SQL Server 2012 deployment with System Center Configuration Manager (SCCM) 2012
hi,
we have tried to deploy the SQL Server 2012 to our development machines with SCCM 2012 without success.
Commandline parameters or Configuration.ini in either case the installation failed without any useful errorlog.
Exists any howto which covers this scenario?
regards
genne
Hello,
Please see the following article about some requirements for SQL Server instances intended for SCCM 2012:
http://www.sqlcoffee.com/Tips0019.htm
Could please check to see if a Summary.txt log file exists after those installation attempts? The following article may help you locate the file on disk:
http://technet.microsoft.com/en-us/library/ms143702(v=sql.110)
Please share this log file with us, if possible.
Hope this helps.
Regards,
Alberto Morillo
SQLCoffee.com
Similar Messages
-
Deploying Office 365 Pro Plus using System Center Configuration Manager 2012 SP1
Hello,
I am trying to deploy Office 365 Pro Plus to my client machines (more than 100) via. System Center Configuration Manager 2012 SP1. It will use one administrator account for installation. But as per the licensing, we can install Office for up to 5 PCs/Macs
and 5 more Windows tablets/iPads with one Office 365 Pro Plus licenses. If this is the case, then I cannot install Office 365 Pro Plus with one admin account to my 100+ machines, as it will violate the licenses of O365 Pro Plus.
So, what is the alternative approach?
Thanks
RajIf this is the case, then I cannot install Office 365 Pro Plus with one admin account to my 100+ machines, as it will violate the licenses of O365 Pro Plus.
Hi,
this is incorrect.
There is no licensing restriction/control for the *installation* account at all, the licensing is related to who is *using* Office365ProPlus *after* installation is performed. This control, is implemented by the Microsoft Account, or OrgID, used to sign-in/activate
to Office365 when *using* Office365ProPlus.
Don
(Please take a moment to "Vote as Helpful" and/or "Mark as Answer", where applicable.
This helps the community, keeps the forums tidy, and recognises useful contributions. Thanks!) -
VHD for System Center Configuration Manager 2012 R2
I just downloaded of TechNet the VHD of System Center Configuration Manager 2012 R2. However when you bring it online it is in the domain Conteso. I have searched all over TechNet and the web, but there is no record of the admin password nor is there
any documented instructions with the download.
http://www.microsoft.com/en-us/download/details.aspx?id=40840
Best regards,
Dave Clauson
Partner Online Technical Community
We hope you get value from our new forums platform! Tell us what you think:
http://social.microsoft.com/Forums/en-US/partnerfdbk/threads
This posting is provided "AS IS" with no warranties, and confers no rightsHi,
I think you should find the password for Windows Server 2012 R2. Please try
R2Preview!
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place. -
Microsoft System Center Configuration Manager 2012 R2 Reports
Hi ;
I can't run any reports on microsoft system center configuration manager 2012 R2. I see " No items found " when i click reports on microsoft System Center Configuration manager 2012 Console.But i access all reports by internet Explorer. End of
all , i don't have any problem with queries.I am waiting for your helps.
Sincerely yours ,Hi,
It sounds like this should be the solution for you, changing the account for the SRS service.
http://blog.coretech.dk/rja/no-srs-reports-showing-up-in-sccm-console/
Regards,
Jörgen
-- My System Center blog ccmexec.com -- Twitter
@ccmexec -
System center configuration manager book
Any good books on system center configuration manager.
How about this book from amazon.
http://www.amazon.com/System-Center-Configuration-Manager-Unleashed/dp/0672337150/ref=sr_1_3?s=books&ie=UTF8&qid=1410477862&sr=1-3&keywords=system+center+configuration+manager+2012+r2
any help or suggestions are appreciated.
ThanksHi,
Please refer to the link below:
http://social.technet.microsoft.com/Search/en-US/Technet?query=SCCM%20BOOK&beta=0&ac=4
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place. -
Hi,
I required some one to help designing an SCCM 2012 Solution. I dont have any knowledge on Design Part, This is my first deployment
My goal: Interconnect 3 remote offices and The infrastructure is as follows:
Primary Site Server ( HQ ) : 1000 users
Secondary Site ( Location1) : 2000 Users
Secondary Site ( Location2) : 2000 Users
Link Between Primary and Secondary Sites : 8 MBPS MPLS link
Database will be installed on a remote SQL 2012 Server.
Please let me know is there any tool to generate Design document.
If possible please design and put the Image on the blog.Why using a remote SQL server? I'd install it locally. There is no tool available.
Just make sure that you are using a standalone primary site (therefore no CAS) and place a secondary at location 1 and 2.
Torsten Meringer | http://www.mssccmfaq.de -
System Center Configuration Manager 2012 R2
In site configuration > Sites > configure Site Components > Software update point > Products
How come I do not see Server 2012 R2, I see Server 2012?The first SUP sync has to be successfull in order for those products to appear. Have you already examined wsyncmgr.log?
Torsten Meringer | http://www.mssccmfaq.de -
NETWORK PRINTER INVENTORY IN SYSTEM CENTRE CONFIGURATION MANAGER (SCCM 2012).
SCCM HW inventory agent runs as the ‘SYSTEM’ and cannot see the end-users network drives and printers. The following two step process will help circumvent the above stated limitation.
1) CREATE HKEY_LOCAL_MACHINE\SOFTWARE\SCCMINVENTORY\NETWORKPRINTERS PATH IN THE REGISTRY.
Create a SCCM package.
The package should run as administrator.
The package should run whether or not a user is logged on.
POWERSHELL PACKAGE 1 (Prerequisite):
if (!(Test-Path HKLM:\SOFTWARE\SCCMINVENTORY)) {new-item HKLM:\SOFTWARE\SCCMINVENTORY -ErrorAction SilentlyContinue}
$perm = get-acl HKLM:\SOFTWARE\SCCMINVENTORY -ErrorAction SilentlyContinue
$rule = New-Object System.Security.AccessControl.RegistryAccessRule("Authenticated Users","FullControl", "ContainerInherit, ObjectInherit", "InheritOnly", "Allow") -ErrorAction SilentlyContinue
$perm.SetAccessRule($rule)
Set-Acl -Path HKLM:\SOFTWARE\SCCMINVENTORY $perm -ErrorAction SilentlyContinue
if (!(Test-Path HKLM:\SOFTWARE\SCCMINVENTORY\NETWORKPRINTERS)) {new-item HKLM:\SOFTWARE\SCCMINVENTORY\NETWORKPRINTERS -ErrorAction SilentlyContinue}
SAVE POWERSHELL FILE AS: PrinterInvRegSetup.ps1
SETUP THE SCCM PACKAGE/PROGRAM WITH COMMAND LINE:
%SYSTEMROOT%\System32\WindowsPowerShell\v1.0\PowerShell.exe -NonInteractive -WindowStyle Hidden -noprofile -ExecutionPolicy Bypass -file .\PrinterInvRegSetup.ps1
2) CAPTURE CURRENT USER’S PRINTERS AND WRITE THOSE ENTRIES TO THE ABOVE CREATED REGISTRY KEYS.
Create a SCCM package
The package should be run only when a user is logged in.
POWERSHELL PACKAGE 2 (Main):
$printers = Get-WMIObject -class Win32_Printer -ErrorAction SilentlyContinue|select-Object -Property ServerName,ShareName,Location,DriverName,PrintProcessor,PortName,Local |Where-Object {$_.Local -ne $true}-ErrorAction SilentlyContinue
ForEach($printer in $printers){
$PServerName= $printer.ServerName -replace ('\\','')
$PShareName = $printer.ShareName
$PLocation = $printer.Location
$PDriverName = $printer.DriverName
$PPrintProcessor = $printer.PrintProcessor
$PPortName = $printer.PortName
if ((Test-Path HKLM:\SOFTWARE\SCCMINVENTORY\NETWORKPRINTERS)) {
if ((Test-Path "HKLM:\SOFTWARE\SCCMINVENTORY\NETWORKPRINTERS\$PShareName on $PServerName")) {
Remove-item "HKLM:\SOFTWARE\SCCMINVENTORY\NETWORKPRINTERS\$PShareName on $PServerName" -Force -ErrorAction SilentlyContinue
New-item "HKLM:\SOFTWARE\SCCMINVENTORY\NETWORKPRINTERS\$PShareName on $PServerName" -ErrorAction SilentlyContinue
New-ItemProperty "HKLM:\SOFTWARE\SCCMINVENTORY\NETWORKPRINTERS\$PShareName on $PServerName" -Name "PrintServer" -Value $PServerName -PropertyType "String" -ErrorAction SilentlyContinue
New-ItemProperty "HKLM:\SOFTWARE\SCCMINVENTORY\NETWORKPRINTERS\$PShareName on $PServerName" -Name "PrinterQueue" -Value $PShareName -PropertyType "String" -ErrorAction SilentlyContinue
New-ItemProperty "HKLM:\SOFTWARE\SCCMINVENTORY\NETWORKPRINTERS\$PShareName on $PServerName" -Name "PrinterLocation" -Value $PLocation -PropertyType "String" -ErrorAction SilentlyContinue
New-ItemProperty "HKLM:\SOFTWARE\SCCMINVENTORY\NETWORKPRINTERS\$PShareName on $PServerName" -Name "PrinterDriver" -Value $PDriverName -PropertyType "String" -ErrorAction SilentlyContinue
New-ItemProperty "HKLM:\SOFTWARE\SCCMINVENTORY\NETWORKPRINTERS\$PShareName on $PServerName" -Name "PrintProcessor" -Value $PPrintProcessor -PropertyType "String" -ErrorAction SilentlyContinue
New-ItemProperty "HKLM:\SOFTWARE\SCCMINVENTORY\NETWORKPRINTERS\$PShareName on $PServerName" -Name "PrinterPortName" -Value $PPortName -PropertyType "String" -ErrorAction SilentlyContinue
New-ItemProperty "HKLM:\SOFTWARE\SCCMINVENTORY\NETWORKPRINTERS\$PShareName on $PServerName" -Name "DateInventoried" -Value $(get-date) -PropertyType "String" -ErrorAction SilentlyContinue
SAVE POWERSHELL FILE AS: NetworkPrinterInventory.ps1
SETUP THE SCCM PACKAGE/PROGRAM WITH COMMAND LINE:
%SYSTEMROOT%\System32\WindowsPowerShell\v1.0\PowerShell.exe -NonInteractive -WindowStyle Hidden -noprofile -ExecutionPolicy Bypass -file .\NetworkPrinterInventory.ps1
3) CREATE A DEPLOYMENT AND SET IT TO ‘RUN ALWAYS’ AND MAKE IT A REQUIREMENT.
Now deploy the second package and set the first package as a prerequisite (Check the box – Always run the prerequisite package)
The deployment should be set to run every 4 hours and ‘Always rerun’. Mark the deployment as required.
4) ADD THE FOLLOWING IN BETWEEN THE EXTENSION SECTION WITHIN YOUR CONFIGURATION.MOF.
//========================
// Added extensions Start
//========================
#pragma namespace ("\\\\.\\root\\cimv2")
#pragma deleteclass("NETWORKPRINTERS", NOFAIL)
[dynamic, provider("RegProv"), ClassContext("Local|HKEY_LOCAL_MACHINE\\SOFTWARE\\SCCMINVENTORY\\NETWORKPRINTERS")]
Class NETWORKPRINTERS
[key] string KeyName;
[PropertyContext("PrintServer")] String PrintServer;
[PropertyContext("PrinterQueue")] String PrinterQueue;
[PropertyContext("PrinterLocation")] String PrinterLocation;
[PropertyContext("PrinterDriver")] String PrinterDriver;
[PropertyContext("PrintProcessor")] String PrintProcessor;
[PropertyContext("PrinterPortName")] String PrinterPortName;
[PropertyContext("DateInventoried")] String DateInventoried;
//========================
// Added extensions end
//========================
5) SAVE THE BELOW DATA INTO A FILE CALLED ‘AWESOME.MOF’.
#pragma namespace (“\\\\.\\root\\cimv2\\SMS”)
#pragma deleteclass(“NETWORKPRINTERS”, NOFAIL)
[SMS_Report(TRUE),SMS_Group_Name("NETWORKPRINTERS"),SMS_Class_ID("NETWORKPRINTERS")]
Class NETWORKPRINTERS: SMS_Class_Template
[SMS_Report(TRUE),key] string KeyName;
[SMS_Report(TRUE)] String PrintServer;
[SMS_Report(TRUE)] String PrinterQueue;
[SMS_Report(TRUE)] String PrinterLocation;
[SMS_Report(TRUE)] String PrinterDriver;
[SMS_Report(TRUE)] String PrintProcessor;
[SMS_Report(TRUE)] String PrinterPortName;
[SMS_Report(TRUE)] String DateInventoried;
6) IMPORT ‘AWESOME.MOF’ INTO SCCM DEFAULT CLIENT SETTINGS.
Either import the above MOF file into the Client Setting/Default Client Settings/Hardware Inventory/Classes/Import. Select the option to import every thing.
Alternatively, if you have compiled the MOF manually on the PC, Add a new reporting class by clicking the ‘Add’ button and connecting to the PC and selecting the WMI class ‘NETWORKPRINTERS‘
and that is it. The SCCM resource explorer should soon see the Network Printers.
Now, this is a convoluted process but this is the only way I can inventory Network printers. Any ideas or suggestions?All the other ways are similar because this is a per-user setting.
http://blogs.technet.com/b/breben/archive/2013/08/26/inventory-mapped-drives-in-configmgr-2012.aspx
Juke Chou
TechNet Community Support -
IBM Endpoint Manager / BigFix Versus System Center Configuration Manager
Hi All,
My organization's security team (which I'm not on) has been tasked with researching patching solutions for our environment which includes mostly Windows workstations but a good amount of Linux systems as well. Total amount of workstations covered
is approximately 13,000 spread across about five main sites.
We've been using SMS 2003 / SCCM 2007 for over a decade but unfortunately the out-of-the-box Linux support in the patching arena remains to be relatively limited even in the most recent versions of SCCM. We've also had SCCM client health
issues which has hindered the deployment of some patches and/or patching status reporting. Recently, we've written a few scripts to help with the client health issues but the Linux support issue still remain.
The current proposal, which I'm reviewing, is to move all Linux and Windows patching over to use the IBM Endpoint Manager (BigFix) product. To this end, I've got a few questions to throw out there for general feedback.
1) Has anyone had any real-life positive or negative experiences with IBM Endpoint Manager they'd like to share, especially in relation to the patching component?
2) Has anyone had any real-life positive or negative experiences with using SCCM + another plugin product for SCCM that they'd be willing to share?
3) Has anyone attempted to integrate BigFix patch deployment into SCCM OSD deployment and/or have thoughts on how to prevent SCCM mandatory deployments from interfering with BigFix activity.
Any feedback is appreciated, thanks!Yes, I know this is an old post, but I’m trying to clean them up.
You should post this question in an IBM forum
There are lots of blogs that talk about using CM07 with 3<sup>rd</sup> party patching tools. There is where I would start.
This question should be posted to a Bigfix forum.
Garth Jones | My blogs: Enhansoft and
Old Blog site | Twitter:
@GarthMJ -
System Center Configuration Manager input reports in Sharepoint
This might be a tricky one.
I have a report that I use, and input is the user name. The username gives me the PC name, and that gives me the option for copy / paste the PC-name into my remote viewer.
Is it possible to implement Computers for a specific user name into my sharepoint?
This topic first appeared in the Spiceworks CommunityIt does not depend on the number of distribution points.
That marketing material you link to is from 2009 and was inaccurate even back then. Take a look at the Gartner research - Altiris is a dying product that's stopped even trying to compete with ConfigMgr.
If you want things to deploy fast, that is certainly possible to do. There are customers who expect software to be installed in less than 5 minutes by ConfigMgr. This is achievable, but has trade offs. ConfigMgr is designed to manage hundreds
of thousands of devices, so by default it isn't set up to do things instantly.
How often are your clients checking for policy?
How often is the collection you are deploying to updated?
As soon as the client finds out about a required deployment (by downloading policy about being in a collection with a deployment), it will start trying to download the content for the deployment from the distribution point and then run the program. Make
sure the device gets in the collection right away and have the client check in more often, and the install will start quicker. But, that will put more load on your management points.
Nash Pherson, Senior Systems Consultant
Now Micro -
My Blog Posts
If you've found a bug or want the product worked differently,
share your feedback.
<-- If this post was helpful, please click "Vote as Helpful". -
System Center Orchestrator connectivity with System Center Operations Manager
Hi,
I am trying to connect my SCORCH setup with my SCOM server. When I enter the SCOM Server Name or IP Address, Domain, USer id, and Password in the Connectivity Prompt of SCORCH, and click on TEST Connections, I see a red error prompt with the labl error
and nothing written on it. the user id has rights on both SCORCH and SCOM environment.
Is there a log file that I can refer to validate the exact error that is happening when I connectin SCORCH with SCOM?
Thanks
Sandeep C
Sandeep C Learn more about IT @ schadda.blogspot.com Please mark this post as helpful if it was helpful :) Also mark it as a proposed answer if it turns out to be the final solutionStefan is right.
You need to install the OM Console
"Install the Operations Manager console on each computer where an Orchestrator Runbook server or Runbook Designer is installed, if that server needs to interact with Operations
Manager"
Described here: http://technet.microsoft.com/en-us/library/hh830690 -
Windows Azure application with System Center 2012
Hi Team,
We are able to add the Azure subscription to SCOM 2012. but when we are configuring the adding monitoring wizard unable to discover the Azure service,azure storage and VM's in the subscription. Could you please let me know why I'm unable to discover
the Azure service,Azure storage and VM's in the subscription using monitoring wizardHi,
Download the System Center Management Pack for Windows Azure:
http://www.microsoft.com/en-us/download/details.aspx?id=38414 and execute the .msi on the server where Operations
Manager 2012 w/SP1 is installed. Install files either in the default directory specified or another directory of your choice.
For more information, please review the link below:
Monitoring Windows Azure with System Center Operations Manager 2012
http://blogs.technet.com/b/cbernier/archive/2013/10/23/monitoring-windows-azure-with-system-center-operations-manager-2012-get-me-started.aspx
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected] -
Configuration manager requires microsoft sql server 2008 sp2 with cumulative update 9 or higher
Hi,
I have this error during setup of SCCM 2012 R2 to a sql server. Patch level is higher then what is mentioned in popup.
Please advise.
Note: build of SQL is 10.50.4000
J.
Jan HoedtThanks. There is no c:\configmgrprereq.log but there is a configmgrsetup.log:
INFO: setupdl.exe: Finish $$<Configuration Manager Setup><12-16-2013 13:33:10.799-60><thread=1660 (0x67C)>
CWmiRegistry::GetStr: Failed to get string value MSSQLSERVER $$<Configuration Manager Setup><12-16-2013 13:34:56.756-60><thread=3068 (0xBFC)>
Failed to retrieve SQL Server instance name[MSSQLSERVER]. $$<Configuration Manager Setup><12-16-2013 13:34:56.761-60><thread=3068 (0xBFC)>
WARNING: failed to retrieve port number for SQL.ourcompany.com. $$<Configuration Manager Setup><12-16-2013 13:34:56.763-60><thread=3068 (0xBFC)>
WARNING: failed to retrieve port number for SQL.ourcompany.com. $$<Configuration Manager Setup><12-16-2013 13:34:56.763-60><thread=3068 (0xBFC)>
INFO: Registered type SQL.ourcompany.com MASTER for SQL.ourcompany.com master $$<Configuration Manager Setup><12-16-2013 13:34:56.763-60><thread=3068 (0xBFC)>
INFO: Registered type SMS Master for SQL.ourcompany.com master $$<Configuration Manager Setup><12-16-2013 13:34:56.764-60><thread=3068 (0xBFC)>
INFO: Registered type SQL.ourcompany.com SCCM2012R2 for SQL.ourcompany.com SCCM2012R2 $$<Configuration Manager Setup><12-16-2013 13:34:56.764-60><thread=3068 (0xBFC)>
INFO: Registered type SMS ACCESS for SQL.ourcompany.com SCCM2012R2 $$<Configuration Manager Setup><12-16-2013 13:34:56.764-60><thread=3068 (0xBFC)>
*** [08001][14][Microsoft][ODBC SQL Server Driver][DBNETLIB]Invalid connection. $$<Configuration Manager Setup><12-16-2013 13:35:57.478-60><thread=3068 (0xBFC)>
*** [01000][14][Microsoft][ODBC SQL Server Driver][DBNETLIB]ConnectionOpen (Invalid Instance()). $$<Configuration Manager Setup><12-16-2013 13:35:57.478-60><thread=3068 (0xBFC)>
*** Failed to connect to the SQL Server, connection type: SQL.ourcompany.com MASTER. $$<Configuration Manager Setup><12-16-2013 13:35:57.479-60><thread=3068 (0xBFC)>
*** [08001][14][Microsoft][ODBC SQL Server Driver][DBNETLIB]Invalid connection. $$<Configuration Manager Setup><12-16-2013 13:36:58.135-60><thread=3068 (0xBFC)>
*** [01000][14][Microsoft][ODBC SQL Server Driver][DBNETLIB]ConnectionOpen (Invalid Instance()). $$<Configuration Manager Setup><12-16-2013 13:36:58.135-60><thread=3068 (0xBFC)>
*** Failed to connect to the SQL Server, connection type: SQL.ourcompany.com MASTER. $$<Configuration Manager Setup><12-16-2013 13:36:58.136-60><thread=3068 (0xBFC)>
Could the error be related to other prereqs not met?
Jan Hoedt -
SCOM 2012: Report Viewer / SQL Server 2012 CLR??
Hello,
I am trying to install an Operations Console to a Management Server and it request
1. Report Viewer
Then I tried to install Report Viewer then it requests:
Microsoft System CLR Types for SQL Server 2012
These are ne for SCOM 2012?
I check the MS in SCOM 2007 R2 there is no SQL module installed...
Any clue?
How to install this report viewer is it included in another product? Should I use SQL ?
I don't have any SQL module on this management server
Thanks,
Dom
System Center Operations Manager 2007 / System Center Configuration Manager 2007 R2 / Forefront Client Security / Forefront Identity ManagerHi,
I hope this can help you:
http://thoughtsonopsmgr.blogspot.dk/2013/10/upgrading-to-scom-2012-r2-rtm-report.html
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. -
System Center Operations Manager 2007
Hi,
Is there anyone who is monitoring their IronPort C-series with System Center Operations Manager 2007?
If so, is there anything I should look out for implementing it?
/FredrikHi
If scom supports SNMP, then we can monitor Ironport devices. We can monitor Ironport via Solarwinds and Hp openview.
Maybe you are looking for
-
ORA-12154 when using Database Link
We're running 11r2 on our servers. I have a primary db and a standby db, using Data Guard. The standby is open for read-only querying. We are not using ASM. The primary (and thus the standby) have a PUBLIC database link to a third db server. When I r
-
Crazy Exception blocked my RMI server
Hi all one crazy exception is thrown when I try to start the server. Plz reply me the the possible cause and solution. thanks in advance The exception is : Error starting service java.rmi.server.ExportException: Listen failed on port: 0; nested excep
-
CRM ORDER CHANGE / CRM_ORDER_MAINTAIN
Hi Max. Firt of all, Let me thank you for taking the time and replying to my question. Thank you again. Now, Inyour reply, you said that it is a little tricky on how we fill in the BAPI structures, can you please explain how. I did try your advise wi
-
Premiere Pro CC very buggy timeline
Hi everyone! I can't seem to find a relevant answer to this problem I've been having with Premiere Pro CC. Basically, I have a timeline with four video angles (not trying a multiclip edit; they are just in the timeline) and a few sources of audio. As
-
Alright folks. I'd like to use Labview to convert a csv into an xls spreadsheet file. I was thinking labview could open the spreadsheet, search for the commas "," and convert them into a "/t". is there a search function that does this? Solved! Go