SQL Server Agent Jobs- Not running

Team,
We have a production database hosted on SQL Server 2008R2 SP2(10.50.4000). We have application jobs which are scheduled and basically have packages called from this job. These jobs were running all good till yesterday and it has stopped working since yesterday
even though its enabled. Manual runs are successful. Other jobs are running fine.
Checked the Owner of these jobs and the account is SQL Server account which is a proxy account. It had enforce password policy. I have removed that and reset the password to original. However it didnt work.
The last change on this server was windows patching which was performed last week. Apart from that the SQL Server agent service was changed. This is a clustered environment.
The last resort is restart the agent, however would like to get some inputs before I perform this action.
Please let me know your valuable inputs.
Regards,
Sharath

If job is not executed at all, that is, there are no entries in the job history, check:
1) The job is enabled.
2) The schedule(s) is enabled.
3) The scdedule does not have an end date has has passed.
4) And that all other conditions on the schedule says that the job should run.
Erland Sommarskog, SQL Server MVP, [email protected]

Similar Messages

SQL Server Agent Job intermittently running for packages on SSISDB

I created an SSIS package to pull data from OLAP Cube and push it into SQL Server using SSIS 2o12. I deployed the same on the SQL Server SSIS DB and created a SQL Server Agent Job to run the package. I have an account configured to run the job (not by
creating proxy in the job, but SQL Server Agent is running under that account), that has access to the OLAP Cube. The job is running sometimes and failing sometimes. Why the job behaving weirdly. Any help on the issue will help me a lot. I am using SQL Server
2012 SP1 enterprise edition (11.0.3000.0) (if it helps). The error message which pops up when it fails is :
OLE DB Source failed the pre-execute phase and returned error code 0xC0202009
SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80040E05.
An OLE DB record is available. Source: ""Microsoft OLE DB Provider for SQL Server 2012 Analysis Services."" Hresult: 0x00000001 Description: ""Error Code = 0x80040E05, External Code = 0x00000000:."".
"

Hi,
You are using Execute SQL Task to run a MDX query, right? If so, here is an approach/workaround for your reference. If the MDX query doesn’t have parameters, you can create a view in SQL running the MDX query and make the Execute SQL Task to get data
from that view. If the MDX query has parameters, you can try a Function and create a stored procedure, and then set the Execute SQL Task to execute that stored procedure.
Regards,
Mike Yin
TechNet Community Support

SQL SERVER AGENT JOB ERROR - SSIS PACKAGE

Hi ,
I have a SQL server agent job which runs SSIS package as the daily job. The SSIS package contains multiple child package. Its a master package which calls other SSIS package. The master package calls 23 SSIS packages, few of the packages runs in parallel.
I am getting the below 2 different errors more frequently. It fails only in the production server, I scheduled the job in UAT server, it did not fail. Also when we run the master package with out sql agent job, it did not fail.
Error 1 :
R6025 - pure virtual function call. The return value was unknown. The process exit code was 255. The step failed.
Error 2 : The step did not generate any output. The return value was unknown. The process exit code was -1073741819. The step failed.
We tried browsing for the answers ,no luck. It failing in live , so we need to run the package manually in live server every time.
Please help me to resolve this issue. Thanks in advance.
Regards,
Dhivya Sivakumar

Hi Vijeth,
Thanks for your reply.
1) Run the Package manually and check whether it runs successfully. -
No Failures. Package completed succesfully
2) If Step 1 is successful,
a) Point the same package to the UAT database and run it and check whether it runs successfully or not. -
We tried to schedule the package almost for 1 month. No failures in UAT.
b) In UAT database, point to the Production database and run the package. - I am not sure, if i can do this.I will try and let you know the result.
These steps will help us identify whether the problems lies within the package or the Environment.
3) Run the Package manually in production Environment using dtexec utilily. -
No Failures. Success.
4) Check the ID used to run the SQL Agent job and modify to an account with elevated permissions or GRANT more permissions to the existing ID. -
The account used currently is having all the privileges. Its the most powerful user in live DB.
Regards,
Dhivya S

How to stop SQL Server Agent Job if Stored Procedure returns value 0

I have SQL Server 2012 SSIS.
I have 2 SSIS packages.
I have created SQL Server Agent Job for running packages.
I have created steps. If first step have run succesfully next step is run.
I have need to add new logic.
I have validation stored procedure, which validate DB table values and returns 1 or 0.
I would like to create logic where first of all this SP is runned. Return value of SP determines if steps are run or not.
I was thinking to use Execute SQL Task for running SP.
If value 1 is returned, then run rest of Tasks is run.
If value 0 is returned, what should I do so that Job is stopped? I need assistance!
I want current step to stop never moved to next step.
Is there any SSIS tasks, which can stop the Job?
Or should I make Step for running validation SP?
How to do so that if value 0 is returned stop Job.
Kenny_I

Please refer the below link:
http://technet.microsoft.com/en-us/library/aa260308(v=sql.80).aspx
Please read Remarks carefully!!!
Remarks
If a job is currently executing a step of type CmdExec, the process being run (for example, MyProgram.exe) is forced to end prematurely. Premature ending can result in unpredictable behavior such as files in use by the process being held open. Consequently,
sp_stop_job should be used only in extreme circumstances if the job contains steps of type CmdExec.
Permissions
Execute permissions default to the public role in the
msdb database. A user who can execute this procedure and is a member of the
sysadmin fixed role can stop any job. A user who is not a member of the
sysadmin role can use sp_stop_job to stop only the jobs he/she owns.
When sp_stop_job is invoked by a user who is a member of the
sysadmin fixed server role, sp_stop_job will be executed under the security context in which the SQL Server service is running. When the user is not a member of the
sysadmin group, sp_stop_job will impersonate the SQL Server Agent proxy account, which is specified using
xp_sqlagent_proxy_account. If the proxy account is not available,
sp_stop_job will fail. This is only true for Microsoft® Windows® NT 4.0 and Windows 2000. On Windows 9.x, there is no impersonation and
sp_stop_job is always executed under the security context of the Windows 9.x user who started SQL Server.

SQL SERVER AGENT job dependent on another job

Hi
I have 2 Sql Server Agent jobs that run on a daily basis.
One which is run first but is dependant on another job completing.
The secone runs every 30 mins between 9:00am to 7:00pm.
If my first Job hasn't run but the 2nd job does start running the 2nd job will fail.
Is there away with SQL servent agent where if my first Job hasn't run then don't run the 2nd job?
Regards

Hi aivoryuk,
According to your description, if you set one job is dependent on another job, when the first job does not run or execute failed, then the second job will not run. I recommend you use two steps to instead of this two jobs. In step Advanced page, we can set
that the first job execute successfully then go to the next step. Or else, it will quit the job and report a failure.
The other way is that we create new job with the same schedule as the second job , in this job , we can check the first job status with the sp_help_job stored procedure, then you can use sp_start_job to Start
the second job. For more information, you can review the following post.
http://social.technet.microsoft.com/Forums/en-US/d5cb4004-02fb-4b41-a321-5197f8105941/sql-server-agent-making-1-job-dependent-on-another?forum=sqltools
Regards,
Sofiya Li
Sofiya Li
TechNet Community Support

VBScript Runs Correctly From Command Prompt, But Not From SQL Server Agent Job

I'm trying to run this script on my local machine to do some post-batch cleanup and it doesn't run correctly from the scheduled job (or when I invoke the job).
Here's the script in question:
Option Explicit
Const filePath = "C:\Documents and Settings\jmunn\My Documents\Visual Studio 2008\Logs\"
Const holdDays = 6
main
Sub Main()
ClearArchive
End Sub
Sub ClearArchive()
Dim fso 'As Scripting.FileSystemObject
Dim fld 'As Scripting.Folder
Dim f 'As Scripting.File
Dim delLogName, delLogOut, delCtr
Set fso = CreateObject("Scripting.FileSystemObject")
Set fld = fso.GetFolder(filePath)
delLogName = filePath & "Nightly Backup - Backup Logs Deleted" & ".txt"
Set delLogOut = fso.CreateTextFile(delLogName, True)
delLogOut.WriteLine(delLogName)
delLogOut.WriteLine("")
delLogOut.WriteLine("-- The following log files were deleted on " & DateValue(Now()) & " at " & TimeValue(Now()))
delLogOut.WriteLine("")
delCtr = 0
For Each f In fld.Files
If Left(f.Name, 48) = "Nightly Backup - SQL Server Databases_Subplan_1_" And Right(LCase(f.Name), 4) = ".txt" Then
If DateDiff("d", f.DateCreated, Date()) > holdDays Then
delLogOut.WriteLine(f.Name)
fso.DeleteFile f, True
delCtr = delCtr + 1
End If
End If
Next
If delCtr = 0 Then
delLogOut.WriteLine("No log files were deleted this run...")
End If
Set fld = Nothing
Set fso = Nothing
delLogOut.Close
End Sub
If I put the script in its own file and run it from the command prompt, it runs just fine. If the script runs from the SQL Server Agent job, the for-loop will delete the files correctly, but the filenames
do not get written to the deletion log file and the counter does not get incremented, so according to the job log, nothing was deleted. Why does the script run differently from each invocation? It can't be a permission thing, the service that logs in has full
access to the directory and the files do get deleted. Any ideas out there?
Between this and other outstanding issues, I'm quickly losing faith in SQL Server. >=o(
Thanks in advance for your thoughts!
John
Version Info:
Microsoft SQL Server Management Studio      10.0.2531.0
Microsoft Analysis Services Client Tools      10.0.1600.22
Microsoft Data Access Components (MDAC)      3.85.1132
Microsoft MSXML      2.6 3.0 4.0 5.0 6.0
Microsoft Internet Explorer      8.0.6001.18702
Microsoft .NET Framework      2.0.50727.3603
Operating System      5.1.2600
"A bus station is where a bus stops. A train station is where a train stops. On my desk I have a workstation..."

Hi
jrmunn
i am trying to execute VB script to refresh my excel files.. using Vbscript file through SQL Agent job step.
i have copied VBscript in a file with the extension RefreshExcel.vbs kept in C:\RefreshExcel.vbs
Below is the script used inside the file (RefreshExcel.vbs)
//---Script code-----------------------------------------------------------------
Dim objXL, objWB
Dim FileLocation, FileName
On Error Resume Next
'lgnConn = 1
FileLocation = "F:\Reports\Reports"
Set objXL = CreateObject("Excel.Application")
objXL.DisplayAlerts = False
FileName = "ReportFile1.xlsx"
'MsgBox (FileLocation & "/" & FileName)
Set objWB = objXL.Workbooks.Open(FileLocation & "/" & FileName)
objWB.EnableConnections
objXL.CalculateUntilAsyncQueriesDone
objWB.RefreshAll
objXL.CalculateUntilAsyncQueriesDone
objWB.RefreshAll
objXL.CalculateUntilAsyncQueriesDone
objWB.Save
objWB.Close
Set objWS = Nothing
Set objWB = Nothing
objXL.Quit
Set objXL = Nothing
'MsgBox ("Refresh Completed")
---------------------------------------------------------------------------------------------------//Script complete
Now when i am trying to call this script file in SQL agent job step (as you mentioned )
as Type -cmdExec(OperatingSystem)
cscript "C:\RefreshExcel.vbs"
Issue: job step executed succesfully ,,but without performing any refresh on the excel. So i am not understandig what is going wrong. the same script file work when i am calling it through a batch file (window scheuler task). But it doesnt support
to run the file "when user is not logged in"
that is why i want to refresh my excel file through sql agent ,which can be scheduled to any time and cab be run as SQL agent credentials.
Can you please help me on this ...i have tried all the option but nothing working .. found hope by seeing your solution.
Thanks in advance.
Please help me. :-(

Excel Import Fails in SQL Server Agent Job but not when executed in BIDS

We have a SQL Server agent job that has ran successfully for the past 6 months. It started failing about a week ago. I don't believe anyone installed anything on the server. The proxy account used to run the job is an admin on the server.
I've tried everything I can think of or that I found on searches. I even changed the connection manager from an Excel source to using an Microsoft office 12.0 Access Database Engine OLEDB connection and it still runs in BIDs and not as an agent job.
I also setup my LANID as a proxy account to see if the job would run (checking security) -- and it fails with the same error.   I also made sure the path is
\\server\share rather than a drive letter. Any ideas?
The package is executed in 32 bit mode. The package still runs fine in BIDS (where BIDs is opened on the server) but fails in the SQL Agent job with:
Executed as user: xxxxxx\xxxxxx. Microsoft (R) SQL Server Execute Package Utility Version 11.0.2100.60 for 32-bit Copyright (C) Microsoft Corporation. All rights reserved.    Started: 9:00:00 AM Error: 2014-12-01 09:00:02.46
Code: 0xC0202009     Source: xxxxxx Connection manager "Excel Connection Manager"     Description: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80004005. An OLE
DB record is available. Source: "Microsoft Access Database Engine" Hresult: 0x80004005 Description: "External table is not in the expected format.". End Error Error: 2014-12-01 09:00:02.65
Code: 0xC020801C     Source: Load File to Staging Excel Source [43]     Description: SSIS Error Code DTS_E_CANNOTACQUIRECONNECTIONFROMCONNECTIONMANAGER. The AcquireConnection method call to the connection manager
"Excel Connection Manager" failed with error code 0xC0202009. There may be error messages posted before this with more information on why the AcquireConnection method call failed. End Error Error: 2014-12-01 09:00:02.77
Code: 0xC0047017     Source: Load File to Staging SSIS.Pipeline     Description: Excel Source failed validation and returned error code 0xC020801C. End Error Error: 2014-12-01 09:00:02.90
Code: 0xC004700C     Source: Load File to Staging SSIS.Pipeline     Description: One or more component failed validation. End Error Error: 2014-12-01 09:00:03.02     Code: 0xC0024107
Source: Load File to Staging      Description: There were errors during task validation. End Error DTExec: The package execution returned DTSER_FAILURE (1). Started: 9:00:00 AM Finished: 9:00:03 AM
Elapsed: 2.761 seconds. The package execution failed. The step failed.

I logged on to the server with the account that the SQL Agent runs under and ran the following from a command
line to execute the package:
"D:\Program Files (x86)\Microsoft SQL Server\110\DTS\Binn\DTEXEC.exe" /FILE
"\"K:\SSIS\xxxxxx\xxxxx.dtsx\"" /CHECKPOINTING OFF
/REPORTING EWCDI /X86
I wanted to see if it was a security issue with the agent account account - but
this ran fine.
I then updated the SQL Agent job to use an operating system command instead
of a SSIS package on the job step. This fails...
The issue is definately with the SQL Server Agent

Will dynamic Excel commands in a C# Edit Script run ok as a SSISDB Package and a SQL Server Agent Job?

I've seen some conflicting things in terms of dynamic Excel commands running in a SSISDB Package and a scheduled SQL Server Agent Job...things like that it's not supported...that it won't work...etc...
It's a pretty simple script...to open up a .xlsx file and save it as a .xls file. I am trying to be proactive here and the reason I did it this way is because I could not source the .xlsx file and then I couldn't use OLE DB sourcing because I think the .xlsx
file wants you to use Microsoft.ACE.OLEDB.12.0 and that entails installing the 64-bit Microsoft Access Database Engine and I cannot do that because our network version of Microsoft Office 2010 is 32-bit and in order to install the 64-bit Microsoft Access Database
Engine 2010 it's prompting me to uninstall Microsoft Office 2010 and that is not possible.
Ugh!
So I'm hoping that I can promote and deploy this current SSIS Package to Production and create a SQL Server Agent Job that will successfully run this and its dynamic Excel commands.
Do you know of any hurdles with this? Any anomalies...struggles...
Thanks for your review and am hopeful for a reply.
Here's the C# Script...which works perfectly client side...
string StrFileName = (Dts.Variables["User::FileName"].Value.ToString());
StrFileName = Path.GetFileNameWithoutExtension(StrFileName);
string StringSourceFile = (Dts.Variables["User::FilePath"].Value.ToString()) + StrFileName + ".xlsx";
string StringDestinationFile = (Dts.Variables["User::FilePath"].Value.ToString()) + StrFileName + ".xls";
// This initiates the Excel Application
Microsoft.Office.Interop.Excel.Application excelApplication = new Microsoft.Office.Interop.Excel.Application();
// This Opens the Source .xlsx File from Emdeon ePaySmart
Workbook workbook = excelApplication.Workbooks.Open(StringSourceFile, XlUpdateLinks.xlUpdateLinksNever, true, Type.Missing, Type.Missing, Type.Missing, Type.Missing, Type.Missing, Type.Missing, Type.Missing, Type.Missing, Type.Missing, Type.Missing, Type.Missing, Type.Missing);
// This will Save the Source .xlsx Emdeon ePaySmart File as a .xls File...note xlFileFormat.xlExcel5
workbook.SaveAs(StringDestinationFile, XlFileFormat.xlExcel8, Type.Missing, Type.Missing, Type.Missing, Type.Missing, XlSaveAsAccessMode.xlExclusive, Type.Missing, Type.Missing, Type.Missing, Type.Missing, Type.Missing);
// This will Close the Source
workbook.Close(false, Type.Missing, Type.Missing);
// This shuts down the Excel Application
excelApplication.Quit();

This should work if you use a proxy to run this package in the Agent; see:
http://www.mssqltips.com/sqlservertip/2163/running-a-ssis-package-from-sql-server-agent-using-a-proxy-account/
Arthur
MyBlog
Twitter

How to run Exe file through Sql server agent job

Hello All
i have 2 servers
1.Application Server
2.Database server
Application server has a .exe file so i wanted to run this exe file through SQL server agent job from database server.
What is the process for run this Exe file
Can you plz suggest me step by step process
Kamal

While i'm trying to implement this below method
Step1 : Right Click SQL Server Agent. Select New -> Job. This will open a wizard to schedule a new
job.
Step2 : Select Steps from options given on the left side of wizard. This is the main place to set your
exe\program as a running step. Give some name to this step, Select Operating System (cmdexec) for the Type and give the full path of exe in Text box for Command.
ex:\\10.11.00.98(your application serverIP)\ch.exe
Thanks vanchan-Please
mark this reply as the answer or vote as helpful, as appropriate, to make it useful for other readers
I got this below error
Message
Executed as user:NJROSJ345\SYSTEM. The process could not be created for step1 of job
(Reason:Access is Denied)The step failed.
But i have sys admin rights on the both the servers
Kamal

How to run a SQL Server Agent job step on certain days/frequency

I've a SQL Server Agent job. One of the requirement is that a particular step should only run on certain frequency i.e. Certain Date and time. Any suggestions how can that be done?
GBM

yes
1. Make first step as a Transact SQL step. Keep command as below
IF DAY(GETDATE()) = <Your date value>
AND DATEPART(hh,GETDATE()) = <your time hour)
AND DATEPART(minute,GETDATE()) = <your time minute)
SELECT 1
ELSE
RAISERROR 'Job cant be run at this time'
Then for job step properties set the following properties in advanced tab
This would make sure it will quit the job without executing other core steps untill it reaches the required day and time
You can add more conditions in IF based on requirement like if you want time to be on certain second or month to be particular value etc
Please Mark This As Answer if it helps to solve the issue Visakh ---------------------------- http://visakhm.blogspot.com/ https://www.facebook.com/VmBlogs

What SQL Server Agent jobs are currently running and for how long

Is there a way to tell what SQL Server Agent jobs are currently running and for how long? View history isn't working in my case because it's only showing completed jobs. John Schroeder

You can use the "Job Activity Monitor" for doing this. Do the following steps. It will open up the Job Activity Monitor.
1.    In Object Explorer, connect to an instance of the SQL Server Database Engine, and then expand that instance.
2.    Expand SQL Server Agent.
3.    Right-click Job Activity Monitor and click View Job Activity.
4.    In the Job Activity Monitor, you can view details about each job that is defined for this server.
In Job Activity Monitor page, we have column called Status. It will indicate whether job is executing or idle. Last Run column will give you the last invocation time of this job.
Use the following link for further reference.
http://msdn.microsoft.com/en-us/library/ms187449.aspx
Thanks,
Sateesh.
Mark Post as helpful if it provides any help.Otherwise,leave it as it is.

Running .exe file on remote computer using SQL server Agent JOb

I am trying to run exec file on a remote server by using sql server Agent job,
what is the best way to do this
k

Configure it as an operating system job step:
http://technet.microsoft.com/en-us/library/ms190264.aspx
Alternate: build an SSIS package and schedule it as a job.
Kalman Toth Database & OLAP Architect
SELECT Video Tutorials 4 Hours
New Book / Kindle: Exam 70-461 Bootcamp: Querying Microsoft SQL Server 2012

Error while executing SSIS package which contains Script component through SQL Server Agent Job

Hello All,
I have written one SSIS 2012 package which is fetching records from CSV and put it into staging DB and from staging DB , using SSIS script component task, I am inserting data into Dynamics CRM. So far it is working fine when
I manually execute SSIS package.
but when I run the SSIS package using SQL server agent job, I encounter below error. After seeing below error at step "Insert TLM Headers Script Component " I understand that it is failing at script component which I have used in SSIS package,
but I am not sure what is the cause behind that? please advise.
Error:
Executed as user: domain\user account. Microsoft (R) SQL Server Execute Package Utility Version 11.0.5556.0 for 64-bit Copyright (C) Microsoft Corporation. All rights reserved.    Started: 1:21:41 PM Error: 2015-02-25
13:21:45.94     Code: 0xC0047062     Source: Insert TLM Headers Script Component [205]     Description: System.ServiceModel.FaultException: The server was unable to process the request due to an internal
error. For more information about the error, either turn on IncludeExceptionDetailInFaults (either from ServiceBehaviorAttribute or from the <serviceDebug> configuration behavior) on the server in order to send the exception information back to
the client, or turn on tracing as per the Microsoft .NET Framework 3.0 SDK documentation and inspect the server trace logs.    Server stack trace:      at System.ServiceModel.Channels.ServiceChannel.ThrowIfFaultUnderstood(Message
reply, MessageFault fault, String action, MessageVersion version, FaultConverter faultConverter)     at System.ServiceModel.Channels.ServiceChannel.HandleReply(ProxyOperationRuntime operation, ProxyRpc& rpc)
at System.ServiceModel.Channels.ServiceChannel.Call(String action, Boolean oneway, ProxyOperationRuntime operation, Object[] ins, Object[] outs, TimeSpan timeout)     at System.ServiceModel.Channels.ServiceChannelProxy.InvokeService(IMethodCallMessage
methodCall, ProxyOperationRuntime operation)     at System.ServiceModel.Channels.ServiceChannelProxy.Invoke(IMessage message)    Exception rethrown at [0]:      at Microsoft.SqlServer.Dts.Pipeline.ScriptComponentHost.HandleUserException(Exception
e)    at Microsoft.SqlServer.Dts.Pipeline.ScriptComponentHost.ProcessInput(Int32 inputID, PipelineBuffer buffer)     at Microsoft.SqlServer.Dts.Pipeline.ManagedComponentHost.HostProcessInput(IDTSManagedComponentWrapper100
wrapper, Int32 inputID, IDTSBuffer100 pDTSBuffer, IntPtr bufferWirePacket) End Error Error: 2015-02-25 13:21:45.94     Code: 0xC0047022     Source: Insert TLM Headers SSIS.Pipeline
Description: SSIS Error Code DTS_E_PROCESSINPUTFAILED. The ProcessInput method on component "Script Component" (205) failed with error code 0x80131501 while processing input "Input 0" (215). The identified component returned an error
from the ProcessInput method. The error is specific to the component, but the error is fatal and will cause the Data Flow task to stop running. There may be error messages posted before this with more information about the failure. End Error
DTExec: The package execution returned DTSER_FAILURE (1). Started: 1:21:41 PM Finished: 1:21:45 PM Elapsed: 4.009 seconds. The package execution failed. The step failed.
Thanks
Pankaj

domain\user account has not proper rights
That being said, often SSIS jobs require a proxy to be runnable and this is how you make one up
http://www.mssqltips.com/sqlservertip/2163/running-a-ssis-package-from-sql-server-agent-using-a-proxy-account/
Arthur
MyBlog
Twitter

Error: Failed to acquire connection while exporting a file using SSIS package through SQl Server Agent job.

Hi Team,
I am running a sql server job which is loading data to a sharepoint document library.File is an excel format and is getting loaded
when executed through SSDT solution .But when i am using an SQL Agent job to pick up the file it doesnt get the path and agent job fails with the error "Failed to acquire connection".I have deployed the SSIS Package through SQL Server 2012 deployment
methodologies.
I am not able to trace the error of loading data from a sharepoint library.library. Sql agent jobs works fine when i give local path.The
account which is running the sql agent job is the same who has access to document library.I also tried to run the job through proxy account. I am using a xml configuraion to store my credentials.I am able to palce the same file to a network drive in the same
server through sql server agent job. The only problem is when I am trying to load the file to a sharepoint folder.
Thanks,
Arsa..

Is that the WebDAV method that you are suggesting here to map the n/w drive?
Its kind of webdav but you will be using windows nw drive to store data
yes, I am able to create the file to D: , but didn't check with the C:.
Try with c:, as c: require special permisssions
If this helped you resolve your issue, please mark it Answered

SQL Server Agent Jobs error for Slowly changing dimension

Hi,
I have implemented Slowly changing dimension in 5 of my packages for lookup insert/update.
All the packages are running good in SSDT. And when i deployed the project to SSISDB and run the packages all are running successfully. But when i created a job out of that and run the packages, then 3 packages ran successfully and 2 packages failed.
When i opened All Execution Report. I found the following error:
Message
Message Source Name
Subcomponent Name
Process Provider:Error: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80004005. An OLE DB record is available. Source: "Microsoft SQL Server Native Client 10.0" Hresult: 0x80004005 Description:
"Login timeout expired". An OLE DB record is available. Source: "Microsoft SQL Server Native Client 10.0" Hresult: 0x80004005 Description: "A network-related or instance-specific error has occurred while establishing
a connection to SQL Server. Server is not found or not accessible. Check if instance name is correct and if SQL Server is configured to allow remote connections. For more information see SQL Server Books Online.". An OLE DB record is available.
Source: "Microsoft SQL Server Native Client 10.0" Hresult: 0x80004005 Description: "Named Pipes Provider: Could not open a connection to SQL Server [53]. ".
Process Provider
Slowly Changing Dimension [212]
Then i opened Provider package in SSDT and changed the source reading record limit from 4,00,000 to 15,000 in source query and deployed again and run, then the job succeeded. more than 15,000 failed.
And in the 2nd experiment, I removed slowly changing dimension task and implemented normal lookup for insert/update, and set the source reading limit again to 4,00,000 and deployed again and run, then the job succeeded.
Now i am not able to figure out, what exactly is the problem with Slowly changing dimension task for more than 15,00 records in SQL Server Agent Job run?
Can anybody pls help me out.
Thanks
Bikram

Hi Vikash,
As i have mentioned in the above post, below 2 scenarios:
"Then i opened Provider package in SSDT and changed the source reading record limit from 4,00,000 to 15,000 in source
query and deployed again and run, then the job succeeded. more than 15,000 failed.
And in the 2nd experiment, I removed slowly changing dimension task and implemented normal lookup for insert/update, and set the source reading limit again to 4,00,000 and deployed again and run, then the job succeeded."
That means i am able to connect to sql server.
But if i change the 1st scenario and read 4,00,000 records, the job fails and shows the above mentioned error.
Similarly in the 2nd scenario, if i implement SCD look up, the job fails and shows the above mentioned error.
And i am consistently reproducing this.
Thanks
Bikram

SQL Server Agent Jobs- Not running

Similar Messages

Maybe you are looking for