SQL Re-Write....Using Exists?

Hi Gurus, I need some help to tune the below query please. I am running it since morning and it is taking very long to return data, so i was wondering if there is a better way to write the query?
Basically, I just have to get the count of Policies in a table using:
1) A Subquery and
2) (i dont want to include some policies which meet a certain criteria)....
SELECT count( Distinct DBO.PERSONAL_AUTO_POLICY_PERIOD.PLCY_ID)
FROM DBO.PERSONAL_AUTO_POLICY_PERIOD,dbo.personal_auto_policy_trans
WHERE
dbo.personal_auto_policy_trans.PLCY_PERIOD_ID = DBO.PERSONAL_AUTO_POLICY_PERIOD.PLCY_PERIOD_ID
and
( DBO.PERSONAL_AUTO_POLICY_PERIOD.VERSION_ID =
Select max(b.VERSION_ID)
from DBO.PERSONAL_AUTO_POLICY_PERIOD b
where DBO.PERSONAL_AUTO_POLICY_PERIOD.PLCY_PERIOD_ID = b.PLCY_PERIOD_ID
and (DBO.PERSONAL_AUTO_POLICY_PERIOD.PLCY_STATUS_CD = 'A'
or b.PLCY_PERIOD_EFDT > 30 )))
and
DBO.PERSONAL_AUTO_POLICY_PERIOD.PLCY_ID
not in (
SELECT (DBO.PERSONAL_AUTO_POLICY_PERIOD.PLCY_ID)
FROM DBO.PERSONAL_AUTO_POLICY_PERIOD, dbo.personal_auto_policy_trans
WHERE
dbo.personal_auto_policy_trans.PLCY_PERIOD_ID = DBO.PERSONAL_AUTO_POLICY_PERIOD.PLCY_PERIOD_ID
and
(DBO.PERSONAL_AUTO_POLICY_PERIOD.ORIGINAL_PLCY_EFDT = DBO.PERSONAL_AUTO_POLICY_PERIOD.PLCY_EFDT)
Please Help, Any Ideas are greatly appreciated. Thanks.

I am just rewriting ur code to understand
SELECT count( Distinct DBO.PERSONAL_AUTO_POLICY_PERIOD.PLCY_ID)
FROM DBO.PERSONAL_AUTO_POLICY_PERIOD,dbo.personal_auto_policy_trans
WHERE
dbo.personal_auto_policy_trans.PLCY_PERIOD_ID = DBO.PERSONAL_AUTO_POLICY_PERIOD.PLCY_PERIOD_ID
and
( DBO.PERSONAL_AUTO_POLICY_PERIOD.VERSION_ID =
( Select max(b.VERSION_ID)
   from DBO.PERSONAL_AUTO_POLICY_PERIOD b
   where DBO.PERSONAL_AUTO_POLICY_PERIOD.PLCY_PERIOD_ID = b.PLCY_PERIOD_ID
     and (DBO.PERSONAL_AUTO_POLICY_PERIOD.PLCY_STATUS_CD = 'A'
       or b.PLCY_PERIOD_EFDT > 30 )
and
DBO.PERSONAL_AUTO_POLICY_PERIOD.PLCY_ID
not in ( SELECT (DBO.PERSONAL_AUTO_POLICY_PERIOD.PLCY_ID)
            FROM DBO.PERSONAL_AUTO_POLICY_PERIOD, dbo.personal_auto_policy_trans
            WHERE  dbo.personal_auto_policy_trans.PLCY_PERIOD_ID   =
                        DBO.PERSONAL_AUTO_POLICY_PERIOD.PLCY_PERIOD_ID
             and
                      (DBO.PERSONAL_AUTO_POLICY_PERIOD.ORIGINAL_PLCY_EFDT =  
                        DBO.PERSONAL_AUTO_POLICY_PERIOD.PLCY_EFDT)
         )Edited by: user10647455 on Jan 5, 2009 3:01 PM

Similar Messages

  • Crystal Report XI: Can you write your query in SQL instead of using the GUI

    Hello
      In crystal report version XI, can you write your query in sqlplus and then use the crystal report designer to build your report instead of using the GUI . I would like to be able to go database and show sql query and open that query and make changes directly there, is that possible on this version, if yes is there a setting somewhere? Please let me know.
    Thank you
    alpha

    Moved to Database forum.
    No you can no longer modify the SQL directly. Use a Command Object to enter the SQL directly.
    Thank you
    Don

  • Please help to re-write this query using exists or with

    Hi please help to re-write this query using exists or with, i need to write same code for 45 day , 90 days and so on but sub query condition is same for all
    SELECT SUM (DECODE (t_one_mon_c_paid_us, 0, 0, 1)) t_two_y_m_mul_ca_
    FROM (SELECT SUM (one_mon_c_paid_us) t_one_mon_c_paid_us
    FROM (
    SELECT a.individual_id individual_id,
    CASE
    WHEN NVL
    (b.ship_dt,
    TO_DATE ('05-MAY-1955')
    ) >= SYSDATE - 45
    AND a.country_cd = 'US'
    AND b.individual_id in (
    SELECT UNIQUE c.individual_id
    FROM order c
    WHERE c.prod_cd = 'A'
    AND NVL (c.last_payment_dt,
    TO_DATE ('05-MAY-1955')
    ) >= SYSDATE - 745)
    THEN 1
    ELSE 0
    END AS one_mon_c_paid_us
    FROM items b, addr a, product d
    WHERE b.prod_id = d.prod_id
    AND d.affinity_1_cd = 'ADH'
    AND b.individual_id = a.individual_id)
    GROUP BY individual_id)
    Edited by: user4522368 on Aug 23, 2010 9:11 AM

    Please try and place \ before and after you code \Could you not remove the inline column select with the following?
    SELECT a.individual_id individual_id
         ,CASE
            when b.Ship_dt is null then
              3
            WHEN b.ship_dt >= SYSDATE - 90
              3
            WHEN b.ship_dt >= SYSDATE - 45
              2
            WHEN b.ship_dt >= SYSDATE - 30
              1
          END AS one_mon_c_paid_us
    FROM  items           b
         ,addr            a
         ,product         d
         ,order           o
    WHERE b.prod_id       = d.prod_id
    AND   d.affinity_1_cd = 'ADH'
    AND   b.individual_id = a.individual_id
    AND   b.Individual_ID = o.Individual_ID
    and   o.Prod_CD       = 'A'             
    and   NVL (o.last_payment_dt,TO_DATE ('05-MAY-1955') ) >= SYSDATE - 745
    and   a.Country_CD    = 'US'

  • Use SQL to write SQL in sqldeveloepr

    Is there any slick way to use SQL to write SQL in sqldeveloper? This would involve running the output of a SQL SELECT statement, which, after all, is just sitting there in the output window, ready to execute. Or am I pretty much stuck with writing to the spool file and then executing it?

    >
    Is there any slick way to use SQL to write SQL in sqldeveloper?
    >
    No - the result just holds the results. You can copy and paste from it to a sql window and then execute it but nothing like you describe.
    >
    Or am I pretty much stuck with writing to the spool file and then executing it?
    >
    Yup!

  • How to write a SQL Query without using group by clause

    Hi,
    Can anyone help me to find out if there is a approach to build a SQL Query without using group by clause.
    Please site an example if is it so,
    Regards

    I hope this example could illuminate danepc on is problem.
    CREATE or replace TYPE MY_ARRAY AS TABLE OF INTEGER
    CREATE OR REPLACE FUNCTION GET_ARR return my_array
    as
         arr my_array;
    begin
         arr := my_array();
         for i in 1..10 loop
              arr.extend;
              arr(i) := i mod 7;
         end loop;
         return arr;
    end;
    select column_value
    from table(get_arr)
    order by column_value;
    select column_value,count(*) occurences
    from table(get_arr)
    group by column_value
    order by column_value;And the output should be something like this:
    SQL> CREATE or replace TYPE MY_ARRAY AS TABLE OF INTEGER
      2  /
    Tipo creato.
    SQL>
    SQL> CREATE OR REPLACE FUNCTION GET_ARR return my_array
      2  as
      3   arr my_array;
      4  begin
      5   arr := my_array();
      6   for i in 1..10 loop
      7    arr.extend;
      8    arr(i) := i mod 7;
      9   end loop;
    10   return arr;
    11  end;
    12  /
    Funzione creata.
    SQL>
    SQL>
    SQL> select column_value
      2  from table(get_arr)
      3  order by column_value;
    COLUMN_VALUE
               0
               1
               1
               2
               2
               3
               3
               4
               5
               6
    Selezionate 10 righe.
    SQL>
    SQL> select column_value,count(*) occurences
      2  from table(get_arr)
      3  group by column_value
      4  order by column_value;
    COLUMN_VALUE OCCURENCES
               0          1
               1          2
               2          2
               3          2
               4          1
               5          1
               6          1
    Selezionate 7 righe.
    SQL> Bye Alessandro

  • How can I load a .xlsx File into a SQL Server Table using a Foreach Loop Container in SSIS?

    I know I've REALLY struggled with this before. I just don't understand why this has to be soooooo difficult.
    I can very easily do a straight Data Pump of a .xlsX File into a SQL Server Table using a normal Excel Connection and a normal Excel Source...simply converting Unicode to DT_STR and then using an OLE DB Destination of the SQL Server Table.
    If I want to make the SSIS Package a little more flexible by allowing multiple .xlsX spreadsheets to be pumped in by using a Foreach Loop Container, the whole SSIS Package seems to go to hell in a hand basket. I simply do the following...
    Put the Data Flow Task within the Foreach Loop Container
    Add the Variable Mapping Variable User::FilePath that I defined as a Variable and a string within the FOreach Loop Container
    I change the Excel Connection and its Expression to be ExcelFilePath ==> @[User::FilePath]
    I then try and change the Excel Source and its Data Access Mode to Table Name or view name variable and provide the Variable Name User::FilePath
    And that's when I run into trouble...
    Exception from HRESULT: 0xC02020E8
    Error at Data Flow Task [Excel Source [56]]:SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occured. Error code: 0x80004005.
    Error at Data Flow Task [Excel Source [56]]: Opening a rowset for "...(the EXACT Path and .xlsx File Name)...". Check that the object exists in the database. (And I know it's there!!!)
    I don't understand by adding a Foreach Loop Container to try and make this as efficient as possible has caused such an error unless I'm overlooking something. I have even tried delaying my validations and that doesn't seem to help.
    I have looked hard in Google and even YouTube to try and find a solution for this but for the life of me I cannot seem to find anything on pumping a .xlsX file into SQL Server using a Foreach Loop Container.
    Can ANYONE please help me out here? I'm at the end of my rope trying to get this to work. I think the last time I was in this quandry, trying to pump a .xlsX File into a SQL Server Table using a Foreach Loop Container in SSIS, I actually wrote a C# Script
    to write the contents of the .xlsX File into a .csv File and then Actually used the .csv File to pump the data into a SQL Server Table.
    Thanks for your review and am hoping and praying for a reply and solution.

    Hi ITBobbyP,
    If I understand correctly, you want to load data from multiple sheets in an .xlsx file into a SQL Server table.
    If in this scenario, please refer to the following tips:
    The Foreach Loop container should be configured as shown below:
    Enumerator: Foreach ADO.NET Schema Rowset Enumerator
    Connection String: The OLE DB Connection String for the excel file.
    Schema: Tables.
    In the Variable Mapping, map the variable to Sheet_Name, and change the Index from 0 to 2.
    The connection string for Excel Connection Manager is the original one, we needn’t make any change.
    Change Table Name or View name to the variable Sheet_Name.
    If you want to load data from multiple sheets in multiple .xlsx files into a SQL Server table, please refer to following thread:
    http://stackoverflow.com/questions/7411741/how-to-loop-through-excel-files-and-load-them-into-a-database-using-ssis-package
    Thanks,
    Katherine Xiong
    Katherine Xiong
    TechNet Community Support

  • Is it possible to save / extract data from a MS SQL database 2008 using lookout 6.2?

    Is it possible to save / extract data from a MS SQL database 2008 using lookout 6.2?
      Now a days we are saving / extracting data in a excel spreadsheet, but we would like to do that using a database because it is better.

    You can use ODBC connection to work with SQL Server database.
    Use SQLExec object to execute the SQL statement. Here is a KB about the SQL statement.
    http://digital.ni.com/public.nsf/allkb/4ADEEA04CD24AE0B862565E20002A16F?OpenDocument
    To write data to spreadsheet is more straightforward because Lookout has built-in spreadsheet object. But you need to write SQL statement by yourself to interact with other database.
    To read the data back is the same way. Just use "select" SQL statement to query. You can use Datatable object to query.
    The "Data Source" can be "DSN = data source name;". The data source name is configured in Control Panel->Administrative Tools->Data Sources(ODBC).
    Ryan Shi
    National Instruments

  • Connection failed: SQLState:'01000' SQL Server Error:67 [Microsoft]ODBC SQL Server Driver][DBNETLIB]ConnectionOpen (Connect()). Connection failed: SQLState:'08001' SQL Server Error:17 [Microsoft]ODBC SQL Server Driver][DBNETLIB]SQL Server does not exist o

    Help,
    setup a new sql server 2012 on a windows 2012r2 server to replace old sql server 2005 on an old windows server 2003 machine.  When i test the ODBC connection locally on the server it works fine, however when i try to connect via windows 7 client machine
    i get the following error:
    Connection failed:
    SQLState:'01000'
    SQL Server Error:67
    [Microsoft]ODBC SQL Server Driver][DBNETLIB]ConnectionOpen
    (Connect()).
    Connection failed:
    SQLState:'08001'
    SQL Server Error:17
    [Microsoft]ODBC SQL Server Driver][DBNETLIB]SQL Server does not exist or access denied
    I think it must be a permissions thing, I've turned off the firewall for now and still no difference, 've also made sure remote connection is enabled.  I can connect to the other sql server in studio manager on the new machine however, i can't go do
    the same in the old server, says:
    cannot connect to hbfsqlpro1\hbfsqlpro1
    Additonal information a network related or instance specifc error occured while establising a connection to SQL server.  The server was not found or was not accessible.  Verify that the instance name is correct and that SQL server is configured to
    allow remote connections. (provider:SQL Network Interfaces, error 26 - error locationg server/instance specified) (Microsoft SQL server)
    the instance is def correct, as that is what i use to connect locally on the new machine and what it comes up on the studio manager on the new machine.  STarting to pull my hair out somewhat, i'm sure it's something really simple! 

    Hello,
    You are trying to connect to a named instance. Make sure the SQL Server Browser service is started on the SQL Server computer.
    Make sure TCP/IP is enabled.
    http://msdn.microsoft.com/en-us/library/ms191294(v=sql.110).aspx
    Try to disable Windows Firewall or security software on both, SQL Server instance and client computer.
    Test basic connectivity too. Try to ping from the client computer to the SQL Server computer.
    Hope this helps.
    Regards,
    Alberto Morillo
    SQLCoffee.com

  • Can't Create a Data Source - Failed to test connection. [DBNETLIB][ConnectionOpen (Connect()).]SQL Server does not exist or access denied

    Hi there,
    I am having a serious issue with The Power BI Data Management Gateway which I am hoping that someone can help me with.
    Basically I am setting a connection between a Power BI demo site and a SQL 2012 Database based on Azure. The Data Management Gateway and is up and running, and Power BI has managed to connect to it successfuly.
    By following the tutorials at
    here I was able to successful create my Data Connection Gateway with a self-signed certificate.
    However, when trying to create the data source I come into problems. The Data Source Manager manages to successfully resolve the hostname, as per the screenshot below:
    Bear in mind that I exposed the require ports in Azure as endpoints and I managed to modify my hosts file on my local machine so I could access the SQL server hosted in Azure using its internal name -- otherwise I would not be able to get this far.
    However the creation of the data source also fails when trying to created it whilst logged in the SQL server in question:
    The Data Source Manager returns the error when using the Microsoft OLE DB Provider for SQL Server:
    Failed to test connection. [DBNETLIB][ConnectionOpen (Connect()).]SQL Server does not exist or access denied
    I tried using the SQL Server Native Client 11.0 instead but I also get an error. This time the error is:
    Failed to test connection. Login timeout expiredA network-related or instance-specific error has occurred while establishing a connection to SQL Server. Server is not found or not accessible. Check if instance name is correct and if SQL Server is configured to allow remote connections. For more information see SQL Server Books Online.Named Pipes Provider: Could not open a connection to SQL Server [53]. 
    Some considerations
    If I provide an invalid username/password, the Data Source Manager does say that the username and password is incorrect.
    Firewall is turned off in the SQL Server (either way, this error also happens if I try top use the Data Source Manager whilst logged in the SQL Server itself).
    SQL Profiler does not show any attempt of connection.
    The SQL server instance in question is the default one.
    The error happens regardless if I select the option to encrypt connection or not.
    In SQL Configuration manager I can see that all protocols are enabled (TCP/IP, Named Pipes and Shared Memory.
    The Event Viewer does not provide any further errors than the one I have copied in this post.
    I'm at a loss here. Could someone please advise what might I be doing wrong?
    Regards,
    P.

    Here is what I had to do to solve this issue:
    Basically I had to add the MSSQL TCP/IP port as an end-point in Azure. After I did that, then I was able to create the data-source. However, I was only able to authenticate with a SQL account, as any domain account would return me an error saying that the
    domain isn't trusted.
    What puzzles me here is how come the Data Source Manager would inform me that an account username/password was invalid, but it would fail/timeout if I provided valid credentials (!?!?!!?)

  • How to write customer exist for Keyfigure( query )

    Hi gurus,
    I have to write customer exist for a key figure.
    Please tell me how to write it.
    Thanks,
    James

    Pankesh,
    SE24 is for  defining classes .. are you sure this is for customer exits ?..
    Use a formula variable filled by a customer exit... go to TCode CMOD and follow the normal procedure for defining Exits.. look up the forums for detailed steps on how to write an exit..
    Arun
    Hope it helps...

  • [Microsoft][ODBC SQL Server Driver][DBNETLIB]SQL Server does not exist or access denied.

    Hi, I've seen questions about this error posted elsewhere but I'm not sure if the same issues applied.
    I'm trying to connect to SQL Server from a VBA macro in excel. I've managed to do this with the code below where my query is return to cells in my active worksheet but for another query I want to run the data to be return is too large for Excel to handle
    and so I'd like to save it as a .csv file but using the second example of my code I get the message "[Microsoft][ODBC SQL Server Driver][DBNETLIB]SQL Server does not exist or access denied". Since I have access to this database from the first example
    of the code, I assume my conn.ConnectionString line of code is letting me down.
    Can anyone help me please?
    'Code to return data to worksheet'
    Sub macro2()
    With ActiveSheet.ListObjects.Add(SourceType:=0, Source:=Array(Array( _
            "ODBC;DSN=SQLRA - OPENBET;UID=user1;Trusted_Connection=Yes;APP=Microsoft Office 2013;WSID=pdfdf3001;DATABASE=open;Network=DBMSS" _
            ), Array("OCN;Address=SQLRA_DB,55455;ApplicationIntent=READONLY;")), _
            Destination:=Range("$BG$1")).QueryTable
            .CommandText = Array( _
            "select  A.ev_oc_id, B.ev_mkt_id, A.ev_id, D.start_Time, Upper(Replace(A.[desc],'|','')) , A.result, COALESCE(A.sp_num, A.lp_num) , ", _
            "COALESCE(A.sp_Den, A.lp_Den) from open.reporting.tevoc A, open.reporting.tevmkt B, open.reporting.tevocgrp C, open.reporting.tev D ", _
            "where  A.ev_mkt_id = B.ev_mkt_id and B.ev_oc_grp_id = C.ev_oc_grp_id and D.ev_id = A.ev_id and Upper(Replace(D.[desc],'|','')) = 'home' and upper(B.name) = '|today|' and D.ev_type_id in (264, 289) and D.ev_class_id = 49
    and D.start>= '" & Year & "-" & Month & "-" & Day & "'" _
            .RowNumbers = False
            .FillAdjacentFormulas = False
            .PreserveFormatting = True
            .RefreshOnFileOpen = True
            .BackgroundQuery = True
            .RefreshStyle = xlInsertDeleteCells
            .SavePassword = False
            .SaveData = True
            .AdjustColumnWidth = True
            .RefreshPeriod = 0
            .PreserveColumnInfo = True
            .ListObject.DisplayName = "Table_Query_from_SQLRA___OPEN_1"
            .Refresh BackgroundQuery:=False
        End With
    End Sub
    'Code that produces error'
    Sub macro1()
    Dim conn As ADODB.Connection
    Set conn = New ADODB.Connection
    Dim testSQL As String
    Dim qd As DAO.QueryDef
    Dim openbetdb As Database
        conn.ConnectionString = "driver={SQL Server}; server= sqlra_db;uid=user1;APP=Microsoft Office 2013;WSID=pdfdf3001;database=openbet"
        conn.Open
        testSQL = "SELECT * FROM open.reporting.TevType where ev_class_id = 49 and ev_type_id in(289,330,518,13492);"
        Set qd = Db.CreateQueryDef("tmpExport", testSQL)
        DoCmd.TransferText acExportDelim, , "tmpExport", "C:\\export.csv"
    End Sub

    Hello,
    Are you connect to remote SQL Server? If so,
    please make sure the target SQL Server is running and is listening on appropriate protocols. Please take a look at the following article about general steps to troubleshoot
    SQL connectivity issues:
    http://blogs.msdn.com/b/sql_protocols/archive/2008/04/30/steps-to-troubleshoot-connectivity-issues.aspx
    Regards,
    Elvis Long
    TechNet Community Support

  • Reading BLOB from SQL Server 2005 using DB Link from Oracle 10g

    Hi All,
    I am trying to read a table's data from SQL Server 2005 using ODBC DB Link created in Oracle 10g (10.2.0.3/4) database. I am not using oracle gateway.
    I am able read all data except for the BLOB data from SQL server 2005. It gives error given below when I try to execute query SELECT * from T_TRANSACTION_DATA@sdeslink inside a stored procedure:
    ORA-22992: cannot use LOB locators selected from remote tables
    Kindly help how to read BLOB from SQL server 2005 inside Oracle 10g.
    Best Regards!
    Irfan

    Irfan,
    If you can read the blob data using 10.2 HSODBC then there should be no problem using the 11g gateway.
    I recommend you download the latest version which is 11.2.0.3 available from My oracle Support as -
    Patch 10404530: 11.2.0.3.0 PATCH SET FOR ORACLE DATABASE SERVER
    This is a full version and does not need a previous version to have bene installed. When installing it needs to be in a completlely separate ORACLE_HOME from the existing 11.2 install.
    For the Ora-22992 problem have a look at this note in My Oracle Support -
    Ora-22992 has a workaround in 10gR2 (Doc ID 436707.1)
    Regards,
    Mike

  • [DBNETLIB][ConnectionOpen (Connect()).]SQL Server does not exist or access denied.

    I using SQL 2000 on Server 2012 in named instance. when i connect locally, it's ok, but when try to connect from network it generates error [DBNETLIB][ConnectionOpen (Connect()).]SQL Server does not exist or access denied.

    Hi Sayed Abdul Latif,
    As other post, SQL Server 2000 was out of support since April,2013. You can try to install SQL Server 2005 or later version. In addition, since the issue regards SQL Server Data Access. I will help you post the question in the related forums. It is appropriate
    and more experts will assist you.
    According to your description, you can only connect to SQL Server locally, I recommend you check if the TCP/IP and Named Pipes are enabled in SQL Server Configuration Manager. And the SQL Server is set to allow remote connection. Then restart the SQL Service
    and check if you can connect to SQL Server remotely.
    Additionally, we also need to verify if the SQL Server named instance is in a cluster, and connect to it by using the "servername\instancename" syntax, then you receive the above error message. If yes, you have to hardcode the TCP port or the Named Pipe
    of the SQL Server named instance. For more information, you can review the following article.http://support.microsoft.com/kb/888228/en-us
    Thanks,
    Sofiya Li
    Sofiya Li
    TechNet Community Support

  • Sql server does not exist or access is denied.

    Hi,
    i am trying to connect a dadabase to the server from client pc. and i take the sql error  [DBNETLIB][ConnectionOpen (Connect()).]SQL Server does not exist or access denied to the client pc.
    i using .udl file and ia trying to connect with sql authentication.
    please advice.

    the clients computers are in the workgroup network.
    Hi Antonia,
    Please ensure you specify the correct server name, and check SQL Serer instance was started.
    A good article about UDL connect to SQL DB for your reference, please see:
    Quick Database Connectivity Testing:
    http://sqlblog.com/blogs/andy_leonard/archive/2011/08/26/quick-database-connectivity-testing.aspx
    In addition, this issue also might be caused by the windows fire setting. Please also take a look at the following article regarding configure the Windows Firewall to allow SQL Server Access:
    http://technet.microsoft.com/en-us/library/cc646023(v=sql.110).aspx
    Reards,
    Elvis Long
    TechNet Community Support

  • SQL Server does not exist or access denied - periodic error

    Hi There,
    For the last week or so, I have been getting periodic errors on my sites powered by MSSQL databases. The error message is as follows:
    Microsoft OLE DB Provider for SQL Server error '80004005'
    [DBNETLIB][ConnectionOpen (Connect()).]SQL Server does not exist or access denied.
    Usually, a quick refresh, and everything works fine again.
    My host doesn't know what has caused the issue, but has dug up this microsoft link: http://support.microsoft.com/kb/907264
    Most of that tech speak is beyond me! I use Dreamweaver - does anybody know if the standard dreamweaver connections or cursors contravene the advice on that page, and if so how to fix it?
    If not, does anybody know where to look to solve this issue?
    Thanks,
    Dan 

    I had this same problem and on a hunch I deleted the brackets
    so that the connection string instead of being,
    "Persist Security Info=False;Data
    Source=[THESERVER\SQLEXPRESS];Initial Catalog=[AdventureWorks];User
    ID=[ATEST];Password=[kjdkjdkjd]"
    is now,
    "Persist Security Info=False;Data
    Source=THESERVER\SQLEXPRESS;Initial Catalog=AdventureWorks;User
    ID=ATEST;Password=kjdkjdkjd"
    This was in Dreamweaver 8.

  • OLE DB or ODBC error: [DBNETLIB][ConnectionOpen (Connect()).]SQL Server does not exist or access denied

    Hi,
    I have one client and one server.  In both hosts I created an OS-user named User1.
    The user have been given various role under the prefix SQLServer2005.
    The default instance of SQL Server and instance (background-process) of
    Analysis Service are also run under User1.
    I connected via Management Studio to Analysis Service directly in the
    server.  I set the permission to access Analysis Service to Everyone. 
    This means everyone should be able to use Analysis Service.  I have set
    ODBC data source to the server.  Testing was successful.
    I created a project to create a cube.  The tables are fairly small (total 300 MB, biggest one 290).
    On project setting (created at client) I set the server host as
    deployment target. I managed to deploy project when all I have are Data
    Source and Data Source Views.
    But on deployment I always failed.   The errors remain the same, begins with
    OLE DB error: OLE DB or ODBC error: [DBNETLIB][ConnectionOpen (Connect()).]SQL Server does not exist or access denied.; 08001.
    I have tried 4 combinations of Impersonation :
    (A) Use a specific username and password
      * in which I supply User1 and the password of User1
    (B) Use the service account
    (C) Use the credentials of the current user
    (D) Default
    Why is this? The server does certainly exist.  I think the error message is wrong.
    I have seen 3 posting that seems related.  One of them say the solution is giving the right impersonation, but gave no detail.  About the privilege, User1 are granted the role of
    SQLServer2005MSOLAP.  What is the solution?
    Thank you,
    Bernaridho

    I just had this problem and solved it by creating an alias in SQL Server Configuration Manager, as below:
    Scenario: My SQL server is accessible from the internet under my.domain.com, and from itself at ServerName. But the local network can't see itself through the router at my.domain.com, so the deployed project is unable to process the cube, since that would
    require Analysis Services to be able to see the SQL Server at my.domain.com, which it can't do.
    So I changed the server in my project from my.domain.com to ServerName, and I created a local alias to ServerName in SQL Server Configuration Manager, under SQL Native Client 11.0 Configuration, Aliases. In my case, I pointed it to localhost port 1333, and
    used SSH -L 1333:my.domain.com:1433, but I could have pointed the alias directly to the server, just as well. (Verifying... yes, that worked too, so you can forget SSH if you have no interest in it.)

Maybe you are looking for

  • When iPhone is on Cellular data and WiFi, i cannot make calls and phone goes out of service.

    So I have this iPhone 5S unlocked version from the US which I am using in India. When I am connected to my office wireless and also the cellular & 3G data are switched on, my phone goes out of service and I cannot make calls. I can also use internet.

  • How to change the font in the code view

    I want change the font size and style that shows when I'm in code view. For the life of me, I can't find where to do this. Can someone help me?

  • Unwanted life feed.

    GDM00106  H1CLAIM DATA                    0000013 GDM00106  D1E06  30736130 01EAW GDM00106  D1E06  30736130 01HAMMBJNK7405D061583 060823020228 050630 GDM00106  D1E06  30736130 01HB4241611446 GDM00106  D1E06  30736130 01LA42426110010004735 GDM00106  D

  • Can not add nokia 6670 to isync after 10.4.7

    with 10.4.6 it worked. Pairing no problem and also Adressbook was accessible. In 10.4.7 I can pair the phone with the mac, but only isync and internet acces are mentioned in the bluetoothe connection assistent. when I open isync and trying to add a n

  • GR/IR AMOUNT DIFFERENCE IN QTY

    Hi gurus,           This po qty 3.360 m3                  distribution proportionally to acc assignment 3.359 m3                  in po history tab it is displaying 3.360 m3                  in IR its displaying 3.359 m3 can any one pls tell me why i