SQL MP 6.5.1.0 Monitoring Replication Publications and Susbscriptions

I am setting SQL replication monitoring and the discoveries are going well. However, the Publications and Subscriptions are showing "Not Monitored". I have enabled every discovery and performance rule I can find. I haven't found any monitors for
either objects. How can I tell when these go bad?
Thanks,
John

You may refer to Cameron Fuler blog
http://blogs.catapultsystems.com/cfuller/archive/2010/11/10/enabling-sql-replication-monitoring-%E2%80%93-what-to-expect-in-the-replication-views-in-opsmgr.aspx
Roger

Similar Messages

How to automate checking status of Replication agent and Replication queue in CQ5

As part of monitoring the status of replication agents and replication queue, is it possible to automate the checking process?
We can check them from GUI, but from a monitoring perspective we are loking for a mechanism where the status can be checked continuously and we are alerted whenever there is some issue.
1. Check status of replication agent (enabled/disabled)
2. Check status of replication queue (if the queue is blocked)
Thanks in advance
nkrao

you can pull the queue from the page the same way the UI gets the list
in the table:
curl -u admin:admin
"http://localhost:4502/etc/replication/agents.author/publish/jcr:content.queue.json?agent=p ublish"
and then use a shell library like ticktick.sh to parse the json
response. A sample of how to get the bundles loaded and installed from
CQ using the ticktick library can be found here
https://github.com/kristopolous/TickTick
http://ruben42.wordpress.com/2012/04/24/using-ticktick-sh-to-parse-json-responses-from-ado be-cq5-5/

Why is it that when I plug my Macbook Pro to an external monitor, the external monitor turns black and shows the mouse only

Why is it that when I plug my Macbook Pro to an external monitor, the external monitor turns black and shows the mouse only

Hi, yes preferences sees there is a second display it recognises what make of monitor it is etc but I just get a blank blue screen on the monitor when I change it to the hdmi setting! I have tried with mirroring on and off, rearranging the displays in the preference window and lots of different resolution settings but with no difference.
An old MacBook connects fine so the monitor and hdmi port must be okay. I'm sure we have used the cable before but it could have been with the previous MacBook Air. The current one I'm using is a mid 2011 version running lion and is (according to software update) all up to date.
Any thoughts or help would be appreciated!

Qosmio G30-126 monitor become black and FN buttons don't work

Hello,
I have small problem, ehm two problems but perhaps small for you :)
Last week I install Vista ultimate WITHOUT RECOVERY CD..
It's OK, but I'm closing cover of notebook and instantly open, monitor become black and i can't anything do beyond restart .
In Control panel in possibilities of power supply , bookmark "options for closing pad" doesn't work.
Maybe it is by, because i don't driver if exist
And second problem maybe related with first but this is mistake by it, because I wasn't discover drivers because i don't hidden toolbar on up on dispay in Windows, where is standartly is.
I don't work major part hidden functions under key FN ( I think FN + F2,F3...F12) plus keys be the side POWER without multimedia keys on music..
Thx for help !!!
Sry for my bad english
Message was edited by: Martiosso

Hi Martin
First of all its interesting if you have downloaded and installed all Toshiba Vista drivers which are released on the Toshiba European driver page?
All drivers must be installed in the right order!
If I'm not mistaken the Qosmio G30-126 belongs to the PQG32E series. It was delivered with HD DVD drive and therefore you should choose the drivers for Qosmio G30 HD DVD (PQG32E)!!!
Please check firstly the Installation Instructions txt file and then install all drivers like mentioned in this document.
Regarding the display issue;
You should install the right NVIDIA driver from the Toshiba page!!
The FN keys and control buttons dont work because the Toshiba Vista Value Added Package was not installed. This package contains different applications which are necessary to get all Toshiba functions running!
Good luck

Since my G5 died I was thinking about getting a Mac Mini, but I have a ViewSonic Monitor (from 2004) and a USB keyboard and mouse - I also have the external drive tha downloaded my files on to. Do you think the monitor, keyboard and mouse will work on it?

Since my G5 died I was thinking about getting a Mac Mini, but I have a ViewSonic Monitor (from 2004) and a USB keyboard and mouse - I also have the external drive that I downloaded my files on to. Do you think the monitor, keyboard and mouse will work on it? Would I have to get a hub so I could use the stuff I already have? Is that viewsonic too old to work on it?
What else would I need? Please advise...

Yes for keyboard and mouse.
The monitor will work if it has an HDMI, VGA ir DVI input. If it only has a VGA input you will need this adopter
http://store.apple.com/us/browse/home/shop_mac/mac_accessories/cables/cable_choo ser#selected-step1=MINI-DISPLAY-PORT&selected-step2=VGA&step=3

Switched video settings on my Mac Mini and now the bloody thing shows "Invalid Format" on my TV (used as monitor for years) and I cannot get it to switch back.

Switched video settings on my Mac Mini and now the bloody thing shows "Invalid Format" on my TV (used as monitor for years) and I cannot get it to switch back.
What can I do to get it to work again as more than an overpriced paperweight?

Hello,
Safe Boot from the HD, (holding Shift key down at bootup), see if you can set a good resolution.

Using external monitor in bios and bootup on 3000 N100

Is it possible to use an external monitor in bios and bootup as my monitor has just died and is now out of warrenty? I am able to use the laptop monitor for about a second each time i open the lid before it turns off. Any help would be much appreciated.

thanks for the quick reply, however it did not work. would the monitor that im using make any difference? (its a sony multiscan g220)

New computer and video monitors for HD and PP CS5.5

Dear All,
I have recently updated to Adobe Creative Suite 5.5 Master Collection to work in conjuntion with Final Cut Pro. I've been working with a Canon XL-1s, taping with mini-dv format in Standard Definition up to this time but am thinking of buying the Panasonic AG-AC160 AVCCAM and upgrading to High Definition.
I'm working on a Mac Pro and have been using a View Sonic computer monitor and a Sony Video Monitor that I've had for years -- left over from the old analog video tape days, but it still seems to do the job well.
I'm learning Premiere Pro CS5.5 and the suite seems to be working o.k., so that is not a problem at this time.
My question is: If I start working in high definition, do I need to change my computer and video monitors in order to get professional results from my editing software? I have done documentaries and want to do them in high def and have the best video for podcasts and mobile applications.
I don't want to spend another gazillion dollars on monitors if I don't have to, but I do want to provide the best video that I can and I will buy what I need.
Thanks for your suggestions and any info you can provide.
Small Town Gal

Dear taz291819
Thanks for your help. I have one more question. Do I actually need two monitors or will the computer monitor serve as a video monitor? I'm used to the old analog process of viewing the final video on a video monitor, but with HD, I would think that the computer monitor would give the same result as a separate video monitor. My ViewSonic would work, I'm sure, but it's a bit small for the HD format and I would like a bigger screen to work on. So, can I just use the computer monitor for editing and viewing the final product?
For Harm Millaard, I just think that HD will produce a better final product in small formats viewed as podcasts or on mobile phones -- plus almost everyone wants everything in HD now, and for some of the things I will be doing, it will undoubtedly give a better product. I want to upgrade my camera anyway, so I want to go to HD.
Small Town Gal

HP 2509b Monitor starts out and goes black.

OP Windows 7 64-bit
My HP 2509b monitor flickered on and off ... I restarted my machine ... the monitor came on, then slowly went black. It does this on my husbands computer also. The spare monitor I have hooked up works great ... but it's not my HP 2509b. I have owned it a little under a year.

bperigo,
This is a very well documented issue of this monitor. Searching the forum yields at least 80 threads containing "2509m".
Please shine a flashlight at the front on the screen at various angles and look a faint image on the screen. If you see an image that corresponds to the output of your computer, your backlight inverter and/or lamps have gone bad.
Concerning the menu options, again shine a flash light at the screen and look for the menu image. If the backlight inverter and/or backlight lamps have gone bad, you will see no image without an external light source because the monitor isn't producing it's own light as it should.
Frank
{------------ Please click the "White Kudos" Thumbs Up to say THANKS for helping.
Please click the "Accept As Solution" on my post, if my assistance has solved your issue. ------------V
This is a user supported forum. I am a volunteer and I don't work for HP.
HP 15t-j100 (on loan from HP)
HP 13 Split x2 (on loan from HP)
HP Slate8 Pro (on loan from HP)
HP a1632x - Windows 7, 4GB RAM, AMD Radeon HD 6450
HP p6130y - Windows 7, 8GB RAM, AMD Radeon HD 6450
HP p6320y - Windows 7, 8GB RAM, NVIDIA GT 240
HP p7-1026 - Windows 7, 6GB RAM, AMD Radeon HD 6450
HP p6787c - Windows 7, 8GB RAM, NVIDIA GT 240

Using ext monitor for timeline and laptop screen as preview?

is it possible that when i connect my external monitor to my macbook pro i can use the external for the timeline and the laptop screen for the previewing?
cheers

I'm trying to do this exact same thing and am coming to the conclusion that it is not possible given my setup. I have a MacBook Pro 2.2 Intel Core 2 Duo with 4GB of RAM and a NIVIDIA GeForce 8600M GT Graphics Card. I'm running FCS 3 and all media is read from a 1TB Seagate 7200 SATA drive read through a SeriTek 2SM2 PCI card in the Express Slot.
You can easily arrange your monitors to do what you're asking (as outlined above), but the problem is the Graphics Card is not powerful enough to run both monitors and you will experience dropped frames with any HD codecs. I've tried XDCAM, DVCPROHD and ProRes 422 -- all dropped frames immediately. In fact, even if I use the "closed clamshell" mode, so the graphics card is powering ONLY the external monitor, I still get the same dropped frames issue. The only way I can edit or play back without dropped frames is by using NO external monitor whatsoever.
Is this a unique problem for me? Is there a solution to this? Would the new 17 inch i5's with a NVIDIA GeForce GT 330M (512MB) be able to power an external monitor?
EDIT: And the External Monitor is a Dell 2408WFP connected through the DVI port.
Message was edited by: Mr. Landers

How to monitor RAC services and nodeapps in Grid Control

Hi,
I have created a number of RAC service names such as GL on a 2-node RAC and would like to use Grid control 10.2.0.2 to monitor the availability of those services and nodeapps. I was not able to find anything in Grid Control that would allow me to configure that. What are being monitored now are the listeners, database instances and nodes. Would it be possible to monitor more than just the RAC listeners, instances and nodes?
thanks.

I don´t think that there is an out-of-the-box metric. However, CRS monitors your services and Grid Control monitors CRS errors. If you need more granular monitoring, I have 2 suggestions:
1) user callouts:
[http://download.oracle.com/docs/cd/B28359_01/rac.111/b28254/hafeats.htm#RACAD7133]
2) extending oracle enterprise manager
I have written a paper on how to extend oem at [http://www.ora-solutions.net/web/papers/]
"Extending Oracle Enterprise Manager to collect HP-UX glance data"
You can follow the instructions to build a new target type called "RAC_SERVICE" and add your serivces as targets, e.g. S_BATCH, S_ONLINE, S_HR.
Best regards,
Martin Decker
www.ora-solutions.net
Edited by: mdecker on Jan 2, 2009 10:57 AM
Edited by: mdecker on Jan 2, 2009 10:59 AM

Monitoring S&D and MM reports

Hi to all,
Can anybody kindly tell me some examples on monitoring S&D and MM reports on daily basis required by clients.
Thanks in advance.
Regards
Monalisa

Hi,
tcode - VA05, used to list open sales order and processing the same
Regards,
Raghavendra

What are replications objects and subscriptions???

Hello All,
I am working with CRM 5.0
I want to know what are replications objects and subscriptions and how it is work with sites and BDocs? The process is not clear to me and how is the relationship between them?
Regards
Jacopo Francois

Hello Jacopo,
The CRM Middleware course material CR500/CR540/CR550 details out the concepts of a Replication Obj,Publication and Subscription.
Let me try and illustrate this concept with a real-world example. This is normally the example I provide whenever I train employees.
What do you do when you want to subscribe for SAP Netweaver magazine published from SAP Press?
1) SAP Press publises a number of SAP magazines. So, first you select the publication of your choice. Your publication = "SAP Netweaver".
2) Next, you have to subscribe for it in the website by furnishing your credit card details, shipping address and the duration of your subscription. So, that becomes your subscription. So, a publication can have many subscriptions (sent by many people)
The replication object is just the abstraction which collects all the publications and their corresponding subcriptions and relates them a particular Bdoc type. Normally, the name of a replication object = Name of the Bdoc type. E.g. BUPA_MAIN. Replication objects can be bulk objects or simple intelligent objects depending on whether mass data or filtered data is desired. Naturally, there will not be any subscriptions for a bulk replication object.
Now, once you have created a site and have done its configuration, you can associate the site to a number of replication objects depending on what type of data would the site be interested in.
Hope you are now able to figure out the meaning of these MW terms and understand the relationship between them.
Please reward with points if this helps!
Thanks,
Sudipta.

Unable to connect hana with sybase replication server and i am not getting ECH plz help

unable to connect hana with sybase replication server and i am not getting ECH plz help

Please don't necrobump/hijack threads: https://wiki.archlinux.org/index.php/Fo … bumping.22
https://wiki.archlinux.org/index.php/Fo … _hijacking
Closing

SQL Server Config Manager, Windows Administration Tools, Manage Computer and Task Manager

I want to cross check the
SQL Server Config Manager, Windows Administration Tools, Manage Computer and Task Manager
for running of SQL SERVER.
I stop SQLEXPRESS instance in one of the above tools but the others become unaware of the latest changes except
Task Manager.
For example when I stop SQL EXPRESS from within SQL Server Congiguration Manager
it still seems working in Windows Administration Tools, Manage Computer windows.
What is the reason for this?

Hi,
Aprat from SQL Server configuration manager all other are windows tool and should not be used to manage SQL Server in anyway. Although I cannot completely understand list of tools you mentioned
Please mark this reply as answer if it solved your issue or vote as helpful if it helped so that other forum members can benefit from it
My Technet Wiki Article
MVP

SQL MP 6.5.1.0 Monitoring Replication Publications and Susbscriptions

Similar Messages

Maybe you are looking for