Sql server configuration manager remote procedure call failed(0x800706be)
Hi,
My Sql Server Management Studio working well. But When I open Sql server configuration manager I Got an error
“Remote procedure call failed (0x800706be)”
I tried Goggling the problem and solve it but I am not getting any valuable
solution. Is anyone solve this problem
I attach snap here
MySql Server Details:
Microsoft SQL Server 2008 R2 (RTM) - 10.50.1617.0 (X64) Developer Edition (64-bit) on Windows NT 6.1 <X64> (Build 7600: )
This error appears to happen when .mof files (Managed Object Format (MOF)) don’t get installed and registered correctly during set-up. To resolve this issue, I executed
the following mofcomp command in command prompt to re-register the *.mof files:
mofcomp.exe "C:\Program Files (x86)\Microsoft SQL Server\100\Shared\sqlmgmproviderxpsp2up.mof"
Regards,
Basit A. Farooq (MSC Computing, MCITP SQL Server 2005 & 2008, MCDBA SQL Server 2000)
http://basitaalishan.com
cau u pls tell me how to type this command on command prompt. I also have the same error in sql server 2008. I allready have sql server 2008 sp2 installed. When I was trying to type this command as it it by copying this full command to command prompt it
shows that command not found as follows
C:\>mofcomp.exe "C:\Program Files (x86)\Microsoft SQL Server\100\Shared\sqlmgmpr
oviderxpsp2up.mof"
Microsoft (R) MOF Compiler Version 6.1.7600.16385
Copyright (c) Microsoft Corp. 1997-2006. All rights reserved.
File 'C:\Program Files (x86)\Microsoft SQL Server\100\Shared\sqlmgmproviderxpsp2
up.mof' not found!
please tell me step by step
thanks
nravhad
Similar Messages
-
SQL Server Agent gives- Remote procedure call failed (0x800706be)
I can't access SQL Server 2008 R2 remotely on Windows 2008
1. TCP/IP Enabled for SQL Server Network Configuration Protocols, SQL Native Client 10.0 configuration clients, and SQL Native Client 10.0 configuration clients(32 bit)
2. Firewall disabled to make sure its not interferring with things.
I noticed the SQL Server Agent is Stopped. Not sure if this is the issue. When I try and turn this from disabled to Automatic or Manual, I get this error:
Remote procedure call failed (0x800706be)
It shouldn't be this difficult.
Thank you for your help in advance!Any luck?
The following thread is on the same topic with solutions:
http://social.technet.microsoft.com/Forums/en-US/winservermanager/thread/75933d1c-f142-459e-b7dc-d43ad4f8f93f/
Kalman Toth SQL SERVER 2012 & BI TRAINING
New Book:
Beginner Database Design & SQL Programming Using Microsoft SQL Server 2012 -
sql server services give error the remote procedure call failed [0x800706be] in sql server 2008.
To resolve this issue, I executed the following mofcomp command in command prompt to re-register the *.mof files:
mofcomp.exe "C:\Program Files (x86)\Microsoft SQL Server\100\Shared\sqlmgmproviderxpsp2up.mof".
but it does not work.
Plz give the exact soln to solve this error.sql server services give error the remote procedure call failed [0x800706be] in sql server 2008.
To resolve this issue, I executed the following mofcomp command in command prompt to re-register the *.mof files:
mofcomp.exe "C:\Program Files (x86)\Microsoft SQL Server\100\Shared\sqlmgmproviderxpsp2up.mof".
but it does not work.
Plz give the exact soln to solve this error.
So when you tried starting SQL server service it gave the error right ? or when you click on SQL server services in SQL server configuration manager(SSCM) you get this error. Can you be more clear. As far as I read your question it has something
to do with permission. Close SSCM window and this time right click on SQL server configuration manager and select run as administrator and check if you can see SQL server services
Please mark this reply as answer if it solved your issue or vote as helpful if it helped so that other forum members can benefit from it
My Technet Articles -
The Remote Procedure call failed error in Microsoft Direct Access configuration
Hi,
I have setup the Microsoft Base lab using Microsoft TLG, I have generated the IPHTTPS and NLS server certificate using the Microsoft PKI. After that I have installed the Microsoft Direct Access role but at the time of configuring the Remote Access Server
it fails with the remote procedure call failed error.
Could anybody help me to resolve this issue. I have searched a lot but no any solution found. It will be very helpful, if some one can point me where I did mistake.
Thanks,
Arifsql server services give error the remote procedure call failed [0x800706be] in sql server 2008.
To resolve this issue, I executed the following mofcomp command in command prompt to re-register the *.mof files:
mofcomp.exe "C:\Program Files (x86)\Microsoft SQL Server\100\Shared\sqlmgmproviderxpsp2up.mof".
but it does not work.
Plz give the exact soln to solve this error.
So when you tried starting SQL server service it gave the error right ? or when you click on SQL server services in SQL server configuration manager(SSCM) you get this error. Can you be more clear. As far as I read your question it has something
to do with permission. Close SSCM window and this time right click on SQL server configuration manager and select run as administrator and check if you can see SQL server services
Please mark this reply as answer if it solved your issue or vote as helpful if it helped so that other forum members can benefit from it
My Technet Articles -
Remote procedure called failed
I have sql server 2008 installed with Business intelligence development studio. When I goes to configuration manager to check whether sql server is running or not it showing a message like
remote procedure called failed. When I googled it then it ask me to install sql server 2008 r2 sp1. After that I also installed sql server 2008 r2 sp1 then also it showing the same error.
Plz help me on this.
nravhadHello,
I would like you to see below two articles
http://thesqldude.com/2012/12/05/sql-server-2012-configuration-manager-wmi-error-remote-procedure-call-failed-0x800706be/
http://social.technet.microsoft.com/Forums/sqlserver/en-US/d9359da1-7793-4b6c-b4e0-ffd332a1c613/remote-procedure-call-failed-in-sql-server-configuration-manager
Also 2008 R2 has now SP2.You could try to update to SP2 also and see if it helps
Please mark this reply as the answer or vote as helpful, as appropriate, to make it useful for other readers -
Sql Server Configuration Manager fails to start
Hi,
My Os is Windows 7 Enterprise.
I have Sql Server 2008 Developer Edt. with sp1
and Sql Server 2005 express (which comes with Visual Studio)
When I try to open Configuration Manager it fails:
Cannot connect to WMI provider. You do not have permission or the server is unreachable. Note that you can only manage SQL Server 2005 and later server with SQL Server Configuration Manager.
Invalid class [0x80041010]
I've tried everything I could find on the net. But none of them worked for me.
Later, I realised that the file called "sqlwep-uni.mof" under "c:\Program Files\Microsoft SQL Server\MSSQL10.INSTANCENAME\MSSQL\Binn" has failed with mofcomp command.
Microsoft (R) MOF Compiler Version 6.1.7600.16385
Copyright (c) Microsoft Corp. 1997-2006. All rights reserved.
Parsing MOF file: sqlwep-uni.mof
MOF file has been successfully parsed
Storing data in the repository...
An error occurred while processing item 4 defined on lines 88 - 88 in file sqlwep-uni.mof:
Error Number: 0x8004100e, Facility: WMI
Description: Invalid namespace
Compiler returned error 0x8004100e
Any suggestions?I think this can be fixed by parsing / registering the sqlmgmproviderxpsp2up mof file.
Have a look here - http://blogs.msdn.com/echarran/archive/2006/01/03/509061.aspx
Thanks, Leks
That was the first thing I tried :)
I've also tried this: http://social.msdn.microsoft.com/Forums/en/sqltools/thread/468b8484-2729-4a06-bfc3-efe54507dcb6
and this: http://msmvps.com/blogs/martinpoon/archive/2009/11/27/sql-server-configuration-manager-cannot-connect-to-wmi-provider-invalid-class-0x80041010.aspx
and that: http://www.nucleustechnologies.com/Repair-WMI-Services.php
and some other stuff I could find.
At least I've tried to repair Sql 2008 installation. But it also did not work.
Lastly I've uninstalled all the instances and components related with sql. And I renamed the folders (C:\Program Files\Microsoft SQL Server and the hidden folder C:\ProgramData\Microsoft\Microsoft SQL Server) and made a clean install. Voila, it worked!
But the "Sql Server Configuration Manager"s icon has gone somewhere :) Anyway it works fine now.
I had to do that because I have a project to finish.
Poor Microsoft! -
I am running Hyper-V in Windows 8.1 on a late 2011 27 inch iMac. Whenever I try to create a virtual machine I get the error below and Windows warns that it will restart in 1 minute. I tried a clean install of Windows, but my PC still crashes ever
time I try to create a VM. I was able to successfully use Hyper-V in prior versions of Windows on this same PC. Any clue as to what is going on? A driver? Windows 8.1? Mac Hardware related?
I see the following two entries in event viewer but have no other clue as to what is happening:
Log Name: Microsoft-Windows-Hyper-V-VMMS-Admin
Source: Microsoft-Windows-Hyper-V-VMMS
Date: 1/10/2014 10:48:46 AM
Event ID: 16000
Task Category: None
Level: Error
Keywords:
User: SYSTEM
Computer: Charles-PC.CHARLESPOOL.local
Description:
The Hyper-V Virtual Machine Management service encountered an unexpected error: The remote procedure call failed. (0x800706BE).
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft-Windows-Hyper-V-VMMS" Guid="{6066F867-7CA1-4418-85FD-36E3F9C0600C}" />
<EventID>16000</EventID>
<Version>0</Version>
<Level>2</Level>
<Task>0</Task>
<Opcode>0</Opcode>
<Keywords>0x8000000000000000</Keywords>
<TimeCreated SystemTime="2014-01-10T15:48:46.770451300Z" />
<EventRecordID>58</EventRecordID>
<Correlation />
<Execution ProcessID="2488" ThreadID="8704" />
<Channel>Microsoft-Windows-Hyper-V-VMMS-Admin</Channel>
<Computer>Charles-PC.CHARLESPOOL.local</Computer>
<Security UserID="S-1-5-18" />
</System>
<UserData>
<VmlEventLog xmlns:auto-ns2="http://schemas.microsoft.com/win/2004/08/events" xmlns="http://www.microsoft.com/Windows/Virtualization/Events">
<ErrorMessage>%%2147944126</ErrorMessage>
<ErrorCode>0x800706BE</ErrorCode>
</VmlEventLog>
</UserData>
</Event>
Log Name: Microsoft-Windows-Hyper-V-VMMS-Admin
Source: Microsoft-Windows-Hyper-V-VMMS
Date: 1/10/2014 10:48:46 AM
Event ID: 16010
Task Category: None
Level: Error
Keywords:
User: SYSTEM
Computer: Charles-PC.CHARLESPOOL.local
Description:
The operation failed.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft-Windows-Hyper-V-VMMS" Guid="{6066f867-7ca1-4418-85fd-36e3f9c0600c}" />
<EventID>16010</EventID>
<Version>0</Version>
<Level>2</Level>
<Task>0</Task>
<Opcode>0</Opcode>
<Keywords>0x8000000000000000</Keywords>
<TimeCreated SystemTime="2014-01-10T15:48:46.773497100Z" />
<EventRecordID>59</EventRecordID>
<Correlation />
<Execution ProcessID="2488" ThreadID="8704" />
<Channel>Microsoft-Windows-Hyper-V-VMMS-Admin</Channel>
<Computer>Charles-PC.CHARLESPOOL.local</Computer>
<Security UserID="S-1-5-18" />
</System>
<ProcessingErrorData>
<ErrorCode>15005</ErrorCode>
<DataItemName>Parameter0</DataItemName>
<EventPayload>
</EventPayload>
</ProcessingErrorData>
</Event>Hi CharlesPool,
I am assuming that the win8.1 is in-place updated from win8 .
Maybe you need to check the state of hypervisorlaunchtype .
If it is off , please run command " bcdedit /set hypervisorlaunchtype auto "
Best Regards
Elton Ji
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place. -
Exchange 2010 SP3 Failing to Install "The remote procedure call failed"
I am getting an error while trying to upgrade the first Mailbox server in the organization to SP3. The CAS and HUB servers already upgraded without any issues. Any help is greatly appreciated.
Here is the exchange setup logs output:
[11/15/2014 09:10:52.0512] [2] Creating Server Object with DN = /dc=xxx/dc=xxx/cn=Configuration/cn=Services/cn=Microsoft Exchange/cn=xxx/cn=Administrative Groups/cn=Exchange Administrative Group (xxxx)/cn=Servers/cn=xxxxxx
[11/15/2014 09:10:52.0512] [2] Status code check (f:\14.03.0123\sources\dev\admin\src\libs\ds\x_dob.cxx:3370)
Error code 0X8000500D (20493): This property can't be found in the cache.
[11/15/2014 09:10:52.0528] [2] Leaving ScCreateServerObject
[11/15/2014 09:10:52.0528] [2] Entering ScSetServerNetworkAddresses
[11/15/2014 09:10:52.0528] [2] Entering ScGetServerDNSNameFromDS
[11/15/2014 09:11:11.0482] [2] ScUserDNFromLoginName (f:\14.03.0123\sources\dev\admin\src\libs\exsetup\exmisc.cxx:1441)
Error code 0XC00706BE (1726): The remote procedure call failed.
[11/15/2014 09:11:11.0482] [2] ScGetServerDNSNameFromDS (f:\14.03.0123\sources\dev\admin\src\libs\exsetup\dsmisc.cxx:3481)
Error code 0XC00706BE (1726): The remote procedure call failed.
[11/15/2014 09:11:11.0482] [2] Leaving ScGetServerDNSNameFromDS
[11/15/2014 09:11:11.0482] [2] ScSetServerNetworkAddresses (f:\14.03.0123\sources\dev\admin\src\udog\excommon\ptudutil.cxx:1028)
Error code 0XC00706BE (1726): The remote procedure call failed.
[11/15/2014 09:11:11.0482] [2] Leaving ScSetServerNetworkAddresses
[11/15/2014 09:11:11.0482] [2] CAtomServer::ScAddOrRefreshDSObjects (f:\14.03.0123\sources\dev\admin\src\udog\exsetdata\components\server\a_server.cxx:288)
Error code 0XC00706BE (1726): The remote procedure call failed.
[11/15/2014 09:11:11.0482] [2] CAtomServer::ScAddDSObjects (f:\14.03.0123\sources\dev\admin\src\udog\exsetdata\components\server\a_server.cxx:354)
Error code 0XC00706BE (1726): The remote procedure call failed.
[11/15/2014 09:11:11.0482] [2] CBaseAtom::ScReinstall (f:\14.03.0123\sources\dev\admin\src\udog\setupbase\basecomp\baseatom.cxx:815)
Error code 0XC00706BE (1726): The remote procedure call failed.
[11/15/2014 09:11:11.0482] [2] Leaving CBaseAtom(Microsoft Exchange Server-Level Objects)::ScReinstall
[11/15/2014 09:11:11.0482] [2] Service = '' CBaseServiceAtom::ScReinstall (f:\14.03.0123\sources\dev\admin\src\udog\setupbase\basecomp\basesvcatom.cxx:242)
Error code 0XC00706BE (1726): The remote procedure call failed.
[11/15/2014 09:11:11.0482] [2] Leaving CBaseServiceAtom(Microsoft Exchange Server-Level Objects)::ScReinstall
[11/15/2014 09:11:11.0482] [2] mode = 'Reinstall' (61955) CBaseAtom::ScSetup (f:\14.03.0123\sources\dev\admin\src\udog\setupbase\basecomp\baseatom.cxx:537)
Error code 0XC00706BE (1726): The remote procedure call failed.
[11/15/2014 09:11:11.0482] [2] ScSetupAtom (f:\14.03.0123\sources\dev\admin\src\udog\exsetdata\exsetds.cxx:882)
Error code 0XC00706BE (1726): The remote procedure call failed.
[11/15/2014 09:11:11.0482] [2] Leaving ScSetupAtom
[11/15/2014 09:11:11.0482] [2] [ERROR] An error occurred with error code '3221685950' and message 'The remote procedure call failed.'.
[11/15/2014 09:11:11.0482] [1] The following 1 error(s) occurred during task execution:
[11/15/2014 09:11:11.0482] [1] 0. ErrorRecord: An error occurred with error code '3221685950' and message 'The remote procedure call failed.'.
[11/15/2014 09:11:11.0482] [1] 0. ErrorRecord: Microsoft.Exchange.Management.Deployment.ExsetdataException: An error occurred with error code '3221685950' and message 'The remote procedure call failed.'.
[11/15/2014 09:11:11.0482] [1] [ERROR] The following error was generated when "$error.Clear();
buildToBuildUpgrade-ExsetdataAtom -AtomName Server -DomainController $RoleDomainController
" was run: "An error occurred with error code '3221685950' and message 'The remote procedure call failed.'.".
[11/15/2014 09:11:11.0482] [1] [ERROR] An error occurred with error code '3221685950' and message 'The remote procedure call failed.'.
[11/15/2014 09:11:11.0482] [1] [ERROR-REFERENCE] Id=AllADRolesCommon__ExsetdataServer Component=EXCHANGE14:\Current\Release\Shared\Datacenter\Setup
[11/15/2014 09:11:11.0482] [1] Setup is stopping now because of one or more critical errors.
[11/15/2014 09:11:11.0482] [1] Finished executing component tasks.
[11/15/2014 09:11:11.0529] [1] Ending processing Install-MailboxRole
[11/15/2014 09:14:12.0977] [0] End of Setup
[11/15/2014 09:14:12.0977] [0] **********************************************
Additionally here is the 2 errors that are showing up in the event viewer for MSExachange Management:
Exchange Management Console-Local
2652
45
00:00:18.9698426
View Entire Forest: 'True', Configuration Domain Controller: 'domaincontroller.xxx.xxx', Preferred Global Catalog: 'domaincontroller.xxx.xxx', Preferred Domain Controllers: '{ domaincontroller.xxx.xxx }'
Microsoft.Exchange.Management.Deployment.ExsetdataException: An error occurred with error code '3221685950' and message 'The remote procedure call failed.'.
0
Exchange Management Console-Local
2652
9
00:00:37.7834262
View Entire Forest: 'True', Configuration Domain Controller: 'domaincontroller.xxx.xxx', Preferred Global Catalog: 'domaincontroller.xxx.xxx', Preferred Domain Controllers: '{ domaincontroller.xxx.xxx }'
Microsoft.Exchange.Management.Deployment.ScriptExecutionException: The following error was generated when "$error.Clear(); buildToBuildUpgrade-ExsetdataAtom -AtomName Server -DomainController $RoleDomainController
" was run: "An error occurred with error code '3221685950' and message 'The remote procedure call failed.'.". ---> Microsoft.Exchange.Management.Deployment.ExsetdataException: An error occurred with error code '3221685950' and message 'The
remote procedure call failed.'. --- End of inner exception stack trace ---
0
Microsoft.Exchange.Management.Deployment.ExsetdataException: An error occurred with error code '3221685950' and message 'The remote procedure call failed.'.Hi,
Please try to remove the Water mark and Action keys under
HKLM\SOFTWARE\Microsoft\Exchangeserver\V14\MailboxRole
After that, reboot the server and rerun the set up.
This issue due to Exchange failed set up was trying to resume the previously failed setup rather than starting completely over.
Best Regards. -
Can't find SSL certificate in SQL server configuration manager?
Hi
It's been 2 days and I need a help. I have visited a number of sites and I still can't make it work
Two severs I have: Windows 2012 Standard with SQL 2008 R2 and SQL 2012
I am trying to set it up on SQL 2008 R2 right now.
I have a certificate from a CA and did the followings.
1. Open MMC
2. Add Certificates Snap-in as a computer account (In fact, I tried all the three accounts)
3. Right click-on Personal folder and All taks and Import
4. Installed the certificate with Certificate import Wizard
5. The certificate shows up under Personal/Certificates and Trusted Root Certification Authorities/Certificates
I did this with a local administrator account as well as MSSQL account(SQL Server service account I created). Even though the server is part of domain, SQL server is set up with local accounts.
This is a simply summary. I tried everything in the article such as 'Create Custom Request'.
I am not sure what I am missing. Why can't I see the certificate in SQL Server configuration manager?
I even made MSSQL (service account) as administrator. Not working.
as I am not using the domain service account, I believe below is not relevant.
Missing detail on "Install a certificate in the Windows certificate store..."
When following recommended security procedures and running SQL server under a domain service account, the service will fail to start after assigning a certificate to the protocols. This is because the service account does not have permissions to read
the private key. Fix this in the Certificates MMC snap-in (preferably right after installing the certificate.) Select the certificate you just imported, then in the Action menu select "Manage private keys." Grant the domain service
account read access to the private key of the server certificate.
Below is the few of reference I looked at..
https://support.microsoft.com/en-us/kb/316898/
https://msdn.microsoft.com/en-us/library/ms191192(d=printer).aspx
https://technet.microsoft.com/en-us/library/ms189067(v=sql.105).aspx
http://www.mssqltips.com/sqlservertip/3299/how-to-configure-ssl-encryption-in-sql-
http://blogs.msdn.com/b/sqlserverfaq/archive/2010/05/28/inf-permissions-required-for-sql-server-service-account-to-use-ssl-certificate.aspxHi Dinesh
Thanks for the reply.
I did looked into the both sites as well. but it did not work.
Below is the step to install SQLs server certificate. and I was stuck with Step 9. when click 'next' in the wizard, I am not getting into a place to select 'computer' as certificate type.
Do you know what is wrong please?
Open the Microsoft Management Console (MMC): click Start, then click Run and in the Run dialog box type: MMC
On the File menu, click Add/Remove Snap-in...
Select Certificates, click Add.
You are prompted to open the snap-in for your user account, the service account, or the computer account. Select the Computer Account.
Select Local computer, and then click Finish.
Click OK in the Add/Remove Snap-in dialog box.
Click to select the Personal folder in the left-hand pane.
Right-click in the right-hand pane, point to All Tasks, and then click Request New Certificate...
Click Next in the Certificate Request Wizard dialog box. Select certificate type 'Computer'.
You can enter a friendly name in text box if you want or leave it blank, then complete the wizard.
Now you should see the certificate in the folder with the fully qualified computer domain name -
Remote procedure call failed and did not execute response after changing contents
Hey Hey!
I have reviewed the other posts related to this issue but have not found a solution.
I have done myself quite a mischief and hope someone here can help me out!
I'm running an old ACER laptop with Windows 7. This PC belonged to an old colleague and therefore all of the folders and user names were still under his name, so I decided to try to change them all to my name. The main issue was the USER folder which had
the locked symbol next to it but it wasn't locked at all. I googled how to delete this folder and one bright spark suggested I create a new folder with my name, copy all of the folders from the other 'locked' user's folder into my folder, and then delete the
old user's folder.
That was fine. All seemed well. When I tried to delete the old folder the computer sat around thinking saying it was 'moving' but not doing anything. So, I cancelled the operation in the Task Manager. When I attempted to open any folder from the start menu
or desktop or task bar I was presented with a bunch of numbers and letters and the message "REMOTE PROCEDURE CALL FAILED AND DID NOT EXECUTE."
I quickly googled the message realising I'd made a major error and the first response was to type in services.msc or something to that effect, so I typed that into the Start Menu search bar and hit enter and nothing came up. So, I tried again, but now I
couldn't type anything into the search bar, I could not even select any programs from the Start Menu.
So, I can't access the Start Menu, search bar, or any of the folders unless I open uTorrent, select open containing folder, and from there I can access what I need.
I'm too afraid to reboot the PC. I can't locate my copy of Windows 7 anywhere. I'm freaking out!!
Before I pour my lowly student wage into getting a professional to fix it, could someone please offer some suggestions??
Greatly appreciated in advance.
Paris, Texas.Hi,
Based on your description, for this question is more related to NetQueryDisplayInformation() API, in order to get better help, we may ask for suggestions in the following MSDN forum.
MSDN Forum
https://social.msdn.microsoft.com/Forums/en-US/home
Besides, we can try to use a script to get all domain users. Regarding this point, the following script can be referred to as reference.
How to list all active directory users in a particular domain using PowerShell
https://gallery.technet.microsoft.com/office/How-to-list-all-active-0d9be7ce
In addition, for scripts, we can also ask for help in the following forum.
The Official Scripting Guys Forum
https://social.technet.microsoft.com/Forums/scriptcenter/en-US/home?forum=ITCG
Best regards
Frank Shen -
I'm replicating between two servers in two sites (Server A - Server 2012 R2 STD, Server B - Server 2008 R2) over a VPN (Sonicwall Firewall). Though the initial replication seems to be
happening it is very slow (the folder in question is less than 3GB). I'm seeing these in the event viewer every few minutes:
The DFS Replication service is stopping communication with partner PPIFTC for replication group FTC due to an error. The service will retry the connection periodically.
Additional Information:
Error: 1726 (The remote procedure call failed.)
and then....
The DFS Replication service successfully established an inbound connection with partner PPIFTC for replication group FTC.
Here are all my troubleshooting steps (keep in mind that our VPN is going through a SonicWall <--I increased the TCP timeout to 24 hours):
-Increased TCP Timeout to 24 hours
-Added the following values on both sending and receiving members and rebooted server
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Tcpip\Parameters
Value =DisableTaskOffload
Type = DWORD
Data = 1
Value =EnableTCPChimney
Type = DWORD
Data = 0
Value =EnableTCPA
Type = DWORD
Data = 0
Value =EnableRSS
Type = DWORD
Data = 0
---------------------------------more troubleshooting--------------------------
-Disabled AntiVirus on both members
-Made sure DFSR TCP ports 135 & 5722 are open
-Installed all hotfixes for 2008 R2 (http://support.microsoft.com/kb/968429) and rebooted
-Ran NETSTAT –ANOBP TCP and the DFS executable results are listed below:
Sending Member:
[DFSRs.exe]
TCP 10.x.x.x:53 0.0.0.0:0
LISTENING 1692
[DFSRs.exe]
TCP 10.x.x.x:54669
10.x.x.x:5722 TIME_WAIT 0
TCP 10.x.x.x:54673
10.x.x.x:5722 ESTABLISHED 1656
[DFSRs.exe]
TCP 10.x.x.x:64773
10.x.x.x:389 ESTABLISHED 1692
[DFSRs.exe]
TCP 10.x.x.x:64787
10.x.x.x:389 ESTABLISHED 1656
[DFSRs.exe]
TCP 10.x.x.x:64795
10.x.x.x:389 ESTABLISHED 2104
Receiving Member:
[DFSRs.exe]
TCP 10.x.x.x:56683
10.x.x.x:389 ESTABLISHED 7472
[DFSRs.exe]
TCP 10.x.x.x:57625
10.x.x.x:54886 ESTABLISHED 2808
[DFSRs.exe]
TCP 10.x.x.x:61759
10.x.x.x:57625 TIME_WAIT 0
TCP 10.x.x.x:61760
10.x.x.x:57625 TIME_WAIT 0
TCP 10.x.x.x:61763
10.x.x.x:57625 TIME_WAIT 0
TCP 10.x.x.x:61764
10.x.x.x:57625 TIME_WAIT 0
TCP 10.x.x.x:61770
10.x.x.x:57625 TIME_WAIT 0
TCP 10.x.x.x:61771
10.x.x.x:57625 TIME_WAIT 0
TCP 10.x.x.x:61774
10.x.x.x:57625 TIME_WAIT 0
TCP 10.x.x.x:61775
10.x.x.x:57625 TIME_WAIT 0
TCP 10.x.x.x:61776
10.x.x.x:57625 TIME_WAIT 0
TCP 10.x.x.x:61777
10.x.x.x:57625 TIME_WAIT 0
TCP 10.x.x.x:61778
10.x.x.x:57625 TIME_WAIT 0
TCP 10.x.x.x:61779
10.x.x.x:57625 TIME_WAIT 0
TCP 10.x.x.x:61784
10.x.x.x:52757 ESTABLISHED 7472
[DFSRs.exe]
TCP 10.x.x.x:63661
10.x.x.x:63781 ESTABLISHED 4880
------------------------------more troubleshooting--------------------------
-Increased Staging to 32GB
-Opened the ADSIedit.msc console to verify the "Authenticated Users" is set with the default READ permission on the following object:
a. The computer object of the DFS server
b. The DFSR-LocalSettings object under the DFS server computer object
-Ran
ping <var>10.x.x.x</var> -f -l 1472 and got replies back from both servers
-AD replication is successful on all partners
-Nslookup is working so DNS is working
-Updated NIC drivers on both servers
- I ran the following to set the Primary Member:
dfsradmin Membership Set /RGName:<replication group name> /RFName:<replicated folder name> /MemName:<primary member> /IsPrimary:True
Then Dfsrdiag Pollad /Member:<member name>
I'm seeing these errors in the dfsr logs:
20141014 19:28:17.746 9116 SRTR 957 [WARN] SERVER_EstablishSession Failed to establish a replicated folder session. connId:{45C8C309-4EDD-459A-A0BB-4C5FACD97D44} csId:{7AC7917F-F96F-411B-A4D8-6BB303B3C813}
Error:
+ [Error:9051(0x235b) UpstreamTransport::EstablishSession upstreamtransport.cpp:808 9116 C The content set is not ready]
+ [Error:9051(0x235b) OutConnection::EstablishSession outconnection.cpp:532 9116 C The content set is not ready]
+ [Error:9051(0x235b) OutConnection::EstablishSession outconnection.cpp:471 9116 C The content set is not ready]
---------------------------------------more troubleshooting-----------------------------
I've done a lot of research on the Internet and most of it is pointing to the same stuff I've tried. Does anyone have any other suggestions? Maybe I need to look somewhere
else on the server side or firewall side?
I tried replicating from a 2012 R2 server to another 2012 server and am getting the same events in the event log so maybe it's not a server issue.
Some other things I'm wondering:
-Could it be the speed of the NICs? Server A is a 2012 Server that has Hyper-V installed. NIC teaming was initially setup and since Hyper-V is installed the NIC is a "vEthernet
(Microsoft Network Adapter Multiplexor Driver Virtual Switch) running at a speed of 10.0Gbps whereas Server B is running a single NIC at 1.0Gbps
-Could occasional ping timeout's cause the issue? From time to time I get a timeout but it's not as often as the events I'm seeing. I'm getting 53ms pings. The folder
is only 3 GB so it shouldn't take that long to replicate but it's been days. The schedule I have set for replication is mostly all day except for our backup times which start at 11pm-5am. Throughout the rest of the time I have it set anywhere from
4Mbps to 64 Kbps. Server A is on a 5mb circuit and Server B is on a 10mb circuit.I'm seeing the same errors, all servers are running 2008 R2 x64. Across multiple sites, VPN is steady and reliably.
185 events from 12:28:21 to 12:49:25
Events are for all five servers (one per office, five total offices, no two in the same city, across three states).
Events are not limited to one replication group. I have quite a few replication groups, so I don't know for sure but I'm running under the reasonable assumption that none are spared.
Reminder from original post (and also, yes, same for me), the error is: Error: 1726 (The remote procedure call failed.)
Some way to figure out what code triggers an Event ID 5014, and what code therein specifies an Error 1726, would extremely helpful. Trying random command line/registry changes on live servers is exceptionally unappealing.
Side note, 1726 is referenced here:
https://support.microsoft.com/kb/976442?wa=wsignin1.0
But it says, "This RPC connection problem may be caused by an unstable WAN connection." I don't believe this is the case for my system.
It also says...
For most RPC connection problems, the DFS Replication service will try to obtain the files again without logging a warning or an error in the DFS Replication log. You can capture the network trace to determine whether the cause of the problem is at the network
layer. To examine the TCP ports that the DFS Replication service is using on replication partners, run the following command in a
Command Prompt window:
NETSTAT –ANOBP TCP
This returns all open TCP connections. The connections in question are "DFSRs.exe", which the command won't let you filter for.
Instead, I used the NETSTAT command as advertised, dumping output to info.txt:
NETSTAT -ANOBP TCP >> X:\info.txt
Then I opened Excel and manually opened the .TXT for the open wizard. I chose fixed-width fields based on the first row for each result, and then added a column:
=IF(A3="Can not", "Can not obtain ownership information", IF(LEFT(A3,1) = "[", A3&B3&C3, ""))
Dragging this down through the entire file let me see that row (Row F) as the file name. Some anomalies were present but none impacted DFSrs.exe results.
Finally, you can sort/filter (I sorted because I like being able to see everything, should I choose to) to get just the results you need, with the partial rows removed from the result set, or bumped to the end.
My server had 125 connections open.
That is a staggering number of connections to review, and I feel like I'm looking for a needle in a haystack.
I'll see if I can find anything useful out, but a better solution would be most wonderful. -
SQL Server Configuration Manager
Hello,
I have a SQL 2008 SP3 install on Server 2012. It is clustered active/active. When opening SQL Server Configuration Manager > SQL Server Services, I receive the following message: The server threw an exception [0x80010105]
I have tried restarting WMI and this didn't resolve the issue as many posts and blogs have suggested.
I found this article: http://support.microsoft.com/kb/2849344 but it only applies to SQL Server 2008R2 not 2008 that we have installed.
It states to grab a msclus.dll out of %windir%\syswow64 on a Windows 2008R2 box. A 32bit msclus.dll file or a 64bit file does not exist on a 2008R2 box in this directory. There is one in %windir%\system32 directory but the article clearly states
it exists in the Syswow64 folder.
Any help would be appreciated.
Thanks,
zWindowsHi zWindows,
According to your description, the msclus.dll does exist in %windir%\system32 directory in your Windows Server 2008R2. I check this file in my cluster environment, it does exist in %windir%\winsxs directory. Personally, it belongs to system files, and maybe
saved in different system path due to the system version and bit. The different path will not affect to copy this file to the related directory. Then, register this .dll file on each node of the cluster.
About this exception [0x80010105], we need to verify if you change service account to a new domain user by SQL Server Configuration Manager in a clustered SQL Server instance. If yes, you need to ensure that Everyone is added to "Remote Launch" and "Remote
Activation" DCOM permissions, and new domain user account have read rights in WMI.
For more information about exception 0x80010105, you can review the following article.
http://blogs.msdn.com/b/sql_server_reflections/archive/2012/08/28/unable-to-change-the-service-account-of-a-clustered-sql-server-instance-the-server-threw-exception-0x80010105.aspx
Regards,
Sofiya Li
Sofiya Li
TechNet Community Support -
SQL Server configuration manager is empty
Hi. I am getting a timeout when I try to start SQL Agent on my local machine. I went to the Configuration Manager to investigate but the box is empty except for SQL Server Browser. Shouldn't all of my services be listed here? (Integration
Services, SQL Agent, etc)? I attached a screenshot for a reference.
While I have this question opened, can someone help me with why I can't start SQL Agent? I am getting a "timeout" error. I've been able to start SQL Agent in the past. The only thing I did was install SP2 for SQL Server 2012.
Any ideas?
Thanks!
CraigHi CBLEV,
Please follow the steps in this
blog to troubleshoot the issue that SQL Server Configuration Manager is missing services.
When SQL Server Configuration Manager works properly, please start SQL Server Agent Service from it. If you still fail to start SQL Server Agent Service, for further analysis, please help to post the full error message from SQL Server ErrorLog and Windows Event
log.
Thanks,
Lydia Zhang
Lydia Zhang
TechNet Community Support -
How to automate Sql Server Configuration Manager settings?
For example, I have just installed Sql Express 2012, and need to configure it for use over the local network. Usually I just manually open Sql Server Configuration Manager -- Sql Server Network Configuration -- <myinstance>, and enable TCP/IP on 1433.However,
I am not going to be available to do this on every customer's computer. I need to do these steps using a script or something. Is there a way to do this?Have a look at this stackexchange thread:
http://stackoverflow.com/questions/9138172/enable-tcp-ip-remote-connections-to-sql-server-express-already-installed-databas
There are two good options outlined there
1. install it with the /TCPENABLED=1 switch (in the original post)
2. Execute a wmi script post-install (in the answer)
Note: if you decide to use WMI the root path will be \root\Microsoft\SqlServer\ComputerManagement11 for 2012
I will have to support install time, and post install. Does TCPENABLED=1 also setup the 1433 port value in TCP/IP Properties - IP Addresses tab? -
cannot open pictures in Window 8.1...getting message 'the remote procedure call failed". What is the solution?
I recently bought a new HP computuer and uploaded Window 8.1. I then transfered photo files from old computer to new computer using a portable storage drive.
When trying to view the photos, a message pops up showing a file path...and the message 'the remote procedure call failed'. Photos are in jpeg format.
Please let me know what I can do to view photos?What program you use to view these photos? Choose another app to view these photos
for a test.
This issue only occurred when you view photo? What is the result if we connect the
portable storage drive to other computer (if possible)?
Run sfc/scannow to check and fix if there are some missing or corrupted system files.
Check the event viewer to see the detailed information of this issue.
Regards
Yolanda
TechNet Community Support
Maybe you are looking for
-
REFRESH OF TABLE CONTROL.
HI GURUS, I AM USING TWO TABLE CONTROLS AND WANT TO SHOW THE SELECTED RECORDS IN THE SECOND TABLE CONTROL, ACTUALLY FOR THE FIRST TIME IF I SELECT RECORDS IT IS SHOWING CORRECTLY IN THE SECOND TABLE CONTROL BUT WHEN I AM BACK TO FIRST TABLE CONTROL A
-
I am opening a PDF in Photoshop CS5 for a quick cut-and-paste job into another file, and whenever I open it, the entire image turns white as if there is an overprint on. I've never had this problem before I upgraded to CS5. Since PS opens PDFs as f
-
Timeline window - Feature Request
Attention FCPx Developers! -- Please create a View option to hide the Events window entirely, along with the option to Maximise the Timeline editing Window. Most of my timeline editing work does not require viewing the Events window. It is a waste
-
Mouse scrolling zooms stage to the left
Guys, when in fullscreen mode in my browser I scroll mouse down, the content of what is the stage in animate is zoomed out, and that is correct behavior but what is incorrect about it that it zooms out to the left corner of the browser and I'd like i
-
Where do I go to become an app developer
Looking to create an app for the I-phone or I-pad. Where do I go to look into that?