SQL Server Analysis Services not showing in Services on Server on Central Admin
Hi All
We have a Sharepoint 2013 farm set up (2xApp, 2xWeb, 1xSQL) and we have a number of excel powerpivot workbooks deployed and refreshing.
This was all working fine, until recently when our Excel 2013 Tabular workbooks stopped refreshing manually. This had worked fine in the past, but now is giving the following error:
"An error occurred during an attempt to establish a connection to the external data source"
The first thing I wanted to check was that the "SQL Server Analysis Services" was started in Services on Server within Central Admin. However when i navigated to check this, I noticed that the service was no longer listed at all.
I checked the Analysis services for Powerpivot is running on the server and it is registered within Data Models on Excel services.
There was recently some Windows updates that were applied to the servers, but i'm pretty confident that the refresh was working after these, however i cant rule out 100%.
Hoping for any advice on what I can check/do here?
Thanks!
When i try to run that tool i actually get a strange error (we are running Enterprise Edition):
"PowerPivot for SharePoint 2013 Configuration is missing prerequisites: SharePoint 2013 Enterprise Edition is required.
For more information go to http://go.microsoft.com/fwlink/?LinkId=247828.
Please address the validation failures and try again."
Yes it looks like on the server hosting PowerPivot analysis server that a number of windows updates got applied. However
none look to be specifically about for SQL, and the 2 cumulative ones are for IE and Active X for Windows Server.
Similar Messages
-
Front End Server in pool not showing as possible registrar server
Hi All,
We have recently another server to our front end pool. At first we had only one server, and now we have added the second server to the pool.
However doing a get-csuserpoolinfo command we are getting these result
Get-CsUserPoolInfo sip:testuser2@domain
Identity :
testuser2@domain
PrimaryPoolFQDN : lyncpool.domain
BackupPoolFQDN :
UserServicesPoolFQDN : lyncpool.domain
PrimaryPoolMachinesInPreferredOrder : {fe01.domain}
BackupPoolMachinesInPreferredOrder : {}
PrimaryPoolPrimaryRegistrar : fe01.domain
PrimaryPoolBackupRegistrars : {}
PrimaryPoolPrimaryUserService : fe01.domain
PrimaryPoolBackupUserServices : {}
BackupPoolPrimaryRegistrar :
BackupPoolBackupRegistrars : {}
BackupPoolPrimaryUserService :
BackupPoolReplicaUserServices : {}
Now we have fe02 deployed as well however this is not displayed for this testuser or any other user in our deployment. This is also causing the problem that if fe01 is not available the client will not automatically try to connect to fe02.
Thank you for your support!
JosephThe Replica Instances for Routing Service does not add the second server fe01.domain, however for the other replicas the other server is added.
Get-CsPoolFabricState -PoolFqdn lyncpool.domain
Replica Instances for MCUFactory Service
Address: fe01.domain - Primary: 6 Secondary: 0
Address: fe02.domain - Primary: 0 Secondary: 6
Replica Instances for ConferenceDirectory Service
Address: fe01.domain - Primary: 1 Secondary: 0
Address: fe02.domain - Primary: 0 Secondary: 1
Replica Instances for Routing Service
Address: fe01.domain - Primary: 7 Secondary: 0
Local Groups: Primary: 7 Secondary: 0
Remote Groups: Primary: 0 Secondary: 0
Replica Instances for LYSS Service
Address: fe01.domain - Primary: 7 Secondary: 0
Address: fe02.domain - Primary: 0 Secondary: 7
Global Service Count Summary:
Fqdn: fe01.domain - Primary: 21 Secondary: 0
Fqdn: fe02.domain - Primary: 0 Secondary: 14 -
Service Registry : Services does not show under Service definitions..
Hi All,
I am new to PI ..
My PI system is 7.11 ..DB DB2
Query is that when i start PI tools and click on service registry under service definitions it does not show any services..
Do i have to publish services so that it can be accessed from the mentioned location..or is there any other configuration that i need to execute..
Regards
Sohal....Hi Sohal,
You may want to refer to:
#1267817 - Configure Services Registry proxy (ServicesRegistrySi)
Also, check the following links that may aid you with that:
http://help.sap.com/saphelp_nwpi71/helpdata/en/46/94dd02c7b915ebe10000000a114a6b/frameset.htm
and
http://help.sap.com/saphelp_nwpi71/helpdata/EN/44/cc8fd368c873dfe10000000a11466f/frameset.htm
Regards,
Caio Cagnani -
Hi,
a wired glitch in my SSIS 2005 package in production server where the FTP folder location is not showing but its existing in my laptop version
EX: - t01/app/_res folder
When i open the package from the production server "_res" is not showing within the remote path in the file transfer task.
but "_res" folder is shown in my development environment.
I tried with winscp FTP software in the production sever , and was able to access the "_res" location through the FTP software. What could this be? a BIDS sofitware version issue???
VS 2005 Version in development server
-Is 8.0.50727.42(Premier Partner ENU) .net framework is 4.5.1
VS 2005 Version in production server
-Is 8.0.50728 (Premier Partner ENU) .net framework is 2.0 Service pack 2.0
thanks.When you open the package on the production server, do you mean opening it with your Windows account from BIDS on that server? Ff the ftp connection in the package has a password it will have been stored in your laptop when you designed the package. when
you deployed the pacakge on the server as a file and open it with BIDS then the password will be gone. You would have to go into the package ftp connection properties, reassign your password and save the connection and the package again.
Jan D'Hondt - SQL server BI development -
Client installation is not successful & not showing activity in SCCM Server 2012
Environment : SCCM Server 2012 Configured successfull and installed clients using client push method , successfully Completed . I have seen Active, And push software to corresponding clients . installed successfully
We have internal & external networks in our environment . Internal network in data center , the sccm server is also in data center . All client systems is getting software's from sccm in internal network ( done successful) .
i have opened the ports in firewall 135,139,80,443,445, etc (TCP,UDP)
When iam trying to push the client from SCCM server to external network client system. it is not installing the Ccm setup ,
not showing "Active" in SCCM server .
I have added a Account in Client push , Same account i added in Client system Administrator group .
Info : All systems in Device collection
please updated the suggestions, to solve this issue .
Thanks in advanceClient push requires more than just those handful of ports as it uses RPC and SMB to push the initial required files -- thus, you need to open the dynamic high ports required for RPC.
You can easily see this activity in the ccm.log.If you are unable/unwilling to open the RPC high ports, then you should choose an alertnate client install method.
Jason | http://blog.configmgrftw.com -
Server Admin - iCal service not showing?
I've got iCal enabled (and it's running) but the service doesn't show up on the Server Admin. I need it so I can configure the service. Any idea why it wouldn't show up in here? Thanks!
GreatGeek,
If I follow your question correctly, you are using Server Admin.app.
Apple moved the iCal GUI into the Server.app.
They split up the services into two control apps for now from what used to be one. Maybe in time they will be consolidated again...
-Erich -
OS X Server Calendar Service not showing any events after upgrade
Hello,
I recently upgraded my Late 2012 Mac Mini Server that was running Mountain Lion and Server 3.2 to OS X Yosemite and Server 4.0. After the upgrade I got a lot of calls from users who state that all of their calendar items have been erased from their iPhones and iPads. I also noticed the same thing on my calendar. Does anyone know how I would restore those times? Has anyone noticed the same thing after an upgrade?
Thanks!Correction... I am running Server 2.2.4.
-
Wily Enterprise Manager Service not Started in Windows 2008 Server
Hi All,
Our Solution Manager is in EHP1 SP21 and OS-Windows 2008 Server.
We installed Wily Enterprise Manager 8.0. and found 1 non-fatal error in the installation log. The service is not starting.
However it works fine for Windows 2003 Server.
Can anyone encountered with the same kind of problem?
This is the latest log file information:
Summary
Installation: Successfulwith errors.
387 Successes
0 Warnings
1 NonFatalErrors
0 FatalErrors
Action Notes:
Execute ANT Script: Script:
Status: ERROR
Additional Notes: ERROR - E:\usr\sap\ccms\wilyintroscope\install\em.installer.exec.ant15.xml:425: Timeout: killed the sub-process
Thank you in advance.
Regards
SanjaiNote 1273028 - Introscope 8 Release Notes resoved this issue.
Known problems in all Releases 8.x
2. Windows Server 2008 is not yet officially supported by CA Wily for the Enterprise Manager. If you want to install the Enterprise Manager anyway, set the "Windows 2003 compatibility mode" for the installer before launching it. To activate this mode, right click on the installer.exe file in the Windows Explorer, select tab "Compatibility", activate the check box for compatibility mode and select Windows 2003. If you do not set this, the installer will consider your OS as Unix and install shell scripts (no suffix) instead of batch files (.bat) and leave out some files for Windows Service registration.
If the windows service still fails to start please check if files ServiceWrapper.jar and ServiceWrapper.dll are present in folder lib. If not download them from attachment of this note.
The service should start although giving an error message regarding the ServiceWrapper.dll. You can ignore this error. -
IIS service not showing when I use the get-exchangeCertificate | fl cmdlet
Hello All,
I just installed a 3rd party digital certificate to my Exchange 2010 via powershell then assigned the 4 services IIS, pop, smtp, imap but when I use the get-exchangecertificate | fl cmdlet the IIS service is not showing.The rest of the services were fine.
During the process of installing the certificate via powershell, I got a message that says: Do you want to enforce SSL communication on the root web
site? If not, rerun the cmdlet with the -DoNotRequireSSL parameter. I said No to all and the operation continued. By the way, I also invoke the iisreset /restart right after installing the digital
certificate. I then proceeded to install my root certificate and intermediate certificates. All were imported successfully via certificate snap-in. When I access the exchange 2010 EMC console, the status for the Exchange Certificate still says pending certificate
signing request. Not sure if that is related at all to the fact that IIS service is not showing amongst the assigned services listed. Any idea why IIS service is not in the list of assigned services for Exchange certificate?? Can I re-run my powershell and
repeat my steps, but this time just assigned IIS service alone? Or should I re-run powershell altogether and assign all 4 services again??? Also, what about the pending certificate signing request in the EMC console should I process and complete the request??
Any advise is appreciated. Let me know please.
Thanks!
Lotusmail1
Franz GarciaHi Lotusmail1,
Please run the following command to just assign IIS service to this third-party certificate (using certificate 5113ae0233a72fccb75b1d0198628675333d010e as a example), then run Get-ExchangeCertificate to check it again:
Enable-ExchangeCertificate -Thumbprint 5113ae0233a72fccb75b1d0198628675333d010e -Services IMAP,POP,IIS,SMTP
Regards,
Winnie Liang
TechNet Community Support -
Critical Services Not Starting Automatically & Access to Server occasionally dropping out
For the last few months we have been trying to resolve an issue where access to files on the server (SBS2011 - running domain services, exchange, etc) get so slow or just unresponsive. Logging onto the server is also not possible till it starts responding
again.
We also found that when the server starts, the Netlogon services does not start automatically event though it is set to auto start. There are a number of other services mainly exchange services that do not start as well but it seems this may be due to the
net service not starting.
We have re-installed the OS but this does not seem to have fixed the issue. The environment is a mix of the SBS2011 server, two Windows Server 2003 boxes - one running Terminal Services. The other was being used for SAP but no longer in use. The clients
are mainly XP with a few Windows 7 machines. We are in the process of planning the replacement of the XP machines.You re-installed SBS2011? - that seems rather drastic. Did you maintain your domain or just set it all up again?
This sounds like a DNS issue but have a look at the event viewer and google/post the Event ID and Source. Given those two you can start to track down the cause and possible fixes at www.eventid.net. Just be aware that SBS2011 has a lot of
"normal" event errors, see http://support.microsoft.com/kb/2483007
You should also run the SBS best practice analyzer and maybe run the "Fix my network" wizard in the SBS console. Also make sure SBS is the DHCP server for the network.
-- Al -
OracleOraDb10g_home1TNSListener service is not showing windows service
Hi,
I have just installed the oracle 10g(10.1.0) with sample database. I am trying to connect the database from client I got TNS : No listener , SO I have checked in the database I am wondering that the OracleOraDb10g_home1TNSListener service was not available in the controlpanel-services window.
I am trying to start manually using lsnrctl but no luck.
Any one who knows what could be the problem??? or How to enable the service in contorl panel service of windows??
Thanks,
Priya.How is this thread different from your other thread?
How register a LISTENER in WIndows 2003 server. -
Sap Service Manager is not showing SAP Services
We performed a migration from Oracle 8.0.4 to Oracle 8.1.7.1 on a WIN NT 4.0 server with a SAP 30F system release and kernel 31I to 31I_COM.
The migration of the db to 8.1.7.4 worked well, but after that, the message server and the dispatcher services of the SAP Service Manager have disappeared, so we couldn´t start the SAP System. We changed the kernel to 31I_COM but the problem wasn´t solved.
I tried to start the SAP System from a cmd command line, but it doesn´t work.
We have installed a MMC but we don´t find the SAP Instance to add in the list.
We excecuted the command sapstartsrv.exe (according to the problem reported ) but after this, the SAPPRD_00 service has disappeared too, so we have installed the Central Instance again so that the service appear, but the problem with the SAP Service Manager and the MMC was still the same. We decided to excecute the command again and rebooted the system, but when we rebooted the server the SAPPRD_00 service have disappeared as well from the Services List.
This command sapstartsrv.exe never finished ok because it said that the user SAPSevicePRD didn´t exists, but the account exists.
Any Idea About it???
Thanks in Advance
MarianoHi Yan Li,
So based on your above suggestion, If the services are already managed / monitored by a specific
management pack those services will not appear here in the Wizard while creating this type of a Management pack object alert right ?
If that is the case why does not the same reflect here in the operations console in the Services monitor
TAB ?
Gautam.75801 -
Compressor Service not showing up in Qadmin
hi everyone ... for some reason my Compressor Services are not showing up in Qadministrator. They were previously working fine, but now they aren't working ... I have the Qmaster settings as -Services only- and tick box for Compressor Share and Managed. One of my machines is set as cluster controller too.
I hit start sharing and it says that it is sharing, but then nothing comes up in Qadmin for it...
However, if I tick the boxes for Rendering service, these ones do show up...
any ideas? thanksNevermind, I figured it out. For some reason if you choose 'QuickTime Export Components' it won't show up in FCPX but other custom settings will. Oh well.
-
Code of Conduct Service not showing in ESS
The Code of Conduct Service PDF is not showing up, it appears as if it's loading and eventually stop without showing, No error is given it just doesn't show up on the page. The Code of conduct form has been created in ERP using Adobe Form Designers and credential for Adobe Document Services have been installed as well.
The steps to reproduce is:
Logon to ESS
-> Corporate Information -> Code of Conduct Service
Thanks.is your ads working correctly?
can you launch the form correctly in backend using SFP?
etc check the ads config or take a ads trace -
Analysis does not show all rows returned by SQL
Hi.
OBIEE 11.1.1.7.0
I have a strange problem. I have a simple table that should return customer number and sales. The report will show all of the sales, but it does not show all the customer numbers. The SQL that OBIEE creates does return all of the customer numbers. When I remove the sales and just include the customer number, the report only shows a couple of the customer numbers (it should show several hundred).
I guess what I'm looking for is any advice for how to debug this. I have spent about 3 days on this problem, so I have tried to look at it from every angle (data, RPD, report).
Any suggestions are appreciated.
Thank you.Thank you for your reply.
New development. The issue has to do with a descriptor ID column. The customer number column is a varchar field and I set the descriptor ID column to the column_ID field. When I remove the descriptor ID setting, I received all custom numbers.
Maybe you are looking for
-
How to eliminate subtitles when streaming Netflix through Apple TV?
When streaming movies from Netflix through Apple TV, sub-titles appeared and we canot find a menu or symbol to click to eliminate the sub titles. They carry over to our next item. How can I eliminate the sub titles. (This is only a problem with App
-
Exchange OWA 2010 is not showing events on calendar correctly.
I have Exchange 2010 setup on 2 servers running Windows 2008 R2 Standard. Some users' OWA accounts, (mine included) are working just fine. Other users, are showing just a blank gray box on the calendar. Even if there are multiple events that day,
-
How do i transfer all songs from computer to iphone
I need listen my own music . how do i transfer from computer to iphone 5?
-
Hi all of you Could any suggest me how to fill the segment field in automatic postings like AFAB and AIBU as Document splitting is activated and we dont have assignment the segment in PCtr master data. Thanks & Regards Ramki
-
Error General Security Access denied : in creating timesheet for a resource using PSI C#
I'm trying to create timesheet for a resource using Method timeSheetSvc.CreateTimesheet(timeSheetDs, svc_Timesheet. PreloadType.Default) get error : [System.ServiceModel.FaultException] = {"ProjectServerError(s) LastError=GeneralSecurityAccessDenied