and have logs entered in them. I tried different DB connections on different servers, but still the table and sp are not even getting created. Any ideas?
Best Regards,
Ketara
Had the same problem. When I read the documentation Microsoft explicitly states that you must use an OLEDB provider for SQL Server logging. I checked, and mine was the "SQL Server Native Client" rather than the "Microsoft OLE DB Provider for
SQL Server". When I switched out the driver, it worked.
The log table is under System Tables called: dbo.sysssislog
The stored procedure that populates the table is under System Stored Procedures called: dbo.sp_ssis_addlogentry
Similar Messages
-
Force encryption on SQL Server not working?
Hello Everyone,
I'm running SQL Server 2008 64-bit. I've installed a self-signed cert on the box and set "Force Encryption" and restarted SQL server.
I setup a client machine to trust the authority of the cert installed on the server. When I connect to that SQL server from SSMS from a client machine and select the "encrypt connection" option in the client Connection properties, SSMS correctly complains
that the cert on the server does not match the computer name I asked to log into . This is because, although the cert is trusted, the dns name dos not match the CN in the cert <- Perfect, exactly what I am expecting.
When I connect to the same SQL server from the same client but UNCHECK "encrypt connection" on the client, I'm able to login. Considering I've checked the "Force Encryption" on the server, the server should have rejected the connection. Why not?
Ameer DeenHi all,
We are implementing a Merge Synchronization solution which involves three SQL Servers located on three Azure locations worldwide and one on-premises location. We need to secure communications between all servers. We are evaluating the encryption of all server
communications through SSL:
http://technet.microsoft.com/en-us/library/ms191192.aspx
When we configure one server (let’s call it server A) to accept only encrypted connections (with Force Encryption=Yes) we still can connect from other server (let’s call it server B) that do not have the certificate installed. We would expect the server
B to fail in the attempt of connect as server A should only accept encrypted communications and those should need the certificated to encrypt/decrypt everything (commands and data).
We have also review the following forum post that is very similar to this one:
http://social.msdn.microsoft.com/Forums/sqlserver/en-US/bde679d9-ff83-4fa7-b402-42e336a97106/force-encryption-on-sql-server-not-working
In all cases the Microsoft answer is:
“When the
Force Encryption option for the Database Engine is set to YES, all communications between client and server is encrypted no matter whether the “Encrypt
connection” option (such as from SSMS) is checked or not. You can check it using the following DMV statement”
When we run the provided DMV statement to check if encryption is enabled:
-- To check whether connections are encrypted between server and clients
SELECT encrypt_option
FROM sys.dm_exec_connections
We get “TRUE”. So theoretically encryption is enabled.
Then:
Why can we run SQL statements against server A from server B (with SSMS) without any certificate?
Are we wrong when we expect server A to refuse any client that do not have the right certificate?
How can server B, without any certificate, decrypt the data encrypted by server A?
Our intention is to encrypt all server in the same way so all of them will accept only encrypted communications. We are assuming that the Merge Agent will be able to communicate with the Publisher and the Subscriber through this encrypted environment. May
anyone please confirm ti?
Thanks for your help.
Best Regards
Benjamin Moles -
What will you do if any SQL is not working.in oracle 10g...apps 11.5.10.2
What will you do if any SQL is not working. in oracle 10g....apps 11.5.10.2
928714 wrote:
yes sir.If you help me in answering my questions i wll be very thankful to you sir.
tnx,I haven't a clue.
As you have been advised in many of your posts, go study the documentation for whichever specific topic you are interested in.
For me to answer your questions, I would need to go get that documentation.
Then I would need to read that documentation.
Then I would need to write a forum post that interprets what I think I learned from that documentation.
It is so very much faster if YOU go do that instead of posting to a forum and expecting others to do it. You will remember what you study for a lot longer time if you teach yourself. -
Sql is not working after changing from MsAccess into sql server
Following Sql is not working after changing from MsAccess into sql server.
sum(trn.sales) as sales,
sum(trn.cost) as cost,
sales - cost as profit // Here is not working . can we not use sales a column. Please advise
from trn
Kind Regards
pol
polachanIt will not work if use two different column from the table or column from two different table
Example
sum(trn.sales * trn.rate) as salesAmount,
sum(trn.cost) as cost,
sum(trn.salesAmount)-sum(trn.cost) as profit ----- Here is not working . can we not use sales a column. Please advise
from trn
Regards
polachan -
Crystal Report Export not working in Server 2008
Hi
Please Help..
I am Using Crystal report Report 9 with VB 6 and SQL Server 2008. All my Client PC s (Windows XP SP3) are able to export the reports in any format but with my SERVER - (Windows Server 2008 (32 Bit)) it isn't possible. The Button is very much enabled
but when I click on it, Nothing happens.. Please Help...Hi,
I would like to suggest you try to run SAP Crystal Reports under Compatibility Mode to check if it works.
Run in compatibility mode with administrative privilege
================================
1. Right-click the .exe file of the SAP Crystal Reports program and choose
Properties.
2. Switch to the
Compatibility tab.
3. Please check the
Run this program in compatibility mode for and choose
Windows XP (Service Pack 3).
4. Check the
Run this program as an administrator box under the
Privilege Level.
5. Click
Apply, click OK.
Note: If the option is unavailable when running this program as an administrator, it means that either the application is blocked from always
running elevated, the application does not require administrative credentials to run, or you are not logged into the computer as an administrator.
If it does not work, it is high recommended to contact your local SAP Support Engineers for further assistance. They are more familiar with their own
product.
Regards,
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. -
Dear Team
i need solution from Microsoft for the issue;
My infrastructure
- Windows Server 2008 R2 (Role - AD and Terminal Service)- Updated
- Client Machine running with windows 7 pro (Updated)
- Client Using RDP Client to connect Windows 2008 Terminal Session
- All are working fine, but Redirect Printing is not working (Through Windows 7 Pro) ... (HP Laser Jet 1020 plus - attached in Client PC)
- it is working fine from Windows XP
- i was done All terminal setting in both end, also try RDP Login with Administrator User, but issue is not resolve;
What Microsoft can say about the issue;
Thanks & Regards,
VIMAL PRAJAPATI | 09824111686Have you checked the Print Service log in event viewer?
Here's How.
I have the Microsoft XPS driver on my clients, so I use that fact to my advantage below.
Click Start Button/Administrative Tools/Remote Desktop Services/Remote Desktop Services Manager on the RDSH server
Click the Sessions tab. PC’s are listed Under Client Name by their computer name. Take Note of the corresponding
ID. We will use this to locate the Printer information in the Event Log.
In the Event Log open Application and Services Logs/Microsoft/Windows/Print Service/Admin/ and Find the Event ID 823 entry that has the corresponding ID from the sessions tab you previously noted.
This Event Log Entry is created at Logon and you can only get the session ID when they are logged in.
This tells you what client printer was mapped for the client. The name that appears is the name of the Printer that was set on the client when the printer was installed.
See if you see any errors here.
If you see Event Id 823 with the following message “The default printer was changed to Microsoft XPS Document Writer,winspool,Ne00:. See the event user data for context information.” Twice in a row with no other messages in between, and the first occurs
at the time the user logged in, then their printer was not properly redirected.
You see the Microsoft XPS driver mapped for each session prior to Easy Print redirecting the client machine’s Default Printer.
Since your printer is the HP 1020 I would bet the driver on the client does not work with Easyprint. I would try the the HP Universal Print Driver or the driver for a printer that is very close, like the HP 1018.
Thanks,
Jeremy -
Microsoft.SqlServer.ManagedDTS not recognized in SSIS 2008
I recently got a new computer at work and when I open a script task in an SSIS project I get the following error:
Error 4 Reference required to assembly 'Microsoft.SqlServer.ManagedDTS, Version=10.0.0.0, Culture=neutral, PublicKeyToken=89845dcd8080cc91' containing the type 'Microsoft.SqlServer.Dts.Runtime.Variables'. Add one to your project.
I never got this error before with my previous machine. i surely don't need to add a reference in every script task do I?
Thanks,
RichRich,
You open a project in VS 2010 perhaps and SSIS 2008 is not installed.
By the way here I found a blog post about the error that covers it very well offering fixes:
http://blogs.msdn.com/b/jason_howell/archive/2010/08/18/visual-studio-2010-solution-build-process-give-a-warning-about-indirect-dependency-on-the-net-framework-assembly-due-to-ssis-references.aspx
Arthur My Blog -
Insert SQL does not work properly when called using CALL
I have a stored procedure (TEST_SP) which is used to insert a record in this perticular case. The SQL statement is 2526 characters long. I'm using
dim Params : Params=chr(1) & "Insert query" & Chr(1) & "=300"
runsql=&"{call TEST_SP(?,?)}"&Params
dim db : db=dbSelect("",0,"","")
dbExecSQL db,runsqlto execute the stored procedure. I'm facing an issue when the 2000th character on the insert SQL (pUPDSQL) is a single quote, where the SQL is not getting executed (i.e. record is not getting created).
The same stored procedure and the same SQL when run as below
runsql=runsql&"DECLARE "
runsql=runsql&"PUPDSQL VARCHAR2(4000); "
runsql=runsql&"PRES VARCHAR2(300); "
runsql=runsql&"BEGIN "
runsql=runsql&"PUPDSQL := 'INSERT query..."
runsql=runsql&"PRES:=300; "
runsql=runsql&"MRT_LKIDFULUP(PUPDSQL => PUPDSQL,PRES => PRES); "
runsql=runsql&"END; "
dim db : db=dbSelect("",0,"","")
dbExecSQL db,runsqlis working fine. Does anyone know if there is a limitaion in ODBC Call function or any explanation to above behaviour? I'm connecting to a Oracle 11g database using Microsoft ODBC for Oracle driver on Window 7
The stored procedures:
create or replace procedure TEST_SP(pUPDSQL IN VARCHAR2,pRES OUT VARCHAR2)
AS
BEGIN
DECLARE
emsg VARCHAR2(100);
BEGIN
if pUPDSQL<>'-1' then
emsg:='Cant exec UPDATE';
EXECUTE IMMEDIATE pUPDSQL;
if SQL%RowCount=0 then
pRES:='ERR:No row updated';
return;
end if;
end if;
pRES:='OK:';
EXCEPTION
WHEN OTHERS THEN
pRES:='ERR:' || emsg;
END;
END;Edited by: BluShadow on 11-Dec-2012 15:47
added {noformat}{noformat} tags for readability. Please read {message:id=9360002} and learn to do this yourself in future.... I'm facing an issue when the 2000th character on the insert SQL (pUPDSQL) is a single quote, ...Perhaps you need two single quotes? like:
runsql=runsql&"PUPDSQL := 'INSERT query...Values(..,..,,,''This value in two single quotes'',..,...)' "
... I'm connecting to a Oracle 11g database using Microsoft ODBC ...Dump windoze ODBC and better use the Oracle client ODBC.
:p -
PL/SQL program not working when connect database via SqlNet
Hi,
This is a segment of a PL/SQL program before opening a cursor using input descriptor. It is working fine ( to get the value of unOutputCount ) without connect to a database via SqlNet, can anyone tell me why it is not working ( unOutputCount return 0)while connecting to a database via SqlNet and how to make it work without opening a cursor before DESCRIBE OUTPUT ...?
EXEC SQL ALLOCATE DESCRIPTOR GLOBAL 'input_111'
WITH MAX 100;
EXEC SQL ALLOCATE DESCRIPTOR GLOBAL 'output_111'
WITH MAX 100;
EXEC SQL PREPARE STMT1 FROM :psSqlStatement;
EXEC SQL DECLARE CURSOR1 CURSOR FOR STMT1;
EXEC SQL DESCRIBE INPUT STMT1
USING DESCRIPTOR GLOBAL 'input_111';
/* Get count of input parameters in statement */
EXEC SQL GET DESCRIPTOR GLOBAL 'input_111' :unInputCount = COUNT;
EXEC SQL DESCRIBE OUTPUT STMT1
USING DESCRIPTOR GLOBAL 'output_111';
/* Get count of output parameters in statement */
EXEC SQL GET DESCRIPTOR GLOBAL 'output_111'
:unOutputCount = COUNT;Hi,
Welcome to Oracle OTN Forums!
I changed your code a little. I think this help you
CREATE OR REPLACE
PROCEDURE xx_test
IS
v_pid VARCHAR2(100);
v_cn VARCHAR2(100);
v_id VARCHAR2(1000);
v_val VARCHAR2(1000);
CURSOR C1
IS
(SELECT product_id, 'PRODUCT_ID' cn
FROM product1 );
BEGIN
FOR V1 IN C1
LOOP
FETCH C1 INTO v_pid, v_cn;
dbms_output.put_line('==== '||v_pid||'==== '||v_cn);
EXECUTE IMMEDIATE
'SELECT product_id, DECODE(COUNT (product_id),1,MAX (product_id))||'''||V_CN||''' as val
FROM product1
WHERE product_id =:a
GROUP BY product_id)' INTO v_id, v_val USING v_pid;
dbms_output.put_line('==== '||v_id||'==== '||v_val);
EXECUTE IMMEDIATE 'UPDATE product2 SET '||v_cn||' = ' ||''''|| v_val ||''''|| ' WHERE product_id = :b' USING v_pid;
dbms_output.put_line('++++ '||v_cn||'++++ '||v_val||'++++ '||v_pid);
END LOOP;
END xx_test; -
My first PL/SQL block not working with using Select query within begin
I am new to PL/SQL , just started with basics of BLOCKS .
I am having a query here in executing a block .
When i am doing a insert oprtation in Blocks Begin method everything is working fine , but when ever i tried to do select operation , some error is being thrown .
First of all This is my Table :
select from try :*
KEY VALUE
Key Value
Key1 Value1
Key2 Value2
Key3 Value3
======================
This is the code which is not working : Please see the code and tell me what is the problem .
DECLARE
v_KEY VARCHAR2(20);
v_VALUE VARCHAR2(20);
BEGIN
select key into v_KEY FROM try where v_value='Value' ;
dbms_output.put_line(v_KEY);
END;
When i run this code , it is saying Data Not Found on this line " select key into v_KEY FROM try where v_value='Value' ;"
wheer when i run tis individually it worked fine :
select KEY FROM try where VALUE='Value' ;"
please share your ideas .as why it isn't running ??
Edited by: user10503747 on Sep 20, 2010 3:16 AMHi,
user10503747 wrote:
I am new to PL/SQL , just started with basics of BLOCKS .
I am having a query here in executing a block .
When i am doing a insert oprtation in Blocks Begin method everything is working fine , but when ever i tried to do select operation , some error is being thrown .
First of all This is my Table :
select from try :*
KEY VALUE
Key Value
Key1 Value1
Key2 Value2
Key3 Value3
======================
This is the code which is not working : Please see the code and tell me what is the problem .
DECLARE
v_KEY VARCHAR2(20);
v_VALUE VARCHAR2(20);
BEGIN
select key into v_KEY FROM try where v_value='Value' ;
dbms_output.put_line(v_KEY);
END;
When i run this code , it is saying Data Not Found on this line " select key into v_KEY FROM try where v_value='Value' ;"
wheer when i run tis individually it worked fine :
select KEY FROM try where VALUE='Value' ;"
please share your ideas .as why it isn't running ??
Edited by: user10503747 on Sep 20, 2010 3:16 AMInstead of:
{code}
select key into v_KEY FROM try where v_value='Value' ;
{code}
perhaps you meant something like:
{code}
v_value := 'Value1';
select key into v_KEY FROM try where v_value=Value ; -- No quotes
{code}
Until you assign a vlue to a variable, like v_value, it is NULL, so your original statement was equivalent to
{code}
select KEY FROM try where NULL='Value' ;
{code}
In PL/SQL, a SELECT ... INTO statement must return exactly one row, or else you will get an error (either NO_DATA_FOUND or TOO_MANY_ROWS). This is different from SQL, where a query cn return any number of rows, including 0, without raising an error. -
Inline transform for Sql Query not working in SAP MII 12.1 Version 12.1.8 B
Hi All,
I applied an xslt for an sql query which returns an xml file.
I used inline transform icon in sql query to load an xsl file which has to return me a string
Any idea why is not working for me..?
My Sample XML file:
<?xml version="1.0" encoding="UTF-8"?>
<?xml-stylesheet type="text/xsl" href="/XMII/CM/BatchDisposition/BatchQueueManagement/StyleSheets/ProductXsl.xsl"?>
<Rowsets DateCreated="2011-05-05T07:27:45" EndDate="2011-05-05T07:27:45" StartDate="2011-05-05T06:27:45" Version="12.1.8 Build(20)">
<Rowset>
<Columns>
<Column Description="ProductName" MaxRange="1" MinRange="0" Name="ProductName" SQLDataType="12" SourceColumn="ProductName"/>
</Columns>
<Row>
<ProductName>Asprin 100mg Tablets 12 x10 strip</ProductName>
</Row>
<Row>
<ProductName>Asprin 300mg Tablets 12 x10 strip</ProductName>
</Row>
<Row><ProductName>Ibprooven 200mg Tablets 12 x 10 strip</ProductName></Row>
<Row><ProductName>RipTide 50mg Tablets 40 x10 strip</ProductName></Row>
<Row><ProductName>Seroquel 200mg Tablets 6 x10 strip</ProductName></Row>
<Row><ProductName>Seroquel 400mg Tablets 12 x10 strip</ProductName></Row>
</Rowset>
</Rowsets>
My Sample XSl File:
<?xml version="1.0" encoding="ISO-8859-1"?>
<xsl:stylesheet version="1.0"
xmlns:xsl="http://www.w3.org/1999/XSL/Transform">
<xsl:template match="/">
<xsl:text>["</xsl:text>
<xsl:for-each select="Rowsets/Rowset/Row">
<xsl:value-of select="ProductName"/>
<xsl:if test="position() < last()">
<xsl:text>","</xsl:text>
</xsl:if>
<xsl:if test="position()=last()">
<xsl:text>"]</xsl:text>
</xsl:if>
</xsl:for-each>
</xsl:template>
</xsl:stylesheet>
Any Suggestions are Welcome:
ThanksSomething like this should work...
<?xml version="1.0" encoding="UTF-8"?>
<xsl:stylesheet version="1.0" xmlns:xsl="http://www.w3.org/1999/XSL/Transform">
<xsl:template match="/">
<Rowsets DateCreated="{Rowsets/@DateCreated}" Version="{Rowsets/@Version}" StartDate="{Rowsets/@StartDate}" EndDate="{Rowsets/@EndDate}">
<xsl:copy-of select="/Rowsets/FatalError"/>
<xsl:copy-of select="/Rowsets/Messages"/>
<Rowset>
<Columns>
<Column Description="Mycol1" MaxRange="1" MinRange="0" Name="Mycol1" SQLDataType="12" SourceColumn="Mycol1" />
</Columns>
<Row>
<Mycol1>
<xsl:text>["</xsl:text>
<xsl:for-each select="/Rowsets/Rowset/Row">
<xsl:value-of select="." />
<xsl:choose>
<xsl:when test="position() < last()"><xsl:text>","</xsl:text></xsl:when>
<xsl:otherwise><xsl:text>"]</xsl:text></xsl:otherwise>
</xsl:choose>
</xsl:for-each>
</Mycol1>
</Row>
</Rowset>
</Rowsets>
</xsl:template>
</xsl:stylesheet> -
SQL (Reverse) not working in Forms 6i
Hi:
Env 6i c/s 8i DB.
SELECT REVERSE ( '321' ) FROM DUAL works in SQL*Plus but does not accept the REVERSE function from within a Trigger. I could put the logic in a Package on the DB but I'd like to know why it does not work in F6i ?
Thanks
N.Forms 6i uses an older version of PL/SQL than the database, so it does not recognize the newly introduced function. You will need to create a database function to call from the form.
-
SQL Code not working in Forms Developer?
Hi all,
I'm using Oracle 10g and I have th following code running on iSQL+ but not working on Forms and I got the following erro
The SQL code:
select returningreason
from (
select returningreason,
dense_rank() over (partition by 1 order by count(*) desc) as drnk
from returned_goods
group by returningreason)
where drnk = 1;And the error happens near the word over to the right and the error statement is:
Error 103 at line 18, column 19
Encountered the symbol "(" when expecting one of the following:
, formThanks in advance :)Triggers are compiled in forms so need to use only the features available to forms, which doesn't include all the new stuff in the database.
select over partition
NVL2They don't work in forms and reports too.
Also if you use them in record Group
Forms/SQL Compiler was not lined up to the database(10G).
Meanwhile,for example. Pipelined TABLE and relative Select work in Reports AND Forms. -
SQL tab not working in V2.1 EA1 for non-DBA users -- how to fix?
In v2.1 EA 1 the tab to show the SQL script (DDL) in the object browser is not working for non-DBA users. In the prior version, these users would see a message about DBMS_METADATA and then the message would indicate that an "internal generator" would be used to generate the DDL script. After that brief message the DDL would show up as expected. This doesn't seem to be the case in the newest version.
I issued the following two grants to a particular user which worked, but I am reluctant to issue the grants to "PUBLIC".
SQL> grant execute on DBMS_METADATA to XXXXX;
SQL> grant select_catalog_role to XXXXX;
So, my questions are:
1) Will the old functionality (that didn't require these privileges) be added to V2 at some point?
2) What security implications are there for issueing the above grants to PUBLIC?
NOTE: After granting execute on the DBMS_METADATA package, it still didn't work. I left that grant in place and granted SELECT_CATAOG_ROLE, so I can't say for sure that the 1st grant was required.
Edited by: user615070 on Nov 19, 2009 9:30 AM
Edited by: user615070 on Nov 19, 2009 10:06 AMAn OEM account is separate from the database account. You need to use OEM UI to create an OEM account, however, for certain tasks to be done in the databases which OEM is monitoring they will also require separate database accounts within those databases. For example, to view the performance tab in OEM UI, a database account is required.
OEM only has two types of users, i.e. Super Administrator and Administrator, but don't go by the names. You can grant an OEM 'Administrator' account access to specific targets and what they can do within OEM, such as only viewing reports, targets, and so on. For access within a database, the user created need not be a DBA either.
I hope you understand. -
Sql functions in Pl/Sql region not working
Hi all,
I have created a pl/sql region like this
This is the example taken from denes kubicek
DECLARE
v_counter INTEGER := 0;
v_line VARCHAR2 (4000);
v_rec_in_row INTEGER := 6;
BEGIN
HTP.prn ('<table>');
HTP.prn ('<tr>');
HTP.prn ('<td>');
FOR c IN
(SELECT CASE
WHEN LOWER(SUBSTR(SUBSTR(NAME,INSTR(NAME,'/')+1), -3, 3)) = 'doc'
THEN '<table>'
|| '<tr><td><img src="#WORKSPACE_IMAGES#user_green_locked.gif"/></td></tr>'
|| '<tr><td style="text-align:center">'
|| SUBSTR(NAME,INSTR(NAME,'/')+1) name
|| '</td></tr></table>'
WHEN LOWER(SUBSTR(SUBSTR(NAME,INSTR(NAME,'/')+1), -3, 3)) = 'xls'
THEN '<table>'
|| '<tr><td><img src="#WORKSPACE_IMAGES#user_yellow.gif"/></td></tr>'
|| '<tr><td style="text-align:center">'
|| SUBSTR(NAME,INSTR(NAME,'/')+1) name
|| '</td></tr></table>'
WHEN LOWER(SUBSTR(SUBSTR(NAME,INSTR(NAME,'/')+1), -3, 3)) = 'ppt'
THEN '<table>'
|| '<tr><td><img src="#WORKSPACE_IMAGES#user_yellow.gif"/></td></tr>'
|| '<tr><td style="text-align:center">'
|| SUBSTR(NAME,INSTR(NAME,'/')+1) name
|| '</td></tr></table>'
WHEN LOWER(SUBSTR(SUBSTR(NAME,INSTR(NAME,'/')+1), -3, 3)) = 'txt'
THEN '<table>'
|| '<tr><td><img src="#WORKSPACE_IMAGES#user_yellow.gif"/></td></tr>'
|| '<tr><td style="text-align:center">'
|| SUBSTR(NAME,INSTR(NAME,'/')+1) name
|| '</td></tr></table>'
WHEN LOWER(SUBSTR(SUBSTR(NAME,INSTR(NAME,'/')+1), -3, 3)) = 'gif'
THEN '<table>'
|| '<tr><td><img src="#WORKSPACE_IMAGES#user_yellow.gif"/></td></tr>'
|| '<tr><td style="text-align:center">'
|| SUBSTR(NAME,INSTR(NAME,'/')+1) name
|| '</td></tr></table>'
ELSE '<table>'
|| '<tr><td><img src="#WORKSPACE_IMAGES#user_red.gif"/></td></tr>'
|| '<tr><td style="text-align:center">'
|| SUBSTR(NAME,INSTR(NAME,'/')+1) name
|| '</td></tr></table>'
END doc
FROM con_doc_info)
LOOP
v_line := v_line || c.doc || '</td><td>';
v_counter := v_counter + 1;
IF v_counter = v_rec_in_row
THEN
HTP.prn (v_line);
HTP.prn ('</td></tr><tr><td>');
v_line := NULL;
v_counter := 0;
END IF;
END LOOP;
HTP.prn (v_line);
HTP.prn ('</td></tr></table>');
END;but the functions are not working?
Any idea ? Please help meHi fac
Database version is 10g
This sample code is working
DECLARE
v_counter INTEGER := 0;
v_line VARCHAR2 (4000);
v_rec_in_row INTEGER := 6;
BEGIN
HTP.prn ('<table>');
HTP.prn ('<tr>');
HTP.prn ('<td>');
FOR c IN
(SELECT CASE
WHEN deptno = 20
THEN '<table>'
|| '<tr><td><img src="#WORKSPACE_IMAGES#user_green_locked.gif"/></td></tr>'
|| '<tr><td style="text-align:center">'
|| ename
|| '</td></tr></table>'
WHEN deptno = 30
THEN '<table>'
|| '<tr><td><img src="#WORKSPACE_IMAGES#user_yellow.gif"/></td></tr>'
|| '<tr><td style="text-align:center">'
|| ename
|| '</td></tr></table>'
ELSE '<table>'
|| '<tr><td><img src="#WORKSPACE_IMAGES#user_red.gif"/></td></tr>'
|| '<tr><td style="text-align:center">'
|| ename
|| '</td></tr></table>'
END emp
FROM emp)
LOOP
v_line := v_line || c.emp || '</td><td>';
v_counter := v_counter + 1;
IF v_counter = v_rec_in_row
THEN
HTP.prn (v_line);
HTP.prn ('</td></tr><tr><td>');
v_line := NULL;
v_counter := 0;
END IF;
END LOOP;
HTP.prn (v_line);
HTP.prn ('</td></tr></table>');
END;This code is working good images are displayed as per the deptno.
I need to display images for the documents which i have uploaded and stored in a file
I am taking the name and in that last three letters alone and according to that pictures should appear
My previous code while running no output is there.
Hope I am more clear now
bye
Srikavi
Maybe you are looking for
-
I have a 2009 MAC PRO 10.6.8. Had never had any problems. Tried installing Mountain Lion today. Was told, " Mountain Lion could not be installed because Hard Disk is broken"! Is it because HD is broken or perhaps incompatible? Has any one else had th
-
links and search bars on the top half of pages dont work and its not that i click them and they dont work but it wont let me click them its like it doesnt see them
-
ELM send SOAP distributor - SSLCertificateException: certificate rejected
Hi, I try to configure the Swiss income tax scenario ELM via our PI 7.11. The sending step produces the failure: SOAP: call failed: iaik.security.ssl.SSLCertificateException: Peer certificate rejected by ChainVeri-fier Usually I have to install the c
-
Is there a Usb Optical audio adapter for 2012 iMac?
I didn't realize that there wasn't going to be an optical audio output until the day I unboxed the iMac. I would like to plug it into my headphones that require a optical ouput. Any help well be appericated, thanks.
-
Hi everybody, I want to buy a new iPod, but since I only have 10.3.9, I can't get the new iPods(except the shuffle but I'm not getting that 'cause I want a screen). So, I've opted for buying a 5.5 generation iPod video 30GB. The things I want to know