SQl query to find incompatibility defined
If two programs are defined as incompatible with one another, the data these programs cannot access simultaneously must also be identified.
This can be found from concurrent program->define from front end ebs login, but is there any SQL query to find this for a particular program or request set??
Thanks in advance.
Please search the forum before posting similar questions.
Concurrent-Conflict
Re: Concurrent-Conflict
Thanks,
Hussein
Similar Messages
-
Sql query to find the balances for a customer account wise.
Hi,
Could someone help me with the sql query to find the balances for each customer account wise. This is need to generate the report.
presently we are using this query, but the output doesnot return the expected result.
SELECT sum(nvl(ps.acctd_amount_due_remaining,0)) "Balance"
FROM ra_cust_trx_line_gl_dist_all gld,
gl_code_combinations c,
ar_payment_schedules_all ps,
RA_CUSTOMER_TRX_ALL rat,
ra_customers rc
WHERE c.CHART_OF_ACCOUNTS_ID = 101
and gld.code_combination_id = c.code_combination_id
and rat.CUSTOMER_TRX_ID=gld.CUSTOMER_TRX_ID
and rat.CUSTOMER_TRX_ID=ps.CUSTOMER_TRX_ID
and ps.customer_id=rc.customer_id
and ps.status='OP'
and ps.gl_date <= :PDATE
and ps.org_id=:PORGID
and ps.class in ('GUAR','INV','DM','DEP')
and c.SEGMENT4=:Account_id
and ps.customer_id=:Customer_id
Thanks in advance.
Kalyan.Can someone help us with this.
-
Can anybody provide the SQL query to find the files uploaded in a particular folder?
Hi All,
Can anybody provide the SQL query to find the documents (document name) uploaded in a particular folder? While clicking on folder in
GUI I'm hitting the Timeout error. I would like to find the files uploaded into this folder from SQLPLUS.
Any help is greatly appreciated.
With best regards,
NevinNevin,
Be great if we could know the version of Portal. For Rel. 1, here's the query
select id,masterthingid from wwv_things
where siteid = &site
and cornerid = &corner
&site - Content Area id
&corner - Folder id
if you don't know the folder id, use
select id from wwv_corners where siteid = &site
and name = &folder
Hope this helps. I have run into this situation before. Usually, the culprits were
one of the following:
1. Junk Characters in description of item (caused due to Copy-Paste)
2. Special Characters in the File name
Hi All,
Can anybody provide the SQL query to find the documents (document name) uploaded in a particular folder? While clicking on folder in
GUI I'm hitting the Timeout error. I would like to find the files uploaded into this folder from SQLPLUS.
Any help is greatly appreciated.
With best regards,
Nevin -
SQL Query to find menus and submenus attached to responsibility
Hi,
I am looking for help to find out a sql query to pull out the list of all the menu's associated with each of the responsibilities assigned to users. Please let me know any SQL query to find out menus attached for responsibilities assigned to users.835129 wrote:
I was asked by my lead to list out responsibilities and attached menus and I was asked to submit the output from production. In the metalink note provided by you it was asked to create table collecting all menu id's and I cannot create any tables in production. Apart from this there were 1000's of users with different responsibilities and different menus. I cannot collect all of the users menu ids.
I just want to list out responsibilities and attached menus. Is that something you can helpout withhttps://forums.oracle.com/forums/search.jspa?threadID=&q=fnd_responsibility_vl+AND+fnd_menu&objID=c3&dateRange=all&userID=&numResults=15&rankBy=10001
https://forums.oracle.com/forums/search.jspa?threadID=&q=fnd_responsibility_tl+AND+FND_MENU_ENTRIES_TL&objID=c3&dateRange=all&userID=&numResults=15&rankBy=10001
Please search the forum for these tables/views and you should get many hits:
FND_MENU_ENTRIES_TL
FND_MENU_ENTRIES_VL
FND_RESPONSIBILITY_TL
FND_RESPONSIBILITY_VL
Thanks,
Hussein -
Sql query to find all contacts for an account
I wonder if someone wrote an sql query to find all contacts for an account number in Oracle customer master. We are on EBS 11.5.10.
I am also looking for sql query to find all ship to addresses for an account number.
Thanks.Can you also post the query for people who read this post and are also looking for an answer?
Regards,
Johan Louwers. -
SQL Query to find DN and phone Load
Hi All,
We are using Call Manager 8.6 [one PUB and 4 SUBs] and have different IP phone models .
IP phone model have different LOAD working with them like few 3905 have cmterm-3905.9-2-2-0 while some have cmterm-3905.9-2-2ES7 .
Is there any way/SQL Query to find out what all phone model with DN are running 3905.9-2-2.0 LOAD?
regds,
amanHey Aman,
Hope all is well my friend!
Just to add a note to my friend Carlo's good info here (+5!)
Try;
Device> Device Settings> Firmware Load Information>Device Not Using Default Load
This will show you any phones that deviate from the "device defaults" Fimware And if you click
on any device listed here it will show the actual Firmware that is being used on the specified device.
Cheers!
Rob -
SQL query to find sqlnet.ora parameters
Hi All,
I am working 11g RAC /solaris 9
I want have sql query to find values of sqlnet.ora parameters
May be values of SQLNET.INBOUND_CONNECT_TIMEOUT
SQLNET.SEND_TIMEOUT, SQLNET.RECV_TIMEOUT
Thanks
rajThe sqlnet.ora file is the profile configuration file. It resides on the client machines and the database server.
Profiles are stored and implemented using this file. The database server can be configured with access control parameters in the sqlnet.ora file.
These parameters specify whether clients are allowed or denied access based on the protocol.
The sqlnet.ora file enables you to do the following:
Specify the client domain to append to unqualified names
Prioritize naming methods
Enable logging and tracing features
Route connections through specific processes
Configure parameters for external naming
Configure Oracle Advanced Security
Use protocol-specific parameters to restrict access to the database
By default, the sqlnet.ora file is located in the ORACLE_HOME/network/admin directory. The sqlnet.ora file can also be stored in the directory specified by the TNS_ADMIN environment variable.
You can not query on this file sqlnet.ora as tnsnames.ora file.
Regards
Mahir M. Quluzade -
SQL Query to Find out User has what all resources provisioned !
Hi Guys ,
Does any one have a SQL query to find out what resources are provisioned to a particular user ?
Thanks
SurenHi,
Hope this will help you.
SELECT distinct usr_login as "IdM User ID",
usr_employeeID as "Employee ID",
usr.USR_FIRST_NAME as "First Name",
usr.USR_LAST_NAME as "Last Name",
usr_status
as "User Status",
USR_EMP_TYPE as "Employee Type",
obj.obj_name as "Application Resource",
ost_status as "Application Resource Status",
FROM ost,oiu,obj,usr,obi
WHERE oiu.ost_key = ost.ost_key AND obj.obj_key = obi.obj_key AND oiu.usr_key = usr.usr_key
AND ost_status in ('Provisioned','Revoked','Disabled', 'Provisioning')
AND oiu.obi_key=obi.obi_key
AND usr_EmployeeID like '11111'
This query will provide all the resources to which the user is linked with and the resource status is in 'Provisioned','Revoked','Disabled', 'Provisioning' status for a particular employeed ID, I am not completely sure whether I have given the Employee ID column from USR table as correct or not. Verify once and query the DB -
SQL query to find access database files?
Odd request, but does anyone have a SQL query to find files? Specifically, I am looking for machines that have access databases on them. .mdb & .accdb
Have you enabled inventory for them?
Garth Jones | My blogs: Enhansoft and
Old Blog site | Twitter:
@GarthMJ
i was trying to figure out where that option was but couldn't find it under hierarchy settings. perhaps it's been changed since 2012 R2? can you help point it out? -
Write the sql query to find largest value in row wise without using great
write the sql query to find largest value in row wise without using
greatest fuction?Another not so good way, considering you want greatest of 4 fields from a single record:
SQL> ed
Wrote file afiedt.buf
1 with t as (Select 100 col1,200 col2,300 col3,400 col4 from dual
2 union select 500,600,700,800 from dual
3 union select 900,1000,1100,1200 from dual
4 union select 1300,1400,1500,1600 from dual
5 union select 1700,1800,1900,2000 from dual
6 union select 2100,2200,2300,2400 from dual
7 union select 2800,2700,2600,2500 from dual
8 union select 2900,3000,3100,3200 from dual)
9 SELECT (CASE WHEN col1 > col2 THEN col1 ELSE col2 END) Max_value
10 FROM
11 (SELECT (CASE WHEN col1_col2 > col2_col3 THEN col1_col2 ELSE col2_col3 END) col1,
12 (CASE WHEN col2_col3 > col3_col4 THEN col2_col3 ELSE col3_col4 END) col2,
13 (CASE WHEN col3_col4 > col4_col1 THEN col3_col4 ELSE col4_col1 END) col3
14 FROM
15 (SELECT (CASE WHEN col1 > col2 THEN col1 ELSE col2 END) col1_col2,
16 (CASE WHEN col2 > col3 THEN col2 ELSE col3 END) col2_col3,
17 (CASE WHEN col3 > col4 THEN col3 ELSE col4 END) col3_col4,
18 (CASE WHEN col4 > col1 THEN col4 ELSE col1 END) col4_col1
19* FROM t))
SQL> /
MAX_VALUE
400
800
1200
1600
2000
2400
2800
3200
8 rows selected.
SQL> Edited by: AP on Sep 21, 2010 6:29 AM -
Sql query to find answered and received calls for month or day
Hi experts !
1.Any one help in finding out the received, answered and missed ,transfered in / out calls in UCCE using SQL query for a particular month or day.
2. We have some custom report templetes defined , need to know , how can we write Sql query to get those values from custum reports.
due to some issues, cannot use webview .Hi,
there's no such thing as reporting "for a particular Team". Teams in ICM are for administration purposes only (to have grouping of agents). ICM does not count the number of calls received by "teams". If there is a report in Webview "by team", it's always by agent. Try to run the report against a team once and then try to remove certain agents from that team - you'll see the difference.
What you are looking for is either reporting by Agent or by Agent/Skill group combination.
Try to explore the
- Agent_Half_Hour
- Agent_Skill_Group_Half_Hour
- Skill_Group_Half_Hour
database views.
The database schema documents are here:
http://www.cisco.com/en/US/products/sw/custcosw/ps1844/prod_technical_reference_list.html
Good luck.
G. -
SQL Query to find Receipt No.s which are not matched to AP Invoices
Hi
Please help me to frame a query to find list of Receipt No.s which are not matched with AP Invoices.
Please refer to the below query .
SELECT
poh.segment1 "PO No.",
aps.vendor_name "Supplier Name",
pol.item_description "Item Description",
rcvh.receipt_num "GRV No.s",
rcvl.quantity_received "Quantity",
pol.unit_price "Rate/Unit",
rcvtl.tax_name||' - '||initcap(rcvtl.tax_type) "Tax",
(rcvl.quantity_received * pol.unit_price) + nvl(rcvtl.tax_amount,0) "Amount"
FROM
po_headers_all poh,
po_lines_all pol,
po_distributions_all pod,
ap_suppliers aps,
rcv_shipment_headers rcvh,
rcv_shipment_lines rcvl,
rcv_transactions rcvt,
jai_rcv_line_taxes rcvtl
WHERE
poh.po_header_id = pol.po_header_id
AND poh.po_header_id = pod.po_header_id
AND pol.po_line_id = pod.po_line_id
AND aps.vendor_id = poh.vendor_id
AND aps.vendor_id = rcvh.vendor_id
AND rcvh.shipment_header_id = rcvl.shipment_header_id
AND poh.po_header_id = rcvl.po_header_id
AND pol.po_line_id = rcvl.po_line_id
AND rcvh.shipment_header_id = rcvt.shipment_header_id
AND rcvl.shipment_line_id = rcvt.shipment_line_id
AND poh.po_header_id = rcvt.po_header_id
AND pol.po_line_id = rcvt.po_line_id
AND aps.vendor_id = rcvt.vendor_id
AND rcvh.shipment_header_id = rcvtl.shipment_header_id
AND rcvl.shipment_line_id = rcvtl.shipment_line_id
AND rcvt.transaction_id = rcvtl.transaction_id
AND aps.vendor_id = rcvtl.vendor_id
AND rcvt.transaction_type = 'RECEIVE'
AND poh.authorization_status = 'APPROVED'
AND poh.segment1 = '210001079'
I have'nt included the Invoice Tables in the above query.
Please help me in that area.
This is bit urgent.
Please help me.
Regards
Nakul VenkatramanI am using ORACLE 11gR2 If you're licensed for Diangnostics pack then you might want to look at the AWR tables, e.g. DBA_HIST_SQLSTAT and cross-reference with DBA_HIST_SNAPSHOT.
By this will i get the top 5 consumed queries of DEV user in the whole session or its just the top 5 queries at that particular time. The "executions" columns in this query, does it mean that the no. of. times the query has executed... This will get you a random 5 queries that were first parsed by DEV. Depending on your application code/structure, it may well be that all code (except for system-recursive sql) executed by DEV is parsed by DEV, and all code parsed by DEV is executed by DEV but this isn't true for all.
In terms of top N queries, you need to ORDER BY and then restrict by ROWNUM at an outer level to the ROWNUM otherwise the ROWNUM filter is applied before the ORDER BY.
i.e.
SELECT *
FROM
(SELECT ...
FROM ...
WHERE
ORDER BY...)
WHERE ROWNUM <= ....
The "executions" columns in this query, does it mean that the no. of. times the query has executedYes.
http://download.oracle.com/docs/cd/E11882_01/server.112/e25513/dynviews_3064.htm#REFRN30259
Edited by: Dom Brooks on Oct 24, 2011 9:45 AM -
Dynamic SQL Query to Find Special Characters in Table columns
Hi,
I am new to OTN FORUMS.
I am trying to find the columnsi of a table which have special characters in them.
I am planning on using this query
select ' select INSTR('||column_name||', chr(0))
from '||table_name||'where INSTR('||column_name||', chr(0)) >0' from user_tab_columns
where table_name='Account'
and spool the output to run as a script.
Is this the right way or do u suggest any modifications to the query?
Thanks in advance.Hi,
I think your basic approach is right. Since you can't hard-code the table- or column names into the query, you'll need dynamic SQL.
Instead SQL-from-SQL (that is, writing a pure SQL query, whose output is SQL code), you could do the whole job in PL/SQL, but I don't see any huge advantage either way.
When you say "Special character<b>s</b>", do you really mean "one given special character" (in this case, CHR(0))?
Will you ever want to search for multiple special characters at once?
What if table foo has a column bar, and in 1000 rows of foo, bar contains CHR (0). Do you want 1000 rows of output, each showing the exact position of the first CHR(0)? If the purpose is to look at theese rows later, shouldn't you include the primary key in the output? What if CHR(0) occurs 2 or more times in the same string?
If you'd rather have one row of output, that simply says that the column foo.bar sometimes contains a CHR(0), then you could do something like this:
SELECT 'foo', 'bar'
FROM dual
WHERE EXISTS (
SELECT NULL
FROM foo
WHERE INSTR ( bar
, CHR (0)
) > 0
); -
SQL Query to find the Delta between 2 rows
Can the below be possible? If so can you help me writing aSQL Query to do so…
I have data in spreadsheet which is pulled off from the database (data from more than one table with joins); send it to the different teams. They will check the data n update the spreadsheet if necessary and send it back to me.
I have to find the changes and update the database from the provided spreadsheet accordingly. Changes can be on different columns on each set of row.
Example:
DataFrom
ServerName
Branch_Name
Application_Name
Server Status
Application_Status
App_Environment
Tier
SQL Query
abcdef
app
adp
Deployed
Deployed
Production
silver
Excel
abcdef
app
adp
Deployed
Deployed
Development
Bronze
DataFrom
ServerName
Branch_Name
Application_Name
Server Status
Application_Status
App_Environment
Tier
SQL Query
Hijkl
app
adp
Deployed
Deployed
Production
Gold
Excel
Hijkl
app
Dep
Deployed
Deployed
Production
Gold
DataFrom
ServerName
Branch_Name
Application_Name
Server Status
Application_Status
App_Environment
Tier
SQL Query
Xzy
app
Dep
Deployed
Deployed
Production
Silver
Excel
Xzy
App
Dep
Deployed
Deployed
Development
Silver
Above scenario is an example what I am look to do with sql script? Opinions/queries accepted…
There are 1200+ rows to compare it manually which is a pain.
Thanks.Columns are different, when the contain multiple distinct values.
SELECT COUNT(DISTINCT Name) ,
COUNT(DISTINCT GroupName) ,
COUNT(*)
FROM HumanResources.Department;
Without a concise and complete example (table DDL and sample data insert statements), it's hard to tell what the correct solution could be..
DECLARE @Sample TABLE ( SetID INT, ServerID INT, ApplicationID INT );
INSERT INTO @Sample
VALUES ( 1, 1, 1 ),
( 1, 1, 1 ),
( 2, 1, 1 ),
( 2, 1, 2 ),
( 3, 1, 1 ),
( 3, 2, 1 );
WITH Evaluate AS
SELECT SetID,
COUNT(DISTINCT ServerID) AS Servers,
COUNT(DISTINCT ApplicationID) AS Applications
FROM @Sample
GROUP BY SetID
SELECT S.*,
CASE WHEN E.Servers != 1 THEN 1 ELSE 0 END AS ServersDifferent,
CASE WHEN E.Applications != 1 THEN 1 ELSE 0 END AS ApplicationsDifferent
FROM @Sample S
INNER JOIN Evaluate E ON S.SetID = E.SetID
ORDER BY S.SetID; -
SQL Query to find the Notify upon Completion employees
Hi,
I am looking for a query to find the names of the employees/users who are notified upon the completion of the Concurrent Programs. I know how to find the concurrent program details but not able to find notify upon completion employees details. Please help me.
Thanks,
KMThanks Scott for responding. There is no any custom code. Here is the navigation to reach there:
System Administrator -> Requests -> View -> Specific Requests -> Open any request ->View Details -> Options -> Notify the following people
I am looking for the query to find these notified people using SQL Query.Query FND_CONCURRENT_REQUESTS table (NOTIFY_ON_PP_ERROR column) -- http://etrm.oracle.com/pls/et1211d9/etrm_pnav.show_object?c_name=FND_CONCURRENT_REQUESTS&c_owner=APPLSYS&c_type=TABLE
Thanks,
Hussein
Maybe you are looking for
-
My iPhone 5 won't turn on and won't restart or restore... any suggestions?
-
i just bough a used iphone but looks that it was found and i cant unlock it. its still link to the last user my question is how do i find out who is the last owner so i can unlock it
-
i want to make high def. blu ray dvd's in dvd studio pro or iDVD. you can only do that in final cut pro share and that is too cheap/easy. example: adobe cs5 is compatible to make blu ray high def. dvd's on encore. i believe that there can be a resolu
-
Cannot resolve symbol: class EJBObject
Using javac I get this compile error on this file Calculator.java Calculator.java:1: cannot resolve symbol symbol : class EJBObject location: package ejb import javax.ejb.EJBObject; ^ Calculator.java:5: cannot resolve symbol symbol : class EJBObject
-
Siebel BIP Parameterized Report Date Comparison
Hello, we are working on a Siebel/BI Publisher integration and are using parameterized reports. In the parameters we would like to enter 2 dates, "From" and "To" date to receive eg all Service Requests (from an employee) in this timeframe. <?param@be