Sql server 2012 installation error
can someone please tell me why i am getting an error when i am trying to install sql 2012 SP1. it when i get to the installation it says "sql server Setup has encountered the following error. hexadecimal value 0x00, is an invalid character.Line
1, position 51471. error code 0x84B10001.
Hi vijatkumar.ptl,
According to your description and your error message, when you install SQL Server 2012, check if splinters of an MSDE instance (Microsoft Desktop Engine) was left over from other program. If this hidden instance exists, and the installer perform the RunDiscoveryAction
process, the issue will occur. So I recommend you manually remove a Microsoft SQL Server
Desktop Engine instance (MSDE) by using Add/Remove Programs in Control Panel, and so on, then reinstall again.
There is a similar issue about SQL Server 2012 setup issue, you can refer to the following posts.
http://social.msdn.microsoft.com/Forums/sqlserver/en-US/72fbd726-730b-4aef-9db1-aeb8bfb5d334/sql-2012-setup-issues-hexadecimal-value-0x00-is-an-invalid-character
http://social.msdn.microsoft.com/Forums/sqlserver/en-US/f37e18eb-f1ab-4106-83f6-8bbf04d6a41a/setup-failed-0x84b10001-sql-2012-hexadecimal-value-0x00-is-an-invalid-character-line-1-position?forum=sqlsetupandupgrade
Regards,
Sofiya Li
Sofiya Li
TechNet Community Support
Similar Messages
-
After
sql server 2012 installation, I attached my production db. Because of some reasons, i
changed sql engine account from network service user to system user by means of sql server configuration manager.
Now , there isn’t
a problem at sql server running system. But
I have doubts that
this can produce problems later. Because sql server database engine account must have privileges that listed below;
Log on as a service (SeServiceLogonRight)
Replace a process-level token (SeAssignPrimaryTokenPrivilege)
Bypass traverse checking (SeChangeNotifyPrivilege)
Adjust memory quotas for a process
(SeIncreaseQuotaPrivilege)
Permission to start SQL Writer
Permission to read the Event Log service
Permission to read the Remote Procedure Call service
While sql server installation, setup gives these
privileges to network service user automatically, but changing user by means of sql confugarition manager does not give these
privileges.
Now, system user has privileges listed below. And sql server has been running for 1,5 months without any problems.
Log on as a service (SeServiceLogonRight)
Bypass traverse checking
(SeChangeNotifyPrivilege) (Everyone user has his privileges. So i think that system user has this privilege also)
What problems can occur because of this situation? Shall i give other privileges to system user and restart sql server or not? And how can i give these privileges to system user listed below;
Replace a process-level token (
this can be set from user rights assignments)
Adjust memory quotas for a process
(this can be set from user rights assignments)
Permission to start SQL Writer (
? - give advice )
Permission to read the Event Log service (
? - give advice )
Permission to read the Remote Procedure Call service (
? - give advice )Our server is windows server 2008 r2 enterprise edition. I have looked the bunch of permissions in user rights menu that is in local security policy settings gui.
And i have seen those permissions below were not granted to system user;
Bypass traverse checking (SeChangeNotifyPrivilege)
Adjust memory quotas for a process
(SeIncreaseQuotaPrivilege)
So, briefly you say, don't panic ? -
SQL Server 2012 installation and to default user database files to a particular path
Hi, I am working on SQL Server 2012 installation on one of our test boxes and I would like to configure the sql server install binaries and all the system databases but for tempdb to be in my C and tempdb on a different drive and once all this is set up,
whenever a developer creates a new database without specifying the path for the mdf & ldf files. They should be defaulted to a path like "D:/Data file" & "D:/Log file" for instance instead of being created on the C drive.
Thanks in advance.........
IoneHi,
You can of course set default location of database through management Studio please refer below link. Once you change default location even if you do not specify location it would take default one.
http://sqlandme.com/2013/03/18/sql-server-changing-default-database-location-for-server/
I would advise you not to keep files on C drive let it be dedicated system drive also its quite possible that SQL server service account would not have privilege on C drive so after you move tempdb SQL server would not come online as tempdb files cannot
be created . Tempdb is always recreated after SQL Server starts so you just need to change location once using Alter database command
See example mentioned in below link for how to do that
http://msdn.microsoft.com/en-us/library/ms345408%28SQL.90%29.aspx
Please mark this reply as answer if it solved your issue or vote as helpful if it helped so that other forum members can benefit from it.
My TechNet Wiki Articles -
I am installing SQL Server 2012 Developer (from ISO image written on DVD), my machine has Windows 7 (Edit: Windows 7 with service pack 1) on it. This machine already has SQL Express and SQL 2008 R2 Express installed in it.
On running 2012 setup it goes fine from Setup Support Rules to Installation Progress. In Installation Progress after some progress installation fails.
Windows show the following components couldn't installed:
Managment Tools Complete Failed. Client Tools Connectivity Failed. Client Tools SDK Failed. Client Tools Backwards Compantibility Failed. Managment Tools Basic Failed. SQL Server Data Tools Failed. Reporting Services -Native Failed. Database Engine
Services Failed. Data Quality Services Failed. full-Text and Semantic Extractins for Search Failed. SQL Server Replication Failed. Integration Services Failed. Analysis Services Failed. SQL Client Connectivity SDK Failed.
In detail for failure of every component it provide these details:
Action required:
Use the following information to resolve the error, and then try the setup process again.
Feature failure reason:
An error occurred for a dependency of the feature causing the setup process for the feature to fail.
In summary log file it provide the following details:
Overall summary:
Final result: Failed: see details below
Exit code (Decimal): -2068643839
Start time: 2012-07-31 16:23:37
End time: 2012-07-31 16:33:32
Requested action: Install
Setup completed with required actions for features.
Troubleshooting information for those features:
Next step for Adv_SSMS: Use the following information to resolve the error, and then try the setup process again.
Next step for Conn: Use the following information to resolve the error, and then try the setup process again.
Next step for SDK: Use the following information to resolve the error, and then try the setup process again.
Next step for BC: Use the following information to resolve the error, and then try the setup process again.
Next step for SSMS: Use the following information to resolve the error, and then try the setup process again.
Next step for BIDS: Use the following information to resolve the error, and then try the setup process again.
Next step for RS: Use the following information to resolve the error, and then try the setup process again.
Next step for SQLEngine: Use the following information to resolve the error, and then try the setup process again.
Next step for DQ: Use the following information to resolve the error, and then try the setup process again.
Next step for FullText: Use the following information to resolve the error, and then try the setup process again.
Next step for Replication: Use the following information to resolve the error, and then try the setup process again.
Next step for IS: Use the following information to resolve the error, and then try the setup process again.
Next step for AS: Use the following information to resolve the error, and then try the setup process again.
Next step for SNAC_SDK: Use the following information to resolve the error, and then try the setup process again.
Machine Properties:
Machine name: Haansi-PC
Machine processor count: 4
OS version: Windows 7
OS service pack: Service Pack 1
OS region: United States
OS language: English (United States)
OS architecture: x64
Process architecture: 64 Bit
OS clustered: No
Product features discovered:
Product Instance Instance ID
Feature Language
Edition Version Clustered
SQL Server 2005 SQLEXPRESS MSSQL.1
Database Engine Services 1033 Express Edition
9.4.5000 No
SQL Server 2005 SQLEXPRESS MSSQL.1
SQL Server Replication 1033 Express Edition
9.4.5000 No
SQL Server 2005 SQLEXPRESS MSSQL.1
SharedTools 1033
Express Edition 9.4.5000 No
SQL Server 2005
Tools 1033
Express Edition 9.4.5000 No
SQL Server 2005
ToolsClient 1033
Express Edition 9.4.5000 No
SQL Server 2005
ToolsClient\Connectivity 1033 Express Edition
9.4.5000 No
SQL Server 2008 R2 SQLSERVER08EXPR2 MSSQL10_50.SQLSERVER08EXPR2 Database Engine Services 1033
Express Edition 10.50.1617.0 No
SQL Server 2008 R2 SQLSERVER08EXPR2 MSSQL10_50.SQLSERVER08EXPR2 SQL Server Replication 1033
Express Edition 10.50.1617.0 No
SQL Server 2008 R2
Management Tools - Basic 1033 Express Edition
10.50.1617.0 No
SQL Server 2012
LocalDB 1033
Express Edition 11.0.2318.0 No
SQL Server 2012
Reporting Services - SharePoint
11.0.2100.60 No
Package properties:
Description: Microsoft SQL Server 2012
ProductName: SQL Server 2012
Type: RTM
Version: 11
SPLevel: 0
Installation location: F:\x64\setup\
Installation edition: Developer
Product Update Status:
None discovered.
User Input Settings:
ACTION: Install
ADDCURRENTUSERASSQLADMIN: false
AGTSVCACCOUNT: NT Service\SQLAgent$SS2012
AGTSVCPASSWORD: *****
AGTSVCSTARTUPTYPE: Manual
ASBACKUPDIR: C:\Program Files\Microsoft SQL Server\MSAS11.SS2012\OLAP\Backup
ASCOLLATION: Latin1_General_CI_AS
ASCONFIGDIR: C:\Program Files\Microsoft SQL Server\MSAS11.SS2012\OLAP\Config
ASDATADIR: C:\Program Files\Microsoft SQL Server\MSAS11.SS2012\OLAP\Data
ASLOGDIR: C:\Program Files\Microsoft SQL Server\MSAS11.SS2012\OLAP\Log
ASPROVIDERMSOLAP: 1
ASSERVERMODE: TABULAR
ASSVCACCOUNT: NT Service\MSOLAP$SS2012
ASSVCPASSWORD: <empty>
ASSVCSTARTUPTYPE: Manual
ASSYSADMINACCOUNTS: PC\Haansi
ASTEMPDIR: C:\Program Files\Microsoft SQL Server\MSAS11.SS2012\OLAP\Temp
BROWSERSVCSTARTUPTYPE: Automatic
CLTCTLRNAME: <empty>
CLTRESULTDIR: <empty>
CLTSTARTUPTYPE: 0
CLTSVCACCOUNT: <empty>
CLTSVCPASSWORD: <empty>
CLTWORKINGDIR: <empty>
COMMFABRICENCRYPTION: 0
COMMFABRICNETWORKLEVEL: 0
COMMFABRICPORT: 0
CONFIGURATIONFILE: C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log\20120731_161013\ConfigurationFile.ini
CTLRSTARTUPTYPE: 0
CTLRSVCACCOUNT: <empty>
CTLRSVCPASSWORD: <empty>
CTLRUSERS: <empty>
ENABLERANU: false
ENU: true
ERRORREPORTING: false
FEATURES: SQLENGINE, REPLICATION, FULLTEXT, DQ, AS, RS, BIDS, CONN, IS, BC, SDK, SSMS, ADV_SSMS, SNAC_SDK
FILESTREAMLEVEL: 0
FILESTREAMSHARENAME: <empty>
FTSVCACCOUNT: NT Service\MSSQLFDLauncher$SS2012
FTSVCPASSWORD: <empty>
HELP: false
INDICATEPROGRESS: false
INSTALLSHAREDDIR: C:\Program Files\Microsoft SQL Server\
INSTALLSHAREDWOWDIR: C:\Program Files (x86)\Microsoft SQL Server\
INSTALLSQLDATADIR: <empty>
INSTANCEDIR: C:\Program Files\Microsoft SQL Server\
INSTANCEID: SS2012
INSTANCENAME: SS2012
ISSVCACCOUNT: NT Service\MsDtsServer110
ISSVCPASSWORD: <empty>
ISSVCSTARTUPTYPE: Automatic
MATRIXCMBRICKCOMMPORT: 0
MATRIXCMSERVERNAME: <empty>
MATRIXNAME: <empty>
NPENABLED: 0
PID: *****
QUIET: false
QUIETSIMPLE: false
ROLE: <empty>
RSINSTALLMODE: DefaultNativeMode
RSSHPINSTALLMODE: DefaultSharePointMode
RSSVCACCOUNT: NT Service\ReportServer$SS2012
RSSVCPASSWORD: <empty>
RSSVCSTARTUPTYPE: Manual
SAPWD: <empty>
SECURITYMODE: <empty>
SQLBACKUPDIR: <empty>
SQLCOLLATION: SQL_Latin1_General_CP1_CI_AS
SQLSVCACCOUNT: NT Service\MSSQL$SS2012
SQLSVCPASSWORD: <empty>
SQLSVCSTARTUPTYPE: Automatic
SQLSYSADMINACCOUNTS: Haansi-PC\Haansi
SQLTEMPDBDIR: <empty>
SQLTEMPDBLOGDIR: <empty>
SQLUSERDBDIR: <empty>
SQLUSERDBLOGDIR: <empty>
SQMREPORTING: false
TCPENABLED: 0
UIMODE: Normal
UpdateEnabled: true
UpdateSource: MU
X86: false
Configuration file: C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log\20120731_161013\ConfigurationFile.ini
Detailed results:
Feature: Management Tools - Complete
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, and then try the setup process again.
Feature: Client Tools Connectivity
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, and then try the setup process again.
Feature: Client Tools SDK
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, and then try the setup process again.
Feature: Client Tools Backwards Compatibility
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, and then try the setup process again.
Feature: Management Tools - Basic
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, and then try the setup process again.
Feature: SQL Server Data Tools
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, and then try the setup process again.
Feature: Reporting Services - Native
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, and then try the setup process again.
Feature: Database Engine Services
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, and then try the setup process again.
Feature: Data Quality Services
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, and then try the setup process again.
Feature: Full-Text and Semantic Extractions for Search
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, and then try the setup process again.
Feature: SQL Server Replication
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, and then try the setup process again.
Feature: Integration Services
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, and then try the setup process again.
Feature: Analysis Services
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, and then try the setup process again.
Feature: SQL Client Connectivity SDK
Status: Failed: see logs for details
Reason for failure: An error occurred during the setup process of the feature.
Next Step: Use the following information to resolve the error, and then try the setup process again.
Rules with failures:
Global rules:
Scenario specific rules:
Rules report file: C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log\20120731_161013\SystemConfigurationCheck_Report.htmPlease help.
I did what you suggested, but, still got error message to install SQL server data tools: Here is the log.
Overall summary:
Final result: Failed: see details below
Exit code (Decimal): -2068037632
Start time: 2014-09-29 15:05:38
End time: 2014-09-29 15:15:55
Requested action: Install
Setup completed with required actions for features.
Troubleshooting information for those features:
Next step for SSDTBI_VS2012: Use the following information to resolve the error, and then try the setup process again.
Machine Properties:
Machine name: MSBI
Machine processor count: 4
OS version: Future Windows Version
OS service pack:
OS region: United States
OS language: English (United States)
OS architecture: x64
Process architecture: 32 Bit
OS clustered: No
Product features discovered:
Product Instance Instance ID Feature
Language Edition Version Clustered Configured
SQL Server 2008 Management Tools - Basic
1033 Express Edition 10.0.1600.22 No Yes
SQL Server 2012 MSSQLSERVER MSSQL11.MSSQLSERVER Database Engine Services 1033
Enterprise Evaluation Edition 11.0.2100.60 No Yes
SQL Server 2012 MSSQLSERVER MSSQL11.MSSQLSERVER SQL Server Replication 1033
Enterprise Evaluation Edition 11.0.2100.60 No Yes
SQL Server 2012 MSSQLSERVER MSSQL11.MSSQLSERVER Full-Text and Semantic Extractions for Search 1033
Enterprise Evaluation Edition 11.0.2100.60 No Yes
SQL Server 2012 MSSQLSERVER MSSQL11.MSSQLSERVER Data Quality Services 1033
Enterprise Evaluation Edition 11.0.2100.60 No Yes
SQL Server 2012 MSSQLSERVER MSAS11.MSSQLSERVER Analysis Services 1033
Enterprise Evaluation Edition 11.0.2100.60 No Yes
SQL Server 2012 MSSQLSERVER MSRS11.MSSQLSERVER Reporting Services - Native 1033
Enterprise Evaluation Edition 11.0.2100.60 No Yes
SQL Server 2012 Management Tools - Basic
1033 Enterprise Evaluation Edition 11.0.2100.60 No Yes
SQL Server 2012 Management Tools - Complete
1033 Enterprise Evaluation Edition 11.0.2100.60 No Yes
SQL Server 2012 Client Tools Connectivity
1033 Enterprise Evaluation Edition 11.0.2100.60 No Yes
SQL Server 2012 Client Tools Backwards Compatibility
1033 Enterprise Evaluation Edition 11.0.2100.60 No Yes
SQL Server 2012 Client Tools SDK
1033 Enterprise Evaluation Edition 11.0.2100.60 No Yes
SQL Server 2012 SQL Server Data Tools
1033 Enterprise Evaluation Edition 11.0.2100.60 No Yes
SQL Server 2012 Integration Services
1033 Enterprise Evaluation Edition 11.0.2100.60 No Yes
SQL Server 2012 Reporting Services - SharePoint
11.0.2100.60 No Yes
Package properties:
Description: Microsoft SQL Server 2012 Service Pack 1
ProductName: SQL Server 2012
Type: RTM
Version: 11
Installation location: C:\9f7a58aa5d6d76ffe6be968a4ad339f5\x86\setup\
Installation edition: Express
Slipstream: True
SP Level 1
Patch Level: 11.1.3128.0
Product Update Status:
Success: KB 2674319, KB 2793634
Product Updates Selected for Installation:
Title: Service Pack 1
Knowledge Based Article: KB 2674319
Version: 11.1.3000.0
Architecture: x86
Language: 1033
Title: SQL Server 2012 SP1 GDR Product Update
Knowledge Based Article: KB 2793634
Version: 11.1.3128.0
Architecture: x86
Language: All
Update Source: MU
User Input Settings:
ACTION: Install
ADDCURRENTUSERASSQLADMIN: true
AGTSVCACCOUNT: <empty>
AGTSVCPASSWORD: <empty>
AGTSVCSTARTUPTYPE: Manual
ASBACKUPDIR: Backup
ASCOLLATION: Latin1_General_CI_AS
ASCONFIGDIR: Config
ASDATADIR: Data
ASLOGDIR: Log
ASPROVIDERMSOLAP: 1
ASSERVERMODE: MULTIDIMENSIONAL
ASSVCACCOUNT: <empty>
ASSVCPASSWORD: <empty>
ASSVCSTARTUPTYPE: Automatic
ASSYSADMINACCOUNTS: <empty>
ASTEMPDIR: Temp
BROWSERSVCSTARTUPTYPE: Disabled
CLTCTLRNAME: <empty>
CLTRESULTDIR: <empty>
CLTSTARTUPTYPE: 0
CLTSVCACCOUNT: <empty>
CLTSVCPASSWORD: <empty>
CLTWORKINGDIR: <empty>
COMMFABRICENCRYPTION: 0
COMMFABRICNETWORKLEVEL: 0
COMMFABRICPORT: 0
CONFIGURATIONFILE:
CTLRSTARTUPTYPE: 0
CTLRSVCACCOUNT: <empty>
CTLRSVCPASSWORD: <empty>
CTLRUSERS: <empty>
ENABLERANU: false
ENU: true
ERRORREPORTING: true
FEATURES: SSDTBI_VS2012, SNAC_SDK
FILESTREAMLEVEL: 0
FILESTREAMSHARENAME: <empty>
FTSVCACCOUNT: <empty>
FTSVCPASSWORD: <empty>
HELP: false
IACCEPTSQLSERVERLICENSETERMS: true
INDICATEPROGRESS: false
INSTALLSHAREDDIR: C:\Program Files\Microsoft SQL Server\
INSTALLSHAREDWOWDIR: C:\Program Files (x86)\Microsoft SQL Server\
INSTALLSQLDATADIR: <empty>
INSTANCEDIR: C:\Program Files (x86)\Microsoft SQL Server\
INSTANCEID: <empty>
INSTANCENAME: <empty>
ISSVCACCOUNT: NT AUTHORITY\Network Service
ISSVCPASSWORD: <empty>
ISSVCSTARTUPTYPE: Automatic
MATRIXCMBRICKCOMMPORT: 0
MATRIXCMSERVERNAME: <empty>
MATRIXNAME: <empty>
NPENABLED: 0
PID: *****
QUIET: false
QUIETSIMPLE: false
ROLE: AllFeatures_WithDefaults
RSINSTALLMODE: DefaultNativeMode
RSSHPINSTALLMODE: DefaultSharePointMode
RSSVCACCOUNT: <empty>
RSSVCPASSWORD: <empty>
RSSVCSTARTUPTYPE: Automatic
SAPWD: <empty>
SECURITYMODE: <empty>
SQLBACKUPDIR: <empty>
SQLCOLLATION: SQL_Latin1_General_CP1_CI_AS
SQLSVCACCOUNT: <empty>
SQLSVCPASSWORD: <empty>
SQLSVCSTARTUPTYPE: Automatic
SQLSYSADMINACCOUNTS: <empty>
SQLTEMPDBDIR: <empty>
SQLTEMPDBLOGDIR: <empty>
SQLUSERDBDIR: <empty>
SQLUSERDBLOGDIR: <empty>
SQMREPORTING: true
TCPENABLED: 0
UIMODE: AutoAdvance
UpdateEnabled: true
UpdateSource: MU
X86: false
Configuration file: C:\Program Files (x86)\Microsoft SQL Server\110\Setup Bootstrap\Log\20140929_150412\ConfigurationFile.ini
Detailed results:
Feature: SQL Server Data Tools - Business Intelligence for Visual Studio 2012
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, and then try the setup process again.
Component name: Microsoft Visual Studio Tools for Applications 2012
Component error code: 0x80044000
Component log file: C:\Program Files (x86)\Microsoft SQL Server\110\Setup Bootstrap\Log\20140929_150412\VSTA2012_LangsSupport_Cpu32_1.log
Error description: VS Shell 2012 installation has failed with exit code -2147205120.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.3436.0&EvtType=VSTA2012_LangsSupport%40Install%400x-2147205120
Feature: SQL Client Connectivity
Status: Passed
Feature: SQL Client Connectivity SDK
Status: Passed
Rules with failures:
Global rules:
Scenario specific rules:
Rules report file: C:\Program Files (x86)\Microsoft SQL Server\110\Setup Bootstrap\Log\20140929_150412\SystemConfigurationCheck_Report.htm -
Hi everyone,
I am new to SQL server....I am learning C# programming using visual studio 2013 . And I want to learn SQL database language to create and practice C# database project....My computer meets all the hardware requirement for SQL installation (i.e. My computer
has window 7 OS , 80 GB freen HD and 6 GB RAM. ) Therefore I download Microsoft SQL server express 2012 try to install it in my computer (which already has visual studio).
But during installation of SQL server I have problem ...it says
the server doesn't respond in timely fashion. When I research about it everyone were saying uninstall sql and reinstall again. I uninstall and re install but still having same problem...
The database engine also not installed displaying same error.
I don't know how can i install sql server 2012 to use with visual studio in same computer.
Can somebody please help with SQL installation please ?
It will be great help.
Many thanks in advance
regards
rashHi
my summary file is :
Overall summary:
Final result: Failed: see details below
Exit code (Decimal): -2146232832
Start time: 2015-04-06 11:34:18
End time: 2015-04-06 19:04:46
Requested action: Install
Setup completed with required actions for features.
Troubleshooting information for those features:
Next step for SQLEngine: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Next step for DQ: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Next step for FullText: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Next step for Replication: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Next step for IS: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Next step for RS: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Next step for AS: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Machine Properties:
Machine name: RASHA-VAIO
Machine processor count: 4
OS version: Windows 7
OS service pack: Service Pack 1
OS region: United States
OS language: English (United States)
OS architecture: x64
Process architecture: 64 Bit
OS clustered: No
Product features discovered:
Product Instance Instance ID Feature
Language Edition Version Clustered
SQL Server 2008 SQLEXPRESS MSSQL10.SQLEXPRESS Database Engine Services 1033
Express Edition 10.1.2531.0 No
SQL Server 2008 SQLEXPRESS MSSQL10.SQLEXPRESS SQL Server Replication 1033
Express Edition 10.1.2531.0 No
Package properties:
Description: Microsoft SQL Server 2012 Service Pack 1
ProductName: SQL Server 2012
Type: RTM
Version: 11
SPLevel: 0
Installation location: E:\x64\setup\
Installation edition: Enterprise
Product Update Status:
None discovered.
User Input Settings:
ACTION: Install
ADDCURRENTUSERASSQLADMIN: false
AGTSVCACCOUNT: NT Service\SQLSERVERAGENT
AGTSVCPASSWORD: *****
AGTSVCSTARTUPTYPE: Manual
ASBACKUPDIR: C:\Program Files\Microsoft SQL Server\MSAS11.MSSQLSERVER\OLAP\Backup
ASCOLLATION: Latin1_General_CI_AS
ASCONFIGDIR: C:\Program Files\Microsoft SQL Server\MSAS11.MSSQLSERVER\OLAP\Config
ASDATADIR: C:\Program Files\Microsoft SQL Server\MSAS11.MSSQLSERVER\OLAP\Data
ASLOGDIR: C:\Program Files\Microsoft SQL Server\MSAS11.MSSQLSERVER\OLAP\Log
ASPROVIDERMSOLAP: 1
ASSERVERMODE: TABULAR
ASSVCACCOUNT: NT Service\MSSQLServerOLAPService
ASSVCPASSWORD: <empty>
ASSVCSTARTUPTYPE: Automatic
ASSYSADMINACCOUNTS: RASHA-VAIO\RASHA
ASTEMPDIR: C:\Program Files\Microsoft SQL Server\MSAS11.MSSQLSERVER\OLAP\Temp
BROWSERSVCSTARTUPTYPE: Disabled
CLTCTLRNAME: MAIN
CLTRESULTDIR: C:\Program Files (x86)\Microsoft SQL Server\DReplayClient\ResultDir\
CLTSTARTUPTYPE: Manual
CLTSVCACCOUNT: NT Service\SQL Server Distributed Replay Client
CLTSVCPASSWORD: <empty>
CLTWORKINGDIR: C:\Program Files (x86)\Microsoft SQL Server\DReplayClient\WorkingDir\
COMMFABRICENCRYPTION: 0
COMMFABRICNETWORKLEVEL: 0
COMMFABRICPORT: 0
CONFIGURATIONFILE: C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log\20150406_112342\ConfigurationFile.ini
CTLRSTARTUPTYPE: Manual
CTLRSVCACCOUNT: NT Service\SQL Server Distributed Replay Controller
CTLRSVCPASSWORD: <empty>
CTLRUSERS: RASHA-VAIO\RASHA
ENABLERANU: false
ENU: true
ERRORREPORTING: false
FEATURES: SQLENGINE, REPLICATION, FULLTEXT, DQ, AS, RS, RS_SHP, RS_SHPWFE, DQC, BIDS, CONN, IS, BC, SDK, BOL, SSMS, ADV_SSMS, DREPLAY_CTLR, DREPLAY_CLT, SNAC_SDK, MDS
FILESTREAMLEVEL: 0
FILESTREAMSHARENAME: <empty>
FTSVCACCOUNT: NT Service\MSSQLFDLauncher
FTSVCPASSWORD: <empty>
HELP: false
IACCEPTSQLSERVERLICENSETERMS: false
INDICATEPROGRESS: false
INSTALLSHAREDDIR: C:\Program Files\Microsoft SQL Server\
INSTALLSHAREDWOWDIR: C:\Program Files (x86)\Microsoft SQL Server\
INSTALLSQLDATADIR: <empty>
INSTANCEDIR: C:\Program Files\Microsoft SQL Server\
INSTANCEID: MSSQLSERVER
INSTANCENAME: MSSQLSERVER
ISSVCACCOUNT: NT Service\MsDtsServer110
ISSVCPASSWORD: <empty>
ISSVCSTARTUPTYPE: Automatic
MATRIXCMBRICKCOMMPORT: 0
MATRIXCMSERVERNAME: <empty>
MATRIXNAME: <empty>
NPENABLED: 0
PID: *****
QUIET: false
QUIETSIMPLE: false
ROLE: <empty>
RSINSTALLMODE: FilesOnlyMode
RSSHPINSTALLMODE: SharePointFilesOnlyMode
RSSVCACCOUNT: NT Service\ReportServer
RSSVCPASSWORD: <empty>
RSSVCSTARTUPTYPE: Automatic
SAPWD: *****
SECURITYMODE: SQL
SQLBACKUPDIR: <empty>
SQLCOLLATION: Latin1_General_CI_AS
SQLSVCACCOUNT: NT Service\MSSQLSERVER
SQLSVCPASSWORD: <empty>
SQLSVCSTARTUPTYPE: Automatic
SQLSYSADMINACCOUNTS: RASHA-VAIO\RASHA
SQLTEMPDBDIR: <empty>
SQLTEMPDBLOGDIR: <empty>
SQLUSERDBDIR: <empty>
SQLUSERDBLOGDIR: <empty>
SQMREPORTING: false
TCPENABLED: 1
UIMODE: Normal
UpdateEnabled: true
UpdateSource: MU
X86: false
Configuration file: C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log\20150406_112342\ConfigurationFile.ini
Detailed results:
Feature: Management Tools - Complete
Status: Passed
Feature: Client Tools Connectivity
Status: Passed
Feature: Client Tools SDK
Status: Passed
Feature: Client Tools Backwards Compatibility
Status: Passed
Feature: Management Tools - Basic
Status: Passed
Feature: SQL Server Data Tools
Status: Passed
Feature: Database Engine Services
Status: Failed: see logs for details
Reason for failure: An error occurred during the setup process of the feature.
Next Step: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Component name: SQL Server Database Engine Services Instance Features
Component error code: 0x80004005
Error description: The service did not respond to the start or control request in a timely fashion.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.3128.0&EvtType=0xDC112D1C%400xDC80C325&EvtType=0xDC112D1C%400xDC80C325
Feature: Data Quality Services
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Component name: SQL Server Database Engine Services Instance Features
Component error code: 0x80004005
Error description: The service did not respond to the start or control request in a timely fashion.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.3128.0&EvtType=0xDC112D1C%400xDC80C325&EvtType=0xDC112D1C%400xDC80C325
Feature: Full-Text and Semantic Extractions for Search
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Component name: SQL Server Database Engine Services Instance Features
Component error code: 0x80004005
Error description: The service did not respond to the start or control request in a timely fashion.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.3128.0&EvtType=0xDC112D1C%400xDC80C325&EvtType=0xDC112D1C%400xDC80C325
Feature: SQL Server Replication
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Component name: SQL Server Database Engine Services Instance Features
Component error code: 0x80004005
Error description: The service did not respond to the start or control request in a timely fashion.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.3128.0&EvtType=0xDC112D1C%400xDC80C325&EvtType=0xDC112D1C%400xDC80C325
Feature: Master Data Services
Status: Passed
Feature: Distributed Replay Client
Status: Passed
Feature: Distributed Replay Controller
Status: Passed
Feature: Integration Services
Status: Failed: see logs for details
Reason for failure: An error occurred during the setup process of the feature.
Next Step: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Component name: SQL Server Integration Services
Component error code: 0x84BB0001
Error description: The service did not respond to the start or control request in a timely fashion.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.3128.0&EvtType=0xDC112D1C%400xDC80C325&EvtType=0xDC112D1C%400xDC80C325
Feature: Data Quality Client
Status: Passed
Feature: Reporting Services - Native
Status: Failed: see logs for details
Reason for failure: An error occurred during the setup process of the feature.
Next Step: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Component name: SQL Server Reporting Services
Component error code: 0x84BB0001
Error description: The service did not respond to the start or control request in a timely fashion.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.3128.0&EvtType=0xDC112D1C%400xDC80C325&EvtType=0xDC112D1C%400xDC80C325
Feature: Analysis Services
Status: Failed: see logs for details
Reason for failure: An error occurred during the setup process of the feature.
Next Step: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Component name: SQL Server Analysis Services
Component error code: 0x80131600
Error description: The service could not be started. Reason: The service did not respond to the start or control request in a timely fashion.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.3128.0&EvtType=0x88A466B0%400x857354B0&EvtType=0x88A466B0%400x857354B0
Feature: Reporting Services - SharePoint
Status: Passed
Feature: Reporting Services Add-in for SharePoint Products
Status: Passed
Feature: SQL Browser
Status: Passed
Feature: Documentation Components
Status: Passed
Feature: SQL Writer
Status: Passed
Feature: SQL Client Connectivity
Status: Passed
Feature: SQL Client Connectivity SDK
Status: Passed
Rules with failures:
Global rules:
Scenario specific rules:
Rules report file: C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log\20150406_112342\SystemConfigurationCheck_Report.htm
I hope it will help you to figure out ...i dont know how to solve this issue ..i have un install and re install more than 5 times.
thank you -
Unable to install SQL Server 2012 Standard: Error code 0x851A0019
Hi All,
I am trying to install sql server 2012 standard edition on windows server 2008R2 but at the end of the installation it is giving me the following error message:
"The following error has occurred:
Wait on the Database Engine recovery handle failed. Check the SQL Server error log for potential causes."
And in the log file I got the following error message:
Feature: Database Engine Services
Status: Failed: see logs for details
Reason for failure: An error occurred during the setup process of the feature.
Next Step: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Component name: SQL Server Database Engine Services Instance Features
Component error code: 0x851A0019
Error description: Wait on the Database Engine recovery handle failed. Check the SQL Server error log for potential causes.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.2100.60&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4025&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4025
(I have posted part of the log file)
Need your help to resolve this issue.
Thanks,
MKNayeemHi,
Thanks for your reply.
I have already followed that article. I have changed the user to local account user, but it did not work.
Like you said the sql server is installed, but it is not starting the services. Following is the error log file message:
2015-03-16 10:12:15.27 Server Microsoft SQL Server 2012 - 11.0.2100.60 (X64)
Feb 10 2012 19:39:15
Copyright (c) Microsoft Corporation
Standard Edition (64-bit) on Windows NT 6.1 <X64> (Build 7601: Service Pack 1) (Hypervisor)
2015-03-16 10:12:15.27 Server (c) Microsoft Corporation.
2015-03-16 10:12:15.27 Server All rights reserved.
2015-03-16 10:12:15.29 Server Server process ID is 5724.
2015-03-16 10:12:15.29 Server System Manufacturer: 'VMware, Inc.', System Model: 'VMware Virtual Platform'.
2015-03-16 10:12:15.29 Server Authentication mode is MIXED.
2015-03-16 10:12:15.29 Server Logging SQL Server messages in file 'C:\Program Files\Microsoft SQL Server\MSSQL11.BNG1SECISO\MSSQL\Log\ERRORLOG'.
2015-03-16 10:12:15.29 Server The service account is 'NT Service\MSSQL$BNG1SECISO'. This is an informational message; no user action is required.
2015-03-16 10:12:15.29 Server Registry startup parameters:
-d C:\Program Files\Microsoft SQL Server\MSSQL11.BNG1SECISO\MSSQL\DATA\master.mdf
-e C:\Program Files\Microsoft SQL Server\MSSQL11.BNG1SECISO\MSSQL\Log\ERRORLOG
-l C:\Program Files\Microsoft SQL Server\MSSQL11.BNG1SECISO\MSSQL\DATA\mastlog.ldf
2015-03-16 10:12:15.29 Server Command Line Startup Parameters:
-s "BNG1SECISO"
2015-03-16 10:12:15.57 Server SQL Server detected 2 sockets with 1 cores per socket and 1 logical processors per socket, 2 total logical processors; using 2 logical processors based on SQL Server licensing. This is an informational message;
no user action is required.
2015-03-16 10:12:15.57 Server SQL Server is starting at normal priority base (=7). This is an informational message only. No user action is required.
2015-03-16 10:12:15.57 Server Detected 16383 MB of RAM. This is an informational message; no user action is required.
2015-03-16 10:12:15.57 Server Using conventional memory in the memory manager.
2015-03-16 10:12:15.67 Server This instance of SQL Server last reported using a process ID of 2452 at 16-03-2015 07:03:13 (local) 16-03-2015 01:33:13 (UTC). This is an informational message only; no user action is required.
2015-03-16 10:12:15.67 Server Node configuration: node 0: CPU mask: 0x0000000000000003:0 Active CPU mask: 0x0000000000000003:0. This message provides a description of the NUMA configuration for this computer. This is an informational
message only. No user action is required.
2015-03-16 10:12:15.69 Server Using dynamic lock allocation. Initial allocation of 2500 Lock blocks and 5000 Lock Owner blocks per node. This is an informational message only. No user action is required.
2015-03-16 10:12:15.69 Server Software Usage Metrics is disabled.
2015-03-16 10:12:15.70 spid6s Starting up database 'master'.
2015-03-16 10:12:15.78 Server CLR version v4.0.30319 loaded.
2015-03-16 10:12:15.82 Server Common language runtime (CLR) functionality initialized using CLR version v4.0.30319 from C:\Windows\Microsoft.NET\Framework64\v4.0.30319\.
2015-03-16 10:12:17.36 spid6s Error: 824, Severity: 24, State: 2.
2015-03-16 10:12:17.36 spid6s SQL Server detected a logical consistency-based I/O error: incorrect pageid (expected 1:377; actual 261:2228225). It occurred during a read of page (1:377) in database ID 1 at offset 0x000000002f2000 in
file 'C:\Program Files\Microsoft SQL Server\MSSQL11.BNG1SECISO\MSSQL\DATA\master.mdf'. Additional messages in the SQL Server error log or system event log may provide more detail. This is a severe error condition that threatens database integrity and
must be corrected immediately. Complete a full database consistency check (DBCC CHECKDB). This error can be caused by many factors; for more information, see SQL Server Books Online.
Thanks
MKNayeem -
SQL Server 2012 Installation Issue
Hi
Not sure if this is the correct forum for this but I'll post anyway.
Ialready have sql 2005 and 2008r2 installed on my local machine running windows 7, 64 bit.
I recently tried to install sql 2012 but ran into a problem that I'm stumped by. The installation runs fine, no errors or issues. When I start 2012 the SS Management studio window appears but the usual splash screen in the middle of the window asking to
to connect to a server does not. If I try hitting any of the meny items at the top of the screen the SSMS window just hangs.
I have service pack 1 installed also. I uninstalled and tried again but still no luck. my SQL 2005 and 2008r2 version are still fine and run as normal. I also tried installing sql 2014 to see if that would work but I had the same issue as with 2012.
Any ideas anyone?
thanks in advance
Hi,
Both SQL Server 2012 and SQL Server 2014 require .NET Framework 4.0 which does not required by the previous versions.
Make sure that . NET Framework 4.0 has been successfully installed on your system before you install SQL Server
Hardware and Software Requirements for Installing SQL Server 2014
http://msdn.microsoft.com/en-us/library/ms143506.aspx
Thanks.
Tracy Cai
TechNet Community Support -
SQL Server 2012 Install Errors on Server 2012
I am getting an error when installed a new copy of Microsoft SQL Server 2012 Service Pack 1 on a newly created Server 2012 that has all its updates. About 90% of the way through the installation this is the error I received below:
TITLE: Microsoft SQL Server 2012 Service Pack 1 Setup
The following error has occurred:
Attempted to perform an unauthorized operation.
Click 'Retry' to retry the failed action, or click 'Cancel' to cancel this action and continue setup.
For help, click: http://go.microsoft.com/fwlink?LinkID=20476&ProdName=Microsoft%20SQL%20Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.3128.0&EvtType=0xDC112D1C%25400xBB814387
Second Error when continuing:
TITLE: Microsoft SQL Server 2012 Service Pack 1 Setup
The following error has occurred:
A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server)
Click 'Retry' to retry the failed action, or click 'Cancel' to cancel this action and continue setup.
For help, click: http://go.microsoft.com/fwlink?LinkID=20476&ProdName=Microsoft%20SQL%20Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.3128.0&EvtType=0xBA6E21AA%25400x9A41B222
I clicked cancel on both errors but I don't know if this will impact my application. After the installation completes I can see everything passed except the Database Engine. Any thoughts on this issue?Hello,
If this is a VMware machine, please read the following article:
http://support.microsoft.com/kb/2799534
If the above is not the case please share the Detail.txt log file with us. The following article may help you locate the file on disk:
http://msdn.microsoft.com/en-us/library/ms143702(v=sql.110).aspx
Hope this helps.
Regards,
Alberto Morillo
SQLCoffee.com -
Sql Server 2012 Uninstalling Error:
Hi All,
I have tried to uninstall SQL Server Express 2012 from my lap, during the uninstallation process i am getting the following error:
"An installation package for the product Microsoft SQL Server 2008 Setup Support Files cannot be found. Try the installation again using a valid copy of the installation package 'sqlsupport.msi'.
What is the reason behind this error?What can i do now?Shall i continue the uninstallation process or stop it,while getting this message?Please help me to solve this error.
Thanks and Regards,
T.TharaneetharanHello,
This issue may be related to some missing MSI cache files. The following article may help you restoring them.
http://support.microsoft.com/kb/969052
First I want you to try uninstalling SQL Server setup support files using Control Panel, the follow instructions on the following article:
http://msdn.microsoft.com/en-us/library/ms143412(v=sql.110).aspx
If all the above is not successful, try to manually uninstall it using the following procedure:
1. Uninstall all SQL Server 2012 components you can using Control Panel -> Programs and Features
2. Backup the registry.
3. Delete the following keys in regedit:
--HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Microsoft SQL Server
--HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\MSSQLServer
4. Go to HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall and delete all the sub-keys referencing
SQL Server.
5. Go to HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services and delete all the keys referencing SQL Server.
6. Rename all the SQL Server folders in the computer like C:\Program Files\Microsoft SQL Server and subfolders.
Hope this helps.
Regards,
Alberto Morillo
SQLCoffee.com -
SQL Server 2012 Install Error 17182
I am trying to install SQLSERVER 2012 SP1 (cuz my VisioStudios told me to) but the SQLEngine and Replication failed. Looking into the log I get the following:
2014-03-20 15:04:42.61 spid5s Starting up database 'msdb'.
2014-03-20 15:04:42.61 spid11s Unable to initialize SSL encryption because a valid certificate could not be found, and it is not possible to create a self-signed certificate.
2014-03-20 15:04:42.62 spid11s Error: 17182, Severity: 16, State: 1.
2014-03-20 15:04:42.62 spid11s TDSSNIClient initialization failed with error 0x80092004, status code 0x80. Reason: Unable to initialize SSL support. Cannot find object or property.
2014-03-20 15:04:42.62 spid11s Error: 17182, Severity: 16, State: 1.
2014-03-20 15:04:42.62 spid11s TDSSNIClient initialization failed with error 0x80092004, status code 0x1. Reason: Initialization failed with an infrastructure error. Check for previous errors. Cannot find object or property.
2014-03-20 15:04:42.62 spid11s
Error: 17826, Severity: 18, State: 3.
Apparently there is something wrong with my certificate? If I run certutil -store - user I don't see any problems there
So what do I do now?
Should I just delete everything as suggested in thread "SQL Server 2012 Install Failure 17190, Severity:16, State:1"
Thank You to anyone who can give me a hand!Hi ,
According to your description, as other post, this error may be occurred due to a corrupt user profile for the account running SQL Services. You can try change the service account to a local (built-in) account which have permission to read the private key
of the SSL certificate. In addition, according to your error message, we need to examine the certificates that have been generated launching mmc.exe, for more information, see:
http://www.sqldbadiaries.com/2013/01/01/service-does-not-start-tdssniclient-initialization-failed-with-error-0x80092004-status-code-0x80/
http://social.msdn.microsoft.com/Forums/sqlserver/en-US/8f27fbb3-1566-408a-bfde-abdde17fb424/ssl-sql-server-permission?forum=sqlsecurity
Regards,
Sofiya Li
Sofiya Li
TechNet Community Support -
SQL Server 2012 Express error 9002 while restoring a backup from 2008
Hi all,
I have installed SQL Server 2012 Express on my laptop operating with win 8. Then I took the backup in my old laptop with SQL Server 2008R Express / Windows 7 and tried to restore it to the new one.
After it restored it produced an error messaging saying that restore failed. The error code was 9002 and it says due to NOTHING. I checked the log file it is a file of 1024 kb size, not big. When I installed the SQL 2012 I disabled the autogrowth of the
log file (exactly same setting as I had with 2008) The log is not big. I tried to further shrink, no change.
Moreover the db is already there with full records, I can manipulate it. Even take a back w/o problems. What is this issue? Is it resolved?
thanksan error messaging saying that restore failed. The error code was 9002
and it says due to NOTHING. I
select *
from sys.messages
where message_id = 9002
=> "The transaction log for database '%ls' is full due to '%ls'. "
Is your disk may low on free space?
Olaf Helper
[ Blog] [ Xing] [ MVP] -
When I use framing in SQL Server 2012 express, error occurred
Hello, everyone,
I met a error when I use framing in the SQL Server 2012 Express. Could you help me, thank you!
the query is:
SELECT custid, orderid, orderdate, val,
SUM(val) OVER(PARTITION BY custid
ORDER BY orderdate, orderid
ROWS BETWEEN UNBOUNDED PRECEDING
AND CURRENT ROW) AS runningtotal
FROM Sales.OrderValues;
And the error information is:
Msg 102, Level 15, State 1, Line 4
Incorrect syntax near 'ROWS'.
Thank you!Hello,
If you run that statement on SQL Server 2012 (or later), you won’t receive any errors.
I receive that error message only when I run that statement on SQL Server 2008.
I didn't try with SQL Server 2012 Express though. I tested with a SQL Server 2012 Standard Edition instance with SP1 CU2, and your statement works.
Hope this helps.
Regards,
Alberto Morillo
SQLCoffee.com -
SQL SERVER 2012 Instnace Error Windows 8
I am trying to install SQL server 2012. It keeps giving me the Instance error over and over again. I have been trying for a week now and nothing is working. I do have WinRAR. Please Help. Plus I have downloaded the Visual Studio 2010 Shell based on the requirement
for this download. STill no use.Hi,
As previous comments, check the relevant entries in the detail and summary log.
You can post a screenshot of the issue. So we can understand the problem in more details.
Before we get more information, you can check the following:
1. Create a new user account and use it to install the SQL Server 2012.
2. Turn off the firewall temporarily and see how the blow article helps:
http://blogs.msdn.com/b/sql_protocols/archive/2007/05/13/sql-network-interfaces-error-26-error-locating-server-instance-specified.aspx
Thanks.
Tracy Cai
TechNet Community Support -
Automated SQL Server 2012 Installation
I want to be able to install SQL Server during an automated server build while NOT logged into the machine. I have it installing SQL Server 2012 using a config file and setting the sa password. The installation completes but does not use the configuration
file.
Can SQL Server 2012 be installed this way?Yes you can automate, please check the below links and you have to modify the configuration file as per your server details....
https://msdn.microsoft.com/en-us/library/dd239405%28v=sql.105%29.aspx
https://msdn.microsoft.com/en-us/library/ms144259.aspx
https://social.msdn.microsoft.com/Forums/en-US/9e7933a2-d43f-40b6-ae9f-ab7c8bdf06de/automate-sql-install-question?forum=sqlsetupandupgrade
Raju Rasagounder Sr MSSQL DBA -
How scaling a SQL Server 2012 installation
Hi,
I need to know if it is possible to scale SQL Server 2012 by using more database servers in load balancing.
Many thanksHello,
My suggestion is to use AlwaysOn over any other method. I have not seen a load balancing hardware used for balancing SQL
Server yet, so I cannot share with you any useful experience. However, I found the following third-party solution.
http://blogs.citrix.com/2011/03/29/load-balancing-sql-2/
Try to avoid using Peer-to-Peer replication due to possible high latency, unless you use one of the instances to query data (SELECT) and the other to update data (INSERT/DELETE/UPDATE).
Sorry for my late response. It was a very busy day from the very first hours of the day.
L
Hope this helps.
Regards,
Alberto Morillo
SQLCoffee.com
Maybe you are looking for
-
When I get a phone call or text message it will not make the sound. Just vibrate. But the switch is on normal. When I change it to vibrate the volume thing will not show. Nor will my up volume up key work. Is there any way to fix it?
-
How to validate the field when i am populating the data cursor to block
Hi, I am populating data cursor to multi record block. Block contain 5 items. I am populating data cursor to block for 4 items. User will enter one item value that is quantity field. If user enter negative values and decimal points in quantity filed
-
Syntax_error dump in program FP_TEST_00
Hi I am getting a runtime error in a standard program FP_Test_00. Can anyone please explain me how could i rectify the error since the program is standard sap. Thanks in advance. Please refee to the dump screenshot for the same.
-
How can I upgrade from CS4 to CS5/CS6?
Hi, I really need to upgrade my Adobe suite from CS4 to CS5 or higher. From reading in this forum you are unable to do it, but those posts were from 2012. Wondering if this is still current and if anyone can help me? Do I need to buy the entire suite
-
HP Support Assistant not installing updates
I downloaded my updates via the Support Assistant but when i see the history it shows that it is not yet completed installing. Many times I have postponed the restart by the Support Assistant. Here is how it shows me. Please Help Me out. Viraj dv7-61