SQL Server Expres 2008R2 on Windows 7 peer to peer network using MS Access to connect - ODBC Login Timeout
Hello,
I have had a Microsoft Access database that was running on Windows XP against a SQL Server 2000 database. We are running on a peer to peer network. This all worked fine. Recently I upgraded all the systems to Windows 7 and the Access database
to Office 2013 and setup SQL Server Express 2008R2. I am running into strange problems trying to connect the access database to SQL Server Express.
SQL Server Express was setup with mixed authentication mode.
What is strange to me is that if I run the Access database on the same server as SQL Server Express 2008R2, everything works fine. However, if I run the Access database from a separate system (Windows usernames and passwords are identical on all systems
for all accounts). I get a spinning circle, then after 5 minutes or so I get an error box that says "Connection Failed SQL State S1-T00 - ODBC Login Timeout Expired.
I click OK and then there is a ODBC login box, It has trusted connection box checked. So, I just click ok and everything runs fine.
I have checked with the Access database the ODBC connection string (How do you change this to imbed a username and pwd?) and the connection specifies that trustedconnection = yes.
I have tried setting the odbc connection up to use a SQL Account, I have setup all of the security in SQL so that Windows accounts have access and either works on the system that is hosting the SQL database. But when I try to connect from a separate
machine we have to wait with the timeout and then click okay.
Any Ideas.
Thank you!!!
I have TCP/IP and named pipes.
I will take a look at the kb article.
What puzzles me is that odbc connection is set for trusted connection, the access database is set for trusted connection. But yet it seems that it wants to do a SQL authentication. Then it fails, and then if you simply hit okay to do the Trusted
Connection then it is fine.
I will read about setting the UID and PWD in code. Been a long time since I have done that, but very doable. Then see if the Access DB is setup with the UID and Pwd in the odbc connection string, then switch the odbc connection to be a SQL Server
connect, then maybe it will work.. Crossing my fingers.
I will be back on site next week and will give it a try then.
I will check the ports, but suspect they are fine as it works fine after it has it timed out and you hit okay to connect with a trusted connection.
Thanks for your ideas.
Similar Messages
-
Unable to install sql server express 2014 in windows 8.1 pro
The program terminates with:
"Unable to retrieve data for this operation"
the logs all end with:
Attempting to launch process C:\Program Files\Microsoft SQL Server\120\Setup Bootstrap\SQLServer2014\setup.exe
the bootstrap log references exception:
"Microsoft.SqlServer.Configuration.SetupExtension.RunDiscoveryAction" threw an exception during execution.
(01) 2015-04-02 08:45:15 Slp: Microsoft.SqlServer.Setup.Chainer.Workflow.ActionExecutionException: Failed to retrieve data for this request. ---> Microsoft.SqlServer.Management.Sdk.Sfc.EnumeratorException: Failed to retrieve data for this request. --->
Microsoft.SqlServer.Configuration.Sco.ScoException: Attempted to perform an unauthorized operation. ---> System.UnauthorizedAccessException: Attempted to perform an unauthorized operation.
(01) 2015-04-02 08:45:15 Slp: at Microsoft.SqlServer.Configuration.Sco.InternalRegistryKey.OpenSubKey(String subkey, RegistryAccess requestedAccess)
Can you help?Just in case, here is a log when running as administrator:
Overall summary:
Final result: Failed: see details below
Exit code (Decimal): -2146233088
Exit facility code: 19
Exit error code: 5376
Exit message: Failed to retrieve data for this request.
Start time: 2015-04-03 12:17:20
End time: 2015-04-03 12:17:37
Requested action: Install
Exception help link:
http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=12.0.2000.8&EvtType=0x48BB60BC%400xBB814387&EvtType=0x48BB60BC%400xBB814387
Machine Properties:
Machine name: DGF-PAVILION
Machine processor count: 4
OS version: Windows 8
OS service pack:
OS region: United States
OS language: English (United States)
OS architecture: x64
Process architecture: 64 Bit
OS clustered: No
Package properties:
Description: Microsoft SQL Server 2014
ProductName: SQL Server 2014
Type: RTM
Version: 12
SPLevel: 0
Installation location: C:\0\SQLServer Developer\x64\setup\
Installation edition: Evaluation
Product Update Status:
None discovered.
User Input Settings:
ACTION: Install
ADDCURRENTUSERASSQLADMIN: false
AGTSVCACCOUNT: <empty>
AGTSVCPASSWORD: <empty>
AGTSVCSTARTUPTYPE: Manual
ASBACKUPDIR: Backup
ASCOLLATION: Latin1_General_CI_AS
ASCONFIGDIR: Config
ASDATADIR: Data
ASLOGDIR: Log
ASPROVIDERMSOLAP: 1
ASSERVERMODE: MULTIDIMENSIONAL
ASSVCACCOUNT: <empty>
ASSVCPASSWORD: <empty>
ASSVCSTARTUPTYPE: Automatic
ASSYSADMINACCOUNTS: <empty>
ASTEMPDIR: Temp
BROWSERSVCSTARTUPTYPE: Disabled
CLTCTLRNAME: <empty>
CLTRESULTDIR: <empty>
CLTSTARTUPTYPE: 0
CLTSVCACCOUNT: <empty>
CLTSVCPASSWORD: <empty>
CLTWORKINGDIR: <empty>
COMMFABRICENCRYPTION: 0
COMMFABRICNETWORKLEVEL: 0
COMMFABRICPORT: 0
CONFIGURATIONFILE:
CTLRSTARTUPTYPE: 0
CTLRSVCACCOUNT: <empty>
CTLRSVCPASSWORD: <empty>
CTLRUSERS: <empty>
ENABLERANU: false
ENU: true
ERRORREPORTING: false
FEATURES:
FILESTREAMLEVEL: 0
FILESTREAMSHARENAME: <empty>
FTSVCACCOUNT: <empty>
FTSVCPASSWORD: <empty>
HELP: false
IACCEPTSQLSERVERLICENSETERMS: false
INDICATEPROGRESS: false
INSTALLSHAREDDIR: C:\Program Files\Microsoft SQL Server\
INSTALLSHAREDWOWDIR: C:\Program Files (x86)\Microsoft SQL Server\
INSTALLSQLDATADIR: <empty>
INSTANCEDIR: C:\Program Files\Microsoft SQL Server\
INSTANCEID: <empty>
INSTANCENAME: <empty>
ISSVCACCOUNT: NT AUTHORITY\Network Service
ISSVCPASSWORD: <empty>
ISSVCSTARTUPTYPE: Automatic
MATRIXCMBRICKCOMMPORT: 0
MATRIXCMSERVERNAME: <empty>
MATRIXNAME: <empty>
NPENABLED: 0
PID: *****
QUIET: false
QUIETSIMPLE: false
ROLE:
RSINSTALLMODE: DefaultNativeMode
RSSHPINSTALLMODE: DefaultSharePointMode
RSSVCACCOUNT: <empty>
RSSVCPASSWORD: <empty>
RSSVCSTARTUPTYPE: Automatic
SAPWD: <empty>
SECURITYMODE: <empty>
SQLBACKUPDIR: <empty>
SQLCOLLATION: SQL_Latin1_General_CP1_CI_AS
SQLSVCACCOUNT: <empty>
SQLSVCPASSWORD: <empty>
SQLSVCSTARTUPTYPE: Automatic
SQLSYSADMINACCOUNTS: <empty>
SQLTEMPDBDIR: <empty>
SQLTEMPDBLOGDIR: <empty>
SQLUSERDBDIR: <empty>
SQLUSERDBLOGDIR: <empty>
SQMREPORTING: false
TCPENABLED: 0
UIMODE: Normal
UpdateEnabled: true
UpdateSource: MU
USEMICROSOFTUPDATE: false
X86: false
Configuration file: C:\Program Files\Microsoft SQL Server\120\Setup Bootstrap\Log\20150403_121719\ConfigurationFile.ini
Rules with failures:
Global rules:
Scenario specific rules:
Rules report file: The rule result report file is not available.
Exception summary:
The following is an exception stack listing the exceptions in outermost to innermost order
Inner exceptions are being indented
Exception type: Microsoft.SqlServer.Management.Sdk.Sfc.EnumeratorException
Message:
Failed to retrieve data for this request.
HResult : 0x80131500
Data:
HelpLink.ProdName = Microsoft SQL Server
HelpLink.BaseHelpUrl =
http://go.microsoft.com/fwlink
HelpLink.LinkId = 20476
HelpLink.EvtType =
0x48BB60BC@0xBB814387
DisableWatson = true
Stack:
at Microsoft.SqlServer.Management.Sdk.Sfc.Enumerator.Process(Object connectionInfo, Request request)
at Microsoft.SqlServer.Chainer.Infrastructure.SqlDiscoveryDatastoreInterface.ProcessDTbl(DataTable dt, Int32 level)
at Microsoft.SqlServer.Chainer.Infrastructure.SqlDiscoveryDatastoreInterface.ProcessDTbl(DataTable dt, Int32 level)
at Microsoft.SqlServer.Chainer.Infrastructure.SqlDiscoveryDatastoreInterface.CollectSqlDiscoveryData(String machineName)
at Microsoft.SqlServer.Chainer.Infrastructure.SqlDiscoveryDatastoreInterface.CollectDiscoveryData(String machineName)
at Microsoft.SqlServer.Chainer.Infrastructure.SqlDiscoveryDatastoreInterface.LoadData(IEnumerable`1 machineNames, String discoveryDocRootPath, String clusterDiscoveryDocRootPath)
at Microsoft.SqlServer.Configuration.SetupExtension.RunDiscoveryAction.ExecuteAction(String actionId)
at Microsoft.SqlServer.Chainer.Infrastructure.Action.Execute(String actionId, TextWriter errorStream)
at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.<>c__DisplayClasse.<ExecuteActionWithRetryHelper>b__b()
at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.ExecuteActionHelper(ActionWorker workerDelegate)
Inner exception type: Microsoft.SqlServer.Configuration.Sco.ScoException
Message:
Attempted to perform an unauthorized operation.
HResult : 0x84bb0001
FacilityCode : 1211 (4bb)
ErrorCode : 1 (0001)
Data:
WatsonData =
HKEY_LOCAL_MACHINE@SOFTWARE\Microsoft\Microsoft SQL Server\MSSQL12.TRAJECTORY2014\Setup
Stack:
at Microsoft.SqlServer.Configuration.Sco.InternalRegistryKey.OpenSubKey(String subkey, RegistryAccess requestedAccess)
at Microsoft.SqlServer.Configuration.Sco.SqlRegistryKey.OpenSubKey(String subkey, RegistryAccess requestedAccess)
at Microsoft.SqlServer.Discovery.DiscoveryUtils.GetLocalMachineSubKey(ServiceContainer ctx, String machineName, RegistryView regView, String regPath, RegistryAccess registryAccess)
at Microsoft.SqlServer.Discovery.DiscoveryEnumObject.GetInstanceMapObject(String machineName, RegistryView registryView, String instanceId, String instanceName, String
instanceType, String instanceSuffix, UpgradedInstanceStateEnum instanceState)
at Microsoft.SqlServer.Discovery.DiscoveryEnumObject.GetInstanceMapCollectionInHive(String machineName, RegistryView regView, List`1 subKeys)
at Microsoft.SqlServer.Discovery.DiscoveryEnumObject.GetInstanceMapCollection()
at Microsoft.SqlServer.Discovery.Instance.GetData(EnumResult erParent)
at Microsoft.SqlServer.Management.Sdk.Sfc.Environment.GetData()
at Microsoft.SqlServer.Management.Sdk.Sfc.Environment.GetData(Request req, Object ci)
at Microsoft.SqlServer.Management.Sdk.Sfc.Enumerator.GetData(Object connectionInfo, Request request)
at Microsoft.SqlServer.Management.Sdk.Sfc.Enumerator.Process(Object connectionInfo, Request request)
Inner exception type: System.UnauthorizedAccessException
Message:
Attempted to perform an unauthorized operation.
HResult : 0x80070005
Stack:
at Microsoft.SqlServer.Configuration.Sco.InternalRegistryKey.OpenSubKey(String subkey, RegistryAccess requestedAccess) -
Error while installing SQL Server 2008 R2 in Windows 7 SP1 machine
Hi Team,
Error while installing SQL Server 2008 R2 in Windows 7 SP1 machine. I can confirm this machine has .Net
Feature enabled and with Latest version.
TITLE: Microsoft SQL Server 2008 R2 Setup
The following error has occurred:
Error 25541.Failed to open XML file C:\Windows\Microsoft.NET\Framework\v2.0.50727\CONFIG\machine.config, system error: -2147024786
Regards,
Muthukumar.S.P.Hi,
Can you follow workaround mentioned in below msdn blog
http://blogs.msdn.com/b/astebner/archive/2007/11/01/5826719.aspx
As per the blog you have to open the msi log files which must be located at
C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log
In MSI log files search for the error mentioned in blog. Below link will help you read setup log files
http://msdn.microsoft.com/en-gb/library/ms143702%28v=sql.105%29.aspx
PS: Please read links carefully and patiently and if it does not solves issue please post summary.txt file and details.txt file on skydrive for analysis
Please mark this reply as answer if it solved your issue or vote as helpful if it helped so that other forum members can benefit from it
My Technet Articles -
We have purchased a new computer that has Win 8.1 Pro. We are migrating an application from a Win 7 Pro machine we are currently successfully using (the vendor migrates it for us) and they have said that the application will require the installation of SQL
Server 2008 Express (which we do have on our Win 7 machine).
In looking at the requirements for SQL Server 2008 Express (on the download page for it), it does not mention it being compatible with Win 8.1
In addition, Installation Instructions says that it requires:
Microsoft .Net Framework 3.5 SP1
Windows Installer 4.5.
Windows PowerShell 1.0
I see that 3.5 is already listed as a program feature of Win8.1 and I've enabled it. Do I need to install SP1? I downloaded it, and launched it, and nothing happened.
I also looked at the Windows Installer 4.5 download page, and it's not clear if that is compatible with 8.1. Do I need to download and install it?
Power Shell 2.0 is already installed. I assume that will be backwards compatible with PowerShell 1.0; is that correct?
I saw another question about SQL Server Express Compatibility with Win 8.1 (http://social.technet.microsoft.com/Forums/windows/en-US/038ec00e-4fc1-41ba-9fdc-21c022aad67e/action?threadDisplayName=sql-server-express-compatibility-with-windows-81) and the response
said that SQL Server Express 2012 will work, but the link contained in the answer led to a page for SQL Server Express 2014.
My vendor has told me that SQL SERver Express 2012 will be backwards compatible with their product. But they said that I would first have to install 2008 first. Is that correct for Win 8.1?
So, the ultimate questions are:
1. What is the link for Sql Server 2012 Express for Win 8.1?
2. Will the SQL Server 2012 Express download require prior install of the 2008 version
3. What other component requirements are required for SQL Server 2012 Express, and how can I determine if they have already been installed. (This is a brand new computer with a clean Win8.1 Install).
4. Finally, can we use the 2014 version of SQL Server Express for Win 8.1? If so, questions 1, 2 and 3 apply, too.
Thanks for your help on this!! HIGH ANXIETY.Hello,
The following article provides which updates are required to make SQL Server versions compatible with Windows 8 or 8.1:
http://support.microsoft.com/kb/2681562/en-us
1. You can use the product updates feature on SQL Server 2012 to make it compatible with Window 8.1. Apply SP1 as described on the following
article:
http://www.sqlcoffee.com/SQLServer2012_0008.htm
2. No.
3. Download and install .NET Framework 4.0 and enable .NET Framework 3.5. For more information:
http://www.sqlcoffee.com/SQLServer2012_0017.htm
4. Yes, you can use SQL Server 2014 with Windows 8.1. Please refer to the Support article provided above.
Hope this helps.
Regards,
Alberto Morillo
SQLCoffee.com -
SQL Server 2008 Installation on Windows 7
I tried to install SQL Server 2008 on a Windows 7 Home Premium 64 bit (Enterprise Edition Trial Edition). The system check was ok and the installation started successfully but at the end there were some errors. In the logfile there were stacktraces describing failures trying write operations on the registry. What can I do to install SQL Server 2008 on my operating system?
Hello ChunSong Feng,
thanks for your advice. Herewith I send you the text parts from detail.txt with the detailed error description. The whole file is too big to send as content.
Thanks in advance:
2009-11-17 21:05:10 Slp: ReplaceAccountWithSidInSddl -- SDDL to be returned: D:(A;CI;KR;;;S-1-5-21-2556463381-1186548668-390171815-1028)
2009-11-17 21:05:10 Slp: Prompting user if they want to retry this action due to the following failure:
2009-11-17 21:05:10 Slp: ----------------------------------------
2009-11-17 21:05:10 Slp: The following is an exception stack listing the exceptions in outermost to innermost order
2009-11-17 21:05:10 Slp: Inner exceptions are being indented
2009-11-17 21:05:10 Slp:
2009-11-17 21:05:10 Slp: Exception type: Microsoft.SqlServer.Configuration.Sco.ScoException
2009-11-17 21:05:10 Slp: Message:
2009-11-17 21:05:10 Slp: Es wurde versucht, einen nicht autorisierten Vorgang auszuführen.
2009-11-17 21:05:10 Slp: Data:
2009-11-17 21:05:10 Slp: WatsonData = Microsoft SQL Server
2009-11-17 21:05:10 Slp: DisableRetry = true
2009-11-17 21:05:10 Slp: Inner exception type: System.UnauthorizedAccessException
2009-11-17 21:05:10 Slp: Message:
2009-11-17 21:05:10 Slp: Es wurde versucht, einen nicht autorisierten Vorgang auszuführen.
2009-11-17 21:05:10 Slp: Stack:
2009-11-17 21:05:10 Slp: bei System.Security.AccessControl.Win32.GetSecurityInfo(ResourceType resourceType, String name, SafeHandle handle, AccessControlSections accessControlSections, RawSecurityDescriptor& resultSd)
2009-11-17 21:05:10 Slp: bei System.Security.AccessControl.NativeObjectSecurity.CreateInternal(ResourceType resourceType, Boolean isContainer, String name, SafeHandle handle, AccessControlSections includeSections, Boolean createByName, ExceptionFromErrorCode exceptionFromErrorCode, Object exceptionContext)
2009-11-17 21:05:10 Slp: bei Microsoft.SqlServer.Configuration.Sco.SqlRegistrySecurity..ctor(ResourceType resourceType, SafeRegistryHandle handle, AccessControlSections includeSections)
2009-11-17 21:05:10 Slp: bei Microsoft.SqlServer.Configuration.Sco.SqlRegistrySecurity.Create(InternalRegistryKey key)
2009-11-17 21:05:10 Slp: bei Microsoft.SqlServer.Configuration.Sco.InternalRegistryKey.SetSecurityDescriptor(String sddl, Boolean overwrite)
2009-11-17 21:05:10 Slp: ----------------------------------------
2009-11-17 21:05:28 Slp: User has chosen to cancel this action
2009-11-17 21:05:30 Slp: Sco: Attempting to write hklm registry key SOFTWARE\Microsoft\Microsoft SQL Server to file C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20091117_204850\Registry_SOFTWARE_Microsoft_Microsoft SQL Server.reg_
2009-11-17 21:05:30 Slp: Sco: Attempting to write hklm registry key SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall to file C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20091117_204850\Registry_SOFTWARE_Microsoft_Windows_CurrentVersion_Uninstall.reg_
2009-11-17 21:05:30 Slp: Sco: Attempting to write hklm registry key SOFTWARE\Microsoft\MSSQLServer to file C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20091117_204850\Registry_SOFTWARE_Microsoft_MSSQLServer.reg_
2009-11-17 21:05:30 Slp: Sco: Attempting to write hklm registry key SOFTWARE\Wow6432Node\Microsoft\Microsoft SQL Server to file C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20091117_204850\Registry_SOFTWARE_Wow6432Node_Microsoft_Microsoft SQL Server.reg_
2009-11-17 21:05:30 Slp: Sco: Attempting to write hklm registry key SOFTWARE\Wow6432Node\Microsoft\Windows\CurrentVersion\Uninstall to file C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20091117_204850\Registry_SOFTWARE_Wow6432Node_Microsoft_Windows_CurrentVersion_Uninstall.reg_
2009-11-17 21:05:30 Slp: Sco: Attempting to write hklm registry key SOFTWARE\Wow6432Node\Microsoft\MSSQLServer to file C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20091117_204850\Registry_SOFTWARE_Wow6432Node_Microsoft_MSSQLServer.reg_
2009-11-17 21:05:44 Slp: Es wurde versucht, einen nicht autorisierten Vorgang auszuführen.
2009-11-17 21:05:45 Slp: Watson bucket for exception based failure has been created
2009-11-17 21:05:45 SQLBrowser: SQL Server Browser Install for feature 'SQL_Browser_Redist_SqlBrowser_Cpu32' failed with cancel exception: Microsoft.SqlServer.Configuration.Sco.ScoException: Es wurde versucht, einen nicht autorisierten Vorgang auszuführen. ---> System.UnauthorizedAccessException: Es wurde versucht, einen nicht autorisierten Vorgang auszuführen.
bei System.Security.AccessControl.Win32.GetSecurityInfo(ResourceType resourceType, String name, SafeHandle handle, AccessControlSections accessControlSections, RawSecurityDescriptor& resultSd)
bei System.Security.AccessControl.NativeObjectSecurity.CreateInternal(ResourceType resourceType, Boolean isContainer, String name, SafeHandle handle, AccessControlSections includeSections, Boolean createByName, ExceptionFromErrorCode exceptionFromErrorCode, Object exceptionContext)
bei Microsoft.SqlServer.Configuration.Sco.SqlRegistrySecurity..ctor(ResourceType resourceType, SafeRegistryHandle handle, AccessControlSections includeSections)
bei Microsoft.SqlServer.Configuration.Sco.SqlRegistrySecurity.Create(InternalRegistryKey key)
bei Microsoft.SqlServer.Configuration.Sco.InternalRegistryKey.SetSecurityDescriptor(String sddl, Boolean overwrite)
--- Ende der internen Ausnahmestapelüberwachung ---
bei Microsoft.SqlServer.Configuration.Sco.InternalRegistryKey.SetSecurityDescriptor(String sddl, Boolean overwrite)
bei Microsoft.SqlServer.Configuration.Sco.SqlRegistryKey.SetSecurityDescriptor(String sddl, Boolean overwrite)
bei Microsoft.SqlServer.Configuration.SqlBrowser.SqlBrowserPrivateConfigBase.SetSecurityDescriptorByLocation(String sRegLocation, RegistryView regView, String sSddl, Boolean bOptional)
bei Microsoft.SqlServer.Configuration.SqlBrowser.SqlBrowserPrivateConfigBase.ApplyRegPermissions(XmlNodeList xmlNodeListRegPermissions, Dictionary`2 dictionaryGroups, Dictionary`2 dicLocationFragments)
bei Microsoft.SqlServer.Configuration.SqlBrowser.SqlBrowserPrivateConfig.ApplyRegCommonPermissions(XmlElement xmlRootPermissions, Dictionary`2 dictionaryGroups, Dictionary`2 dicLocationFragments)
bei Microsoft.SqlServer.Configuration.SqlBrowser.SqlBrowserPrivateConfig.ApplyPermissions(String sXmlPermissionsFile, String sBrowserPrincipal)
bei Microsoft.SqlServer.Configuration.SqlBrowser.SqlBrowserPrivateConfig.ConfigStaticProperties(SqlBrowserPublicConfig publicConfigSqlBrowser)
bei Microsoft.SqlServer.Configuration.SqlBrowser.SqlBrowserPrivateConfig.ExecConfigNonRC(SqlBrowserPublicConfig publicConfigSqlBrowser)
bei Microsoft.SqlServer.Configuration.SqlBrowser.SqlBrowserPrivateConfig.SelectAndExecTiming(ConfigActionTiming timing, Dictionary`2 actionData, PublicConfigurationBase spcbPublicConfig)
bei Microsoft.SqlServer.Configuration.SqlBrowser.SqlBrowserPrivateConfigBase.ExecWithRetry(ConfigActionTiming timing, Dictionary`2 actionData, PublicConfigurationBase spcbPublicConfig).
2009-11-17 21:05:45 SQLBrowser: The last attempted operation: Der '(A;CI;KR;;;[SQLServer2005SQLBrowserUser$UTAS-URMEL])'-Zugriffssteuerungseintrag wird dem Registrierungsschlüssel 'SOFTWARE\Microsoft\Microsoft SQL Server' in der 'Wow6432'-Sicht hinzugefügt, um den SQL Server Browser-Dienst zu konfigurieren..
2009-11-17 21:05:45 Slp: Fehler bei der Konfigurationsaktion für Feature SQL_Browser_Redist während der Zeitangabe ConfigNonRC und Szenario ConfigNonRC.
2009-11-17 21:05:45 Slp: Es wurde versucht, einen nicht autorisierten Vorgang auszuführen.
2009-11-17 21:05:45 Slp: Fehler bei der Konfigurationsaktion für Feature SQL_Browser_Redist während der Zeitangabe ConfigNonRC und Szenario ConfigNonRC.
2009-11-17 21:05:45 Slp: Microsoft.SqlServer.Configuration.Sco.ScoException: Es wurde versucht, einen nicht autorisierten Vorgang auszuführen. ---> System.UnauthorizedAccessException: Es wurde versucht, einen nicht autorisierten Vorgang auszuführen.
2009-11-17 21:05:45 Slp: bei System.Security.AccessControl.Win32.GetSecurityInfo(ResourceType resourceType, String name, SafeHandle handle, AccessControlSections accessControlSections, RawSecurityDescriptor& resultSd)
2009-11-17 21:05:45 Slp: bei System.Security.AccessControl.NativeObjectSecurity.CreateInternal(ResourceType resourceType, Boolean isContainer, String name, SafeHandle handle, AccessControlSections includeSections, Boolean createByName, ExceptionFromErrorCode exceptionFromErrorCode, Object exceptionContext)
2009-11-17 21:05:45 Slp: bei Microsoft.SqlServer.Configuration.Sco.SqlRegistrySecurity..ctor(ResourceType resourceType, SafeRegistryHandle handle, AccessControlSections includeSections)
2009-11-17 21:05:45 Slp: bei Microsoft.SqlServer.Configuration.Sco.SqlRegistrySecurity.Create(InternalRegistryKey key)
2009-11-17 21:05:45 Slp: bei Microsoft.SqlServer.Configuration.Sco.InternalRegistryKey.SetSecurityDescriptor(String sddl, Boolean overwrite)
2009-11-17 21:05:45 Slp: --- Ende der internen Ausnahmestapelüberwachung ---
2009-11-17 21:05:45 Slp: bei Microsoft.SqlServer.Configuration.Sco.InternalRegistryKey.SetSecurityDescriptor(String sddl, Boolean overwrite)
2009-11-17 21:05:45 Slp: bei Microsoft.SqlServer.Configuration.Sco.SqlRegistryKey.SetSecurityDescriptor(String sddl, Boolean overwrite)
2009-11-17 21:05:45 Slp: bei Microsoft.SqlServer.Configuration.SqlBrowser.SqlBrowserPrivateConfigBase.SetSecurityDescriptorByLocation(String sRegLocation, RegistryView regView, String sSddl, Boolean bOptional)
2009-11-17 21:05:45 Slp: bei Microsoft.SqlServer.Configuration.SqlBrowser.SqlBrowserPrivateConfigBase.ApplyRegPermissions(XmlNodeList xmlNodeListRegPermissions, Dictionary`2 dictionaryGroups, Dictionary`2 dicLocationFragments)
2009-11-17 21:05:45 Slp: bei Microsoft.SqlServer.Configuration.SqlBrowser.SqlBrowserPrivateConfig.ApplyRegCommonPermissions(XmlElement xmlRootPermissions, Dictionary`2 dictionaryGroups, Dictionary`2 dicLocationFragments)
2009-11-17 21:05:45 Slp: bei Microsoft.SqlServer.Configuration.SqlBrowser.SqlBrowserPrivateConfig.ApplyPermissions(String sXmlPermissionsFile, String sBrowserPrincipal)
2009-11-17 21:05:45 Slp: bei Microsoft.SqlServer.Configuration.SqlBrowser.SqlBrowserPrivateConfig.ConfigStaticProperties(SqlBrowserPublicConfig publicConfigSqlBrowser)
2009-11-17 21:05:45 Slp: bei Microsoft.SqlServer.Configuration.SqlBrowser.SqlBrowserPrivateConfig.ExecConfigNonRC(SqlBrowserPublicConfig publicConfigSqlBrowser)
2009-11-17 21:05:45 Slp: bei Microsoft.SqlServer.Configuration.SqlBrowser.SqlBrowserPrivateConfig.SelectAndExecTiming(ConfigActionTiming timing, Dictionary`2 actionData, PublicConfigurationBase spcbPublicConfig)
2009-11-17 21:05:45 Slp: bei Microsoft.SqlServer.Configuration.SqlBrowser.SqlBrowserPrivateConfigBase.ExecWithRetry(ConfigActionTiming timing, Dictionary`2 actionData, PublicConfigurationBase spcbPublicConfig)
2009-11-17 21:05:45 Slp: bei Microsoft.SqlServer.Configuration.SqlBrowser.SqlBrowserPrivateConfig.Install(ConfigActionTiming timing, Dictionary`2 actionData, PublicConfigurationBase spcbPublicConfig)
2009-11-17 21:05:45 Slp: bei Microsoft.SqlServer.Configuration.SqlConfigBase.SlpConfigAction.ExecuteAction(String actionId)
2009-11-17 21:05:45 Slp: bei Microsoft.SqlServer.Configuration.SqlConfigBase.SlpConfigAction.Execute(String actionId, TextWriter errorStream)
2009-11-17 21:05:45 Slp: Ausnahme: Microsoft.SqlServer.Configuration.Sco.ScoException.
2009-11-17 21:05:45 Slp: Quelle: Microsoft.SqlServer.Configuration.Sco.
2009-11-17 21:05:45 Slp: Meldung: Es wurde versucht, einen nicht autorisierten Vorgang auszuführen..
2009-11-17 21:05:45 Slp: Innere Ausnahme:
2009-11-17 21:05:45 Slp: Ausnahme: System.UnauthorizedAccessException.
2009-11-17 21:05:45 Slp: Quelle: mscorlib.
2009-11-17 21:05:45 Slp: Meldung: Es wurde versucht, einen nicht autorisierten Vorgang auszuführen..
2009-11-17 21:05:45 Slp: Completed Action: SqlBro
2009-11-17 21:05:50 Slp: Prompting user if they want to retry this action due to the following failure:
2009-11-17 21:05:50 Slp: ----------------------------------------
2009-11-17 21:05:50 Slp: The following is an exception stack listing the exceptions in outermost to innermost order
2009-11-17 21:05:50 Slp: Inner exceptions are being indented
2009-11-17 21:05:50 Slp:
2009-11-17 21:05:50 Slp: Exception type: Microsoft.SqlServer.Configuration.Sco.ScoException
2009-11-17 21:05:50 Slp: Message:
2009-11-17 21:05:50 Slp: Es wurde versucht, einen nicht autorisierten Vorgang auszuführen.
2009-11-17 21:05:50 Slp: Data:
2009-11-17 21:05:50 Slp: WatsonData = 100
2009-11-17 21:05:50 Slp: DisableRetry = true
2009-11-17 21:05:50 Slp: Inner exception type: System.UnauthorizedAccessException
2009-11-17 21:05:50 Slp: Message:
2009-11-17 21:05:50 Slp: Es wurde versucht, einen nicht autorisierten Vorgang auszuführen.
2009-11-17 21:05:50 Slp: Stack:
2009-11-17 21:05:50 Slp: bei System.Security.AccessControl.Win32.GetSecurityInfo(ResourceType resourceType, String name, SafeHandle handle, AccessControlSections accessControlSections, RawSecurityDescriptor& resultSd)
2009-11-17 21:05:50 Slp: bei System.Security.AccessControl.NativeObjectSecurity.CreateInternal(ResourceType resourceType, Boolean isContainer, String name, SafeHandle handle, AccessControlSections includeSections, Boolean createByName, ExceptionFromErrorCode exceptionFromErrorCode, Object exceptionContext)
2009-11-17 21:05:50 Slp: bei Microsoft.SqlServer.Configuration.Sco.SqlRegistrySecurity..ctor(ResourceType resourceType, SafeRegistryHandle handle, AccessControlSections includeSections)
2009-11-17 21:05:50 Slp: bei Microsoft.SqlServer.Configuration.Sco.SqlRegistrySecurity.Create(InternalRegistryKey key)
2009-11-17 21:05:50 Slp: bei Microsoft.SqlServer.Configuration.Sco.InternalRegistryKey.SetSecurityDescriptor(String sddl, Boolean overwrite)
2009-11-17 21:05:50 Slp: ----------------------------------------
2009-11-17 21:05:57 Slp: User has chosen to cancel this action
2009-11-17 21:05:58 Slp: Sco: Attempting to write hklm registry key SOFTWARE\Microsoft\Microsoft SQL Server to file C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20091117_204850\Registry_SOFTWARE_Microsoft_Microsoft SQL Server.reg_
2009-11-17 21:05:59 Slp: Sco: Attempting to write hklm registry key SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall to file C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20091117_204850\Registry_SOFTWARE_Microsoft_Windows_CurrentVersion_Uninstall.reg_
2009-11-17 21:05:59 Slp: Sco: Attempting to write hklm registry key SOFTWARE\Microsoft\MSSQLServer to file C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20091117_204850\Registry_SOFTWARE_Microsoft_MSSQLServer.reg_
2009-11-17 21:05:59 Slp: Sco: Attempting to write hklm registry key SOFTWARE\Wow6432Node\Microsoft\Microsoft SQL Server to file C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20091117_204850\Registry_SOFTWARE_Wow6432Node_Microsoft_Microsoft SQL Server.reg_
2009-11-17 21:05:59 Slp: Sco: Attempting to write hklm registry key SOFTWARE\Wow6432Node\Microsoft\Windows\CurrentVersion\Uninstall to file C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20091117_204850\Registry_SOFTWARE_Wow6432Node_Microsoft_Windows_CurrentVersion_Uninstall.reg_
2009-11-17 21:05:59 Slp: Sco: Attempting to write hklm registry key SOFTWARE\Wow6432Node\Microsoft\MSSQLServer to file C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20091117_204850\Registry_SOFTWARE_Wow6432Node_Microsoft_MSSQLServer.reg_
2009-11-17 21:06:17 Slp: Es wurde versucht, einen nicht autorisierten Vorgang auszuführen.
2009-11-17 21:06:17 Slp: Watson bucket for exception based failure has been created
2009-11-17 21:06:17 SSIS: Failed to set registry permission on key 'SOFTWARE\Microsoft\Microsoft SQL Server\100' to SID 'S-1-5-21-2556463381-1186548668-390171815-1029'. Error: 'Es wurde versucht, einen nicht autorisierten Vorgang auszuführen.'
2009-11-17 21:06:17 Slp: ReplaceAccountWithSidInSddl -- SDDL to be returned: D:(A;OICI;KR;;;S-1-5-21-2556463381-1186548668-390171815-1029)
2009-11-17 21:06:17 Slp: Prompting user if they want to retry this action due to the following failure:
2009-11-17 21:06:17 Slp: ----------------------------------------
2009-11-17 21:06:17 Slp: The following is an exception stack listing the exceptions in outermost to innermost order
2009-11-17 21:06:17 Slp: Inner exceptions are being indented
2009-11-17 21:06:17 Slp:
2009-11-17 21:06:17 Slp: Exception type: Microsoft.SqlServer.Configuration.Sco.ScoException
2009-11-17 21:06:17 Slp: Message:
2009-11-17 21:06:17 Slp: Es wurde versucht, einen nicht autorisierten Vorgang auszuführen.
2009-11-17 21:06:17 Slp: Data:
2009-11-17 21:06:17 Slp: WatsonData = SSIS
2009-11-17 21:06:17 Slp: DisableRetry = true
2009-11-17 21:06:17 Slp: Inner exception type: System.UnauthorizedAccessException
2009-11-17 21:06:17 Slp: Message:
2009-11-17 21:06:17 Slp: Es wurde versucht, einen nicht autorisierten Vorgang auszuführen.
2009-11-17 21:06:17 Slp: Stack:
2009-11-17 21:06:17 Slp: bei System.Security.AccessControl.Win32.GetSecurityInfo(ResourceType resourceType, String name, SafeHandle handle, AccessControlSections accessControlSections, RawSecurityDescriptor& resultSd)
2009-11-17 21:06:17 Slp: bei System.Security.AccessControl.NativeObjectSecurity.CreateInternal(ResourceType resourceType, Boolean isContainer, String name, SafeHandle handle, AccessControlSections includeSections, Boolean createByName, ExceptionFromErrorCode exceptionFromErrorCode, Object exceptionContext)
2009-11-17 21:06:17 Slp: bei Microsoft.SqlServer.Configuration.Sco.SqlRegistrySecurity..ctor(ResourceType resourceType, SafeRegistryHandle handle, AccessControlSections includeSections)
2009-11-17 21:06:17 Slp: bei Microsoft.SqlServer.Configuration.Sco.SqlRegistrySecurity.Create(InternalRegistryKey key)
2009-11-17 21:06:17 Slp: bei Microsoft.SqlServer.Configuration.Sco.InternalRegistryKey.SetSecurityDescriptor(String sddl, Boolean overwrite)
2009-11-17 21:06:17 Slp: ----------------------------------------
2009-11-17 21:06:24 Slp: User has chosen to cancel this action
2009-11-17 21:06:26 Slp: Sco: Attempting to write hklm registry key SOFTWARE\Microsoft\Microsoft SQL Server to file C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20091117_204850\Registry_SOFTWARE_Microsoft_Microsoft SQL Server.reg_
2009-11-17 21:06:26 Slp: Sco: Attempting to write hklm registry key SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall to file C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20091117_204850\Registry_SOFTWARE_Microsoft_Windows_CurrentVersion_Uninstall.reg_
2009-11-17 21:06:26 Slp: Sco: Attempting to write hklm registry key SOFTWARE\Microsoft\MSSQLServer to file C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20091117_204850\Registry_SOFTWARE_Microsoft_MSSQLServer.reg_
2009-11-17 21:06:26 Slp: Sco: Attempting to write hklm registry key SOFTWARE\Wow6432Node\Microsoft\Microsoft SQL Server to file C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20091117_204850\Registry_SOFTWARE_Wow6432Node_Microsoft_Microsoft SQL Server.reg_
2009-11-17 21:06:26 Slp: Sco: Attempting to write hklm registry key SOFTWARE\Wow6432Node\Microsoft\Windows\CurrentVersion\Uninstall to file C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20091117_204850\Registry_SOFTWARE_Wow6432Node_Microsoft_Windows_CurrentVersion_Uninstall.reg_
2009-11-17 21:06:26 Slp: Sco: Attempting to write hklm registry key SOFTWARE\Wow6432Node\Microsoft\MSSQLServer to file C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20091117_204850\Registry_SOFTWARE_Wow6432Node_Microsoft_MSSQLServer.reg_
2009-11-17 21:06:47 Slp: Es wurde versucht, einen nicht autorisierten Vorgang auszuführen.
2009-11-17 21:06:47 Slp: Watson bucket for exception based failure has been created
2009-11-17 21:06:47 SSIS: Failed to set registry permission on key 'SOFTWARE\Microsoft\Microsoft SQL Server\100\SSIS' to SID 'S-1-5-21-2556463381-1186548668-390171815-1029'. Error: 'Es wurde versucht, einen nicht autorisierten Vorgang auszuführen.'
2009-11-17 21:06:47 Slp: Sco: Attempting to open registry subkey SOFTWARE\Microsoft\Windows NT\CurrentVersion\Perflib
2009-11-17 21:06:47 Slp: ReplaceAccountWithSidInSddl -- SDDL to be returned: D:(A;OICI;KR;;;S-1-5-21-2556463381-1186548668-390171815-1029)(A;CI;KR;;;LU)(A;CI;KR;;;MU)
2009-11-17 21:06:47 Slp: Prompting user if they want to retry this action due to the following failure:
2009-11-17 21:06:47 Slp: ----------------------------------------
2009-11-17 21:06:47 Slp: The following is an exception stack listing the exceptions in outermost to innermost order
2009-11-17 21:06:47 Slp: Inner exceptions are being indented
2009-11-17 21:06:47 Slp:
2009-11-17 21:06:47 Slp: Exception type: Microsoft.SqlServer.Configuration.Sco.ScoException
2009-11-17 21:06:47 Slp: Message:
2009-11-17 21:06:47 Slp: Es wurde versucht, einen nicht autorisierten Vorgang auszuführen.
2009-11-17 21:06:47 Slp: Data:
2009-11-17 21:06:47 Slp: WatsonData = Perflib
2009-11-17 21:06:47 Slp: DisableRetry = true
2009-11-17 21:06:47 Slp: Inner exception type: System.UnauthorizedAccessException
2009-11-17 21:06:47 Slp: Message:
2009-11-17 21:06:47 Slp: Es wurde versucht, einen nicht autorisierten Vorgang auszuführen.
2009-11-17 21:06:47 Slp: Stack:
2009-11-17 21:06:47 Slp: bei System.Security.AccessControl.Win32.GetSecurityInfo(ResourceType resourceType, String name, SafeHandle handle, AccessControlSections accessControlSections, RawSecurityDescriptor& resultSd)
2009-11-17 21:06:47 Slp: bei System.Security.AccessControl.NativeObjectSecurity.CreateInternal(ResourceType resourceType, Boolean isContainer, String name, SafeHandle handle, AccessControlSections includeSections, Boolean createByName, ExceptionFromErrorCode exceptionFromErrorCode, Object exceptionContext)
2009-11-17 21:06:47 Slp: bei Microsoft.SqlServer.Configuration.Sco.SqlRegistrySecurity..ctor(ResourceType resourceType, SafeRegistryHandle handle, AccessControlSections includeSections)
2009-11-17 21:06:47 Slp: bei Microsoft.SqlServer.Configuration.Sco.SqlRegistrySecurity.Create(InternalRegistryKey key)
2009-11-17 21:06:47 Slp: bei Microsoft.SqlServer.Configuration.Sco.InternalRegistryKey.SetSecurityDescriptor(String sddl, Boolean overwrite)
2009-11-17 21:06:47 Slp: ----------------------------------------
2009-11-17 21:06:52 Slp: User has chosen to cancel this action -
I read this kb - http://support.microsoft.com/kb/2681562/en-us, but doesn't get exact answer.
I need to install vWorkspace 8 on server w2k12. It install SQL Server 2008 Express during installation and I got error.
So, is it possible to install Microsoft SQL Server 2008 (R2) Express on windows server 2012 (not R2) ?I read this kb - http://support.microsoft.com/kb/2681562/en-us, but doesn't get exact answer.
I need to install vWorkspace 8 on server w2k12. It install SQL Server 2008 Express during installation and I got error.
So, is it possible to install Microsoft SQL Server 2008 (R2) Express on windows server 2012 (not R2) ?
Yes you can install SQL server 2008 express on windows 2012 OS see below link
http://msdn.microsoft.com/en-us/library/ms143506(v=sql.100).aspx#Express32
Please mark this reply as the answer or vote as helpful, as appropriate, to make it useful for other readers -
SQL Server 2012 Express on Window 8.1 64 bit version?
Hi,
I´m trying to install SQL Server 2012 Express on Windows 8.1 64 bit version. When I reach the point of "Installing Setup Files", of the installation process, the installation seems to halt. I´ve tried both the 32 bit and 64 bit versions of SQL 2012
Express. I´ve installed SQL 2012 Express several times before on other Windows versions but I´ve never encountered this problem. Is it a known SQL Server 2012 Express/Windows 8.1 64 bit compability problem?
Thanks in advance!
MartinSQL Server 2012 express can be installed in windows 8.1 all you need to take care is that you meet
hardware and software requirements . Please read the article in hyperlink carefully.Make sure you have internet connection because it is required. Make sure you meet all .net
framework requirements
Below link would be helpful as well.
How to use SQL server on Windows 8 environment
Please remove any previous failed installation of SQL server from add remove program. If you still face issue please refer to Solution section of
this link for manual un installation.
Finally you can locate log files present at location
C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log\summry.txt for details about log
Please mark this reply as answer if it solved your issue or vote as helpful if it helped so that other forum members can benefit from it.
My TechNet Wiki Articles -
SSMS for SQL Server 2012 Express on Windows Embedded 8 Standard
Hello,
I have installed SQL Server 2012 Express with Advanced Tools (SQLEXPRADV_x64_ENU.exe, downloaded from MS website) on Windows Embedded 8 Standard 64-bit. But, when I try to find SQL Server Management Studio, I realized it's not installed (same installation
package works fine on my Windows 8.1 Pro 64-bit laptop, where SSMS gets installed). How do I fix this? And any other ways for trouble-shooting DBs on Windows Embedded 8 Standard?
Thanks,
JayBelow is the content of a summary file for the installation. BTW, I also try to find its ConfigurationFile.ini file for future installation on other computers, but it's not in the folder specified in the summary file either (see below).
Thanks.
Overall summary:
Final result: Passed
Exit code (Decimal): 0
Start time: 2014-04-15 13:57:59
End time: 2014-04-15 14:13:29
Requested action: Install
Machine Properties:
Machine name: AIMB-584
Machine processor count: 4
OS version: Future Windows Version
OS service pack:
OS region: United States
OS language: English (United States)
OS architecture: x64
Process architecture: 64 Bit
OS clustered: No
Product features discovered:
Product Instance Instance ID Feature
Language Edition Version Clustered
Package properties:
Description: Microsoft SQL Server 2012 Service Pack 1
ProductName: SQL Server 2012
Type: RTM
Version: 11
SPLevel: 0
Installation location: c:\e089c9dde791653620\x64\setup\
Installation edition: Express
Product Update Status:
None discovered.
User Input Settings:
ACTION: Install
ADDCURRENTUSERASSQLADMIN: true
AGTSVCACCOUNT: NT AUTHORITY\NETWORK SERVICE
AGTSVCPASSWORD: *****
AGTSVCSTARTUPTYPE: Disabled
ASBACKUPDIR: Backup
ASCOLLATION: Latin1_General_CI_AS
ASCONFIGDIR: Config
ASDATADIR: Data
ASLOGDIR: Log
ASPROVIDERMSOLAP: 1
ASSERVERMODE: MULTIDIMENSIONAL
ASSVCACCOUNT: <empty>
ASSVCPASSWORD: <empty>
ASSVCSTARTUPTYPE: Automatic
ASSYSADMINACCOUNTS: <empty>
ASTEMPDIR: Temp
BROWSERSVCSTARTUPTYPE: Automatic
CLTCTLRNAME: <empty>
CLTRESULTDIR: <empty>
CLTSTARTUPTYPE: 0
CLTSVCACCOUNT: <empty>
CLTSVCPASSWORD: <empty>
CLTWORKINGDIR: <empty>
COMMFABRICENCRYPTION: 0
COMMFABRICNETWORKLEVEL: 0
COMMFABRICPORT: 0
CONFIGURATIONFILE:
CTLRSTARTUPTYPE: 0
CTLRSVCACCOUNT: <empty>
CTLRSVCPASSWORD: <empty>
CTLRUSERS: <empty>
ENABLERANU: true
ENU: true
ERRORREPORTING: false
FEATURES: SQLENGINE, REPLICATION, FULLTEXT, RS, BIDS, BOL, SSMS, SNAC_SDK, LOCALDB
FILESTREAMLEVEL: 0
FILESTREAMSHARENAME: <empty>
FTSVCACCOUNT: NT Service\MSSQLFDLauncher$SQLEXPRESS
FTSVCPASSWORD: <empty>
HELP: false
IACCEPTSQLSERVERLICENSETERMS: false
INDICATEPROGRESS: false
INSTALLSHAREDDIR: C:\Program Files\Microsoft SQL Server\
INSTALLSHAREDWOWDIR: C:\Program Files (x86)\Microsoft SQL Server\
INSTALLSQLDATADIR: <empty>
INSTANCEDIR: C:\Program Files\Microsoft SQL Server\
INSTANCEID: SQLEXPRESS
INSTANCENAME: SQLEXPRESS
ISSVCACCOUNT: NT AUTHORITY\Network Service
ISSVCPASSWORD: <empty>
ISSVCSTARTUPTYPE: Automatic
MATRIXCMBRICKCOMMPORT: 0
MATRIXCMSERVERNAME: <empty>
MATRIXNAME: <empty>
NPENABLED: 0
PID: *****
QUIET: false
QUIETSIMPLE: false
ROLE: AllFeatures_WithDefaults
RSINSTALLMODE: DefaultNativeMode
RSSHPINSTALLMODE: DefaultSharePointMode
RSSVCACCOUNT: NT Service\ReportServer$SQLEXPRESS
RSSVCPASSWORD: <empty>
RSSVCSTARTUPTYPE: Automatic
SAPWD: *****
SECURITYMODE: SQL
SQLBACKUPDIR: <empty>
SQLCOLLATION: SQL_Latin1_General_CP1_CI_AS
SQLSVCACCOUNT: NT Service\MSSQL$SQLEXPRESS
SQLSVCPASSWORD: *****
SQLSVCSTARTUPTYPE: Automatic
SQLSYSADMINACCOUNTS: AIMB-584\User
SQLTEMPDBDIR: <empty>
SQLTEMPDBLOGDIR: <empty>
SQLUSERDBDIR: <empty>
SQLUSERDBLOGDIR: <empty>
SQMREPORTING: false
TCPENABLED: 0
UIMODE: AutoAdvance
UpdateEnabled: true
UpdateSource: MU
X86: false
Configuration file: C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log\20140415_135512\ConfigurationFile.ini
Detailed results:
Feature: Management Tools - Basic
Status: Passed
Feature: SQL Server Data Tools
Status: Passed
Feature: Reporting Services - Native
Status: Passed
Feature: Database Engine Services
Status: Passed
Feature: Full-Text and Semantic Extractions for Search
Status: Passed
Feature: SQL Server Replication
Status: Passed
Feature: SQL Browser
Status: Passed
Feature: Documentation Components
Status: Passed
Feature: SQL Writer
Status: Passed
Feature: LocalDB
Status: Passed
Feature: SQL Client Connectivity
Status: Passed
Feature: SQL Client Connectivity SDK
Status: Passed
Rules with failures:
Global rules:
Scenario specific rules:
Rules report file: C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log\20140415_135512\SystemConfigurationCheck_Report.htm -
SQL Server not functional after Windows Sysprep
Hello!
I sysprep generalized a full configured Windows Server 2012 Standard copy with SQL Server 2012 configured on it but not set up using the sysprep prepare method. I only want to generalize the windows copy but have the SQL install work as previously configured.
After i boot back into the server after the generalize finishes i am unable to access the SQL server using windows authentication even after i changed the computer name and use the same user accounts as before. I have seen the sysprep prepare for imaging
documentation for syspreping an SQL instance however i already have SQL installed and i just want to migrate this install to newer hardware. Does anyone have any advice for this? Thank you.Hello Kabitokaii,
It seems that sql server is not recognizing your new computer name. Since your new name is different from the name when SQL Server has been installed, you have to change the also in sys.servers....
you can query the name by submitting the following statement: (once you´re told you can´t connect only with windows autentication, i`m assumin that you can connect with SQL Server autentication.)
SELECT * FROM SYS.SERVERS.
If the names are different (from SYS.SERVERS to current machine name), you have to change is, following the bellow steps:
http://www.mssqltips.com/sqlservertip/2525/steps-to-change-the-server-name-for-a-sql-server-machine/
Steps to rename SQL Server
Execute the below commands for each instance on the machine.
-- for a Default Instance
sp_dropserver <old_physical_server_name>
GO
sp_addserver <new_name>, local
GO
--for a Named Instance
sp_dropserver <'old_physical_server_name\instancename'>
GO
sp_addserver <'new_name\instancename'>, local
GO
</new_name></old_physical_server_name>
Restart the SQL Server services.
Execute the below query in each instance to verify the updated system metadata.
SELECT @@SERVERNAME
Edvaldo Castro http://edvaldocastro.com MCITP Database Administrator on SQL Server® 2008 MCITP Database Administrator on SQL Server® 2005 MCTS: SQL Server® 2008 MCTS: SQL Server® 2005 MCT: Microsoft Certified Trainer MTA: Microsoft Technology Associate
MTAC – Microsoft Technical Audience Contributor CCSQLA – Cambridge Certified SQL Associate TOEIC – Test of English for International Communication -
Free Download Sql Server 2012 Full for windows 7 64 bit
hi,
im new here and i want to download sql server 2012 complete for windows 7 64 bit.
If any one help me to find it.You need to buy SQL Server 2012 Developer Edition for 50$ or as Shanky_621 suggested
download a free edition named SQL EXPRESS which has some limitations.
Best Regards,Uri Dimant SQL Server MVP,
http://sqlblog.com/blogs/uri_dimant/
MS SQL optimization: MS SQL Development and Optimization
MS SQL Consulting:
Large scale of database and data cleansing
Remote DBA Services:
Improves MS SQL Database Performance
SQL Server Integration Services:
Business Intelligence -
How do you install windows XP on macbook and use microsoft access
how do you install windows XP on macbook and use microsoft access?
there are two methods to intall windows on your macbook
1st is through Parellel software
2nd is through Boot camp. -
How to install SQL server 2008 express on Windows server 2008 R2 standard OS
Hi,
I have Windows server 2008 R2 Standard edition (64-bit) and trying to install SQL server 2008 express edition since I do not have SQL server 2008. When I install it I am unable to see Management Studio so I am trying to install management studio as well
but still I am facing issue. Please let me know whether SQL server 2008 express edition is compatible with Windows server 2008 R2 Standard. If not then pls let me know the proper steps to install it.
RegdsHello,
Service Pack 1 for SQL Server 2008 is required to be compatible with Windows Server 2008 R2.
Please download QL Server 2008 Express with SP1 included from the following link:
http://www.microsoft.com/en-us/download/details.aspx?id=25052
Hope this helps.
Regards,
Alberto Morillo
SQLCoffee.com -
Install Guide - SQL Server 2014, Failover Cluster, Windows 2012 R2 Server Core
I am looking for anyone who has a guide with notes about an installation of a two node, multi subnet failover cluster for SQL Server 2014 on Server Core edition
Hi KamarasJaranger,
According to your description, you want configure a SQL Server 2014 Multi-Subnet failover Cluster on Windows Server 2012 R2. Below are the whole steps for the configuration. For the detailed steps about the configuration, please download
and refer to the
PDF file.
1.Add Required Windows Features (.NET Framework 3.5 Features, Failover Clustering and Multipath I/O).
2.Discover target portals.
3.Connect targets and configuring Multipathing.
4.Initialize and format the Disks.
5.Verify the Storage Replication Process.
6.Run the Failover Cluster Validation Wizard.
7.Create the Windows Server 2012 R2 Multi-Subnet Cluster.
8.Tune Cluster Heartbeat Settings.
9.Install SQL Server 2014 on a Multi-Subnet Failover Cluster.
10.Add a Node on a SQL Server 2014 Multi-Subnet Cluster.
11.Tune the SQL Server 2014 Failover Clustered Instance DNS Settings.
12.Test application connectivity.
Regards,
Michelle Li -
SQL Server 2008 R2 on Windows 2012 R2
It appears I cannot install SS2008 R2 on WS2012 R2. I get the following:
'Your version of Microsoft SQL Server (2008 and 2008 R2) isn't compatible with this version of Windows.'
Can someone please confirm this and when this issue might be resolved?Hello,
Please try a slipstream installation of SQL Server 2008 R2 + SP2 using the following article:
http://blogs.msdn.com/b/petersad/archive/2011/07/13/how-to-slipstream-sql-server-2008-r2-and-a-sql-server-2008-r2-service-pack-1-sp1.aspx
Hope this helps.
Regards,
Alberto Morillo
SQLCoffee.com -
Overlapped I/O error 997 installing SQL Server 2014 Express on Windows Server 2012 R2
I'm attempting to install SQL Server 2014 Express on a Windows Server 2012 R2 system. When I do the install, it fails (several times) with an "Error: 997. Overlapped I/O operation is in progress.". From searching the web, I can see many people
have had this problem with this installer and other non-SQL server installers.
I've tried every solution I can find discussed, but none help with my problems The system is fully updated, with the exception of the KB2538243 (VC 2008 SP1 redist), which is probably failing for the same reason.
I've tried removing several updates mentioned in other articles (KB2918614). I've confirmed that I'm not using a temporary profile.
Does anyone have an idea of how I can solve this issue?
Thanks,
Zack
Partial detail from install log file:
Detailed results:
Feature: Management Tools - Complete
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, and then try the setup process again.
Component name: Microsoft Visual Studio 2010 Redistributables
Component error code: 997
Component log file: C:\Program Files\Microsoft SQL Server\120\Setup Bootstrap\Log\20150205_151618\VC10Redist_Cpu64_1.log
Error description: Error 997.Overlapped I/O operation is in progress.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=12.0.2000.8&EvtType=vc_red.msi%40ProcessComponents%40997
Feature: Client Tools Connectivity
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, and then try the setup process again.
Component name: Microsoft Visual Studio 2010 Redistributables
Component error code: 997
Component log file: C:\Program Files\Microsoft SQL Server\120\Setup Bootstrap\Log\20150205_151618\VC10Redist_Cpu64_1.log
Error description: Error 997.Overlapped I/O operation is in progress.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=12.0.2000.8&EvtType=vc_red.msi%40ProcessComponents%40997
Partial detail from component log file:
MSI (s) (D8:3C) [15:18:29:173]: Resolving source.
MSI (s) (D8:3C) [15:18:29:173]: Resolving source to launched-from source.
MSI (s) (D8:3C) [15:18:29:173]: Setting launched-from source as last-used.
MSI (s) (D8:3C) [15:18:29:188]: PROPERTY CHANGE: Adding SourceDir property. Its value is 'C:\Users\zerhart\Downloads\SQLEXPRWT_x64_ENU\redist\VisualStudioShell\VC10SP1\x64\'.
MSI (s) (D8:3C) [15:18:29:188]: PROPERTY CHANGE: Adding SOURCEDIR property. Its value is 'C:\Users\zerhart\Downloads\SQLEXPRWT_x64_ENU\redist\VisualStudioShell\VC10SP1\x64\'.
MSI (s) (D8:3C) [15:18:29:188]: PROPERTY CHANGE: Adding SourcedirProduct property. Its value is '{1D8E6291-B0D5-35EC-8441-6616F567A0F7}'.
MSI (s) (D8:3C) [15:18:29:188]: SOURCEDIR ==> C:\Users\zerhart\Downloads\SQLEXPRWT_x64_ENU\redist\VisualStudioShell\VC10SP1\x64\
MSI (s) (D8:3C) [15:18:29:188]: SOURCEDIR product ==> {1D8E6291-B0D5-35EC-8441-6616F567A0F7}
MSI (s) (D8:3C) [15:18:29:188]: SECREPAIR: A general error running CryptAcquireContext
MSI (s) (D8:3C) [15:18:29:188]: Determining source type
MSI (s) (D8:3C) [15:18:29:188]: Source type from package 'VC_RED.MSI': 2
MSI (s) (D8:3C) [15:18:29:188]: SECREPAIR: Hash Database: C:\Windows\Installer\SourceHash{1D8E6291-B0D5-35EC-8441-6616F567A0F7}
MSI (s) (D8:3C) [15:18:29:188]: SECREPAIR: SourceHash database file already exists. Deleting it.
MSI (s) (D8:3C) [15:18:29:204]: Note: 1: 2262 2: SourceHash 3: -2147287038
MSI (s) (D8:3C) [15:18:29:235]: SECREPAIR: New Hash Database creation complete.
MSI (s) (D8:3C) [15:18:29:235]: SECREPAIR: Crypt Provider not initialized. Error:0
MSI (s) (D8:3C) [15:18:29:235]: SECREPAIR: Crypt Provider not initialized. Error:0
MSI (s) (D8:3C) [15:18:29:235]: SECREPAIR: Crypt Provider not initialized. Error:0
MSI (s) (D8:3C) [15:18:29:235]: SECREPAIR: Crypt Provider not initialized. Error:0
MSI (s) (D8:3C) [15:18:29:235]: SECREPAIR: Crypt Provider not initialized. Error:0
MSI (s) (D8:3C) [15:18:29:235]: SECREPAIR: Crypt Provider not initialized. Error:0
MSI (s) (D8:3C) [15:18:29:235]: SECREPAIR: Crypt Provider not initialized. Error:997
MSI (s) (D8:3C) [15:18:29:235]: SECUREREPAIR: Failed to CreateContentHash of the file: install.res.1040.dll: for computing its hash. Error: 997
MSI (s) (D8:3C) [15:18:29:235]: SECREPAIR: Failed to create hash for the install source files
MSI (s) (D8:3C) [15:18:29:235]: SECUREREPAIR: SecureRepair Failed. Error code: 3e561F257D8
Action start 15:18:29: ProcessComponents.
MSI (s) (D8:3C) [15:19:28:843]:
Error 997.Overlapped I/O operation is in progress.Alberto,
Thanks for your help. Unfortunately, I've already tried that. I did try it again and I get an "This update is not applicable to your computer."
I tried to post the Windows Update log, but it was too large. I've posted some of it below.
Here is the WU log:
2015-02-06 11:24:25:793
5048 50
Misc =========== Logging initialized (build: 7.9.9600.17489, tz: -0500) ===========
2015-02-06 11:24:25:793
5048 50
Misc = Process: C:\Windows\system32\wusa.exe
2015-02-06 11:24:25:793
5048 50
Misc = Module: C:\Windows\System32\wuapi.dll
2015-02-06 11:24:25:793
5048 50
COMAPI ----------- COMAPI: IUpdateServiceManager::AddScanPackageService -----------
2015-02-06 11:24:25:793
5048 50
COMAPI - ServiceName = Windows Update Standalone Installer
2015-02-06 11:24:25:793
5048 50
COMAPI - ScanFileLocation = C:\c5f288db3c43a7e4613232ca1a3c\wsusscan.cab
2015-02-06 11:24:25:808
920 111c
Misc =========== Logging initialized (build: 7.9.9600.17489, tz: -0500) ===========
2015-02-06 11:24:25:808
920 111c
Misc = Process: C:\Windows\system32\svchost.exe
2015-02-06 11:24:25:808
920 111c
Misc = Module: c:\windows\system32\wuaueng.dll
2015-02-06 11:24:25:808
920 111c
Service *************
2015-02-06 11:24:25:808
920 111c
Service ** START ** Service: Service startup
2015-02-06 11:24:25:808
920 111c
Service *********
2015-02-06 11:24:25:824
920 111c
IdleTmr Non-AoAc machine. Aoac operations will be ignored.
2015-02-06 11:24:25:824
920 111c
Agent * WU client version 7.9.9600.17489
2015-02-06 11:24:25:824
920 111c
Agent WARNING: SleepStudyTracker: Machine is non-AOAC. Sleep study tracker disabled.
2015-02-06 11:24:25:824
920 111c
Agent * Base directory: C:\Windows\SoftwareDistribution
2015-02-06 11:24:25:824
920 111c
Agent * Access type: No proxy
2015-02-06 11:24:25:824
920 111c
Service UpdateNetworkState Ipv6, cNetworkInterfaces = 12.
2015-02-06 11:24:25:824
920 111c
Service UpdateNetworkState Ipv4, cNetworkInterfaces = 4.
2015-02-06 11:24:25:824
920 111c
Agent * Network state: Connected
2015-02-06 11:24:25:824
920 111c
Service UpdateNetworkState Ipv6, cNetworkInterfaces = 12.
2015-02-06 11:24:25:824
920 111c
Service UpdateNetworkState Ipv4, cNetworkInterfaces = 4.
2015-02-06 11:24:25:855
920 b64
Misc WARNING: Network Cost is assumed to be not supported as something failed with trying to get handles to wcmapi.dll
2015-02-06 11:24:25:855
920 111c
Agent *********** Agent: Initializing global settings cache ***********
2015-02-06 11:24:25:887
920 111c
Agent * Endpoint Provider: 00000000-0000-0000-0000-000000000000
2015-02-06 11:24:25:887
920 111c
Agent * WSUS server: <NULL>
2015-02-06 11:24:25:887
920 111c
Agent * WSUS status server: <NULL>
2015-02-06 11:24:25:887
920 111c
Agent * Target group: (Unassigned Computers)
2015-02-06 11:24:25:887
920 111c
Agent * Windows Update access disabled: No
2015-02-06 11:24:25:902
920 b64
WuTask WuTaskManager delay initialize completed successfully..
2015-02-06 11:24:25:902
920 b64
AU Timer: 31DA7559-FE27-4810-8FF6-987195B1FD98, Expires 2015-02-07 08:14:01, not idle-only, not network-only
2015-02-06 11:24:25:902
920 b64
AU Timer: CF1ABEC6-7887-4964-BB93-B2E21B31CEC1, Expires 2015-02-06 19:30:54, not idle-only, not network-only
2015-02-06 11:24:25:902
920 b64
AU Timer: 29A863E7-8609-4D1E-B7CD-5668F857F1DB, Expires 2015-02-06 19:30:54, not idle-only, not network-only
2015-02-06 11:24:25:902
920 b64
Report WARNING: CSerializationHelper:: InitSerialize failed : 0x80070002
2015-02-06 11:24:25:902
920 b64
Report CWERReporter::Init succeeded
2015-02-06 11:24:25:902
920 b64
Agent *********** Agent: Initializing Windows Update Agent ***********
2015-02-06 11:24:25:902
920 b64
DnldMgr Download manager restoring 0 downloads
2015-02-06 11:24:25:902
920 111c
AU ########### AU: Initializing Automatic Updates ###########
2015-02-06 11:24:25:902
920 111c
AU AIR Mode is disabled
2015-02-06 11:24:25:902
920 111c
AU # Approval type: Scheduled (User preference)
2015-02-06 11:24:25:902
920 111c
AU # Auto-install minor updates: Yes (User preference)
2015-02-06 11:24:25:902
920 111c
AU # Will interact with non-admins (Non-admins are elevated (User preference))
2015-02-06 11:24:25:902
920 111c
Misc WARNING: IsSessionRemote: WinStationQueryInformationW(WTSIsRemoteSession) failed for session 2, GetLastError=2250
2015-02-06 11:24:25:918
920 111c
AU WARNING: Failed to get Wu Exemption info from NLM, assuming not exempt, error = 0x80240037
2015-02-06 11:24:25:918
920 111c
AU WARNING: Failed to get Network Cost info from NLM, assuming network is NOT metered, error = 0x80240037
2015-02-06 11:24:25:918
920 111c
AU AU finished delayed initialization
2015-02-06 11:24:25:933
920 111c
AU WARNING: Failed to get Network Cost info from NLM, assuming network is NOT metered, error = 0x80240037
2015-02-06 11:24:25:933
920 111c
AU WARNING: Failed to get Network Cost info from NLM, assuming network is NOT metered, error = 0x80240037
2015-02-06 11:24:25:933
920 b64
Misc Validating signature for C:\Windows\SoftwareDistribution\ScanFile\a487aa0f-3e53-4fee-a784-6171b00254e4\Source.cab with dwProvFlags 0x00000080:
2015-02-06 11:24:25:933
920 111c
AU Adding timer:
2015-02-06 11:24:25:933
920 111c
AU Timer: 31DA7559-FE27-4810-8FF6-987195B1FD98, Expires 2015-02-07 08:14:01, not idle-only, not network-only
2015-02-06 11:24:25:949
920 af0
DnldMgr Asking handlers to reconcile their sandboxes
2015-02-06 11:24:25:949
920 b64
Misc Microsoft signed: Yes
2015-02-06 11:24:26:154
920 b64
DtaStor Default service for AU is {7971F918-A847-4430-9279-4A52D1EFE18D}
2015-02-06 11:24:26:154
920 b64
IdleTmr Incremented idle timer priority operation counter to 1
2015-02-06 11:24:26:154
5048 50
COMAPI - Added scan package service, ServiceID = {A487AA0F-3E53-4FEE-A784-6171B00254E4} Third party service
2015-02-06 11:24:26:154
5048 50
COMAPI -------------
2015-02-06 11:24:26:154
5048 50
COMAPI -- START -- COMAPI: Init Search [ClientId = wusa]
2015-02-06 11:24:26:154
5048 50
COMAPI ---------
2015-02-06 11:24:26:154
5048 50
COMAPI -------------
2015-02-06 11:24:26:154
5048 50
COMAPI -- START -- COMAPI: Search [ClientId = wusa]
2015-02-06 11:24:26:154
5048 50
COMAPI ---------
2015-02-06 11:24:26:169
920 b64
IdleTmr WU operation (CSearchCall::Init ID 1) started; operation # 17; does use network; is not at background priority
2015-02-06 11:24:26:169
920 b64
IdleTmr Incremented idle timer priority operation counter to 2
2015-02-06 11:24:26:341
920 b64
Report *********** Report: Initializing static reporting data ***********
2015-02-06 11:24:26:341
920 b64
Report * OS Version = 6.3.9600.0.0.131344
2015-02-06 11:24:26:341
920 b64
Report * OS Product Type = 0x00000021
2015-02-06 11:24:26:357
920 b64
Report * Computer Brand = PowerSpec
2015-02-06 11:24:26:357
920 b64
Report * Computer Model = S Series
2015-02-06 11:24:26:357
920 b64
Report * Platform Role = 1
2015-02-06 11:24:26:357
920 b64
Report * AlwaysOn/AlwaysConnected (AOAC) = 0
2015-02-06 11:24:26:357
920 b64
Report * Bios Revision = 1.1a
2015-02-06 11:24:26:357
920 b64
Report * Bios Name = 1.1a
2015-02-06 11:24:26:357
920 b64
Report * Bios Release Date = 2013-08-20T00:00:00
2015-02-06 11:24:26:357
920 b64
Report * Bios Sku Number = S Series
2015-02-06 11:24:26:357
920 b64
Report * Bios Vendor = American Megatrends Inc.
2015-02-06 11:24:26:357
920 b64
Report * Bios Family = Server
2015-02-06 11:24:26:357
920 b64
Report * Bios Major Release = 4
2015-02-06 11:24:26:357
920 b64
Report * Bios Minor Release = 6
2015-02-06 11:24:26:357
920 b64
Report * Locale ID = 1033
2015-02-06 11:24:26:357
920 b64
Handler Calculating current update level for this session
[ Omitted data ]
http://support.microsoft.com/?kbid=3000850, timestamp 01d039c57a22c0be
2015-02-06 11:24:28:388
920 b64
Handler Done calculating current update level for this session
2015-02-06 11:24:28:982
920 b64
Agent *** START *** Queueing Finding updates [CallerId = wusa Id = 1]
2015-02-06 11:24:28:982
5048 50
COMAPI <<-- SUBMITTED -- COMAPI: Search [ClientId = wusa]
2015-02-06 11:24:28:982
920 11f4
Agent *** END *** Queueing Finding updates [CallerId = wusa Id = 1]
2015-02-06 11:24:28:982
920 11f4
Agent *************
2015-02-06 11:24:28:982
920 11f4
Agent ** START ** Agent: Finding updates [CallerId = wusa Id = 1]
2015-02-06 11:24:28:982
920 11f4
Agent *********
2015-02-06 11:24:28:982
920 11f4
Agent * Online = Yes; Ignore download priority = No
2015-02-06 11:24:28:982
920 11f4
Agent * Criteria = "DeploymentAction='Installation'"
2015-02-06 11:24:28:982
920 11f4
Agent * ServiceID = {A487AA0F-3E53-4FEE-A784-6171B00254E4} Third party service
2015-02-06 11:24:28:982
920 11f4
Agent * Search Scope = {Machine}
2015-02-06 11:24:28:982
920 11f4
Agent * Caller SID for Applicability: S-1-5-21-3157695610-3447843402-2534478823-500
2015-02-06 11:24:28:982
920 11f4
Agent * RegisterService is set
2015-02-06 11:24:29:185
920 11f4
PT +++++++++++ PT: Synchronizing server updates +++++++++++
2015-02-06 11:24:29:185
920 11f4
PT + Offline serviceId = {A487AA0F-3E53-4FEE-A784-6171B00254E4}
2015-02-06 11:24:29:185
920 11f4
PT WARNING: Cached cookie has expired or new PID is available
2015-02-06 11:24:29:185
920 11f4
Agent Reading cached app categories using lifetime 604800 seconds
2015-02-06 11:24:29:185
920 11f4
Agent Read 0 cached app categories
2015-02-06 11:24:29:185
920 11f4
Agent SyncUpdates adding 0 visited app categories
2015-02-06 11:24:29:294
920 11f4
Agent Reading cached app categories using lifetime 604800 seconds
2015-02-06 11:24:29:294
920 11f4
Agent Read 0 cached app categories
2015-02-06 11:24:29:294
920 11f4
Agent SyncUpdates adding 0 visited app categories
2015-02-06 11:24:29:357
920 11f4
Agent Reading cached app categories using lifetime 604800 seconds
2015-02-06 11:24:29:357
920 11f4
Agent Read 0 cached app categories
2015-02-06 11:24:29:357
920 11f4
Agent SyncUpdates adding 0 visited app categories
2015-02-06 11:24:29:638
920 11f4
Agent Reading cached app categories using lifetime 604800 seconds
2015-02-06 11:24:29:638
920 11f4
Agent Read 0 cached app categories
2015-02-06 11:24:29:638
920 11f4
Agent SyncUpdates adding 0 visited app categories
2015-02-06 11:24:30:013
920 11f4
Agent Reading cached app categories using lifetime 604800 seconds
2015-02-06 11:24:30:013
920 11f4
Agent Read 0 cached app categories
2015-02-06 11:24:30:013
920 11f4
Agent SyncUpdates adding 0 visited app categories
2015-02-06 11:24:30:044
920 11f4
Agent Reading cached app categories using lifetime 604800 seconds
2015-02-06 11:24:30:044
920 11f4
Agent Read 0 cached app categories
2015-02-06 11:24:30:044
920 11f4
Agent SyncUpdates adding 0 visited app categories
2015-02-06 11:24:30:044
920 11f4
PT + SyncUpdates round trips: 5
2015-02-06 11:24:30:076
920 11f4
PT +++++++++++ PT: Synchronizing extended update info +++++++++++
2015-02-06 11:24:30:076
920 11f4
PT + Offline serviceId = {A487AA0F-3E53-4FEE-A784-6171B00254E4}
2015-02-06 11:24:30:138
920 11f4
Agent * Found 0 updates and 54 categories in search; evaluated appl. rules of 126 out of 284 deployed entities
2015-02-06 11:24:30:138
920 11f4
Agent *********
2015-02-06 11:24:30:138
920 11f4
Agent ** END ** Agent: Finding updates [CallerId = wusa Id = 1]
2015-02-06 11:24:30:138
920 11f4
Agent *************
2015-02-06 11:24:30:138
920 11f4
IdleTmr WU operation (CSearchCall::Init ID 1, operation # 17) stopped; does use network; is not at background priority
2015-02-06 11:24:30:138
920 11f4
IdleTmr Decremented idle timer priority operation counter to 1
2015-02-06 11:24:30:154
5048 1428
COMAPI >>-- RESUMED -- COMAPI: Search [ClientId = wusa]
2015-02-06 11:24:30:154
5048 1428
COMAPI - Updates found = 0
2015-02-06 11:24:30:154
5048 1428
COMAPI ---------
2015-02-06 11:24:30:154
5048 1428
COMAPI -- END -- COMAPI: Search [ClientId = wusa]
2015-02-06 11:24:30:154
5048 1428
COMAPI -------------
Maybe you are looking for
-
IPhoto Events not used elsewhere
I have noticed that AppleTV, my iPod Classic and most other apps don't recognize Events in iPhoto. It's really annoying to look at photos on my iPod or AppleTV and just see this one huge list of photos. Why are Events not recognized outside of iPhoto
-
Themes not working properly after updating to Bell...
I updated to Belle Refresh on my Nokia C7-00 via OTA update... However recently I have noticed that while changing the theme (installed in E:/ ) it is taking too as long as 10 minutes to change all its icons, and other things... However if I close th
-
Hi, Scenario: I am defining many instances of Omniportlet with different data sources etc. Now, can I export/import these portlets as war/ear files. In short, I want to deploy the same omniportlets that I defined on one application server into many a
-
How could this query be coded?
I'm racking my brain trying to figure this one out...this is an old query of mine being retooled... DB has a field for MONTH and a field for YEAR...as well as HOURS for each record. This query is pulling a sum of hours for a date range, that will be
-
Extension Manager CS4 invalid token in xmanconfig.xml
Hi, When I try to start Extension Manager CS4 2.1 I get an error saying that there is an invalid tokenvalue in XManConfig.xml (see attached screenshot, it's in Dutch ). The version of Extension Manager is 2.1.112. Extension Manager is used in a netwo