SQL Server 2008 & 2012 Database backup on a shared loaction

Hi,
I have to plan for the Database backup on SQL Server 2008 & 2012 on a shared Path.
We are building a new Maintenance plan &  specify the Database which needs to be backup & at the Folder location we specify the Shared Path Location. These steps I have followed using the below link,
http://social.msdn.microsoft.com/Forums/en-US/be138ca3-4b2f-4464-8115-9a0a6f2e0fe6/sql-database-backup-on-network-share-using-maintenance-plan?forum=sqldatabasemirroring
But the operation fails & throws the below error:
Message
Executed as user Microsoft (R) SQL Server Execute Package Utility  Version 10.50.1600.1 for 64-bit  Copyright (C) Microsoft Corporation 2010. All rights reserved.    Started:  12:27:17 PM  Progress: 2014-02-13 12:27:19.13    
Source: {B6CEBA00-4BD1-4931-AF23-B633BEDBEE4A}      Executing query "DECLARE @Guid UNIQUEIDENTIFIER      EXECUTE msdb..sp...".: 100% complete  End Progress  Error: 2014-02-13 12:27:20.63    
Code: 0xC002F210     Source: Back Up Database Task Execute SQL Task     Description: Executing the query "BACKUP DATABASE DB TO  DISK ..." failed with the following error: "Cannot open backup device
'\\DBBackup\SharePoint_backup\DB_backup_2014_02_13_122719_5314660.bak'. Operating system error 5(Access is denied.).  BACKUP DATABASE is terminating abnormally.". Possible failure reasons: Problems with the query, "ResultSet" property not
set correctly, parameters not set correctly, or connection not established correctly.  End Error  DTExec: The package execution returned DTSER_FAILURE (1).  Started:  12:27:17 PM  Finished: 12:27:20 PM  Elapsed:  2.843 seconds. 
The package execution failed.  The step failed.
Note: But when I open the shared path in the Windows Explorer it opens successfully.
Regards,
Purvish Shah

Hello,
>>'\\DBBackup\SharePoint_backup\DB_backup_2014_02_13_122719_5314660.bak'. Operating system error 5(Access is denied.). 
This clearly points out to fact that your SQL Server service account does not have permission of read/write on shared location,simple.
>>But when I open the shared path in the Windows Explorer it opens successfully.
This is because when you are browsing through explorer your windows login credential is used to access that folder but when you are running backup your SQL Server service account permission is used to write backup on shared folder ( which I assume it does
not have ) so the access denied error.
Hope this helps
PS: I reffered the link its maily how you specify backup path its not about access denied error due to SQL server service acount not having privilege
Please mark this reply as the answer or vote as helpful, as appropriate, to make it useful for other readers

Similar Messages

  • How to connect java project to sql server 2008 r2 database

    i want to create an java application which has to create a database and later access it. My problem is that i am not able to connect sql server 2008 r2 database driver on to the netbeans.i have sql server 2008 r2 installed on my system.please
    suggest me the step by step procedure to establish the connection

    Hi ENG,
    To establish a connection to SQL Server from a Java project, you have to download the JDBC driver for SQL Server from
    here.
    After extracting the jar files(like sqljdbc.jar) from the above link, add the driver to the netbeansIDE.
    Test establishing a connection with the below Java Class.
    import java.sql.*;
    public class Test {
    public static void main(String[] srg) {
    String driverName = "com.microsoft.sqlserver.jdbc.SQLServerDriver"; //load the jdbc driver
    String dbURL = "jdbc:sqlserver://localhost:1433; DatabaseName=test"; //connection string to the db hosted on localhost
    String userName = "sa"; //user name
    String userPwd = "123456"; //password
    Connection dbConn;
    try {
    Class.forName(driverName);
    dbConn = DriverManager.getConnection(dbURL, userName, userPwd);
    System.out.println("Connection Successful!"); //print Connection Successful! if connection establishes
    } catch (Exception e) {
    e.printStackTrace();
    A demonstration video from Youtube for you reference.
    Connect NetBeans Project with Microsoft SQL Server 2008 - YouTube
    Since this is a question regarding Java, I suggest you post your subsequent questions to a java dedicated forum. It is appropriate and more experts will assist you.
    If you have any question, feel free to let me know.
    Eric Zhang
    TechNet Community Support

  • SQL Server 2008 / 2012 - Best practices document

    Hello Everyone
    Can anybody share SQL Server 2008 / 2012 - Best practices.
    Regards
    Prashanth
    SharePoint Administrator

    Take a look here:
    http://channel9.msdn.com/Series/Tuning-SQL-Server-2012-for-SharePoint-2013/Tuning-SQL-Server-2012-for-SharePoint-2013-01-Key-SQL-Server-and-SharePoint-Server-Integration-Conce (4 part video series)
    https://technet.microsoft.com/en-us/library/hh292622.aspx
    Trevor Seward
    Follow or contact me at...
    &nbsp&nbsp
    This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

  • Sharepoint 2013 SSRS Interaction with Sql Server 2012 Reporting Services connecting to Sql Server 2008 R2 database

    Hi
    I'm working on upgrading sharepoint 2010 to sharepoint 2013 with sql server 2008 r2. I've ran into some problems but have been able to get a test farm upgraded. However to run SSRS 2013 it seems Sql Server 2012 Reporting Services are required. Upgrading
    to a full sql server 2012 database isn't an option. I know that sql server 2012 reporting services can use sql server 2008 r2 as a catalog and content database so I was wondering could this be a workaround? Importantly would I need a separate machine/virtual
    machine to host sql server 2012 reporting services? or could it live on the sql server 2008 r2 machine? Any pointers appreciated. Thanks Dan

    Remember that SSRS must be deployed on the SharePoint server. Having said that, yes you can install SSRS 2012 SP1 on a server running SQL 2008 R2. And yes, you can use 2008 R2 as your Database Engine server while SSRS 2012 SP1 runs on the SharePoint server.
    Trevor Seward
    Follow or contact me at...
    &nbsp&nbsp
    This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

  • SQL Server 2008 R2-Database Curruption

    Dear Sir,
    I have a licensed SQL Server 2008 R2 and i found that my database get corrupted and showing error-message.
    Request you to please give me solution for this error.
    error,
    "Msg 211, Level 23, State 3, Line 1
    Possible schema corruption. Run DBCC CHECKCATALOG.
    Msg 0, Level 20, State 0, Line 0
    A severe error occurred on the current command.  The results, if any, should be discarded."
    Regards
    Keshav

    It looks like that some table in your database has got corrupted.
    Run:
    DBCC CHECKCATALOG
    DBCC CHECKDB (Databasename) with no_infomsgs,all_errormsgs
    Check if it returns any consistency errors!!
    If DBCC checkdb is unable to repair then use backups.
    Have any recent changes made to any table in terms of schema change, data type modification etc..?
    Do you have valid database backup file with you before this issue occurred? If yes, then restore the database using that backup file.
    If not, then create a new database and try importing as much data as possible or if you can identify the culprit table, probably you try dropping & recreating that particular table. 
    Refer:
    http://www.sqlskills.com/blogs/paul/teched-demo-corruptions-fatal-to-dbcc-checkdb/
    http://data-base-recovery.blogspot.in/2012/08/how-to-fix-possible-schema-corruption.html

  • SQL Server 2008/2012 Express Connection Problem

    Hello,
    since a couple of days I'm working on a problem with the SQL Server Express (32-Bit as well as 64Bit).
    I installed a new SQL Server 2008 with an instance named SQL2012 and the Management Studio 2008 R2 on the same machine. I easily am abled to connect to the Server using the Management Studio with several Server Name settings (localhost, IP, (local), .\SQL2012).
    Now I have a self-written programm (C#) wich should connect to the Server, but it does not work. It is definitely not a problem of the programm code because the same programm is abled to connect to a SQL Server 2008 Enterprise Edition. Similar Problem with
    the 2012 Express Version (2012 Enterprise not tested).
    The connection string I use and wich is working with connecting on the Enterprise Edition is: Server=Servername\Instance;Database=DatabaseName;User Id=user;Password=password;
    Anybody any solution why the Express-Version refuses to connect?
    (Sorry if I have made several failures in my text, English is not my native language)

    It Occurs when I try to ping.Send the Server to see if he is active. If I skip this step and try to connect directly to the server (con.Open()) I get the exception:
    A network-related or instance-specific error occurred while establishing a connection to SQL Server. The
    server was not found or it can not be accessed. Verify that the instance name is correct and that SQL Server allows remote connections. (provider: Named Pipes Provider, error: 40 - Connection with the SQL Server couldn't be opened)

  • Resore SQL server 2008 SP3 database to SQL server 2008 R2 SP1

    I have a dump from a SQL server 2008 SP3 server and I'm trying to restore it to SQL server 2008 R2 SP1 server but getting the error:
    Msg 3241, Level 16, State 0, Line 2
    The media family on device 'E:\Work\backup.bak0' is incorrectly formed. SQL Server cannot process this media family.
    Msg 3013, Level 16, State 1, Line 2
    RESTORE FILELIST is terminating abnormally.
    Are these versions incompatible or is it just a problem with the file? If they are incompatible, I could upgrade my target server to SQL server 2008 R2 SP2, would this help?
    The exact version info is as follows:
    Source server: Microsoft SQL Server 2008 (SP3) - 10.0.5500.0 (X64)   Sep 21 2011 22:45:45   Copyright (c) 1988-2008 Microsoft Corporation  Standard Edition (64-bit) on Windows NT 5.2 <X64> (Build 3790: Service Pack 2)
    Target Server:  Microsoft SQL Server 2008 R2 (RTM) - 10.50.1617.0 (X64)   Apr 22 2011 19:23:43   Copyright (c) Microsoft Corporation  Developer Edition (64-bit) on Windows NT 6.1 <X64> (Build 7601: Service Pack 1)
    Thanks in advance for your help.

    SQL server 2008 SP3 is technically a lower version than 2008 R2 SP1
    but it was released after it.
    The service packs release date don't matter, only the major+minor build versions are important; restore should work in your constellation.
    During FTP transfer the file could be damaged, that's possible. The backup file could be also "blocked" by OS because it was download from a different server; then you have to unblock it like every other download file.
    Olaf Helper
    [ Blog] [ Xing] [ MVP]

  • Sql server 2008/2012 Trigger Query

    
    Hi All,
    I am trying to create a SLQ server trigger so that when TAS1 code is 003 then change the HRSCODE to OTHR. Would anyone be able to provide me with a sample code as to do this please ?

    Are you looking for something like the below code
    IF OBJECT_ID('EMPLOYEE') IS NOT NULL
    DROP TABLE EMPLOYEE
    GO
    /* Create employee table if it does not exist */
    CREATE TABLE EMPLOYEE
    EMPID INT PRIMARY KEY,
    FNAME VARCHAR(25),
    LNAME VARCHAR(25),
    GO
    /* Populate employee table with sample rows */
    INSERT INTO EMPLOYEE (EMPID, FNAME, LNAME)
    VALUES (500, 'John','Smith'),
    (501, 'Alex','Admas'),
    (502, 'Eric','James'),
    (503, 'Shaun','Marsh')
    GO
    /* See the table records from both tables. We have four rows in both tables */
    SELECT * from EMPLOYEE
    CREATE TRIGGER TRG_InsertSyncEmp
    ON dbo.EMPLOYEE
    AFTER INSERT AS
    BEGIN
    UPDATE T1
    SET FNAME='Jayaram'
    FROM EMPLOYEE T1 WHERE EMPID=(SELECT EMPID FROM INSERTED where FNAME='Prashanth')
    END
    GO
    INSERT INTO EMPLOYEE (EMPID, FNAME, LNAME) VALUES (505, 'Prashanth', 'jayaram')
    select * from EMPLOYEE
    --Prashanth

  • SQL Server 2008 R2 Database

    Please Help.
    I don't find the DIMDate (dbo) in the Adventure WorksDW _ Data 
    Thanks in advance
    Wilfredo de Jesus-Rivera
    [email protected]

    Try using  AdventureWorksBI.msi instead of Adventure WorksDW from
    http://msftdbprodsamples.codeplex.com/releases/view/4004
    Regards, RSingh

  • Using SSDT-BI in Visual Studio 2012 to create and maintain SSRS, SSAS, SSIS in SQL Server 2008 R2

    Hi,   My management is wanting all the developers (database and .net) to upgrade from Visual Studio 2008 to Visual Studio 2012.  We are currently using SQL Server 2008 R2 for our data warehouse and using Business Intelligence (SSIS,
    SSAS, and SSRS) to maintain it.  Our database team is also wanting to create database projects and include that in our Team Foundation Server 2010 code repository along with our BI code.  From what I've been able to research googling the
    internet is there are two products available SSDT and SSDT-BI which can be installed into VS2012, but it appears that only SSDT for database projects is the only thing that will work until we someday upgrade to SQL Server 2012.  Most of the information
    I've found on the internet regarding this subject is over a year old and a lot can change in a year.  So my questions are can we install VS2012 and both SSDT and SSDT-BI to create and maintain the SSIS, SSRS, and SSAS currently in our SQL Server 2008
    R2 database?  If we can install these three items, VS2012 and the two SSDTs, and are able to create new BI and maintain our current BI in our SS2008R2 database then what issues might we have with our TFS2010 code repository?  We prefer
    to use only VS2012 or VS2008 but not both at the same time.  If we can't do everything we are currently doing in VS2008 with our SS2008R2 database by switching to VS2012 and the two SSDTs then we will stay with VS2008 until we someday upgrade
    to SS2012.  Please advise and thank you.  James M.

    I'm going to move this to the SSAS blog, where most SSDT-BI questions are answered (this forum mainly answers SSDT questions). Someone there may be able to give you better information but here's what I know:
    - I think you'll only need to install SSDT-BI since you're using SSIS, SSAS and SSRS. SSDT is the database tooling which it sounds like you wouldn't use, and it's actually built into VS2012 in any case.
    - SSIS projects don't work with earlier versions of SQL Server, but SSAS and SSRS do. Details are on
    this blog post. I don't have enough knowledge to suggest workarounds or best practices for handling the SSIS issue. Perhaps you could keep 2 projects, or 2 branches of the same project (one for 2012, one for 2008) if that's possible? I think your BIDS projects
    will be upgraded to SSDT-BI compatible projects so it's work checking them into source control, upgrading, then comparing to understand what's changed. You might be able to keep the same overall source and just change a few settings in the different branches?
    Hopefully someone on the SSAS forum can help give you more information and suggestions.
    Kevin

  • SQL Server 2008 R2: which version of Visual Studio do I need to keep database projects and SSIS projects in the same solution

    I need to build a solution containing a database project and an integration services project for SQL Server 2008R2.  Apparently, the subset of Visual Studio tools that comes with SQL Server 2008R2 does not include database projects and does not have
    Team Foundation Server support.  Because of those limitations, I am trying to determine which version of Visual Studio will allow me to:
    1. Build a single solution that includes both a database project and an Integration Services project
    2. For the database project, be able to import a database schema from an existing SQL Server 2008 R2 database, do schema compares and update the project from the database and vice versa
    3. For the Integration Services project, be able to deploy the packages to SQL Server Integration Services on SQL Server 2008 R2 (that is, to the msdb database).
    4. Use Team Foundation Server for source control of the whole solution, including both project types.

    Hi G Britton,
    To build a solution containing a database project and an integration services project for SQL Server 2008 R2 and use Team Foundation Server for source control.
     You can choose to install Visual Studio 2008.
    And as you want to utilize Schema compare and/or Data compare functionalities in Visual Studio, you will need to install the
    Visual Studio Team System 2008 Database Edition or Visual Studio Team System 2008 Team Suite.
    In addition, for Visual Studio issues, I would like to recommend you post the question in the
    Visual
    Studio forums to get better support.
    Reference:
    Team Foundation Version Control
    Compare and Synchronize Database Schemas
    Interoperability and Coexistence (Integration Services)
    Thanks,
    Lydia Zhang
    Lydia Zhang
    TechNet Community Support

  • Installing SQL Server 2008 R2 via command line - setup100.exe returned exit code 0x84BC06B2

    I am receiving an exit code 0x84BC06B2 when installing SQLExpress via the command line on a PC that also has SQL Server 2012 installed.  Below is the log file generated:
    11/18/2014 01:02:41.631 Help display: false
    11/18/2014 01:02:41.642 Checking to see if we need to install .Net version 2.0
    11/18/2014 01:02:41.653 Determining the cluster status of the local machine.
    11/18/2014 01:02:41.665 The local machine is not configured as a cluster node.
    11/18/2014 01:02:41.675 Attempting to find media for .Net version 2.0
    11/18/2014 01:02:41.686 .Net version 2.0 is installed
    11/18/2014 01:02:41.697 RedistMSI::GetExpectedBuildRevision - Setup expects MSI 4.5.6001.22159 at the minimum
    11/18/2014 01:02:41.709 Attempting to get Windows Installer version
    11/18/2014 01:02:41.721 Windows Installer version detected: 5.0.7601.18493
    11/18/2014 01:02:41.733 RedistMSI::IsVistaRTM - Not Vista RTM build
    11/18/2014 01:02:41.745 Required version of Windows Installer is already installed
    11/18/2014 01:02:41.772 Strong name verification disabling is not required
    11/18/2014 01:02:41.781 /? or /HELP or /ACTION=HELP specified: false
    11/18/2014 01:02:41.793 Help display: false
    11/18/2014 01:02:41.805 Attempting to launch landing page workflow
    11/18/2014 01:02:41.816 Attempting to set setup mutex
    11/18/2014 01:02:41.827 Setup mutex has been set
    11/18/2014 01:02:41.838 Attempting to launch global rules workflow
    11/18/2014 01:02:41.849 Media source: c:\sqlexpress\
    11/18/2014 01:02:41.860 Install media path: c:\sqlexpress\x86\setup\
    11/18/2014 01:02:41.870 Media layout: Core
    11/18/2014 01:02:41.881 Attempting to get execution timestamp
    11/18/2014 01:02:41.892 Timestamp: 20141118_010240
    11/18/2014 01:02:41.903 Attempting to run workflow RUNRULES /RULES=GlobalRules
    11/18/2014 01:02:41.915 Attempting to launch process c:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\SQLServer2008R2\x86\setup100.exe
    11/18/2014 01:02:50.467 Process returned exit code: 0x00000000
    11/18/2014 01:02:50.484 Workflow RUNRULES /RULES=GlobalRules returned exit code: 0x00000000
    11/18/2014 01:02:50.496 Attempting to launch component update workflow
    11/18/2014 01:02:50.509 Media source: c:\sqlexpress\
    11/18/2014 01:02:50.522 Install media path: c:\sqlexpress\x86\setup\
    11/18/2014 01:02:50.534 Media layout: Core
    11/18/2014 01:02:50.546 Attempting to get execution timestamp
    11/18/2014 01:02:50.558 Timestamp: 20141118_010240
    11/18/2014 01:02:50.570 Attempting to run workflow COMPONENTUPDATE
    11/18/2014 01:02:50.581 Attempting to launch process c:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\SQLServer2008R2\x86\setup100.exe
    11/18/2014 01:03:02.572 Process returned exit code: 0x00000000
    11/18/2014 01:03:02.590 Workflow COMPONENTUPDATE returned exit code: 0x00000000
    11/18/2014 01:03:02.602 Attempting to launch user requested workflow locally
    11/18/2014 01:03:02.614 Attempting to find local setup.exe
    11/18/2014 01:03:02.626 Local bootstrap folder path: c:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\
    11/18/2014 01:03:02.639 Local setup100.exe full path: c:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\SQLServer2008R2\x86\setup100.exe
    11/18/2014 01:03:02.650 Media source: c:\sqlexpress\
    11/18/2014 01:03:02.661 Install media path: c:\sqlexpress\x86\setup\
    11/18/2014 01:03:02.672 Media layout: Core
    11/18/2014 01:03:02.684 Attempting to get execution timestamp
    11/18/2014 01:03:02.695 Timestamp: 20141118_010240
    11/18/2014 01:03:02.706 Attempting to run user requested action from local setup100.exe
    11/18/2014 01:03:02.717 Attempting to launch process c:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\SQLServer2008R2\x86\setup100.exe
    11/18/2014 01:07:28.302 Process returned exit code: 0x84BC06B2
    11/18/2014 01:07:28.314 Local setup100.exe returned exit code: 0x84BC06B2
    11/18/2014 01:07:28.326 Attempting to release setup mutex
    11/18/2014 01:07:28.338 Setup mutex has been released
    11/18/2014 01:07:28.351 Setup closed with exit code: 0x84C40013
    11/18/2014 01:07:28.362 ======================================================================
    Does anyone have any ideas of why this is failing?

    Here is the summary.txt:
    Overall summary:
      Final result:                  SQL Server installation failed. To continue, investigate the reason for the failure, correct the problem, uninstall SQL Server, and then rerun SQL Server Setup.
      Exit code (Decimal):           -2068052302
      Exit facility code:            1212
      Exit error code:               1714
      Exit message:                  SQL Server installation failed. To continue, investigate the reason for the failure, correct the problem, uninstall SQL Server, and then rerun SQL Server Setup.
      Start time:                    2014-11-18 01:03:03
      End time:                      2014-11-18 01:07:23
      Requested action:              Install
      Log with failure:              C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20141118_010240\Detail.txt
      Exception help link:           http%3a%2f%2fgo.microsoft.com%2ffwlink%3fLinkId%3d20476%26ProdName%3dMicrosoft%2bSQL%2bServer%26EvtSrc%3dsetup.rll%26EvtID%3d50000%26ProdVer%3d10.50.1600.1%26EvtType%3d0xE53883A0%400xBE03358B%401306%4023
    Machine Properties:
      Machine name:                  PC81372
      Machine processor count:       4
      OS version:                    Windows 7
      OS service pack:               Service Pack 1
      OS region:                     United States
      OS language:                   English (United States)
      OS architecture:               x86
      Process architecture:          32 Bit
      OS clustered:                  No
    Product features discovered:
      Product              Instance             Instance ID                    Feature                
                     Language             Edition              Version         Clustered 
      Sql Server 2008      SQLEXPRESS           MSSQL10.SQLEXPRESS             Database Engine Services                 1033      
              Express Edition      10.2.4000.0     No        
      Sql Server 2008      SQLEXPRESS           MSSQL10.SQLEXPRESS             SQL Server Replication                   1033      
              Express Edition      10.2.4000.0     No        
    Package properties:
      Description:                   SQL Server Database Services 2008 R2
      ProductName:                   SQL Server 2008 R2
      Type:                          RTM
      Version:                       10
      SPLevel:                       0
      Installation location:         c:\sqlexpress\x86\setup\
      Installation edition:          EXPRESS
    User Input Settings:
      ACTION:                        Install
      ADDCURRENTUSERASSQLADMIN:      True
      AGTSVCACCOUNT:                 NT AUTHORITY\NETWORK SERVICE
      AGTSVCPASSWORD:                *****
      AGTSVCSTARTUPTYPE:             Disabled
      ASBACKUPDIR:                   Backup
      ASCOLLATION:                   Latin1_General_CI_AS
      ASCONFIGDIR:                   Config
      ASDATADIR:                     Data
      ASDOMAINGROUP:                 <empty>
      ASLOGDIR:                      Log
      ASPROVIDERMSOLAP:              1
      ASSVCACCOUNT:                  <empty>
      ASSVCPASSWORD:                 *****
      ASSVCSTARTUPTYPE:              Automatic
      ASSYSADMINACCOUNTS:            <empty>
      ASTEMPDIR:                     Temp
      BROWSERSVCSTARTUPTYPE:         Automatic
      CONFIGURATIONFILE:             C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20141118_010240\ConfigurationFile.ini
      CUSOURCE:                      
      ENABLERANU:                    True
      ENU:                           True
      ERRORREPORTING:                False
      FARMACCOUNT:                   <empty>
      FARMADMINPORT:                 0
      FARMPASSWORD:                  *****
      FEATURES:                      SQLENGINE,REPLICATION
      FILESTREAMLEVEL:               0
      FILESTREAMSHARENAME:           <empty>
      FTSVCACCOUNT:                  <empty>
      FTSVCPASSWORD:                 *****
      HELP:                          False
      IACCEPTSQLSERVERLICENSETERMS:  True
      INDICATEPROGRESS:              False
      INSTALLSHAREDDIR:              C:\Program Files\Microsoft SQL Server\
      INSTALLSHAREDWOWDIR:           C:\Program Files\Microsoft SQL Server\
      INSTALLSQLDATADIR:             <empty>
      INSTANCEDIR:                   C:\Program Files\Microsoft SQL Server\
      INSTANCEID:                    WORKSTUDIO
      INSTANCENAME:                  WORKSTUDIO
      ISSVCACCOUNT:                  NT AUTHORITY\NetworkService
      ISSVCPASSWORD:                 *****
      ISSVCSTARTUPTYPE:              Automatic
      NPENABLED:                     0
      PASSPHRASE:                    *****
      PCUSOURCE:                     
      PID:                           *****
      QUIET:                         True
      QUIETSIMPLE:                   False
      ROLE:                          AllFeatures_WithDefaults
      RSINSTALLMODE:                 FilesOnlyMode
      RSSVCACCOUNT:                  NT AUTHORITY\NETWORK SERVICE
      RSSVCPASSWORD:                 *****
      RSSVCSTARTUPTYPE:              Automatic
      SAPWD:                         *****
      SECURITYMODE:                  SQL
      SQLBACKUPDIR:                  <empty>
      SQLCOLLATION:                  SQL_Latin1_General_CP1_CI_AS
      SQLSVCACCOUNT:                 NT AUTHORITY\NETWORK SERVICE
      SQLSVCPASSWORD:                *****
      SQLSVCSTARTUPTYPE:             Automatic
      SQLSYSADMINACCOUNTS:           BUILTIN\USERS
      SQLTEMPDBDIR:                  <empty>
      SQLTEMPDBLOGDIR:               <empty>
      SQLUSERDBDIR:                  <empty>
      SQLUSERDBLOGDIR:               <empty>
      SQMREPORTING:                  False
      TCPENABLED:                    1
      UIMODE:                        AutoAdvance
      X86:                           False
      Configuration file:            C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20141118_010240\ConfigurationFile.ini
    Detailed results:
      Feature:                       Database Engine Services
      Status:                        Failed: see logs for details
      MSI status:                    Failed: see details below
      MSI error code:                1714
      MSI log file location:         C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20141118_010240\sql_engine_core_shared_loc_Cpu32_1033_1.log
      MSI error description:         The older version of SQL Server 2008 R2 Database Engine Shared cannot be removed.  Contact your technical support group.  
      Configuration status:          Failed: see details below
      Configuration error code:      0xBE03358B@1306@23
      Configuration error description: Could not find the Database Engine startup handle.
      Configuration log:             C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20141118_010240\Detail.txt
      Feature:                       SQL Server Replication
      Status:                        Failed: see logs for details
      MSI status:                    Passed
      Configuration status:          Failed: see details below
      Configuration error code:      0xBE03358B@1306@23
      Configuration error description: Could not find the Database Engine startup handle.
      Configuration log:             C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20141118_010240\Detail.txt
    Rules with failures:
    Global rules:
    Scenario specific rules:
    Rules report file:               C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20141118_010240\SystemConfigurationCheck_Report.htm

  • Can I use Same ADF application with SQL server 2008 as well as Oracle 11g?

    Hi ,
    I have created a application in ADF(Using J-Developer). I used SQL server 2008 as Database Provider. I have same Database in Oracle 11g. I want to connect my appliction to Oracle 11g database. I changed connection and connected to Oracle. But, when I tried to save or delete any data from front end, it gave error. Any solution on this?
    Thanks

    Hi,
    I have created Entity object and View object for every page in my application. That objects created from sql server database. Application is working fine with sql server. But when connected with Oracle 11g. It is giving following errors:
    On clicking search control it gives: ORA 00923 From keyword not found where expected.
    On searching with perticular field it gives: ORA-01722: Invalid Number.
    On Clicking save buttonit gives: ORA-00933: SQL command not properly ended.
    These are error messages from IntegratedWebLogicServer-Log:
    java.sql.SQLSyntaxErrorException: ORA-00923: FROM keyword not found where expected
    <QueryCollection> <buildResultSet> [3929] java.sql.SQLSyntaxErrorException: ORA-00923: FROM keyword not found where expected
    Caused by: java.sql.SQLSyntaxErrorException: ORA-00923: FROM keyword not found where expected
    <DCBindingContainer> <cacheException> [3947] * * * BindingContainer caching EXCEPTION:oracle.jbo.SQLStmtException
    <DCBindingContainer> <cacheException> [3948] java.sql.SQLSyntaxErrorException: ORA-00923: FROM keyword not found where expected
    <DCBindingContainer> <cacheException> [3949] * * * BindingContainer caching EXCEPTION:oracle.jbo.SQLStmtException
    <DCBindingContainer> <cacheException> [3950] java.sql.SQLSyntaxErrorException: ORA-00923: FROM keyword not found where expected
    <DCBindingContainer> <cacheException> [3951] * * * BindingContainer caching EXCEPTION:oracle.jbo.SQLStmtException
    <DCBindingContainer> <cacheException> [3952] java.sql.SQLSyntaxErrorException: ORA-00923: FROM keyword not found where expected
    <DCBindingContainer> <cacheException> [3953] * * * BindingContainer caching EXCEPTION:oracle.jbo.SQLStmtException
    <DCBindingContainer> <cacheException> [3954] java.sql.SQLSyntaxErrorException: ORA-00923: FROM keyword not found where expected
    java.lang.NullPointerException

  • How to extract data from multiple flat files to load into corresponding tables in SQL Server 2008 R2 ?

    Hi,
              I have to implement the following scenario in SSIS but don't know how to do since I never worked with SSIS before. Please help me.
              I have 20 different text files in a single folder and 20 different tables corresponding to each text file in SQL Server 2008 R2 Database. I need to extract the data from each text file and
    load the data into corresponding table in Sql Server Database. Please guide me in how many ways I can do this and which is the best way to implement this job.  Actually I have to automate this job. Few files are in same format(with same column names
    and datatypes) where others are not.
    1. Do I need to create 20 different projects ?
                   or
        Can I implement this in only one project by having 20 packages?
                 or
        Can I do this in one project with only one package?
    Thanks in advance.

    As I said I don't know how to use object data type, I just given a shot as below. I know the following code has errors can you please correct it for me.
    Public
    Sub Main()
    ' Add your code here 
    Dim f1
    As FileStream
    Dim s1
    As StreamReader
    Dim date1
    As
    Object
    Dim rline
    As
    String
    Dim Filelist(1)
    As
    String
    Dim FileName
    As
    String
    Dim i
    As
    Integer
    i = 1
    date1 =
    Filelist(0) =
    "XYZ"
    Filelist(1) =
    "123"
    For
    Each FileName
    In Filelist
    f1 = File.OpenRead(FileName)
    s1 = File.OpenText(FileName)
    rline = s1.ReadLine
    While
    Not rline
    Is
    Nothing
    If Left(rline, 4) =
    "DATE"
    Then
    date1 (i)= Mid(rline, 7, 8)
     i = i + 1
    Exit
    While
    End
    If
    rline = s1.ReadLine
    End
    While
    Next
    Dts.Variables(
    "date").Value = date1(1)
    Dts.Variables(
    "date1").Value = date1(2)
    Dts.TaskResult = ScriptResults.Success
    End
    Sub

  • Trying to zip / compress a file in Windows Server 2008 & SQL Server 2008 R2 server

    Hi,
    We are trying to zip / compress a xml file that has been created by retrieving data from SQL Server 2008 R2 database running on Windows Server 2008.
    To compress this file, we cannot use any external softwares like 7-zip or WinZip.
    So, we would like to know if there is any windows default compression tool that works on command line to compress the file?
    As this is a live server we cannot apply any other softwares.
    Please suggest any ways to do it in Windows Server 2008 machine.
    Thanks & Regards
    Kalyan

    Hello Kaylan,
    and for uncompress what can I use
    This is a way to do it in SSIS
    http://sqlblog.com/blogs/jorg_klein/archive/2009/08/27/ssis-unpack-a-zip-file-with-the-script-task.aspx
    Please Mark This As Answer if it helps to solve the issue Visakh ---------------------------- http://visakhm.blogspot.com/ https://www.facebook.com/VmBlogs

Maybe you are looking for

  • How to force simple tags and null attributes to appear when using SQL/XML?

    Hello everybody: I'm developing a non-schema based XMLType view. When the XML document is generated, i noticed two things I need to manage in order to achieve the desired result: 1. Oracle generates a <tag></tag> pair for each XMLELEMENT defined; in

  • Since updating to itunes 11, Home Sharing is not working

    Since updating to itunes 11, Home Sharing is not working. I am running Windows 7, 64-bit. All mobile devices are up to date with ios, including 2 apple tvs (2 & 3), iphone 4s and 3gs, ipad1 & ipad2. I've rebooted twice, turned home sharing off, then

  • External hard drive seen in Disk Utility, but will not mount.

    My external hard drive has power and is spinning, but will not mount.  It was fine yesterday.  It shows up in Disk Utility and is verified and repaired.  Tried the drive on 2 other macs with same result.  Tried a new enclosure and that did not work. 

  • I can't find filter gallery in PS CC2014?

    I used to use Elements but since subscribing to PSCC 2014 filter galleries has disappeared from the filter menu. I use a Mac. Any help greatly appreciated. Regards Libby

  • Intercompany customer/vendor netting

    Can someone pls share what is the IHC config steps required for intercompany Customer/vendor netting. is there a way to make payment from F110  run from Intercompany vendor, clears receivale balance by Financial statement posting to the intercompany