SQL Query for SSRS has data but fields don't show that data

I am having a strange issue here with my new report;
First off, this report is an availability report for employees. If they are busy then a 0 should be displayed for that Hour and if they are free then a 1 is to be displayed. There are 2 parameters setup for use in this query, one is a Date/Time parameter
and the other is a Text parameter where another Dataset Query is grabbing the data for (Departments)
I have 2 Parameters, 1 is for a Department and the other is to select the date.
                       Hour1     Hour2    Hour3     Hour4    Hour5
Hour6    Hour7
Smith, John     |     1     |     0     |     0     |     0     |
1     |     1     |     1     |
Som, One        |     1    |     1     |     1     |     0
    |    0     |     1     |     1     |
When I run the query in the Query Designer for the Dataset the information is displayed correctly and as I would expect it, however, when I run the Report and choose the same information for the 2 parameters then the report only ever shows all 1's;
Smith, John     |     1     |     1     |     1     |     1     |
1     |     1     |     1     |
Som, One        |     1    |     1     |     1     |     1
|    1     |     1     |     1     |
I've tried searching but didn't know what term to use that describes what is going on.
Like I said, this works if ran in SSMS and works when ran in the Query Builder of SSRS but when it comes to displaying the data on the report the incorrect information is displayed.
Any help would be appreciated.
EDIT
I have also ran the Report Table Wizard with the same query and chosen Names as the row and Hours as the columns and the same thing happens - just all 1's are displayed even thought the query in Query Builder shows correct information.

The difference running the query directly in query designer and when the report runs is that you manually type in values for the parameters when running query designer. It is likely that the parameter values from the report have a different syntax than you
expect. This will happen especially when setting the available values of a parameter from a data cube query. A value from an analysis cube may be displayed in the query designer as "\Project\Iteration Node" while the actual value is "[Work Item].[Iteration
Hierarchy].[Iteration2].&[-7189901615194941888]&[-8272609059741292246]". Very different as you can see. This example is from the TFS analysis server.
The best way to validate that your parameters are passing the values (and syntax) you expect is to add text boxes to your report for each parameter and set them to display Parameters!ParameterName.Value.
"You will find a fortune, though it will not be the one you seek." -
Blind Seer, O Brother Where Art Thou
Please Mark posts as answers or helpful so that others may find the fortune they seek.

Similar Messages

SQL query to list the "Administrative category" field for all applications

yesterday i started a thread to list the "Optional reference" field for all cm applications in a SSRS report. I've got the query with the help of Torsten.
https://social.technet.microsoft.com/Forums/en-US/00419e6e-e3c2-4b80-b6af-2a24ced1032d/sql-query-to-list-the-optional-reference-field-of-all-packages-in-cm-2012?forum=configmanagersdk
But again today, i'm looking for a way to get "Administrative category" field in a SSRS report. Could someone point me to the right direction ?
Kindly mark as answer/Vote as helpful if a reply from anybody helped you in this forum. Delphin

Hi,
You could monitor the SMSProv.log when you check the category of an application. It shows that SQL query the SCCM provider used is related to function fn_ListCategoryInstances.
Best Regards,
Joyce

Write a query for which has its field name as input parameter

Hi All,
I need to write a query for SSRS report. StartDate, EndDate and ChangedField are the input parameters.
Let's consider that we are taking employee details. The table contains lot of fields like emp name,add1,add2,city,state,country,designation,rank etc. We have almost 30 fields are there. These field name are coming as input parameter "ChangedField"
. I need to show the records which belong to the start date and end date also data change for the field which is given in the input parameter "ChangedField". That meand If I give ChangedField="city", we need to check for data which
has been updated with new City name in the given time period.
Please suggest.
Regards,
Julie

Hi Julie,
Per my understanding that you have many fields in the table to be displayed in the report, some of the fields will always show and others should be hide and show based on the selection of the parameters which include the columns names, right?
By default, we can't display columns dynamically in the report automatically without insert this column in the report before. So, in your scenario, I will suggest you to add all the columns in the reports first and then add show/hide expression on
the column visibility based on the selection of the parameter "ChangedField", when some of the fields selectted they will be display, otherwise they will be hidden. For the fields which you want to be always displayed will not need to add the expression
in the column visibility.
Details steps about how to acheive this, please referencet to the article below:
Displaying Dynamic Columns in SSRS Report
If you still have any problem, please feel free to ask.
Regards,
Vicky Liu
Vicky Liu
TechNet Community Support

Convert SQL Query in SSRS

Can anyoone help me out to convert this SQL query in SSRS.
create table tickets_every_hour_ict(ddate datetime,dgroup varchar(50))
Insert into tickets_every_hour_ict
Select
--incident.actie,
incident.dataanmk ,
incident.ref_operatorgroup
/*,incident.ref_status as "Status",
incident.datumaangemeld as "Datum aanmelding" */
From incident
WHERE incident.dataanmk >= DATEADD(day,-7, GETDATE())
AND incident.ref_operatorgroup in ('Automatisering')
order by incident.dataanmk desc
Select ddate1,[00:00],[01:00],[02:00],[03:00],[04:00],[05:00],[06:00],[07:00],[08:00],[09:00],[10:00],[11:00],[12:00],
[13:00],[14:00],[15:00],[16:00],[17:00],[18:00],[19:00],[20:00],[21:00],[22:00],[23:00]
From
Select dgroup 'dgroup',cast(Convert(varchar(10),ddate,101)+' '+ convert(varchar(3),ddate,108) +'00' as date) ddate1,convert(varchar(3),ddate,108) +'00' dtime From tickets_every_hour_ict
)p
PIVOT
Count(dgroup) for dtime in([00:00],[01:00],[02:00],[03:00],[04:00],[05:00],[06:00],[07:00],[08:00],[09:00],[10:00],[11:00],[12:00],
[13:00],[14:00],[15:00],[16:00],[17:00],[18:00],[19:00],[20:00],[21:00],[22:00],[23:00])
)PVT

In SSRS you just need to use matrix container and use query as below
Select dgroup 'dgroup',cast(Convert(varchar(10),ddate,101)+' '+ convert(varchar(3),ddate,108) +'00' as date) ddate1,convert(varchar(3),ddate,108) +'00' dtime From tickets_every_hour_ict
Then in report add dtime column inside column group of matrix and add
=Count(Fields!dgroup.value)
as expression inside data area.
add
ddate1 to row group and you'll get pivoted values
Please Mark This As Answer if it helps to solve the issue Visakh ---------------------------- http://visakhm.blogspot.com/ https://www.facebook.com/VmBlogs
I created it your way but then it will not show the tables with 0. I want it to show all hours even if the count is 0.

Problem writing a sql query for a select list based on a static LOV

Hi,
I have the following table...
VALIDATIONS
ID          Number     (PK)
APP_ID          Number
REQUESTED     Date
APPROVED     Date
VALID_TIL     Date
DEPT_ID          Number     (FK)
I have a search form with the following field item variables...
P11_DEPT_ID (select list based on dynamic LOV from depts table)
P11_VALID (select list based on static Yes/No LOV)
A report on the columns of the Validations table is shown based on the values in the search form. So far, my sql query for the report is...
SELECT v.APP_ID,
v.REQUESTED,
v.APPROVED,
v.VALID_TIL,
d.DEPT
FROM DEPTS d, VALIDATIONS v
WHERE d.DEPT_ID = v.DEPT_ID(+)
AND (d.DEPT_ID = :P11_DEPT_ID OR :P11_DEPT_ID = -1)
This query works so far. My problem is that I don't know how to do a search based on the P11_VALID item - if 'yes' is selected, then the VALID_TIL date is still valid. If 'no' is selected then the VALID_TIL date has passed.
Can anyone help me to extend my query to include this situation?
Thanks.

Hello !
Let's have a look at my example:create table test
id        number
,valid_til date
insert into test values( 1, sysdate-3 );
insert into test values( 2, sysdate-2 );
insert into test values( 3, sysdate-1 );
insert into test values( 4, sysdate );
insert into test values( 5, sysdate+1 );
insert into test values( 6, sysdate+2 );
commit;
select * from test;
def til=yes
select *
from test
where decode(sign(trunc(valid_til)-trunc(sysdate)),1,1,0,1,-1)
       =decode('&til','yes',1,-1);
def til=no
select *
from test
where decode(sign(trunc(valid_til)-trunc(sysdate)),1,1,0,1,-1)
       =decode('&til','yes',1,-1);
drop table test; It's working fine, I've tested it.
The above changes to my first idea I did because of time portion of the DATE datatype in Oracle and therefore the wrong result for today.
For understandings:
1.) TRUNC removes the time part of DATE
2.) The difference of to date-values is the number of days between.
3.) SIGN is the mathematical function and gives -1,0 or +1 according to an negative, zero or positiv argument.
4.) DECODE is like an IF.
Inspect your LOV for the returning values. According to my example they shoul be 'yes' and 'no'. If your values are different, you may have to modify the DECODE.
Good luck,
Heinz

Newbie - help with a SQL query for a bar chart - Originally posted in APEX

I originally posted this in the APEX forum but someone there suggested this is more of a SQL question. Anyone out there who can provide some assistance?
Hi,
I'm a new user on APEX with no real SQL knowledge and I'm trying to build a dashboard with charts into an existing APEX application. Based on another application, I have come up with the following SQL code:
select null link
, CATEGORY label
, count (decode(PROJECT_STATUS,'1',PROJECT_ID))"Active"
, count (decode(PROJECT_STATUS,'2',PROJECT_ID))"Complete"
, count (decode(PROJECT_STATUS,'3',PROJECT_ID))"On Hold"
, count (decode(PROJECT_STATUS,'4',PROJECT_ID))"Pipeline"
, count (decode(PROJECT_STATUS,'5',PROJECT_ID))"Pending Review"
from GRAPO_PROHEADTRK
where (PROJECT_STATUS='1' or PROJECT_STATUS='2' or PROJECT_STATUS='3' or PROJECT_STATUS='4' or PROJECT_STATUS='5' or PROJECT_STATUS='6')
group by CATEGORY
Order by COUNT(PROJECT_ID) DESC
The code from the other app was:
select null link
, FUNCTIONAL_AREA label
, count (decode(PROJECT_STATUS,'Active',PROJECT_ID))"Active"
, count (decode(PROJECT_STATUS,'Complete',PROJECT_ID))"Complete"
, count (decode(PROJECT_STATUS,'On Hold',PROJECT_ID)) "On Hold"
, count (decode(PROJECT_STATUS,'Recurring',PROJECT_ID))"Recurring"
, count (decode(PROJECT_STATUS,'Pipeline',PROJECT_ID))"Pipeline"
, count (decode(PROJECT_STATUS,'Not Approved',PROJECT_ID))"Not Approved"
from PM_V2
where LOB='S2S' and (FUNCTIONAL_AREA='Accounts Payable' or FUNCTIONAL_AREA='Expense' or FUNCTIONAL_AREA='Procurement' or FUNCTIONAL_AREA='Fixed Assets')
group by FUNCTIONAL_AREA
Order by COUNT(PROJECT_ID) DESC
I'm getting a "Failed to parse SQL query!" error when I try to run validation.
Is this enough info for some assistance? Any help would really be appreciated.
Thanks,
Rachel

Hi, Rachel,
user10774102 wrote:
I originally posted this in the APEX forum but someone there suggested this is more of a SQL question. Anyone out there who can provide some assistance?
Hi,
I'm a new user on APEX with no real SQL knowledge and I'm trying to build a dashboard with charts into an existing APEX application. Based on another application, I have come up with the following SQL code:
select null link
, CATEGORY label
, count (decode(PROJECT_STATUS,'1',PROJECT_ID))"Active"
, count (decode(PROJECT_STATUS,'2',PROJECT_ID))"Complete"
, count (decode(PROJECT_STATUS,'3',PROJECT_ID))"On Hold"
, count (decode(PROJECT_STATUS,'4',PROJECT_ID))"Pipeline"
, count (decode(PROJECT_STATUS,'5',PROJECT_ID))"Pending Review"
from GRAPO_PROHEADTRK
where (PROJECT_STATUS='1' or PROJECT_STATUS='2' or PROJECT_STATUS='3' or PROJECT_STATUS='4' or PROJECT_STATUS='5' or PROJECT_STATUS='6')
group by CATEGORY
Order by COUNT(PROJECT_ID) DESCIs there a problem with the code above?
It's curious that the WHERE clause includes "PROJECT_STATUS='6'", but there is no pivoted column for project_status='6', like there is for '1' through '5'. That's not necessarily a mistake, and it wouldn't raise an error in any case.
Instead of
where (PROJECT_STATUS='1' or PROJECT_STATUS='2' or PROJECT_STATUS='3' or PROJECT_STATUS='4' or PROJECT_STATUS='5' or PROJECT_STATUS='6')you could say
where PROJECT_STATUS IN ('1', '2', '3', '4', '5', '6')but that probably has nothing to do with your current problem.
The code from the other app was:
select null link
, FUNCTIONAL_AREA label
, count (decode(PROJECT_STATUS,'Active',PROJECT_ID))"Active"
, count (decode(PROJECT_STATUS,'Complete',PROJECT_ID))"Complete"
, count (decode(PROJECT_STATUS,'On Hold',PROJECT_ID)) "On Hold"
, count (decode(PROJECT_STATUS,'Recurring',PROJECT_ID))"Recurring"
, count (decode(PROJECT_STATUS,'Pipeline',PROJECT_ID))"Pipeline"
, count (decode(PROJECT_STATUS,'Not Approved',PROJECT_ID))"Not Approved"
from PM_V2
where LOB='S2S' and (FUNCTIONAL_AREA='Accounts Payable' or FUNCTIONAL_AREA='Expense' or FUNCTIONAL_AREA='Procurement' or FUNCTIONAL_AREA='Fixed Assets')
group by FUNCTIONAL_AREA
Order by COUNT(PROJECT_ID) DESC
I'm getting a "Failed to parse SQL query!" error when I try to run validation.Is that an Apex error message? Sorry, I don't know anything about Apex.
If you can't get a more specific error message from Apex, then try debugging this statement in SQL*Plus. When you get it fixed, then you can copy it back into Apex.
If this is a SQL problem, then you should be able to re-create the problem in pure SQL.
If you can't re-create the problem in pure SQL, then it's probably an Apex problem, and belongs in the Apex forum, not here.
I don't see anything obviously wrong with your code, but I can't tell if, for example, you spelled a column name wrong, or if something has the wrong data type
Is this enough info for some assistance? Any help would really be appreciated.It wiould be better if you posted a completE script that people could run to re-create the problem, and to test their ideas.
Whenever you have a problem, please post a little sample data (CREATE TABLE and INSERT statements, relevant columns only) from all tables involved.
Also post the results you want from that data, and an explanation of how you get those results from that data, with specific examples.
Always say which version of Oracle (and any other software, such as Apex) you're using.

How to write sql query for counting pairs from below table??

Below is my SQL table structure.
user_id | Name | join_side | left_leg | right_leg | Parent_id
100001 Tinku Left 100002 100003 0
100002 Harish Left 100004 100005 100001
100003 Gorav Right 100006 100007 100001
100004 Prince Left 100008 NULL 100002
100005 Ajay Right NULL NULL 100002
100006 Simran Left NULL NULL 100003
100007 Raman Right NULL NULL 100003
100008 Vijay Left NULL NULL 100004
It is a binary table structure.. Every user has to add two per id under him, one is left_leg and second is right_leg... Parent_id is under which user current user is added.. Hope you will be understand..
I have to write sql query for counting pairs under id "100001". i know there will be important role of parent_id for counting pairs. * what is pair( suppose if any user contains both left_leg and right_leg id, then it is called pair.)
I know there are three pairs under id "100001" :-
1. 100002 and 100003
2. 100004 and 100005
3. 100006 and 100007
100008 will not be counted as pair because it does not have right leg..
But i dont know how to write sql query for this... Any help will be appreciated... This is my college project... And tommorow is the last date of submission.... Hope anyone will help me...
Suppose i have to count pair for id '100002'. Then there is only one pair under id '100002'. i.e 100004 and 100005

Sounds like this to me
DECLARE @ID int
SET @ID = 100001--your passed value
SELECT left_leg,right_leg
FROM table
WHERE (user_id = @ID
OR parent_id = @ID)
AND left_leg IS NOT NULL
AND right_leg IS NOT NULL
Please Mark This As Answer if it helps to solve the issue Visakh ---------------------------- http://visakhm.blogspot.com/ https://www.facebook.com/VmBlogs

SQL query for timestamp

I need to query a database from my java program for the time of each entry, but all that's in there is a timestamp. I haven't been able to query it. It was suggested that I convert it to a date in the sql database, but I don't know how to do this. Any suggestions?

LordEricO wrote:
I need to query a database from my java program for the time of each entry, but all that's in there is a timestamp. I haven't been able to query it. It was suggested that I convert it to a date in the sql database, but I don't know how to do this. Any suggestions?Question is not precise.
Do you want to query for a timestamp? Or do a query which returns a timestamp.
For the first it is unlikely that you want to query for an exact value. It is more likely that you want a range.
In either case you would be using prepared statements and Timestamp though.

Provide sql query for below one

hi everyone,
in my source table [finanace_dept] contains two columns [finance_id,r_mature_kd] with 2 million records and sample data given below.
finance_id r_mature_kd
1 H
1 T
1 T
2 T
3 H
4 S
4 T
4 T
5 X
6 H
6 L
6 L
6 M
please provide sql query for below expected output.
expected output :
finance_id r_mature_kd
1 H
1 T
4 S
4 T
6 H
6 L
6 M
for column finance_id: '1', contains three records, but two distinct r_mature_kd hence it should retrive only two records with H,T
for column finance_id: '2','3', contains only one record hence this records should not retrive.
for column finance_id: '6', contains four records, but three distinct r_mature_kd hence it should retrive only two records with H,L,M
please help on this.

WITH T(finance_id,r_mature_kd) AS (
SELECT 1, 'H' FROM DUAL UNION ALL
SELECT 1, 'T' FROM DUAL UNION ALL
SELECT 1, 'T' FROM DUAL UNION ALL
SELECT 2, 'T' FROM DUAL UNION ALL
SELECT 3, 'H' FROM DUAL UNION ALL
SELECT 4, 'S' FROM DUAL UNION ALL
SELECT 4, 'T' FROM DUAL UNION ALL
SELECT 4, 'T' FROM DUAL UNION ALL
SELECT 5, 'X' FROM DUAL UNION ALL
SELECT 6, 'H' FROM DUAL UNION ALL
SELECT 6, 'L' FROM DUAL UNION ALL
SELECT 6, 'L' FROM DUAL UNION ALL
SELECT 6, 'M' FROM DUAL
SELECT DISTINCT finance_id,r_mature_kd,C FROM(
SELECT finance_id,r_mature_kd,COUNT(1) OVER (PARTITION BY finance_id) C
FROM T
WHERE C > 1
ORDER BY 1
FINANCE_ID
R_MATURE_KD
C
1
H
3
1
T
3
4
S
3
4
T
3
6
H
4
6
L
4
6
M
4
Ramin Hashimzade

Better SQL Query for clients without boundaries?

I've been using and modifying/experimenting with Chris Nackers' SQL query for missing boundaries (http://myitforum.com/myitforumwp/2011/12/07/sql-query-to-identify-missing-smsconfigmgr-boundaries/)
below (changed to add aliases)--but this seems to mainly be showing us non-clients, as several computers that were indeed missing boundaries (using SCCM 2007 SP2 R3, and all our boundaries are protected, most are IP Range, a few IP Subnet, none AD Site) are
not being listed, and everything in the listing has NULL SYS.Client0.
Is there a better query to pinpoint this issue, or maybe using something (error code or log?) that would show computers that can't find a distribution point or some other evidence of not having a boundary?
Thanks!
SELECT DISTINCT SYS.Name0, SYS.Client0, IPA.IP_Addresses0, IPS.IP_Subnets0, SMSAS.SMS_Assigned_Sites0
FROM dbo.v_R_System SYS
LEFT OUTER JOIN dbo.v_RA_System_IPSubnets IPS ON SYS.ResourceID = IPS.ResourceID
LEFT OUTER JOIN dbo.v_RA_System_IPAddresses IPA ON SYS.ResourceID = IPA.ResourceID
LEFT OUTER JOIN dbo.v_RA_System_SMSAssignedSites SMSAS ON SYS.ResourceID = SMSAS.ResourceID
LEFT OUTER JOIN dbo.v_RA_System_SystemOUName SOU ON SYS.ResourceID = SOU.ResourceID
WHERE (SMSAS.SMS_Assigned_Sites0 IS NULL)
AND (NOT (IPA.IP_Addresses0 IS NULL))
AND (NOT (IPS.IP_Subnets0 IS NULL))
AND SYS.Operating_System_Name_and0 LIKE 'microsoft%server%'
ORDER BY IPS.IP_Subnets0, SYS.Name0

I gotcha now... I think most people, myself included, rely on finding clients that are not assigned to determine if a boundary is missing. If you expect clients to not be assigned that's not going to work for you.
WHERE (SMSAS.SMS_Assigned_Sites0
IS NULL)
AND (NOT (IPA.IP_Addresses0
IS NULL))
AND (NOT
(IPS.IP_Subnets0 IS
NULL))
= This is saying show me all clients not assigned but they do have an IP address and they do have a subnet discovered.
In the case of CM12 it is actually possible for that not to work anyway because you can have separate boundaries for client assignment and content lookup.
I am not aware of any query that can compare the IP address, AD Site and IP subnet from each client to what's configured in boundaries and find machines that do not fall into any boundary.
John Marcum | http://myitforum.com/myitforumwp/author/johnmarcum/

I have had my IPAD2 for quite a while but haven't activated my cellular data for about a year. I am now trying to activate and when I go to cellular data, turn it on and try to tap view account i just get a message that says "connection to server lost".

I have had my IPAD2 for quite a while but haven't activated my cellular data for about a year. I am now trying to activate and when I go to cellular data, turn it on and try to tap view account i just get a message that says "connection to server lost". I could swear the last time I used cellular data you would see the signal in the upper left corner and I only see "no service" there, I am in a location where I know I should have service. Is there something I should do to my IPAD? I tried resetting, I tried clearing cookies and history in Safari (after reading a post n these discussions). I don't know what to do next. My IOS version is 6.1.3. I did go into Network from the general tab and I see it says "SIM not provisioned". HELP and Thank you in advance.

Hello Theresa818,
Thank you for using Apple Support Communities!
It sounds like the cellular data will not activate for some reason on the iPad.
I found this article that will help you resolve this issue here, named iPad (Wi-Fi + Cellular Models): Troubleshooting a cellular data connection, found here http://support.apple.com/kb/TS4249
Check for a carrier settings update.
Update your iPad.
Toggle the Cellular Data setting off and on under Settings > Cellular Data.
Restart your iPad.
Tap Settings > General > About. Locate the Carrier entry and make sure that your carrier is correct.
If your SIM card has SIM PIN enabled, try turning it off: Tap Settings > Cellular Data > SIM PIN.
Make sure you're in an area of good coverage. If the cellular data connection works in another area, contact your carrier to report the original affected area.
Reset network settings: Tap Settings > General > Reset > Reset Network Settings.
Restore the iPad as new.
If none of the above steps resolves the issue, make an appointment at an Apple Retail Store, contact your carrier, or contact AppleCare to troubleshoot further.
I know you may have done one or two of the steps here, so you can skip those.
Take care,
Sterling

Error while executing a sql query for select

HI All,
ORA-01652: unable to extend temp segment by 128 in tablespace PSTEMP i'm getting this error while i'm executing the sql query for selecting the data.

I am having 44GB of temp space, while executing the below query my temp space is getting full, Expert please let us know how the issue can be resolved..
1. I dont want to increase the temp space
2. I need to tune the query, please provide your recomendations.
insert /*+APPEND*/ into CST_DSA.HIERARCHY_MISMATCHES
(REPORT_NUM,REPORT_TYPE,REPORT_DESC,GAP,CARRIED_ITEMS,CARRIED_ITEM_TYPE,NO_OF_ROUTE_OF_CARRIED_ITEM,CARRIED_ITEM_ROUTE_NO,CARRIER_ITEMS,CARRIER_ITEM_TYPE,CARRIED_ITEM_PROTECTION_TYPE,SOURCE_SYSTEM)
select
REPORTNUMBER,REPORTTYPE,REPORTDESCRIPTION ,NULL,
carried_items,carried_item_type,no_of_route_of_carried_item,carried_item_route_no,carrier_items,
carrier_item_type,carried_item_protection_type,'PACS'
from
(select distinct
c.REPORTNUMBER,c.REPORTTYPE,c.REPORTDESCRIPTION ,NULL,
a.carried_items,a.carried_item_type,a.no_of_route_of_carried_item,a.carried_item_route_no,a.carrier_items,
a.carrier_item_type,a.carried_item_protection_type,'PACS'
from CST_ASIR.HIERARCHY_asir a,CST_DSA.M_PB_CIRCUIT_ROUTING b ,CST_DSA.REPORT_METADATA c
where a.carrier_item_type in('Connection') and a.carried_item_type in('Service')
AND a.carrier_items=b.mux
and c.REPORTNUMBER=(case
when a.carrier_item_type in ('ServicePackage','Service','Connection') then 10
else 20
end)
and a.carrier_items not in (select carried_items from CST_ASIR.HIERARCHY_asir where carried_item_type in('Connection') ))A
where not exists
(select *
from CST_DSA.HIERARCHY_MISMATCHES B where
A.REPORTNUMBER=B.REPORT_NUM and
A.REPORTTYPE=B.REPORT_TYPE and
A.REPORTDESCRIPTION=B.REPORT_DESC and
A.CARRIED_ITEMS=B.CARRIED_ITEMS and
A.CARRIED_ITEM_TYPE=B.CARRIED_ITEM_TYPE and
A.NO_OF_ROUTE_OF_CARRIED_ITEM=B.NO_OF_ROUTE_OF_CARRIED_ITEM and
A.CARRIED_ITEM_ROUTE_NO=B.CARRIED_ITEM_ROUTE_NO and
A.CARRIER_ITEMS=B.CARRIER_ITEMS and
A.CARRIER_ITEM_TYPE=B.CARRIER_ITEM_TYPE and
A.CARRIED_ITEM_PROTECTION_TYPE=B.CARRIED_ITEM_PROTECTION_TYPE
AND B.SOURCE_SYSTEM='PACS'
Explain Plan
==========
Plan
INSERT STATEMENT ALL_ROWSCost: 129 Bytes: 1,103 Cardinality: 1
     20 LOAD AS SELECT CST_DSA.HIERARCHY_MISMATCHES
          19 PX COORDINATOR
               18 PX SEND QC (RANDOM) PARALLEL_TO_SERIAL SYS.:TQ10002 :Q1002Cost: 129 Bytes: 1,103 Cardinality: 1
                    17 NESTED LOOPS PARALLEL_COMBINED_WITH_PARENT :Q1002Cost: 129 Bytes: 1,103 Cardinality: 1
                         15 HASH JOIN RIGHT ANTI NA PARALLEL_COMBINED_WITH_PARENT :Q1002Cost: 129 Bytes: 1,098 Cardinality: 1
                              4 PX RECEIVE PARALLEL_COMBINED_WITH_PARENT :Q1002Cost: 63 Bytes: 359,283 Cardinality: 15,621
                                   3 PX SEND BROADCAST PARALLEL_TO_PARALLEL SYS.:TQ10001 :Q1001Cost: 63 Bytes: 359,283 Cardinality: 15,621
                                        2 PX BLOCK ITERATOR PARALLEL_COMBINED_WITH_CHILD :Q1001Cost: 63 Bytes: 359,283 Cardinality: 15,621
                                             1 MAT_VIEW ACCESS FULL MAT_VIEW PARALLEL_COMBINED_WITH_PARENT CST_ASIR.HIERARCHY :Q1001Cost: 63 Bytes: 359,283 Cardinality: 15,621
                              14 NESTED LOOPS ANTI PARALLEL_COMBINED_WITH_PARENT :Q1002Cost: 65 Bytes: 40,256,600 Cardinality: 37,448
                                   11 HASH JOIN PARALLEL_COMBINED_WITH_PARENT :Q1002Cost: 65 Bytes: 6,366,160 Cardinality: 37,448
                                        8 BUFFER SORT PARALLEL_COMBINED_WITH_CHILD :Q1002
                                             7 PX RECEIVE PARALLEL_COMBINED_WITH_PARENT :Q1002Cost: 1 Bytes: 214 Cardinality: 2
                                                  6 PX SEND BROADCAST PARALLEL_FROM_SERIAL SYS.:TQ10000 Cost: 1 Bytes: 214 Cardinality: 2
                                                       5 INDEX FULL SCAN INDEX CST_DSA.IDX$$_06EF0005 Cost: 1 Bytes: 214 Cardinality: 2
                                        10 PX BLOCK ITERATOR PARALLEL_COMBINED_WITH_CHILD :Q1002Cost: 63 Bytes: 2,359,224 Cardinality: 37,448
                                             9 MAT_VIEW ACCESS FULL MAT_VIEW PARALLEL_COMBINED_WITH_PARENT CST_ASIR.HIERARCHY :Q1002Cost: 63 Bytes: 2,359,224 Cardinality: 37,448
                                   13 TABLE ACCESS BY INDEX ROWID TABLE PARALLEL_COMBINED_WITH_PARENT CST_DSA.HIERARCHY_MISMATCHES :Q1002Cost: 0 Bytes: 905 Cardinality: 1
                                        12 INDEX RANGE SCAN INDEX PARALLEL_COMBINED_WITH_PARENT SYS.HIERARCHY_MISMATCHES_IDX3 :Q1002Cost: 0 Cardinality: 1
                         16 INDEX RANGE SCAN INDEX PARALLEL_COMBINED_WITH_PARENT CST_DSA.IDX$$_06EF0001 :Q1002Cost: 1 Bytes: 5 Cardinality: 1

Oracle SQL query for getting specific special characters from a table

Hi all,
This is my table
Table Name- Table1
S.no    Name
1          aaaaaaaa
2          a1234sgjghb
3          a@3$%jkhkjn
4          abcd-dfghjik
5          bbvxzckvbzxcv&^%#
6          ashgweqfg/gfjwgefj////
7          sdsaf$([]:'
8          <-fdsjgbdfsg
9           dfgfdgfd"uodf
10         aaaa bbbbz#$
11         cccc dddd-/mnm
The output has to be
S.no    Name
3          a@3$%jkhkjn
5          bbvxzckvbzxcv&^%#
7          sdsaf$([]:'
8          <-fdsjgbdfsg
10         aaaa bbbbz#$
It has to return "Name" column which is having special characters,whereas some special chars like -, / ," and space are acceptable.
The Oracle query has to print columns having special characters excluding -,/," and space
Can anyone help me to get a SQL query for the above.
Thanks in advance.

You can achieve it in multiple ways. Here are few.
SQL> with t
2 as
3 (
4 select 1 id, 'aaaaaaaa' name from dual union all
5 select 2 id, 'a1234sgjghb' name from dual union all
6 select 3 id, 'a@3$%jkhkjn' name from dual union all
7 select 4 id, 'abcd-dfghjik' name from dual union all
8 select 5 id, 'bbvxzckvbzxcv&^%#' name from dual union all
9 select 6 id, 'ashgweqfg/gfjwgefj////' name from dual union all
10 select 7 id, 'sdsaf$([]:''' name from dual union all
11 select 8 id, '<-fdsjgbdfsg' name from dual union all
12 select 9 id, 'dfgfdgfd"uodf' name from dual union all
13 select 10 id, 'aaaa bbbbz#$' name from dual union all
14 select 11 id, 'cccc dddd-/mnm' name from dual
15 )
16 select *
17    from t
18   where regexp_like(translate(name,'a-/" ','a'), '[^[:alnum:]]');
        ID NAME
         3 a@3$%jkhkjn
         5 bbvxzckvbzxcv&^%#
         7 sdsaf$([]:'
         8 <-fdsjgbdfsg
        10 aaaa bbbbz#$
SQL> with t
2 as
3 (
4 select 1 id, 'aaaaaaaa' name from dual union all
5 select 2 id, 'a1234sgjghb' name from dual union all
6 select 3 id, 'a@3$%jkhkjn' name from dual union all
7 select 4 id, 'abcd-dfghjik' name from dual union all
8 select 5 id, 'bbvxzckvbzxcv&^%#' name from dual union all
9 select 6 id, 'ashgweqfg/gfjwgefj////' name from dual union all
10 select 7 id, 'sdsaf$([]:''' name from dual union all
11 select 8 id, '<-fdsjgbdfsg' name from dual union all
12 select 9 id, 'dfgfdgfd"uodf' name from dual union all
13 select 10 id, 'aaaa bbbbz#$' name from dual union all
14 select 11 id, 'cccc dddd-/mnm' name from dual
15 )
16 select *
17    from t
18   where translate
19         (
20            lower(translate(name,'a-/" ','a'))
21          , '.0123456789abcdefghijklmnopqrstuvwxyz'
22          , '.'
23         ) is not null;
        ID NAME
         3 a@3$%jkhkjn
         5 bbvxzckvbzxcv&^%#
         7 sdsaf$([]:'
         8 <-fdsjgbdfsg
        10 aaaa bbbbz#$
SQL>

How to create sql query for item master with operator LIKE with variables?

hi all,
How to create sql query for item master with
operator LIKE(Contains,Start With,End With) with variables using query generator in SAP B1 ?
Jeyakanthan

Hi Jeyakanthan,
here is an example (put the like statement into the where field)
SELECT T0.CardCode, T0.CardName FROM OITM T0 WHERE T0.CardName Like '%%test%%'
The %% sign is a wildcard. If you need start with write 'test%%' and otherwise ends with '%%test'. For contains you need '%%test%%'. You also could combinate this statements like 'test%%abc%%'. This means starts with test and contains abc.
Regards Steffen

How to write sql query for below example.

Hi,
I have requirement.
There are number of rows and I need the result through query as follows.Please help me to proved sql query for below mentioned requirement.
example: table TEST.
COLA COLB COLC COLD
MANAGER 5 NULL null
SR.MANAGE 6 3 NULL
VP 5 5 4
I have to write the sql query if COLA IS MANAGER THEN CONSIDER MANGER RECORD,AND IF ANY COLUMN FILED IS NULL FOR MANGER THEN CONSIDER COLA IS SR.MANGER, AND IF ANY COLUMN FILED IS NULL FOR SR,MANGER THEN CONSIDER VP records.
I need output as below.
COLB COLC COLD
5(MANGER) 3(sr.manger) 5(vp)
Please provide the for above mentioned output.
Thanks

<<if COLA IS MANAGER THEN CONSIDER MANGER RECORD>>
What does this sentence means? COLA does not cnatin a single record but the number of records with diffrent values.
Regards
Arun

SQL Query for SSRS has data but fields don't show that data

Similar Messages

Maybe you are looking for