SQL QUERRy (how to use the SQVI)

Hi all,
can anyone explain the process and how to use the Tcode SQVI.....
thanks in advance
srinivas...

thanks for imm responce....
as per ur mail ...
If a report got created through SQVI Transaction it will not allows you to transport..
the same senario will effect to the Tcodes SQ01,SQ02,SQ03.....
could you please look into below my question also..can any one please responce to this,,,,
The below link will explain to genereate the normal or ALV report using ABAP query without any programming language.i have few questions......
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/40bec8da-4cd8-2910-27a9-81f5ce10676c
1.here in this link pdf doc explained how to get the data in two tables usuing ABAP quesry,,,
is it possible for getting the data from more than two tables and how ,canone please guide me....
2.using ABAP query i got the ALV single grid report ,is it possible to get more than single grid usuingABAP query ....?
3.using ABAP query i got the ALV single grid report then how to give the print and how copy and paste in the edit pad....
note : the above PDF link step by step is helpfull for generating report using Tcodes like SQ01,SQ02,SQ03.
can anyone provide the similar type pdf documents for generating report using Tcode SQVI...?
thanks in advance
Srinivas...........

Similar Messages

How to use the SQVI in HR-ABAP

Dear Guru,
How to use Quick Viewer in HR ABAP,
kindly give some sample materials for this .
else provide some soluytion for this .
Regards,
Mathankumar.A

I don't think there is any difference when comes to HR ABAP. so you can proceed the way you do incase of normal tables. the only difference here is you will see Infotypes instead of Tables.

How to use the item of table(ms access) in pl/sql

I want to use oracle forms builer developer application with ms access database
I don't know how to use the item of table in the pl/sql;please help me !

MERGE INTO EmpDept Target
Using (SELECT E.Address,
e.Design,
e.EmailId,
e.EmpId,
e.Ename,
e.ManagerId,
e.Salary,
D.DeptId,
D.DeptName,
D.Location
FROM Employee E
INNER JOIN Dept D
ON E.DeptId = D.DeptId) AS Source (Address, Design, EmailId, EmpId, EName, ManagerId, Salary, DeptId, DeptName, Location)
ON Source.EmpId = Target.EmpId
WHEN NOT matched THEN
INSERT (Address,
Design,
EmailId,
EmpId,
Ename,
ManagerId,
Salary,
DeptId,
DeptName,
Location)
VALUES (Address,
Design,
EmailId,
EmpId,
EName,
ManagerId,
Salary,
DeptId,
DeptName,
Location)
WHEN matched THEN
UPDATE SET Address = Source.Address,
Design = Source.Design,
EmailId = Source.EmailId,
Ename = Source.Ename,
ManagerId = Source.ManagerId,
Salary = Source.Salary,
DeptId = Source.DeptId,
DeptName = Source.DeptName,
Location = Source.Location;

Where we use the window class in the sql and how to use it

where we use the window class in the sql and how to use it

http://docs.oracle.com/cd/E11882_01/server.112/e26088/functions004.htm#SQLRF06174
Regards
Etbin

How to use the Calculated attibute in view object

Hi,
I have a view object query with the calculated attribute name as 'TRANCODE' in the below sql.This query works for the initial page loading.
After the page gets loaded, there is a search section in the same page at the top.
Here i will have to build the whereclause to the same query and retrieve the values.
i am using jDeveloper 10.1.3.1, with adf and jHeadstart.
Can some one tell as how to use the calculated attribute TRANCODE in whereclause?
SELECT /*+ first_rows(10) */
BatchCntl.FILE_CNTL_ID,
CASE WHEN chk_bit(Entry.ENTRY_FLAGS, 2)='Y' OR Entry.ENTRY_SUBSTATUS = 'D' OR Entry.ENTRY_SUBSTATUS = 'J'
THEN
CASE eeh.TRAN_CODE
WHEN '21' THEN 'C'
WHEN '22' THEN 'C'
WHEN '31' THEN 'C'
WHEN '32' THEN 'C'
WHEN '26' THEN 'D'
WHEN '27' THEN 'D'
WHEN '36' THEN 'D'
WHEN '37' THEN 'D'
ELSE eeh.TRAN_CODE
END
ELSE
CASE Entry.TRAN_CODE
WHEN '21' THEN 'C'
WHEN '22' THEN 'C'
WHEN '31' THEN 'C'
WHEN '32' THEN 'C'
WHEN '26' THEN 'D'
WHEN '27' THEN 'D'
WHEN '36' THEN 'D'
WHEN '37' THEN 'D'
ELSE Entry.TRAN_CODE
END
END AS TRANCODE,
FROM Batch_Cntl BatchCntl, Entry, ENTRY_EDIT_HIST eeh
WHERE (BatchCntl.BATCH_TYPE = 'E')
AND (BatchCntl.BATCH_STATUS in ('A','D','R','P'))
AND entry.in_batch_cntl_id = BatchCntl.BATCH_CNTL_ID
and Entry.fi_rt = eeh.fi_rt (+)
and Entry.entry_id = eeh.entry_id (+)
AND (Entry.ENTRY_STATUS in ('A','D','R','P'))
ORDER BY BatchCntl.BATCH_CNTL_ID, Entry.entry_id
regards
Raj.

Let's say your application module is com.yourcompany.someapp.services.MyService, and let's say you authored a method like the following in the MyServiceImpl.java file:
public void doSomething(int i, String s) {
}and you exposed this AM custom method using the AM editor.
BC4J design time will automatically create you the com.yourcompany.someapp.services.common.MyService interface that will look like this if you go look at the source code:
package com.yourcompany.someapp.services.common;
import oracle.jbo.ApplicationModule;
public interface MyService extends ApplicationModule {
public void doSomething(int i, String s);
}To use your custom method from a client, just cast your ApplicationModule to your custom interface like this:
import com.yourcompany.someapp.services.common.MyService;
MyService mySvc = (MyService)yourAM;
mySvc.doSomething(1,"foo");

How to use the updated value in the same update statement

Hello,
I just wonder how to use the updated new value of other column in the same udpate statement. I am using Oracle 11.2, and want to update the two columns with one update statement as following:
create table tb_test (id number(5), tot number(5), mon_tot number(5));
update tb_test set (tot = 15, mon_tot = tot *15) where id = 1;
...I would like to update both tot and mon_tot column, the value of mon_tot shall be determinted by the new value of tot.
Thanks,
Edited by: 939569 on 1-Feb-2013 7:00 AM

Edit: example added
SQL> create table tb_test
2 ( id number(5)
3 , tot number(5)
4 , mon_tot number generated always as (tot*15) virtual
5 );
Table created.
SQL> insert into tb_test (id, tot) values (1, 5);
1 row created.
SQL> select * from tb_test;
        ID        TOT    MON_TOT
         1          5         75
1 row selected.
SQL> update tb_test
2 set    tot = 15
3 where id = 1;
1 row updated.
SQL> select * from tb_test;
        ID        TOT    MON_TOT
         1         15        225
1 row selected.

HOW TO: Use the XML parser in Oracle 8.1.7

I am trying to figure out how to use the xml parser provided in oracle 8.1.7. all i want to do is parse a xml report that is defined using a schema, and place the data into the proper tables. i am totally unfamiliar with the xml parser and how it works. i have done some reading on the subject, but seem to be getting some conflicting infromation about which utilites i need and how to invoke them. can someone please tell me what utilities i need, how to invoke them, and what i need to do to get a xml document to parse and insert to a table? I would greatly appreciate any help anybody could offer. thanks.

You can parse the XML Document with XML Parser and place the data into database using XSU(XML SQL Utility).
Both of these are included in XDK for Java at:
http://otn.oracle.com/tech/xml/xdk_java
The following document could also help:
Oracle9i XML Developer's Guide--XDK [PDF] at http://otn.oracle.com/tech/xml/doc.html

How to use the prompted value in the filter expression

Hi
Is it possible to use the prompted value in the filter expression?
My requirement is that user will be prompted for a date field and I need to filter the records such that the records are displayed for the last 5 weeks from the date entered by the user.
If somehow I know how to use the prompted value in the filter expression then this requirement is easy to be done. If this is possible, please guide me?
If there are other ways to acheive the desired results then please suggest.
Thanks
-Jaz

Edit: example added
SQL> create table tb_test
2 ( id number(5)
3 , tot number(5)
4 , mon_tot number generated always as (tot*15) virtual
5 );
Table created.
SQL> insert into tb_test (id, tot) values (1, 5);
1 row created.
SQL> select * from tb_test;
        ID        TOT    MON_TOT
         1          5         75
1 row selected.
SQL> update tb_test
2 set    tot = 15
3 where id = 1;
1 row updated.
SQL> select * from tb_test;
        ID        TOT    MON_TOT
         1         15        225
1 row selected.

How to use the out parameter of a transformation

Hi All,
I have a requirement where I need to move all the transformations from process flows to map.SO for each transformation I need to have 1 map which calls this transformation.I have 1 transformation which has both input and output parameter.If I use this transformation in mapping then how to use the out parameter of thsi transformation.This out parameter needs to beused in other mappings.Can soemone please help me.
Thansk in advance

Hi,
I'm not quite sure what you are trying to do.
What works: Connect the outgroup of a pre- or post-mapping process operator to the mapping output parameter operator..
What does not work: Connect the outgroup of an operator that can return more than one row (e.g. table operator, filter, joiner ,...) to the mapping output parameter operator. The mapping output parameter just returns "one row", like a pl/sql function call.
You cannot pass a "data stream" from one mapping to another. Maybe the pluggable mappings is what you are looking for.
Regards,
Carsten.

How to use the repository; uploading reports from DEV to PROD...

Hello...
I'm fairly new to CR-XIr2 (SP3) but have worked with Crystal Reports since v6.0. I'm trying to figure out how to create a dynamic parameter list that someone can select an item from, which will get sent as an input parameter to the SQL Server 2005 stored proc that populates the report. I'm also trying to figure out if there's an easy way to copy reports from a DEV environment into PROD. We have BOE.
Basically, I would like to find out resources online or in books on how to use the BOE repository for dynamic and/or cascading parameters (i.e. pulling a list of text values & their associated IDs from a lookup table that won't be used in the report), images (i.e. corporate logo), etc.. What complicates things for us is that IT is now requiring us to use a DEV environmentit was really easy when we had unlimited access in PROD! We also need to put together a process where reports & other repository objects that are copied from DEV to PROD access the correct db, etc. (Crystal Report in DEV accesses DEV db/repository/etc.when copied to PROD it accesses PROD db/repository/etc.)
Anyway, I'm just looking for info on where to begin--whether it be a book, a BO/SAP knowledge base article, in-class training from a specific company, etc. Thanks!

Hey Markian,
Can you let me know the process you have followed to migrate from Dev to Prod.
We can migrate all the reports and objects and database fields through migrate wizard where you can import all the objects, reports and database fields and users to production enterprise.
Just follow the above scenario and let us know if you are facing any error.
Try publish the reports using import wizard and run it in the crystal designer.
Regards,
Naveen.

How we use the rights on LOV

Hi,
How we use the rights on LOV to filter.

What you need to do is to edit the LOV sql (assuming it is custom folder) and insert there some
kind of security mechanism.
Also you can create dependencies in the parameters so that if you will select on the "Region" parameter the value of "New York" when opening the values for "Departments" you will get only the relevant departments.
This can be done in the parameters definition, you can choose there to limit the results according to another condition. (note that it might create some performance issues)
Tamir

How to use the same POWL query for multiple users

Hello,
I have defined a POWL query which executes properly. But if I map the same POWL query to 2 portal users and the 2 portal users try to access the same page simultaneously then it gives an error message to one of the users that
"Query 'ABC' is already open in another session."
where 'ABC' is the query name.
Can you please tell me how to use the same POWL query for multiple users ?
A fast reply would be highly appreciated.
Thanks and Regards,
Sandhya

Batch processing usually involves using actions you have recorded. In Action you can insert Path that can be used during processing documents. Path have some size so you may want to only process document that have the same size. Look in the Actions Palette fly-out menu for insert path. It inserts|records the current document work path into the action being worked on and when the action is played it inserts the path into the document as the current work path..

Okay so I set up my Time Capsule already and is now backing up 2 of my iMacs. Works great. What I want to know is how to use the TC to directly store files? I want to do this to delete some files but still have them on the TC for future reference..

Okay so I set up my Time Capsule already and is now backing up 2 of my iMacs. Works great. What I want to know is how to use the TC to directly store files? I want to do this to delete some files on iMac 20inch but still have them on the TC for future reference..eg some movies on iTunes. I want to directly save them on the drive so I can delete them from iTunes and gain some storage. (Ps on iMac 20 inch (it's almost full - 320 GB) when I enter time machine, a tab comes up on finder which reads "Time Machine backups" it's able to be ejected like a disc or a connected device. On the iMac 20 inch, I dragged some files onto there as if using it like a hard drive. Is this the correct method? Then I went to my 27inch iMac and saw the "Time Machine Backups" hoping to see the files I dragged from the 20inch iMac. But the files were not there except a folder that said "Backups.backupdb". Can someone help me?

It's not a good idea to use a network disk for both Time Machine backups and other things. By design Time Machine will eventually consume all the space on its output disk, which will then cause problem for your other files. I'd store those other files on an external disk connected to the Time Capsule. The problem with that is that Time Machine will only back up files that are local to your Mac. That means that you'll only have one copy of the files on or attached to your Time Capsule.
By the way, you've been misled by poor field labeling on this forum into typing a large part of your message into the field intended for the subject. In the future just type a short summary of your post into that field and type the whole message into the field below that.

JNI - How to use the error reporting mechanism?

I've developed a C++ DLL which is loaded from a commercial Win32 application (not written by me) as a plug-in for external calculations. On its initialization the C++ DLL launches the Java VM via the JNI invocation interface. When the DLL functions are called by the application, they forward the calls to Java objects inside the Java VM, again via JNI invocation interface.
This works well, but I have encountered a weird error.
From Java I open a JFrame containing a JTextArea as small console for debug output messages. If I turn output to this debug console off (my printToConsole routine checks whether a boolean flag is set), the string concatenation operator may lead to a crash of the Java VM.
For example, if in one of the Java functions called from the
DLL via JNI invocation interface the following is the first statement,
it leads to a crash of the Java VM and the application that loaded the C++ proxy DLL.
String test=""+Math.random(); // String test not used later
Interestingly, if I comment this statement out, the Java code works fine WITHOUT any crash. I've already thought about potential races and synchronization issues in my code, but I don't see where this is the case. And the string concatenation error fails as well, if I insert sleep() statements in front of it and at other places in the code. However, if I turn on log messages printed to my JFrame debug console (containing a JTextArea), the String concatenation works without problems.
So maybe the JNI interface has a bug and affects the Java VM; I don't see where my JNI code is wrong.
One problem is that I do not get any stdout output, as the C++ proxy DLL is loaded by the Windows application, even if I start the Windows application from the DOS command line (under Windows).
Does anyone know how to use the error reporting mechanism?
http://java.sun.com/j2se/1.4.2/docs/guide/vm/error-handling.html
Is it possible that the JVM, when it crashes, writes debug information about the crash into a file instead of stdout/stderr?
My C++ proxy DLL was compiled in debug mode, but the commercial application (which loaded the DLL) is very likely not.
I do not know hot to find the reason why the String concatenation fails inside the Java function called from the C++ DLL via JNI.

Yes, I've initially thought about errors in the C++ code too. But the C++ code is actually very simple and short. It doesn't allocate anything on the C++ side. It allocates a couple of ByteBuffers inside the Java VM however via JNI invocation interface calls of env->NewDirectByteBuffer(). The native memory regions accessed via the ByteBuffers are allocated not by my own C++ code, but by the program that calls my DLL (the program is Metastock).
The interesting thing is that everything works fine if output to my debug console is enabled, which means that in the Java print routine getConsoleLoggingState() returns true and text is appended to the jTextArea.
static synchronized void print(String str)
{ MetaStockMonitor mMon=getInstance();
if ( mMon.getFileLoggingState() && mMon.logFileWriter!=null) {
mMon.logFileWriter.print(str);
mMon.logFileWriter.flush();
if ( mMon.getConsoleLoggingState() ) {
mMon.jTextArea1.append(str);
Only if output to the JTextArea is turned off (ie. getConsoleLoggingState()==false), the crash happens when the FIRST statement in the Java routine called via JNI invocation interface is a (useless) String concatenation operation, as described above.
String test=""+Math.random(); // String test not used later
Moreover, the crash happens BEFORE the allocated ByteBuffer objects are accessed in the Java code. But again, if console output is turned on, it works stable. If console output is turned off, it works when the (useless) String concatenation operation is removed in the Java routine called from C++.
I've already thought about potential races (regarding multiple threads), but this can be ruled out in my case. It almost appears as if the JVM can have problems when called by the invocation interface (I tested it with Java 1.4.2 b28).
All the calls between C++ and Java go ALWAYS in the direction from C++ code to Java. Unfortunately, there is no special JRE version with extensive logging capabilities to facilitate debugging. And the problem is not easily reproducible either.
JNIEnv* JNI_GetEnv()
JNIEnv *env;
cached_jvm->AttachCurrentThread((void**)&env,NULL);
fprintf(logfile,"env=%i\n",env);
fflush(logfile);
return env;
// function called by Metastock's MSX plug-in interface
BOOL __stdcall createIndEngine (const MSXDataRec *a_psDataRec,
const MSXDataInfoRecArgsArray *a_psDataInfoArgs,
const MSXNumericArgsArray *a_psNumericArgs,
const MSXStringArgsArray *a_psStringArgs,
const MSXCustomArgsArray *a_psCustomArgs,
MSXResultRec *a_psResultRec)
a_psResultRec->psResultArray->iFirstValid=0;
a_psResultRec->psResultArray->iLastValid=-1;
jthrowable ex;
jmethodID mid;
JNIEnv* env=JNI_GetEnv();
jobject chart=getChart(env, a_psDataRec);
if ( chart==NULL) {
return MSX_ERROR;
jobject getChart (JNIEnv* env, const MSXDataRec *a_psDataRec)
jthrowable ex;
jmethodID mid;
int closeFirstValid, closeLastValid;
closeFirstValid=a_psDataRec->sClose.iFirstValid;
closeLastValid=a_psDataRec->sClose.iLastValid;
long firstDate, firstTime;
if (closeFirstValid>=1 && closeFirstValid<=closeLastValid) {
firstDate = a_psDataRec->psDate[closeFirstValid].lDate;
firstTime = a_psDataRec->psDate[closeFirstValid].lTime;
} else {
firstDate=0;
firstTime=0;
jclass chartFactoryClass = env->FindClass("wschwendt/metastock/msx/ChartFactory");
if (ex= env->ExceptionOccurred() ) {
env->ExceptionDescribe();
env->ExceptionClear();
sprintf(sbuf, "DLL: Cannot find class ChartFactory\n");
printSBufViaJava(sbuf);
return NULL;
mid = env->GetStaticMethodID(chartFactoryClass, "getInstance", "()Lwschwendt/metastock/msx/ChartFactory;");
if (ex= env->ExceptionOccurred() ) {
env->ExceptionDescribe();
env->ExceptionClear();
sprintf(sbuf, "DLL: Cannot find method ID for ChartFactory.getInstance()\n");
printSBufViaJava(sbuf);
return NULL;
jobject chartFactory=env->CallStaticObjectMethod(chartFactoryClass, mid);
if (ex= env->ExceptionOccurred() ) {
env->ExceptionDescribe();
env->ExceptionClear();
sprintf(sbuf, "DLL: Exception while calling ChartFactory.getInstance()");
printSBufViaJava(sbuf);
return NULL;
mid = env->GetMethodID(chartFactoryClass, "getChartID", "(Ljava/nio/ByteBuffer;Ljava/nio/ByteBuffer;Ljava/nio/ByteBuffer;Ljava/nio/ByteBuffer;IIIIIII)F");
if (ex= env->ExceptionOccurred() ) {
env->ExceptionDescribe();
env->ExceptionClear();
sprintf(sbuf, "DLL: Cannot find method ID for ChartFactory.getChartID()\n");
printSBufViaJava(sbuf);
return NULL;
jobject symbolBuf=env->NewDirectByteBuffer(a_psDataRec->pszSymbol, strlen(a_psDataRec->pszSymbol) );
if (ex= env->ExceptionOccurred() ) {
env->ExceptionDescribe();
env->ExceptionClear();
sprintf(sbuf, "DLL: Cannot allocate symbolBuf\n");
printSBufViaJava(sbuf);
return NULL;
jobject securityNameBuf=env->NewDirectByteBuffer(a_psDataRec->pszSecurityName, strlen(a_psDataRec->pszSecurityName) );
if (ex= env->ExceptionOccurred() ) {
env->ExceptionDescribe();
env->ExceptionClear();
sprintf(sbuf, "DLL: Cannot allocate securityNameBuf\n");
printSBufViaJava(sbuf);
return NULL;
jobject securityPathBuf=env->NewDirectByteBuffer(a_psDataRec->pszSecurityPath, strlen(a_psDataRec->pszSecurityPath) );
if (ex= env->ExceptionOccurred() ) {
env->ExceptionDescribe();
env->ExceptionClear();
sprintf(sbuf, "DLL: Cannot allocate securityPathBuf\n");
printSBufViaJava(sbuf);
return NULL;
jobject securityOnlineSourceBuf=env->NewDirectByteBuffer(a_psDataRec->pszOnlineSource, strlen(a_psDataRec->pszOnlineSource) );
if (ex= env->ExceptionOccurred() ) {
env->ExceptionDescribe();
env->ExceptionClear();
sprintf(sbuf, "DLL: Cannot allocate onlineSourceBuf\n");
printSBufViaJava(sbuf);
return NULL;
// Java Function call leads to crash, if console output is turned off and
// the first statement in the Java routine is a (useless) string concatenation.
// Otherwise it works stable.
jfloat chartID=env->CallFloatMethod(chartFactory, mid, securityNameBuf, symbolBuf,
securityPathBuf, securityOnlineSourceBuf, (jint)(a_psDataRec->iPeriod),
(jint)(a_psDataRec->iInterval), (jint)(a_psDataRec->iStartTime),
(jint)(a_psDataRec->iEndTime), (jint)(a_psDataRec->iSymbolType),
(jint)firstDate, (jint)firstTime );
if (ex= env->ExceptionOccurred() ) {
env->ExceptionDescribe();
env->ExceptionClear();
sprintf(sbuf, "DLL: Exception while calling ChartFactory.getChartID()");
printSBufViaJava(sbuf);
return NULL;

How to use the t-code vf31 tor taking print out of invoice

Hi,
How to use the t-code vf31 for taking print out,am getting an error like no message for initial processing exist,
venu

Hi,
Please find the steps
Output type                     RD00
Transmission medium             1
Sort order                      01
Processing mode                 1
Please give the oppropriate fields,
if the still error persists check the configuration in NACE transaction code.
thanks
Kuntla

SQL QUERRy (how to use the SQVI)

Similar Messages

Maybe you are looking for