SQL Server 6.5 ODBC Error
I have a problem with a DB call. I have two sql delete statements embedded
in Forte Begin End Transaction block. The second statement fails with the
ODBC error. The first Delete causes a DB level Trigger to happen that also
has a Transaction with a Insert into another table. The triggered insert
also has a Transaction and insert. Any Ideas?
I am getting the following error:
ODBC SQLExecute failed.
[Microsoft][ODBC SQL Server Driver]Connection is busy with results for
another hstmt
Eric Rasmussen
Online Resources &
Communications Corporation
(703) 394-5128
[email protected]
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>
Hi Eric,
This seems to do the trick. My DBA had suggested that I use that to >help
with performance. Any explanation as to why this causes the error?
Thanks!
I am not too sure, probably, the version!! I am running 2.65 (ODBC Driver
for SQL Server) and I faced with similar problem sometime back.
Regards,
V Muthuramalingam (Muthu)
Catapult Technology, Inc.
[email protected]
[email protected]
http://www.catapultt.com
-----Original Message-----
From: Muthuramalingam Venkataraman [SMTP:[email protected]]
Sent: Thursday, June 17, 1999 4:52 PM
To: [email protected]
Cc: [email protected]
Subject: Re: SQL Server 6.5 ODBC Error
You might probably want to uncheck the Generate Stored Procedure for
Prepared Statement in your ODBC configuration setting!
Hope this helps
V Muthuramalingam (Muthu)
Catapult Technology, Inc.
[email protected]
[email protected]
http://www.catapultt.com
Eric wrote :
I have a problem with a DB call. I have two sql delete statementsembedded
in Forte Begin End Transaction block. The second statement fails withthe
ODBC error. The first Delete causes a DB level Trigger to happen thatalso
has a Transaction with a Insert into another table. The triggered
insert
also has a Transaction and insert. Any Ideas?
I am getting the following error:
ODBC SQLExecute failed.
[Microsoft][ODBC SQL Server Driver]Connection is busy with results for
another hstmt
Get Your Private, Free Email at http://www.hotmail.com
Get Your Private, Free Email at http://www.hotmail.com
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>
Similar Messages
-
Hi,
I keep receiving the error below in the SQL Server Agent Error Log;
[165] ODBC Error: 0, Named Pipes Provider: Could not open a connection to SQL Server [2]. [SQLSTATE 08001]
It is occurring approximately 20 times an hour and i cannot link it to any job failures. All jobs on the same SQL instance are working.
The server is a clustered server and there are no errors occuring in the SQL Server error log at the same time. I have attempted to trace using profiler looking for errors and warnings but anything that does occur doesn't seem to correspond to the reported
times of the errors within the sql agent error log.
Please could someone point me where to look next?
Many thanks.Please may I add that this is on a SQL Server 2008 R2 Enterprise edition patched to 10.50.1600.
Nah, that server is not patched at all, because 10.50.1600 is the RTM version. Find Service Pack 2 and install at the next maintenance window, after having performed tests according to your local policy.
It is not going to resolve your particular problem though.
It seems like you have a job that attempts to a connect to s server that is down or non-existing. The job may be configured to return success also on failures. I would check if there are jobs that target other servers.
Erland Sommarskog, SQL Server MVP, [email protected] -
Is it possible to use Jdeveloper with Other Sql Server using JDBC-ODBC bri
I have been able to successfully establish connection with Sql server Using JDBC-ODBC bridge, but when i run the application and perform some operations such as insert the following errors occur:
(oracle.jbo.SQLStmtException) JBO-27122: SQL error during statement preparation. Statement: SELECT ItmUnit.ORG_CODE, ItmUnit.UNIT_CODE, ItmUnit.UNIT_NAME, ItmUnit.ADDRESS1, ItmUnit.ADDRESS2, ItmUnit.ADDRESS3, ItmUnit.CITY_CODE, ItmUnit.USER_ID, ItmUnit.TIME_STAMP FROM ITM_UNIT ItmUnit
----- LEVEL 1: DETAIL 0 -----
(java.sql.SQLException) [DataDirect][ODBC Sybase Wire Protocol driver]Sybase does not allow more than one active statement when retrieving results without a cursor
(oracle.jbo.DMLException) JBO-26041: Failed to post data to database during "Insert": SQL Statement "INSERT INTO IMMS.HRM_UNIT(UNIT_CODE,UNIT_NAME) VALUES (?,?)".
----- LEVEL 1: DETAIL 0 -----
(java.sql.SQLException) [Microsoft][ODBC SQL Server Driver]Connection is busy with results for another hstmt
(oracle.jbo.AttrValException) JBO-27014: Attribute DeptCode in HrmUnitDept is required
(oracle.jbo.SQLStmtException) JBO-27122: SQL error during statement preparation. Statement: SELECT HrmUnit.UNIT_CODE, HrmUnit.UNIT_NAME FROM IMMS.HRM_UNIT HrmUnit
----- LEVEL 1: DETAIL 0 -----
(java.sql.SQLException) [Microsoft][ODBC SQL Server Driver]Connection is busy with results for another hstmtYes, you can do that. For testing purposes you can also create simple files (with mkfile) and add these to ASM. That way you could also experiment with deleting files and see what happens in ASM
Bjoern -
Unix: SQL Server Connection with ODBC (CRsqls24.so)
Hi,
I almost find no information how to set up a SQL Server connection using ODBC on a unix platform.
This is what I get when I try to refresh my crystal report on my BO Server (4.1):
"The viewer could not process an event. Error in file XXX.rpt:
Error loading database information"
.) is the port number really separated from the server by comma? (http://help.sap.com/businessobject/product_guides/boexir4/en/xi4sp10_data_acs_en.pdf)
.) where is the right place to speficy the SQL Server isntance name (SQLInstanceA in this case)? I didn't find any information about that?
[MYDB]
Driver=/opt/BOBJ/xir4/sap_bobj/enterprise_xi40/aix_rs6000/odbc/lib/CRsqls24.so
(for 64bit: Driver=/opt/BOBJ/xir4/sap_bobj/enterprise_xi40/aix_rs6000_64/odbc/lib/CRsqls24.so)
Description=MYDB
HostName=100.10.10.10,1433\SQLInstanceA
Database=MYDB
QuotedId=Yes
AnsiNPW=No
LogonID=ABC
Password=abc123
Thanks!First off, let me say that in the past (pre v9) when I've tried to use Windows logins with datasources, it never worked. But that doesn't mean that they finally got it working, just that I stopped trying.
What I was referring to in my post is that once you have CF installed, you need to go to the Windows Services screen, open each of the CF processes, click on the LOGIN tab, and change it from the default services login to be whatever WIndows login you have setup in Active Directory. Then restart CF so that it's process is now running under that login with its credentials. Then go to SQL Admin and setup that same login and give it access to the database you want to access. Then go to CF Datasource menu and setup the datasource as you did previously. If CF's support of Windows authentication for datasources does in fact now work, you should be in business.
If it doesn't work, then you'll need to do as I said earlier, and setup SQL logins for the CF servers to use, and then in the CF Datasource setup screens you would specify that login info in the same way that you would have given it the "sa" login info.
-reed -
SQL Server 2008 R2 { An Error occured when attaching database(s) }
Hello Guys!
I just installed SQL Server 2008 R2 a couple of days ago, on the first day use i can attach database(.mdf) with out any problem.
on the day 2, i keep getting this error:
http://img515.imageshack.us/img515/14/1212i.png
TITLE: Microsoft SQL Server Management Studio
An error occurred when attaching the database(s). Click the hyperlink in the Message column for details.
BUTTONS:
OK
after clicking the Hyperlink this window open:
http://img34.imageshack.us/img34/8766/hyperg.png
TITLE: Microsoft SQL Server Management Studio
Attach database failed for Server 'STARGAZER-PC\SQLSTARMAX'. (Microsoft.SqlServer.Smo)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&ProdVer=10.50.1600.1+((KJ_RTM).100402-1539+)&EvtSrc=Microsoft.SqlServer.Management.Smo.ExceptionTemplates.FailedOperationExceptionText&EvtID=Attach+database+Server&LinkId=20476
ADDITIONAL INFORMATION:
An exception occurred while executing a Transact-SQL statement or batch. (Microsoft.SqlServer.ConnectionInfo)
Unable to open the physical file "E:\New folder\DataBase.MDF". Operating system error 5: "5(Access is denied.)". (Microsoft SQL Server, Error: 5120)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&ProdVer=10.50.1600&EvtSrc=MSSQLServer&EvtID=5120&LinkId=20476
BUTTONS:
OK
in that day i reinstall SQL Server 2008 R2, because I'm so confused. after that i try to attach i still got the same error, what i did is i share the folder where the database is.
i open SSMS and try to attach and i attached without any error...
i think this is the 4rth day, untill now everytime i want to attach a database i got this error, and even i try to share the folder where the database is i still got that error.
any advice guys?
Thanks a lot
jhules
if you want to be happy, find something you love to do and do it for free, then find someone to to you for it.The Error clearly shows that MDF files and LDF files are not matching or LDF file is corrupted.
You can follow either of the one option below
1. Restore a recent backup rather attaching the MDF file
2. Attach single MDF file without LOG File( Warning: All the log transactions will be gone and new log file will be created)
EXEC sp_attach_single_file_db @dbname = 'AdventureWorks2008R2',
@physname = N'C:\Program Files\Microsoft SQL Server\MSSQL10_50.MSSQLSERVER\MSSQL\Data\AdventureWorks2008R2_Data.mdf';
Thanks, Aditya Badramraju, _______________________________________________________ Please mark answered if your question is completely answered; vote it as helpful to help others find a solution quicker. This posting is provided AS IS with no warranties
and confers no rights. _______________________________________________________ -
Hi All,
I have started receiving this error in the logs for the last 10 days and the Schedules Jobs for the database have stopped running. My MS CRM application is working fine.
Can anyone guide me what could be the problem.
Date 17/4/2014 2:04:20 PM
Log SQL Server Agent (Current - 17/4/2014 2:01:00 PM)
Message
[298] SQLServer Error: 10061,
A network-related or instance-specific error has occurred while establishing a connection to SQL Server. Server is not found or not accessible. Check if instance name is correct
and if SQL Server is configured to allow remote connections. For more information see SQL Server Books Online. [SQLSTATE 08001]
Date 17/4/2014 2:11:55 PM
Log SQL Server Agent (Current - 17/4/2014 2:01:00 PM)
Message
[298] SQLServer Error: 10061,
A network-related or instance-specific error
has occurred while establishing a connection to SQL Server. Server is not found or not accessible. Check if instance name is correct and if SQL Server is configured to allow remote connections. For more information
see SQL Server Books Online. [SQLSTATE 08001]
Date 7/4/2014 11:00:31 AM
Log SQL Server Agent (Current - 17/4/2014 2:01:00 PM)
Message
[298] SQLServer Error: 10061,
A network-related or instance-specific error
has occurred while establishing a connection to SQL Server. Server is not found or not accessible. Check if instance name is correct and if SQL Server is configured to allow remote connections. For more information
see SQL Server Books Online. [SQLSTATE 08001]Check this link
http://social.msdn.microsoft.com/Forums/en-US/906da9b5-2482-468c-a424-ae099da2d96b/sql-server-agent-service-account-error?forum=sqlsetupandupgrade
Regards, RSingh -
Failed to set security on SQL Server registry key. Error: 2
Hi,
I have a Primary site (mixed mode) running SCCM 2007 SP1 for many months now with no issues.
This site is made up of two Win 2008 sp2 servers sharing the SCCM roles:-
SCCM01 - Site server, DP, RP, PXE and SQL2005 hosting the SCCM database
SCCM02 – SUP, MP, FSP, SLP
The SQL2005 on SCCM01 is running under a domain service account called
domain\service_sccm which is also a sysadmin in SQL as is the SCCM02 server.
In an effort to resolve the isse I have made this account a Domain Admin.
I have also used this account to log onto SEC01 to run the Secondary Site installation and to be the SQL Service account.
I'm now trying to add a Secondary Site on a Domain Controller called SEC01 (also Win2008 sp2) and on the same LAN as the SCCM01/02.
This is where I get problems.
I run the installation locally on the Sec Site server (DC) as a Domain Admin and the installation completes OK (all green ticks),
the ComponentSetup.log and Pre-Reqs are all good as well however when I check the ConfigMgrSetup.log I see the below -
Failed to set security on SQL Server registry key. Error: 2.
<11-09-2010 22:46:59> SMS Setup full version is 4.00.6221.1000
<11-09-2010 22:46:59> Successfully set security on Setup registry key.
<11-09-2010 22:46:59> Failed to set security on SQL Server registry key. Error: 2
<11-09-2010 22:46:59> Successfully set security on Identification registry key.
<11-09-2010 22:46:59> Creating SMS Inbox Source registry key ...
<11-09-2010 22:46:59> Installing SMS Site Component Manager ...
<11-09-2010 22:46:59> Installing Site Component Manager under acct <NT AUTHORITY\SYSTEM> path <C:\Program Files (x86)\Microsoft
Configuration Manager\bin\i386\sitecomp.exe>
<11-09-2010 22:47:01> Started Site Component Manager service
<11-09-2010 22:47:01> SMS Site Component Manager installation completed.
<11-09-2010 22:47:01> Done with service installation
Adding the PMP role to SEC01 also fails to install and no MPSetup or MPControl logs are created.
WebDav and win2008 roles, features all added and server fully patched.
Despooler.log on SCCM01 seems good and passing keys.
Tried installing to default path and to shortened path such as C:\SCCM
The new secondary site is listed in the console and an address can be added for the Secondary Site
BITS Server Extensions and Remote Differential Compression Features are enabled.
The Group memberships all appear ok:-
SCCM01
Local Admins
contains the sec site server SEC01, SCCM01, installation accounts
SMS_SiteToSiteConnection_001
SEC01 (the sec site server)
SMS_SiteSystemToSiteServerConnection_001
SCCM02
SEC01
No Local Admins as a DC
SMS_SiteToSiteConnection_002
SCCM01
SMS_SiteSystemToSiteServerConnection_002
empty
SQL 2005
This has the account logged in during installation as a sysadmin
SCCM02 is also sysadmin
The fundamental issue appears to be that the SEC01$ server account is not being added to SQL Logins (and therefore SCCM database Roles)
therefore the installation cannot complete.
I have tried to manually add the SEC01 account to SQL Logins before installation of Sec Site but this did not work.
Not sure if the fact that SEC01 is a DC may be a factor.
Appreciate any help if anyone has seen this before or can suggest a resolution.
ThanksAfter a lot of digging around and head scratching I eventually found the resolution.
The original thread title Error turned out to be a bit of a red herring in that my failure to deploy Sec Sites came down to two separate issues seemingly unrelated to the error message of the thread title.
The first part of the resolution was to manually create the SQL Server accounts for the Sec Site Servers and assign them to the smsdbrole_MP DB role to
let the SQL side of the SCCM install complete a s these were not being created automatically.
This then left the fact that that the installation of the Sec Site completed successfully according to the install logs in C:\ however the DP and MP would
never install.
The big clue was eventually contained in the mpfdm.log errors relating to
**ERROR: Cannot find path for destination inbox SMS_AMT_PROXY_COMPONENT on server REGISTRY SMS_MP_FILE_DISPATCH_MANAGER
and
**ERROR: Cannot find path for destination inbox Asset Intelligence KB Manager on server REGISTRY SMS_MP_FILE_DISPATCH_MANAGER
Thankfully the errors led me to these two blogs:
http://myitforum.com/cs2/blogs/scassells/archive/2009/07/20/error-cannot-find-path-for-destination-inbox-sms-amt-proxy-component-on-server-registry.aspx
and
http://social.technet.microsoft.com/Forums/en-US/configmgrsetup/thread/5fcc53d4-8629-4b34-9eaa-6cb020eedc13/
As it turned out the SCCM installation registry and folder creation does not complete and I had to manually enter the reg settings as detailed in the
links above to complete the installation. Once I did as described everything worked a treat – all my MPs and DPs are 100% now.
Solutions
Add the following reg keys to each of your effected secondary sites.
Inbox Fix
Windows Registry Editor Version 5.00
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\SMS\MPFDM\Inboxes]
"Asset Intelligence KB Manager"="E:\\Program Files\\Microsoft Configuration Manager\\inboxes\\AIKbMgr.box"
"SMS_AMT_PROXY_COMPONENT"="E:\\Program Files\\Microsoft Configuration Manager\\inboxes\\amtproxy.box"
Asset Intelligence fix:
Note: you will need to identify the next largest key value.
In my example it was key 49
Windows Registry Editor Version 5.00
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\SMS\Inbox Source\Inbox Definitions\49]
"Inbox Name"="Asset Intelligence KB Manager"
"Relative Path"="inboxes\\AIKbMgr.box"
"NAL Path"=""
"User Rights"=dword:00000000
"Service Rights"=dword:00000004
"Monitoring Enabled"=dword:00000001
"Location Type"=dword:00000001
"Guest Rights"=dword:00000001
AMT registry Fix.
Note: you will need to identify the next largest key value.
In my example it was key 50
Windows Registry Editor Version 5.00
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\SMS\Inbox Source\Inbox Definitions\50]
"Inbox Name"="SMS_AMT_PROXY_COMPONENT"
"Relative Path"="inboxes\\amtproxy.box"
"NAL Path"=""
"User Rights"=dword:00000000
"Service Rights"=dword:00000004
"Monitoring Enabled"=dword:00000001
"Location Type"=dword:00000001
"Guest Rights"=dword:00000001
Big thanks to Shaun Cassells and John Marcum for these blogs -
SQL Server 2012 installation problem (error server didn't respond in timely fashion ....)
Hi everyone,
I am new to SQL server....I am learning C# programming using visual studio 2013 . And I want to learn SQL database language to create and practice C# database project....My computer meets all the hardware requirement for SQL installation (i.e. My computer
has window 7 OS , 80 GB freen HD and 6 GB RAM. ) Therefore I download Microsoft SQL server express 2012 try to install it in my computer (which already has visual studio).
But during installation of SQL server I have problem ...it says
the server doesn't respond in timely fashion. When I research about it everyone were saying uninstall sql and reinstall again. I uninstall and re install but still having same problem...
The database engine also not installed displaying same error.
I don't know how can i install sql server 2012 to use with visual studio in same computer.
Can somebody please help with SQL installation please ?
It will be great help.
Many thanks in advance
regards
rashHi
my summary file is :
Overall summary:
Final result: Failed: see details below
Exit code (Decimal): -2146232832
Start time: 2015-04-06 11:34:18
End time: 2015-04-06 19:04:46
Requested action: Install
Setup completed with required actions for features.
Troubleshooting information for those features:
Next step for SQLEngine: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Next step for DQ: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Next step for FullText: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Next step for Replication: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Next step for IS: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Next step for RS: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Next step for AS: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Machine Properties:
Machine name: RASHA-VAIO
Machine processor count: 4
OS version: Windows 7
OS service pack: Service Pack 1
OS region: United States
OS language: English (United States)
OS architecture: x64
Process architecture: 64 Bit
OS clustered: No
Product features discovered:
Product Instance Instance ID Feature
Language Edition Version Clustered
SQL Server 2008 SQLEXPRESS MSSQL10.SQLEXPRESS Database Engine Services 1033
Express Edition 10.1.2531.0 No
SQL Server 2008 SQLEXPRESS MSSQL10.SQLEXPRESS SQL Server Replication 1033
Express Edition 10.1.2531.0 No
Package properties:
Description: Microsoft SQL Server 2012 Service Pack 1
ProductName: SQL Server 2012
Type: RTM
Version: 11
SPLevel: 0
Installation location: E:\x64\setup\
Installation edition: Enterprise
Product Update Status:
None discovered.
User Input Settings:
ACTION: Install
ADDCURRENTUSERASSQLADMIN: false
AGTSVCACCOUNT: NT Service\SQLSERVERAGENT
AGTSVCPASSWORD: *****
AGTSVCSTARTUPTYPE: Manual
ASBACKUPDIR: C:\Program Files\Microsoft SQL Server\MSAS11.MSSQLSERVER\OLAP\Backup
ASCOLLATION: Latin1_General_CI_AS
ASCONFIGDIR: C:\Program Files\Microsoft SQL Server\MSAS11.MSSQLSERVER\OLAP\Config
ASDATADIR: C:\Program Files\Microsoft SQL Server\MSAS11.MSSQLSERVER\OLAP\Data
ASLOGDIR: C:\Program Files\Microsoft SQL Server\MSAS11.MSSQLSERVER\OLAP\Log
ASPROVIDERMSOLAP: 1
ASSERVERMODE: TABULAR
ASSVCACCOUNT: NT Service\MSSQLServerOLAPService
ASSVCPASSWORD: <empty>
ASSVCSTARTUPTYPE: Automatic
ASSYSADMINACCOUNTS: RASHA-VAIO\RASHA
ASTEMPDIR: C:\Program Files\Microsoft SQL Server\MSAS11.MSSQLSERVER\OLAP\Temp
BROWSERSVCSTARTUPTYPE: Disabled
CLTCTLRNAME: MAIN
CLTRESULTDIR: C:\Program Files (x86)\Microsoft SQL Server\DReplayClient\ResultDir\
CLTSTARTUPTYPE: Manual
CLTSVCACCOUNT: NT Service\SQL Server Distributed Replay Client
CLTSVCPASSWORD: <empty>
CLTWORKINGDIR: C:\Program Files (x86)\Microsoft SQL Server\DReplayClient\WorkingDir\
COMMFABRICENCRYPTION: 0
COMMFABRICNETWORKLEVEL: 0
COMMFABRICPORT: 0
CONFIGURATIONFILE: C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log\20150406_112342\ConfigurationFile.ini
CTLRSTARTUPTYPE: Manual
CTLRSVCACCOUNT: NT Service\SQL Server Distributed Replay Controller
CTLRSVCPASSWORD: <empty>
CTLRUSERS: RASHA-VAIO\RASHA
ENABLERANU: false
ENU: true
ERRORREPORTING: false
FEATURES: SQLENGINE, REPLICATION, FULLTEXT, DQ, AS, RS, RS_SHP, RS_SHPWFE, DQC, BIDS, CONN, IS, BC, SDK, BOL, SSMS, ADV_SSMS, DREPLAY_CTLR, DREPLAY_CLT, SNAC_SDK, MDS
FILESTREAMLEVEL: 0
FILESTREAMSHARENAME: <empty>
FTSVCACCOUNT: NT Service\MSSQLFDLauncher
FTSVCPASSWORD: <empty>
HELP: false
IACCEPTSQLSERVERLICENSETERMS: false
INDICATEPROGRESS: false
INSTALLSHAREDDIR: C:\Program Files\Microsoft SQL Server\
INSTALLSHAREDWOWDIR: C:\Program Files (x86)\Microsoft SQL Server\
INSTALLSQLDATADIR: <empty>
INSTANCEDIR: C:\Program Files\Microsoft SQL Server\
INSTANCEID: MSSQLSERVER
INSTANCENAME: MSSQLSERVER
ISSVCACCOUNT: NT Service\MsDtsServer110
ISSVCPASSWORD: <empty>
ISSVCSTARTUPTYPE: Automatic
MATRIXCMBRICKCOMMPORT: 0
MATRIXCMSERVERNAME: <empty>
MATRIXNAME: <empty>
NPENABLED: 0
PID: *****
QUIET: false
QUIETSIMPLE: false
ROLE: <empty>
RSINSTALLMODE: FilesOnlyMode
RSSHPINSTALLMODE: SharePointFilesOnlyMode
RSSVCACCOUNT: NT Service\ReportServer
RSSVCPASSWORD: <empty>
RSSVCSTARTUPTYPE: Automatic
SAPWD: *****
SECURITYMODE: SQL
SQLBACKUPDIR: <empty>
SQLCOLLATION: Latin1_General_CI_AS
SQLSVCACCOUNT: NT Service\MSSQLSERVER
SQLSVCPASSWORD: <empty>
SQLSVCSTARTUPTYPE: Automatic
SQLSYSADMINACCOUNTS: RASHA-VAIO\RASHA
SQLTEMPDBDIR: <empty>
SQLTEMPDBLOGDIR: <empty>
SQLUSERDBDIR: <empty>
SQLUSERDBLOGDIR: <empty>
SQMREPORTING: false
TCPENABLED: 1
UIMODE: Normal
UpdateEnabled: true
UpdateSource: MU
X86: false
Configuration file: C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log\20150406_112342\ConfigurationFile.ini
Detailed results:
Feature: Management Tools - Complete
Status: Passed
Feature: Client Tools Connectivity
Status: Passed
Feature: Client Tools SDK
Status: Passed
Feature: Client Tools Backwards Compatibility
Status: Passed
Feature: Management Tools - Basic
Status: Passed
Feature: SQL Server Data Tools
Status: Passed
Feature: Database Engine Services
Status: Failed: see logs for details
Reason for failure: An error occurred during the setup process of the feature.
Next Step: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Component name: SQL Server Database Engine Services Instance Features
Component error code: 0x80004005
Error description: The service did not respond to the start or control request in a timely fashion.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.3128.0&EvtType=0xDC112D1C%400xDC80C325&EvtType=0xDC112D1C%400xDC80C325
Feature: Data Quality Services
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Component name: SQL Server Database Engine Services Instance Features
Component error code: 0x80004005
Error description: The service did not respond to the start or control request in a timely fashion.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.3128.0&EvtType=0xDC112D1C%400xDC80C325&EvtType=0xDC112D1C%400xDC80C325
Feature: Full-Text and Semantic Extractions for Search
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Component name: SQL Server Database Engine Services Instance Features
Component error code: 0x80004005
Error description: The service did not respond to the start or control request in a timely fashion.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.3128.0&EvtType=0xDC112D1C%400xDC80C325&EvtType=0xDC112D1C%400xDC80C325
Feature: SQL Server Replication
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Component name: SQL Server Database Engine Services Instance Features
Component error code: 0x80004005
Error description: The service did not respond to the start or control request in a timely fashion.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.3128.0&EvtType=0xDC112D1C%400xDC80C325&EvtType=0xDC112D1C%400xDC80C325
Feature: Master Data Services
Status: Passed
Feature: Distributed Replay Client
Status: Passed
Feature: Distributed Replay Controller
Status: Passed
Feature: Integration Services
Status: Failed: see logs for details
Reason for failure: An error occurred during the setup process of the feature.
Next Step: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Component name: SQL Server Integration Services
Component error code: 0x84BB0001
Error description: The service did not respond to the start or control request in a timely fashion.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.3128.0&EvtType=0xDC112D1C%400xDC80C325&EvtType=0xDC112D1C%400xDC80C325
Feature: Data Quality Client
Status: Passed
Feature: Reporting Services - Native
Status: Failed: see logs for details
Reason for failure: An error occurred during the setup process of the feature.
Next Step: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Component name: SQL Server Reporting Services
Component error code: 0x84BB0001
Error description: The service did not respond to the start or control request in a timely fashion.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.3128.0&EvtType=0xDC112D1C%400xDC80C325&EvtType=0xDC112D1C%400xDC80C325
Feature: Analysis Services
Status: Failed: see logs for details
Reason for failure: An error occurred during the setup process of the feature.
Next Step: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Component name: SQL Server Analysis Services
Component error code: 0x80131600
Error description: The service could not be started. Reason: The service did not respond to the start or control request in a timely fashion.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.3128.0&EvtType=0x88A466B0%400x857354B0&EvtType=0x88A466B0%400x857354B0
Feature: Reporting Services - SharePoint
Status: Passed
Feature: Reporting Services Add-in for SharePoint Products
Status: Passed
Feature: SQL Browser
Status: Passed
Feature: Documentation Components
Status: Passed
Feature: SQL Writer
Status: Passed
Feature: SQL Client Connectivity
Status: Passed
Feature: SQL Client Connectivity SDK
Status: Passed
Rules with failures:
Global rules:
Scenario specific rules:
Rules report file: C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log\20150406_112342\SystemConfigurationCheck_Report.htm
I hope it will help you to figure out ...i dont know how to solve this issue ..i have un install and re install more than 5 times.
thank you -
SQLException [Microsoft][ODBC SQL Server Driver] Function sequence error
I get this message when trying to write to a column of type 'IMAGE' on SQL Server 2000 when the size of the file I am trying to write is 0.
PreparedStatement ps = con.prepareStatement( "UPDATE " + dbSchema + "File set filename = ?, filetype = ?, filedata=? WHERE FileId= ?" );
ps.setString(1, fileName);
ps.setString(2, fileType);
fis = new FileInputStream( fileDataInput );
ps.setBinaryStream( 3, fis, (int)fileDataInput.length() );
ps.setInt(4, fileID);
ps.executeUpdate();
ps.close();
fis.close();
The Exception is thrown on ps.executeUpdate(). This only occurs when I try to save a file with a size of 0 bytes. I know this situation occuring in production is unlikely but I want to code for it anyway.
Any suggestions?
Thanks
AlIt took me a while to see the obvious. I put a condition on the SQL statement. If the file size was 0 then I didnt include the binary data in the update.
-
Crystal Report 13 Visual Studio 2010 SQL Server 2008 R2 ODBC Problem
Hi Everybody,
I am new in Crystal Report.
I developed a web application in Visual Studio 2010, and my Database is SQL Server 2008 R2.
I created reports using Crystal Report 13 in Visual Studio and my Operating System is Windows 7 32-Bit.
I used ODBC Connection System DNS for my application.
It is running fine even after Hosting on my local PC.
But it creates problem when hosted on my Team Leader PC and Test Server.
Their Configurations are same but only difference is "SQL Server 2008" Not R2
The Error I am getting is "Failed to open the connection".
When I Host the same on my another team member PC, I am getting the error like
"Failed to open the connection. Details: [Database Vendor Code: 4060 ] Database Connector Error: ' [Database Vendor Code: 4060 ]' Failed to open the connection. Failed to open the connection. TestVr {CE268132-D2BD-43EC-BE45-0BCD847FBCDA}.rpt Details: [Database Vendor Code: 4060 ]"
I tried various solution to fix this bug.
But i am unable to do this and not getting any idea to fix this issue.
If anyone can guide I will be thankful to him.
All suggestions are appreciable.
Thank youHi,
Please use the top right search box. for ex below search which will return many useful kb's, articlea and forum threads where simillar issues are discussed.
[http://www.sdn.sap.com/irj/scn/advancedsearch?query=failedtoopentheconnection|http://www.sdn.sap.com/irj/scn/advancedsearch?query=failedtoopentheconnection]
Most probably the issue is missing database client driver / provider.
Install the driver used to connect the rpt to the db on the server and then create a 32 bit DSN with the same name as the dev machine..
Hope this helps,
Bhushan. -
Discoverer 3.1.36 with SQL Server 2000 via ODBC..Problem!!!!
We are trying to install Oracle Discoverer 3.1.36 EUL on to SQL Server 2000. We are getting a error while creation of EUL.
"Installation started on 02-03-27 15:27:24
Creating tables and views...
Populating tables with default data...
Install failed, cause : [Microsoft][ODBC SQL Server Driver][SQL Server]Invalid column name 'SUID'.
CREATE VIEW EUL_ODBC_SCHEMAS AS SELECT NAME AS 'os_schema_name' FROM SYSUSERS WHERE SUID > 1 AND UID <> GID
Please help
Regards and Thanks in advance
DheerajThanx for ur cooperation. I have solved the problem. Actually I was using Eclipse SDK but for get to Add external Jar files. In which I need to add the JAR files in the lib directory of Driver's Home Directory
Thanx... -
SQL SERVER 2012 cube deployment error
I am a first time SQL server user trying to do the Analysis Services Tutorials. I am on the last part of Lesson 2 where the cube is deployed. Here is my error message. Note: I did have permission issues originally when trying upload AdventureWorksDW2012.
Can anyone help me here?
Warning 1 Dimension [Date] : Create hierarchies in non-parent child dimensions. 0 0
Warning 2 Dimension [Customer] : Create hierarchies in non-parent child dimensions. 0 0
Warning 3 Dimension [Product] : Create hierarchies in non-parent child dimensions. 0 0
Error 4 Internal error: The operation terminated unsuccessfully. 0 0
Error 5 Server: The current operation was cancelled because another operation in the transaction failed. 0 0
Error 6 OLE DB error: OLE DB or ODBC error: Login failed for user 'NT Service\MSSQLServerOLAPService'.; 28000. 0 0
Error 7 Errors in the high-level relational engine. A connection could not be made to the data source with the DataSourceID of 'Adventure Works DW2012', Name of 'Adventure Works DW2012'. 0
0
Error 8 Errors in the OLAP storage engine: An error occurred while the dimension, with the ID of 'Customer', Name of 'Customer' was being processed. 0 0
Error 9 Errors in the OLAP storage engine: An error occurred while the 'Geography Key' attribute of the 'Customer' dimension from the 'Analysis Services t' database was being processed. 0
0
Error 10 OLE DB error: OLE DB or ODBC error: Login failed for user 'NT Service\MSSQLServerOLAPService'.; 28000. 0 0
Error 11 Errors in the high-level relational engine. A connection could not be made to the data source with the DataSourceID of 'Adventure Works DW2012', Name of 'Adventure Works DW2012'. 0
0
Error 12 Errors in the OLAP storage engine: An error occurred while the dimension, with the ID of 'Customer', Name of 'Customer' was being processed. 0 0
Error 13 Errors in the OLAP storage engine: An error occurred while the 'Birth Date' attribute of the 'Customer' dimension from the 'Analysis Services t' database was being processed. 0
0So i went into SQL server configuration manager, right clicked on SQL Service Analysis Services and chose the built-in (On network)but now i have even more errors. 57 this time.
Warning 1 Dimension [Date] : Create hierarchies in non-parent child dimensions. 0 0
Warning 2 Dimension [Customer] : Create hierarchies in non-parent child dimensions. 0 0
Warning 3 Dimension [Product] : Create hierarchies in non-parent child dimensions. 0 0
Error 4 Internal error: The operation terminated unsuccessfully. 0 0
Error 5 OLE DB error: OLE DB or ODBC error: Login failed for user 'WORKGROUP\COOK-PC$'.; 28000. 0 0
Error 6 Errors in the high-level relational engine. A connection could not be made to the data source with the DataSourceID of 'Adventure Works DW2012', Name of 'Adventure Works DW2012'. 0
0
Error 7 Errors in the OLAP storage engine: An error occurred while the dimension, with the ID of 'Customer', Name of 'Customer' was being processed. 0 0
Error 8 Errors in the OLAP storage engine: An error occurred while the 'Total Children' attribute of the 'Customer' dimension from the 'Analysis Services t' database was being processed. 0
0
Error 9 Server: The current operation was cancelled because another operation in the transaction failed. 0 0
Error 10 OLE DB error: OLE DB or ODBC error: Login failed for user 'WORKGROUP\COOK-PC$'.; 28000. 0 0
Error 11 Errors in the high-level relational engine. A connection could not be made to the data source with the DataSourceID of 'Adventure Works DW2012', Name of 'Adventure Works DW2012'. 0
0
Error 12 Errors in the OLAP storage engine: An error occurred while the dimension, with the ID of 'Customer', Name of 'Customer' was being processed. 0 0
Error 13 Errors in the OLAP storage engine: An error occurred while the 'Marital Status' attribute of the 'Customer' dimension from the 'Analysis Services t' database was being processed. 0
0
Error 14 OLE DB error: OLE DB or ODBC error: Login failed for user 'WORKGROUP\COOK-PC$'.; 28000. 0 0
Error 15 Errors in the high-level relational engine. A connection could not be made to the data source with the DataSourceID of 'Adventure Works DW2012', Name of 'Adventure Works DW2012'. 0
0
Error 16 Errors in the OLAP storage engine: An error occurred while the dimension, with the ID of 'Customer', Name of 'Customer' was being processed. 0 0
Error 17 Errors in the OLAP storage engine: An error occurred while the 'English Education' attribute of the 'Customer' dimension from the 'Analysis Services t' database was being processed.
0 0 -
Trying to Connect to Reports 6i/NT Developer to SQL Server 7 using ODBC
I am trying to connect Reports 6i Developer on NT through ODBC to SQL Server 7 (on same NT machine), and get an error message:
ORA00022: invalid session id; access denied.
When I try connecting using SQL*Plus, I get the following message:
SQL*Plus: Release 8.0.6.0.0 - Production on Thu Mar 15 09:57:48 2001
(c) Copyright 1999 Oracle Corporation. All rights reserved.
ORA-00022: invalid session id; access denied
ORA-00022: invalid session id; access denied
ORA-00022: invalid session id; access denied
Error accessing PRODUCT_USER_PROFILE
Warning: Product user profile information not loaded!
You may need to run PUPBLD.SQL as SYSTEM
Server not available or version too low for this feature
ORA-00022: invalid session id; access denied
I can run SQL queries only after I have run a DESC <table name> command once. Otherwise, I get the following error:
SQL> select * from authors;
SQL*Plus internal error state 2090, context 246:0:0
Unsafe to proceed
Even with a DESC command is run, I can connect, but with an error as follows:
SQL> desc authors
ORA-00022: invalid session id; access denied
Name Null? Type
AU_ID NOT NULL VARCHAR2(11)
AU_LNAME NOT NULL VARCHAR2(40)...
ODBC Drivers used: I get the same results in Reports 6i and SQL *Plus with the Intersolv/Merant or Microsoft ODBC drivers for SQL Server. (Merant Version 3.7 for 32-bit SQL Server 6, 12/1/00)
Please HELP.harry,
i am assuming you are using 6.0.8.8 of reports6i, which is base-release. there have been problems withthe OCA in this version. by using the latest patch you should solve this problem. for further details, please contact oracle support services.
regards,
the oracle reports team -
Unable to install SQL Server Express 2008 R2 - Errors "Failed to retrieve data for this request"
As domain admin I am attempting to install "SQL Server 2008 R2 with SP2" but it keeps failing with "Failed to retrieve data for this request".
The installation never actually starts, it errors before then.
It displays the same error even if I run the System Configuration Checker.
The summary.txt for the install displays the following text:
Overall summary:
Final result: Failed: see details below
Exit code (Decimal): -1554760125
Exit facility code: 852
Exit error code: 15939
Exit message: Failed to retrieve data for this request.
Start time: 2014-08-15 16:49:52
End time: 2014-08-15 16:50:06
Requested action: RunRules
Machine Properties:
Machine name: servername
Machine processor count: 8
OS version: Windows Server 2008 R2
OS service pack: Service Pack 1
OS region: United States
OS language: English (United States)
OS architecture: x64
Process architecture: 64 Bit
OS clustered: Yes
Product features discovered:
Product Instance Instance ID
Feature Language
Edition Version Clustered
Package properties:
Description: SQL Server Database Services 2008 R2
ProductName: SQL Server 2008 R2
Type: RTM
Version: 10
SPLevel: 1
Installation location: c:\84122ef5b6d9cdcd3b2ac48cec\x64\setup\
Installation edition: EXPRESS
User Input Settings:
ACTION: RunRules
CONFIGURATIONFILE:
ENU: True
FARMACCOUNT: <empty>
FARMADMINPORT: 0
FARMPASSWORD: *****
FEATURES:
HELP: False
INDICATEPROGRESS: False
INSTANCENAME: <empty>
PASSPHRASE: *****
QUIET: False
QUIETSIMPLE: False
RULES: GLOBALRULES,SqlUnsupportedProductBlocker,PerfMonCounterNotCorruptedCheck,Bids2008InstalledCheck,BlockInstallSxS,AclPermissionsFacet,FacetDomainControllerCheck,SSMS_IsInternetConnected,FacetWOW64PlatformCheck,FacetPowerShellCheck
UIMODE: AutoAdvance
X86: False
Configuration file: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20140815_164944\ConfigurationFile.ini
Detailed results:
Rules with failures:
Global rules:
There are no scenario-specific rules.
Rules report file: The rule result report file is not available.
Exception summary:
The following is an exception stack listing the exceptions in outermost to innermost order
Inner exceptions are being indented
Exception type: Microsoft.SqlServer.Management.Sdk.Sfc.EnumeratorException
Message:
Failed to retrieve data for this request.
Data:
HelpLink.ProdName = Microsoft SQL Server
HelpLink.BaseHelpUrl = http://go.microsoft.com/fwlink
HelpLink.LinkId = 20476
DisableWatson = true
Stack:
at Microsoft.SqlServer.Management.Sdk.Sfc.Enumerator.Process(Object connectionInfo, Request request)
at Microsoft.SqlServer.Chainer.Infrastructure.SqlDiscoveryDatastoreInterface.ProcessDTbl(DataTable dt, Int32 level)
at Microsoft.SqlServer.Chainer.Infrastructure.SqlDiscoveryDatastoreInterface.CollectSqlDiscoveryData(String machineName)
at Microsoft.SqlServer.Chainer.Infrastructure.SqlDiscoveryDatastoreInterface.LoadData(IEnumerable`1 machineNames, String discoveryDocRootPath, String clusterDiscoveryDocRootPath)
at Microsoft.SqlServer.Configuration.SetupExtension.RunDiscoveryAction.ExecuteAction(String actionId)
at Microsoft.SqlServer.Chainer.Infrastructure.Action.Execute(String actionId, TextWriter errorStream)
at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.ExecuteActionHelper(TextWriter statusStream, ISequencedAction actionToRun)
Inner exception type: Microsoft.SqlServer.Configuration.Sco.SqlRegistryException
Message:
The network path was not found.
Data:
WatsonData = [email protected]rror
Stack:
at Microsoft.SqlServer.Configuration.Sco.SqlRegistry.CreateBaseKey(ServiceContainer ctx, String machineName, IntPtr hKey, String keyName, RegistryAccess access, RegistryView
view)
at Microsoft.SqlServer.Configuration.Sco.SqlRegistry.GetLocalMachine(ServiceContainer ctx, String machineName, RegistryAccess access, RegistryView view)
at Microsoft.SqlServer.Discovery.DiscoveryEnumObject.GetSql2kMsiInstanceListInHive(String machineName, RegistryView regView)
at Microsoft.SqlServer.Discovery.DiscoveryEnumObject.LoadSql2kInstanceList(String machineName)
at Microsoft.SqlServer.Discovery.Product.GetData(EnumResult erParent)
at Microsoft.SqlServer.Management.Sdk.Sfc.Environment.GetData()
at Microsoft.SqlServer.Management.Sdk.Sfc.Enumerator.GetData(Object connectionInfo, Request request)
at Microsoft.SqlServer.Management.Sdk.Sfc.Enumerator.Process(Object connectionInfo, Request request)Inner exception type: Microsoft.SqlServer.Configuration.Sco.SqlRegistryException
Message:
The network path was not found.
Data:
WatsonData = [email protected]rror
Above message says that your registry is not consistent and some of the parameters are missing from registry.Or
Account installing SQL server does not have permission to access this. I think case can be here that account with which you logged into your system to install SQL Server might not have certain privileges. Can you take help
of domain admin account add it as a local administrator in this machine always right click on setup file and select run as administrator. Before this make sure you remove all SQL Server components from add remove program
I strongly recommend you to have a good look at below thread
http://support.microsoft.com/kb/2000257/en-us
Please mark this reply as answer if it solved your issue or vote as helpful if it helped so that other forum members can benefit from it.
My TechNet Wiki Articles -
[Error] Microsoft SQL Server 2008 Setup. Error reading from file msdbdata.mdf
Hi all
I'm trying to install SQL 2008 Express on my Computer: Hp compact DX7300 Slim tower.
and get this error:
TITLE: Microsoft SQL Server 2008 Setup
The following error has occurred:Error reading from file d:\8268cd7b247d294de359c9\x86\setup\sql_engine_core_inst_msi\PFiles\SqlServr\MSSQL.X\MSSQL\Binn\Template\msdbdata.mdf. Verify that the file exists and that you can access it.
Click 'Retry' to retry the failed action, or click 'Cancel' to cancel this action and continue setup.
For help, click: http://go.microsoft.com/fwlink?LinkID=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=10.0.1823.0&EvtType=0xF45F6601%25401201%25401
Log file
Overall summary:
Final result: SQL Server installation failed. To continue, investigate the reason for the failure, correct the problem, uninstall SQL Server, and then rerun SQL Server Setup.
Exit code (Decimal): -2068643839
Exit facility code: 1203
Exit error code: 1
Exit message: SQL Server installation failed. To continue, investigate the reason for the failure, correct the problem, uninstall SQL Server, and then rerun SQL Server Setup.
Start time: 2014-12-09 23:22:03
End time: 2014-12-09 23:40:28
Requested action: Install
Log with failure: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20141209_232121\sql_engine_core_inst_Cpu32_1.log
Exception help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=10.0.1823.0
Machine Properties:
Machine name: VISTA-PC
Machine processor count: 2
OS version: Windows Vista
OS service pack: Service Pack 1
OS region: United States
OS language: English (United States)
OS architecture: x86
Process architecture: 32 Bit
OS clustered: No
Product features discovered:
Product Instance Instance ID Feature
Language Edition Version Clustered
Package properties:
Description: SQL Server Database Services 2008
SQLProductFamilyCode: {628F8F38-600E-493D-9946-F4178F20A8A9}
ProductName: SQL2008
Type: RTM
Version: 10
SPLevel: 0
Installation location: d:\8268cd7b247d294de359c9\x86\setup\
Installation edition: EXPRESS
User Input Settings:
ACTION: Install
ADDCURRENTUSERASSQLADMIN: False
AGTSVCACCOUNT: NT AUTHORITY\NETWORK SERVICE
AGTSVCPASSWORD: *****
AGTSVCSTARTUPTYPE: Disabled
ASBACKUPDIR: Backup
ASCOLLATION: Latin1_General_CI_AS
ASCONFIGDIR: Config
ASDATADIR: Data
ASDOMAINGROUP: <empty>
ASLOGDIR: Log
ASPROVIDERMSOLAP: 1
ASSVCACCOUNT: <empty>
ASSVCPASSWORD: *****
ASSVCSTARTUPTYPE: Automatic
ASSYSADMINACCOUNTS: <empty>
ASTEMPDIR: Temp
BROWSERSVCSTARTUPTYPE: Disabled
CONFIGURATIONFILE: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20141209_232121\ConfigurationFile.ini
ENABLERANU: True
ERRORREPORTING: False
FEATURES: SQLENGINE,REPLICATION
FILESTREAMLEVEL: 0
FILESTREAMSHARENAME: <empty>
FTSVCACCOUNT: <empty>
FTSVCPASSWORD: *****
HELP: False
INDICATEPROGRESS: False
INSTALLSHAREDDIR: C:\Program Files\Microsoft SQL Server\
INSTALLSHAREDWOWDIR: C:\Program Files\Microsoft SQL Server\
INSTALLSQLDATADIR: <empty>
INSTANCEDIR: C:\Program Files\Microsoft SQL Server\
INSTANCEID: SQLExpress
INSTANCENAME: SQLEXPRESS
ISSVCACCOUNT: NT AUTHORITY\NetworkService
ISSVCPASSWORD: *****
ISSVCSTARTUPTYPE: Automatic
MEDIASOURCE: d:\8268cd7b247d294de359c9\
NPENABLED: 0
PID: *****
QUIET: False
QUIETSIMPLE: False
RSINSTALLMODE: FilesOnlyMode
RSSVCACCOUNT: <empty>
RSSVCPASSWORD: *****
RSSVCSTARTUPTYPE: Automatic
SAPWD: *****
SECURITYMODE: <empty>
SQLBACKUPDIR: <empty>
SQLCOLLATION: SQL_Latin1_General_CP1_CI_AS
SQLSVCACCOUNT: NT AUTHORITY\NETWORK SERVICE
SQLSVCPASSWORD: *****
SQLSVCSTARTUPTYPE: Automatic
SQLSYSADMINACCOUNTS: VISTA-PC\VISTA
SQLTEMPDBDIR: <empty>
SQLTEMPDBLOGDIR: <empty>
SQLUSERDBDIR: <empty>
SQLUSERDBLOGDIR: <empty>
SQMREPORTING: False
TCPENABLED: 0
X86: False
Configuration file: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20141209_232121\ConfigurationFile.ini
Detailed results:
Feature: Database Engine Services
Status: Failed: see logs for details
MSI status: Passed
Configuration status: Passed
Feature: SQL Server Replication
Status: Failed: see logs for details
MSI status: Passed
Configuration status: Passed
Rules with failures:
Global rules:
Scenario specific rules:
Rules report file: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20141209_232121\SystemConfigurationCheck_Report.htm
I will very appriciate if someone can help me solve it. I was trying to set Full control for my account in Properties/Security of root folder and try again but error is still.
Many thanksHi Foreverduy,
Before you run SQL Server 2008 express setup, make sure that you have installed Windows installer 4.5 and.NET Framework 3.5 SP1 manually. For more information about the process, please refer to the article:
http://msdn.microsoft.com/en-us/library/ms143506(v=sql.100).aspx. Moreover, please turn off all the third-party softwares which could prohibit the installation process.
According to your error message, the issue could be due to that your account has no rights to install SQL Server, or the corruption on the media.
Firstly, please ensure that your account has admin rights. Also make sure that you right-click the setup.exe and choose “Run as administrator” to complete the installation.
Secondly, please check if "msdbdata.mdf" file exists at d:\8268cd7b247d294de359c9\x86\setup\sql_engine_core_inst_msi\PFiles\SqlServr\MSSQL.X\MSSQL\Binn\Template. If it exists, please make sure that your account has read permission to the extracted
folder.
However, if the file doesn't exist in the extraction, the media could be corrupt. Please download the
media
again and check if the issue still occurs.
Regards,
Michelle Li
Maybe you are looking for
-
Firefox crashes when trying to open Add-Ons menu
Firstly the search bar that s part of the Google toolbar would not search what i typed in it, it would simply do nothing. After I discovered this I decided to go look at the add-on or something in the add-on menu under tools. When I clicked "Add-On"
-
I am having an issue with duplicate Libraries showing up in my Home Sharing "Home Videos". It happens when I import home videos into iTunes and change the names of the files. How do I avoid this from happening and delete the duplicate libraries?
-
SELECT COUNT( ) gives warning in ECC6.0.
Hi, The following query is giving syntax error in ECC6.0, where as it worked absolutely fine in 3.1i server. SELECT COUNT( OBOX_CNTNO ) FROM ZT2OB INTO W_COUNT WHERE SUPPL_CD = W_SUPPL_CD
-
You can see what I am working on here: http://www.slimscents.com/newsite/ (under development). What happens is this... Rolling over a div creates a fade effect on a target div, and it works. However (especially on IE 7) rolling over another div whils
-
Listening for an event outside of the object...
Hey, I spent a lot of my day trying to figure out how to listen for an event outside of an instantiated object of my own. I made my own class called Link. When my Link class is instantiated, a Loader object (var loader:Loader) is added and it loads a