SQL Server Agent Job Duration monitor alerts incorrectly

As per SQL Server MP guide, changes in Dec 2007 update : Fixed a script that was resulting in invalid alerts being generated from the agent job's Job Duration monitor.
In my SCOM 2012 environment on few SQL servers I'm getting an alert from Job Duration monitor for SQL jobs that have completed well within the defined thresholds. Interestingly this monitor then resets on its own(The monitor has been initialized for
the first time or it has exited maintenance mode) and immediately turns critical again. I do not see any pattern around these state changes. These are weekly jobs, however the Job Duration monitor continues to alert for these specific jobs 10-15 times a day.
This is creating unnecessary noise in the environment.
Is anyone else facing this issue? I know I can disable this default monitor and create my own monitor. However I want to check if this is a known bug in this SQL MP(version 6.4.1.0).
Note : I'm aware about an updated MP version 6.5.1.0, however the release note doesn't specify if it fixes this issue.
Thanks,
Harry
Thanks, Harry :-)

Resolution: The issue was that the SCOM Agent was getting restarted repeatedly. Post restart health calculation was done again and the SQL Job duration monitors would reset and generate new alerts.
There is a recovery configured in an aggregate monitor to restart the SCOM Agent if Handle Count/Private Bytes of Health Service/Monitoring Host breach a set threshold. I had to create an override to change the thresholds for all Health Service/Monitoring
Host and exclude the recovery on Physical servers.
If there are large number of workflow on an SCOM Agent due to multiple MP(SQL, HP, etc.), the increase in Handle Count/Private Bytes is usual.
Thanks, Harry :-)

Similar Messages

SSIS Package Fails when Scheduled as a SQL Server Agent Job

I have an SSIS package that runs without any problems when executed through BIDS.
However, when I schedule the SSIS as an Agent job, it fails completely or part way through. When it partially runs, the part that it is failing on is a Script Task that moves the source data file to an archive folder (on the same server).
I have tried using my domain account as the owner of the job, then the job fails straight off and I get an error:
Unable to determine if the owner (Domain\MyID) of job JobName has server access (reason: Could not obtain information about Windows NT group/user 'Domain\MyID'
If I change the owner to the 'sa' account , then the job partially runs, but then fails because 'sa' is a SQL account and does not have access to the filesystem.
I have managed to get it to work by using the SQL2008_Local account and granting modify permissions to the affected folders.
My question is - what is the advised way of doing this?
Thanks
Gary

Hi Garyv.King,
When you see a SSIS package fails running in a SQL Agent job, you need to first consider the following conditions:
1. The user account that is used to run the package under SQL Server Agent differs from the original package author.
2. The user account does not have the required permissions to make connections or to access resources outside the SSIS package.
For more detailed information about the issue, please following this KB article:
An SSIS package does not run when you call the SSIS package from a SQL Server Agent job step
http://support.microsoft.com/kb/918760
You can check SQL Server Agent’s activity logs, Windows Event logs and SSIS logs to get more clues. Also the tool Process Monitor is helpful to track the cause of registry or file access related issues.
The following 4 issues are common encountered in the SSIS forum.
1. The package's Protection Level is set to EncryptSensitiveWithUserKey but your SQL Server Agent service account is different from the SSIS package creator.
2. Data source connection issue.
3. File or registry access permission issue.
4. No 64-bit driver issue.
For more information about it, please see:
How do I troubleshoot SSIS packages failed execution in a SQL Agent job:
http://social.technet.microsoft.com/Forums/en-US/sqlintegrationservices/thread/e13c137c-1535-4475-8c2f-c7e6e7d125fc
Thanks,
Eileen

SQL Server Agent Job Failing on Job Step

Hi,
Firstly, apologies if this post has been made in the wrong group. Running SQL Server 2012. I'm attempting to add a SQL Server Agent Job which calls a stored procedure that sends a Database Mail message. The SQL Server and SQL Server Agent
both run under the NT AUTHORITY\NETWORK SERVICE account. The Database Mail service has been enabled, and a public profile created. When running the stored procedure manually, I receive no errors - everything runs as expected and I do receive an
email containing the expected information.
I've created the job, job step, job schedule, attached the schedule to the job, and assigned the job to server, all using T-SQL without error. I've also enabled the mail profile on the SQL Server Agent, and I know that part is working because when
the job fails, I get an email notification of the failure.
I've checked the command text in the job step and parsed it within the SQL Job Step Edit window to confirm, it shows as parsing correctly. However, when I manually run the job itself, I get the following:
Execution of job failed. See the history log for details.
I check the history log and it shows:
[474] Unable to refresh Database Mail profile Database Mail Profile. (reason: ) (Not a typo, the history log shows no reason)
[260] Unable to start mail session.
[396] An idle CPU condition has not been defined - OnIdle job schedules will have no effect
The command text on the failing job step is as follows:
DECLARE @date [varchar](10)
SET @date = CAST(GETDATE() AS [varchar](10))
EXEC [dbo].[GetExceptions]
@company = 'MyCompany',
@checkDate = @date
With regard to the date value being passed as varchar: This stored procedure is used to check for exceptions against multiple databases on this server (hence the company parameter) via dynamic SQL. I'd much prefer to use proper data typing but this
is the only way I could get it to work.
Does anyone have any suggestions on anything else I could check, or insights into why this is failing? Any help is greatly appreciated!
Best Regards
Brad

I am not sure if this really helps but I would do follow the below steps:
1. make sure sql server agent has database mail enabled(rigt click on server agent--properties--alert system--enable database mail and choose right profile.) and RESTART THE SQL SERVER AGENT.(i know you said it i working, but sometimes, restart the
sql server agent might fix)
2. check agent error log and check if any error messages.
3. run the command text you mentioned in sql server and see if it is working.(i know you said it is working but just to make sure).
4. make sure sql server agent service user has permissions to run database mail in msdb. check this https://msdn.microsoft.com/en-us/library/ms186358.aspx
5. Check the output from select * from msdb.dbo.sysmail_log and if it says anything
6.it does not look like the job log is getting truncated but to make sure, get the job step output to a text file.to do this, edit the job step and on the job step properties click on advanced, enter path to the output file. this will give the complete
output for the step.
Hope it Helps!!

Sql server agent job with SSIS

Hello Experts
i have a sql server agent job that has four steps in tsql,ssis,tsql and tsql orders. the job run automatically every night and i copy paste the error message right here, any ideas please:
Date
1/27/2014 7:30:00 AM
Log
Job History (test [Mon-Fri AM])
Step ID
1
Server
server1
Job Name
name [Mon-Fri AM]
Step Name
step one
Duration
00:34:33
Sql Severity
0
Sql Message ID
0
Operator Emailed
Operator Net sent
Operator Paged
Retries Attempted
0
Message
Executed as user x\serveragent. The step was cancelled (stopped) as the result of a stop job request.

you can try default trace / event viewer to check if there is any entry on same .
How to read default trace in sql server
Thanks Saurabh Sinha
http://saurabhsinhainblogs.blogspot.in/
Please click the Mark as answer button and vote as helpful
if this reply solves your problem

What SQL Server Agent jobs are currently running and for how long

Is there a way to tell what SQL Server Agent jobs are currently running and for how long? View history isn't working in my case because it's only showing completed jobs. John Schroeder

You can use the "Job Activity Monitor" for doing this. Do the following steps. It will open up the Job Activity Monitor.
1.    In Object Explorer, connect to an instance of the SQL Server Database Engine, and then expand that instance.
2.    Expand SQL Server Agent.
3.    Right-click Job Activity Monitor and click View Job Activity.
4.    In the Job Activity Monitor, you can view details about each job that is defined for this server.
In Job Activity Monitor page, we have column called Status. It will indicate whether job is executing or idle. Last Run column will give you the last invocation time of this job.
Use the following link for further reference.
http://msdn.microsoft.com/en-us/library/ms187449.aspx
Thanks,
Sateesh.
Mark Post as helpful if it provides any help.Otherwise,leave it as it is.

One sql server agent job suspend

One sql server agent job--run full backup of one database is suspended from activity monitor.
How to find why it is suspended and troubleshoot?

"Suspended" is a common status for a thread. It indicates the thread is waiting on an external resource, which backups often are
Check few things:
1. Database size, how much backup is completed from below command and location where backup files are being placed
select session_id,command, percent_complete
from sys.dm_exec_requests
If that on network than might be due to slow netword backup take some time.
2. Check job history, expected
completion time of backup job and also if any change in the I/O and CPU time for the SPID
3.Check wait type of suspended spid, SQL server and event viewer logs. If any I/O issue on the server. Like disk responding slowly that might be a cause of delay.
Please click the Mark as answer button and vote as helpful if this reply solves your problem

While i am trying to start the sql server agent job getting the error

Hi,
when ever i am trying to executing the sql server agent job's through manual that time i am getting the below error.

Hi,
when ever i am trying to executing the sql server agent job's through manual that time i am getting the below error.
I searched net for this type of error and found that Latest SP can fix this issue.See below link
http://social.msdn.microsoft.com/Forums/sqlserver/en-US/12181324-bc51-41a5-a8a5-608bfe2725e9/could-not-load-type-smoagentjobbasecollection?forum=sqlsmoanddmo
Can you also refer to this link
http://www.sqldbadiaries.com/2010/12/20/could-not-load-file-or-assembly-error-while-using-tdp-makes-a-come-back/
Also please see this connect also
http://connect.microsoft.com/SQLServer/feedback/details/280907/sql-agent-job-actions-fail-from-job-activity-monitor
hope this helps
Please mark this reply as the answer or vote as helpful, as appropriate, to make it useful for other readers

Error While executing a SSIS package which contains a script task through SQL Server Agent job

Hi,
I have a SQL Server 2012 SSIS package with a script task along with other tasks [data flow, execute sql tasks ]. When I manually executed the job through BIDS, its completed successfully.
Then I have automated the execution of the package through SQL Server Agent Job. But when I executed the package through SQL Agent job, it runs successfully for all the tasks except script task. When it comes to execute the Script Task, it is getting failed
with the below error message.
"Error: 2012-08-29 12:45:14.67
Code: 0x00000001
Source: Script Task
Description: Exception has been thrown by the target of an invocation.
End Error
DTExec: The package execution returned DTSER_FAILURE (1).
Started: 12:45:10 PM
Finished: 12:45:14 PM
Elapsed: 4.353 seconds
I have installed the SSIS on the 64-bit environment and SSIS service is running. Also I tried to run the job through 32 bit [job option] but I am getting the above error in all cases.
Any help will be greatly appreaciated !
Thanks,
Navin
- naveen.reddy

Hi Arthur,
My script task access the excel files in a network share, refresh them all and save them. When I execute the ETL manually or thru DTEXEC, it is executing successfully. I am facing the issue when I am executing thru SQL Agent Job only. Logging also showing
the same error.
"Error: 2012-08-23 12:45:14.67
Code: 0x00000001
Source: Script Task
Description: Exception has been thrown by the target of an invocation.
End Error
DTExec: The package execution returned DTSER_FAILURE (1).
Started: 12:45:10 PM
Finished: 12:45:14 PM
Elapsed: 4.353 seconds
- naveen.reddy

Error while executing SSIS package which contains Script component through SQL Server Agent Job

Hello All,
I have written one SSIS 2012 package which is fetching records from CSV and put it into staging DB and from staging DB , using SSIS script component task, I am inserting data into Dynamics CRM. So far it is working fine when
I manually execute SSIS package.
but when I run the SSIS package using SQL server agent job, I encounter below error. After seeing below error at step "Insert TLM Headers Script Component " I understand that it is failing at script component which I have used in SSIS package,
but I am not sure what is the cause behind that? please advise.
Error:
Executed as user: domain\user account. Microsoft (R) SQL Server Execute Package Utility Version 11.0.5556.0 for 64-bit Copyright (C) Microsoft Corporation. All rights reserved.    Started: 1:21:41 PM Error: 2015-02-25
13:21:45.94     Code: 0xC0047062     Source: Insert TLM Headers Script Component [205]     Description: System.ServiceModel.FaultException: The server was unable to process the request due to an internal
error. For more information about the error, either turn on IncludeExceptionDetailInFaults (either from ServiceBehaviorAttribute or from the <serviceDebug> configuration behavior) on the server in order to send the exception information back to
the client, or turn on tracing as per the Microsoft .NET Framework 3.0 SDK documentation and inspect the server trace logs.    Server stack trace:      at System.ServiceModel.Channels.ServiceChannel.ThrowIfFaultUnderstood(Message
reply, MessageFault fault, String action, MessageVersion version, FaultConverter faultConverter)     at System.ServiceModel.Channels.ServiceChannel.HandleReply(ProxyOperationRuntime operation, ProxyRpc& rpc)
at System.ServiceModel.Channels.ServiceChannel.Call(String action, Boolean oneway, ProxyOperationRuntime operation, Object[] ins, Object[] outs, TimeSpan timeout)     at System.ServiceModel.Channels.ServiceChannelProxy.InvokeService(IMethodCallMessage
methodCall, ProxyOperationRuntime operation)     at System.ServiceModel.Channels.ServiceChannelProxy.Invoke(IMessage message)    Exception rethrown at [0]:      at Microsoft.SqlServer.Dts.Pipeline.ScriptComponentHost.HandleUserException(Exception
e)    at Microsoft.SqlServer.Dts.Pipeline.ScriptComponentHost.ProcessInput(Int32 inputID, PipelineBuffer buffer)     at Microsoft.SqlServer.Dts.Pipeline.ManagedComponentHost.HostProcessInput(IDTSManagedComponentWrapper100
wrapper, Int32 inputID, IDTSBuffer100 pDTSBuffer, IntPtr bufferWirePacket) End Error Error: 2015-02-25 13:21:45.94     Code: 0xC0047022     Source: Insert TLM Headers SSIS.Pipeline
Description: SSIS Error Code DTS_E_PROCESSINPUTFAILED. The ProcessInput method on component "Script Component" (205) failed with error code 0x80131501 while processing input "Input 0" (215). The identified component returned an error
from the ProcessInput method. The error is specific to the component, but the error is fatal and will cause the Data Flow task to stop running. There may be error messages posted before this with more information about the failure. End Error
DTExec: The package execution returned DTSER_FAILURE (1). Started: 1:21:41 PM Finished: 1:21:45 PM Elapsed: 4.009 seconds. The package execution failed. The step failed.
Thanks
Pankaj

domain\user account has not proper rights
That being said, often SSIS jobs require a proxy to be runnable and this is how you make one up
http://www.mssqltips.com/sqlservertip/2163/running-a-ssis-package-from-sql-server-agent-using-a-proxy-account/
Arthur
MyBlog
Twitter

Error: Failed to acquire connection while exporting a file using SSIS package through SQl Server Agent job.

Hi Team,
I am running a sql server job which is loading data to a sharepoint document library.File is an excel format and is getting loaded
when executed through SSDT solution .But when i am using an SQL Agent job to pick up the file it doesnt get the path and agent job fails with the error "Failed to acquire connection".I have deployed the SSIS Package through SQL Server 2012 deployment
methodologies.
I am not able to trace the error of loading data from a sharepoint library.library. Sql agent jobs works fine when i give local path.The
account which is running the sql agent job is the same who has access to document library.I also tried to run the job through proxy account. I am using a xml configuraion to store my credentials.I am able to palce the same file to a network drive in the same
server through sql server agent job. The only problem is when I am trying to load the file to a sharepoint folder.
Thanks,
Arsa..

Is that the WebDAV method that you are suggesting here to map the n/w drive?
Its kind of webdav but you will be using windows nw drive to store data
yes, I am able to create the file to D: , but didn't check with the C:.
Try with c:, as c: require special permisssions
If this helped you resolve your issue, please mark it Answered

SQL Server Agent Jobs error for Slowly changing dimension

Hi,
I have implemented Slowly changing dimension in 5 of my packages for lookup insert/update.
All the packages are running good in SSDT. And when i deployed the project to SSISDB and run the packages all are running successfully. But when i created a job out of that and run the packages, then 3 packages ran successfully and 2 packages failed.
When i opened All Execution Report. I found the following error:
Message
Message Source Name
Subcomponent Name
Process Provider:Error: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80004005. An OLE DB record is available. Source: "Microsoft SQL Server Native Client 10.0" Hresult: 0x80004005 Description:
"Login timeout expired". An OLE DB record is available. Source: "Microsoft SQL Server Native Client 10.0" Hresult: 0x80004005 Description: "A network-related or instance-specific error has occurred while establishing
a connection to SQL Server. Server is not found or not accessible. Check if instance name is correct and if SQL Server is configured to allow remote connections. For more information see SQL Server Books Online.". An OLE DB record is available.
Source: "Microsoft SQL Server Native Client 10.0" Hresult: 0x80004005 Description: "Named Pipes Provider: Could not open a connection to SQL Server [53]. ".
Process Provider
Slowly Changing Dimension [212]
Then i opened Provider package in SSDT and changed the source reading record limit from 4,00,000 to 15,000 in source query and deployed again and run, then the job succeeded. more than 15,000 failed.
And in the 2nd experiment, I removed slowly changing dimension task and implemented normal lookup for insert/update, and set the source reading limit again to 4,00,000 and deployed again and run, then the job succeeded.
Now i am not able to figure out, what exactly is the problem with Slowly changing dimension task for more than 15,00 records in SQL Server Agent Job run?
Can anybody pls help me out.
Thanks
Bikram

Hi Vikash,
As i have mentioned in the above post, below 2 scenarios:
"Then i opened Provider package in SSDT and changed the source reading record limit from 4,00,000 to 15,000 in source
query and deployed again and run, then the job succeeded. more than 15,000 failed.
And in the 2nd experiment, I removed slowly changing dimension task and implemented normal lookup for insert/update, and set the source reading limit again to 4,00,000 and deployed again and run, then the job succeeded."
That means i am able to connect to sql server.
But if i change the 1st scenario and read 4,00,000 records, the job fails and shows the above mentioned error.
Similarly in the 2nd scenario, if i implement SCD look up, the job fails and shows the above mentioned error.
And i am consistently reproducing this.
Thanks
Bikram

SQL SERVER AGENT JOB ERROR - SSIS PACKAGE

Hi ,
I have a SQL server agent job which runs SSIS package as the daily job. The SSIS package contains multiple child package. Its a master package which calls other SSIS package. The master package calls 23 SSIS packages, few of the packages runs in parallel.
I am getting the below 2 different errors more frequently. It fails only in the production server, I scheduled the job in UAT server, it did not fail. Also when we run the master package with out sql agent job, it did not fail.
Error 1 :
R6025 - pure virtual function call. The return value was unknown. The process exit code was 255. The step failed.
Error 2 : The step did not generate any output. The return value was unknown. The process exit code was -1073741819. The step failed.
We tried browsing for the answers ,no luck. It failing in live , so we need to run the package manually in live server every time.
Please help me to resolve this issue. Thanks in advance.
Regards,
Dhivya Sivakumar

Hi Vijeth,
Thanks for your reply.
1) Run the Package manually and check whether it runs successfully. -
No Failures. Package completed succesfully
2) If Step 1 is successful,
a) Point the same package to the UAT database and run it and check whether it runs successfully or not. -
We tried to schedule the package almost for 1 month. No failures in UAT.
b) In UAT database, point to the Production database and run the package. - I am not sure, if i can do this.I will try and let you know the result.
These steps will help us identify whether the problems lies within the package or the Environment.
3) Run the Package manually in production Environment using dtexec utilily. -
No Failures. Success.
4) Check the ID used to run the SQL Agent job and modify to an account with elevated permissions or GRANT more permissions to the existing ID. -
The account used currently is having all the privileges. Its the most powerful user in live DB.
Regards,
Dhivya S

Excel Import Fails in SQL Server Agent Job but not when executed in BIDS

We have a SQL Server agent job that has ran successfully for the past 6 months. It started failing about a week ago. I don't believe anyone installed anything on the server. The proxy account used to run the job is an admin on the server.
I've tried everything I can think of or that I found on searches. I even changed the connection manager from an Excel source to using an Microsoft office 12.0 Access Database Engine OLEDB connection and it still runs in BIDs and not as an agent job.
I also setup my LANID as a proxy account to see if the job would run (checking security) -- and it fails with the same error.   I also made sure the path is
\\server\share rather than a drive letter. Any ideas?
The package is executed in 32 bit mode. The package still runs fine in BIDS (where BIDs is opened on the server) but fails in the SQL Agent job with:
Executed as user: xxxxxx\xxxxxx. Microsoft (R) SQL Server Execute Package Utility Version 11.0.2100.60 for 32-bit Copyright (C) Microsoft Corporation. All rights reserved.    Started: 9:00:00 AM Error: 2014-12-01 09:00:02.46
Code: 0xC0202009     Source: xxxxxx Connection manager "Excel Connection Manager"     Description: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80004005. An OLE
DB record is available. Source: "Microsoft Access Database Engine" Hresult: 0x80004005 Description: "External table is not in the expected format.". End Error Error: 2014-12-01 09:00:02.65
Code: 0xC020801C     Source: Load File to Staging Excel Source [43]     Description: SSIS Error Code DTS_E_CANNOTACQUIRECONNECTIONFROMCONNECTIONMANAGER. The AcquireConnection method call to the connection manager
"Excel Connection Manager" failed with error code 0xC0202009. There may be error messages posted before this with more information on why the AcquireConnection method call failed. End Error Error: 2014-12-01 09:00:02.77
Code: 0xC0047017     Source: Load File to Staging SSIS.Pipeline     Description: Excel Source failed validation and returned error code 0xC020801C. End Error Error: 2014-12-01 09:00:02.90
Code: 0xC004700C     Source: Load File to Staging SSIS.Pipeline     Description: One or more component failed validation. End Error Error: 2014-12-01 09:00:03.02     Code: 0xC0024107
Source: Load File to Staging      Description: There were errors during task validation. End Error DTExec: The package execution returned DTSER_FAILURE (1). Started: 9:00:00 AM Finished: 9:00:03 AM
Elapsed: 2.761 seconds. The package execution failed. The step failed.

I logged on to the server with the account that the SQL Agent runs under and ran the following from a command
line to execute the package:
"D:\Program Files (x86)\Microsoft SQL Server\110\DTS\Binn\DTEXEC.exe" /FILE
"\"K:\SSIS\xxxxxx\xxxxx.dtsx\"" /CHECKPOINTING OFF
/REPORTING EWCDI /X86
I wanted to see if it was a security issue with the agent account account - but
this ran fine.
I then updated the SQL Agent job to use an operating system command instead
of a SSIS package on the job step. This fails...
The issue is definately with the SQL Server Agent

Will dynamic Excel commands in a C# Edit Script run ok as a SSISDB Package and a SQL Server Agent Job?

I've seen some conflicting things in terms of dynamic Excel commands running in a SSISDB Package and a scheduled SQL Server Agent Job...things like that it's not supported...that it won't work...etc...
It's a pretty simple script...to open up a .xlsx file and save it as a .xls file. I am trying to be proactive here and the reason I did it this way is because I could not source the .xlsx file and then I couldn't use OLE DB sourcing because I think the .xlsx
file wants you to use Microsoft.ACE.OLEDB.12.0 and that entails installing the 64-bit Microsoft Access Database Engine and I cannot do that because our network version of Microsoft Office 2010 is 32-bit and in order to install the 64-bit Microsoft Access Database
Engine 2010 it's prompting me to uninstall Microsoft Office 2010 and that is not possible.
Ugh!
So I'm hoping that I can promote and deploy this current SSIS Package to Production and create a SQL Server Agent Job that will successfully run this and its dynamic Excel commands.
Do you know of any hurdles with this? Any anomalies...struggles...
Thanks for your review and am hopeful for a reply.
Here's the C# Script...which works perfectly client side...
string StrFileName = (Dts.Variables["User::FileName"].Value.ToString());
StrFileName = Path.GetFileNameWithoutExtension(StrFileName);
string StringSourceFile = (Dts.Variables["User::FilePath"].Value.ToString()) + StrFileName + ".xlsx";
string StringDestinationFile = (Dts.Variables["User::FilePath"].Value.ToString()) + StrFileName + ".xls";
// This initiates the Excel Application
Microsoft.Office.Interop.Excel.Application excelApplication = new Microsoft.Office.Interop.Excel.Application();
// This Opens the Source .xlsx File from Emdeon ePaySmart
Workbook workbook = excelApplication.Workbooks.Open(StringSourceFile, XlUpdateLinks.xlUpdateLinksNever, true, Type.Missing, Type.Missing, Type.Missing, Type.Missing, Type.Missing, Type.Missing, Type.Missing, Type.Missing, Type.Missing, Type.Missing, Type.Missing, Type.Missing);
// This will Save the Source .xlsx Emdeon ePaySmart File as a .xls File...note xlFileFormat.xlExcel5
workbook.SaveAs(StringDestinationFile, XlFileFormat.xlExcel8, Type.Missing, Type.Missing, Type.Missing, Type.Missing, XlSaveAsAccessMode.xlExclusive, Type.Missing, Type.Missing, Type.Missing, Type.Missing, Type.Missing);
// This will Close the Source
workbook.Close(false, Type.Missing, Type.Missing);
// This shuts down the Excel Application
excelApplication.Quit();

This should work if you use a proxy to run this package in the Agent; see:
http://www.mssqltips.com/sqlservertip/2163/running-a-ssis-package-from-sql-server-agent-using-a-proxy-account/
Arthur
MyBlog
Twitter

SQL Server Agent Job intermittently running for packages on SSISDB

I created an SSIS package to pull data from OLAP Cube and push it into SQL Server using SSIS 2o12. I deployed the same on the SQL Server SSIS DB and created a SQL Server Agent Job to run the package. I have an account configured to run the job (not by
creating proxy in the job, but SQL Server Agent is running under that account), that has access to the OLAP Cube. The job is running sometimes and failing sometimes. Why the job behaving weirdly. Any help on the issue will help me a lot. I am using SQL Server
2012 SP1 enterprise edition (11.0.3000.0) (if it helps). The error message which pops up when it fails is :
OLE DB Source failed the pre-execute phase and returned error code 0xC0202009
SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80040E05.
An OLE DB record is available. Source: ""Microsoft OLE DB Provider for SQL Server 2012 Analysis Services."" Hresult: 0x00000001 Description: ""Error Code = 0x80040E05, External Code = 0x00000000:."".
"

Hi,
You are using Execute SQL Task to run a MDX query, right? If so, here is an approach/workaround for your reference. If the MDX query doesn’t have parameters, you can create a view in SQL running the MDX query and make the Execute SQL Task to get data
from that view. If the MDX query has parameters, you can try a Function and create a stored procedure, and then set the Execute SQL Task to execute that stored procedure.
Regards,
Mike Yin
TechNet Community Support

SQL Server Agent Job Duration monitor alerts incorrectly

Similar Messages

Maybe you are looking for