SQL Server 2000 auditing on DML changes on user tables to user databases

Please let me know if you know if there is any procedure or steps to determine DML changes on user tables in database.

Hello,
You can use triggers as shown in the following article:
http://sqlserver2000.databases.aspfaq.com/how-do-i-audit-changes-to-sql-server-data.html
You may also consider third party tools that may still support SQL Server 2000. The following tool supported SQL Server 2000 a few years
ago, not sure about today:
http://www.apexsql.com/sql_tools_comply.aspx
Server side traces may be another option:
http://msdn.microsoft.com/en-us/library/cc293613.aspx
Hope this helps.
Regards,
Alberto Morillo
SQLCoffee.com

Similar Messages

  • SQL Server 2000 auditing/tracking DML changes on specific tables.

    Hello,
    We would like to audit/track all DML activities on couple of tables which reside on SQL Server 2000. Triggers are an option we think but thought that would impact performance because of activity on those tables. Could someone please suggest any other best
    options that are possible with SQL Server 2000 to capture these changes.
    Thanks,

    Hello,
    You may consider third party tools that may still support SQL Server 2000. The following tool supported SQL Server 2000 a few years
    ago, not sure about today:
    http://www.apexsql.com/sql_tools_comply.aspx
    Server side traces may be another option:
    http://msdn.microsoft.com/en-us/library/cc293613.aspx
    Hope this helps.
    Regards,
    Alberto Morillo
    SQLCoffee.com

  • Transactions in MS SQL server 2000

    I'm writing an application whish will real data from MS SQL server 2000. At the same time one table and/or database would be used with couple of users. What should I use for handling transactions?
    I'm using jtds-0.8-rc1 as JDBC driver.
    Thanks in advance.

    I'm writing an application whish will real data from
    MS SQL server 2000. At the same time one table and/or
    database would be used with couple of users. What
    should I use for handling transactions?
    I'm using jtds-0.8-rc1 as JDBC driver.
    Thanks in advance.Are you saying you will only have one database? Are your sql statements atomic? If they are just use sql server and JDBC with autocommit on. If not, you can still just use sql server and jdbc and turn autocommit off, and explicitly control the transactions yourself. If your app is a web application, you can probably use the web container to control the transactions.
    If you are going to have more than one database, or a database and another datasource, then you'll have to look at a transaction manager or application server. If you do, you'll have to have the Microsoft Distributed Transaction Coordinator running as well.

  • When a database is last used in SQL Server 2000.

    Hi,
    Need to create one script by which I can get my any of the database lastly used, which is running on SQL Server 2000 lastly used.
    Lets say if I have 100 databases running on SQL Server 2000, then using one query I can get all the databases last access date.
    I dont want to implement audits because that will give only the result after audit setup.
    Thanks In Advance
    Regards, Ashish Tripathi

    Agree with Erland.
    There is no "column" in sys.databases till now. I would suggest you to vote for this feature.
    https://connect.microsoft.com/SQLServer/feedback/details/659846/database-last-accessed-time
    Balmukund Lakhani
    Please mark solved if I've answered your question, vote for it as helpful to help other users find a solution quicker
    This posting is provided "AS IS" with no warranties, and confers no rights.
    My Blog |
    Team Blog | @Twitter
    | Facebook
    Author: SQL Server 2012 AlwaysOn -
    Paperback, Kindle

  • Chinese character displaying as ???? in excel  while importing data from sql-server 2000

    Hi everyone,
    I am facing a problem while importing sql-server 2000 data in
    excelshhet .There is some chinese character in database table.
    After importing data in excel chinese character looks like
    ????????.In sql-server this chinese character looks like square
    field.
    I am using UTF-8 .
    This is last hope.
    vijay k singh
    Text

    I was having the same problem with the AIRSQL i couldn't find how to rencode my csv file...
    So i resave the csv in xls and then chose the utf-8 thingy and then just changed the extension back to csv.
    i was always wondering why i had an xls file in my source code, which was just left there from the previous reencoding, i guess
    hope it helps

  • MS SQL Server 2000 Service Pack 4 upgrade

    Hi,
    I need to upgrade my actual SAP DataBase SQL Server 2000 from Service Pack 2 to Service Pack 4 in order to be more secure as a MS consultant is requesting, but following the comments on the SAP note 1026116 attached file, which references this MS article:
    http://download.microsoft.com/download/1/B/D/1BDF5B78-584E-4DE0-B36F-C44E06B0D2A3/ReadmeSql2k32sp4.htm
    Referenced Text:
    "If your instance of SQL Server 2000 is being used by an application, first check with the provider of the application whether there are any SQL Server 2000 upgrade considerations specific to that application. "
    So following this instructions is there any SQL Server 2000 upgrade to Service Pack 4 considerations for a SAP Database of an ERP R3 ECC 6.0.
    Could anyone can help me please with this question?
    Best Regards,
    Erik Espinosa

    Hi,
    Service Pack 4 is supported and recommended for SAP ERP ECC 6.0. There are currently no known issues with upgrading to this service pack. The mentioned collation change don't have to be performed as long as you are not planning to upgrade to SQL Server 2005.
    Best regards
      Clas

  • Junk charecter in SQL Server 2000 varchar

    Hi all,
    My application works with both SQL Server as well as Oracle.For SQL Server 2000 to create primary key in to one table i am using UuidCreate() function which returns unique key of length 32.But in case of SQL Server 2000, it some times accepts junk charecters. For Oracle database with this function i am not gettng any error,But SQL Server sometime accepts junk charecter.The data type used for that column is varchar.Can you please suggest me the root cause of it and solution for it.
    Thanks in advance,
    Anjela

    Are you doing that in a SAP application or in a self written one? In the latter case this is the wrong forum...
    Markus

  • Problem with NW04s SR2 installation with MS SQL Server 2000 SP4

    I’m struggling with the NW04s installation with MS SQL Server 2000.
    The installation stops at the step “Create/modify database schema SAPJ2EDB”.
    The following error/info from log file,
    INFO       2007-06-06 12:02:33 [iaxxgenimp.cpp:632]
               showDialog()
    Execute step doConfiguration of component |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_CreateDB|ind|ind|ind|ind|0|0|NW_MSS_DB|ind|ind|ind|ind|2|0|NW_MSS_SRVCFG|ind|ind|ind|ind|6|0.
    INFO       2007-06-06 12:02:35 [iaxxgenimp.cpp:632]
               showDialog()
    Execute step doTempdb of component |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_CreateDB|ind|ind|ind|ind|0|0|NW_MSS_DB|ind|ind|ind|ind|2|0|MssDowntimeConfig|ind|ind|ind|ind|7|0.
    INFO       2007-06-06 12:02:36 [iaxxgenimp.cpp:632]
               showDialog()
    Execute step doSwitch of component |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_CreateDB|ind|ind|ind|ind|0|0|NW_MSS_DB|ind|ind|ind|ind|2|0|MssDowntimeConfig|ind|ind|ind|ind|7|0.
    INFO       2007-06-06 12:02:36 [iaxxgenimp.cpp:632]
               showDialog()
    Execute step doTempDBAnalyze of component |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_CreateDB|ind|ind|ind|ind|0|0|NW_MSS_DB|ind|ind|ind|ind|2|0|MssDowntimeConfig|ind|ind|ind|ind|7|0.
    INFO       2007-06-06 12:02:37 [iaxxgenimp.cpp:632]
               showDialog()
    Execute step doTempDBBeforeRestart of component |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_CreateDB|ind|ind|ind|ind|0|0|NW_MSS_DB|ind|ind|ind|ind|2|0|MssDowntimeConfig|ind|ind|ind|ind|7|0.
    INFO       2007-06-06 12:02:38 [iaxxgenimp.cpp:632]
               showDialog()
    Execute step doRestartServer of component |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_CreateDB|ind|ind|ind|ind|0|0|NW_MSS_DB|ind|ind|ind|ind|2|0|MssDowntimeConfig|ind|ind|ind|ind|7|0.
    INFO       2007-06-06 12:02:58 [ianxbservi.cpp:697]
               CIaNtServices::stop(const map<iastring,iastring>&)
    The service 'MSSQLSERVER' stopped successfully on host 'GBCZ672C'.
    INFO       2007-06-06 12:03:10 [ianxbservi.cpp:632]
               CIaNtServices::start(const map<iastring,iastring>&)
    The service 'MSSQLSERVER' started successfully on host 'GBCZ672C'.
    INFO       2007-06-06 12:03:21 [ianxbservi.cpp:632]
               CIaNtServices::start(const map<iastring,iastring>&)
    The service 'SQLSERVERAGENT' started successfully on host 'GBCZ672C'.
    INFO       2007-06-06 12:03:21 [iaxxgenimp.cpp:632]
               showDialog()
    Execute step doTempDBAfterRestart of component |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_CreateDB|ind|ind|ind|ind|0|0|NW_MSS_DB|ind|ind|ind|ind|2|0|MssDowntimeConfig|ind|ind|ind|ind|7|0.
    INFO       2007-06-06 12:03:22 [iaxxgenimp.cpp:632]
               showDialog()
    Execute step doChangeTempSetNewSize of component |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_CreateDB|ind|ind|ind|ind|0|0|NW_MSS_DB|ind|ind|ind|ind|2|0|MssDowntimeConfig|ind|ind|ind|ind|7|0.
    INFO       2007-06-06 12:03:39 [iaxxgenimp.cpp:632]
               showDialog()
    Execute step CheckParameters of component |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_CreateDB|ind|ind|ind|ind|0|0|NW_MSS_DB|ind|ind|ind|ind|2|0|MssSchemaCreate|ind|ind|ind|ind|9|0.
    INFO       2007-06-06 12:03:39 [iaxxgenimp.cpp:632]
               showDialog()
    Execute step CreateDirectories of component |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_CreateDB|ind|ind|ind|ind|0|0|NW_MSS_DB|ind|ind|ind|ind|2|0|MssSchemaCreate|ind|ind|ind|ind|9|0.
    INFO       2007-06-06 12:03:40 [iaxxgenimp.cpp:632]
               showDialog()
    Execute step CreateDatabase of component |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_CreateDB|ind|ind|ind|ind|0|0|NW_MSS_DB|ind|ind|ind|ind|2|0|MssSchemaCreate|ind|ind|ind|ind|9|0.
    ERROR      2007-06-06 12:03:40 [iaxxgenimp.cpp:731]
               showDialog()
    FCO-00011  The step CreateDatabase with step key |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_CreateDB|ind|ind|ind|ind|0|0|NW_MSS_DB|ind|ind|ind|ind|2|0|MssSchemaCreate|ind|ind|ind|ind|9|0|CreateDatabase was executed with status ERROR .
    ERROR      2007-06-06 12:03:40
               lib=iamodmssql module=CIaNtMssDmo
    MDB-05053  Errors when executing sql command: <p nr="0"/> If this message is displayed as a warning - it can be ignored. If this is an error - call your SAP support.
    INFO       2007-06-06 12:04:04 [iaxxgenimp.cpp:774]
               showDialog()
    An error occured and the user decided to retry the current step: "|NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_CreateDB|ind|ind|ind|ind|0|0|NW_MSS_DB|ind|ind|ind|ind|2|0|MssSchemaCreate|ind|ind|ind|ind|9|0|CreateDatabase".
    ERROR      2007-06-06 12:04:05 [iaxxgenimp.cpp:731]
               showDialog()
    FCO-00011  The step CreateDatabase with step key |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_CreateDB|ind|ind|ind|ind|0|0|NW_MSS_DB|ind|ind|ind|ind|2|0|MssSchemaCreate|ind|ind|ind|ind|9|0|CreateDatabase was executed with status ERROR .
    Please let me know if you can help or if there is any other way around.
    Many Thanks in advance.
    Ritin Jain

    Hi All,
    I was not able to solve the problem with MS SQL 2000, but I was able to resolve the issue with MS SQL 2005.
    You have to chhose the following settings while instalation,
    Service Account - Select one of the following options:
    1) Use the built-in System account for each service and choose Local system or Network Service.
    2) Use a domain user account, and enter the user name and password.
    Under Start services at the end of setup make sure that SQL Server and SQL Server Agent are selected.
    Authentication Mode      
    1) Select Mixed Mode (Windows Authentication and SQL Server Authentication).
    This mode is required for a Java or ABAP+Java system.
    If you choose this mode, you have to set the password for the sa login.
    Note: The password for the sa login must comply with the Windows password policy.
    Collation Settings      
    1) Select SQL collations (used for compatibility with previous versions of SQL Server).
    2) From the drop-down list select Binary order based on code point comparison, for use with the 850 (Multilingual) Character Set.
    I hope this helps!

  • MS SQL Server 2000 connectivity problems

    Hello everyone,
    I'm having problems connecting my application to MS SQL Server 2000. I am making a desktop application that is going to read and update a database I have created in MS SQL Server 2000. The problem is I cannot connect to the database from the application. Here are the details:
    I have only created a GUI for one table so far. I have created one other class that is used for connecting to the database.
    The GUI class is called Products.java and I have created it in Netbeans. The other class is called ConnectClass.java. In the constructor of the Products.java (GUI class), I instantiate an object of ConnectClass. That object in turn tries to establish a connection to the database. Here is the code of the constructor of the Products.java class (GUI class).
    public class Products extends javax.swing.JFrame {
    private ConnectClass connect1; // declaring the reference variable for ConnectClass
    /** Creates new form Products */
    public Products() {
    initComponents();
    connect1 = new ConnectClass(); // instantiating the ConnectClass
    The code of ConnectClass.java is as follows:
    import java.sql.*;
    public class ConnectClass {
    Connection connection;
    Statement statement;
    public ConnectClass()
    try
    Class.forName("com.microsoft.jdbc.sqlserver.SQLServerDriver");
    connection = DriverManager.getConnection("jdbc:microsoft:sqlserver://localhost:1433;DatabaseName=assignment2;User=root;Password=sa");
    statement = connection.createStatement();
    catch(SQLException sqle)
    System.err.println("Error creating connection");
    catch(ClassNotFoundException cnfe)
    System.err.println(cnfe.toString());
    When I run the application I expect that the database should be connected at least. However I get the following message in Netbeans output window:
    run:
    java.lang.ClassNotFoundException: com.microsoft.jdbc.sqlserver.SQLServerDriver
    BUILD SUCCESSFUL (total time: 6 seconds)
    I am using Windows XP Home Edition SP3
    The JDBC driver I am using is: Microsoft® SQL Server® 2000 Driver for JDBC™ Service Pack 3
    The name of the database I have created in MS SQL Server 2000 is: assignment2
    I have given the following settings in the CLASSPATH environment variable: .;c:\program files\Microsoft SQL Server 2000 Driver for JDBC\lib\msbase.jar;c:\program files\Microsoft SQL Server 2000 Driver for JDBC\lib\msutil.jar;c:\program files\Microsoft SQL Server 2000 Driver for JDBC\lib\mssqlserver.jar
    I don't know what is wrong. Any help would be GREATLY appreciated. If you want to know something more please ask me.
    Regards

    Ace1111111 wrote:
    Thanks for the answers. I put the jar file in the jdk/jre/lib/ext folderWhich is exactly what you should not do. That folder is for language extensions, which a Driver is not. Why does everybody find it so hard to take the time to learn the language basics?
    and the driver was finally detected but then the program would not connect to the database.Did you configure the server properly. Per default it is not configured to accept network connections.
    I tried jtds driver too. I was so frustrated that I installed MySQL instead. Put the jar file in jre/lib/ext folder and then gave the URL and to my relief the database connected. Maybe there are some settings that need to be configured in MS SQL before it can connect. But I could not get it to connect :(The manual would contain that info, btw.

  • Collation change in MS SQL SERVER 2000

    As i have installed sqlserver 2000 with default collation SQL_Latin1_general_CP1_CI_AS, Now i am unable to continue ECC5.0 IDES Installation which  requires  the collation SQL_Latin_General_c850_BIN2. Please let me know how to change default collation to BIN2  in  sqlserver 2000. I have  seen note 600027 which seems to be not clear.
    thanks
    balan

    Hi Chidam,
    you have to distinguish between the server collation and the database collation. In your case, as far as I can tell, you have to uninstall SQL Server 2000 and install it again with the right collation (Binary order for use with the 850 Multilingual Character Set).
    Please also refer to note 505906 which describes your scenario.
    Regards,
    Sven

  • Changes required to switch from SQL Server 2000 to SQL Server 2005?

    I'm converting a legacy app from SQL Server 2000 to SQL Server 2005.  The app is written in VB6 and utilizes CR 8 OCX.  When I invoke a report from VB I'm getting Error# 20599 Cannot open SQL server.  I redefined the ODBC DSN specifying Windows Authentication, and the SQL Server instance supports mixed mode.
    Searching for the error, I found an article that suggests I need p2sodbc8.zip, but I can't find a link to it in the Downloads area.
    Would greatly appreciate any help at all - including a link to p2sodbc8.zip if that's the likely resolution.
    Thanks in advance,
    Pete

    Hi Peter,
    As you are having issue with SDK's.
    I would suggest you to post your question in
    Business Objects SDK Application Development » [Legacy Application Development SDKs|;
    That forum is monitored by qualified technicians and you will get a faster response there. Also, all  SDK queries remain in one place and thus can be easily searched in one place.
    Thank you for your understanding,
    Shweta

  • Exceptions thrown while importing tables from SQL Server 2000

    Hi all,
    <MyProblem:
    I cannot import the tables defined in my local SQL Server. An exception is thrown --oracle.jdeveloper.cm.ds.db.ValidationException: Columns of type varchar cannot have a size specified.
    />
    <What I have done:
    In Oracle JDev 10g, Created a new DB connection called "SQLServerConnection" to connect to the SQL Server and it works fine. I am able to see all tables by expanding the connection.
    During the creation of a new partner link named "DBAdapter", I use the adapter wizard to select DB Adapter and then select the "SQLServerConnection" DB connection I have created. I select Perform an Operation on a Table and then check Select. After I pressed OK button on the[i] Import Tables  dialog, a Error messege box emmerged indicating the Exception: Columns of type varchar cannot have a size specified.
    I try to change the data type of the columns of the tables to char, there is still similar exception (Columns of type char cannot have a size specified).
    />
    I got the stack trace from the prompt by using jdev.exe.
    <StackTrace:
    oracle.jdeveloper.cm.ds.db.ValidationException: Columns of type varchar cannot h
    ave a size specified.
    at oracle.jdeveloper.offlinedb.OfflineDBTableValidator.validateObject(Of
    flineDBTableValidator.java:116)
    at oracle.jdeveloper.cm.ds.db.AbstractDBObjectProvider.validateObject(Ab
    stractDBObjectProvider.java:601)
    at oracle.jdeveloper.offlinedb.OfflineDBObjectProvider.updateObject(Offl
    ineDBObjectProvider.java:952)
    at oracle.tip.tools.ide.pm.wizard.adapter.db.DBAdapterDescriptorGenerato
    r.generate(DBAdapterDescriptorGenerator.java:274)
    at oracle.tip.tools.ide.pm.wizard.adapter.db.DBAdapterSelectTablePage.ac
    tionPerformed(DBAdapterSelectTablePage.java:451)
    at javax.swing.AbstractButton.fireActionPerformed(AbstractButton.java:17
    86)
    at javax.swing.AbstractButton$ForwardActionEvents.actionPerformed(Abstra
    ctButton.java:1839)
    at javax.swing.DefaultButtonModel.fireActionPerformed(DefaultButtonModel
    .java:420)
    at javax.swing.DefaultButtonModel.setPressed(DefaultButtonModel.java:258
    at javax.swing.plaf.basic.BasicButtonListener.mouseReleased(BasicButtonL
    istener.java:245)
    at java.awt.Component.processMouseEvent(Component.java:5100)
    at java.awt.Component.processEvent(Component.java:4897)
    at java.awt.Container.processEvent(Container.java:1569)
    at java.awt.Component.dispatchEventImpl(Component.java:3615)
    at java.awt.Container.dispatchEventImpl(Container.java:1627)
    at java.awt.Component.dispatchEvent(Component.java:3477)
    at java.awt.LightweightDispatcher.retargetMouseEvent(Container.java:3483
    at java.awt.LightweightDispatcher.processMouseEvent(Container.java:3198)
    at java.awt.LightweightDispatcher.dispatchEvent(Container.java:3128)
    at java.awt.Container.dispatchEventImpl(Container.java:1613)
    at java.awt.Window.dispatchEventImpl(Window.java:1606)
    at java.awt.Component.dispatchEvent(Component.java:3477)
    at java.awt.EventQueue.dispatchEvent(EventQueue.java:456)
    at java.awt.EventDispatchThread.pumpOneEventForHierarchy(EventDispatchTh
    read.java:201)
    at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThre
    ad.java:151)
    at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThre
    ad.java:141)
    at java.awt.Dialog$1.run(Dialog.java:540)
    at java.awt.Dialog.show(Dialog.java:561)
    at java.awt.Component.show(Component.java:1133)
    at java.awt.Component.setVisible(Component.java:1088)
    at oracle.bali.ewt.wizard.WizardDialog.runDialog(Unknown Source)
    at oracle.tip.tools.ide.pm.wizard.adapter.techAdapterWizard.display(tech
    AdapterWizard.java:151)
    at oracle.tip.tools.ide.pm.bpelgraph.editors.PartnerLinkEditPage.handleA
    dapterWizard(PartnerLinkEditPage.java:311)
    at oracle.tip.tools.ide.pm.bpelgraph.editors.PartnerLinkEditPage.actionP
    erformed(PartnerLinkEditPage.java:893)
    at javax.swing.AbstractButton.fireActionPerformed(AbstractButton.java:17
    86)
    at javax.swing.AbstractButton$ForwardActionEvents.actionPerformed(Abstra
    ctButton.java:1839)
    at javax.swing.DefaultButtonModel.fireActionPerformed(DefaultButtonModel
    .java:420)
    at javax.swing.DefaultButtonModel.setPressed(DefaultButtonModel.java:258
    at javax.swing.plaf.basic.BasicButtonListener.mouseReleased(BasicButtonL
    istener.java:245)
    at java.awt.AWTEventMulticaster.mouseReleased(AWTEventMulticaster.java:2
    31)
    at java.awt.Component.processMouseEvent(Component.java:5100)
    at java.awt.Component.processEvent(Component.java:4897)
    at java.awt.Container.processEvent(Container.java:1569)
    at java.awt.Component.dispatchEventImpl(Component.java:3615)
    at java.awt.Container.dispatchEventImpl(Container.java:1627)
    at java.awt.Component.dispatchEvent(Component.java:3477)
    at java.awt.LightweightDispatcher.retargetMouseEvent(Container.java:3483
    at java.awt.LightweightDispatcher.processMouseEvent(Container.java:3198)
    at java.awt.LightweightDispatcher.dispatchEvent(Container.java:3128)
    at java.awt.Container.dispatchEventImpl(Container.java:1613)
    at java.awt.Window.dispatchEventImpl(Window.java:1606)
    at java.awt.Component.dispatchEvent(Component.java:3477)
    at java.awt.EventQueue.dispatchEvent(EventQueue.java:456)
    at java.awt.EventDispatchThread.pumpOneEventForHierarchy(EventDispatchTh
    read.java:201)
    at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThre
    ad.java:151)
    at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThre
    ad.java:141)
    at java.awt.Dialog$1.run(Dialog.java:540)
    at java.awt.Dialog.show(Dialog.java:561)
    at oracle.tip.tools.ide.pm.bpelgraph.editors.PartnerLinkDialog.create(Pa
    rtnerLinkDialog.java:90)
    at oracle.tip.tools.ide.pm.bpelgraph.collaxalaf.BPELGraphPane.createPart
    nerLink(BPELGraphPane.java:324)
    at oracle.tip.tools.ide.pm.bpelgraph.collaxalaf.BPELDNDDropHandler.handl
    eDrop(BPELDNDDropHandler.java:77)
    at oracle.tip.tools.ide.common.graph.DefaultGraphPaneDropTargetListener.
    routeToDropHandler(DefaultGraphPaneDropTargetListener.java:212)
    at oracle.tip.tools.ide.common.graph.DefaultGraphPaneDropTargetListener.
    handleDrop(DefaultGraphPaneDropTargetListener.java:200)
    at oracle.tip.tools.ide.pm.bpelgraph.collaxalaf.BPELGraphPaneDropTargetL
    istener.handleDrop(BPELGraphPaneDropTargetListener.java:75)
    at oracle.tip.tools.ide.common.graph.DefaultGraphPaneDropTargetListener.
    drop(DefaultGraphPaneDropTargetListener.java:260)
    at java.awt.dnd.DropTarget.drop(DropTarget.java:398)
    at sun.awt.dnd.SunDropTargetContextPeer.processDropMessage(SunDropTarget
    ContextPeer.java:542)
    at sun.awt.dnd.SunDropTargetContextPeer.access$800(SunDropTargetContextP
    eer.java:52)
    at sun.awt.dnd.SunDropTargetContextPeer$EventDispatcher.dispatchDropEven
    t(SunDropTargetContextPeer.java:805)
    at sun.awt.dnd.SunDropTargetContextPeer$EventDispatcher.dispatchEvent(Su
    nDropTargetContextPeer.java:743)
    at sun.awt.dnd.SunDropTargetEvent.dispatch(SunDropTargetEvent.java:29)
    at java.awt.Component.dispatchEventImpl(Component.java:3494)
    at java.awt.Container.dispatchEventImpl(Container.java:1627)
    at java.awt.Component.dispatchEvent(Component.java:3477)
    at java.awt.LightweightDispatcher.retargetMouseEvent(Container.java:3483
    at java.awt.LightweightDispatcher.processDropTargetEvent(Container.java:
    3269)
    at java.awt.LightweightDispatcher.dispatchEvent(Container.java:3123)
    at java.awt.Container.dispatchEventImpl(Container.java:1613)
    at java.awt.Window.dispatchEventImpl(Window.java:1606)
    at java.awt.Component.dispatchEvent(Component.java:3477)
    at java.awt.EventQueue.dispatchEvent(EventQueue.java:456)
    at java.awt.EventDispatchThread.pumpOneEventForHierarchy(EventDispatchTh
    read.java:201)
    at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThre
    ad.java:151)
    at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:145)
    at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:137)
    at java.awt.EventDispatchThread.run(EventDispatchThread.java:100)
    />
    <Oracle:
    Oracle JDeveloper 10.1.2.0.0 (Build 1811)
    Oracle IDE     10.1.2.17.84
    Business Components Version     10.1.2.17.96
    UML Modelers Version     10.1.2.16.71
    Versioning Support     10.1.2.16.71
    WebDAV Support Version     10.1.2.16.71
    Struts Modeler Version     10.1.2.6.15
    BPEL Designer     10.1.2.0.0 (Build 050504)
    Designer Generators Framework     10.1.2.7.56
    ADF UIX     2.2.16
    java.version     1.4.2_06
    java.home     E:\OraBPELPM\jdk\jre
    java.vm.name     Java HotSpot(TM) Client VM
    java.vm.vendor     Sun Microsystems Inc.
    java.vm.version     1.4.2_06-b03
    user.language     zh
    user.region     <no value assigned>
    user.name     Administrator
    user.home     C:\Documents and Settings\Administrator
    user.dir     E:\OraBPELPM\integration\jdev\jdev\bin
    os.name     Windows 2003
    os.version     5.2
    os.arch     x86
    http.proxyHost     jproxy.nju.edu.cn
    http.proxyPort     8080
    />
    <SQL Server:
    Microsoft SQL Server 2000 with the Microsoft SQL Server 2000 Driver for JDBC Service Pack 3 installed
    />
    By the way, I have read the thread Thread: DB Adapter not importing SQL Svr tables and take some of their advises but the problem still exist.
    Any help would be greatly appreciated.
    Thanks!
    And Merry Christmas to all!

    Hi, ronen!
    Thank you.
    I followed the steps and the there were no exceptions then.
    However, new runtime error emerged.
    The BPEL PM Server cannot build Toplink Session. But I do not know why.
    The messeges from the "Start BPEL PM Server" console about this project (named "TryDB") is as following (DoSelect is the service name of the DB Adapter):
    <::Outbound><oracle.tip.adapter.db.ox.TopLinkXMLProjectInitializer initialize> I
    nitializing an existing toplink project for use by the database adapter.
    <::Outbound><oracle.tip.adapter.db.ox.TopLinkXMLProjectInitializer initialize> I
    nitializing an existing toplink project for use by the database adapter.
    <2006-01-10 16:03:02,656> <INFO> <default.collaxa.cube.compiler> &#27491;&#22312;&#39564;&#35777; "E:\Or
    aBPELPM\integration\orabpel\domains\default\tmp\.bpel_TryDB_1.0.jar\TryDB.bpel"
    <2006-01-10 16:03:05,156> <INFO> <default.collaxa.cube.engine.deployment> <CubeP
    rocessFactory::generateProcessClass>
    &#27969;&#31243; "TryDB" (&#20462;&#35746; "1.0") &#32534;&#35793;&#25104;&#21151;&#12290;
    <2006-01-10 16:03:05,765> <INFO> <default.collaxa.cube.engine.deployment> &#27969;&#31243; "
    TryDB" (&#20462;&#35746;&#26631;&#35760; "1.0") &#24050;&#25104;&#21151;&#21152;&#36733;&#12290;
    06/01/10 16:03:34 Tutalii: E:\OraBPELPM\integration\orabpel\lib\orabpel.jar arch
    ive
    <2006-01-10 16:03:34,500> <INFO> <default.collaxa.cube.ws> <AdapterFramework::Ou
    tbound> file:/E:/OraBPELPM/integration/orabpel/domains/default/tmp/.bpel_TryDB_1
    .0.jar/DoSelect.wsdl [ DoSelect_ptt::DoSelectSelect(DoSelectSelect_inparameters,
    AirlineTableCollection) ] - Using JCA Connection Pool - max size = <unbounded>
    <2006-01-10 16:03:35,093> <ERROR> <default.collaxa.cube.ws> <Database Adapter::O
    utbound> <oracle.tip.adapter.db.DBManagedConnectionFactory acquireClientSession>
    unable to build the TopLink Session
    <2006-01-10 16:03:35,125> <ERROR> <default.collaxa.cube.ws> <Database Adapter::O
    utbound> <oracle.tip.adapter.db.DBInteraction executeOutboundRead> unable to exe
    cute the NamedQuery: TryDB.AirlineTable.DoSelectSelect
    <2006-01-10 16:03:35,125> <ERROR> <default.collaxa.cube.ws> <AdapterFramework::O
    utbound> file:/E:/OraBPELPM/integration/orabpel/domains/default/tmp/.bpel_TryDB_
    1.0.jar/DoSelect.wsdl [ DoSelect_ptt::DoSelectSelect(DoSelectSelect_inparameters
    ,AirlineTableCollection) ] - Could not invoke operation 'DoSelectSelect' against
    the 'Database Adapter' due to:
    ORABPEL-11622
    &#26080;&#27861;&#21019;&#24314;/&#35775;&#38382; TopLink &#20250;&#35805;.
    &#27492;&#20250;&#35805;&#29992;&#20110;&#36830;&#25509;&#21040;&#25968;&#25454;&#23384;&#20648;&#12290;.
    &#26377;&#20851;&#29305;&#23450;&#24322;&#24120;&#38169;&#35823;, &#35831;&#21442;&#38405;&#26681;&#24322;&#24120;&#38169;&#35823;&#12290;&#24744;&#21487;&#33021;&#38656;&#35201;&#22312; j2ee/home/application-deploymen
    ts/default/DbAdapter/oc4j-ra.xml &#20013;&#37197;&#32622;&#36830;&#25509;&#35774;&#32622;&#24182;&#37325;&#26032;&#21551;&#21160;&#26381;&#21153;&#22120;&#12290;&#30001; $J2EE_HOME/a
    pplication-deployments/default/DbAdapter/oc4j-ra.xml &#23548;&#33268;&#12290;
    <2006-01-10 16:03:35,125> <INFO> <default.collaxa.cube.ws> <AdapterFramework::Ou
    tbound> Change logging level for Logger 'default.collaxa.cube.ws' to DEBUG to se
    e full error stack
    <2006-01-10 16:03:35,125> <ERROR> <default.collaxa.cube.ws> <AdapterFramework::O
    utbound> file:/E:/OraBPELPM/integration/orabpel/domains/default/tmp/.bpel_TryDB_
    1.0.jar/DoSelect.wsdl [ DoSelect_ptt::DoSelectSelect(DoSelectSelect_inparameters
    ,AirlineTableCollection) ] - Rolling back JCA LocalTransaction
    And in the Audit part of the BPEL Console, I got the following "details"
    <remoteFault xmlns="http://schemas.oracle.com/bpel/extension">
    <part name="code">
    <code>4003</code>
    </part>
    <part name="summary">
    <summary>file:/E:/OraBPELPM/integration/orabpel/domains/default/tmp/.bpel_TryDB_1.0.jar/DoSelect.wsdl [
    DoSelect_ptt::DoSelectSelect(DoSelectSelect_inparameters,AirlineTableCollection) ] - WSIF JCA Execute of operation
    'DoSelectSelect' failed due to: ????/?? TopLink ??. ?????????????. ; nested exception is: ORABPEL-11622 ????/??
    TopLink ??. ?????????????. ????????, ??????????????? j2ee/home/application-deployments/default/DbAdapter/oc4j-ra.xml
    ????????????????? $J2EE_HOME/application-deployments/default/DbAdapter/oc4j-ra.xml ???</summary>
    </part>
    <part name="detail">
    <detail>??????: ????????? [com.microsoft.jdbc.sqlserver.SQLServerDriver]?</detail>
    </part>
    </remoteFault>
    My oc4j-ra.xml has the following content (SQLServerConnection is the name of the connection of SQL Server database):
    <connector-factory location="eis/DB/SQLServerConnection" connector-name="Database Adapter">
         <config-property name="driverClassName" value="com.microsoft.jdbc.sqlserver.SQLServerDriver"/>
         <config-property name="connectionString" value="jdbc:microsoft:sqlserver://localhost:1433;SelectMethod=cursor;databasename=lxbpel"/>
         <config-property name="userName" value="bpel"/>
         <config-property name="password" value="bpel"/>
         <config-property name="minConnections" value="5"/>
         <config-property name="maxConnections" value="5"/>
         <config-property name="minReadConnections" value="1"/>
         <config-property name="maxReadConnections" value="1"/>
         <config-property name="usesExternalConnectionPooling" value="false"/>
         <config-property name="dataSourceName" value=""/>
         <config-property name="usesExternalTransactionController" value="false"/>
         <config-property name="platformClassName" value="oracle.toplink.internal.databaseaccess.SQLServerPlatform"/>
         <config-property name="usesNativeSequencing" value="true"/>
         <config-property name="sequencePreallocationSize" value="50"/>
         <config-property name="tableQualifier" value=""/>
    </connector-factory>
    I think this configuration in this oc4j-ra.xml is fine
    So please help me again. I owe you so much.
    Thank you!

  • SQL Server 2000 and 2008 Standard Edition

    Hi,
    I was wondering if anyone knows if there are any auditing limitations in the standard editions of SQL server 2000 and 2008 R2.
    I'm interested to know if there are audit functions for user auditing like creation, deletion and logons
    Can't seem to find any information about this.

    In addition to Shanky notes, please  have a look at these article:
    DML Trigger Status Alerts
    Implementing generic audit trail trigger in sql server
    Saeid Hasani [sqldevelop]

  • Null connection when trying to connect to SQL Server 2000 in Tomcat4.1.29

    Hi All,
    I am still struggling with null connection when trying to connect to sql server 2000 with tomcat using sun.jdbc.odbc.JdbcOdbcDriver
    Here is my server.xml
    <Server port="8005" shutdown="SHUTDOWN" debug="0">
    <Listener className="org.apache.catalina.mbeans.ServerLifecycleListener"
    debug="0"/>
    <Listener className="org.apache.catalina.mbeans.GlobalResourcesLifecycleListener"
    debug="0"/>
    <GlobalNamingResources>
    <Resource name="UserDatabase" auth="Container"
    type="org.apache.catalina.UserDatabase"
    description="User database that can be updated and saved">
    </Resource>
    <ResourceParams name="UserDatabase">
    <parameter>
    <name>factory</name>
    <value>org.apache.catalina.users.MemoryUserDatabaseFactory</value>
    </parameter>
    <parameter>
    <name>pathname</name>
    <value>conf/tomcat-users.xml</value>
    </parameter>
    </ResourceParams>
    <Resource auth="Container" description="Users and Groups
    Database" name="UserDatabase"
    scope="Shareable"
    type="org.apache.catalina.UserDatabase"/>
    <Resource name="jdbc/DefaultDS" scope="Shareable"
    type="javax.sql.DataSource"/>
    <ResourceParams name="UserDatabase">
    <parameter>
    <name>factory</name>
    <value>org.apache.catalina.users.
    MemoryUserDatabaseFactory</value>
    </parameter>
    <parameter>
    <name>pathname</name>
    <value>conf/tomcat-users.xml</value>
    </parameter>
    </ResourceParams>
    <ResourceParams name="jdbc/DefaultDS">
    <parameter>
    <name>validationQuery</name>
    <value></value>
    </parameter>
    <parameter>
    <name>user</name>
    <value>sa</value>
    </parameter>
    <parameter>
    <name>maxWait</name>
    <value>5000</value>
    </parameter>
    <parameter>
    <name>maxActive</name>
    <value>4</value>
    </parameter>
    <parameter>
    <name>password</name>
    <value>sa</value>
    </parameter>
    <parameter>
    <name>url</name>
    <value>jdbc:odbc:JBoss-SQL://localhost:1433;databaseName=Development;selectMethod=cursor;</value>
    </parameter>
    <parameter>
    <name>driverClassName</name>
    <value>sun.jdbc.odbc.JdbcOdbcDriver</value>
    </parameter>
    <parameter>
    <name>maxIdle</name>
    <value>2</value>
    </parameter>
    </ResourceParams>
    </GlobalNamingResources>
    <!-- Define the Tomcat Stand-Alone Service -->
    <Service name="Tomcat-Standalone">
    <Connector className="org.apache.coyote.tomcat4.CoyoteConnector"
    port="8080" minProcessors="5" maxProcessors="75"
    enableLookups="true" redirectPort="8443"
    acceptCount="100" debug="0" connectionTimeout="20000"
    useURIValidationHack="false" disableUploadTimeout="true" />
    <!-- Note : To disable connection timeouts, set connectionTimeout value
    to -1 -->
    <!-- Define a SSL Coyote HTTP/1.1 Connector on port 8443 -->
    <!--
    <Connector className="org.apache.coyote.tomcat4.CoyoteConnector"
    port="8443" minProcessors="5" maxProcessors="75"
    enableLookups="true"
    acceptCount="100" debug="0" scheme="https" secure="true"
    useURIValidationHack="false" disableUploadTimeout="true">
    <Factory className="org.apache.coyote.tomcat4.CoyoteServerSocketFactory"
    clientAuth="false" protocol="TLS" />
    </Connector>
    -->
    <!-- Define a Coyote/JK2 AJP 1.3 Connector on port 8009 -->
    <Connector className="org.apache.coyote.tomcat4.CoyoteConnector"
    port="8009" minProcessors="5" maxProcessors="75"
    enableLookups="true" redirectPort="8443"
    acceptCount="10" debug="0" connectionTimeout="0"
    useURIValidationHack="false"
    protocolHandlerClassName="org.apache.jk.server.JkCoyoteHandler"/>
    <!-- Define an AJP 1.3 Connector on port 8009 --><Logger className="org.apache.catalina.logger.FileLogger"
    prefix="catalina_log." suffix=".txt"
    timestamp="true"/>
    <!-- Define the default virtual host -->
    <Host name="localhost" debug="0" appBase="webapps"
    unpackWARs="true" autoDeploy="true">
    <Logger className="org.apache.catalina.logger.FileLogger"
    directory="logs" prefix="localhost_log." suffix=".txt"
    timestamp="true"/>
    <Environment name="maxExemptions" type="java.lang.Integer"
    value="15"/>
    <Parameter name="context.param.name" value="context.param.value"
    override="false"/>
    <Resource name="jdbc/DefaultDS" auth="container" type="javax.sql.DataSource"/>
    <ResourceParams name="jdbc/DefaultDS">
    <!-- Maximum number of dB connections in pool.
    Set to 0 for no limit.
    -->
    <parameter>
    <name>maxActive</name>
    <value>8</value>
    </parameter>
    <!-- Maximum number of idle dB connections to retain in pool.
    Set to 0 for no limit.
    -->
    <parameter>
    <name>maxIdle</name>
    <value>4</value>
    </parameter>
    <!-- Maximum time to wait for a dB connection to become available
    in ms, in this example 10 seconds. An Exception is thrown if
    this timeout is exceeded. Set to -1 to wait indefinitely.
    -->
    <parameter>
    <name>maxWait</name>
    <value>5000</value>
    </parameter>
    <!-- MS Sql Server dB username and password for dB connections
    -->
    <parameter>
    <name>user</name>
    <value>sa</value>
    </parameter>
    <parameter>
    <name>password</name>
    <value>sa</value>
    </parameter>
    <!-- Class name for MS Sql Server JDBC driver
    -->
    <parameter>
    <name>driverClassName</name>
    <value>sun.jdbc.odbc.JdbcOdbcDriver</value>
    </parameter>
    <!-- The JDBC connection url for connecting to MS Sql Server dB.
    -->
    <parameter>
    <name>url</name>
    <value>jdbc:odbc:JBoss-SQL://localhost:1433;databaseName=Development;selectMethod=cursor;</value>
    </parameter>
    <!-- This Databae Connection Pool Description.
    -->
    <parameter>
    <name>description</name>
    <value>JDBC Driver: sun.jdbc.odbc.JdbcOdbcDriver</value>
    </parameter>
    </ResourceParams>
    <Resource name="mail/Session" auth="Container"
    type="javax.mail.Session"/>
    <ResourceParams name="mail/Session">
    <parameter>
    <name>mail.smtp.host</name>
    <value>localhost</value>
    </parameter>
    </ResourceParams>
    <ResourceLink name="linkToGlobalResource"
    global="simpleValue"
    type="java.lang.Integer"/>
    </Host>
    </Engine>
    </Service>
    </Server>
    and my web.xml
    <?xml version="1.0" encoding="UTF-8"?>
    <!DOCTYPE web-app PUBLIC "-//Sun Microsystems, Inc.//DTD Web Application 2.3//EN" "http://java.sun.com/dtd/web-app_2_3.dtd">
    <!-- Standard Action Servlet Mapping -->
    <web-app>
    <resource-ref>
    <res-ref-name>jdbc/DefaultDS</res-ref-name>
    <res-type>javax.sql.DataSource</res-type>
    <res-auth>Container</res-auth>
    </resource-ref>
    </web-app>
    and JBoss-SQL is data source I created from control panel settings and here is way I am retrieving connetion
    InitialContext initCtx = new InitialContext();
    DataSource ds = (DataSource) initCtx.lookup("java:comp/env/jdbc/DefaultDS");
    Connection con = ds.getConnection();
    return con;
    I tried connecting as mentioned in this website
    http://jakarta.apache.org/tomcat/tomcat-4.1-doc/jndi-datasource-examples-howto.html#Common%20Problems.But didn't help
    Please help urgent
    Sorry for long file. Can any one please help me in solving this problem.
    Thanks in advnace
    Kurakula

    I'd recommend that you not use the JDBC-ODBC bridge driver to connect to SQL Server. M$ and jTDS are two free type IV JDBC drivers that you should use instead. Put those JARs in the WEB-INF/lib directory.
    The database URL you're using is not correct if you change drivers. Consult the docs to find out what the proper syntax is.
    MOD

  • Creating a connection pool using SQL Server 2000, Sun ONE Application Serve

    Has any one succesfully configured SQL Server 2000 to work with Sun ONE Application Server 7 on Windows 2000 server service pack 4? I am embarking on a new J2EE project and I need to configure it as soon as possible.
    The problem I am having is that, when I ping the data souce name, there is a connection error.
    I have set the data source name and other details as follows:
    Under JDBC, I have set the parameters for the connection pool as follows:
    Data Source Name:      com.microsoft.jdbc.sqlserver.SQLServerDriver
    Database Name:          jdbc:microsoft:sqlserver://localhost:1433;DatabaseName=Test
    User:               test
    Password:          test
    In the JVM settings page, I have set the prefix class path as follows for the location of the Microsoft JDBC
    drivers that I downloaded as follows:
    c:\microsoft\drivers/lib/msbase.jar
    c:\microsoft\drivers/lib/msutil.jar
    c:\microsoft\drivers/lib/mssqlserver.jar
    Under JVM Options, there is a strange setting which I don't understand: perhaps this is the cause of the
    connction error?
    -Djdbc.drivers=com.pointbase.jdbc.jdbcUniversalDriver
    Please help????

    I'm in a similar boat...
    Trying to setup AS7 JDBC and followed the instructions on the link you provided and get the following exception. I kept the case the same, thinking 'setpassword" was incorrect, so I tried changing the property to "Password", but get the same exception but it points to "setPassword" instead.
    SEVERE: RAR5041:Cannot get jdbc connection
    com.sun.enterprise.repository.J2EEResourceException
    java.lang.NoSuchMethodException: setpassword
    at com.sun.enterprise.repository.JdbcConnectionPool.createDataSource(JdbcConnectionPool.java:243)
    at com.sun.enterprise.resource.JdbcUrlAllocator.createResource(JdbcUrlAllocator.java:80)
    at com.sun.enterprise.resource.IASNonSharedResourcePool.createSteadyResources(IASNonSharedResourcePool.java:856)
    at com.sun.enterprise.resource.IASNonSharedResourcePool.initPool(IASNonSharedResourcePool.java:416)
    at com.sun.enterprise.resource.IASNonSharedResourcePool.internalGetResource(IASNonSharedResourcePool.java:625)
    at com.sun.enterprise.resource.IASNonSharedResourcePool.getResource(IASNonSharedResourcePool.java:520)
    at com.sun.enterprise.resource.PoolManagerImpl.getResourceFromPool(PoolManagerImpl.java:263)
    at com.sun.enterprise.resource.JdbcXAConnection.<init>(JdbcXAConnection.java:74)
    at com.sun.enterprise.resource.Jdbc10XaAllocator.createResource(Jdbc10XaAllocator.java:94)
    at com.sun.enterprise.resource.IASNonSharedResourcePool.createSteadyResources(IASNonSharedResourcePool.java:856)
    at com.sun.enterprise.resource.IASNonSharedResourcePool.initPool(IASNonSharedResourcePool.java:416)
    at com.sun.enterprise.resource.IASNonSharedResourcePool.internalGetResource(IASNonSharedResourcePool.java:625)
    at com.sun.enterprise.resource.IASNonSharedResourcePool.getResource(IASNonSharedResourcePool.java:520)
    at com.sun.enterprise.resource.PoolManagerImpl.getResourceFromPool(PoolManagerImpl.java:263)
    at com.sun.enterprise.resource.PoolManagerImpl.getResource(PoolManagerImpl.java:170)
    at com.sun.enterprise.resource.JdbcDataSource.internalGetConnection(JdbcDataSource.java:241)
    at com.sun.enterprise.resource.JdbcDataSource.getConnection(JdbcDataSource.java:98)
    at com.rvi.database.jdbcConnection.getConnection(jdbcConnection.java:93)
    at com.webapp.database.ArticlesDAO.selectByYear(ArticlesDAO.java:102)
    at com.webapp.actions.ArticleAction.list(ArticleAction.java:96)
    at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
    at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
    at java.lang.reflect.Method.invoke(Method.java:324)
    at org.apache.struts.actions.DispatchAction.dispatchMethod(DispatchAction.java:280)
    at org.apache.struts.actions.DispatchAction.execute(DispatchAction.java:216)
    at org.apache.struts.action.RequestProcessor.processActionPerform(RequestProcessor.java:484)
    at org.apache.struts.action.RequestProcessor.process(RequestProcessor.java:274)
    at org.apache.struts.action.ActionServlet.process(ActionServlet.java:1482)
    at org.apache.struts.action.ActionServlet.doGet(ActionServlet.java:507)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
    at org.apache.catalina.core.StandardWrapperValve.invokeServletService(StandardWrapperValve.java:720)
    at org.apache.catalina.core.StandardWrapperValve.access$000(StandardWrapperValve.java:118)
    at org.apache.catalina.core.StandardWrapperValve$1.run(StandardWrapperValve.java:278)
    at java.security.AccessController.doPrivileged(Native Method)
    at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:274)
    at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:505)
    at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:212)
    at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:505)
    at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:203)
    at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:505)
    at com.iplanet.ias.web.connector.nsapi.NSAPIProcessor.process(NSAPIProcessor.java:157)
    at com.iplanet.ias.web.WebContainer.service(WebContainer.java:598)

Maybe you are looking for

  • Problem with memory usage and CPU usage

    Hello, i have a problem with the memory usage and cpu usage in my project! My application must run for more than 24 hrs. The problem is that the longer it runs the bigger is the memory and cpu usage! It starts with ~15% CPU usage and ~70 MBytes memor

  • I'm updating my iPod Touch 5th Gen and it says "Connect to iTunes" and I have, but nothing happens.

    Okay, so, I unlocked my iPod and it said an update was available, so I tapped install. It wasn't connected to a power source, and I didn't think it'd make any difference if I was or not. So, I tapped it, blah, blah, blah, and then it said to connect

  • How to unload externally loaded swf which contains 3D Carousel?

    Hello to all I am learning AS3 and have been taking on various tutorials found on the net. While learning about AS3 I came across a lesson on http://tutorials.flashmymind.com/2009/05/vertical-3d-carousel-with-actionscript-3-and-xml/ titled "Vertical

  • JVM 1.4 seg faults with pure java code?

    Has anybody else seen JVM 1.4 seg fault when running pure java code? This seems like it shouldn't be possible, but I get the following at indeterminate times. Unfortunately, it is difficult to isolate since decreasing the size of the program avoids t

  • FM import parameter - lowercase

    Hi, I need the import parameter in a FM to NOT convert lowercase letters to uppercase. I have defined the import parameter type a type whose domain has a checkmark in the "lowercase" (RZLLI_APCL). Despite this, when I run the program I see it gets co