SQL Server 2005 Dev Integration Services Fail
I've got VS2005 v.8.0.50727.867 (vsvista.050727-8600) on my 64bit Windows 7 box. I am trying to install SQL Server 2005 Integration Services on this Win7 box so I can load and edit the Win XP SSIS projects that I had on my XP box. So far I've
not been able to successfully install the Integration Services with a failed permission on the SQL**DTD.msi file.....I've copied this file locally and tried to run it and it would start but then would give permission error.
Is there an inherent incompatibility running SSIS projects in SQL Server 2005 on a 64bit Win 7 box? Worked great on my XP box.
I've been "upgrading" the SSIS projects to VS2008 since I was able to get SSIS installed. Any ideas what I need to do to get this beast to work?
TIA
Harry
Thanks Alberto
Microsoft SQL Server 2005 9.00.1399.06
==============================
OS Version : Professional Service Pack 1 (Build 7601)
Time : Mon Aug 25 09:31:30 2014
DT0315 : Microsoft Internet Information Services (IIS) is either not installed or is disabled. IIS is required by some SQL Server features. Without IIS, some SQL Server features will not be available for installation. To install all SQL Server features,
install IIS from Add or Remove Programs in Control Panel or enable the IIS service through the Control Panel if it is already installed, and then run SQL Server Setup again. For a list of features that depend on IIS, see Features Supported by Editions of SQL
Server in Books Online.
DT0315 : Failed to find the ASP.Net Version Registration with Microsoft Internet Information Services (IIS).
Machine : DT0315
Product : Microsoft SQL Server Setup Support Files (English)
Product Version : 9.00.1399.06
Install : Successful
Log File : C:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\LOG\Files\SQLSetup0007_DT0315_SQLSupport_1.log
Machine : DT0315
Product : Microsoft Office 2003 Web Components
Product Version : 11.0.6558.0
Install : Successful
Log File : C:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\LOG\Files\SQLSetup0007_DT0315_OWC11_1.log
Machine : DT0315
Product : Microsoft SQL Server 2005 Backward compatibility
Product Version : 8.05.1054
Install : Successful
Log File : C:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\LOG\Files\SQLSetup0007_DT0315_BackwardsCompat_1.log
Machine : DT0315
Product : Microsoft SQL Server Setup Support Files (English)
Product Version : 9.00.1399.06
Install : Successful
Log File : C:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\LOG\Files\SQLSetup0007_DT0315_SQLSupport_2.log
Machine : DT0315
Product : Microsoft SQL Server Native Client
Product Version : 9.00.5000.00
Install : Successful
Log File : C:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\LOG\Files\SQLSetup0007_DT0315_SQLNCLI_1.log
Machine : DT0315
Product : Microsoft Office 2003 Web Components
Product Version : 11.0.6558.0
Install : Successful
Log File : C:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\LOG\Files\SQLSetup0007_DT0315_OWC11_2.log
Machine : DT0315
Product : Microsoft SQL Server 2005 Backward compatibility
Product Version : 8.05.1054
Install : Successful
Log File : C:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\LOG\Files\SQLSetup0007_DT0315_BackwardsCompat_2.log
Machine : DT0315
Product : Microsoft SQL Server Setup Support Files (English)
Product Version : 9.00.1399.06
Install : Successful
Log File : C:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\LOG\Files\SQLSetup0007_DT0315_SQLSupport_3.log
Machine : DT0315
Product : Microsoft SQL Server Native Client
Product Version : 9.00.5000.00
Install : Successful
Log File : C:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\LOG\Files\SQLSetup0007_DT0315_SQLNCLI_2.log
Machine : DT0315
Product : Microsoft Office 2003 Web Components
Product Version : 11.0.6558.0
Install : Successful
Log File : C:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\LOG\Files\SQLSetup0007_DT0315_OWC11_3.log
Machine : DT0315
Product : Microsoft SQL Server 2005 Backward compatibility
Product Version : 8.05.1054
Install : Successful
Log File : C:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\LOG\Files\SQLSetup0007_DT0315_BackwardsCompat_3.log
Machine : DT0315
Product : Microsoft SQL Server Setup Support Files (English)
Product Version : 9.00.1399.06
Install : Successful
Log File : C:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\LOG\Files\SQLSetup0007_DT0315_SQLSupport_4.log
Machine : DT0315
Product : Microsoft SQL Server Native Client
Product Version : 9.00.5000.00
Install : Successful
Log File : C:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\LOG\Files\SQLSetup0007_DT0315_SQLNCLI_3.log
Machine : DT0315
Product : Microsoft Office 2003 Web Components
Product Version : 11.0.6558.0
Install : Successful
Log File : C:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\LOG\Files\SQLSetup0007_DT0315_OWC11_4.log
Machine : DT0315
Product : Microsoft VSS Writer for SQL Server 2012
Product Version : 11.0.2100.60
Install : Successful
Log File : C:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\LOG\Files\SQLSetup0007_DT0315_SqlWriter_1.log
Machine : DT0315
Product : Microsoft SQL Server 2005 Backward compatibility
Product Version : 8.05.1054
Install : Successful
Log File : C:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\LOG\Files\SQLSetup0007_DT0315_BackwardsCompat_4.log
Machine : DT0315
Product : Microsoft SQL Server Setup Support Files (English)
Product Version : 9.00.1399.06
Install : Successful
Log File : C:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\LOG\Files\SQLSetup0007_DT0315_SQLSupport_5.log
Machine : DT0315
Product : Microsoft SQL Server Native Client
Product Version : 9.00.5000.00
Install : Successful
Log File : C:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\LOG\Files\SQLSetup0007_DT0315_SQLNCLI_4.log
Machine : DT0315
Product : Microsoft Office 2003 Web Components
Product Version : 11.0.6558.0
Install : Successful
Log File : C:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\LOG\Files\SQLSetup0007_DT0315_OWC11_5.log
Machine : DT0315
Product : Microsoft SQL Server 2005 Books Online (English)
Product Version : 9.00.1399.06
Install : Successful
Log File : C:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\LOG\Files\SQLSetup0007_DT0315_BOL_1.log
Machine : DT0315
Product : Microsoft SQL Server 2005 Backward compatibility
Product Version : 8.05.1054
Install : Successful
Log File : C:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\LOG\Files\SQLSetup0007_DT0315_BackwardsCompat_5.log
Machine : DT0315
Product : Integration Services
Error : Failed to install and configure assemblies C:\Program Files\Microsoft SQL Server\90\DTS\Tasks\Microsoft.SqlServer.MSMQTask.dll in the COM+ catalog. Error: -2146233087
Error message: Unknown error 0x80131501
Error description: One or more of the components being installed are already registered as 32 bit components in the target application. You must install the 64 bit versions of the components being installed in a different COM+ application, or delete the existing
32 bit versions of the components being installed from the target COM+ application prior to attempting install of the 64 bit versions. COM+ applications cannot contain bit neutral components.
Machine : DT0315
Product : Microsoft SQL Server 2005 Integration Services (64-bit)
Product Version : 9.00.1399.06
Install : Failed
Log File : C:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\LOG\Files\SQLSetup0007_DT0315_DTS.log
Last Action : InstallFinalize
Error String : Failed to install and configure assemblies C:\Program Files\Microsoft SQL Server\90\DTS\Tasks\Microsoft.SqlServer.MSMQTask.dll in the COM+ catalog. Error: -2146233087
Error message: Unknown error 0x80131501
Error description: One or more of the components being installed are already registered as 32 bit components in the target application. You must install the 64 bit versions of the components being installed in a different COM+ application, or delete the existing
32 bit versions of the components being installed from the target COM+ application prior to attempting install of the 64 bit versions. COM+ applications cannot contain bit neutral components.
Error Number : 29549
Machine : DT0315
Product : SQLXML4
Product Version : 9.00.1399.06
Install : Successful
Log File : C:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\LOG\Files\SQLSetup0007_DT0315_SQLXML4_1.log
Machine : DT0315
Product : Microsoft SQL Server 2005 (64-bit)
Product Version : 9.00.1399.06
Install : Successful
Log File : C:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\LOG\Files\SQLSetup0007_DT0315_SQL.log
Machine : DT0315
Product : SQLXML4
Product Version : 9.00.1399.06
Install : Successful
Log File : C:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\LOG\Files\SQLSetup0007_DT0315_SQLXML4_2.log
Machine : DT0315
Product : Microsoft SQL Server 2005 Analysis Services (64-bit)
Product Version : 9.00.1399.06
Install : Successful
Log File : C:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\LOG\Files\SQLSetup0007_DT0315_AS.log
Machine : DT0315
Product : Microsoft SQL Server 2005 Notification Services (64-bit)
Product Version : 9.00.1399.06
Install : Successful
Log File : C:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\LOG\Files\SQLSetup0007_DT0315_NS.log
Machine : DT0315
Product : Microsoft SQL Server 2005 Tools (64-bit)
Product Version : 9.00.1399.06
Install : Successful
Log File : C:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\LOG\Files\SQLSetup0007_DT0315_Tools.log
SQL Server Setup failed. For more information, review the Setup log file in %ProgramFiles%\Microsoft SQL Server\90\Setup Bootstrap\LOG\Summary.txt.
Similar Messages
-
i have been tryin to dl microsoft SQL server 2005 express edition service pack 3 (KB955706) for the past 2 months and always get the same prob. it always say error code:534- window has encounter an unkown error.
i got a feelin tat it is due to the update file bein corrupted as my lenovo laptop T400 crashed once. But i m not sure. any suggestion? pls dun tell me to look at microsoft web help. totally not much help....Hello computer156,
I meant your operating system, Vista or XP? I think you problem has more to do with MS than with you machine.
Please check this site out.
Follow @LenovoForums on Twitter! Try the forum search, before first posting: Forum Search Option
Please insert your type, model (not S/N) number and used OS in your posts.
I´m a volunteer here using New X1 Carbon, ThinkPad Yoga, Yoga 11s, Yoga 13, T430s,T510, X220t, IdeaCentre B540.
TIP: If your computer runs satisfactorily now, it may not be necessary to update the system.
English Community Deutsche Community Comunidad en Español -
hi Guys,
working on below error if anyone has work around.
It is on SQL Server 2012 cluster.
The SQL Server specified in Integration Services service configuration is not present or is not available. This might occur when there is no default instance of SQL Server on the computer. For more information, see the topic "Configuring
the Integration Services Service" in SQL Server 2012 Books Online.
Please Mark As Answer if it is helpful. \\Aim To Inspire Rather to TeachHi Logicinisde,
This issue might be caused that we install named instance on the machine, or the default instance listening a different port rather than the default one.
To solve this issue, please refer to the following article for detail information:
http://blog.sql-assistance.com/index.php/there-is-no-default-instance
Regards,
Elvis Long
TechNet Community Support -
"Unable to load URL" - SQL Server 2005 DB Web Service Connection
Hi ,
I am using XCelsius version 5.0.0.99 to create dashboards connecting to SQL Server 2005.
Find below the details of the steps -
1. Created a web service within SQL Server 2005 database.
2. Copied the WSDL URL.
3. In XCelsius 2008 -> Data Manager -> Web Service Connection, pasted the URL in the WSDL URL input box and clicked "Import" to import the methods. At this point I am getting "Unable to load URL" .
Am I missing any step ?
Any suggestion would be highly appreciated.
Note : I have tested the web service by using it in a ASP.Net project and works fine.
Thanks
ChitraHi,
Error :unable to Load URL occurs" because Crystal xcelsius only support single schema web service created from Query as a web service and Flynet tool available in xcelsius 2008.
The reason:
All the web service create from Sql 2005 ,PHP script produced multiple scehma web service and crystal xcelsius only support single schema web service which can be created from Query as a web service or Flynet.
Please revert in case of any queries.
Regards
Kekti Fadnavis -
Installation issue : sql server 2008 r2 some services failed to installed on windows 7
I have been facing this problem while installing sql server 2008 r2.. i tried so many times but same result .. it shows sql server installed with some errors
database engine service : failed
SQL Server Replication : failed
Full-Text Search : failed
Analysis Services : failed
Reporting Services : failed
And my Log file (or) summary file is (it is in C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log):
Overall summary:
Final result: User cancelled
Exit code (Decimal): -2068380094
Exit facility code: 1207
Exit error code: 1602
Exit message: User has cancelled.
Start time: 2014-08-14 21:15:26
End time: 2014-08-14 21:23:58
Requested action: AddNode
Machine Properties:
Machine name: MANJU-PC
Machine processor count: 4
OS version: Windows Vista
OS service pack:
OS region: United States
OS language: English (United States)
OS architecture: x86
Process architecture: 32 Bit
OS clustered: No
Product features discovered:
Product Instance Instance ID
Feature Language
Edition Version Clustered
Sql Server 2008 MSSQLSERVER MSSQL10.MSSQLSERVER Database Engine Services
1033 10.0.1600.22
No
Sql Server 2008 MSSQLSERVER MSSQL10.MSSQLSERVER SQL Server Replication
1033 10.0.1600.22
No
Sql Server 2008 MSSQLSERVER MSSQL10.MSSQLSERVER Full-Text Search
1033 10.0.1600.22
No
Sql Server 2008 MSSQLSERVER MSAS10.MSSQLSERVER Analysis Services
1033 10.0.1600.22
No
Sql Server 2008 MSSQLSERVER MSRS10.MSSQLSERVER Reporting Services
1033 10.0.1600.22
No
Sql Server 2008
Management Tools - Basic 1033 Developer Edition
10.0.1600.22 No
Sql Server 2008
Management Tools - Complete 1033 Developer Edition 10.0.1600.22
No
Sql Server 2008
Client Tools Connectivity 1033 Developer Edition 10.0.1600.22
No
Sql Server 2008
Client Tools Backwards Compatibility 1033 Developer Edition 10.0.1600.22 No
Sql Server 2008
Client Tools SDK 1033
Developer Edition 10.0.1600.22 No
Sql Server 2008
Integration Services 1033 Developer Edition
10.0.1600.22 No
Package properties:
Description: SQL Server Database Services 2008
SQLProductFamilyCode: {628F8F38-600E-493D-9946-F4178F20A8A9}
ProductName: SQL2008
Type: RTM
Version: 10
SPLevel: 0
Installation location: D:\Softwares\JAVA & .NET SW\SQL Server 2008\SQL Server 2008\x86\setup\
Installation edition: DEVELOPER
User Input Settings:
ACTION: AddNode
AGTSVCACCOUNT: <empty>
AGTSVCPASSWORD: *****
ASSVCACCOUNT: <empty>
ASSVCPASSWORD: *****
CONFIGURATIONFILE:
FAILOVERCLUSTERGROUP:
FAILOVERCLUSTERNETWORKNAME: <empty>
FTSVCACCOUNT: <empty>
FTSVCPASSWORD: *****
HELP: False
INDICATEPROGRESS: False
INSTANCENAME: <empty>
MEDIASOURCE: D:\Softwares\JAVA & .NET SW\SQL Server 2008\SQL Server 2008\
PID: *****
QUIET: False
QUIETSIMPLE: False
SQLSVCACCOUNT: <empty>
SQLSVCPASSWORD: *****
X86: False
Configuration file: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20140814_210558\ConfigurationFile.ini
Detailed results:
Feature: Integration Services
Status: Failed: see logs for details
MSI status: Passed
Configuration status: Passed
Feature: Client Tools Connectivity
Status: Failed: see logs for details
MSI status: Passed
Configuration status: Passed
Feature: Management Tools - Complete
Status: Failed: see logs for details
MSI status: Passed
Configuration status: Passed
Feature: Management Tools - Basic
Status: Failed: see logs for details
MSI status: Passed
Configuration status: Passed
Feature: Client Tools SDK
Status: Failed: see logs for details
MSI status: Passed
Configuration status: Passed
Feature: Client Tools Backwards Compatibility
Status: Failed: see logs for details
MSI status: Passed
Configuration status: Passed
Feature: Business Intelligence Development Studio
Status: Failed: see logs for details
MSI status: Passed
Configuration status: Passed
Rules with failures:
Global rules:
There are no scenario-specific rules.
Rules report file: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20140814_210558\SystemConfigurationCheck_Report.htm
Exception summary:
The following is an exception stack listing the exceptions in outermost to innermost order
Inner exceptions are being indented
Exception type: Microsoft.SqlServer.Chainer.Infrastructure.CancelException
Message:
User has cancelled.
Stack:
at Microsoft.SqlServer.Configuration.UIExtension.Request.Wait()
at Microsoft.SqlServer.Configuration.UIExtension.UserInterfaceProxy.SubmitAndWait(Request request)
at Microsoft.SqlServer.Configuration.UIExtension.UserInterfaceProxy.NavigateToWaypoint(String moniker)
at Microsoft.SqlServer.Configuration.UIExtension.UserInterfaceService.Waypoint(String moniker)
at Microsoft.SqlServer.Configuration.UIExtension.WaypointAction.ExecuteAction(String actionId)
at Microsoft.SqlServer.Chainer.Infrastructure.Action.Execute(String actionId, TextWriter errorStream)
at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.InvokeAction(WorkflowObject metabase, TextWriter statusStream)
at Microsoft.SqlServer.Setup.Chainer.Workflow.PendingActions.InvokeActions(WorkflowObject metaDb, TextWriter loggingStream)Requested action: AddNode
OS architecture: x86
Process architecture: 32 Bit
OS clustered: No
Product features discovered:
Product Instance Instance ID
Feature Language
Edition Version Clustered
Sql Server 2008 MSSQLSERVER MSSQL10.MSSQLSERVER Database Engine Services
1033 10.0.1600.22
No
Sql Server 2008 MSSQLSERVER MSSQL10.MSSQLSERVER SQL Server Replication
1033 10.0.1600.22
No
Sql Server 2008 MSSQLSERVER MSSQL10.MSSQLSERVER Full-Text Search
1033 10.0.1600.22
No
Sql Server 2008 MSSQLSERVER MSAS10.MSSQLSERVER Analysis Services
1033 10.0.1600.22
No
Sql Server 2008 MSSQLSERVER MSRS10.MSSQLSERVER Reporting Services
1033 10.0.1600.22
No
Sql Server 2008
Management Tools - Basic 1033 Developer Edition
10.0.1600.22 No
Sql Server 2008
Management Tools - Complete 1033 Developer Edition 10.0.1600.22
No
Sql Server 2008
Client Tools Connectivity 1033 Developer Edition 10.0.1600.22
No
Sql Server 2008
Client Tools Backwards Compatibility 1033 Developer Edition 10.0.1600.22 No
Sql Server 2008
Client Tools SDK 1033
Developer Edition 10.0.1600.22 No
Sql Server 2008
Integration Services 1033 Developer Edition
10.0.1600.22 No
Instead of installing SQL server instance you selected add node which is to be selected when SQL server installation is to be made on Node which is being added to cluster. Since your OS is not clustered I am sure you selected worng option.
Please right click on setup file and select run as administrator. Now installation window which pops up on that on left hand side select
installation and then on page that appears select 'New server standalone installation or add feature to existing installation'.
You already have SQL server 2008 installed on your machine as per feature discovery report
Please mark this reply as answer if it solved your issue or vote as helpful if it helped so that other forum members can benefit from it.
My TechNet Wiki Articles -
SQL server 2005 problem with service starting
I am having a problem starting my sqlserver service. It will not start and therefore i have no access to my sql 2005 server database. This is what in the event log. This database was working fine until i had two drives kill over in a RAID configuration.
The striping went out with a hitch and no i want to see if anyone have any ideas before i perform a restore. Do i need to run SQL server repair with the installation disk?Well from viewing the log it looks like i am in a pickle. Since the SQL service won't start, is there a command or script to run for a database check using powershell? Since it looks like i will be doing a restore, just curious now.
2014-01-16 15:27:58.30 spid5s Starting up database 'master'.
2014-01-16 15:27:59.81 spid5s Error: 824, Severity: 24, State: 2.
2014-01-16 15:27:59.81 spid5s SQL Server detected a logical consistency-based I/O error: incorrect pageid (expected 1:363; actual 0:0). It occurred during a read of page (1:363) in database ID 1 at offset 0x000000002d6000 in file
'W:\Microsoft SQL Server\MSSQL.1\MSSQL\DATA\master.mdf'. Additional messages in the SQL Server error log or system event log may provide more detail. This is a severe error condition that threatens database integrity and must be corrected immediately.
Complete a full database consistency check (DBCC CHECKDB). This error can be caused by many factors; for more information, see SQL Server Books Online.
2014-01-16 15:27:59.81 spid6s Error: 922, Severity: 14, State: 1.
2014-01-16 15:27:59.81 spid6s Database 'master' is being recovered. Waiting until recovery is finished.
2014-01-16 15:27:59.81 spid6s System Task System Task produced an error that was not handled. Major: 9, Minor: 22, Severity:14, State:1
2014-01-16 15:27:59.81 spid5s Error: 3313, Severity: 21, State: 2.
2014-01-16 15:27:59.81 spid5s During redoing of a logged operation in database 'master', an error occurred at log record ID (2369:160:2). Typically, the specific failure is previously logged as an error in the Windows Event Log
service. Restore the database from a full backup, or repair the database.
2014-01-16 15:27:59.81 spid5s Cannot recover the master database. SQL Server is unable to run. Restore master from a full backup, repair it, or rebuild it. For more information about how to rebuild the master database, see SQL
Server Books Online. -
BPEL process with simple sql server select db adapter service fails ORABPEL
I have a simple db adapter service that simply runs a select statement. The process accepts 2 parms and returns a single code of 1 or zero.
It fails with ORABPEL-11633
Here is the instance log info:
[2008/12/09 14:50:53] "{http://schemas.oracle.com/bpel/extension}bindingFault" has been thrown.less
-<bindingFault xmlns="http://schemas.oracle.com/bpel/extension">
-<part name="code">
<code>0
</code>
</part>
-<part name="summary">
<summary>
file:/D:/app/oracle/product/10.1.3/soa_1/bpel/domains/default/tmp/.bpel_SIPA_DCSDFeesActivated_100.1_ab58cb9f275f2bd71f38fced5775233f.tmp/icProd.wsdl [ icProd_ptt::icProd(icProdInput_msg,icProdOutputCollection) ] - WSIF JCA Execute of operation 'icProd' failed due to: Pure SQL Exception.
Pure SQL Execute of select portaloptions.fees from ictest.dbo.schoolyear schoolyear, ictest.dbo.calendar calendar, ictest.dbo.enrollment enrollment, ictest.dbo.person person, ictest.dbo.portaloptions portaloptions, ictest.dbo.[identity] i where schoolyear.endyear =calendar.endyear and schoolyear.active = 1 and calendar.calendarid = enrollment.calendarid and enrollment.personid = person.personid and person.studentnumber = ? and person.personid =i.personid and i.birthdate= ? and portaloptions.fees = 1 and portaloptions.schoolid = calendar.schoolid failed. Caused by com.microsoft.sqlserver.jdbc.SQLServerException: The index 2 is out of range..
; nested exception is:
ORABPEL-11633
Pure SQL Exception.
Pure SQL Execute of select portaloptions.fees from ictest.dbo.schoolyear schoolyear, ictest.dbo.calendar calendar, ictest.dbo.enrollment enrollment, ictest.dbo.person person, ictest.dbo.portaloptions portaloptions, ictest.dbo.[identity] i where schoolyear.endyear =calendar.endyear and schoolyear.active = 1 and calendar.calendarid = enrollment.calendarid and enrollment.personid = person.personid and person.studentnumber = ? and person.personid =i.personid and i.birthdate= ? and portaloptions.fees = 1 and portaloptions.schoolid = calendar.schoolid failed. Caused by com.microsoft.sqlserver.jdbc.SQLServerException: The index 2 is out of range..
The Pure SQL option is for border use cases only and provides simple yet minimal functionality. Possibly try the "Perform an operation on a table" option instead.
</summary>
</part>
-<part name="detail">
<detail>The index 2 is out of range.
</detail>
</part>
</bindingFault>
Edited by: Golden Lego on Dec 9, 2008 2:15 PMThe BindingFault means that it can not pass the parameters to the SQL query or vice versa. Check if the XSD that is generated with your custome query is correct and that the data-type are correct.
Marc
http://orasoa.blogspot.com -
Everytime windows update downloads this it fails.
Solved!
Go to Solution.Download for SQL express SP3
Cheers and regards,
• » νιנαソѕαяα∂нι ѕαмανє∂αм ™ « •
●๋•کáŕádhí'ک díáŕý ツ
I am a volunteer here. I don't work for Lenovo -
Security Update for SQL Server 2005 SP3 (KB2494113) failed
Here is the Error, Can't get the update install, please help.
KB Number: KB2494113
Machine: MJA01
OS Version: Server 4.0 Service Pack 1 (Build 7601)
Package Language: 1033 (ENU)
Package Platform: x86
Package SP Level: 3
Package Version: 4060
Command-line parameters specified:
Cluster Installation: No
Prerequisites Check & Status
SQLSupport: Passed
Products Detected Language Level Patch Level Platform Edition
SQL Server Database Services 2005 (BKUPEXEC) ENU SP3 2005.090.4035.00 x86 EXPRESS
SQL Server Tools and Workstation Components 2005 ENU SP2 9.2.3042 x86 EXPRESS
Products Disqualified & Reason
Product Reason
SQL Server Tools and Workstation Components 2005 The product instance SQL Tools does not have prerequisite update 4035 installed. Update 4060 is dependent on prerequisite update 4035. Exit setup and refer to the Knowledge Base article to find the prerequisite
patch. Install the prerequisite and rerun the installation.
Processes Locking Files
Process Name Feature Type User Name PID
Product Installation Status
Product : SQL Server Database Services 2005 (BKUPEXEC)
Product Version (Previous): 4035
Product Version (Final) :
Status : Failure
Log File : C:\Program Files (x86)\Microsoft SQL Server\90\Setup Bootstrap\LOG\Hotfix\SQL9_Hotfix_KB2494113_sqlrun_sql.msp.log
SQL Express Features :
Error Number : 29528
Error Description : MSP Error: 29528 The setup has encountered an unexpected error while Setting Internal Properties. The error is: Fatal error during installation.
Product : SQL Server Tools and Workstation Components 2005
Product Version (Previous): 3042
Product Version (Final) :
Status : NA
Log File :
SQL Express Features :
Error Description : The product instance SQL Tools does not have prerequisite update 4035 installed. Update 4060 is dependent on prerequisite update 4035. Exit setup and refer to the Knowledge Base article to find the prerequisite
patch. Install the prerequisite and rerun the installation.
Summary
One or more products failed to install, see above for details
Exit Code Returned: 29528Hi Bhanu,
I have uninstall the SQL Server Tools and Workstation Components 2005.
But still unable to upg the SQL Server with the KB249411. Any more ideas?
This is the Summary log.
Time: 09/10/2014 11:09:48.218
KB Number: KB2494113
Machine: MJA01
OS Version: Server 4.0 Service Pack 1 (Build 7601)
Package Language: 1033 (ENU)
Package Platform: x86
Package SP Level: 3
Package Version: 4060
Command-line parameters specified:
Cluster Installation: No
Prerequisites Check & Status
SQLSupport: Passed
Products Detected Language Level Patch Level Platform Edition
SQL Server Database Services 2005 (BKUPEXEC) ENU SP3 2005.090.4035.00 x86 EXPRESS
Products Disqualified & Reason
Product Reason
Processes Locking Files
Process Name Feature Type User Name PID
Product Installation Status
Product : SQL Server Database Services 2005 (BKUPEXEC)
Product Version (Previous): 4035
Product Version (Final) :
Status : Failure
Log File : C:\Program Files (x86)\Microsoft SQL Server\90\Setup Bootstrap\LOG\Hotfix\SQL9_Hotfix_KB2494113_sqlrun_sql.msp.log
SQL Express Features :
Error Number : 29528
Error Description : MSP Error: 29528 The setup has encountered an unexpected error while Setting Internal Properties. The error is: Fatal error during installation.
Summary
One or more products failed to install, see above for details
Exit Code Returned: 29528
Here is what is log in the SQL9_Hotfix_KB2494113_sqlrun_sql.msp.log
Property(S): CommonFilesFolder.D9BC9C10_2DCD_44D3_AACC_9C58CAF76128 = C:\Program Files (x86)\Common Files\
MSI (s) (B8:F0) [11:09:39:826]: Product: Microsoft SQL Server 2005 Express Edition - Update 'GDR 4060 for SQL Server Database Services 2005 ENU (KB2494113)' could not be installed. Error code 1603. Additional information is available in the log file C:\Program
Files (x86)\Microsoft SQL Server\90\Setup Bootstrap\LOG\Hotfix\SQL9_Hotfix_KB2494113_sqlrun_sql.msp.log.
MSI (s) (B8:F0) [11:09:39:827]: Windows Installer installed an update. Product Name: Microsoft SQL Server 2005 Express Edition. Product Version: 9.3.4035.00. Product Language: 1033. Manufacturer: Microsoft Corporation. Update Name: GDR 4060 for SQL Server Database
Services 2005 ENU (KB2494113). Installation success or error status: 1603.
MSI (s) (B8:F0) [11:09:39:828]: Note: 1: 1729
MSI (s) (B8:F0) [11:09:39:828]: Product: Microsoft SQL Server 2005 Express Edition -- Configuration failed.
MSI (s) (B8:F0) [11:09:39:829]: Windows Installer reconfigured the product. Product Name: Microsoft SQL Server 2005 Express Edition. Product Version: 9.3.4035.00. Product Language: 1033. Manufacturer: Microsoft Corporation. Reconfiguration success or error
status: 1603.
MSI (s) (B8:F0) [11:09:39:829]: Attempting to delete file C:\Windows\Installer\63906e.msp
MSI (s) (B8:F0) [11:09:39:829]: Unable to delete the file. LastError = 32
MSI (s) (B8:F0) [11:09:40:092]: Deferring clean up of packages/files, if any exist
MSI (s) (B8:F0) [11:09:40:092]: Attempting to delete file C:\Windows\Installer\63906e.msp
MSI (s) (B8:F0) [11:09:40:094]: MainEngineThread is returning 1603
MSI (s) (B8:6C) [11:09:40:097]: RESTART MANAGER: Session closed.
MSI (s) (B8:6C) [11:09:40:097]: No System Restore sequence number for this installation.
=== Logging stopped: 9/10/2014 11:09:39 ===
MSI (s) (B8:6C) [11:09:40:098]: User policy value 'DisableRollback' is 0
MSI (s) (B8:6C) [11:09:40:098]: Machine policy value 'DisableRollback' is 0
MSI (s) (B8:6C) [11:09:40:098]: Incrementing counter to disable shutdown. Counter after increment: 0
MSI (s) (B8:6C) [11:09:40:098]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Installer\Rollback\Scripts 3: 2
MSI (s) (B8:6C) [11:09:40:098]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Installer\Rollback\Scripts 3: 2
MSI (s) (B8:6C) [11:09:40:098]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Installer\InProgress 3: 2
MSI (s) (B8:6C) [11:09:40:098]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Installer\InProgress 3: 2
MSI (s) (B8:6C) [11:09:40:098]: Decrementing counter to disable shutdown. If counter >= 0, shutdown will be denied. Counter after decrement: -1
MSI (s) (B8:6C) [11:09:40:099]: Restoring environment variables
MSI (s) (B8:6C) [11:09:40:099]: Destroying RemoteAPI object.
MSI (s) (B8:30) [11:09:40:099]: Custom Action Manager thread ending.
MSI (c) (FC:60) [11:09:40:100]: Decrementing counter to disable shutdown. If counter >= 0, shutdown will be denied. Counter after decrement: -1
MSI (c) (FC:60) [11:09:40:101]: MainEngineThread is returning 1603
Thanks,
Alice -
Error when creating a FDM application on SQL Server 2005
Hi,
we are getting this error when creating a FDM application on SQL Server 2005
Error: EPMCSS-07003: Failed to validate identity. Invalid identity . Check identity.[SET_ROLES_LIST]
We are using Windows System Integration although we have also tested with sa user.
Any ideas?
ThanksBased on the error message it appears to be having a Shared Services issue. Verify that the "ADMIN" account is being used for the HSS connection and that you are using "ADMIN" to create the application and see if the same error is returned.
-
SQL Server 2005 agent job runs a SSIS package ( Analysis Services Processing Task) fails
Hi,
SQL Server 2005 standard edition.
I have a SSIS package which has a Analysis Services Processing Task. I have tested the package in BIDS and it runs ok. But when I created a agent job and run it from the job it reports error:
Code: 0xC0012024 Source: Analysis Services Processing Task Description: The task "Analysis Services Processing Task" cannot run on this edition of Integration Services.
It requires a higher level edition.
This is the result of select @@version
Microsoft SQL Server 2005 - 9.00.4035.00 (Intel X86) Nov 24 2008 13:01:59 Copyright (c) 1988-2005 Microsoft Corporation Standard Edition on Windows NT 5.2 (Build 3790: Service Pack 1)
Any idea?Hi,
SQL Server 2005 standard edition.
I have a SSIS package which has a Analysis Services Processing Task. I have tested the package in BIDS and it runs ok. But when I created a agent job and run it from the job it reports error:
Code: 0xC0012024 Source: Analysis Services Processing Task Description: The task "Analysis Services Processing Task" cannot run on this edition of Integration Services. It
requires a higher level edition.
This is the result of select @@version
Microsoft SQL Server 2005 - 9.00.4035.00 (Intel X86) Nov 24 2008 13:01:59 Copyright (c) 1988-2005 Microsoft Corporation Standard Edition on Windows NT 5.2 (Build 3790: Service Pack 1)
Any idea?
Anyway, I have found a work around:
http://technet.microsoft.com/en-us/library/ff929186.aspx -
Hi All,
Here the linked server is created between sql server 2012 64 bit and sql server 2005 32 bit. I am getting the below error when i try to access linked server from third server. I have created linked from Instance 1 to Instance 2. When i access it from
instance 3 i am getting the below error. SPN setting has been done between these 2 servers. Also the option 'Trust the delegate' is enabled for the both the service account.
'Login Failed for user 'NT AUTHORITY\ANONYMOUS LOGON'
Appreciate your quick response.
Vikas.M.SHello,
Please read the following resources:
http://www.databasejournal.com/features/mssql/article.php/3696506/Setting-Up-Delegation-for-Linked-Servers.htm
http://social.msdn.microsoft.com/Forums/sqlserver/en-US/ea26de43-4c6b-4991-86d7-e1578f107c92/linked-server-login-failed-for-user-nt-authorityanonymous-logon?forum=sqldataaccess
Hope this helps.
Regards,
Alberto Morillo
SQLCoffee.com -
Setup failed for SQL Server 2005 express edition [SQLEXPR.exe]
Good day All,
My client has already SQL Server 2005 SP3 installed. We are in process of providing him a new .net application but he wants existing version of SQL untouched. We asked him to install SQL Express version (SQLEXPR.exe) and configured web.config to local (.\SQLExpress).
However client is getting message -
"Setup failed.
For help, click: http://go.microsoft.com/fwlink?LinkID=20476&ProdName=Microsoft+SQL+Server&ProdVer=9.00.4035.00&EvtSrc=setup.rll&EvtID=50000&EvtType=sharedsetup%5csharedsetupactions.cpp%40LoadResourcesAction%40sqls%3a%3aLoadResourcesAction%3a%3aperform%400x0"
I am in a fix. What could have gone wrong? Clearly it has something to with already existing version. Just for information, client keeps his SQL services (using SQL Server Configuration Manager) in a stopped state. Could that be an issue?
Appreciate any one helping me out.
Thanks
SandeepbwesGood Day dave_gona
Received the log :
Microsoft SQL Server 2005 Setup beginning at Mon Apr 20 16:39:44 2015
Process ID : 9756
e:\6f54eb72f88682db6222c7ed4d9c6643\setup.exe Version: 2005.90.1399.0
Running: LoadResourcesAction at: 2015/3/20 16:39:44
Complete: LoadResourcesAction at: 2015/3/20 16:39:44, returned true
Running: ParseBootstrapOptionsAction at: 2015/3/20 16:39:44
Loaded DLL:e:\6f54eb72f88682db6222c7ed4d9c6643\xmlrw.dll Version:2.0.3604.0
Complete: ParseBootstrapOptionsAction at: 2015/3/20 16:39:44, returned true
Running: ValidateWinNTAction at: 2015/3/20 16:39:44
Complete: ValidateWinNTAction at: 2015/3/20 16:39:44, returned true
Running: ValidateMinOSAction at: 2015/3/20 16:39:44
Complete: ValidateMinOSAction at: 2015/3/20 16:39:44, returned true
Running: PerformSCCAction at: 2015/3/20 16:39:44
Complete: PerformSCCAction at: 2015/3/20 16:39:44, returned true
Running: ActivateLoggingAction at: 2015/3/20 16:39:44
Complete: ActivateLoggingAction at: 2015/3/20 16:39:44, returned true
Running: DetectPatchedBootstrapAction at: 2015/3/20 16:39:44
Complete: DetectPatchedBootstrapAction at: 2015/3/20 16:39:44, returned true
Running: LaunchPatchedBootstrapAction at: 2015/3/20 16:39:44
Error: Action "LaunchPatchedBootstrapAction" threw an exception during execution. Error information reported during run:
"C:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\setup.exe" finished and returned: 1603
Aborting queue processing as nested installer has completed
Message pump returning: 1603 -
Unable to start SQL Server Browser service in Sql server 2005
we are unable to start the SQL browser service on one of our machine with below error.
I believe this to be the reason, why we could not connect to the instance with below error
I tried troubleshooting as mentioned here, by changing
value in registry from 1 to 0, but still no luck.
SQLservices are also running.
Please help on how to resolve this!Hello,
You say that SQL Server Browser Service belongs to a SQL Server 2005, but based on the name of the instance is a SQL Server
2012 instance.
Do you have any issues installing/uninstalling SQL Server 2005 or 2012? One of them 32-bit and the other 64-bit?
Hope this helps.
Regards,
Alberto Morillo
SQLCoffee.com -
Error"Failed to open the connection" - Named Instance of SQL Server 2005
"Failed to open the connection" error, when connecting to the Named Instance of SQL Server 2005
The report is throwing error, when changing the logon information dynamically through C#.
Code
string reportPath = @"D:\NET\TestReport\TestReport.rpt";
ReportDocument reportDocument = new ReportDocument();
reportDocument.Load(reportPath);
foreach(CrystalDecisions.CrystalReports.Engine.Table table in tables)
TableLogOnInfo tableLogonInfo = table.LogOnInfo;
tableLogonInfo.ConnectionInfo.ServerName = @"TestServer\Instance1"; //Connnecting to Named instance of SQL Server 2005
tableLogonInfo.ConnectionInfo.UserID = "sa";
tableLogonInfo.ConnectionInfo.Password = "password";
tableLogonInfo.ConnectionInfo.DatabaseName = "TEST_DB";
table.ApplyLogOnInfo(tableLogonInfo);
crystalReportViewer1.ReportSource = reportDocument;
Error Message
Failed to open the connection.
Failed to open the connection.
C:\DOCUME1\PUGALE1\LOCALS~1\Temp\{DF9593A5-5C80-4CBC-ABC3-EC4EF204A7EB}.rpt
The error is occuring only whenever i am connecting to the Named Instance of SQL Server 2005.
Thanks in Advance
Edited by: pugalendran p on Feb 2, 2009 10:32 AM
Edited by: pugalendran p on Feb 2, 2009 10:43 AMHi,
Following solution might help you to resolve the issue.
Solution1:
Issue happens because universe connection to the Database is not responding and the Data Source Name is not configured to write SQL Server 2005 database.
Resolution
Created new DSN connection under SYSTEM DSN to SQL Server 2005 Database.
Import the universe from the designer.
Go to File->Parameters.
Edit Connection.
On the Database Middleware Page expand SQl Server 2005->Select SQL Server 2005 driver.
Change the DSN to new DSN connection
Test the connection.
Save the Universe and Export it to the repository.
Solution2:
I am taking Oracle as an example over here.
This can be caused when the SQLNET.ora is located in a remote location using mapped drives.
Resolution
To resolve,
check the registry [HKLM\SOFTWARE\ORACLE] you should see a folder called HOME0
look for any paths that contain a mapped drive partition
Change the mapped drive letter to a UNC path (
server\folder)
Open a command prompt and do a tnsping using the tnsname and verify the location of the SQLNET.ora or TNSNAMES.ora
If the path is not updated to the new path
Reboot the server
Regards,
Sarbhjeet Kaur
Maybe you are looking for
-
Unable to create datawarehouse tables using DAC client
Hi, We are facing error while creating data warehouse tables in DAC Client. Please find the below mentioned error message ===================================== STD OUTPUT ===================================== CREATING SIEBEL DATABASE OBJECTS F:\DAC\b
-
HT4972 my ipad switched to German! How do I get it back to English?
My iPad switched to German while I was synching it to my computer. How do i get it back to English?
-
Well I finally have Debian installed on the G3 iMac and everything seems to be working good except for a ripple effect when I drag a window or scroll up & down in the browser. It looks like a wavy motion or ripple. Do anybody know a solution? I've ha
-
Using SORT function in mapping
Hi, I am having trouble getting my head around using the SORT function. My interface is IDOC to File, The IDOC has a repeating segment (PAYLOAD) that can be of 3 types, either type A, B or C (this is set using a "TYPE" field). In my file structure I
-
RFC comparing Purchase Order from server D10 and compare the PO E10 server
Hi Gurus, I want to fetch data of Purchase order from D10 system client 058 and compare whether the same Purchaser order is also present in E10 system clilent 078. Please send me the sample code how to retrieve the code from different servers using R