SQL Server Agent Error

we are constantly getting this error from event log: what is the remedy.
Unable to read local eventlog (the parameter is incorrect)

Hi Madalo,
Did the issue resolved?
What's the version and service pack level of the SQL Server instance did you installed? Please try to install the latest service pack. You can download and install SQL Server service pack from the following link:
Update Center for Microsoft SQL Server
If the issue persists, please post the SQL Server error log for further analysis.
Regards,
Fanny Liu
Fanny Liu
TechNet Community Support

Similar Messages

  • Schedule SSIS packages as job in SQL Server Agent errors

    Hi, I am using SQL Server 2008 R2 and created few SSIS packages and schedule them using SQL Server Agent and every time I try to schedule packages via SQL Server Agent my jobs keep failing. I am using domain/ione as the owner and when I invoke the job on
    ServerA let's say and the job gets executed by domain/ServerA$ and fails as it does not have enough privileges. How do I fix this issue firstly without the proxy and why is the job being executed by domain/ServerA$ when the owner & user who invokes
    it is domain/ione?
    Thanks in advance............
    Ione

    Hi Ione,
    The owner of any SQL jobs should be SA or any other non-expiring account
    If you do not want the proxy used, then add the needed priveleges.
    The owner of the job is one, the SSIS step gets executed by the account the Agent is running under.
    Arthur
    MyBlog
    Twitter

  • SQL Server Agent - [165] ODBC Error: 0, Named Pipes Provider: Could not open a connection to SQL Server [2]. [SQLSTATE 08001]

    Hi,
    I keep receiving the error below in the SQL Server Agent Error Log;
    [165] ODBC Error: 0, Named Pipes Provider: Could not open a connection to SQL Server [2]. [SQLSTATE 08001]
    It is occurring approximately 20 times an hour and i cannot link it to any job failures. All jobs on the same SQL instance are working.
    The server is a clustered server and there are no errors occuring in the SQL Server error log at the same time. I have attempted to trace using profiler looking for errors and warnings but anything that does occur doesn't seem to correspond to the reported
    times of the errors within the sql agent error log.
    Please could someone point me where to look next?
    Many thanks.

    Please may I add that this is on a SQL Server 2008 R2 Enterprise edition patched to 10.50.1600.
    Nah, that server is not patched at all, because 10.50.1600 is the RTM version. Find Service Pack 2 and install at the next maintenance window, after having performed tests according to your local policy.
    It is not going to resolve your particular problem though.
    It seems like you have a job that attempts to a connect to s server that is down or non-existing. The job may be configured to return success also on failures. I would check if there are jobs that target other servers.
    Erland Sommarskog, SQL Server MVP, [email protected]

  • SQL Server Agent - Job History not being recorded (SQL Server 2005)

    I have been trying to get to the bottom of an issue with SQL Server Agent not recording any job history. I am using SQL Server 2005 on a single Windows Server 2008 machine (i.e. no other domain controllers/active directory servers).
    The SQL Server Agent service is configured to 'Log On As' NT user account 'sqlagent'. The jobs themselves are executed successfully (all 'Transact-SQL' type steps actually use the 'sa' account) however the there is no actual job history to be found for any
    of the jobs -- in the SQL Activity monitor, the 'Last Run Outcome' is always 'Unknown' and the 'Last Run' date is always 'Never' for all jobs; in the SQL Job History Viewer there are no entries for any instances of a job being executed.
    The 'sqlagent' NT user account ia a member of the 'Administrators' NT group; the 'Administrators' group appears under Security > Logins on the database server. I have another server that also uses the same setup with a 'sqlagent' NT user account, on that
    database server the 'sqlagent' user account appears under Security > Logins and the SQL job history works correctly. I have attempted to add the 'sqlagent' to the Logins on the affected server using the SQL Server Surface Area configuration but this operation
    returns an error, detailed below.
    Additionally, I have attempted to use the built-in NT system account 'NETWORKSEVICES' to run the SQL Agent Service but this also results in exceptions in the error log and no job history being recorded. The entries in the error logs are very similar to those
    from the 'sqlagent' NT user account but instead the user is referred to as 'NT AUTHORITY\ANONYMOUS LOGON' in the error logs, again these are detailed below.
    Many thanks in advance for anyone's time and help with this issue!
    Arthur
    The following errors are raised in SQL Server Agent > Error Logs each time a job is executed:
    Date 11/11/2012 18:30:01
    Log SQL Agent (Current - 11/11/2012 18:30:00)
    Message
    [298] SQLServer Error: 18452, Login failed for user ''. The user is not associated with a trusted SQL Server connection. [SQLSTATE 28000]
    Date 11/11/2012 18:30:01
    Log SQL Agent (Current - 11/11/2012 18:30:00)
    Message
    [382] Logon to server 'XXXXXXXX' failed (ConnAttemptCachableOp)
    If the SQLAgent service is configured to use the NT system account 'NETWORKSERVICE' then the following errors are returned instead:
    Date 29/10/2012 18:30:15
    Log SQL Agent (Archive #1 - 29/10/2012 18:38:00)
    Message
    [298] SQLServer Error: 18456, Login failed for user 'NT AUTHORITY\ANONYMOUS LOGON'. [SQLSTATE 28000]
    Date 29/10/2012 18:30:15
    Log SQL Agent (Archive #1 - 29/10/2012 18:38:00)
    Message
    [382] Logon to server 'XXXXXXXX' failed (ConnAttemptCachableOp)
    I have tried granting the 'sqlagent' NT user account with SysAdmin Server Role privaledges using the SQL Server User Provisioning tool in SQL Server Surface Area Configuration, but this always throws the following, similar error:
    Login failed for user ''. The user is not associated with a trusted SQL Server connection. (Error: 18452)
    ===================================
    Login failed for user ''. The user is not associated with a trusted SQL Server connection. (.Net SqlClient Data Provider)
    For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&EvtSrc=MSSQLServer&EvtID=18452&LinkId=20476
    Server Name: 127.0.0.1,1344
    Error Number: 18452
    Severity: 14
    State: 1
    Line Number: 65536
    Program Location:
       at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection)
       at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj)
       at System.Data.SqlClient.TdsParser.Run(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj)
       at System.Data.SqlClient.SqlInternalConnectionTds.CompleteLogin(Boolean enlistOK)
       at System.Data.SqlClient.SqlInternalConnectionTds.AttemptOneLogin(ServerInfo serverInfo, String newPassword, Boolean ignoreSniOpenTimeout, Int64 timerExpire, SqlConnection owningObject)
       at System.Data.SqlClient.SqlInternalConnectionTds.LoginNoFailover(String host, String newPassword, Boolean redirectedUserInstance, SqlConnection owningObject, SqlConnectionString connectionOptions, Int64 timerStart)
       at System.Data.SqlClient.SqlInternalConnectionTds.OpenLoginEnlist(SqlConnection owningObject, SqlConnectionString connectionOptions, String newPassword, Boolean redirectedUserInstance)
       at System.Data.SqlClient.SqlInternalConnectionTds..ctor(DbConnectionPoolIdentity identity, SqlConnectionString connectionOptions, Object providerInfo, String newPassword, SqlConnection owningObject, Boolean redirectedUserInstance)
       at System.Data.SqlClient.SqlConnectionFactory.CreateConnection(DbConnectionOptions options, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningConnection)
       at System.Data.ProviderBase.DbConnectionFactory.CreatePooledConnection(DbConnection owningConnection, DbConnectionPool pool, DbConnectionOptions options)
       at System.Data.ProviderBase.DbConnectionPool.CreateObject(DbConnection owningObject)
       at System.Data.ProviderBase.DbConnectionPool.UserCreateRequest(DbConnection owningObject)
       at System.Data.ProviderBase.DbConnectionPool.GetConnection(DbConnection owningObject)
       at System.Data.ProviderBase.DbConnectionFactory.GetConnection(DbConnection owningConnection)
       at System.Data.ProviderBase.DbConnectionClosed.OpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory)
       at System.Data.SqlClient.SqlConnection.Open()
       at sqlprov.SysAdminServerRole.ProvisionInstance(Instance instance, String userName)
       at sqlprov.ProvisionTask.Provision(Instance instance, String userName)
       at sqlprov.MainForm.ProvisionTasks()

    Hi Rama,
    Thanks for your reply. I have run the query you specified and can see only one entry with "NTLM" in the auth_scheme column, all of the rest have "SQL". It figures that the entry with "NTLM" is relating to the one NT user account that can successfully log
    in to the service (as mentioned in my reply to Nag above, this is the NT user account that installed the service on the machine). I have also executed the same query on the other machine that I mentioned in my original post and this contains two "NTLM" entries,
    I'd assume that these relate to the NT user that installed the software and the correctly working "sqlagent" NT user account that is correctly logging the job history on that machine.
    I think the problem is very much to do with granting access to new NT user accounts, as per the KB article that you have quoted above. In this case, it is not relating to scenarios 1 or 2 as these relate to SQL Server logins and this issue is about a Windows
    Authentication login. As I mentioned to Nag above, I am unable to grant any NT user accounts with access to the service however the NT accounts are all defined locally on the same machine as the SQL server is installed (i.e. there is no domain controller,
    active directory controller, etc) so I don't understand how the Windows login cannot be verified.
    Any further advice on the issue would be greatly appreciated, please let me know if there is any more information I can provide to help diagnose the problem.
    Many thanks!
    Arthur

  • Logs for sql server agent restart

    Hi,
      Can I get log on the sql server agent  restart history of week. I mean the sql server agent has been restarted several times in last week I want to know the date and time when the sql server agent restarted in that week. Is it possible to get
    the info?
    Thanks in advance,
    Pavan
    Pavan

    In addition to Uri's post, here is some more information that might help you:
    SQLAGENT.OUT, the log file for SQL Agent. SQL Server Agent can maintain up to 10 Error Logs files. The currently used SQL Server Agent Error Log will be named SQLAGENT.OUT
    where is the SQLAGENT.OUT file?
    C:\Program Files\Microsoft SQL Server\MSSQL11.SQL2012\MSSQL\Log\
    What will be when a new file create?
    The old file should get a name like SQLAGENT.X and the new file get the name SQLAGENT.OUT (X is numbers 1-9)
    This can help you to get more information on sql agent properties (like the location of the log file, the user that start the service and more):
    EXEC msdb..sp_get_sqlagent_properties
    [Personal Site] [Blog] [Facebook]

  • Error While executing a SSIS package which contains a script task through SQL Server Agent job

    Hi,
    I have a SQL Server 2012 SSIS package with a script task along with other tasks [data flow, execute sql tasks ]. When I manually executed the job through BIDS, its completed successfully. 
    Then I have automated the execution of the package through SQL Server Agent Job. But when I executed the package through SQL Agent job, it runs successfully for all the tasks except script task. When it comes to execute the Script Task, it is getting failed
    with the below error message.
    "Error: 2012-08-29 12:45:14.67
       Code: 0x00000001
       Source: Script Task 
       Description: Exception has been thrown by the target of an invocation.
    End Error
    DTExec: The package execution returned DTSER_FAILURE (1).
    Started:  12:45:10 PM
    Finished: 12:45:14 PM
    Elapsed:  4.353 seconds
    I have installed the SSIS on the 64-bit environment and SSIS service is running. Also I tried to run the job through 32 bit [job option] but I am getting the above error in all cases.
    Any help will be greatly appreaciated !
    Thanks,
    Navin
    - naveen.reddy

    Hi Arthur,
    My script task access the excel files in a network share, refresh them all and save them. When I execute the ETL manually or thru DTEXEC, it is executing successfully. I am facing the issue when I am executing thru SQL Agent Job only. Logging also showing
    the same error.
    "Error: 2012-08-23 12:45:14.67
       Code: 0x00000001
       Source: Script Task 
       Description: Exception has been thrown by the target of an invocation.
    End Error
    DTExec: The package execution returned DTSER_FAILURE (1).
    Started:  12:45:10 PM
    Finished: 12:45:14 PM
    Elapsed:  4.353 seconds
    - naveen.reddy

  • Error while executing SSIS package which contains Script component through SQL Server Agent Job

    Hello All,
    I have written one SSIS 2012 package which is fetching records from CSV and put it into staging DB and from staging DB , using SSIS script component task, I am inserting data into Dynamics CRM. So far it is working fine when
    I manually execute SSIS package.
    but when I run the SSIS package using SQL server agent job, I encounter below error. After seeing below error at step "Insert TLM Headers Script Component " I understand that it is failing at script component which I have used in SSIS package,
    but I am not sure what is the cause behind that? please advise.
    Error:
    Executed as user: domain\user account. Microsoft (R) SQL Server Execute Package Utility  Version 11.0.5556.0 for 64-bit  Copyright (C) Microsoft Corporation. All rights reserved.    Started:  1:21:41 PM  Error: 2015-02-25
    13:21:45.94     Code: 0xC0047062     Source: Insert TLM Headers Script Component [205]     Description: System.ServiceModel.FaultException: The server was unable to process the request due to an internal
    error.  For more information about the error, either turn on IncludeExceptionDetailInFaults (either from ServiceBehaviorAttribute or from the <serviceDebug> configuration behavior) on the server in order to send the exception information back to
    the client, or turn on tracing as per the Microsoft .NET Framework 3.0 SDK documentation and inspect the server trace logs.    Server stack trace:      at System.ServiceModel.Channels.ServiceChannel.ThrowIfFaultUnderstood(Message
    reply, MessageFault fault, String action, MessageVersion version, FaultConverter faultConverter)     at System.ServiceModel.Channels.ServiceChannel.HandleReply(ProxyOperationRuntime operation, ProxyRpc& rpc)    
    at System.ServiceModel.Channels.ServiceChannel.Call(String action, Boolean oneway, ProxyOperationRuntime operation, Object[] ins, Object[] outs, TimeSpan timeout)     at System.ServiceModel.Channels.ServiceChannelProxy.InvokeService(IMethodCallMessage
    methodCall, ProxyOperationRuntime operation)     at System.ServiceModel.Channels.ServiceChannelProxy.Invoke(IMessage message)    Exception rethrown at [0]:      at Microsoft.SqlServer.Dts.Pipeline.ScriptComponentHost.HandleUserException(Exception
    e)     at Microsoft.SqlServer.Dts.Pipeline.ScriptComponentHost.ProcessInput(Int32 inputID, PipelineBuffer buffer)     at Microsoft.SqlServer.Dts.Pipeline.ManagedComponentHost.HostProcessInput(IDTSManagedComponentWrapper100
    wrapper, Int32 inputID, IDTSBuffer100 pDTSBuffer, IntPtr bufferWirePacket)  End Error  Error: 2015-02-25 13:21:45.94     Code: 0xC0047022     Source: Insert TLM Headers SSIS.Pipeline    
    Description: SSIS Error Code DTS_E_PROCESSINPUTFAILED.  The ProcessInput method on component "Script Component" (205) failed with error code 0x80131501 while processing input "Input 0" (215). The identified component returned an error
    from the ProcessInput method. The error is specific to the component, but the error is fatal and will cause the Data Flow task to stop running.  There may be error messages posted before this with more information about the failure.  End Error 
    DTExec: The package execution returned DTSER_FAILURE (1).  Started:  1:21:41 PM  Finished: 1:21:45 PM  Elapsed:  4.009 seconds.  The package execution failed.  The step failed.
    Thanks
    Pankaj

    domain\user account has not proper rights
    That being said, often SSIS jobs require a proxy to be runnable and this is how you make one up
    http://www.mssqltips.com/sqlservertip/2163/running-a-ssis-package-from-sql-server-agent-using-a-proxy-account/
    Arthur
    MyBlog
    Twitter

  • Error: Failed to acquire connection while exporting a file using SSIS package through SQl Server Agent job.

    Hi Team,
    I am running a sql server job which is loading data to a sharepoint document library.File is an excel format and is getting loaded
    when executed through SSDT solution .But when i am using an SQL Agent job to pick up the file it doesnt get the path and agent job fails with the error "Failed to acquire connection".I have deployed the SSIS Package through SQL Server 2012 deployment
    methodologies.
    I am not able to trace the error of loading data from a sharepoint library.library. Sql agent jobs works fine when i give local path.The
    account which is running the sql agent job is the same who has access to document library.I also tried to run the job through proxy account. I am using a xml configuraion to store my credentials.I am able to palce the same file to a network drive in the same
    server through sql server agent job. The only problem is when I am trying to load the file to a sharepoint folder.
    Thanks,
    Arsa..

    Is that the WebDAV method that you are suggesting here to map the n/w drive?
    Its kind of webdav but you will be using windows nw drive to store data
    yes, I am able to create the file to D: , but didn't check with the C:.
    Try with c:, as c: require special permisssions
    If this helped you resolve your issue, please mark it Answered

  • SQL Server Agent Jobs error for Slowly changing dimension

    Hi,
    I have implemented Slowly changing dimension in 5 of my packages for lookup insert/update.
    All the packages are running good in SSDT. And when i deployed the project to SSISDB and run the packages all are running successfully. But when i created a job out of that and run the packages, then 3 packages ran successfully and 2 packages failed. 
    When i opened All Execution Report. I found the following error:
    Message
    Message Source Name
    Subcomponent Name
    Process Provider:Error: SSIS Error Code DTS_E_OLEDBERROR.  An OLE DB error has occurred. Error code: 0x80004005. An OLE DB record is available.  Source: "Microsoft SQL Server Native Client 10.0"  Hresult: 0x80004005  Description:
    "Login timeout expired". An OLE DB record is available.  Source: "Microsoft SQL Server Native Client 10.0"  Hresult: 0x80004005  Description: "A network-related or instance-specific error has occurred while establishing
    a connection to SQL Server. Server is not found or not accessible. Check if instance name is correct and if SQL Server is configured to allow remote connections. For more information see SQL Server Books Online.". An OLE DB record is available. 
    Source: "Microsoft SQL Server Native Client 10.0"  Hresult: 0x80004005  Description: "Named Pipes Provider: Could not open a connection to SQL Server [53]. ".
    Process Provider
    Slowly Changing Dimension [212]
    Then i opened Provider package in SSDT and changed the source reading record limit from 4,00,000 to 15,000 in source query and deployed again and run, then the job succeeded. more than 15,000 failed.
    And in the 2nd experiment, I removed slowly changing dimension task and implemented normal lookup for insert/update, and set the source reading limit again to 4,00,000 and deployed again and run, then the job succeeded.
    Now i am not able to figure out, what exactly is the problem with Slowly changing dimension task for more than 15,00 records in SQL Server  Agent Job run?
    Can anybody pls help me out.
    Thanks
    Bikram

    Hi Vikash,
    As i have mentioned in the above post, below 2 scenarios: 
    "Then i opened Provider package in SSDT and changed the source reading record limit from 4,00,000 to 15,000 in source
    query and deployed again and run, then the job succeeded. more than 15,000 failed.
    And in the 2nd experiment, I removed slowly changing dimension task and implemented normal lookup for insert/update, and set the source reading limit again to 4,00,000 and deployed again and run, then the job succeeded."
    That means i am able to connect to sql server.
    But if i change the 1st scenario and read 4,00,000 records, the job fails and shows the above mentioned error.
    Similarly in the 2nd scenario, if i implement SCD look up,  the job fails and shows the above mentioned error.
    And i am consistently reproducing this.
    Thanks
    Bikram

  • Error trying to run SSIS Package via SQL Server Agent: DTExec: Could not set \Package.Variables[User::VarObjectDataSet].Properties[Value] value to System.Object

    Situation:
    SSIS Package designed in SQL Server 2012 - SQL Server Data Tools
    Windows 7 - 64 bit.
    The package (32 bit) extracts data from a SQL Server db to an Excel Output file, via an OLE DB connection.
    It uses 3 package variables:
    *) SQLCommand (String) to specify the SQL Statement to be executed by the package
    Property path: \Package.Variables[User::ExcelOutputFile].Properties[Value]
    Value: f:\Output Data.xls
    *) EXCELOutputFIle (String) to specify path and filename of the Excel output file
    Property path: \Package.Variables[User::SQLCommand].Properties[Value]
    Value: select * from CartOrder
    *) VarObjectDataSet (Object) to hold the data returned by SQL Server)
    Property path: \Package.Variables[User::VarObjectDataSet].Properties[Value]
    Value: System.Object
    It consists out of 2 components:
    *) Execute SQL Task: executes the SQL Statement passed on via a package variable. The resultng rows are stored in the package variable VarObjectDataSet
    *) Script Task: creates the physical output file and iterates VarObjectDataSet to populate the Excel file.
    Outcome and issue:The package runs perfectly fine both in SQL Server Data Tools itself and in DTEXECUI.
    However, whenever I run it via SQL Server Agent (with 32 bit runtime option set), it returns the errror message below.
    This package contains 3 package variables but the error stating that a package variable can not be set, pops up for the VarObjectDataSet only.  This makes me wonder if it is uberhaupt possible to set the value of a package variable
    of type Object.
    Can anybody help me on this please ?
    Message
    Executed as user: NT Service\SQLSERVERAGENT. Microsoft (R) SQL Server Execute Package Utility  Version 11.0.2100.60 for 32-bit  Copyright (C) Microsoft Corporation. All rights reserved.    Started:  6:40:20 PM  DTExec: Could
    not set \Package.Variables[User::VarObjectDataSet].Properties[Value] value to System.Object.  Started:  6:40:20 PM  Finished: 6:40:21 PM  Elapsed:  0.281 seconds.  The package execution failed.  The step failed.
    Thank you very much in advance
    Jurgen

    Hi Visakh,
    thank you for your reply.
    So, judging by your reply, not all package variables used inside a package need to be set a value for when run in DTEXEC ?
    I already tried that but my package ended up in error (something to do with "... invocation ...." and that error is anything but clearly documented. Judging by the error message itself, it looks like it could be just about anything. that is why I asked my
    first question about the object type package variable.
    Now, I will remove it from the 'set values' list and try another go cracking the unclear error-message " ... invocation ...". Does an error message about " ... invocation ..." ring any bells, now that we are talking about it here ?
    Thx in advance
    Jurgen
    Yes exactly
    You need to set values only forthem which needs to be controlled from outside the package
    Any variable which gets its value through expression set inside package or through a query inside execute sql task/script task can be ignored from DTExec
    Ok I've seen the invocation error mostly inside script task. This may be because some error inside script written in script task. If it appeared after you removed the variable then it may because some reference of variable existing within script task.
    Please Mark This As Answer if it helps to solve the issue Visakh ---------------------------- http://visakhm.blogspot.com/ https://www.facebook.com/VmBlogs

  • SQL SERVER AGENT JOB ERROR - SSIS PACKAGE

    Hi , 
    I have a SQL server agent job which runs SSIS package as the daily job. The SSIS package contains multiple child package. Its a master package which calls other SSIS package. The master package calls 23 SSIS packages, few of the packages runs in parallel.
    I am getting the below 2 different errors more frequently. It fails only in the production server, I scheduled the job in UAT server, it did not fail. Also when we run the master package with out sql agent job, it did not fail. 
    Error 1 :
    R6025  - pure virtual function call.  The return value was unknown.  The process exit code was 255.  The step failed.
    Error 2 : The step did not generate any output.  The return value was unknown.  The process exit code was -1073741819.  The step failed.
    We tried browsing for the answers ,no luck. It failing in live , so we need to run the package manually in live server every time. 
    Please help me to resolve this issue. Thanks in advance.
    Regards, 
    Dhivya Sivakumar

    Hi Vijeth, 
    Thanks for your reply. 
    1) Run the Package manually and check whether it runs successfully.  -
    No Failures. Package completed succesfully
    2) If Step 1 is successful,
    a) Point the same package to the UAT database and run it and check whether it runs successfully or not. -
    We tried to schedule the package almost for 1 month. No failures in UAT. 
    b) In UAT database, point to the Production database and run the package. - I am not sure, if i can do this.I will try and let you know the result.
         These steps will help us identify whether the problems lies within the package or the Environment. 
    3) Run the Package manually in production Environment using dtexec utilily. -
    No Failures. Success.
    4) Check the ID used to run the SQL Agent job and modify to an account with elevated permissions or GRANT more permissions to the existing ID. -
    The account used currently is having all the privileges. Its the most powerful user in live DB. 
    Regards, 
    Dhivya S

  • Memory error when executing package through SQL Server Agent.

    Hi!!
    I have a problem with a package (SSIS) when run on SQL Server Agent.
    The job is configured
    with the proxy and the account has the
    required privileges. Runs perfectly
    if the job runs manually, but if I let it
    run on schedule I get a memory error.
    Also if I run the
    package through DTExec.exe or VS2008,
    everything runs smoothly.
    I am using SQL2008R2.
    If someone has something similar happened
    and have found how to fix it please i need
    to know how.
    Thank you.

    This is most likely your issue:
    http://support.microsoft.com/kb/824422

  • SSIS package give an error if execute through SQL server agent

    I have created a SSIS package in BIDS 2012. If i execute this package through sql server agent it gives the below error:
    Executed as user: NT Service\SQLSERVERAGENT. Microsoft (R) SQL Server Execute Package Utility  Version 11.0.2100.60 for 64-bit  Copyright (C) Microsoft Corporation. All rights reserved.    Started:  11:19:47 AM  Error: 2015-01-20
    11:19:47.83     Code: 0xC0016016     Source: Sub_Hadoop_aggregation      Description: Failed to decrypt protected XML node "DTS:Password" with error 0x8009000B "Key not valid for use in specified state.".
    You may not be authorized to access this information. This error occurs when there is a cryptographic error. Verify that the correct key is available.  End Error  Error: 2015-01-20 11:19:47.94     Code: 0xC0016016     Source:
    Sub_Hadoop_aggregation      Description: Failed to decrypt protected XML node "DTS:Password" with error 0x8009000B "Key not valid for use in specified state.". You may not be authorized to access this information. This error
    occurs when there is a cryptographic error. Verify that the correct key is available.  End Error  Error: 2015-01-20 11:19:48.04     Code: 0xC0016016     Source: Sub_Hadoop_aggregation      Description: Failed to
    decrypt protected XML node "DTS:Password" with error 0x8009000B "Key not valid for use in specified state.". You may not be authorized to access this information. This error occurs when there is a cryptographic error. Verify that the correct
    key is available.  End Error  Error: 2015-01-20 11:19:48.92     Code: 0xC00291EC     Source: alter_keys Execute SQL Task     Description: Failed to acquire connection "mstr_warehouse". Connection may not be
    configured correctly or you may not have the right permissions on this connection.  End Error  DTExec: The package execution returned DTSER_FAILURE (1).  Started:  11:19:47 AM  Finished: 11:19:48 AM  Elapsed:  1.42 seconds.
     The package execution failed.  The step failed.
    so i have change some properties in our package like protectionlevel change from encrypted to dontsavesensitive. After that i have created configuration file for the package and use that configuration file. It executes the package through sql server agent
    smoothly.
    Thanks
    Azhar Khan

    Hi selfdestruct80,
    According to your description, you created SSIS package and it works fine. But you got the error message when the SSIS package was called from a SQL Server Agent job.
    According to my knowledge, the package may not run in the following scenarios:
    The current user cannot decrypt secrets from the package.
    A SQL Server connection that uses integrated security fails because the current user does not have the required permissions.
    File access fails because the current user does not have the required permissions to write to the file share that the connection manager accesses.
    A registry-based SSIS package configuration uses the HKEY_CURRENT_USER registry keys. The HKEY_CURRENT_USER registry keys are user-specific.
    A task or a connection manager requires that the current user account has correct permissions.
    According to the error message, the SSIS Package ProtectionLevel property to EncryptSensitiveWithPassword as ArthurZ mentioned. To solve the problem, you need to go to Command Line tab, manually specify the paassword in SQL Agent Job with the command like below:
    /FILE "\"C:\Users\xxxx\Documents\SQL Server Management Studio\SSIS\Package.dtsx\"" /DECRYPT somepassword /CHECKPOINTING OFF /REPORTING E
    If you have any more questions, please feel free to ask.
    Thanks,
    Wendy Fu
    Wendy Fu
    TechNet Community Support

  • SQL Server Agent Log showing errors [298] SQLServer Error: 10061, A network-related or instance-specific error has occurred while establishing a connection to SQL Server. Server is not found or not accessible. Check if instance name is correct and if SQL

    Hi All,
    I have started receiving this error in the logs for the last 10 days and the Schedules Jobs for the database have stopped running. My MS CRM application is working fine.
    Can anyone guide me what could be the problem.
    Date                      17/4/2014 2:04:20 PM
    Log                         SQL Server Agent (Current - 17/4/2014 2:01:00 PM)
    Message
    [298] SQLServer Error: 10061,
    A network-related or instance-specific error has occurred while establishing a connection to SQL Server. Server is not found or not accessible. Check if instance name is correct
    and if SQL Server is configured to allow remote connections. For more information see SQL Server Books Online. [SQLSTATE 08001]
    Date                      17/4/2014 2:11:55 PM
    Log                         SQL Server Agent (Current - 17/4/2014 2:01:00 PM)
    Message
    [298] SQLServer Error: 10061,
    A network-related or instance-specific error
    has occurred while establishing a connection to SQL Server. Server is not found or not accessible. Check if instance name is correct and if SQL Server is configured to allow remote connections. For more information
    see SQL Server Books Online. [SQLSTATE 08001]
    Date                      7/4/2014 11:00:31 AM
    Log                         SQL Server Agent (Current - 17/4/2014 2:01:00 PM)
    Message
    [298] SQLServer Error: 10061,
    A network-related or instance-specific error
    has occurred while establishing a connection to SQL Server. Server is not found or not accessible. Check if instance name is correct and if SQL Server is configured to allow remote connections. For more information
    see SQL Server Books Online. [SQLSTATE 08001]

    Check this link
    http://social.msdn.microsoft.com/Forums/en-US/906da9b5-2482-468c-a424-ae099da2d96b/sql-server-agent-service-account-error?forum=sqlsetupandupgrade
    Regards, RSingh

  • Getting an error running an SSIS package from SQL server agent

    This is the first time I'm running an SSIS package in SQL server agent.
    I'm running a SQL server agent job and getting this error message:
    Am I using the correct options? (options list below)
    Message
    Executed as user: SITEX\stxdatasqlexec. Microsoft (R) SQL Server Execute Package Utility  Version 10.50.1600.1 for 32-bit  Copyright (C) Microsoft Corporation 2010. All rights reserved.    Started:  1:42:00 PM  Error: 2014-04-17
    13:42:01.01     Code: 0xC0011007     Source: {B72BF421-785A-44EC-9570-D2A40B046CA7}      Description: Unable to load the package as XML because of package does not have a valid XML format. A
    specific XML parser error will be posted.  End Error  Error: 2014-04-17 13:42:01.02     Code: 0xC0011002     Source: {B72BF421-785A-44EC-9570-D2A40B046CA7}      Description: Failed
    to open package file "C:\Users\halexandrovich\Documents\Nbr_Rolls_base.dtsx" due to error 0x80070003 "The system cannot find the path specified.".  This happens when loading a package and the file cannot be opened or loaded correctly
    into the XML document. This can be the result of either providing an incorrect file name was specified when calling LoadPackage or the XML file was specified and has an incorrect format.  End Error  Could not load package "C:\Users\halexandrovich\Documents\Nbr_Rolls_base.dtsx"
    because of error 0xC0011002.  Description: Failed to open package file "C:\Users\halexandrovich\Documents\Nbr_Rolls_base.dtsx" due to error 0x80070003 "The system cannot find the path specified.".  This happens when loading a
    package and the file cannot be opened or loaded correctly into the XML document. This can be the result of either providing an incorrect file name was specified when calling LoadPackage or the XML file was specified and has an incorrect format.  Source:
    {B72BF421-785A-44EC-9570-D2A40B046CA7}  Started:  1:42:00 PM  Finished: 1:42:01 PM  Elapsed:  0.047 seconds.  The package could not be found.  The step failed.
    Here are the options I'm using:
    package source - file system
    data source  destination = my SQL server db
    execution option - use 32 bit runtime
    command line entry:
    - /FILE "C:\Users\halexandrovich\Documents\Nbr_Rolls_base.dtsx"  /CONNECTION DestinationConnectionOLEDB;"\"Data Source=esxdspr-sql01.sitex.com;Initial Catalog=SuesTbls;Provider=SQLNCLI10;Integrated Security=SSPI;Auto Translate=false;\""
    /CONNECTION SourceConnectionFlatFile;"\\sitex.com\dfs\Production\SFTPData\LPSEFTProcess\FromAADFS\Rpt_Nbr_Rollsperbatch_20140331_20_0.txt"
    /X86  /CHECKPOINTING OFF /REPORTING E
    I checked the filename so it must be the XML format it's complaining about.

    Thank you, pituach.
    I tried running the package using just my c drive without partition, C:\Nbr_Rolls.dtsx, but still getting the same
    error. I do not see any option on this site to post my package. I know it's not the path that's the issue. Our support desk already fixed that because I was getting a different message before.
    Message
    Executed as user: SITEX\stxdatasqlexec. Microsoft (R) SQL Server Execute Package Utility  Version 10.50.1600.1 for 32-bit  Copyright (C) Microsoft Corporation 2010. All rights reserved.    Started:  11:23:00 AM  Error: 2014-04-18
    11:23:00.44     Code: 0xC0011007     Source: {2BEE62EB-DD08-4867-9F5C-660167964650}      Description: Unable to load the package as XML because of package does not have a valid XML format. A
    specific XML parser error will be posted.  End Error  Error: 2014-04-18 11:23:00.45     Code: 0xC0011002     Source: {2BEE62EB-DD08-4867-9F5C-660167964650}      Description: Failed
    to open package file "C:\Nbr_Rolls.dtsx" due to error 0x800C0006 "The system cannot locate the object specified.".  This happens when loading a package and the file cannot be opened or loaded correctly into the XML document. This can be the result of
    either providing an incorrect file name was specified when calling LoadPackage or the XML file was specified and has an incorrect format.  End Error  Could not load package "C:\Nbr_Rolls.dtsx" because of error 0xC0011002.  Description: Failed
    to open package file "C:\Nbr_Rolls.dtsx" due to error 0x800C0006 "The system cannot locate the object specified.".  This happens when loading a package and the file cannot be opened or loaded correctly into the XML document. This can be the result of
    either providing an incorrect file name was specified when calling LoadPackage or the XML file was specified and has an incorrect format.  Source: {2BEE62EB-DD08-4867-9F5C-660167964650}  Started:  11:23:00 AM  Finished: 11:23:00 AM 
    Elapsed:  0.125 seconds.  The package could not be found.  The step failed.

Maybe you are looking for