SQL Server Agent Jobs error for Slowly changing dimension
Hi,
I have implemented Slowly changing dimension in 5 of my packages for lookup insert/update.
All the packages are running good in SSDT. And when i deployed the project to SSISDB and run the packages all are running successfully. But when i created a job out of that and run the packages, then 3 packages ran successfully and 2 packages failed.
When i opened All Execution Report. I found the following error:
Message
Message Source Name
Subcomponent Name
Process Provider:Error: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80004005. An OLE DB record is available. Source: "Microsoft SQL Server Native Client 10.0" Hresult: 0x80004005 Description:
"Login timeout expired". An OLE DB record is available. Source: "Microsoft SQL Server Native Client 10.0" Hresult: 0x80004005 Description: "A network-related or instance-specific error has occurred while establishing
a connection to SQL Server. Server is not found or not accessible. Check if instance name is correct and if SQL Server is configured to allow remote connections. For more information see SQL Server Books Online.". An OLE DB record is available.
Source: "Microsoft SQL Server Native Client 10.0" Hresult: 0x80004005 Description: "Named Pipes Provider: Could not open a connection to SQL Server [53]. ".
Process Provider
Slowly Changing Dimension [212]
Then i opened Provider package in SSDT and changed the source reading record limit from 4,00,000 to 15,000 in source query and deployed again and run, then the job succeeded. more than 15,000 failed.
And in the 2nd experiment, I removed slowly changing dimension task and implemented normal lookup for insert/update, and set the source reading limit again to 4,00,000 and deployed again and run, then the job succeeded.
Now i am not able to figure out, what exactly is the problem with Slowly changing dimension task for more than 15,00 records in SQL Server Agent Job run?
Can anybody pls help me out.
Thanks
Bikram
Hi Vikash,
As i have mentioned in the above post, below 2 scenarios:
"Then i opened Provider package in SSDT and changed the source reading record limit from 4,00,000 to 15,000 in source
query and deployed again and run, then the job succeeded. more than 15,000 failed.
And in the 2nd experiment, I removed slowly changing dimension task and implemented normal lookup for insert/update, and set the source reading limit again to 4,00,000 and deployed again and run, then the job succeeded."
That means i am able to connect to sql server.
But if i change the 1st scenario and read 4,00,000 records, the job fails and shows the above mentioned error.
Similarly in the 2nd scenario, if i implement SCD look up, the job fails and shows the above mentioned error.
And i am consistently reproducing this.
Thanks
Bikram
Similar Messages
-
SQL SERVER AGENT JOB ERROR - SSIS PACKAGE
Hi ,
I have a SQL server agent job which runs SSIS package as the daily job. The SSIS package contains multiple child package. Its a master package which calls other SSIS package. The master package calls 23 SSIS packages, few of the packages runs in parallel.
I am getting the below 2 different errors more frequently. It fails only in the production server, I scheduled the job in UAT server, it did not fail. Also when we run the master package with out sql agent job, it did not fail.
Error 1 :
R6025 - pure virtual function call. The return value was unknown. The process exit code was 255. The step failed.
Error 2 : The step did not generate any output. The return value was unknown. The process exit code was -1073741819. The step failed.
We tried browsing for the answers ,no luck. It failing in live , so we need to run the package manually in live server every time.
Please help me to resolve this issue. Thanks in advance.
Regards,
Dhivya SivakumarHi Vijeth,
Thanks for your reply.
1) Run the Package manually and check whether it runs successfully. -
No Failures. Package completed succesfully
2) If Step 1 is successful,
a) Point the same package to the UAT database and run it and check whether it runs successfully or not. -
We tried to schedule the package almost for 1 month. No failures in UAT.
b) In UAT database, point to the Production database and run the package. - I am not sure, if i can do this.I will try and let you know the result.
These steps will help us identify whether the problems lies within the package or the Environment.
3) Run the Package manually in production Environment using dtexec utilily. -
No Failures. Success.
4) Check the ID used to run the SQL Agent job and modify to an account with elevated permissions or GRANT more permissions to the existing ID. -
The account used currently is having all the privileges. Its the most powerful user in live DB.
Regards,
Dhivya S -
VBScript Runs Correctly From Command Prompt, But Not From SQL Server Agent Job
I'm trying to run this script on my local machine to do some post-batch cleanup and it doesn't run correctly from the scheduled job (or when I invoke the job).
Here's the script in question:
Option Explicit
Const filePath = "C:\Documents and Settings\jmunn\My Documents\Visual Studio 2008\Logs\"
Const holdDays = 6
main
Sub Main()
ClearArchive
End Sub
Sub ClearArchive()
Dim fso 'As Scripting.FileSystemObject
Dim fld 'As Scripting.Folder
Dim f 'As Scripting.File
Dim delLogName, delLogOut, delCtr
Set fso = CreateObject("Scripting.FileSystemObject")
Set fld = fso.GetFolder(filePath)
delLogName = filePath & "Nightly Backup - Backup Logs Deleted" & ".txt"
Set delLogOut = fso.CreateTextFile(delLogName, True)
delLogOut.WriteLine(delLogName)
delLogOut.WriteLine("")
delLogOut.WriteLine("-- The following log files were deleted on " & DateValue(Now()) & " at " & TimeValue(Now()))
delLogOut.WriteLine("")
delCtr = 0
For Each f In fld.Files
If Left(f.Name, 48) = "Nightly Backup - SQL Server Databases_Subplan_1_" And Right(LCase(f.Name), 4) = ".txt" Then
If DateDiff("d", f.DateCreated, Date()) > holdDays Then
delLogOut.WriteLine(f.Name)
fso.DeleteFile f, True
delCtr = delCtr + 1
End If
End If
Next
If delCtr = 0 Then
delLogOut.WriteLine("No log files were deleted this run...")
End If
Set fld = Nothing
Set fso = Nothing
delLogOut.Close
End Sub
If I put the script in its own file and run it from the command prompt, it runs just fine. If the script runs from the SQL Server Agent job, the for-loop will delete the files correctly, but the filenames
do not get written to the deletion log file and the counter does not get incremented, so according to the job log, nothing was deleted. Why does the script run differently from each invocation? It can't be a permission thing, the service that logs in has full
access to the directory and the files do get deleted. Any ideas out there?
Between this and other outstanding issues, I'm quickly losing faith in SQL Server. >=o(
Thanks in advance for your thoughts!
John
Version Info:
Microsoft SQL Server Management Studio 10.0.2531.0
Microsoft Analysis Services Client Tools 10.0.1600.22
Microsoft Data Access Components (MDAC) 3.85.1132
Microsoft MSXML 2.6 3.0 4.0 5.0 6.0
Microsoft Internet Explorer 8.0.6001.18702
Microsoft .NET Framework 2.0.50727.3603
Operating System 5.1.2600
"A bus station is where a bus stops. A train station is where a train stops. On my desk I have a workstation..."Hi
jrmunn
i am trying to execute VB script to refresh my excel files.. using Vbscript file through SQL Agent job step.
i have copied VBscript in a file with the extension RefreshExcel.vbs kept in C:\RefreshExcel.vbs
Below is the script used inside the file (RefreshExcel.vbs)
//---Script code-----------------------------------------------------------------
Dim objXL, objWB
Dim FileLocation, FileName
On Error Resume Next
'lgnConn = 1
FileLocation = "F:\Reports\Reports"
Set objXL = CreateObject("Excel.Application")
objXL.DisplayAlerts = False
FileName = "ReportFile1.xlsx"
'MsgBox (FileLocation & "/" & FileName)
Set objWB = objXL.Workbooks.Open(FileLocation & "/" & FileName)
objWB.EnableConnections
objXL.CalculateUntilAsyncQueriesDone
objWB.RefreshAll
objXL.CalculateUntilAsyncQueriesDone
objWB.RefreshAll
objXL.CalculateUntilAsyncQueriesDone
objWB.Save
objWB.Close
Set objWS = Nothing
Set objWB = Nothing
objXL.Quit
Set objXL = Nothing
'MsgBox ("Refresh Completed")
---------------------------------------------------------------------------------------------------//Script complete
Now when i am trying to call this script file in SQL agent job step (as you mentioned )
as Type -cmdExec(OperatingSystem)
cscript "C:\RefreshExcel.vbs"
Issue: job step executed succesfully ,,but without performing any refresh on the excel. So i am not understandig what is going wrong. the same script file work when i am calling it through a batch file (window scheuler task). But it doesnt support
to run the file "when user is not logged in"
that is why i want to refresh my excel file through sql agent ,which can be scheduled to any time and cab be run as SQL agent credentials.
Can you please help me on this ...i have tried all the option but nothing working .. found hope by seeing your solution.
Thanks in advance.
Please help me. :-( -
SQL Server Agent job between 2 instances fails with Error 18456 - Login Failed for user
Hi,
SQL Server version: 2012 EE
OS: Windows 2008 R2 Enterprise
In my server, i have 2 instances, and I am trying to configure a SQL Server Agent job to query one table in Instance A, and insert some modified data in Instance B, both in the same server.
When i execute the job in instance A, i get the following error:
Executed as user: NT SERVICE\SQLSERVERAGENT. Login Failed for user "NT SERVICE\SQLSERVERAGENT". [SQLSTATE 28000] (Error 18456). The step failed.
I have already configure instance A as Master and disabled encryption, by changing the parameter MsxEncryptChannelOptions to 0 in regedit. I've also made my target instance (instance B) as a Target.
What am i missing?
Thanks for your attention and pacienceHello,
The NT SERVICE\SQLSERVERAGENT (virtual) account is not available on the other as you just mentioned. That is the reason for the login
failed error. Try using a Windows login as the
SQL Server Agent service account in both servers, the same Windows login (not a virtual account), and run jobs as the “sa” account.
http://msdn.microsoft.com/en-us/library/ms345578.aspx
You can also try a proxy account.
http://technet.microsoft.com/en-US/library/ms190698(v=SQL.105).aspx
Hope this helps.
Regards,
Alberto Morillo
SQLCoffee.com -
Database Mail Fails For SQL Server Agent Jobs / Maintenace plans - Why ?
Database Mail Fails For SQL Server Agent Jobs / Maintenace plans - Why ?
This has been a very common question I have seen relatedt to Database mail and I thought will post here so if you run into this issue, it could be due to one of the following and also have mentioned below how to get around them. Bottom line is datbase mail works fine with SQL Agent jobs and maintenace plans in SP1 on all platforms.
1. If you see this on 64 bit platform and on RTM build, this is a bug that is addressed in SP1.
2. If you see the below error message, it is known issue and this is because of design that requires SQL Agent to restart, if SQL Agent was started before enabling databasemail and setting a new profile. We are evaluating to change this design of not requiring to restart agent for our future release.
Re: 264] An attempt was made to send an email when no email session has been established
This problem will go away after restarting SQL Server Agent in this case. Thanks,
Gops Dwarak, MSFTThis may be related to the fact that DBMail, by default, shuts itself down after 10 minutes of inactivty. If the mail service isn't running, you won't be able to queue up any mail messages.
There may be a built-in mechanism for addressing this problem, but I found that I can detect this situation and start the mail listener before sending db mail. I use the following in stored procs that need to send email.
You could increase the inactivity period for db mail shutdown from 600 seconds to some larger value. It might not make sense to do so, since shutting it down releases its resources back to teh system; if your SQL server only sneds mail infrequently, it might be better to start the mail listener on demand. Someone with more experience than I might want to add their two cents' worth. :-)
/* Check the mail engine. Start the service if is is stopped */
/* -- the DB Mail engine shuts down after 10 minutes (of inactivity) */
/* -- this setting can be changed, but we probably don't need to. */
DECLARE @rc INT
IF NOT EXISTS (SELECT * FROM msdb.sys.service_queues
WHERE name = N'ExternalMailQueue' AND is_receive_enabled = 1)
EXEC @rc = msdb.dbo.sysmail_start_sp
-- TODO: add handling and logging for any engine start issues -
Error While executing a SSIS package which contains a script task through SQL Server Agent job
Hi,
I have a SQL Server 2012 SSIS package with a script task along with other tasks [data flow, execute sql tasks ]. When I manually executed the job through BIDS, its completed successfully.
Then I have automated the execution of the package through SQL Server Agent Job. But when I executed the package through SQL Agent job, it runs successfully for all the tasks except script task. When it comes to execute the Script Task, it is getting failed
with the below error message.
"Error: 2012-08-29 12:45:14.67
Code: 0x00000001
Source: Script Task
Description: Exception has been thrown by the target of an invocation.
End Error
DTExec: The package execution returned DTSER_FAILURE (1).
Started: 12:45:10 PM
Finished: 12:45:14 PM
Elapsed: 4.353 seconds
I have installed the SSIS on the 64-bit environment and SSIS service is running. Also I tried to run the job through 32 bit [job option] but I am getting the above error in all cases.
Any help will be greatly appreaciated !
Thanks,
Navin
- naveen.reddyHi Arthur,
My script task access the excel files in a network share, refresh them all and save them. When I execute the ETL manually or thru DTEXEC, it is executing successfully. I am facing the issue when I am executing thru SQL Agent Job only. Logging also showing
the same error.
"Error: 2012-08-23 12:45:14.67
Code: 0x00000001
Source: Script Task
Description: Exception has been thrown by the target of an invocation.
End Error
DTExec: The package execution returned DTSER_FAILURE (1).
Started: 12:45:10 PM
Finished: 12:45:14 PM
Elapsed: 4.353 seconds
- naveen.reddy -
Error while executing SSIS package which contains Script component through SQL Server Agent Job
Hello All,
I have written one SSIS 2012 package which is fetching records from CSV and put it into staging DB and from staging DB , using SSIS script component task, I am inserting data into Dynamics CRM. So far it is working fine when
I manually execute SSIS package.
but when I run the SSIS package using SQL server agent job, I encounter below error. After seeing below error at step "Insert TLM Headers Script Component " I understand that it is failing at script component which I have used in SSIS package,
but I am not sure what is the cause behind that? please advise.
Error:
Executed as user: domain\user account. Microsoft (R) SQL Server Execute Package Utility Version 11.0.5556.0 for 64-bit Copyright (C) Microsoft Corporation. All rights reserved. Started: 1:21:41 PM Error: 2015-02-25
13:21:45.94 Code: 0xC0047062 Source: Insert TLM Headers Script Component [205] Description: System.ServiceModel.FaultException: The server was unable to process the request due to an internal
error. For more information about the error, either turn on IncludeExceptionDetailInFaults (either from ServiceBehaviorAttribute or from the <serviceDebug> configuration behavior) on the server in order to send the exception information back to
the client, or turn on tracing as per the Microsoft .NET Framework 3.0 SDK documentation and inspect the server trace logs. Server stack trace: at System.ServiceModel.Channels.ServiceChannel.ThrowIfFaultUnderstood(Message
reply, MessageFault fault, String action, MessageVersion version, FaultConverter faultConverter) at System.ServiceModel.Channels.ServiceChannel.HandleReply(ProxyOperationRuntime operation, ProxyRpc& rpc)
at System.ServiceModel.Channels.ServiceChannel.Call(String action, Boolean oneway, ProxyOperationRuntime operation, Object[] ins, Object[] outs, TimeSpan timeout) at System.ServiceModel.Channels.ServiceChannelProxy.InvokeService(IMethodCallMessage
methodCall, ProxyOperationRuntime operation) at System.ServiceModel.Channels.ServiceChannelProxy.Invoke(IMessage message) Exception rethrown at [0]: at Microsoft.SqlServer.Dts.Pipeline.ScriptComponentHost.HandleUserException(Exception
e) at Microsoft.SqlServer.Dts.Pipeline.ScriptComponentHost.ProcessInput(Int32 inputID, PipelineBuffer buffer) at Microsoft.SqlServer.Dts.Pipeline.ManagedComponentHost.HostProcessInput(IDTSManagedComponentWrapper100
wrapper, Int32 inputID, IDTSBuffer100 pDTSBuffer, IntPtr bufferWirePacket) End Error Error: 2015-02-25 13:21:45.94 Code: 0xC0047022 Source: Insert TLM Headers SSIS.Pipeline
Description: SSIS Error Code DTS_E_PROCESSINPUTFAILED. The ProcessInput method on component "Script Component" (205) failed with error code 0x80131501 while processing input "Input 0" (215). The identified component returned an error
from the ProcessInput method. The error is specific to the component, but the error is fatal and will cause the Data Flow task to stop running. There may be error messages posted before this with more information about the failure. End Error
DTExec: The package execution returned DTSER_FAILURE (1). Started: 1:21:41 PM Finished: 1:21:45 PM Elapsed: 4.009 seconds. The package execution failed. The step failed.
Thanks
Pankajdomain\user account has not proper rights
That being said, often SSIS jobs require a proxy to be runnable and this is how you make one up
http://www.mssqltips.com/sqlservertip/2163/running-a-ssis-package-from-sql-server-agent-using-a-proxy-account/
Arthur
MyBlog
Twitter -
SQL Server Agent Job intermittently running for packages on SSISDB
I created an SSIS package to pull data from OLAP Cube and push it into SQL Server using SSIS 2o12. I deployed the same on the SQL Server SSIS DB and created a SQL Server Agent Job to run the package. I have an account configured to run the job (not by
creating proxy in the job, but SQL Server Agent is running under that account), that has access to the OLAP Cube. The job is running sometimes and failing sometimes. Why the job behaving weirdly. Any help on the issue will help me a lot. I am using SQL Server
2012 SP1 enterprise edition (11.0.3000.0) (if it helps). The error message which pops up when it fails is :
OLE DB Source failed the pre-execute phase and returned error code 0xC0202009
SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80040E05.
An OLE DB record is available. Source: ""Microsoft OLE DB Provider for SQL Server 2012 Analysis Services."" Hresult: 0x00000001 Description: ""Error Code = 0x80040E05, External Code = 0x00000000:."".
"Hi,
You are using Execute SQL Task to run a MDX query, right? If so, here is an approach/workaround for your reference. If the MDX query doesn’t have parameters, you can create a view in SQL running the MDX query and make the Execute SQL Task to get data
from that view. If the MDX query has parameters, you can try a Function and create a stored procedure, and then set the Execute SQL Task to execute that stored procedure.
Regards,
Mike Yin
TechNet Community Support -
While i am trying to start the sql server agent job getting the error
Hi,
when ever i am trying to executing the sql server agent job's through manual that time i am getting the below error.Hi,
when ever i am trying to executing the sql server agent job's through manual that time i am getting the below error.
I searched net for this type of error and found that Latest SP can fix this issue.See below link
http://social.msdn.microsoft.com/Forums/sqlserver/en-US/12181324-bc51-41a5-a8a5-608bfe2725e9/could-not-load-type-smoagentjobbasecollection?forum=sqlsmoanddmo
Can you also refer to this link
http://www.sqldbadiaries.com/2010/12/20/could-not-load-file-or-assembly-error-while-using-tdp-makes-a-come-back/
Also please see this connect also
http://connect.microsoft.com/SQLServer/feedback/details/280907/sql-agent-job-actions-fail-from-job-activity-monitor
hope this helps
Please mark this reply as the answer or vote as helpful, as appropriate, to make it useful for other readers -
Hi Team,
I am running a sql server job which is loading data to a sharepoint document library.File is an excel format and is getting loaded
when executed through SSDT solution .But when i am using an SQL Agent job to pick up the file it doesnt get the path and agent job fails with the error "Failed to acquire connection".I have deployed the SSIS Package through SQL Server 2012 deployment
methodologies.
I am not able to trace the error of loading data from a sharepoint library.library. Sql agent jobs works fine when i give local path.The
account which is running the sql agent job is the same who has access to document library.I also tried to run the job through proxy account. I am using a xml configuraion to store my credentials.I am able to palce the same file to a network drive in the same
server through sql server agent job. The only problem is when I am trying to load the file to a sharepoint folder.
Thanks,
Arsa..Is that the WebDAV method that you are suggesting here to map the n/w drive?
Its kind of webdav but you will be using windows nw drive to store data
yes, I am able to create the file to D: , but didn't check with the C:.
Try with c:, as c: require special permisssions
If this helped you resolve your issue, please mark it Answered -
Copyright (C) Microsoft Corp 1984-2005. All rights reserved. Started: 10:00:01 AM Error: 2014-08-15 10:00:07.20
Code: 0xC0047062 Source: Data Flow Task LEAN [6761]
Description: Teradata.Client.Provider.TdException: [Teradata Database] [3006] Logons are disabled.
at Teradata.Client.Provider.WpMessageManager.CheckForError()
at Teradata.Client.Provider.WpMessageManager.ProcessResponse()
at Teradata.Client.Provider.WpLogonManager.Action()
at Teradata.Client.Provider.WpSession.ManagerAction(WpMessageManager manager, UtlStopwatchWrapper watch, Int32 connectionTimeout)
at Teradata.Client.Provider.WpSession.Open(Int32 connectionTimeout, String password)
at Teradata.Client.Provider.WpSession.Open(Int32 connectionTimeout)
at Teradata.Client.Provider.Connection.Open(UtlConnectionString connectionString, UInt32 timeout)
at Teradata.Client.Provider.ConnectionPool.CreateConnection(UInt32 timeout)
at Teradata.Client.Provider.ConnectionPool.GetConnectionFromPool(Object owningObject)
at Teradata.Client.Provider.ConnectionFactory.GetConnection(Object owningObject, UtlConnectionString connStr)
at Teradata.Client.Provider.TdConnection.Open()
at Microsoft.SqlServer.Dts.Runtime.ManagedHelper.GetManagedConnection(String assemblyQualifiedName, String connStr, Object transaction)
at Microsoft.SqlServer.Dts.Runtime.Wrapper.IDTSConnectionManager100.AcquireConnection(Object pTransaction)
at Microsoft.SqlServer.Dts.Pipeline.DataReaderSourceAdapter.AcquireConnections(Object transaction)
at Microsoft.SqlServer.Dts.Pipeline.ManagedComponentHost.HostAcquireConnections(IDTSManagedComponentWrapper100 wrapper, Object transaction)
End Error Error: 2014-08-15 10:00:07.35 Code: 0xC0047017 Source: Data Flow Task SSIS.Pipeline
Description: component "LEAN" (6761) failed validation and returned error code 0x80004005. End Error Error: 2014-08-15 10:00:07.48
Code: 0xC004700C Source: Data Flow Task SSIS.Pipeline Description: One or more component failed validation.
End Error Error: 2014-08-15 10:00:07.60 Code: 0xC0024107 Source: Data Flow Task
Description: There were errors during task validation. End Error
DTExec: The package execution returned DTSER_FAILURE (1). Started: 10:00:01 AM Finished: 10:00:07 AM
Elapsed: 6.692 seconds. The package execution failed. The step failed.
SQL Server agent job fails with above error, Please let me know process tohandle it.
Thanks,
Vishal.The error message suggests its the issue with Teradata source database to which SSIS tries to connect within the data flow task. Make sure Teradata database is available and LOGON is enabled.
Please Mark This As Answer if it helps to solve the issue Visakh ---------------------------- http://visakhm.blogspot.com/ https://www.facebook.com/VmBlogs -
What SQL Server Agent jobs are currently running and for how long
Is there a way to tell what SQL Server Agent jobs are currently running and for how long? View history isn't working in my case because it's only showing completed jobs. John Schroeder
You can use the "Job Activity Monitor" for doing this. Do the following steps. It will open up the Job Activity Monitor.
1. In Object Explorer, connect to an instance of the SQL Server Database Engine, and then expand that instance.
2. Expand SQL Server Agent.
3. Right-click Job Activity Monitor and click View Job Activity.
4. In the Job Activity Monitor, you can view details about each job that is defined for this server.
In Job Activity Monitor page, we have column called Status. It will indicate whether job is executing or idle. Last Run column will give you the last invocation time of this job.
Use the following link for further reference.
http://msdn.microsoft.com/en-us/library/ms187449.aspx
Thanks,
Sateesh.
Mark Post as helpful if it provides any help.Otherwise,leave it as it is. -
SQL Server Agent Job And Database Mail - Error formatting query, probably invalid paramters
We have a stored procedure that we are trying to call with a SQL Server Agent Job. The stored procedure calls Database Mail. This is SQL 2008. The execute task is simply:
USE [Production]
GO
EXEC [dbo].[JOB_EMAIL_SCHEDULED_REPORTS]
GO
When the job runs, it is erroring out immediately, with the error:
Execute as user: NT AUTHORITY\NETWORK SERVICE. Error formatting query, probably invalid paramters [SQLSTATE 42000] (Error 22050). The step failed.
When we go into SQL Server Manager and just execute the SQL query, it works though. Something within the SQL Server Agent job, and Database Mail is causing problems. Any ideas? Thanks.Justin,
If you use SSMS then the procedure is executed under a different user when compared to running using a SQL Server Agent Job.
Isolate the problem by running a SQL Server agent job that sends a mail. Also check if the NT Authority\Network Service account is
in good standing. Look at the below thread with a similar problem that had an expired account.
http://social.msdn.microsoft.com/Forums/en/sqltools/thread/bac7ecee-a156-4313-b532-ba15813a0700
http://SankarReddy.com/ -
SSIS Package Fails when Scheduled as a SQL Server Agent Job
I have an SSIS package that runs without any problems when executed through BIDS.
However, when I schedule the SSIS as an Agent job, it fails completely or part way through. When it partially runs, the part that it is failing on is a Script Task that moves the source data file to an archive folder (on the same server).
I have tried using my domain account as the owner of the job, then the job fails straight off and I get an error:
Unable to determine if the owner (Domain\MyID) of job JobName has server access (reason: Could not obtain information about Windows NT group/user 'Domain\MyID'
If I change the owner to the 'sa' account , then the job partially runs, but then fails because 'sa' is a SQL account and does not have access to the filesystem.
I have managed to get it to work by using the SQL2008_Local account and granting modify permissions to the affected folders.
My question is - what is the advised way of doing this?
Thanks
GaryHi Garyv.King,
When you see a SSIS package fails running in a SQL Agent job, you need to first consider the following conditions:
1. The user account that is used to run the package under SQL Server Agent differs from the original package author.
2. The user account does not have the required permissions to make connections or to access resources outside the SSIS package.
For more detailed information about the issue, please following this KB article:
An SSIS package does not run when you call the SSIS package from a SQL Server Agent job step
http://support.microsoft.com/kb/918760
You can check SQL Server Agent’s activity logs, Windows Event logs and SSIS logs to get more clues. Also the tool Process Monitor is helpful to track the cause of registry or file access related issues.
The following 4 issues are common encountered in the SSIS forum.
1. The package's Protection Level is set to EncryptSensitiveWithUserKey but your SQL Server Agent service account is different from the SSIS package creator.
2. Data source connection issue.
3. File or registry access permission issue.
4. No 64-bit driver issue.
For more information about it, please see:
How do I troubleshoot SSIS packages failed execution in a SQL Agent job:
http://social.technet.microsoft.com/Forums/en-US/sqlintegrationservices/thread/e13c137c-1535-4475-8c2f-c7e6e7d125fc
Thanks,
Eileen -
Excel Import Fails in SQL Server Agent Job but not when executed in BIDS
We have a SQL Server agent job that has ran successfully for the past 6 months. It started failing about a week ago. I don't believe anyone installed anything on the server. The proxy account used to run the job is an admin on the server.
I've tried everything I can think of or that I found on searches. I even changed the connection manager from an Excel source to using an Microsoft office 12.0 Access Database Engine OLEDB connection and it still runs in BIDs and not as an agent job.
I also setup my LANID as a proxy account to see if the job would run (checking security) -- and it fails with the same error. I also made sure the path is
\\server\share rather than a drive letter. Any ideas?
The package is executed in 32 bit mode. The package still runs fine in BIDS (where BIDs is opened on the server) but fails in the SQL Agent job with:
Executed as user: xxxxxx\xxxxxx. Microsoft (R) SQL Server Execute Package Utility Version 11.0.2100.60 for 32-bit Copyright (C) Microsoft Corporation. All rights reserved. Started: 9:00:00 AM Error: 2014-12-01 09:00:02.46
Code: 0xC0202009 Source: xxxxxx Connection manager "Excel Connection Manager" Description: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80004005. An OLE
DB record is available. Source: "Microsoft Access Database Engine" Hresult: 0x80004005 Description: "External table is not in the expected format.". End Error Error: 2014-12-01 09:00:02.65
Code: 0xC020801C Source: Load File to Staging Excel Source [43] Description: SSIS Error Code DTS_E_CANNOTACQUIRECONNECTIONFROMCONNECTIONMANAGER. The AcquireConnection method call to the connection manager
"Excel Connection Manager" failed with error code 0xC0202009. There may be error messages posted before this with more information on why the AcquireConnection method call failed. End Error Error: 2014-12-01 09:00:02.77
Code: 0xC0047017 Source: Load File to Staging SSIS.Pipeline Description: Excel Source failed validation and returned error code 0xC020801C. End Error Error: 2014-12-01 09:00:02.90
Code: 0xC004700C Source: Load File to Staging SSIS.Pipeline Description: One or more component failed validation. End Error Error: 2014-12-01 09:00:03.02 Code: 0xC0024107
Source: Load File to Staging Description: There were errors during task validation. End Error DTExec: The package execution returned DTSER_FAILURE (1). Started: 9:00:00 AM Finished: 9:00:03 AM
Elapsed: 2.761 seconds. The package execution failed. The step failed.I logged on to the server with the account that the SQL Agent runs under and ran the following from a command
line to execute the package:
"D:\Program Files (x86)\Microsoft SQL Server\110\DTS\Binn\DTEXEC.exe" /FILE
"\"K:\SSIS\xxxxxx\xxxxx.dtsx\"" /CHECKPOINTING OFF
/REPORTING EWCDI /X86
I wanted to see if it was a security issue with the agent account account - but
this ran fine.
I then updated the SQL Agent job to use an operating system command instead
of a SSIS package on the job step. This fails...
The issue is definately with the SQL Server Agent
Maybe you are looking for
-
ITunes 10.7 install wants to move my music library.
I need to upgrade iTunes 10.6 on my Windows 7 Lenovo T420 laptop to 10.7 to use my new iPod Classic (replaces my iPod video), and I'm not yet ready to accommodate the changes in iTunes 11. My iTunes music data files have been moved to a large partiti
-
How can I control the size of the af:InputText?
Hi, How can I control the size of the 'af:InputText' on the UI, without using columns & rows attributes. Even though I am using width & height attributes, the changes are not getting reflected in the UI. Thanks, Rajesh.
-
Hi , Can anybody tell me what is check package in Extended check of webdynpro application. I am getting below error under package check when doing the extended check . Program: /1BCWDY/GK2ISOBFBOQSBXDREA53==CP Include: /1BCWDY/B_GK2IUUMYK
-
Inconsistency problem with Image preview using ImageServlet -JSP
I have a Servlet that reads Images ( JPG) from file system and sends bites to response, Code works fine and I can see the Image, Problem is that it is very Inconsistent sometimes I can see image and sometimes I see the red X mark instead of image, if
-
Recent bugs? Click when clicking off/Related to the Sort Artist/Album/Track
I've had my G5 for about a year now and it bit the dust, 4 days before my year was up :-D So I got it replaced but since then I have noticed something odd. I have clicking turned off but I can still hear it faintly in my headphones. Also, I began tag