SQL Server 2000 on Windows 7

I need to install SQL Server 2000 on a Windows 7 machine. When I start the install I get a message "SQL Server 2000 is incompatible with this versions. For more information contact Microsoft." I searched the forums but did not find
anything about this situation. Does anyone have any information? And before anyone asks I need to install this version because that is what the customer is using and I need to duplicate their databases.Edward R. Joell MCSD MCDBA

1. Jing Jin. If you had READ the post you would have seen that installing later versions is NOT an option.
2. Not supported does NOT mean does NOT work, as Balmukund pointed out in the referenced thread. The site that this databases supports is using ASP which is also NOT supported by Microsoft. As it turns out Balmukund's solution actually turns
out to be the correct solution. I installed SS2K and its Service pack 4 on the machine last night. Good answer Balmukund. as we say in the Navy, "BRAVO ZULU!!" which means "WELL DONE!!
3. Tom Li I just posted the question less than 48 hours ago. My last post was less than 24 hours ago. I think I have the right to be given the opportunity to determine whether a reply is the answer or not. I understand you don't like unanswered
posts sitting around for weeks, months or years. (I don't like it either as I have a few that are still unanswered after several years.) But you should not be showing replies as answers before I even get a chance to see them, much less try them out.
You should also not be showing replies as answers which don't address the criteria of the question. I specifically stated that I had to install SS2K. I went on to state, "And before anyone asks I need to install this version because that is what
the customer is using and I need to duplicate their databases." So the correct answer, if in fact SS2K did not work on Windows 7, would have been a virtual machine answer, as suggested on the thread Balmukund referenced. So before you mark a reply
as an answer read the question.
Edward R. Joell MCSD MCDBA

Similar Messages

ODBC errors for Oracle Migration Workbench and SQL Server 2000 on Windows

Hi all-
I setup a new ODBC connection for the Oracle 10g Migration Workbench to MS SQL Server 2000 on Windows XP and keep getting the following errors when I try to
either test the new ODBC connection to MS SQL Server 2000 for use with the Oracle Migration Workbench tool. Goal is to fix these errors so that I can migrate our test SQL Server 2000 databases to Oracle 10g.
Current configuration
- Oracle 10.1 Migration Workbench
- Oracle 10g Database (target)
- MS SQL Server 2000 (source database)
-Windows XP
-ODBC 3.85.1117 driver for Windows XP with SQL Server and Oracle
Errors:
I. When I test the ODBC connection:
Microsoft SQL Server ODBC Driver Version 03.85.1117
Running connectivity tests...
Attempting connection
[Microsoft][ODBC SQL Server Driver][TCP/IP Sockets]Specified SQL server not found.
TESTS FAILED!
Now here is what has me totally confused:
I can use the command line ISQL to access the database on the server and IP is all correct and port is available. So I can access the SQL Server database fine it is when I try to setup ODBC that it gives me problems.
Any tips how to get this ODBC working?
Thanks
Ben Prusinski

1. Jing Jin. If you had READ the post you would have seen that installing later versions is NOT an option.
2. Not supported does NOT mean does NOT work, as Balmukund pointed out in the referenced thread. The site that this databases supports is using ASP which is also NOT supported by Microsoft. As it turns out Balmukund's solution actually turns
out to be the correct solution. I installed SS2K and its Service pack 4 on the machine last night. Good answer Balmukund. as we say in the Navy, "BRAVO ZULU!!" which means "WELL DONE!!
3. Tom Li I just posted the question less than 48 hours ago. My last post was less than 24 hours ago. I think I have the right to be given the opportunity to determine whether a reply is the answer or not. I understand you don't like unanswered
posts sitting around for weeks, months or years. (I don't like it either as I have a few that are still unanswered after several years.) But you should not be showing replies as answers before I even get a chance to see them, much less try them out.
You should also not be showing replies as answers which don't address the criteria of the question. I specifically stated that I had to install SS2K. I went on to state, "And before anyone asks I need to install this version because that is what
the customer is using and I need to duplicate their databases." So the correct answer, if in fact SS2K did not work on Windows 7, would have been a virtual machine answer, as suggested on the thread Balmukund referenced. So before you mark a reply
as an answer read the question.
Edward R. Joell MCSD MCDBA

Can't Share SQL Server 2000 in Windows 7 Pro

I had installed SQL Server 2000 in my Windows 7 Professional and use in it in this PC. But Can't Use in my network Group Windows 7 Professional and
Windows Xp, Can I Solve This Issue?

Hello,
SQL Server is not longer Support and especially not on Windows 7.
In a Windows Workgroup you can only use SQL Login authentication, for this you have to Switch the SQL Server to "Mixed Mode" = "SQL And Windows authentication; see
Change Server Authentication Mode
Olaf Helper
[ Blog] [ Xing] [ MVP]

JDBC driver for SQL Server 2000 with windows authentication

Does anyone know of a JDBC driver for SQL Server 2000 that supports Windows Authentication, that is that a username and password does not need to be supplied when connecting to the database.

You can use the JDBC-ODBC-Bridge.
ODBC provides windows-authentication.
Hope it helps.
Freddy

SQL Server 2000 Enterprise Edition Compatability with Latest Operating Systems

Hi Team,
My client is using SQL Server 2000 Enterprise edition for the database in the Production.
Now,We are planning to load that data from SQL 2000 to SQL 2012 and test the functionality.
Can you please tell me on which operations systems the SQL Server 2000 is compatible to Install ?
like Windows Server 2012/ 2012 R2/ Windows 7/ 8 etc.
Thanks
Srikrishna

Installing SQL Server 2000 on Windows 2008 or later is not supported, but your question is about compatibility rather than support. SQL Server 2000 may work with the database engine but not with some other features and you'll probably need
to click through warnings installation. Proceed at your own risk if you want to go down that path.
I suggest you install on Windows 2003 for your migration testing to avoid obstacles. Not that support ends for Windows Server 2003 in a few months.
Dan Guzman, SQL Server MVP, http://www.dbdelta.com

Restoration of Database Sql Server 2000

Hello Experts,
In system copy process ,
I have installed New SAP 5.0 Server ( Database - Sql server 2000 ) on window 2003 server edition
and have backup of old production server.
How to restore backup in New SAP server or in database Sql server 2000.
Please give step by step information to restore backup process.
Thanks ,
Rahul S.S.

Hi Rahul,
Please follow restore complete backups section in the article below, it explains step by step various scenarios.
[http://technet.microsoft.com/en-us/library/cc966495.aspx]

Oracle (Linux) to MS SQL Server 2000 (Windows 2003) with OTG

I have Oracle 9i Release 1 running on linux and i want to use Transparent Gateway to connect to MS SQL Server 2000 running on Windows 2003. Is it possible to setup this connection?
If yes, please include the detail approach of installation.
Thank you....

Dear kgronau
i tried the transperent gateway in Win2003
both sqlserver and oracle 10 g onthe same os (win2003)
Created listener and tnsname settings as per the documention spec..
then created a database link for sqlserver here.
my transpernet gateway works without any problem,
Then,
I have Oracle on Linux also,
i created a tnsname settings here for the win2003 listener (for sqlserver connection).
then created a database link for sqlserver here
im not able to connect sqlserver.
i tried to desc one table (sqlserver)
the following error i get,
do you have any idea, what i have missed???
SQL> DESC CUSTOMERS@SQLDB
ERROR:
ORA-02068: following severe error form SQLDB
ORA-03135: connection lost contact
please give some hints what is the problem
remember the listener is running on windows 2003
regards

Connect Oracle 11g (64-bit windows server) to Microsoft SQL Server 2000

Hi all,
I am trying to connect:
Oracle 11g (64-bit windows server) to Microsoft SQL Server 2000 (32-bit) on a different machine.
1) I have create an ODBC connection (called:GALAXY) which connects.
2) created a init.ora called it initgalaxy.ora in $oracle_home\hs\admin
HS_FDS_CONNECT_INFO = GALAXY
HS_FDS_TRACE_LEVEL = on
3) modified the listener.ora file as below
# listener.ora Network Configuration File: E:\Ora11g\product\11.1.0\db_1\network\admin\listener.ora
# Generated by Oracle configuration tools.
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = BIU01)(PORT = 1521))
(DESCRIPTION =
(ADDRESS = (PROTOCOL = IPC)(KEY = extproc0))
SID_LIST_LISTENER=
(SID_LIST=
(SID_DESC =
(GLOBAL_DBNAME = HEX.BIU01.kingsch.nhs.uk)
(ORACLE_HOME = E:\Ora11g\product\11.1.0\db_1)
(SID_NAME = HEX)
(SID_DESC=
(SID_NAME = galaxy)
(ORACLE_HOME = E:\Ora11g\product\11.1.0\db_1)
(PROGRAM = dg4odbc)
(SID_DESC =
(PROGRAM = EXTPROC)
(SID_NAME = PLSExtProc)
(ORACLE_HOME = E:\Ora11g\product\11.1.0\db_1)
4) modified the tnsnames.ora file is as follows
GALAXY =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = BIU01.kingsch.nhs.uk)(PORT = 1521))
(CONNECT_DATA =
(SID = galaxy)
(HS = OK)
HEX =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = BIU01.kingsch.nhs.uk)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = HEX)
5) restarted the listener
6) created a public database connect
create PUBLIC DATABASE LINK "GALAXY" CONNECT TO "USER" IDENTIFIED by "PWD" USING 'galaxy';
This is the error message I can sell in $oracle_home\hs\admin\trace
Oracle Corporation --- MONDAY APR 27 2009 11:54:18.370
Heterogeneous Agent Release
11.1.0.6.0
Oracle Corporation --- MONDAY APR 27 2009 11:54:18.370
Version 11.1.0.6.0
HOSGIP for "HS_FDS_TRACE_LEVEL" returned "ON"
HOSGIP for "HS_OPEN_CURSORS" returned "50"
HOSGIP for "HS_FDS_FETCH_ROWS" returned "100"
HOSGIP for "HS_LONG_PIECE_TRANSFER_SIZE" returned "65536"
HOSGIP for "HS_NLS_NUMERIC_CHARACTER" returned ".,"
HOSGIP for "HS_FDS_RECOVERY_ACCOUNT" returned "RECOVER"
HOSGIP for "HS_FDS_TRANSACTION_LOG" returned ""HS_TRANSACTION_LOG""
HOSGIP for "HS_FDS_TIMESTAMP_AS_DATE" returned "TRUE"
HOSGIP for "HS_FDS_CHARACTER_SEMANTICS" returned "FALSE"
HOSGIP for "HS_FDS_MAP_NCHAR" returned "TRUE"
HOSGIP for "HS_FDS_RESULT_SET_SUPPORT" returned "FALSE"
HOSGIP for "HS_FDS_PROC_IS_FUNC" returned "FALSE"
HOSGIP for "HS_FDS_REPORT_REAL_AS_DOUBLE" returned "FALSE"
using galaxy_live as default value for "HS_FDS_DEFAULT_OWNER"
HOSGIP for "HS_SQL_HANDLE_STMT_REUSE" returned "FALSE"
##>Connect Parameters (len=42)<##
## DSN=GALAXY;
#! UID=galaxy_live;
#! PWD=*
hgocont, line 1890: calling SqlDriverConnect got sqlstate IM002
when I try to test the database link, I get this error:
ORA-28500: connection from ORACLE to a non-Oracle system returned this message:
[Microsoft][ODBC Drive Manager] Data source name not found and no default driver specified
ORA-02063: preceding 2 lines from GALAXY
28500.00000- "connection from ORACLE to ad non-Oracle system returned this message:"
*Cause: The cause is explained in the forwarded message.
*Action: See the non-Oracle system's documentation of the forwarded message.
vendor code 28500
Edited by: user7336435 on 27-Apr-2009 05:56

11.2 is beta at the moment. There is no official release date so far.
As DG4ODBC is independant from the Oracle database (or the target database) you can use a 3 machine model:
On the first machine you have your Oracle database, on a second machine running 32bit Windows you can install DG4ODBC and on the 3rd machine you can run your foreign database.
If the SQL Server 2k is installed on a 32bit Windows machine, then you can also install DG4ODBC on this machine.
In general the connection from an Oracle database to the DG4ODBC machine is done using SDQL*Net. The listener responsible for DG4ODBC will then load the DG4ODBC executable which will connect to the SQL Server using SQL Server ODBC driver.

Update kernel steps for IDES 4.7 - Windows - MS SQL SERVER 2000

Hello,
Concerning updating the kernel - for IDES 4.7, Windows, SQL SERVER 2000 - is there a way to locate exactly the.SAR files - for the database dependent & database independent parts - which are compatible with the used SAP version.
Also, does updating the kernel involve only the following:
- Downloading the .SAR file.
- Taking a backup copy of the exe/run folder's content.
- Stopping the SAP system and all related services.
- Unpacking the .SAR files using the SAPCAR utitilty,
i.e. are there any specific steps to be done after the unpacking ?
Thanks in advance.
Reda Khalifa
IT Department - Almansour Automotive Group - Egypt

Hi Reda,
I guess You want to upgrade kernel from 6.20 to 6.40.
Go to service.sap.com -> downloads -> SAP Support Packages -> Search for SP and Upgrades -> enter "kernel 6.40" and follow the link "kernel 6.40 32-BIT".
On next window choose from location :SAP KERNEL 6.40 \ Windows Server \ Database independent following SARs (title):
-      enq
-      disp+work package
-      dsrlib
-      enserver
-      librfc
-       MMC (optional)
-      Kernel Part I (for Basis 640/620/610) Q1/2007 (very important)
-       saposcol
From location:SAP KERNEL 6.40 \ Windows Server \ MS SQL Server choose following SARs:
-      Database Library
-      R3LOAD
-      R3load Control
-       Kernel Part II (for Basis 640/620/610) Q1/2007 (very important)
Unpack it to newKernel directory and copy it to \exe\run directory.
Next step Frank Deijkers already wrote.
On the end of upgrade go to \exe\run catalog and run sapstartsrv.exe program for registering new service and COM library.
Regards,
Marcin

SQL Server 2000 - Windows Auth

We have a new install of MX 7.01 and are getting the
following message creating a CF datasource to SQL SRV 2000 using
Windows Authentication. We get the following error:
Connection verification failed for data source: AccessRequest
java.sql.SQLException: [Macromedia][SQLServer JDBC
Driver]Could not establish a connection using integrated security:
No LoginModules configured for JDBC_DRIVER_01
The root cause was that: java.sql.SQLException:
[Macromedia][SQLServer JDBC Driver]Could not establish a connection
using integrated security: No LoginModules configured for
JDBC_DRIVER_01
I found these 3 items that look to be applicable - upgrading
the JDBC drivers - but I am a little tentative to install them. We
have another server that we built and did not have to do this. I am
assuming we should use the AdobeJDBC 3.5 upgrade?...
Anyone?
Thanks. Larry.

See the "SQL Server NT authentication users" of
http://www.adobe.com/cfusion/knowledgebase/index.cfm?id=42dcb10a.
ColdFusion has to be started as a domain user that has
priviledges to the database.
Ted Zimmerman

Unable to install SQL Server CE Server Tool on SQL Server 2000 SP 4

Hi
I am facing problem with installing SQL Server CE Server Tool,
I have installed SQL Server 2000 SP 4 which is working fine.
While i am running Setup of "SQL Server 2000 Windows CE Edition version 2.0" ,Developer tools installed successfully but incase of SQL Server CE Server Tool i am getting following Error
"SQL Server CE Tool is compatible only with SQL Server 2000 Service pack 1 and higher.
When you install SQL Server CE Server Tools on a computer running both IIS and SQL Server 2000 , ensure the installer for SQL Server CE Server Tools corresponds To the version of SQL Server 2000."
I am sure that i have running SQL Server 2000 SP 4 (MSDE also SP 4) , IIS (Version 5.1) is also working fine , and one more thing i am trying to install SQL Server CE Server Tool setup is "sqlce20sql2ksp4.exe" (Which i downloaded from microsoft site.).Here all the requirement is fulfill but i dont know what is going to wrong.
I wasted my 2 days behind solving this issue , now i am tiered ,So please any one have solution for this issue.
Help me please.
Thanks in advance.
Regards,
Ketan Gohil
([email protected],[email protected],[email protected])

Refer this link,
http://social.technet.microsoft.com/Forums/sqlserver/en-US/a8591747-689d-4a2e-b301-86094daf6cec/unable-to-install-sql-server-ce-server-tool-on-sql-server-2000-sp-4?forum=sqlce
http://www.vbforums.com/showthread.php?472623-Compatible-SQL-Server-CE-installer
Regards, RSingh

Unable to install SQL server 2000 and 2005 on Satellite A205-s5831

Hello everyone.
I Needs some helps from all of you.
I have Toshiba Laptop Satellite A205-S5831.
Its Have Windows Vista Home Premium.
And I am unable to install SQL server 2000 and 2005.
I also Unable to Install Windows XP SP2.
Problem is SATA driver.
Plz Help me ...!
Response me

Hi
The Windows XP needs a SATA driver if you want to install it on the notebook with SATA HDD controller.
The SATA driver can be found in the Intel Storage Manager.
I would recommend using the nLite program to include a SATA driver into the new Windows XP CD and then to boot from the new created XP CD.
Here you will find all details regarding the nLite:
http://www.nliteos.com/
Regarding SQL server issue;
Maybe you will be able to install in on Windows XP. Possibly there is a compatibility issue between the Vista and the SQL server software

Error while connecting to SQL Server 2000 using Heteregenous Services 11g

Hope this is the right thread to post on! We have been given the challenge of connecting to and reading data from a SQL Server 2000 database.
Our Infrastructure guys have set up the network access.
The SQL Server DB is set to windows NT Authentication only (N.B. NOT Mixed Mode) as there is an application running against the DB locally that will not run under Mixed Mode.
Our Oracle partner has download and installed the 11g Heteregenous Services. all works fine until the point we try to create the DBLink and then connect to the SQL Server DB when we get:
SQL> CREATE DATABASE LINK infoteam1.sco.infoteam.co.uk CONNECT TO "sco.infoteam.co.uk/infoteam" IDENTIFIED BY "########" USING 'dg4msql';
Database link created.
SQL> select * from "systables"@infoteam1.sco.infoteam.co.uk;
select * from "systables"@infoteam1.sco.infoteam.co.uk
ERROR at line 1:
ORA-28500: connection from ORACLE to a non-Oracle system returned this message:
[Oracle][ODBC SQL Server Driver][SQL Server]Login failed for user
'sco.infoteam.co.uk/infoteam'. Reason: Not associated with a trusted SQL Server
connection.[Oracle][ODBC SQL Server Driver]Invalid connection string attribute
ORA-02063: preceding 2 lines from INFOTEAM1.SCO.INFOTEAM.CO.UK
The question is can we (and if so how)?) connect to the SQL Server using an NT Windows Authorised account?
Jeremy

Hi,
Please look at MOS note
ORA-28500: Generic connectivity using ODBC DSN over mapped drive fails [ID 105210.1]
Ora-28500 with Ms Sqlserver - Not associated with a trusted SQL Server connection [ID 333775.1]
Regards,
Edited by: gjilevski1 on Aug 31, 2010 8:23 AM

Problem in Loading Data from SQL Server 2000 to Oracle 10g

Hi All,
I am a university student and using ODI for my final project on real-time data warehousing. I am trying to load data from MS SQL Server 2000 into Oracle 10g target table. Everything goes fine until I execute the interface for the initial load. When I choose the CKM Oracle(Create unique index on the I$ table) km, the following step fails:
21 - Integration - Prj_Dim_RegionInterface - Create Unique Index on flow table
Where Prj_Dim_Region is the name of my target table in Oracle.
The error message is:
955 : 42000 : java.sql.SQLException: ORA-00955: name is already used by an existing object
java.sql.SQLException: ORA-00955: name is already used by an existing object
     at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:125)
     at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:316)
     at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:282)
     at oracle.jdbc.driver.T4C8Oall.receive(T4C8Oall.java:639)
     at oracle.jdbc.driver.T4CPreparedStatement.doOall8(T4CPreparedStatement.java:185)
     at oracle.jdbc.driver.T4CPreparedStatement.execute_for_rows(T4CPreparedStatement.java:633)
     at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:1086)
     at oracle.jdbc.driver.OraclePreparedStatement.executeInternal(OraclePreparedStatement.java:2984)
     at oracle.jdbc.driver.OraclePreparedStatement.executeUpdate(OraclePreparedStatement.java:3057)
     at com.sunopsis.sql.SnpsQuery.executeUpdate(SnpsQuery.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.execStdOrders(SnpSessTaskSql.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTaskTrt(SnpSessTaskSql.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSqlI.treatTaskTrt(SnpSessTaskSqlI.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTask(SnpSessTaskSql.java)
     at com.sunopsis.dwg.dbobj.SnpSessStep.treatSessStep(SnpSessStep.java)
     at com.sunopsis.dwg.dbobj.SnpSession.treatSession(SnpSession.java)
     at com.sunopsis.dwg.cmd.DwgCommandSession.treatCommand(DwgCommandSession.java)
     at com.sunopsis.dwg.cmd.DwgCommandBase.execute(DwgCommandBase.java)
     at com.sunopsis.dwg.cmd.e.i(e.java)
     at com.sunopsis.dwg.cmd.g.y(g.java)
     at com.sunopsis.dwg.cmd.e.run(e.java)
     at java.lang.Thread.run(Unknown Source)
I am using a surrogate key column in my target table alongwith the natural key. The natural key is populated by the primary key of my source table, but for the surrogate key, I have created a sequence in my oracle schema where the target table exists and have used the following code for mapping:
<%=snpRef.getObjectName( "L" , "SQ_PRJ_DIM_REGION" , "D" )%>.nextval
I have chosen to execute this code on target.
Among my attempts to solve this problem was to set Create Index option of the CKM Oracle(Create Index for the I$ Table) to No so that it wont create any index on the flow table. I also tried to use the simple CKM Oracle km . Both solutions allowed the interface to execute successfully without any errors, but the data was not loaded into the target table.
When I right-click on the Prj_Dim_Region data store and choose Data, it shows empty. Pressing the SQL button in this data store shows a dialog box " New Query" where I see this query:
select * from NOVELTYFURNITUREDW.PRJ_DIM_REGION
But when i press OK to run it, I get this error message:
java.lang.IllegalArgumentException: Row index out of range
     at javax.swing.JTable.boundRow(Unknown Source)
     at javax.swing.JTable.setRowSelectionInterval(Unknown Source)
     at com.borland.dbswing.JdbTable.accessChange(JdbTable.java:2959)
     at com.borland.dx.dataset.AccessEvent.dispatch(Unknown Source)
     at com.borland.jb.util.EventMulticaster.dispatch(Unknown Source)
     at com.borland.dx.dataset.DataSet.a(Unknown Source)
     at com.borland.dx.dataset.DataSet.a(Unknown Source)
     at com.borland.dx.dataset.DataSet.a(Unknown Source)
     at com.borland.dx.dataset.DataSet.open(Unknown Source)
     at com.borland.dx.dataset.StorageDataSet.refresh(Unknown Source)
     at com.borland.dx.sql.dataset.QueryDataSet.refresh(Unknown Source)
     at com.borland.dx.sql.dataset.QueryDataSet.executeQuery(Unknown Source)
     at com.sunopsis.graphical.frame.a.cg.actionPerformed(cg.java)
     at javax.swing.AbstractButton.fireActionPerformed(Unknown Source)
     at javax.swing.AbstractButton$ForwardActionEvents.actionPerformed(Unknown Source)
     at javax.swing.DefaultButtonModel.fireActionPerformed(Unknown Source)
     at javax.swing.DefaultButtonModel.setPressed(Unknown Source)
     at javax.swing.plaf.basic.BasicButtonListener.mouseReleased(Unknown Source)
     at java.awt.AWTEventMulticaster.mouseReleased(Unknown Source)
     at java.awt.Component.processMouseEvent(Unknown Source)
     at java.awt.Component.processEvent(Unknown Source)
     at java.awt.Container.processEvent(Unknown Source)
     at java.awt.Component.dispatchEventImpl(Unknown Source)
     at java.awt.Container.dispatchEventImpl(Unknown Source)
     at java.awt.Component.dispatchEvent(Unknown Source)
     at java.awt.LightweightDispatcher.retargetMouseEvent(Unknown Source)
     at java.awt.LightweightDispatcher.processMouseEvent(Unknown Source)
     at java.awt.LightweightDispatcher.dispatchEvent(Unknown Source)
     at java.awt.Container.dispatchEventImpl(Unknown Source)
     at java.awt.Window.dispatchEventImpl(Unknown Source)
     at java.awt.Component.dispatchEvent(Unknown Source)
     at java.awt.EventQueue.dispatchEvent(Unknown Source)
     at java.awt.EventDispatchThread.pumpOneEventForHierarchy(Unknown Source)
     at java.awt.EventDispatchThread.pumpEventsForHierarchy(Unknown Source)
     at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
     at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
     at java.awt.EventDispatchThread.run(Unknown Source)
I do not understand what the problem is and wasting days to figure it out. Any help will be highly appreciated as my deadline is too close for this project.
Thank you so much in advance.
Neel

Hi Cezar,
Can u plz help me with this scenario?
I have one Oracle data model with 19 source tables and one SQL Server data model with 10 target tables. I have created 10 interfaces which use JournalizedDataOnly on one of the tables in the interface; e.g in interface for DimCustomer target table, I have 2 tables, namely Customer and Address, but the journalizing filter appear only on Customer table and this option is disabled for Address automatically.
Now I want to create a package using OdiWaitForLog event detection. Is it possible to put all these 10 interfaces in just one package to populate the target tables? It works fine when I have only one interface and I use the name of one table in the interface for Table Name parameter of OdiWaitForLogData event, but when I try a comma seperated list of table names[Customer, Address] this error happens
java.sql.SQLException: ORA-00942: table or view does not exist
and if I use this method <%=odiRef.getObjectName("L","model_code","logical_schema","D")%>, I get this error
"-CDC_SET_NAME=Exception getObjectName("L", "model_code", "logical_schema", "D") : SnpLSchema.getLSchemaByName : SnpLschema does not exist" "
Please let me know how to make it work?
Do I need to create separate data models each including only those tables which appear in their corresponding interface and package? Or do I need to create multiple packages each with only one journalized interface to populate only one target table?
Thank you for your time in advance.
Regards,
Neel

Creating a connection pool using SQL Server 2000, Sun ONE Application Serve

Has any one succesfully configured SQL Server 2000 to work with Sun ONE Application Server 7 on Windows 2000 server service pack 4? I am embarking on a new J2EE project and I need to configure it as soon as possible.
The problem I am having is that, when I ping the data souce name, there is a connection error.
I have set the data source name and other details as follows:
Under JDBC, I have set the parameters for the connection pool as follows:
Data Source Name:      com.microsoft.jdbc.sqlserver.SQLServerDriver
Database Name:          jdbc:microsoft:sqlserver://localhost:1433;DatabaseName=Test
User:               test
Password:          test
In the JVM settings page, I have set the prefix class path as follows for the location of the Microsoft JDBC
drivers that I downloaded as follows:
c:\microsoft\drivers/lib/msbase.jar
c:\microsoft\drivers/lib/msutil.jar
c:\microsoft\drivers/lib/mssqlserver.jar
Under JVM Options, there is a strange setting which I don't understand: perhaps this is the cause of the
connction error?
-Djdbc.drivers=com.pointbase.jdbc.jdbcUniversalDriver
Please help????

I'm in a similar boat...
Trying to setup AS7 JDBC and followed the instructions on the link you provided and get the following exception. I kept the case the same, thinking 'setpassword" was incorrect, so I tried changing the property to "Password", but get the same exception but it points to "setPassword" instead.
SEVERE: RAR5041:Cannot get jdbc connection
com.sun.enterprise.repository.J2EEResourceException
java.lang.NoSuchMethodException: setpassword
at com.sun.enterprise.repository.JdbcConnectionPool.createDataSource(JdbcConnectionPool.java:243)
at com.sun.enterprise.resource.JdbcUrlAllocator.createResource(JdbcUrlAllocator.java:80)
at com.sun.enterprise.resource.IASNonSharedResourcePool.createSteadyResources(IASNonSharedResourcePool.java:856)
at com.sun.enterprise.resource.IASNonSharedResourcePool.initPool(IASNonSharedResourcePool.java:416)
at com.sun.enterprise.resource.IASNonSharedResourcePool.internalGetResource(IASNonSharedResourcePool.java:625)
at com.sun.enterprise.resource.IASNonSharedResourcePool.getResource(IASNonSharedResourcePool.java:520)
at com.sun.enterprise.resource.PoolManagerImpl.getResourceFromPool(PoolManagerImpl.java:263)
at com.sun.enterprise.resource.JdbcXAConnection.<init>(JdbcXAConnection.java:74)
at com.sun.enterprise.resource.Jdbc10XaAllocator.createResource(Jdbc10XaAllocator.java:94)
at com.sun.enterprise.resource.IASNonSharedResourcePool.createSteadyResources(IASNonSharedResourcePool.java:856)
at com.sun.enterprise.resource.IASNonSharedResourcePool.initPool(IASNonSharedResourcePool.java:416)
at com.sun.enterprise.resource.IASNonSharedResourcePool.internalGetResource(IASNonSharedResourcePool.java:625)
at com.sun.enterprise.resource.IASNonSharedResourcePool.getResource(IASNonSharedResourcePool.java:520)
at com.sun.enterprise.resource.PoolManagerImpl.getResourceFromPool(PoolManagerImpl.java:263)
at com.sun.enterprise.resource.PoolManagerImpl.getResource(PoolManagerImpl.java:170)
at com.sun.enterprise.resource.JdbcDataSource.internalGetConnection(JdbcDataSource.java:241)
at com.sun.enterprise.resource.JdbcDataSource.getConnection(JdbcDataSource.java:98)
at com.rvi.database.jdbcConnection.getConnection(jdbcConnection.java:93)
at com.webapp.database.ArticlesDAO.selectByYear(ArticlesDAO.java:102)
at com.webapp.actions.ArticleAction.list(ArticleAction.java:96)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:324)
at org.apache.struts.actions.DispatchAction.dispatchMethod(DispatchAction.java:280)
at org.apache.struts.actions.DispatchAction.execute(DispatchAction.java:216)
at org.apache.struts.action.RequestProcessor.processActionPerform(RequestProcessor.java:484)
at org.apache.struts.action.RequestProcessor.process(RequestProcessor.java:274)
at org.apache.struts.action.ActionServlet.process(ActionServlet.java:1482)
at org.apache.struts.action.ActionServlet.doGet(ActionServlet.java:507)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at org.apache.catalina.core.StandardWrapperValve.invokeServletService(StandardWrapperValve.java:720)
at org.apache.catalina.core.StandardWrapperValve.access$000(StandardWrapperValve.java:118)
at org.apache.catalina.core.StandardWrapperValve$1.run(StandardWrapperValve.java:278)
at java.security.AccessController.doPrivileged(Native Method)
at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:274)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:505)
at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:212)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:505)
at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:203)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:505)
at com.iplanet.ias.web.connector.nsapi.NSAPIProcessor.process(NSAPIProcessor.java:157)
at com.iplanet.ias.web.WebContainer.service(WebContainer.java:598)

SQL Server 2000 on Windows 7

Similar Messages

Maybe you are looking for