Sql query to find backgorund jobs and their associated reports

Hi Guys
is there any possibility to find job (jobname) their scheduling and the corresponding reports with their variant via sql queries?
Looking up the tables tbt-something only show %NEWSTEP for the INTREPORT value, so this isn´t clearifying at all.
Maybe you could tell me the tables where the reports and their variants are saved.
Cheers
Fabi

hi check this...
go to the table TIBCO
there you will find
jobname
jobgroup
report name
job status
but there is no varient specification and
%NEWSTEP is the report name

Similar Messages

[SQL QUERY] Select TCP Port Monitors and their related Watcher Node

Hi everybody,
I'm working on a SSRS report and SQL Query, I have no problem to find all my TCP Port Monitor (SCOM 2012 R2) based on the DisplayName, but I can't figure out how to get their related watcher nodes (in my case only 1 computer is a watcher node).
I can't find which table, which field, contains this information..?
Here is the query i started to write (i select * since i still searching for the right column):
SELECT
FROM StateView s
INNER JOIN BaseManagedEntity me on me.BaseManagedEntityId=s.BaseManagedEntityId
INNER JOIN MonitorView mv on mv.Id=s.MonitorId
INNER JOIN ManagedTypeView mtv on mtv.Id=s.TargetManagedEntityType
--where mv.DisplayName like 'Ping Target Status Check%'
AND me.IsDeleted = '0'
where mv.DisplayName like '%tcpmon%'
and mv.LanguageCode = 'ENU'
--and s.HealthState in (@state)
ORDER BY s.Lastmodified DESC
It would be great if someone can help me !
Thanks,
Julien

Hi,
After creating a TCP port monitor, we can find a table for this monitor under operationsmanager database :
SELECT *
FROM [OperationsManager].[dbo].[MT_TCPPortCheck_******WatcherComputersGroup]
You will find the warcher computer group.
Regards,
Yan Li
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

SQL query to find all suites that are associated with automation

I trying to incorporate CodeUI tests into a Release Mangement deployment template ... As a developer, I want to be able to specify a sub-tree of a test plan & only execute those test suites that are associated with automation. Is there a way to
extract all automated workitems and associated them with their respective test suites?
Any assistance would be greatly appreciated!

John,
I've partially resolved the issue of executing a sub-set of suites with the following powershell implementation:
1. Extract "potential" suite paths from a XML configuration file:
<?xml version="1.0"?>
<Configurations>
<Properties>
<Property key="DEFAULT" value="SuitePaths" />
<Property key="DatabaseServer" value="MYDBSERVER" />
<Property key="DatabaseInstance" value="Default" />
<Property key="DatabaseName" value="TFS_DefaultCollection" />
<Property key="ConfigurationName" value="US - Windows 7 and IE 10" />
</Properties>
<Notifications>
<Notification key="0" value="[email protected]" />
</Notifications>
<SuitePaths>
<SuitePath key="0" value="MyProject\WebProduct\Student\Features\Login" />
<SuitePath key="1" value="MyProject\WebProduct\Student\Features\Logout" />
</SuitePaths>
<AreaPaths>
<AreaPath key="0" value="MyProject\WebProduct\Student\Features\Login" />
</AreaPaths>
</Configurations>
2. Extract record set of suites from TFS via SQL query:
# FUNCTION: Retrieve-SuitePaths
# Parameters:
# (1.) LogFile -- Name of log file (e.g., C:\Temp or C:\Temp\DEPLOY_DatabaseServer_WebCMS2_DF06_20131031.6.log)
# (2.) Connection -- Database connection
# (3.) Paths -- Hash table of suite paths
Function Retrieve-SuitePaths
param
[Parameter(Mandatory=$True)][String]$LogFile,
[Parameter(Mandatory=$True)]$Connection,
[Parameter(Mandatory=$True)]$Paths
Write-Output '--------------------------------------------------------------------------------' | Out-File -FilePath $LogFile -Append
Write-Output "Retrieve suite(s): " | Out-File -FilePath $LogFile -Append
Write-Output '--------------------------------------------------------------------------------' | Out-File -FilePath $LogFile -Append
$SuitePaths = "("
$Counter = 0
foreach ($Key in $Paths.Keys)
if ($Counter -gt 0)
$SuitePaths = $SuitePaths + ", "
$SuitePaths = $SuitePaths + "'" + $Paths.Get_Item($Key) + "'"
$Counter += 1
$SuitePaths = $SuitePaths + ")"
# --DEBUG ONLY--> Write-Output "Paths: $SuitePaths" | Out-File -FilePath $LogFile -Append
$Command = New-Object System.Data.SqlClient.SqlCommand
$SQLStatement = "
WITH
cte_SuiteChildren
AS
-- Anchor definition to pull all certify modes
SELECT
S.[SuiteId],
S.[ProjectId],
PJ.ProjectName,
S.[PlanId],
P.[Name] AS PlanName,
S.[ParentSuiteId],
S.[SuitePath],
CONVERT(NVARCHAR(256), NULL) AS ParentTitle,
S.[Title],
0 AS RecurseLevel
FROM
[dbo].[tbl_Suite] AS S
INNER JOIN [dbo].[tbl_Plan] AS P ON S.PlanID = P.PlanID
INNER JOIN [dbo].[tbl_Project] AS PJ ON S.ProjectID = PJ.ProjectID
WHERE
S.ParentSuiteID = 0
UNION ALL
-- Recursive member to pull details of certify sessions
SELECT
S.[SuiteId],
S.[ProjectId],
PJ.ProjectName,
S.[PlanId],
P.[Name] AS PlanName,
S.[ParentSuiteId],
S.[SuitePath],
PS.[Title] AS ParentTitle,
S.[Title],
SC.[RecurseLevel] + 1 AS RecurseLevel
FROM
[dbo].[tbl_Suite] AS S
INNER JOIN cte_SuiteChildren AS SC on SC.SuiteID = S.ParentSuiteID
INNER JOIN [dbo].[tbl_Suite] AS PS ON SC.SuiteId = PS.SuiteId
INNER JOIN [dbo].[tbl_Plan] AS P ON S.PlanID = P.PlanID
INNER JOIN [dbo].[tbl_Project] AS PJ ON S.ProjectID = PJ.ProjectID
cte_SuiteLevel_0
AS
SELECT
SC.[ProjectId],
SC.[PlanId],
SC.[SuiteId],
SC.[ProjectName],
SC.[PlanName],
SC.[Title],
SC.[ProjectName] + '\' + SC.[PlanName] AS Path,
SC.[RecurseLevel]
FROM
cte_SuiteChildren AS SC
WHERE
SC.[RecurseLevel] = 0
cte_SuiteLevel_1
AS
SELECT
SC.[ProjectId],
SC.[PlanId],
SC.[ParentSuiteId],
SC.[SuiteId],
SC.[ProjectName],
SC.[PlanName],
SC.[Title],
SC.[RecurseLevel]
FROM
cte_SuiteChildren AS SC
WHERE
SC.[RecurseLevel] = 1
cte_SuiteLevel_2
AS
SELECT
SC.[ProjectId],
SC.[PlanId],
SC.[ParentSuiteId],
SC.[SuiteId],
SC.[ProjectName],
SC.[PlanName],
SC.[Title],
SC.[RecurseLevel]
FROM
cte_SuiteChildren AS SC
WHERE
SC.[RecurseLevel] = 2
cte_SuiteLevel_3
AS
SELECT
SC.[ProjectId],
SC.[PlanId],
SC.[ParentSuiteId],
SC.[SuiteId],
SC.[ProjectName],
SC.[PlanName],
SC.[Title],
SC.[RecurseLevel]
FROM
cte_SuiteChildren AS SC
WHERE
SC.[RecurseLevel] = 3
cte_SuiteLevel_4
AS
SELECT
SC.[ProjectId],
SC.[PlanId],
SC.[ParentSuiteId],
SC.[SuiteId],
SC.[ProjectName],
SC.[PlanName],
SC.[Title],
SC.[RecurseLevel]
FROM
cte_SuiteChildren AS SC
WHERE
SC.[RecurseLevel] = 4
cte_SuiteLevel_5
AS
SELECT
SC.[ProjectId],
SC.[PlanId],
SC.[ParentSuiteId],
SC.[SuiteId],
SC.[ProjectName],
SC.[PlanName],
SC.[Title],
SC.[RecurseLevel]
FROM
cte_SuiteChildren AS SC
WHERE
SC.[RecurseLevel] = 5
cte_SuiteLevel_6
AS
SELECT
SC.[ProjectId],
SC.[PlanId],
SC.[ParentSuiteId],
SC.[SuiteId],
SC.[ProjectName],
SC.[PlanName],
SC.[Title],
SC.[RecurseLevel]
FROM
cte_SuiteChildren AS SC
WHERE
SC.[RecurseLevel] = 6
cte_SuiteLevel_7
AS
SELECT
SC.[ProjectId],
SC.[PlanId],
SC.[ParentSuiteId],
SC.[SuiteId],
SC.[ProjectName],
SC.[PlanName],
SC.[Title],
SC.[RecurseLevel]
FROM
cte_SuiteChildren AS SC
WHERE
SC.[RecurseLevel] = 7
cte_SuiteLevel_8
AS
SELECT
SC.[ProjectId],
SC.[PlanId],
SC.[ParentSuiteId],
SC.[SuiteId],
SC.[ProjectName],
SC.[PlanName],
SC.[Title],
SC.[RecurseLevel]
FROM
cte_SuiteChildren AS SC
WHERE
SC.[RecurseLevel] = 8
cte_SuiteLevel_9
AS
SELECT
SC.[ProjectId],
SC.[PlanId],
SC.[ParentSuiteId],
SC.[SuiteId],
SC.[ProjectName],
SC.[PlanName],
SC.[Title],
SC.[RecurseLevel]
FROM
cte_SuiteChildren AS SC
WHERE
SC.[RecurseLevel] = 9
cte_SuiteLevel_10
AS
SELECT
SC.[ProjectId],
SC.[PlanId],
SC.[ParentSuiteId],
SC.[SuiteId],
SC.[ProjectName],
SC.[PlanName],
SC.[Title],
SC.[RecurseLevel]
FROM
cte_SuiteChildren AS SC
WHERE
SC.[RecurseLevel] = 10
cte_Suites
AS
SELECT
SL0.[ProjectId],
SL0.[PlanId],
CASE
WHEN SL2.ParentSuiteId IS NULL
THEN SL1.ParentSuiteId
ELSE CASE
WHEN SL3.ParentSuiteId IS NULL
THEN SL2.ParentSuiteId
ELSE CASE
WHEN SL4.ParentSuiteId IS NULL
THEN SL3.ParentSuiteId
ELSE CASE
WHEN SL5.ParentSuiteId IS NULL
THEN SL4.ParentSuiteId
ELSE CASE
WHEN SL6.ParentSuiteId IS NULL
THEN SL5.ParentSuiteId
ELSE CASE
WHEN SL7.ParentSuiteId IS NULL
THEN SL6.ParentSuiteId
ELSE CASE
WHEN SL8.ParentSuiteId IS NULL
THEN SL7.ParentSuiteId
ELSE CASE
WHEN SL9.ParentSuiteId IS NULL
THEN SL8.ParentSuiteId
ELSE CASE
WHEN SL10.ParentSuiteId IS NULL
THEN SL9.ParentSuiteId
ELSE SL10.ParentSuiteId
END
END
END
END
END
END
END
END
END AS [ParentSuiteId],
CASE
WHEN SL2.SuiteId IS NULL
THEN SL1.SuiteId
ELSE CASE
WHEN SL3.SuiteId IS NULL
THEN SL2.SuiteId
ELSE CASE
WHEN SL4.SuiteId IS NULL
THEN SL3.SuiteId
ELSE CASE
WHEN SL5.SuiteId IS NULL
THEN SL4.SuiteId
ELSE CASE
WHEN SL6.SuiteId IS NULL
THEN SL5.SuiteId
ELSE CASE
WHEN SL7.SuiteId IS NULL
THEN SL6.SuiteId
ELSE CASE
WHEN SL8.SuiteId IS NULL
THEN SL7.SuiteId
ELSE CASE
WHEN SL9.SuiteId IS NULL
THEN SL8.SuiteId
ELSE CASE
WHEN SL10.SuiteId IS NULL
THEN SL9.SuiteId
ELSE SL10.SuiteId
END
END
END
END
END
END
END
END
END AS [SuiteId],
SL0.ProjectName,
SL0.PlanName,
--SL0.Path,
--SL1.[Title],
CASE
WHEN SL2.Title IS NULL
THEN SL0.Path + '\' + SL1.Title
ELSE CASE
WHEN SL3.Title IS NULL
THEN SL0.Path + '\' + SL1.Title + '\' + SL2.Title
ELSE CASE
WHEN SL4.Title IS NULL
THEN SL0.Path + '\' + SL1.Title + '\' + SL2.Title + '\' + SL3.Title
ELSE CASE
WHEN SL5.Title IS NULL
THEN SL0.Path + '\' + SL1.Title + '\' + SL2.Title + '\' + SL3.Title + '\' + SL4.Title
ELSE CASE
WHEN SL6.Title IS NULL
THEN SL0.Path + '\' + SL1.Title + '\' + SL2.Title + '\' + SL3.Title + '\' + SL4.Title + '\' + SL5.Title
ELSE CASE
WHEN SL7.Title IS NULL
THEN SL0.Path + '\' + SL1.Title + '\' + SL2.Title + '\' + SL3.Title + '\' + SL4.Title + '\' + SL5.Title + '\' + SL6.Title
ELSE CASE
WHEN SL8.Title IS NULL
THEN SL0.Path + '\' + SL1.Title + '\' + SL2.Title + '\' + SL3.Title + '\' + SL4.Title + '\' + SL5.Title + '\' + SL6.Title + '\' + SL7.Title
ELSE CASE
WHEN SL9.Title IS NULL
THEN SL0.Path + '\' + SL1.Title + '\' + SL2.Title + '\' + SL3.Title + '\' + SL4.Title + '\' + SL5.Title + '\' + SL6.Title + '\' + SL7.Title + '\' + SL8.Title
ELSE CASE
WHEN SL10.Title IS NULL
THEN SL0.Path + '\' + SL1.Title + '\' + SL2.Title + '\' + SL3.Title + '\' + SL4.Title + '\' + SL5.Title + '\' + SL6.Title + '\' + SL7.Title + '\' + SL8.Title + '\' + SL9.Title
ELSE SL0.Path + '\' + SL1.Title + '\' + SL2.Title + '\' + SL3.Title + '\' + SL4.Title + '\' + SL5.Title + '\' + SL6.Title + '\' + SL7.Title + '\' + SL8.Title + '\' + SL9.Title + '\' + SL10.Title
END
END
END
END
END
END
END
END
END AS Path,
CASE
WHEN SL2.RecurseLevel IS NULL
THEN SL1.RecurseLevel
ELSE CASE
WHEN SL3.RecurseLevel IS NULL
THEN SL2.RecurseLevel
ELSE CASE
WHEN SL4.RecurseLevel IS NULL
THEN SL3.RecurseLevel
ELSE CASE
WHEN SL5.RecurseLevel IS NULL
THEN SL4.RecurseLevel
ELSE CASE
WHEN SL6.RecurseLevel IS NULL
THEN SL5.RecurseLevel
ELSE CASE
WHEN SL7.RecurseLevel IS NULL
THEN SL6.RecurseLevel
ELSE CASE
WHEN SL8.RecurseLevel IS NULL
THEN SL7.RecurseLevel
ELSE CASE
WHEN SL9.RecurseLevel IS NULL
THEN SL8.RecurseLevel
ELSE CASE
WHEN SL10.RecurseLevel IS NULL
THEN SL9.RecurseLevel
ELSE SL10.RecurseLevel
END
END
END
END
END
END
END
END
END AS RecurseLevel
FROM
cte_SuiteLevel_0 AS SL0
LEFT OUTER JOIN cte_SuiteLevel_1 AS SL1 ON SL1.ParentSuiteId = SL0.SuiteId
LEFT OUTER JOIN cte_SuiteLevel_2 AS SL2 ON SL2.ParentSuiteId = SL1.SuiteId
LEFT OUTER JOIN cte_SuiteLevel_3 AS SL3 ON SL3.ParentSuiteId = SL2.SuiteId
LEFT OUTER JOIN cte_SuiteLevel_4 AS SL4 ON SL4.ParentSuiteId = SL3.SuiteId
LEFT OUTER JOIN cte_SuiteLevel_5 AS SL5 ON SL5.ParentSuiteId = SL4.SuiteId
LEFT OUTER JOIN cte_SuiteLevel_6 AS SL6 ON SL6.ParentSuiteId = SL5.SuiteId
LEFT OUTER JOIN cte_SuiteLevel_7 AS SL7 ON SL7.ParentSuiteId = SL6.SuiteId
LEFT OUTER JOIN cte_SuiteLevel_8 AS SL8 ON SL8.ParentSuiteId = SL7.SuiteId
LEFT OUTER JOIN cte_SuiteLevel_9 AS SL9 ON SL9.ParentSuiteId = SL8.SuiteId
LEFT OUTER JOIN cte_SuiteLevel_10 AS SL10 ON SL10.ParentSuiteId = SL9.SuiteId
SELECT
SS.[ProjectId],
SS.[PlanId],
SS.[ParentSuiteId],
SS.[SuiteId],
SS.[ProjectName],
SS.[PlanName],
SS.[Path],
SS.[RecurseLevel]
FROM
SELECT DISTINCT
S.[ProjectId],
S.[PlanId],
S.[ParentSuiteId],
S.[SuiteId],
S.[ProjectName],
S.[PlanName],
S.[Path],
S.[RecurseLevel]
FROM
cte_Suites AS S
WHERE
S.[RecurseLevel] IS NOT NULL
AND S.[Path] IN $($SuitePaths)
) AS SS
ORDER BY
SS.[Path]
$Command.CommandText = $SQLStatement
$Command.Connection = $Connection
$Command.CommandTimeout = 240
$DataAdapter = New-Object System.Data.SqlClient.SqlDataAdapter
$DataAdapter.SelectCommand = $Command
$DataSet = New-Object System.Data.DataSet
$DataAdapter.Fill($DataSet) | Out-Null
Write-Output "$SQLStatement" | Out-File -FilePath $LogFile -Append
# --DEBUG ONLY--> $DataSet.Tables[0]
return $DataSet
3. Execute every suite in the record set via TCM
$DataSet = ( Retrieve-SuitePaths -LogFile:$LogFile -Connection:$Connection -Path:$Paths)
# --DEBUG ONLY--> $DataSet.Tables[0].Rows.Count
# --DEBUG ONLY--> $DataSet.Tables[0]
# Determine whether or not any test suites were retrieved from TFS....
if ( $DataSet.Tables[0].Rows.Count -gt 0 )
$ListTestRunID = $null
$SumFailed = 0
$SumInconclusive = 0
foreach ($Row in $DataSet.Tables[0].Rows)
# Set project, plan & suite variables....
[Int16]$ProjectID = $Row.Item('ProjectId')
[Int16]$PlanID = $Row.Item('PlanId')
[Int16]$ParentSuiteID = $Row.Item('ParentSuiteId')
[Int16]$SuiteID = $Row.Item('SuiteId')
$ProjectName = $Row.Item('ProjectName')
$PlanName = $Row.Item('PlanName')
$Path = $Row.Item('Path')
$RecurseLevel = $Row.Item('RecurseLevel')
# Set local build path variable....
switch -wildcard ($Path)
"*WebCMS*\Administration\*"
$CUITBuildPath = $CUITPathUNC + '\WebCMS\Administration'
"*WebCMS*\Instructor\*"
$CUITBuildPath = $CUITPathUNC + '\WebCMS\Instructor'
"*WebCMS*\Student\*"
$CUITBuildPath = $CUITPathUNC + '\WebCMS\Student'
"*WebProduct*\Instructor\*"
$CUITBuildPath = $CUITPathUNC + '\WebProduct\Instructor'
"*WebProduct*\Student\*"
$CUITBuildPath = $CUITPathUNC + '\WebProduct\Student'
default
$CUITBuildPath = $CUITPathUNC
Write-Output '--------------------------------------------------------------------------------' | Out-File -FilePath $LogFile -Append
Write-Output 'Test Suite:' | Out-File -FilePath $LogFile -Append
Write-Output '--------------------------------------------------------------------------------' | Out-File -FilePath $LogFile -Append
Write-Output " ID:" | Out-File -FilePath $LogFile -Append
Write-Output " Project: $ProjectID" | Out-File -FilePath $LogFile -Append
Write-Output " Plan: $PlanID" | Out-File -FilePath $LogFile -Append
Write-Output " Parent Suite: $ParentSuiteID" | Out-File -FilePath $LogFile -Append
Write-Output " Suite: $SuiteID" | Out-File -FilePath $LogFile -Append
Write-Output " Config: $ConfigurationID" | Out-File -FilePath $LogFile -Append
Write-Output " Name:" | Out-File -FilePath $LogFile -Append
Write-Output " Project: $ProjectName" | Out-File -FilePath $LogFile -Append
Write-Output " Plan: $PlanName" | Out-File -FilePath $LogFile -Append
Write-Output " Config: $ConfigurationName" | Out-File -FilePath $LogFile -Append
Write-Output " Path:" | Out-File -FilePath $LogFile -Append
Write-Output " Suite: $Path" | Out-File -FilePath $LogFile -Append
Write-Output " Build: $CUITBuildPath" | Out-File -FilePath $LogFile -Append
# --DEBUG ONLY--> Write-Output " Recursion: $RecurseLevel" | Out-File -FilePath $LogFile -Append
Write-Output '--------------------------------------------------------------------------------' | Out-File -FilePath $LogFile -Append
# Set TCM arguements....
$ArguementPlanID = "/planid:$PlanID"
$ArguementTitle = "/title:$Title - $Path (SuiteID: $SuiteID)"
$ArguementSuiteID = "/suiteid:$SuiteID"
$ArguementConfigurationID = "/configid:$ConfigurationID"
$ArguementTFSCollection = "/collection:$TFSCollection"
$ArguementTeamProject = "/teamproject:$TFSTeamProject"
if(![string]::IsNullOrEmpty($CUITBuildPath))
$ArguementBuildDirectory = "/builddir:$CUITBuildPath"
$ArguementBuild = ""
$ArguementBuildDefinition = ""
else
$ArguementBuildDirectory = ""
$ArguementBuild = "/build:$TFSBuild"
$ArguementBuildDefinition = "/builddefinition:$BuildDefinition"
$ArguementTestEnvironment = "/testenvironment:$WebServer"
$ArguementSettingsName = ""
if(![string]::IsNullOrEmpty($SettingsName))
$ArguementSettingsName = "/settingsname:$SettingsName"
# Create test run....
Write-Host "$TCMEXE 'run' '/create' $ArguementTitle $ArguementPlanID $ArguementSuiteID $ArguementConfigurationID $ArguementTFSCollection $ArguementTeamProject $ArguementBuild $ArguementBuildDefinition $ArguementBuildDirectory $ArguementTestEnvironment $ArguementSettingsName"
Write-Output " $TCMEXE 'run' '/create' $ArguementTitle $ArguementPlanID $ArguementSuiteID $ArguementConfigurationID $ArguementTFSCollection $ArguementTeamProject $ArguementBuild $ArguementBuildDefinition $ArguementBuildDirectory $ArguementTestEnvironment $ArguementSettingsName" | Out-File -FilePath $LogFile -Append
try
$TestRunID = & $TCMEXE 'run' '/create' $ArguementTitle $ArguementPlanID $ArguementSuiteID $ArguementConfigurationID $ArguementTeamProject $ArguementTFSCollection $ArguementBuild $ArguementBuildDefinition $ArguementBuildDirectory $ArguementTestEnvironment $ArguementSettingsName
catch
$ExitMessage = $_Exception.Message
# --DEBUG ONLY--> Write-Output "TestRunID: $TestRunID" | Out-File -FilePath $LogFile -Append
if ($TestRunID -match '.+\:\s(?<TestRunID>\d+)\.')
# The test run ID is identified as a property in the match collection so we can access it directly by using the group name from the regular expression (i.e. TestRunID).
$TestRunID = $matches.TestRunID
$ArguementID = "/id:$TestRunID"
$TestRunResultsFile = $TempDirectory + "\TestRunResults$TestRunID.trx"
$ArguementQueryText = "/querytext:SELECT * FROM TestRun WHERE TestRunID=$TestRunID"
$ArguementResultsFile = "/resultsfile:""$TestRunResultsFile"""
Write-Host " Waiting for test run to complete ..."
Write-Host $TCMEXE 'run' '/list' $ArguementTeamProject $ArguementTFSCollection $ArguementQueryText
Write-Output " $TCMEXE 'run' '/list' $ArguementTeamProject $ArguementTFSCollection $ArguementQueryText" | Out-File -FilePath $LogFile -Append
$WaitingForTestRunCompletion = $true
$WaitCount= 0
while ($WaitingForTestRunCompletion)
$WaitCount = $WaitCount + 1
Write-Output " Waiting ($WaitCount)...." | Out-File -FilePath $LogFile -Append
Start-Sleep -s $TestRunWaitDelay
$TestRunStatus = & $TCMEXE 'run' '/list' $ArguementTeamProject $ArguementTFSCollection $ArguementQueryText
$TestRunStatus
if ($TestRunStatus.Count -lt 3 -or ($TestRunStatus.Count -gt 2 -and $TestRunStatus.GetValue(2) -match '.+(?<DateCompleted>\d+[/]\d+[/]\d+)'))
$WaitingForTestRunCompletion = $false
Write-Host "Evaluating test run $TestRunID results..."
# Take small pause(s) since the results might not be published yet....
Start-Sleep -s $TestRunWaitDelay
# Export results....
Write-Host $TCMEXE 'run' '/export' $ArguementID $ArguementTeamProject $ArguementTFSCollection $ArguementResultsFile
Write-Output " $TCMEXE 'run' '/export' $ArguementID $ArguementTeamProject $ArguementTFSCollection $ArguementResultsFile" | Out-File -FilePath $LogFile -Append
$WaitingForTestRunExport = $true
$WaitCount= 0
while ($WaitingForTestRunExport -and $WaitCount -lt 5)
$WaitCount = $WaitCount + 1
Write-Output " Waiting ($WaitCount)...." | Out-File -FilePath $LogFile -Append
$ExportResult = & $TCMEXE 'run' '/export' $ArguementID $ArguementResultsFile $ArguementTFSCollection $ArguementTeamProject
if ([System.IO.File]::Exists($TestRunResultsFile))
$WaitingForTestRunExport = $false
if ([System.IO.File]::Exists($TestRunResultsFile))
# Load the XML document contents.
[xml]$TestResultsXML = Get-Content "$TestRunResultsFile"
# Extract the results of the test run.
$TotalTests = $TestResultsXML.TestRun.ResultSummary.Counters.total
$PassedTests = $TestResultsXML.TestRun.ResultSummary.Counters.passed
$FailedTests = $TestResultsXML.TestRun.ResultSummary.Counters.failed
$InconclusiveTests = $TestResultsXML.TestRun.ResultSummary.Counters.inconclusive
# Output the results of the test run.
Write-Host "========== Test: $TotalTests tests ran, $PassedTests succeeded, $FailedTests failed, $InconclusiveTests inconclusive =========="
Write-Output "--------------------------------------------------------------------------------" | Out-File -FilePath $LogFile -Append
Write-Output "Summary:" | Out-File -FilePath $LogFile -Append
Write-Output "--------------------------------------------------------------------------------" | Out-File -FilePath $LogFile -Append
Write-Output " Total: $TotalTests" | Out-File -FilePath $LogFile -Append
Write-Output " Passed: $PassedTests" | Out-File -FilePath $LogFile -Append
Write-Output " Failed: $FailedTests" | Out-File -FilePath $LogFile -Append
Write-Output " Inconclusive: $InconclusiveTests" | Out-File -FilePath $LogFile -Append
$SumFailed += $FailedTests
$SumInconclusive += $InconclusiveTests
# Remove the test run results file.
[System.IO.File]::Delete($TestRunResultsFile) | Out-Null
# Add "current" TestRunID to the list of TestRunID(s)....
if ($ListTestRunID -ne $null)
$ListTestRunID = $ListTestRunID + ', '
$ListTestRunID = $ListTestRunID + $TestRunID
# Next test suite....
4. Extract record set of test runs from TFS via SQL query:
# FUNCTION: Retrieve-TestRuns
# Parameters:
# (1.) LogFile -- Name of log file (e.g., C:\Temp or C:\Temp\DEPLOY_DatabaseServer_WebCMS2_DF06_20131031.6.log)
# (2.) Connection -- Database connection
# (3.) ListTestRunID -- List of test run identifiers
Function Retrieve-TestRuns
param
[Parameter(Mandatory=$True)][String]$LogFile,
[Parameter(Mandatory=$True)]$Connection,
[Parameter(Mandatory=$True)][String]$ListTestRunID
Write-Output '--------------------------------------------------------------------------------' | Out-File -FilePath $LogFile -Append
Write-Output "Retrieve test run(s): " | Out-File -FilePath $LogFile -Append
Write-Output '--------------------------------------------------------------------------------' | Out-File -FilePath $LogFile -Append
$TestRuns = '(' + $ListTestRunID + ')'
$Command = New-Object System.Data.SqlClient.SqlCommand
$SQLStatement = "
WITH
cte_State
AS
SELECT 0 AS [StateID], 'Unspecified' AS [StateName]
UNION ALL
SELECT 1 AS [OutcomeId], 'To Be Determined (1)' AS [StateName]
UNION ALL
SELECT 2 AS [StateID], 'In Progress' AS [StateName]
UNION ALL
SELECT 3 AS [StateID], 'Completed' AS [StateName]
UNION ALL
SELECT 4 AS [StateID], 'Aborted' AS [StateName]
UNION ALL
SELECT 5 AS [OutcomeId], 'To Be Determined (5)' AS [StateName]
UNION ALL
SELECT 6 AS [StateID], 'Needs Investigation' AS [StateName]
SELECT
TR.[ProjectId] AS [Project Id],
P.[ProjectName],
TR.[TestPlanId] AS [Plan Id],
TP.Name AS [TestPlanName],
TR.[TestRunId] AS [Run Id],
TR.[Title],
S.[StateID] AS [State Id],
S.[StateName] AS [State],
TR.[StartDate] AS [Date Started],
TR.[CompleteDate] AS [Date Completed],
DATEDIFF(SECOND, TR.[StartDate], TR.[CompleteDate]) AS Duration,
TR.[Type],
TR.[IsAutomated],
TR.[TotalTests] AS [Total],
TR.[PassedTests] AS [Passed],
TR.[IncompleteTests] AS [Incomplete],
TR.[UnanalyzedTests] AS [Unanalyzed],
TR.[NotApplicableTests] AS [Not Applicable]
FROM
[Tfs_DefaultCollection].[dbo].[tbl_TestRun] AS TR
INNER JOIN [Tfs_DefaultCollection].[dbo].[tbl_Project] AS P ON TR.ProjectId = P.ProjectId
INNER JOIN [Tfs_DefaultCollection].[dbo].[tbl_Plan] AS TP ON TR.TestPlanId = TP.PlanId
INNER JOIN cte_State AS S ON TR.[State] = S.[StateID]
WHERE
TR.TestRunId IN $($TestRuns)
ORDER BY
TR.[StartDate]
$Command.CommandText = $SQLStatement
$Command.Connection = $Connection
$Command.CommandTimeout = 30
$DataAdapter = New-Object System.Data.SqlClient.SqlDataAdapter
$DataAdapter.SelectCommand = $Command
$DataSet = New-Object System.Data.DataSet
$DataAdapter.Fill($DataSet) | Out-Null
Write-Output "$SQLStatement" | Out-File -FilePath $LogFile -Append
# --DEBUG ONLY--> $DataSet.Tables[0]
return $DataSet
5. Extract record set of test results from TFS via SQL query:
# FUNCTION: Retrieve-TestRunResults
# Parameters:
# (1.) LogFile -- Name of log file (e.g., C:\Temp or C:\Temp\DEPLOY_DatabaseServer_WebCMS2_DF06_20131031.6.log)
# (2.) Connection -- Database connection
# (3.) ListTestRunID -- List of test run identifiers
Function Retrieve-TestRunResults
param
[Parameter(Mandatory=$True)][String]$LogFile,
[Parameter(Mandatory=$True)]$Connection,
[Parameter(Mandatory=$True)][String]$ListTestRunID
Write-Output '--------------------------------------------------------------------------------' | Out-File -FilePath $LogFile -Append
Write-Output "Retrieve test result(s): " | Out-File -FilePath $LogFile -Append
Write-Output '--------------------------------------------------------------------------------' | Out-File -FilePath $LogFile -Append
$TestRuns = '(' + $ListTestRunID + ')'
$Command = New-Object System.Data.SqlClient.SqlCommand
$SQLStatement = "
WITH
cte_Outcome
AS
SELECT 0 AS [OutcomeId], 'To Be Determined (0)' AS [OutcomeName]
UNION ALL
SELECT 1 AS [OutcomeId], 'In Progress' AS [OutcomeName]
UNION ALL
SELECT 2 AS [OutcomeId], 'Passed' AS [OutcomeName]
UNION ALL
SELECT 3 AS [OutcomeId], 'Failed' AS [OutcomeName]
UNION ALL
SELECT 4 AS [OutcomeId], 'Inconclusive' AS [OutcomeName]
UNION ALL
SELECT 5 AS [OutcomeId], 'To Be Determined (5)' AS [OutcomeName]
UNION ALL
SELECT 6 AS [OutcomeId], 'Aborted' AS [OutcomeName]
UNION ALL
SELECT 7 AS [OutcomeId], 'Blocked' AS [OutcomeName]
UNION ALL
SELECT 8 AS [OutcomeId], 'Not Executed' AS [OutcomeName]
UNION ALL
SELECT 10 AS [OutcomeId], 'Error' AS [OutcomeName]
UNION ALL
SELECT 11 AS [OutcomeId], 'Not Applicable' AS [OutcomeName]
UNION ALL
SELECT 12 AS [OutcomeId], 'Paused' AS [OutcomeName]
UNION ALL
SELECT 13 AS [OutcomeId], 'To Be Determined (13)' AS [OutcomeName]
UNION ALL
SELECT 255 AS [OutcomeId], 'Never Run' AS [OutcomeName]
cte_State
AS
SELECT 0 AS [StateID], 'None' AS [StateName]
UNION ALL
SELECT 1 AS [StateID], 'Ready' AS [StateName]
UNION ALL
SELECT 2 AS [StateID], 'Completed' AS [StateName]
UNION ALL
SELECT 3 AS [StateID], 'Not Ready' AS [StateName]
UNION ALL
SELECT 4 AS [StateID], 'In Progress' AS [StateName]
UNION ALL
SELECT 5 AS [StateID], 'To Be Determined' AS [StateName]
SELECT DISTINCT
TR.[TestRunId] AS [Run Id],
TR.[TestCaseId] AS [Case Id],
O.[OutcomeID] AS [Outcome Id],
O.[OutcomeName] AS [Outcome],
S.[StateID] AS [State Id],
S.[StateName] AS [State],
TR.[TestCaseTitle] AS [Title],
TR.[AutomatedTestName] AS [Automation Method],
TR.[DateStarted] AS [Date Started],
TR.[DateCompleted] AS [Date Completed],
DATEDIFF(SECOND, TR.[DateStarted], TR.[DateCompleted]) AS Duration,
TR.[FailureType] AS [Failure Type],
TR.[ErrorMessage] AS [Error]
FROM
[Tfs_DefaultCollection].[dbo].[tbl_TestResult] AS TR
INNER JOIN cte_Outcome AS O ON TR.Outcome = O.OutcomeID
INNER JOIN cte_State AS S ON TR.State = S.StateID
WHERE
TR.TestRunId IN $($TestRuns)
ORDER BY
TR.[TestRunId],
O.[OutcomeName],
TR.[TestCaseTitle]
$Command.CommandText = $SQLStatement
$Command.Connection = $Connection
$Command.CommandTimeout = 30
$DataAdapter = New-Object System.Data.SqlClient.SqlDataAdapter
$DataAdapter.SelectCommand = $Command
$DataSet = New-Object System.Data.DataSet
$DataAdapter.Fill($DataSet) | Out-Null
Write-Output '--------------------------------------------------------------------------------' | Out-File -FilePath $LogFile -Append
Write-Output "SQL Statement: " | Out-File -FilePath $LogFile -Append
Write-Output '--------------------------------------------------------------------------------' | Out-File -FilePath $LogFile -Append
Write-Output "$SQLStatement" | Out-File -FilePath $LogFile -Append
# --DEBUG ONLY--> $DataSet.Tables[0]
return $DataSet
6. Email results to distribution list
Currently, I'm simplifying the extraction of suite path ... replacing hardcoded depth with STUFF() & XML PATH
Carl.

SQL Query to find menus and submenus attached to responsibility

Hi,
I am looking for help to find out a sql query to pull out the list of all the menu's associated with each of the responsibilities assigned to users. Please let me know any SQL query to find out menus attached for responsibilities assigned to users.

835129 wrote:
I was asked by my lead to list out responsibilities and attached menus and I was asked to submit the output from production. In the metalink note provided by you it was asked to create table collecting all menu id's and I cannot create any tables in production. Apart from this there were 1000's of users with different responsibilities and different menus. I cannot collect all of the users menu ids.
I just want to list out responsibilities and attached menus. Is that something you can helpout withhttps://forums.oracle.com/forums/search.jspa?threadID=&q=fnd_responsibility_vl+AND+fnd_menu&objID=c3&dateRange=all&userID=&numResults=15&rankBy=10001
https://forums.oracle.com/forums/search.jspa?threadID=&q=fnd_responsibility_tl+AND+FND_MENU_ENTRIES_TL&objID=c3&dateRange=all&userID=&numResults=15&rankBy=10001
Please search the forum for these tables/views and you should get many hits:
FND_MENU_ENTRIES_TL
FND_MENU_ENTRIES_VL
FND_RESPONSIBILITY_TL
FND_RESPONSIBILITY_VL
Thanks,
Hussein

SQL Query to find DN and phone Load

Hi All,
We are using Call Manager 8.6 [one PUB and 4 SUBs] and have different IP phone models .
IP phone model have different LOAD working with them like few 3905 have cmterm-3905.9-2-2-0 while some have cmterm-3905.9-2-2ES7 .
Is there any way/SQL Query to find out what all phone model with DN are running 3905.9-2-2.0 LOAD?
regds,
aman

Hey Aman,
Hope all is well my friend!
Just to add a note to my friend Carlo's good info here (+5!)
Try;
Device> Device Settings> Firmware Load Information>Device Not Using Default Load
This will show you any phones that deviate from the "device defaults" Fimware And if you click
on any device listed here it will show the actual Firmware that is being used on the specified device.
Cheers!
Rob

Can I put a SQL query into a bind variable and then use it to output report

Hi,
Can I put a SQL query into a bind variable and then use it to output report?
I want to create a report and an item "text area" (say P1_TEXT) which can let user to input a SQL query(they are all technical users and knows SQL very well). Then, I use a bind variable (that text area) to store the SQL statement. Then, I add a submit button and I want to use the following to output the report:
select * from (:P1_TEXT);
Do you think it is possible to do that? Any known limitations for APEX in this area?
Thanks a lot,
Angela

You can, but make sure it's what you really want to do. Make sure you are VERY familiar with SQL Injection. Most people who know what it is, go out of their way to prevent SQL Injection. You're going out of your way to allow it.
You can try using &P1_TEXT. instead of bind variable syntax. Bind variables are one of the best ways to prevent SQL Injection, which is why it's not working for you.
Once again, I strongly urge you to consider the implications of your app, but this suggestion should get it working.
Tyler

Sql query to find the balances for a customer account wise.

Hi,
Could someone help me with the sql query to find the balances for each customer account wise. This is need to generate the report.
presently we are using this query, but the output doesnot return the expected result.
SELECT sum(nvl(ps.acctd_amount_due_remaining,0)) "Balance"
FROM      ra_cust_trx_line_gl_dist_all gld,
          gl_code_combinations c,
          ar_payment_schedules_all ps,
          RA_CUSTOMER_TRX_ALL rat,
          ra_customers rc
WHERE      c.CHART_OF_ACCOUNTS_ID = 101
and gld.code_combination_id = c.code_combination_id
     and rat.CUSTOMER_TRX_ID=gld.CUSTOMER_TRX_ID
     and rat.CUSTOMER_TRX_ID=ps.CUSTOMER_TRX_ID
and ps.customer_id=rc.customer_id
     and ps.status='OP'
     and ps.gl_date <= :PDATE
     and ps.org_id=:PORGID
     and ps.class in ('GUAR','INV','DM','DEP')
and c.SEGMENT4=:Account_id
and ps.customer_id=:Customer_id
Thanks in advance.
Kalyan.

Can someone help us with this.

Can anybody provide the SQL query to find the files uploaded in a particular folder?

Hi All,
Can anybody provide the SQL query to find the documents (document name) uploaded in a particular folder? While clicking on folder in
GUI I'm hitting the Timeout error. I would like to find the files uploaded into this folder from SQLPLUS.
Any help is greatly appreciated.
With best regards,
Nevin

Nevin,
Be great if we could know the version of Portal. For Rel. 1, here's the query
select id,masterthingid from wwv_things
where siteid = &site
and cornerid = &corner
&site - Content Area id
&corner - Folder id
if you don't know the folder id, use
select id from wwv_corners where siteid = &site
and name = &folder
Hope this helps. I have run into this situation before. Usually, the culprits were
one of the following:
1. Junk Characters in description of item (caused due to Copy-Paste)
2. Special Characters in the File name
Hi All,
Can anybody provide the SQL query to find the documents (document name) uploaded in a particular folder? While clicking on folder in
GUI I'm hitting the Timeout error. I would like to find the files uploaded into this folder from SQLPLUS.
Any help is greatly appreciated.
With best regards,
Nevin

Sql query to find all contacts for an account

I wonder if someone wrote an sql query to find all contacts for an account number in Oracle customer master. We are on EBS 11.5.10.
I am also looking for sql query to find all ship to addresses for an account number.
Thanks.

Can you also post the query for people who read this post and are also looking for an answer?
Regards,
Johan Louwers.

SQL query to fetch WIP jobs agains a customer

Hi All,
Can anyone please help me with a SQL query to fetch WIP jobs agains a customer.
Regards,
Shruti

If you are using ATO functionality and if you are reserving sales orders to work orders, you can link them as follows
Using customer name, identify the open sales order headers and lines.
For each line, query reservations (mtl_reservations) using demand id fields.
For those reservations where supply = wip job, use the supply id fields and get wip_entity_id.
Using wip_entity_id, get wip_entity_name(job#) from wip_entities table.
Once a job is completed, this link is lost.
Sandeep Gandhi

Query to find the Views and synonyms that are accessing through db_link

HI all,
Oracle 10g
I need a Query to find the Views and synonyms that are accessing through db_link.
ie.
database A have the db_link to database B through a schema A
now i need to find what are the Synonyms and views that are accessing through db_link either directly or indirectly..
regards,
Deepak
Edited by: Deepak_DBA on Dec 10, 2010 5:38 PM

On the second database (B) use this query to find the SQL which used by the schema A (DB LINK USER). Check the SQL_FULLTEXT column.
select sql_fulltext,sql_id,module,parsing_schema_name,parsing_user_id,first_load_time,loads,users_executing,rows_processed,plsql_exec_time,sorts,fetches,invalidations,parse_calls,cpu_time,elapsed_time,disk_reads,buffer_gets
from V$sqlarea
where parsing_schema_name = 'A' --and to_char(first_load_time,'dd/mm/yyyy') like '%11/08/2007'
order by first_load_time desc;
Regards
Asif Kabir

SQL query to find sqlnet.ora parameters

Hi All,
I am working 11g RAC /solaris 9
I want have sql query to find values of sqlnet.ora parameters
May be values of SQLNET.INBOUND_CONNECT_TIMEOUT
SQLNET.SEND_TIMEOUT, SQLNET.RECV_TIMEOUT
Thanks
raj

The sqlnet.ora file is the profile configuration file. It resides on the client machines and the database server.
Profiles are stored and implemented using this file. The database server can be configured with access control parameters in the sqlnet.ora file.
These parameters specify whether clients are allowed or denied access based on the protocol.
The sqlnet.ora file enables you to do the following:
Specify the client domain to append to unqualified names
Prioritize naming methods
Enable logging and tracing features
Route connections through specific processes
Configure parameters for external naming
Configure Oracle Advanced Security
Use protocol-specific parameters to restrict access to the database
By default, the sqlnet.ora file is located in the ORACLE_HOME/network/admin directory. The sqlnet.ora file can also be stored in the directory specified by the TNS_ADMIN environment variable.
You can not query on this file sqlnet.ora as tnsnames.ora file.
Regards
Mahir M. Quluzade

SQL Query to Find out User has what all resources provisioned !

Hi Guys ,
Does any one have a SQL query to find out what resources are provisioned to a particular user ?
Thanks
Suren

Hi,
Hope this will help you.
SELECT distinct usr_login as "IdM User ID",
usr_employeeID as "Employee ID",
usr.USR_FIRST_NAME as "First Name",
usr.USR_LAST_NAME as "Last Name",
usr_status
as "User Status",
USR_EMP_TYPE as "Employee Type",
obj.obj_name as "Application Resource",
ost_status as "Application Resource Status",
FROM ost,oiu,obj,usr,obi
WHERE oiu.ost_key = ost.ost_key AND obj.obj_key = obi.obj_key AND oiu.usr_key = usr.usr_key
AND ost_status in ('Provisioned','Revoked','Disabled', 'Provisioning')
AND oiu.obi_key=obi.obi_key
AND usr_EmployeeID like '11111'
This query will provide all the resources to which the user is linked with and the resource status is in 'Provisioned','Revoked','Disabled', 'Provisioning' status for a particular employeed ID, I am not completely sure whether I have given the Employee ID column from USR table as correct or not. Verify once and query the DB

SQL query to find access database files?

Odd request, but does anyone have a SQL query to find files? Specifically, I am looking for machines that have access databases on them. .mdb & .accdb

Have you enabled inventory for them?
Garth Jones | My blogs: Enhansoft and
Old Blog site | Twitter:
@GarthMJ
i was trying to figure out where that option was but couldn't find it under hierarchy settings. perhaps it's been changed since 2012 R2? can you help point it out?

Sql query slowness due to rank and columns with null values:


Sql query slowness due to rank and columns with null values:
I have the following table in database with around 10 millions records:
Declaration:
create table PropertyOwners (
[Key] int not null primary key,
PropertyKey int not null,
BoughtDate DateTime,
OwnerKey int null,
GroupKey int null
go
[Key] is primary key and combination of PropertyKey, BoughtDate, OwnerKey and GroupKey is unique.
With the following index:
CREATE NONCLUSTERED INDEX [IX_PropertyOwners] ON [dbo].[PropertyOwners]
[PropertyKey] ASC,
[BoughtDate] DESC,
[OwnerKey] DESC,
[GroupKey] DESC
go
Description of the case:
For single BoughtDate one property can belong to multiple owners or single group, for single record there can either be OwnerKey or GroupKey but not both so one of them will be null for each record. I am trying to retrieve the data from the table using
following query for the OwnerKey. If there are same property rows for owners and group at the same time than the rows having OwnerKey with be preferred, that is why I am using "OwnerKey desc" in Rank function.
declare @ownerKey int = 40000
select PropertyKey, BoughtDate, OwnerKey, GroupKey
from (
select PropertyKey, BoughtDate, OwnerKey, GroupKey,
RANK() over (partition by PropertyKey order by BoughtDate desc, OwnerKey desc, GroupKey desc) as [Rank]
from PropertyOwners
) as result
where result.[Rank]=1 and result.[OwnerKey]=@ownerKey
It is taking 2-3 seconds to get the records which is too slow, similar time it is taking as I try to get the records using the GroupKey. But when I tried to get the records for the PropertyKey with the same query, it is executing in 10 milliseconds.
May be the slowness is due to as OwnerKey/GroupKey in the table can be null and sql server in unable to index it. I have also tried to use the Indexed view to pre ranked them but I can't use it in my query as Rank function is not supported in indexed
view.
Please note this table is updated once a day and using Sql Server 2008 R2. Any help will be greatly appreciated.

create table #result (PropertyKey int not null, BoughtDate datetime, OwnerKey int null, GroupKey int null, [Rank] int not null)Create index idx ON #result(OwnerKey ,rnk)
insert into #result(PropertyKey, BoughtDate, OwnerKey, GroupKey, [Rank])
select PropertyKey, BoughtDate, OwnerKey, GroupKey,
RANK() over (partition by PropertyKey order by BoughtDate desc, OwnerKey desc, GroupKey desc) as [Rank]
from PropertyOwners
go
declare @ownerKey int = 1
select PropertyKey, BoughtDate, OwnerKey, GroupKey
from #result as result
where result.[Rank]=1
and result.[OwnerKey]=@ownerKey
go
Best Regards,Uri Dimant SQL Server MVP,
http://sqlblog.com/blogs/uri_dimant/
MS SQL optimization: MS SQL Development and Optimization
MS SQL Consulting:
Large scale of database and data cleansing
Remote DBA Services:
Improves MS SQL Database Performance
SQL Server Integration Services:
Business Intelligence

Sql query to find backgorund jobs and their associated reports

Similar Messages

Maybe you are looking for