SQL Server 2008 Management Studio Express

So I have an employee that works on Domain A, however she needs to log into SSMS 2008 Express under Domain B. When she launches SSMS Express it will not let her change the windows login credentials at all. My boss told me that the solution below was suggested
to him by MS to resolve the issue.
runas
/netonly
/user:domain\username
"C:\Progr...\IDE\Ssms.exe"
So I did this and still same issue, the ability to change the credentials are still grayed out.
Any suggestions?
Thanks,
Matt M.

Hi,
It is by design that User name and Password area is grayed out when using Windows Authentication. SQL Server Management Studio fills in the user with the currently logged on Windows account for Windows authentication. The end-user is not allowed to change
or input a different user.
As suggested, you can launch SSMS with runas command with the "/netonly" switch to log in using remote credentials on a domain that you’re not currently a member of.
Check out the following link for more information:
SSMS - Allow login with other domain and user
http://connect.microsoft.com/SQLServer/feedback/details/774357/ssms-allow-login-with-other-domain-and-user
TIP: How to Run Programs as a Domain User from a Non-domain Computer
http://codebetter.com/jameskovacs/2009/10/12/tip-how-to-run-programs-as-a-domain-user-from-a-non-domain-computer/
Thanks.
Tracy Cai
TechNet Community Support

Similar Messages

Error installing sql server 2008 management studio express

Hello,
I need to install sql server 2008 management studio express on a sql server 2k8 R2 instance.
First of all, I've downloaded this one from this link: http://www.microsoft.com/en-us/download/details.aspx?id=7593 (for 32 bits).
Once I've the downloaded file I run this file and choose the first option (New sql server stand-alone...) in the installation part. Finally, in the installation type I choose the option 'Add features to an existing instance of SQL Server 2008' with the instance
selected. I push Next and then I get the following error: 'The instance ID is required but it is missing'.
Can anybody help me?
Thanks a lot.
Regards.

Hello,
What’s the edition of the SQL Server 2008 R2? If you had installed SQL Server 2008 R2 Developer edition, you should install “SQL Server 2008 Express with Tools” edition or “SQL Server 2008 Express with Advanced Services” edition.
Please refer to the following article for more information:
http://www.benlittler.com/2009/06/how-to-install-sql-management-studio-express-2008/
Regards,
Fanny Liu
Fanny Liu
TechNet Community Support

Microsoft SQL Server 2012 Management Studio Express

Hello,
I have a question, Can I use Microsoft SQL Server 2012 Management Studio Express tool to administrate my SQL Server 2008 Enterprise database without a restriction or limitations?.
Basically, I have a SQL server 2008 R2 database as production enviroment(Enterprise version) and I would like to know if I can use Microsoft SQL server 2012 Management Studio Express tool to manage my database without limitations.
Thanks

SSMS2012 is backwards compatible so you can use ..
http://social.msdn.microsoft.com/Forums/en-US/sqltools/thread/0151c2e8-2281-4a78-86b0-20cc1bfd57ac
Raju Rasagounder MSSQL DBA

Silent SQL Server 2008 Management Studio install on Win7

Hi,
Is there a way to suppress Compatibility warning box while silently installing SQL Server 2008 Management Studio install on Win7?
Thanks,
H

Hi Kugler,
Even I was facing the same issue. It is because you may pending reboots on the target machine.
I also used the cmdline as below:
<PATH of EXE> /Q /IACCEPTSQLSERVERLICENSETERMS /ACTION=install /FEATURES=SSMS,ADV_SSMS /HIDECONSOLE
Before installation it is better to restart the target machine and start with the installation.

While installing the sql server 2008 management studio I am getting the below error.So what do I do?

Hi,
While installing the sql server 2008 management studio I am getting the below error.
unhandled exception has occured in your application.if you click continue,the application will ignore this error and attempt to continue.if you click quit,the aplication will close immediatly.
An error occured creating the configuration section handler for userSettings/Microsoft.SqlServer.Configuration.LandingPage.Properties.Settings:Could not load file or
assembly 'system.version=4.0.0.0. culture=neutral, publickey token=b77a5c561934e089' or one of its dependencies.the system cannot find the file supplied.
(C:\users\harsha\appdata\local\microsoft_corporation\landingpage.exe_strongname_ryspccglaxmt4nhllj5z3thycltsvyyx\10.0.0.0\user.config
and finally it is giving the options like continue and quit the installation.
So what do I do?
regards,
harsha.

Hello,
Please try deleting the following sub folder to see if this will work:
C:\users\(my profile)\AppData\Local\Microsoft_Corporation
If you can't see AppData folder, you could use following steps to show hidden files:
1. Open an explorer window, hit "ALT-T" choose Folder Options then go to the view tab.
2. Turn on Show hidden files, folders or drives and
disable Hide protected Operating System files (recommended).
SQL Server 2008 setup fails with a Microsoft .NET Framework exception:
http://blogs.msdn.com/b/vsnetsetup/archive/2009/10/29/sql-server-2008-setup-fails-with-a-microsoft-net-framework-exception.aspx.
Hope this helps.
Regards,
Alberto Morillo
SQLCoffee.com

Microsoft SQL Server 2012 Management Studio Express silent installation very slow

Iam doing silent installations often on several Systems.
I install the Microsoft SQL Server 2012 Management Studio Express with this command:
"SQLManagementStudio_x64_DEU.exe /ACTION=INSTALL /QUIET /IAcceptSQLServerLicenseTerms="True" /FEATURES=CONN,BC,SSMS /indicateprogress"
The installation will take almost an hour to finish.
I never get error messages or so. The installation afterwards is fine.
Is there a way to speed up the installation process?
Thanks!

Hi Dennis,
When installing SQL Server Management Studio, it is normal for us taking an hour to finish the installation.
Personally, if you want to speed up the installation process, I recommend improve your hardware device on your computer, such as CPU, RAM, hard disk and so on.
Or you can submit an submit the requirement at https://connect.microsoft.com/SQLServer/.
If the requirement mentioned by customers for many times, the product team may consider to add or improve this requirement in the future SQL Server version. Thanks for your understanding.
Thanks,
Sofiya Li
Sofiya Li
TechNet Community Support

Sql server 2008 management studio

hi sir
we want to install following version of sql 2008 management studio for our access control.
it is free version or we need to purchase license for this please tell us because access control support team said this is free version. and when we check in Microsoft site also showing free version.need just confirm it is free or paid.
Microsoft SQL Server Management Studio 10.0.1600.22
Microsoft Data Access Components (MDAC) 2000.086.3959.00

please confirm this is free version or paid
Microsoft SQL Server Management Studio 10.0.1600.22
Microsoft Data Access Components (MDAC) 2000.086.3959.00
Regarding MDAC: It' a System component and already integrated in all current Windows OS Version, no Need to install it; see
Microsoft Data Access Components (MDAC) 2.8 SP1 => System Requirements =>
Supported Operating System
Regarding SSMS: If you have a SQL Server licenses then you can install SSMS on the client machine, it's part of the license; see
http://download.microsoft.com/download/6/F/8/6F84A9FE-1E5C-44CC-87BB-C236BFCBA4DF/SQLServer2008_LicensingGuide.pdf page 47
"Additional Software That May Be Run"=> "... without the need for additional licenses
Olaf Helper
[ Blog] [ Xing] [ MVP]

SQL Server 2005 Management Studio Local Server Connection Error

Sir, as you can see in above image,,, I have installed SQL SERVER 2005 Management Studio Express of 64 bit.
And when i have tried to connect it to local server it shows me above error...... Please guide me how should i fix it?

Check
http://sqlserver-help.com/2011/06/19/help-whats-my-sql-server-name/
Balmukund Lakhani
Please mark solved if I've answered your question, vote for it as helpful to help other users find a solution quicker
This posting is provided "AS IS" with no warranties, and confers no rights.
My Blog |
Team Blog | @Twitter
| Facebook
Author: SQL Server 2012 AlwaysOn -
Paperback, Kindle

SQL Server 2012 Management Studio:Importing XML file to new Table of new Database-XML parsing: unexpected end of input???

Hi all,
In the Notepad, I created an xml file (ZenQroducts.xml) :
<Qroducts>
<Qroduct>
<SKU>1</SKU>
<Desc>Book</Desc>
</Qroduct>
<Qroduct>
<SKU>2</SKU>
<Desc>DVD</Desc>
</Qroduct>
<Qroduct>
<SKU>3</SKU>
<Desc>Video</Desc>
</Qroduct>
In my SQL Server 2012 Management Studio, I executed the following code:
--to create a new object Qroducts in a new database OPENXMLtesting
CREATE DATABASE OPENXMLtesting
GO
CREATE TABLE Qroducts(
sku INT Primary KEY,
qroduct_desc VARCHAR(30));
INSERT INTO Qroducts (sku, qroduct_desc)
SELECT X.qroduct.query('SKU').value('.', 'INT'),
X.qroduct.query('Desc').value('.', 'VARCHAR(30)')
FROM (
SELECT CAST(x AS XML)
FROM OPENROWSET(
BULK 'H:\ZenQroducts.xml',
SINGLE_BLOB) AS T(x)
) AS T(x)
CROSS APPLY x.nodes('Qroducts/Qroduct') AS X(qroduct);
SELECT sku, qroduct_desc
FROM Qroducts;
I got the following message:
Msg 9400, Level 16, State 1, Line 6
XML parsing: line 13, character 12, unexpected end of input
I have no ideas why I got this "XML parsing:line 13, character12, unexpected end of input" message. Please kindly help, advise me on where I made mistake and how I can resolve this problem, and respond in this Forum.
Thanks in advance,
Scott Chang

Hi Manish, Thanks for your response.
Yes, it is a duplicate with Qroducts/Qroduct instead of Products/Product. I did it, because I don't know how to remove the existing "Products" database.
Again, I got the existing "Qroducts" database in this second trial!!?? I am comletely lost in doing "Importing XML file to SQL Table" now!! I think that I have not touched T-SQL and XML programming, since 2008. I
did not catch the new features of T-SQL 2008, XML, SQL/XML, XQuery, etc. for long time. Recently, I did not know what DECLARE, @x, SET,...were, and dived into the SQL/XML and XQuery programming. I knew the SQL Basics (SELECT, FROM, WHERE,..), creating
the names of databases and tables in SQL Server 2008/2012 Management Studio (Express) before. This morning, I found an old T-SQL 2008 Prgrammer's Guide that has the new features of SQL Server 2008 for T-SQL, XML, XQuery, etc. I just starting reading
it to know what DECLARE, @x, SET,... are. But, I still don't know where the existing databases "Products" and "Qroducts" (created by me) are - they are not in the Databases of SQL Server 2012 Management Studio I am using!!?? Could
you please kindly point out where the "Products" and "Qroducts" databases are?
Prashanth responded to my posted question too and he asked to to try his code: DECLARE @xml XML, SELECT @xml =' <Qroducts>.....SELECT product.value.....FROM @XML.nodes.....AS.... I just learned that his code is doing the thing we
want to do and print the results below the SQL Query. This is not what I need in doing my SQL/XML programming. I am reading/studying the new (2008) features of T-SQL, XQuery 1.0: An XML Query Language (Second Edition), and Microsoft XQuery Language Reference
(SQL Server 2012 Books Online) closely now. I hope that I can resume the T-SQL, XML Query, SQL/XML, XQuery in my SQL Server 2012 Management Studio soon.
Please tell me where the existing databases "Products" and "Qroducts" I created in my previous trials in my SQL Server 2012 Management Studio. This is what I need to know and to delete them, before I do this kind of "Importing
XML file to Table of SQL Server 2012 Management Studio" programming again.
Please kindly help, advise and respond again.
Many Thanks,
Scott Chang

Open (.sdf) file with SQL server 2005 Management Studio

In VS2005, I have created a SQL Mobile database, (.sdf).
Copied that (.sdf) file to Desktop, and when I try to open with SQL Server 2005 management studio, its showing error "make sure the application for the file type (.sdf) is installed."
How can I open this file with SQL server?
Regards
Abinash

You must install SP2 if using Management Studio Express (http://www.microsoft.com/downloads/details.aspx?familyid=6053C6F8-82C8-479C-B25B-9ACA13141C9E&displaylang=en)Erik Ejlskov Jensen, MCTS: WM App, MCITP: SQL 2008 Dev - http://erikej.blogspot.com
Please mark as answer, if this was it.

How do I create a view in SQL Server in Visual Studio Express 2013 for Desktop?

Hi
I've got a SQL Server database set up using the internal SQL Server in Visual Studio Express 2013 for Desktop. I want to create a view (using tables with one to many relationships) but I don't
know how to do it.
Where can I find a good tutorial on creating views in SQL Server in Visual Studio Express 2013 for Desktop? I think Visual Studio Express 2013 for Desktop doesn't have some view designer that
exists in the non-express version of Visual Studio (if I'm not mistaken). So I think I'd need a tutorial on how to do the actual SQL, unless there is some tool I don't know about.
Thanks

Hi ,
According to your description, if you install SQL Server SQL Server 2014 Express and SQL Server Manager Studio tools (SSMS), if you want to create a view, you can use SSMS. Then if you want to connect to and Diagram your SQL Express Database in Visual Studio
2013, you can attach the database file by using the .NET Framework Data Provider for SQL Server in Visual Studio, and create a database diagram via expanding the “Database Diagrams” node.
For more information, there is similar issue about how to connect to and Diagram your SQL Express Database in Visual Studio 2012 , you can review the following article,
http://blogs.msdn.com/b/bethmassi/archive/2011/10/27/how-to-connect-to-and-diagram-your-sql-express-database-in-visual-studio-lightswitch.aspx.
Regards,
Sofiya Li
Sofiya Li
TechNet Community Support

SQL Server 2012 Management Studio

I need to install SQL Server 2012 Management Studio. Where can I find the link to install the program?

I need to install SQL Server 2012 Management Studio. Where can I find the link to install the program?
Hello,
SQL server management studio is not available for public download but Management studio express is there.You can download SSMS 2012 express SP1 form below link.SSMS 2012 Express SP1 has all capabilities
http://www.microsoft.com/en-gb/download/details.aspx?id=35579
download below file
SQLManagementStudio_x64_ENU.exe
Please mark this reply as the answer or vote as helpful, as appropriate, to make it useful for other readers
My TechNet Wiki Articles

SQL Server 2012 Management Studio:In the Database, how to print out or export the old 3 dbo Tables that were created manually and they have a relationship for 1 Parent table and 2 Child tables?How to handle this relationship in creating a new XML Schema?

Hi all,
Long time ago, I manually created a Database (APGriMMRP) and 3 Tables (dbo.Table_1_XYcoordinates, dbo.Table_2_Soil, and dbo.Table_3_Water) in my SQL Server 2012 Management Studio (SSMS2012). The dbo.Table_1_XYcoordinates has the following columns: file_id,
Pt_ID, X, Y, Z, sample_id, Boring. The dbo.Table_2_Soil has the following columns: Boring, sample_date, sample_id, Unit, Arsenic, Chromium, Lead. The dbo.Table_3_Water has the following columns: Boring, sample_date, sample_id, Unit, Benzene, Ethylbenzene,
Pyrene. The dbo.Table_1_XYcoordinates is a Parent Table. The dbo.Table_2_Soil and the dbo.Table_3_Water are 2 Child Tables. The sample_id is key link for the relationship between the Parent Table and the Child Tables.
Problem #1) How can I print out or export these 3 dbo Tables?
Problem #2) If I right-click on the dbo Table, I see "Start PowerShell" and click on it. I get the following error messages: Warning: Failed to load the 'SQLAS' extension: An exception occurred in SMO while trying to manage a service.
--> Failed to retrieve data for this request. --> Invalid class. Warning: Could not obtain SQL Server Service information. An attemp to connect to WMI on 'NAB-WK-02657306' failed with the following error: An exception occurred in SMO while trying
to manage a service. --> Failed to retrieve data for this request. --> Invalid class. .... PS SQLSERVER:\SQL\NAB-WK-02657306\SQLEXPRESS\Databases\APGriMMRP\Table_1_XYcoordinates>   What causes this set of error messages? How can
I get this problem fixed in my PC that is an end user of the Windows 7 LAN System? Note: I don't have the regular version of Microsoft Visual Studio 2012 in my PC. I just have the Microsoft 2012 Shell (Integrated) program in my PC.
Problem #3: I plan to create an XML Schema Collection in the "APGriMMRP" database for the Parent Table and the Child Tables. How can I handle the relationship between the Parent Table and the Child Table in the XML Schema Collection?
Problem #4: I plan to extract some results/data from the Parent Table and the Child Table by using XQuery. What kind of JOIN (Left or Right JOIN) should I use in the XQuerying?
Please kindly help, answer my questions, and advise me how to resolve these 4 problems.
Thanks in advance,
Scott Chang

In the future, I would recommend you to post your questions one by one, and to the appropriate forum. Of your questions it is really only #3 that fits into this forum. (And that is the one I will not answer, because I have worked very little with XSD.)
1) Not sure what you mean with "print" or "export", but when you right-click a database, you can select Tasks from the context menu and in this submenu you find "Export data".
2) I don't know why you get that error, but any particular reason you want to run PowerShell?
4) If you have tables, you query them with SQL, not XQuery. XQuery is when you query XML documents, but left and right joins are SQL things. There are no joins in XQuery.
As for left/right join, notice that these two are equivalent:
SELECT ...
FROM   a LEFT JOIN b ON a.col = b.col
SELECT ...
FROM   b RIGHT JOIN a ON a.col = b.col
But please never use RIGHT JOIN - it gives me a headache!
There is nothing that says that you should use any of the other. In fact, if you are returning rows from parent and child, I would expect an inner join, unless you want to cater for parents without children.
Here is an example where you can study the different join types and how they behave:
CREATE TABLE apple (a int    NOT NULL PRIMARY KEY,
b varchar(23) NOT NULL)
INSERT apple(a, b)
   VALUES(1, 'Granny Smith'),
   (2, 'Gloster'),
   (4, 'Ingrid-Marie'),
   (5, 'Milenga')
CREATE TABLE orange(c int NOT NULL PRIMARY KEY,
d varchar(23) NOT NULL)
INSERT orange(c, d)
   VALUES(1, 'Agent'),
   (3, 'Netherlands'),
   (4, 'Revolution')
SELECT a, b, c, d
FROM   apple
CROSS JOIN orange
SELECT a, b, c, d
FROM   apple
INNER JOIN orange ON apple.a = orange.c
SELECT a, b, c, d
FROM   apple
LEFT   OUTER JOIN orange ON apple.a = orange.c
SELECT a, b, c, d
FROM   apple
RIGHT OUTER JOIN orange ON apple.a = orange.c
SELECT a, b, c, d
FROM   apple
FULL OUTER JOIN orange ON apple.a = orange.c
go
DROP TABLE apple, orange
Erland Sommarskog, SQL Server MVP, [email protected]

SQL Server 2012 Management Studio: Import XML File to SQL Table - XML parsing: illegal qualified name character

Hi all,
In my SQL Server 2012 Management Studio, I executed the following code:
CREATE TABLE Products(
sku INT Primary KEY,
product_desc VARCHAR(30));
INSERT INTO Products (sku, product_desc)
SELECT X.product.query('SKU').value('.', 'INT'),
X.product.query('Desc').value('.', 'VARCHAR(30)')
FROM (
SELECT CAST(x AS XML)
FROM OPENROWSET(
BULK 'H:\ZenProducts.xml',
SINGLE_BLOB) AS T(x)
) AS T(x)
CROSS APPLY x.nodes('Products/Product') AS X(product);
SELECT sku, product_desc
FROM Products;
I got the following message:
Msg 9455, Level 16, State 1, Line 5
XML parsing: line 3, character 12, illegal qualified name character
I have no ideas why the "product" in the statement "SELECT X.product.query('SKU').value('.','INT')" is not legal qualified name charcter!!!??? Please kindly help, advise and respond.
Thanks in advance,
Scott Chang

Hi Manish, Thanks for your response.
Here is a copy of my ZenProducts.xml:
<Products>
<Product>
<SKU>1<</SKU>
<Desc>Book</Desc>
</Product>
<Product>
<SKU>2<</SKU>
<Desc>DVD</Desc>
</Product>
<Product>
<SKU>3<</SKU>
<Desc>Video</Desc>
</Product>
I found the wrong "<<" in my xml file and changed it to the right "<" for the statement<SKU>1</sku>. I executed the corrected code and I got the following new message:
Msg 2714, Level 16, State 6, Line 1
There is already an object named 'Products' in the database.
I don't know how to remove the old, existing the 'Products' object in the database and execute the corrected code again. Please kindly help, advise and tell me how to resolve this new problem.
Many Thanks,
Scott Chang
P. S. I played with another project to get the 'Products' object in my database before. Frankly, I don't know where the old 'Products' object and the database are. Please enlighten me in resolving this matter more clearly.
You welcome Scott, As Olaf mentioned in this post, there was already a table exists , so need to drop your Products table.
Apart from this, I guess either you did not pasted the full XML file or what, I needed to have the ( </Products>)closing tag in your XML file as follows.
<Products>
<Product>
<SKU>1</SKU>
<Desc>Book</Desc>
</Product>
<Product>
<SKU>2</SKU>
<Desc>DVD</Desc>
</Product>
<Product>
<SKU>3</SKU>
<Desc>Video</Desc>
</Product>
</Products>
You can use following script to drop if your
Products table is already existing.
if exists(select 1 from sys.tables where name ='Products')
drop table Products
CREATE TABLE Products(
sku INT Primary KEY,
product_desc VARCHAR(30));
INSERT INTO Products (sku, product_desc)
SELECT X.product.query('SKU').value('.', 'INT'),
X.product.query('Desc').value('.', 'VARCHAR(30)')
FROM (
SELECT CAST(x AS XML)
FROM OPENROWSET(
BULK 'H:\ZenProducts.xml',
SINGLE_BLOB) AS T(x)
) AS T(x)
CROSS APPLY x.nodes('Products/Product') AS X(product);
SELECT sku, product_desc
FROM Products;
Let us know if you face any other problem.
Thanks
Manish
Please click Mark as Answer if my post solved your problem and click
Vote as Helpful if this post was useful.

SQL Server 2012 Management Studio: XML XQuery-query the XML Blob using CTE: How to specify the coorelation name in bulk rowset?

Hi all,
I just started doing the XML Xquery programming in my SQL Server 2012 Management Studio. I executed the following code:
--query the XML Blob using a CTE (pulling from the XML file each time) Products
WITH XmlFile (Contents) AS (
SELECT CONVERT (XML, BulkColumn)
FROM OPENROWSET (BULK 'H:\Products.xml', SINGLE_BLOB) ) AS XmlData
SELECT *
FROM XmlFile
GO
I got the the following Msg:
Msg 491, Level 16, State 1, Line 4
A correlation name must be specified for the bulk rowset in the from clause.
How can I specify the correction name for the bulk rowset in my project?
Please kindly help, advise and respond.
Thanks in advance,
Scott Chang

Hello Scott,
You have to assign a table alias for the OPENROWSET =>
--query the XML Blob using a CTE (pulling from the XML file each time) Products
WITH XmlFile (Contents) AS (
SELECT CONVERT (XML, BulkColumn)
FROM OPENROWSET (BULK 'H:\Products.xml', SINGLE_BLOB) AS MyXML ) AS XmlData
SELECT *
FROM XmlFile
GO
Olaf Helper
[ Blog] [ Xing] [ MVP]

SQL Server 2008 Management Studio Express

Similar Messages

Maybe you are looking for