SQL Server Agent

Hello
I am using SQL Server 2012 Express with advanced services however I cannot connect to the SQL Server Agent. The Instance is local and the SQL server Agent service is installed and has the correct permissions.
According to http://www.microsoft.com/en-gb/download/details.aspx?id=29062 SQL server agent should be available.
Reporting services is greyed out and should also be available in this version.
Regards
Ray
SQL Server agent is not present in express edition.YOu might see agent XP in sp_configure but acctual SQL server agent is not present.This feature is not provided by Microsoft for express edition.There is nothing mentioned about agent in link you posted.It
does have reporting feature
Please mark this reply as the answer or vote as helpful, as appropriate, to make it useful for other readers

Similar Messages

Error While executing a SSIS package which contains a script task through SQL Server Agent job

Hi,
I have a SQL Server 2012 SSIS package with a script task along with other tasks [data flow, execute sql tasks ]. When I manually executed the job through BIDS, its completed successfully.
Then I have automated the execution of the package through SQL Server Agent Job. But when I executed the package through SQL Agent job, it runs successfully for all the tasks except script task. When it comes to execute the Script Task, it is getting failed
with the below error message.
"Error: 2012-08-29 12:45:14.67
Code: 0x00000001
Source: Script Task
Description: Exception has been thrown by the target of an invocation.
End Error
DTExec: The package execution returned DTSER_FAILURE (1).
Started: 12:45:10 PM
Finished: 12:45:14 PM
Elapsed: 4.353 seconds
I have installed the SSIS on the 64-bit environment and SSIS service is running. Also I tried to run the job through 32 bit [job option] but I am getting the above error in all cases.
Any help will be greatly appreaciated !
Thanks,
Navin
- naveen.reddy

Hi Arthur,
My script task access the excel files in a network share, refresh them all and save them. When I execute the ETL manually or thru DTEXEC, it is executing successfully. I am facing the issue when I am executing thru SQL Agent Job only. Logging also showing
the same error.
"Error: 2012-08-23 12:45:14.67
Code: 0x00000001
Source: Script Task
Description: Exception has been thrown by the target of an invocation.
End Error
DTExec: The package execution returned DTSER_FAILURE (1).
Started: 12:45:10 PM
Finished: 12:45:14 PM
Elapsed: 4.353 seconds
- naveen.reddy

Reporting Services 2012 for SharePoint and SQL Server Agent "Subscriptions and Alerts"

After installing Reporting Services for SharePoint (Denali) in my test farm, I'm trying to configure the "SQL Server Agent" access for Reporting Services. From Central Admin I'm going to the Reporting Service applicaiton configuration screen and selecting
"Provision Subscriptions and Alerts". I've tried both options on this screen. I've manually executed the "download sql script" in SQL Server, as well as entering a user with SQL sys admin rights on the SQL server into the login fields on the screen.
The role and permissions have been created for the application pool service account, but Reporting Services is still trying to connect with the annonymous login because I'm getting the following alert each time I open the "Provision Subscriptions and Alerts"
screen:
Login failed for user 'NT AUTHORITY\ANONYMOUS LOGON'
The "status" on the screen still shows "SQL Server Agent State cannot be determined". Has anyone else seen this?
Thanks!!

Thanks for your reply!
1) Looks like the new Reporting Services does not run as a Windows Service so it's not listed in the "Configure Service Accounts" pulldown. As a result, I don't see how to set the service account. It's only assigned to an application pool.
I installed it into an existing application pool and that application pool "is" in the list and has a domain service account already assigned.
2) Which users need to be in here in order to configure the "Provision Subscriptions and Alerts" screen? I already have the farm admin account which is the account I use when running Central Admin.
3) As mentioned in #1, I've installed Reporting Services into an existing application pool with other service apps.
4) This link is for Reporting Services 2008 R2 which is very different install process. But I did follow the SQL Server Reporting Services 2012 RC0 installation instructions and the Reporting Services is functioning correctly with no errors.
I'm just not able to configure the sceduling the alerting with interfaces with the SQL Server Agent.
Thanks!

Unable to start SQL server agent service

hi,
We have 2 Node SQL Cluster that was working fine. Then We migrated the Linux DNS to Windows DNS successfully.Now restarted the SQL Server after it when we try to start the SQL Server Agent service its says the below msg while machine name and cluster
entries are in windows dns and resolving the IP to name and name to IP
Error msg: The MSSQLSERVER service on Local Computer started and then stopped. Some services stop automatically if they have no work to do, for example, the Performance Logs and Alerts service." error message.
But whenever we set the Linux DNS Server ip in SQL Servers then it successfully starts the service. Now i want to know why its happening and what are the requirements or DNS entries/SPN which we missing when we migrated the linux DNS to windows
dns
Sagar

I was experiencing this issue or one just like it on one of our SQL clusters (SQL Server 2008 R2, two node).
The fix for us was the database Security Login for: NT SERVICE\SQLAgent$<instancename> was missing. The actual service account assigned to the SQL Agent service was a valid domain account and we had the credentials correct in the service
configuration, so no changes were needed there.
Using SQL Server Management Studio we manually added this BUILT IN account ( NT SERVICE\SQLAgent$<instancename> ) to the instance, and then assigned it user role = sysadmin (to go along with the default role = public).
Once this was done, we tried to restart the clustered SQL Agent service and it started and remained started.
Hope this helps someone, we spent over a day pouring over the installation trying to find the cause.
This worked for me, thanks:-)

Unable to view SQL Server Agent while logged in as user

Hello Everyone,
I have granted SQLAgentUserRole permission to one of the user and using enterprise edition of SSMS. still user is not able to view SQL Server Agent. Any help will be greatly appriciated.

There is no Enterprise Edition of SSMS. There is SSMS Basic and SSMS Complete. Prior to 2012 sp1, only SSMS Basic were available with Express Edition - but as of 2012 sp1 Expredd also offers SSMS Complete. SSMS Complete is selected bu default when you install
SSMS (unless you are prior to 2012 sp1 and are using Express, of course).
However, even SSMS Basic *should* show Agent assuming you have permissions for that. This is hearsay, but from trusted sources. Here is what to do:
Check what is installed for the machine from where you are running SSMS. You can do that using SQL Server Installation Center - see this blog post: http://sqlblog.com/blogs/tibor_karaszi/archive/2011/02/10/what-does-this-express-edition-look-like-anyhow.aspx
(towards the end).
On that machine try both this problematic account as well as an account which is sysadmin. Does the sysadmin account see Agent? If so, you know permissions aren't granted properly. If not, then you know the tool is the problme.
Also try the problematic account from a machine where you know you see Agent normally. Again, this will help you assess whether the problem is the tool (SSMS) or permissions for the account.
Tibor Karaszi, SQL Server MVP |
web | blog

Unable to get SQL Server Agent to run after installing SQL 2012 Standard with SP1

I am unable to get SQL Server Agent to run after installing SQL 2012 Standard with SP1. Log message is as follows:
Attempting to load library 'xplog70.dll' into memory. This is an informational message only. No user action is required.
Failed to verify Authenticode signature on DLL 'C:\Program Files\Microsoft SQL Server\MSSQL11.MSSQLSERVER\MSSQL\Binn\xplog70.dll'.
Error: 17750, Severity: 16, State: 0.
Could not load the DLL xplog70.dll, or one of the DLLs it references. Reason: (null).

Hi JFriedley,
According to your error message, there might three reasons for this issue.
xplog70.dll is corrupt, you need to check if you have any SQL Server running on same file version and same production
edition. If xplog70.dll is corrupt, you can copy it from the new server where agent is running fine to your problematic server.
Native client not installed properly. If you try applying any latest Service Pack or Cumulative Update then check if the SQL Server Agent can start, if that also doesn’t solve issue then try to reinstalling SQL Server Native client from SQL Server setup
files.
There is a similar issue about error 17750, you can review the following article.
http://blogs.lostincreativity.com/sqldba/sqlserver-error-17750-could-not-load-the-dll-xpstar90-dll/
Regards,
Sofiya Li
If you have any feedback on our support, please click here.
Sofiya Li
TechNet Community Support

How do I find out if Sql server Agent's login has rights to a DB?

How do I find out if the SQL server Agent's login has rights to the target DB, that is the DB on which I will be executing a query ? Is there a query for this ?
Thanks.

The job will run with the permissions of owner of the job and only be modified by the owner
or sysadmin role members.
you need get the owner of the job and for example 'ABC' is the owner of the job then pass value in the below query
DECLARE @DBuser_sql VARCHAR(4000)
DECLARE @DBuser_table TABLE (DBName VARCHAR(200), UserName VARCHAR(250), LoginType VARCHAR(500), AssociatedRole VARCHAR(200))
SET @DBuser_sql='
SELECT ''?'' AS DBName,a.name AS Name,
a.type_desc AS LoginType,
USER_NAME(b.role_principal_id) AS AssociatedRole
FROM ?.sys.database_principals a
LEFT OUTER JOIN ?.sys.database_role_members b ON a.principal_id=b.member_principal_id
WHERE a.sid NOT IN (0x01,0x00) AND a.sid IS NOT NULL AND a.type NOT IN (''C'')
AND a.is_fixed_role <> 1 AND a.name NOT LIKE ''##%'' AND
''?'' NOT IN (''master'',''msdb'',''model'',''tempdb'')
ORDER BY Name'
INSERT @DBuser_table
EXEC sp_MSforeachdb @command1=@dbuser_sql
SELECT * FROM @DBuser_table ORDER BY DBName
--SELECT * FROM @DBuser_table where username='ABC' ORDER BY DBName
Useful links
http://www.mssqltips.com/sqlservertip/2317/running-sql-server-agent-with-a-least-privilege-service-account/
http://www.brentozar.com/blitz/jobs-owned-by-user-accounts/
-Prashanth

Error while executing SSIS package which contains Script component through SQL Server Agent Job

Hello All,
I have written one SSIS 2012 package which is fetching records from CSV and put it into staging DB and from staging DB , using SSIS script component task, I am inserting data into Dynamics CRM. So far it is working fine when
I manually execute SSIS package.
but when I run the SSIS package using SQL server agent job, I encounter below error. After seeing below error at step "Insert TLM Headers Script Component " I understand that it is failing at script component which I have used in SSIS package,
but I am not sure what is the cause behind that? please advise.
Error:
Executed as user: domain\user account. Microsoft (R) SQL Server Execute Package Utility Version 11.0.5556.0 for 64-bit Copyright (C) Microsoft Corporation. All rights reserved.    Started: 1:21:41 PM Error: 2015-02-25
13:21:45.94     Code: 0xC0047062     Source: Insert TLM Headers Script Component [205]     Description: System.ServiceModel.FaultException: The server was unable to process the request due to an internal
error. For more information about the error, either turn on IncludeExceptionDetailInFaults (either from ServiceBehaviorAttribute or from the <serviceDebug> configuration behavior) on the server in order to send the exception information back to
the client, or turn on tracing as per the Microsoft .NET Framework 3.0 SDK documentation and inspect the server trace logs.    Server stack trace:      at System.ServiceModel.Channels.ServiceChannel.ThrowIfFaultUnderstood(Message
reply, MessageFault fault, String action, MessageVersion version, FaultConverter faultConverter)     at System.ServiceModel.Channels.ServiceChannel.HandleReply(ProxyOperationRuntime operation, ProxyRpc& rpc)
at System.ServiceModel.Channels.ServiceChannel.Call(String action, Boolean oneway, ProxyOperationRuntime operation, Object[] ins, Object[] outs, TimeSpan timeout)     at System.ServiceModel.Channels.ServiceChannelProxy.InvokeService(IMethodCallMessage
methodCall, ProxyOperationRuntime operation)     at System.ServiceModel.Channels.ServiceChannelProxy.Invoke(IMessage message)    Exception rethrown at [0]:      at Microsoft.SqlServer.Dts.Pipeline.ScriptComponentHost.HandleUserException(Exception
e)    at Microsoft.SqlServer.Dts.Pipeline.ScriptComponentHost.ProcessInput(Int32 inputID, PipelineBuffer buffer)     at Microsoft.SqlServer.Dts.Pipeline.ManagedComponentHost.HostProcessInput(IDTSManagedComponentWrapper100
wrapper, Int32 inputID, IDTSBuffer100 pDTSBuffer, IntPtr bufferWirePacket) End Error Error: 2015-02-25 13:21:45.94     Code: 0xC0047022     Source: Insert TLM Headers SSIS.Pipeline
Description: SSIS Error Code DTS_E_PROCESSINPUTFAILED. The ProcessInput method on component "Script Component" (205) failed with error code 0x80131501 while processing input "Input 0" (215). The identified component returned an error
from the ProcessInput method. The error is specific to the component, but the error is fatal and will cause the Data Flow task to stop running. There may be error messages posted before this with more information about the failure. End Error
DTExec: The package execution returned DTSER_FAILURE (1). Started: 1:21:41 PM Finished: 1:21:45 PM Elapsed: 4.009 seconds. The package execution failed. The step failed.
Thanks
Pankaj

domain\user account has not proper rights
That being said, often SSIS jobs require a proxy to be runnable and this is how you make one up
http://www.mssqltips.com/sqlservertip/2163/running-a-ssis-package-from-sql-server-agent-using-a-proxy-account/
Arthur
MyBlog
Twitter

Error when execute a package from SQL Server Agent

We have the next problem:
When we execute a package from a Job of SQL Server agent, it shows the success messege, but reviewing the results, the package didnt do all the tasks.
When we run it mannually by MSIS the package, it shows the success message and it works fine.
The workflow of the package is :
1) Shrink the databases (executing a sql file)
2) Backup the databases (Back up Database task of MSIS)
3) Rename the files to .BAK extension (by the Foreach loop container and fyle system task)
4) Execute command to compress the it (by a .bat)
5) Move the compress file to another location (by another Foreach loop)
Manually run correct, but when is a a SQL AGent Job that execute the package it does only the first 2 steps.
we are ussing Microsoft SQL Server 2008 R2 (SP1) - 10.50.2500.0 (X64) Jun 17 2011 00:54:03 Copyright (coffee) Microsoft Corporation Enterprise Edition (64-bit) on Windows NT 6.1 <X64> (Build 7601: Service Pack 1)
We are using a user with administrator privilegies
Cheers

Can you check if account running package has proper access. You may need to define a proxy account for that.
See
http://www.databasejournal.com/features/mssql/article.php/3789881/Proxy-Accounts-in-SQL-Server.htm
http://gqbi.wordpress.com/2014/01/30/setting-up-a-proxy-account-to-run-sql-server-integration-services-ssis-2012-packages/
Please Mark This As Answer if it helps to solve the issue Visakh ---------------------------- http://visakhm.blogspot.com/ https://www.facebook.com/VmBlogs

Error: Failed to acquire connection while exporting a file using SSIS package through SQl Server Agent job.

Hi Team,
I am running a sql server job which is loading data to a sharepoint document library.File is an excel format and is getting loaded
when executed through SSDT solution .But when i am using an SQL Agent job to pick up the file it doesnt get the path and agent job fails with the error "Failed to acquire connection".I have deployed the SSIS Package through SQL Server 2012 deployment
methodologies.
I am not able to trace the error of loading data from a sharepoint library.library. Sql agent jobs works fine when i give local path.The
account which is running the sql agent job is the same who has access to document library.I also tried to run the job through proxy account. I am using a xml configuraion to store my credentials.I am able to palce the same file to a network drive in the same
server through sql server agent job. The only problem is when I am trying to load the file to a sharepoint folder.
Thanks,
Arsa..

Is that the WebDAV method that you are suggesting here to map the n/w drive?
Its kind of webdav but you will be using windows nw drive to store data
yes, I am able to create the file to D: , but didn't check with the C:.
Try with c:, as c: require special permisssions
If this helped you resolve your issue, please mark it Answered

SSIS fails to load files from network when executed via SQL server Agent (SQL server 2008 R2 SP 2)

Hi All,
I have a simple SSIS package that reads a flat file and copies it into a SQL Server table.
When the flat fiel is on the C drive I have no problem runnign this package from SQL Server Agent, but as soon as I update the path to a network location the package only works when I run it manually, but fails when is executed via the SQL Server agent job.
The error says "cannot open the datafile", while the datafile location is valid.
Is this a kind of limitation of a SQL Server Agent that only local files are allowed to be processed?
Thanks,
Andrei
SSIS question

Hi All,
Thanks for your responses.
I configured the SQL agent service to use my domain account with which I have no porblems accessing the folder. However the issue persisted.
Thanks,
Andrei
SSIS question

SQL Server Agent Failed to decrypt protected XML node

I'm getting the below error when trying to run sql server agent to run an SSIS package. I've updated folder security to allow sql server agent access, but cannot get the package to execute within SQL Management Studio. The package runs find in SSIS.
11.0.2100.60 for 64-bit Copyright (C) Microsoft Corporation. All rights reserved. Started: 12:12:00 PM Error: 2014-11-30 12:12:02.65 Code: 0xC0016016 Source: LoadStgProspects Description:
Failed to decrypt protected XML node "DTS:Password" with error 0x8009000B "Key not valid for use in specified state.". You may not be authorized to access this information. This error occurs when there is a cryptographic error. Verify that
the correct key is available. End Error Error: 2014-11-30 12:12:03.88 Code: 0xC0016016 Source: LoadStgProspects Description: Failed to decrypt protected XML node "DTS:Password" with error
0x8009000B "Key not valid for use in specified state.". You may not be authorized to access this information. This error occurs when there is a cryptographic error. Verify that the correct key is available. End Error Error: 2014-11-30
12:12:04.74 Code: 0xC0209303 Source: LoadStgProspects Connection manager "Excel Connection Manager" Description: The requested OLE DB provider Microsoft.Jet.OLEDB.4.0 is not registered. If the 64-bit driver
is not installed<c/> run the package in 32-bit mode. Error code: 0x00000000. An OLE DB record is available. Source: "Microsoft OLE DB Service Components" Hresult: 0x80040154 Description: "Class not registered".
End Error Error: 2014-11-30 12:12:04.74 Code: 0xC020801C Source: Load prospect files Prospect xls [231] Description: SSIS Error Code DTS_E_CANNOTACQUIRECONNECTIONFROMCONNECTIONMANAGER. The AcquireConnection
method call to the connection manager "Excel Connection Manager" failed with error code 0xC0209303. There may be error messages posted before this with more information on why the AcquireConnection method call failed. End Error Error:
2014-11-30 12:12:04.74 Code: 0xC0047017 Source: Load prospect files SSIS.Pipeline Description: Prospect xls failed validation and returned error code 0xC020801C. End Error Error: 2014-11-30 12:12:04.74
Code: 0xC004700C Source: Load prospect files SSIS.Pipeline Description: One or more component failed validation. End Error Error: 2014-11-30 12:12:04.74 Code: 0xC0024107 Source:
Load prospect files Description: There were errors during task validation. End Error Error: 2014-11-30 12:12:04.74 Code: 0xC00220DE Source: LoadStgProspects Description: Error
0xC0012050 while loading package file "C:\Users\Jim\Documents\Visual Studio 2010\Projects\SSISTraining\SSISTraining\LoadStgProspects.dtsx". Package failed validation from the ExecutePackage task. The package cannot run. . End Error DTExec:
The package execution returned DTSER_FAILURE (1). Started: 12:12:00 PM Finished: 12:12:04 PM Elapsed: 4.337 seconds. The package execution failed. The step failed.,00:00:04,0,0,,,,0

Hi selfdestruct80,
According to your description, you created SSIS package and it works fine. But you got the error message when the SSIS package was called from a SQL Server Agent job.
According to my knowledge, the package may not run in the following scenarios:
The current user cannot decrypt secrets from the package.
A SQL Server connection that uses integrated security fails because the current user does not have the required permissions.
File access fails because the current user does not have the required permissions to write to the file share that the connection manager accesses.
A registry-based SSIS package configuration uses the HKEY_CURRENT_USER registry keys. The HKEY_CURRENT_USER registry keys are user-specific.
A task or a connection manager requires that the current user account has correct permissions.
According to the error message, the SSIS Package ProtectionLevel property to EncryptSensitiveWithPassword as ArthurZ mentioned. To solve the problem, you need to go to Command Line tab, manually specify the paassword in SQL Agent Job with the command like below:
/FILE "\"C:\Users\xxxx\Documents\SQL Server Management Studio\SSIS\Package.dtsx\"" /DECRYPT somepassword /CHECKPOINTING OFF /REPORTING E
If you have any more questions, please feel free to ask.
Thanks,
Wendy Fu
Wendy Fu
TechNet Community Support

Problem Running SSIS Package with a SQL Server Agent

SQL Server: SQL Server 2012
VS: Visual Studio 2012
Hello,
      I have been having a problem running SSIS packages by using a SQL Server Agent job. I first created these SSIS packages in a separate IS project in Visual Studio. I imported the packages to the Integration Services (Package
Store) instance on my SQL Server and tried to create a job that would run them from there.
      At first I read around about needing a proxy account to allow the agent/packages to access the file system since these packages are importing data from a flat file in the SQL database. So I created a temporary admin user to
use as the user for the agent. I did this by going to Services.msc on the server and linked the account the agent's "logon as". Then arose another issue where I am getting an error about using the incorrect type for my connection managers.
The connection manager "TestFile" is an incorrect type. The type required is "OLEDB". The type available to the component is "FLATFILE". Source: Data Flow Task Flat File Destination [2]     Description:
Cannot open the datafile "O:\*****\Success.txt"
I am not sure what this even means as I am getting this error even with a test package that doesn't do anything with the database. I have just two flat file connection managers in this test project one for grabbing the source file and one for
creating the new test file.
I am not sure what to do.
Thanks in advance,
Matt

I accidently created two posts. The newest one has the details.
I did not mean to.
SQL Server: SQL Server 2012
VS: Visual Studio 2012
Hello,
      I have been having a problem running SSIS packages by using a SQL Server Agent job. I first created these SSIS packages in a separate IS project in Visual Studio. I imported the packages to the Integration Services (Package
Store) instance on my SQL Server and tried to create a job that would run them from there.
      At first I read around about needing a proxy account to allow the agent/packages to access the file system since these packages are importing data from a flat file in the SQL database. So I created a temporary admin user to
use as the user for the agent. I did this by going to Services.msc on the server and linked the account the agent's "logon as". Then arose another issue where I am getting an error about using the incorrect type for my connection managers.
The connection manager "TestFile" is an incorrect type. The type required is "OLEDB". The type available to the component is "FLATFILE". Source: Data Flow Task Flat File Destination [2]     Description:
Cannot open the datafile "O:\*****\Success.txt"
I am not sure what this even means as I am getting this error even with a test package that doesn't do anything with the database. I have just two flat file connection managers in this test project one for grabbing the source file and one for
creating the new test file.
I am not sure what to do.
Thanks in advance,
Matt

SQL Server Agent Jobs error for Slowly changing dimension

Hi,
I have implemented Slowly changing dimension in 5 of my packages for lookup insert/update.
All the packages are running good in SSDT. And when i deployed the project to SSISDB and run the packages all are running successfully. But when i created a job out of that and run the packages, then 3 packages ran successfully and 2 packages failed.
When i opened All Execution Report. I found the following error:
Message
Message Source Name
Subcomponent Name
Process Provider:Error: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80004005. An OLE DB record is available. Source: "Microsoft SQL Server Native Client 10.0" Hresult: 0x80004005 Description:
"Login timeout expired". An OLE DB record is available. Source: "Microsoft SQL Server Native Client 10.0" Hresult: 0x80004005 Description: "A network-related or instance-specific error has occurred while establishing
a connection to SQL Server. Server is not found or not accessible. Check if instance name is correct and if SQL Server is configured to allow remote connections. For more information see SQL Server Books Online.". An OLE DB record is available.
Source: "Microsoft SQL Server Native Client 10.0" Hresult: 0x80004005 Description: "Named Pipes Provider: Could not open a connection to SQL Server [53]. ".
Process Provider
Slowly Changing Dimension [212]
Then i opened Provider package in SSDT and changed the source reading record limit from 4,00,000 to 15,000 in source query and deployed again and run, then the job succeeded. more than 15,000 failed.
And in the 2nd experiment, I removed slowly changing dimension task and implemented normal lookup for insert/update, and set the source reading limit again to 4,00,000 and deployed again and run, then the job succeeded.
Now i am not able to figure out, what exactly is the problem with Slowly changing dimension task for more than 15,00 records in SQL Server Agent Job run?
Can anybody pls help me out.
Thanks
Bikram

Hi Vikash,
As i have mentioned in the above post, below 2 scenarios:
"Then i opened Provider package in SSDT and changed the source reading record limit from 4,00,000 to 15,000 in source
query and deployed again and run, then the job succeeded. more than 15,000 failed.
And in the 2nd experiment, I removed slowly changing dimension task and implemented normal lookup for insert/update, and set the source reading limit again to 4,00,000 and deployed again and run, then the job succeeded."
That means i am able to connect to sql server.
But if i change the 1st scenario and read 4,00,000 records, the job fails and shows the above mentioned error.
Similarly in the 2nd scenario, if i implement SCD look up, the job fails and shows the above mentioned error.
And i am consistently reproducing this.
Thanks
Bikram

SQL Server Agent and SSIS

I created a SSIS package that litterally just export a view onto a server. The database, ssis and location are all on the same server. When I run the SSIS package in SSIS works perfectly. When I run it in SQL it doesnt work. I have read way to many articles
trying to figure out how to fix this. The best was something about a proxy. I really just want to run the package through as a JOb through SQL Server Agent. Any directions would be great.
Message
Executed as user: NT Service\SQLSERVERAGENT. Microsoft (R) SQL Server Execute Package Utility Version 11.0.2100.60 for 64-bit Copyright (C) Microsoft Corporation. All rights reserved. Started: 3:15:00 PM Error: 2015-03-05
15:15:00.41 Code: 0xC0011007 Source: {A9456201-8A74-44C9-839F-1CD3CC02637F} Description: Unable to load the package as XML because of package does not have a valid XML format. A specific XML parser error will
be posted. End Error Error: 2015-03-05 15:15:00.41 Code: 0xC0011002 Source: {A9456201-8A74-44C9-839F-1CD3CC02637F} Description: Failed to open package file
"C:\Users\lasadmin\Documents\Visual Studio 2010\Projects\Integration Services Project1\Integration Services Project1\Package.dtsx"
due to error 0x80070005 "Access is denied.". This occurs when loading a package and the file cannot be opened or loaded correctly into the XML document. This can be the result of specifying an incorrect file name when calling LoadPackage
or the specified XML file has an incorrect format. End Error Could not load package "C:\Users\Documents\Visual Studio 2010\Projects\Integration Services Project1\Integration Services Project1\Package.dtsx" because of error 0xC0011002.
Description: Failed to open package file "C:\Users\Documents\Visual Studio 2010\Projects\Integration Services Project1\Integration Services Project1\Package.dtsx" due to error 0x80070005 "Access is denied.". This occurs when
loading a package and the file cannot be opened or loaded correctly into the XML document. This can be the result of specifying an incorrect file name when calling LoadPackage or the specified XML file has an incorrect format. Source: {A9456201-8A74-44C9-839F-1CD3CC02637F}
Started: 3:15:00 PM Finished: 3:15:00 PM Elapsed: 0.015 seconds. The package could not be found. The step failed.
thanks
bryan

No I am still a bit confused.
1.) I created both Jobs as the admin.
2.) The NT Service\SQLSERVERAGENT is by default for whatever reason is running the job when I scheduled
it.
3.) Just so that I could try and run the job I tried to follow the article that was given in the first post. I got to the second script and I get the below error.
Msg 14529, Level 16, State 1, Procedure sp_add_proxy, Line 45
Proxy "ARSHADALI-LAP\SSISProxyDemoUser" is not a valid Windows user.
Msg 14262, Level 16, State 1, Procedure sp_verify_proxy_identifiers, Line 51
The specified @proxy_name ('SSISProxyDemo') does not exist.
Is there a more simpler way this seems almost like over kill.
bryan
Is that domain machine or is it in work group?
Please Mark This As Answer if it solved your issue
Please Vote This As Helpful if it helps to solve your issue
Visakh
My Wiki User Page
My MSDN Page
My Personal Blog
My Facebook Page

SSIS package is failing when using SQL server agent

I am trying to execute an SSIS package through an SQL server agent and receiving the following error:
Message
Executed as user: serv-syst\SYSTEM. Microsoft (R) SQL Server Execute Package Utility Version 10.50.1600.1 for 32-bit Copyright (C) Microsoft Corporation 2010. All rights reserved.    Started: 1:56:53 PM Error: 2014-04-21
13:56:54.81     Code: 0xC0202009     Source: PACKAGEWMG Connection manager "DestinationConnectionOLEDB"     Description: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred.
Error code: 0x80040E4D. An OLE DB record is available. Source: "Microsoft SQL Server Native Client 11.0" Hresult: 0x80040E4D Description: "Login failed for user 'hsnzha'.". End Error Error: 2014-04-21
13:56:54.82     Code: 0xC00291EC     Source: Drop table(s) SQL Task 1 Execute SQL Task     Description: Failed to acquire connection "DestinationConnectionOLEDB". Connection may not be configured
correctly or you may not have the right permissions on this connection. End Error Error: 2014-04-21 13:56:54.82     Code: 0xC0202009     Source: PACKAGEWMG Connection manager "DestinationConnectionOLEDB"
Description: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80040E4D. An OLE DB record is available. Source: "Microsoft SQL Server Native Client 11.0" Hresult: 0x80040E4D Description: "Login
failed for user 'hsnzha'.". End Error Error: 2014-04-21 13:56:54.82     Code: 0xC00291EC     Source: Preparation SQL Task 1 Execute SQL Task     Description: Failed to acquire connection
"DestinationConnectionOLEDB". Connection may not be configured correctly or you may not have the right permissions on this connection. End Error DTExec: The package execution returned DTSER_FAILURE (1). Started: 1:56:53 PM
Finished: 1:56:54 PM Elapsed: 0.844 seconds. The package execution failed. The step failed.
My SSIS package retrieves a excel file and saves the vales into an SQL table. When I run the package by itself in my server it works fine but when it's called from a SQL agent, it fails with the above error. Please help me resolve it.

That's the issue. If it's a SQL login the password cannot be retrieved by account executing the package from the job which is why login fails. In that case best thing would be set password in job properties or pass it using configuration created in the package
See
HTTP://blogs.msdn.com/b/runeetv/archive/2011/12/22/ssis-package-using-sql-authentication-and-dontsavesensitive-as-protectionlevel.aspx
Please Mark This As Answer if it helps to solve the issue Visakh ---------------------------- http://visakhm.blogspot.com/ https://www.facebook.com/VmBlogs
My package is saved with ServerStorage which appears under \\server\Stored Packages\MSDB\PACKAGE and when I run it, it works fine.
There is a new error message that I get now after following the steps from the link...
Message
Microsoft (R) SQL Server Execute Package Utility
Version 10.50.1600.1 for 32-bit
Copyright (C) Microsoft Corporation 2010. All rights reserved.
Started: 3:34:22 PM
Error: 2014-04-21 15:34:23.82
   Code: 0xC0202009
   Source: PACKAGEWMG Connection manager "SourceConnectionExcel"
   Description: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80004005.
An OLE DB record is available. Source: "Microsoft Office Access Database Engine" Hresult: 0x80004005 Description: "Unexpected error from external database driver (????????).".
End Error
Error: 2014-04-21 15:34:23.82
   Code: 0xC020801C
   Source: Data Flow Task 1 Source - 'Contact Center$' [1]
   Description: SSIS Error Code DTS_E_CANNOTACQUIRECONNECTIONFROMCONNECTIONMANAGER. The AcquireConnection method call to the connection manager "SourceConnectionExcel" failed with error code 0xC0202009. There may be error
messages posted before this with more information on why the AcquireConnection method call failed.
End Error
Error: 2014-04-21 15:34:23.82
   Code: 0xC0047017
   Source: Data Flow Task 1 SSIS.Pipeline
   Description: component "Source - 'Contact Center$'" (1) failed validation and returned error code 0xC020801C.
End Error
Error: 2014-04-21 15:34:23.82
   Code: 0xC004700C
   Source: Data Flow Task 1 SSIS.Pipeline
   Description: One or more component failed validation.
End Error
Error: 2014-04-21 15:34:23.82
   Code: 0xC0024107
   Source: Data Flow Task 1
   Description: There were errors during task validation.
End Error
DTExec: The package execution returned DTSER_FAILURE (1).
Started: 3:34:22 PM
Finished: 3:34:23 PM
Elapsed: 1.25 seconds

SQL Server Agent

Similar Messages

Maybe you are looking for