SQL Server Express causing log in difficulties....
All-
Well, I'm not out of the woods yet. I've discovered that my issues of logging in to RHS Config Manager (admin/admin, but then nothing happens when I click Sign-In) returns when I select SQL Server Express. This despite the fact that the Config Mgr's Test Connection function shows success (see graphic below). Any ideas what might be going on?
BTW, is there any source which shows screen shots of EXACTLY how SQL Server Express, Tomcat, and RH Server needs to be set up? I see that others in the forum have had similar frustration with this question.
What do you mean by 3rd party libraries? Is the normal oledb provider using
SMO fine to your requirement?
I believe your question would be a better one in a dedicated C++ forum.
Similar Messages
-
SQL Server Express Performance Limitations With OGC Methods on Geometry Instances
I will front load my question. Specifically, I am wondering if any of the feature restrictions with SQL Server Express cause performance limitations/reductions with OGC methods on geometry instances, e.g., STIntersects? I have spent time reading
various documents about the different editions of SQL Server, including the Features Supported by the Editions of SQL Server 2014, but nothing is jumping out at me. The
limited information on spatial features in the aforementioned document implies spatial is the same across all editions. I am hoping this is wrong.
The situation.... I have roughly 200,000 tax parcels within 175 taxing districts. As part of a consistency check between what is stored in tax records for taxing district and what is identified spatially, I set up a basic point-in-polygon query
to identify the taxing district spatially and then count the number of parcels within in taxing district. Surprisingly, the query took 66 minutes to run. As I pointed out, this is being run on a test machine with SQL Server Express.
Some specifics.... I wrote the query a few different ways and compared the execution plans, and the optimizer always choose the same plan, which is good I guess since it means it is doing its job. The execution plans show a 'Clustered Index Seek
(Spatial)' being used and only costing 1%. Coming in at 75% cost is a Filter, which appears to be connected to the STIntersects predicate. I brute forced alternate execution plans using HINTS, but they only turned out worse, which I guess is also
good since it means the optimizer did choose a good plan. I experimented some with changing the spatial index parameters, but the impact of the options I tried was never that much. I ended up going with "Geometry Auto Grid" with 16 cells
per object.
So, why do I think 66 minutes is excessive? The reason is that I loaded the same data sets into PostgreSQL/PostGIS, used a default spatial index, and the same query ran in 5 minutes. Same machine, same data, SQL Server Express is 13x slower than
PostgreSQL. That is why I think 66 minutes is excessive.
Our organization is mostly an Oracle and SQL Server shop. Since more of my background and experience are with MS databases, I prefer to work with SQL Server. I really do want to understand what is happening here. Is there something I can
do different to get more performance out of SQL Server? Does spatial run slower on Express versus Standard or Enterprise? Given I did so little tuning in PostgreSQL, I still can't understand the results I am seeing.
I may or may not be able to strip the data down enough to be able to send it to someone.Tessalating the polygons (tax districts) is the answer!
Since my use of SQL Server Express was brought up as possibly contributing to the slow runtime, the first thing I did was download an evaluation version of Enterprise Edition. The runtime on Enterprise Edition dropped from 66 minutes to 57.5 minutes.
A reduction of 13% isn't anything to scoff at, but total runtime was still 11x longer than in PostgreSQL. Although Enterprise Edition had 4 cores available to it, it never really spun up more than 1 when executing the query, so it doesn't seem
to have been parallelizing the query much, if at all.
You asked about polygon complexity. Overall, a majority are fairly simple but there are some complex ones with one really complex polygon. Using the complexity index discussed in the reference thread, the tax districts had an average complexity
of 4.6 and a median of 2.7. One polygon had a complexity index of 120, which was skewing the average, as well as increasing the runtime I suspect. Below is a complexity index breakdown:
Index
NUM_TAX_DIST
1
6
<2
49
<3
44
<4
23
<5
11
<6
9
<7
9
<8
4
<9
1
<10
4
>=10
14
Before trying tessellation, I tweaked the spatial indexes in several different ways, but the runtimes never changed by more than a minute or two. I reset the spatial indexes to "geometry auto grid @ 32" and tried out your tessellation functions
using the default of 5000 vertices. Total runtime 2.3 minutes, a 96% reduction and twice as fast as PostgresSQL! Now that is more what I was expecting before i started.
I tried using different thresholds, 3,000 and 10,000 vertices but the runtimes were slightly slower, 3.5 and 3.3 minutes respectively. A threshold of 5000 definitely seems to be a sweet spot for the dataset I am using. As the thread you referenced
discussed, SQL Server spatial functions like STIntersect appear to be sensitive to the number of vertices of polygons.
After reading your comment, it reminded me of some discussions with Esri staff about ArcGIS doing the same thing in certain circumstances, but I didn't go as far as thinking to apply it here. So, thanks for the suggestion and code from another post.
Once I realized the SRID was hard coded to 0 in tvf_QuarterPolygon, I was able to update the code to set it to the same as the input shape, and then everything came together nicely. -
Having issues with getting SQL Server Express to start services and run.
Good afternoon everyone,
I have been working on a 2012 R2 server getting ready to move databases to new hardware. I had SQL Server Express 2008 R2 running on this server with no issues. I was handed another software package that ran SQL Express 2012 and had to for compatibility
reasons. I have had multiple versions run on Server 2012 before with no issues. This time, not so lucky. When the installer from the updated package put on SQL Express 2012 it completed with errors ( error log posted at the end of post) and
would not allow me to run software. I then tried the db that I had installed on 2008 R2 and it also gave the same error as the 2012 version. IN basic terms the required services attempted to start and shut back down again. I have received
Error 1068 about database handles and error %%945. I know this db has plenty of space and the permissions were added for the Admin account to access both db's. I then uninstalled both versions and tried again, with the same errors listed when
I tried to start the services. I am thinking that a clean install would fix the issue however I am not certain what files/folders/reg entries need to be deleted or modified. I have researched all the errors I can find, however I am very
new with SQL anything so I know I am missing something. I also do not have an "E:" drive on this server (not sure why it is going there). Input would be very welcome as I am not certain where to go from here.
Thanks,
Matt
Error Log follows, server and domain names have been blacked out with ****.
2015-04-15 11:57:55.16 Server Microsoft SQL Server 2012 (SP1) - 11.0.3128.0 (X64)
Dec 28 2012 20:23:12
Copyright (c) Microsoft Corporation
Express Edition (64-bit) on Windows NT 6.2 <X64> (Build 9200: ) (Hypervisor)
2015-04-15 11:57:55.16 Server (c) Microsoft Corporation.
2015-04-15 11:57:55.16 Server All rights reserved.
2015-04-15 11:57:55.16 Server Server process ID is 4104.
2015-04-15 11:57:55.16 Server System Manufacturer: 'HP', System Model: 'ProLiant ML350p Gen8'.
2015-04-15 11:57:55.16 Server Authentication mode is WINDOWS-ONLY.
2015-04-15 11:57:55.16 Server Logging SQL Server messages in file 'C:\Program Files\Microsoft SQL Server\MSSQL11.SQLEXPRESS\MSSQL\Log\ERRORLOG'.
2015-04-15 11:57:55.17 Server The service account is 'NT AUTHORITY\LOCAL SERVICE'. This is an informational message; no user action is required.
2015-04-15 11:57:55.17 Server Registry startup parameters:
-d C:\Program Files\Microsoft SQL Server\MSSQL11.SQLEXPRESS\MSSQL\DATA\master.mdf
-e C:\Program Files\Microsoft SQL Server\MSSQL11.SQLEXPRESS\MSSQL\Log\ERRORLOG
-l C:\Program Files\Microsoft SQL Server\MSSQL11.SQLEXPRESS\MSSQL\DATA\mastlog.ldf
2015-04-15 11:57:55.17 Server Command Line Startup Parameters:
-s "SQLEXPRESS"
2015-04-15 11:57:55.48 Server SQL Server detected 1 sockets with 6 cores per socket and 12 logical processors per socket, 12 total logical processors; using 8 logical processors based on SQL Server licensing. This is an informational message;
no user action is required.
2015-04-15 11:57:55.48 Server SQL Server is starting at normal priority base (=7). This is an informational message only. No user action is required.
2015-04-15 11:57:55.48 Server Detected 8157 MB of RAM. This is an informational message; no user action is required.
2015-04-15 11:57:55.48 Server Using conventional memory in the memory manager.
2015-04-15 11:57:55.68 Server This instance of SQL Server last reported using a process ID of 7840 at 4/15/2015 11:57:47 AM (local) 4/15/2015 3:57:47 PM (UTC). This is an informational message only; no user action is required.
2015-04-15 11:57:55.68 Server Node configuration: node 0: CPU mask: 0x00000000000000ff:0 Active CPU mask: 0x00000000000000ff:0. This message provides a description of the NUMA configuration for this computer. This is an informational message
only. No user action is required.
2015-04-15 11:57:55.69 Server Using dynamic lock allocation. Initial allocation of 2500 Lock blocks and 5000 Lock Owner blocks per node. This is an informational message only. No user action is required.
2015-04-15 11:57:55.72 Server Software Usage Metrics is disabled.
2015-04-15 11:57:55.73 spid5s Starting up database 'master'.
2015-04-15 11:57:55.79 spid5s 20 transactions rolled forward in database 'master' (1:0). This is an informational message only. No user action is required.
2015-04-15 11:57:55.79 spid5s 0 transactions rolled back in database 'master' (1:0). This is an informational message only. No user action is required.
2015-04-15 11:57:55.80 Server CLR version v4.0.30319 loaded.
2015-04-15 11:57:55.86 spid5s Service Master Key could not be decrypted using one of its encryptions. See sys.key_encryptions for details.
2015-04-15 11:57:55.89 Server Common language runtime (CLR) functionality initialized using CLR version v4.0.30319 from C:\Windows\Microsoft.NET\Framework64\v4.0.30319\.
2015-04-15 11:57:55.91 spid5s SQL Server Audit is starting the audits. This is an informational message. No user action is required.
2015-04-15 11:57:55.91 spid5s SQL Server Audit has started the audits. This is an informational message. No user action is required.
2015-04-15 11:57:55.94 spid5s SQL Trace ID 1 was started by login "sa".
2015-04-15 11:57:55.94 spid5s Server name is '********\SQLEXPRESS'. This is an informational message only. No user action is required.
2015-04-15 11:57:55.96 spid5s Failed to verify Authenticode signature on DLL 'C:\Program Files\Microsoft SQL Server\MSSQL11.SQLEXPRESS\MSSQL\Binn\ftimport.dll'.
2015-04-15 11:57:55.96 spid5s Starting up database 'msdb'.
2015-04-15 11:57:55.96 spid9s Starting up database 'mssqlsystemresource'.
2015-04-15 11:57:55.96 spid5s Error: 17204, Severity: 16, State: 1.
2015-04-15 11:57:55.96 spid5s FCB::Open failed: Could not open file e:\sql11_main_t.obj.x86release\sql\mkmastr\databases\objfre\i386\MSDBData.mdf for file number 1. OS error: 3(The system cannot find the path specified.).
2015-04-15 11:57:55.96 spid5s Error: 5120, Severity: 16, State: 101.
2015-04-15 11:57:55.96 spid5s Unable to open the physical file "e:\sql11_main_t.obj.x86release\sql\mkmastr\databases\objfre\i386\MSDBData.mdf". Operating system error 3: "3(The system cannot find the path specified.)".
2015-04-15 11:57:55.96 spid5s Error: 17207, Severity: 16, State: 1.
2015-04-15 11:57:55.96 spid5s FileMgr::StartLogFiles: Operating system error 2(The system cannot find the file specified.) occurred while creating or opening file 'e:\sql11_main_t.obj.x86release\sql\mkmastr\databases\objfre\i386\MSDBLog.ldf'.
Diagnose and correct the operating system error, and retry the operation.
2015-04-15 11:57:55.96 spid5s File activation failure. The physical file name "e:\sql11_main_t.obj.x86release\sql\mkmastr\databases\objfre\i386\MSDBLog.ldf" may be incorrect.
2015-04-15 11:57:55.99 spid9s The resource database build version is 11.00.3000. This is an informational message only. No user action is required.
2015-04-15 11:57:56.02 spid12s A self-generated certificate was successfully loaded for encryption.
2015-04-15 11:57:56.03 spid12s Server is listening on [ 'any' <ipv6> 53345].
2015-04-15 11:57:56.03 spid12s Server is listening on [ 'any' <ipv4> 53345].
2015-04-15 11:57:56.03 spid12s Server local connection provider is ready to accept connection on [ \\.\pipe\SQLLocal\SQLEXPRESS ].
2015-04-15 11:57:56.03 spid12s Server named pipe provider is ready to accept connection on [ \\.\pipe\MSSQL$SQLEXPRESS\sql\query ].
2015-04-15 11:57:56.04 spid12s Dedicated administrator connection support was not started because it is disabled on this edition of SQL Server. If you want to use a dedicated administrator connection, restart SQL Server using the trace flag 7806.
This is an informational message only. No user action is required.
2015-04-15 11:57:56.04 Server SQL Server is attempting to register a Service Principal Name (SPN) for the SQL Server service. Kerberos authentication will not be possible until a SPN is registered for the SQL Server service. This is an informational
message. No user action is required.
2015-04-15 11:57:56.04 Server The SQL Server Network Interface library could not register the Service Principal Name (SPN) [ MSSQLSvc/********.****.local:SQLEXPRESS ] for the SQL Server service. Windows return code: 0xffffffff, state: 53.
Failure to register a SPN might cause integrated authentication to use NTLM instead of Kerberos. This is an informational message. Further action is only required if Kerberos authentication is required by authentication policies and if the SPN has not been
manually registered.
2015-04-15 11:57:56.04 Server The SQL Server Network Interface library could not register the Service Principal Name (SPN) [ MSSQLSvc/********.****.local:53345 ] for the SQL Server service. Windows return code: 0xffffffff, state: 53. Failure
to register a SPN might cause integrated authentication to use NTLM instead of Kerberos. This is an informational message. Further action is only required if Kerberos authentication is required by authentication policies and if the SPN has not been manually
registered.
2015-04-15 11:57:56.09 spid9s Starting up database 'model'.
2015-04-15 11:57:56.10 spid9s Error: 17204, Severity: 16, State: 1.
2015-04-15 11:57:56.10 spid9s FCB::Open failed: Could not open file e:\sql11_main_t.obj.x86release\sql\mkmastr\databases\objfre\i386\model.mdf for file number 1. OS error: 3(The system cannot find the path specified.).
2015-04-15 11:57:56.10 spid9s Error: 5120, Severity: 16, State: 101.
2015-04-15 11:57:56.10 spid9s Unable to open the physical file "e:\sql11_main_t.obj.x86release\sql\mkmastr\databases\objfre\i386\model.mdf". Operating system error 3: "3(The system cannot find the path specified.)".
2015-04-15 11:57:56.10 spid9s Error: 17207, Severity: 16, State: 1.
2015-04-15 11:57:56.10 spid9s FileMgr::StartLogFiles: Operating system error 2(The system cannot find the file specified.) occurred while creating or opening file 'e:\sql11_main_t.obj.x86release\sql\mkmastr\databases\objfre\i386\modellog.ldf'.
Diagnose and correct the operating system error, and retry the operation.
2015-04-15 11:57:56.10 spid9s File activation failure. The physical file name "e:\sql11_main_t.obj.x86release\sql\mkmastr\databases\objfre\i386\modellog.ldf" may be incorrect.
2015-04-15 11:57:56.10 spid9s Error: 945, Severity: 14, State: 2.
2015-04-15 11:57:56.10 spid9s Database 'model' cannot be opened due to inaccessible files or insufficient memory or disk space. See the SQL Server errorlog for details.
2015-04-15 11:57:56.10 spid9s SQL Trace was stopped due to server shutdown. Trace ID = '1'. This is an informational message only; no user action is required.
Hi HMLunger,
Did you install the SQL Server instance successfully? If not, please help to post the summary and detail logs for analysis. By default, the logs can be found in: C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log.
However, if you fail to start SQL Server Express service after successfully installing SQL Server,
you might have to change the paths of the files by running the following scripts from the command prompt. For more details, please review this similar
thread.
NET START MSSQL$SQLEXPRESS /f /T3608
SQLCMD -S .\SQLEXPRESS
ALTER DATABASE model MODIFY FILE (NAME = logical_name , FILENAME = 'new_path\os_file_name');
ALTER DATABASE model MODIFY FILE (NAME = logical_name , FILENAME = 'new_path\os_file_name');
go
exit;
ALTER DATABASE msdb MODIFY FILE (NAME = logical_name , FILENAME = 'new_path\os_file_name');
ALTER DATABASE msdb MODIFY FILE (NAME = logical_name , FILENAME = 'new_path\os_file_name');
NET STOP MSSQL$SQLEXPRESS
In addition, you can follow the steps in this KB article to uninstall SQL Server.
Thanks,
Lydia Zhang
Lydia Zhang
TechNet Community Support -
SQL Server Express 2014 on Win8.1: Could not find the Database Engine startup handle
Hello,
I tried to follow all the similarly titled posts in this forum, yet no solution seems to work, so I hope I can find some up-to-date suggestion here (most of the older posts refer to versions from 2008 to 2012...).
I have installed Visual Studio 2013 (with the latest Update 2 RC) on a freshly installed development workstation with Win 8.1 with all its updates. Now I'd want to install SQL Server 2014 Express, but the setup keeps failing with the dreaded "Could
not find the Database Engine startup handle" error (the log follows below).
What I tried:
1) download again and repair. Same error.
2) completely uninstall by launching setup.exe /Action=uninstall (success), then rebooting the OS, then installing again. Same error. I did this twice, the second time I also manually removed any directory left out in C:\Program Files etc.
When I launch the setup, I select all the components for installation in the package SQLEXPRADV_x64_ENU.exe (1.12 GB, last downloaded today -Apr 3, 2014-), and accept all the defaults including the proposed services accounts. There is no preexisting
SQL Server instance, as expected.
The setup takes its time, and finally fails with the error quoted above. I really do not want to reformat my HD and fully reconfigure my workstation, which took about 3 days... Could anyone suggest a solution to have SQL Server 2014 setup so I can start
developing instead of wasting time in administering the system?
Thanks to all! The log follows.
Overall summary:
Final result: Failed: see details below
Exit code (Decimal): -2061893607
Start time: 2014-04-03 18:30:58
End time: 2014-04-03 19:04:41
Requested action: Install
Setup completed with required actions for features.
Troubleshooting information for those features:
Next step for RS: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Next step for SQLEngine: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Next step for FullText: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Next step for Replication: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Machine Properties:
Machine name: DIOMEDES
Machine processor count: 4
OS version: Windows 8
OS service pack:
OS region: United States
OS language: English (United States)
OS architecture: x64
Process architecture: 64 Bit
OS clustered: No
Product features discovered:
Product Instance Instance ID Feature
Language Edition Version Clustered Configured
Package properties:
Description: Microsoft SQL Server 2014
ProductName: SQL Server 2014
Type: RTM
Version: 12
SPLevel: 0
Installation location: C:\Users\Daniele\Downloads\SQLEXPRADV_x64_ENU\x64\setup\
Installation edition: Express
Product Update Status:
None discovered.
User Input Settings:
ACTION: Install
ADDCURRENTUSERASSQLADMIN: true
AGTSVCACCOUNT: NT AUTHORITY\NETWORK SERVICE
AGTSVCPASSWORD: *****
AGTSVCSTARTUPTYPE: Disabled
ASBACKUPDIR: Backup
ASCOLLATION: Latin1_General_CI_AS
ASCONFIGDIR: Config
ASDATADIR: Data
ASLOGDIR: Log
ASPROVIDERMSOLAP: 1
ASSERVERMODE: MULTIDIMENSIONAL
ASSVCACCOUNT: <empty>
ASSVCPASSWORD: <empty>
ASSVCSTARTUPTYPE: Automatic
ASSYSADMINACCOUNTS: <empty>
ASTEMPDIR: Temp
BROWSERSVCSTARTUPTYPE: Disabled
CLTCTLRNAME: <empty>
CLTRESULTDIR: <empty>
CLTSTARTUPTYPE: 0
CLTSVCACCOUNT: <empty>
CLTSVCPASSWORD: <empty>
CLTWORKINGDIR: <empty>
COMMFABRICENCRYPTION: 0
COMMFABRICNETWORKLEVEL: 0
COMMFABRICPORT: 0
CONFIGURATIONFILE:
CTLRSTARTUPTYPE: 0
CTLRSVCACCOUNT: <empty>
CTLRSVCPASSWORD: <empty>
CTLRUSERS: <empty>
ENABLERANU: true
ENU: true
ERRORREPORTING: false
FEATURES: SQLENGINE, REPLICATION, FULLTEXT, RS, CONN, BC, SDK, BOL, SSMS, ADV_SSMS, LOCALDB
FILESTREAMLEVEL: 0
FILESTREAMSHARENAME: <empty>
FTSVCACCOUNT: NT Service\MSSQLFDLauncher$SQLEXPRESS
FTSVCPASSWORD: <empty>
HELP: false
IACCEPTSQLSERVERLICENSETERMS: true
INDICATEPROGRESS: false
INSTALLSHAREDDIR: C:\Program Files\Microsoft SQL Server\
INSTALLSHAREDWOWDIR: C:\Program Files (x86)\Microsoft SQL Server\
INSTALLSQLDATADIR: <empty>
INSTANCEDIR: C:\Program Files\Microsoft SQL Server\
INSTANCEID: SQLEXPRESS
INSTANCENAME: SQLEXPRESS
ISSVCACCOUNT: NT AUTHORITY\Network Service
ISSVCPASSWORD: <empty>
ISSVCSTARTUPTYPE: Automatic
MATRIXCMBRICKCOMMPORT: 0
MATRIXCMSERVERNAME: <empty>
MATRIXNAME: <empty>
NPENABLED: 0
PID: *****
QUIET: false
QUIETSIMPLE: false
ROLE: AllFeatures_WithDefaults
RSINSTALLMODE: DefaultNativeMode
RSSHPINSTALLMODE: DefaultSharePointMode
RSSVCACCOUNT: NT Service\ReportServer$SQLEXPRESS
RSSVCPASSWORD: <empty>
RSSVCSTARTUPTYPE: Automatic
SAPWD: <empty>
SECURITYMODE: <empty>
SQLBACKUPDIR: <empty>
SQLCOLLATION: Latin1_General_CI_AS
SQLSVCACCOUNT: NT Service\MSSQL$SQLEXPRESS
SQLSVCPASSWORD: *****
SQLSVCSTARTUPTYPE: Automatic
SQLSYSADMINACCOUNTS: DIOMEDES\Daniele
SQLTEMPDBDIR: <empty>
SQLTEMPDBLOGDIR: <empty>
SQLUSERDBDIR: <empty>
SQLUSERDBLOGDIR: <empty>
SQMREPORTING: false
TCPENABLED: 0
UIMODE: AutoAdvance
UpdateEnabled: true
UpdateSource: MU
USEMICROSOFTUPDATE: false
X86: false
Configuration file: C:\Program Files\Microsoft SQL Server\120\Setup Bootstrap\Log\20140403_183057\ConfigurationFile.ini
Detailed results:
Feature: Management Tools - Complete
Status: Passed
Feature: Client Tools Connectivity
Status: Passed
Feature: Client Tools SDK
Status: Passed
Feature: Client Tools Backwards Compatibility
Status: Passed
Feature: Management Tools - Basic
Status: Passed
Feature: Reporting Services - Native
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Component name: SQL Server Database Engine Services Instance Features
Component error code: 0x851A0019
Error description: Could not find the Database Engine startup handle.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=12.0.2000.8&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4025&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4025
Feature: Database Engine Services
Status: Failed: see logs for details
Reason for failure: An error occurred during the setup process of the feature.
Next Step: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Component name: SQL Server Database Engine Services Instance Features
Component error code: 0x851A0019
Error description: Could not find the Database Engine startup handle.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=12.0.2000.8&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4025&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4025
Feature: Full-Text and Semantic Extractions for Search
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Component name: SQL Server Database Engine Services Instance Features
Component error code: 0x851A0019
Error description: Could not find the Database Engine startup handle.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=12.0.2000.8&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4025&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4025
Feature: SQL Server Replication
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Component name: SQL Server Database Engine Services Instance Features
Component error code: 0x851A0019
Error description: Could not find the Database Engine startup handle.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=12.0.2000.8&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4025&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4025
Feature: SQL Browser
Status: Passed
Feature: Documentation Components
Status: Passed
Feature: SQL Writer
Status: Passed
Feature: LocalDB
Status: Passed
Feature: Setup Support Files
Status: Passed
Rules with failures:
Global rules:
Scenario specific rules:
Rules report file: C:\Program Files\Microsoft SQL Server\120\Setup Bootstrap\Log\20140403_183057\SystemConfigurationCheck_Report.htmThank you, it worked! I suppose that it was really your nr.3 which made the difference. I changed NT Service\MSSQL$SQLEXPRESS to NT AUTHORITY\System for the Data service. I'll then change it again as suggested (any suggestion about a "standard"
account to be used here?), even if this is a development workstation using SQL Server Express only as a local database for debugging, so security is not really a big concern.
Thanks for the feedback.Ya I know No3 was real step but just added more info so as to rule out any other possibility.
No not as such, you wont believe,quite few pf my clients I have worked for keep it with local system and they have not complained yet ,they are afraid to change account as few of them faced issue SQL Server not coming online due to logon failure( after changing
startup account to some domain a and that was happening due to some AD policy.But if you have nay plans to move Critical database in production which would be act as Database to some Internet facing application please follow my suggestion
of running SQL Server with Least privileged domain account.
Please mark this reply as the answer or vote as helpful, as appropriate, to make it useful for other readers -
Problem with Datasource for SQL Server Express
I have set up a development environment to develop some processes for the HCSO client and have a question. I have a turnkey install on my laptop with MYSQL. The liveCycle databases are in MYSQL. I have also installed SQL Server Express on this machine and created a table to query that will control workflow. I added a datasource configuration in the adobe-ds.xml configuration file. That configuration is:
<local-tx-datasource>
<jndi-name>HCSO</jndi-name>
<connection-url>jdbc:sqlserver://localhost:1433;DatabaseName=DBName</connection-url>
<driver-class>com.microsoft.sqlserver.jdbc.SQLServerDriver</driver-class>
<user-name>username</user-name>
<password>password</password>
<min-pool-size>1</min-pool-size>
<max-pool-size>30</max-pool-size>
<blocking-timeout-millis>60000</blocking-timeout-millis>
<autoReconnect>true</autoReconnect>
<idle-timeout-minutes>15</idle-timeout-minutes>
<prepared-statement-cache-size>100</prepared-statement-cache-size>
<transaction-isolation>TRANSACTION_READ_COMMITTED</transaction-isolation>
<new-connection-sql>Select id from HCSOUser.eric</new-connection-sql>
<check-valid-connection-sql>Select id from HCSOUser.eric</check-valid-connection-sql>
<metadata>
<type-mapping>MS SQLSERVER2000</type-mapping>
</metadata>
</local-tx-datasource>
In SQL Server, I created a user and a schema with the same name in a database. I created a simple table called "eric" with one column called "id". The user was given the appropriate default schema and given full permissions on the database and table.
In workbench, I added a JDBC query single row activity. I have configured the datasource as java:/HCSO and also tried java:HCSO. I then entered the query as "Select id from HCSOUser.eric" and hit test. Nothing appears in the results area. I see the following in the server.log:
2009-09-24 14:44:26,437 ERROR [org.jboss.ejb.plugins.LogInterceptor] RuntimeException in method: public abstract java.lang.Object com.adobe.idp.dsc.transaction.impl.ejb.adapter.EjbTransactionBMTAdapterLocal.doBMT(com.ad obe.idp.dsc.transaction.TransactionCallback) throws com.adobe.idp.dsc.DSCException:
java.lang.RuntimeException: A result set was generated for update.
at com.adobe.idp.dsc.jdbc.JDBCService.testExecute(JDBCService.java:616)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:592)
at com.adobe.idp.dsc.component.impl.DefaultPOJOInvokerImpl.invoke(DefaultPOJOInvokerImpl.jav a:118)
at com.adobe.idp.dsc.interceptor.impl.InvocationInterceptor.intercept(InvocationInterceptor. java:140)
at com.adobe.idp.dsc.interceptor.impl.RequestInterceptorChainImpl.proceed(RequestInterceptor ChainImpl.java:60)
at com.adobe.idp.dsc.transaction.interceptor.TransactionInterceptor$1.doInTransaction(Transa ctionInterceptor.java:74)
at com.adobe.idp.dsc.transaction.impl.ejb.adapter.EjbTransactionBMTAdapterBean.doBMT(EjbTran sactionBMTAdapterBean.java:197)
at sun.reflect.GeneratedMethodAccessor573.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:592)
at org.jboss.invocation.Invocation.performCall(Invocation.java:345)
at org.jboss.ejb.StatelessSessionContainer$ContainerInterceptor.invoke(StatelessSessionConta iner.java:214)
at org.jboss.resource.connectionmanager.CachedConnectionInterceptor.invoke(CachedConnectionI nterceptor.java:149)
at org.jboss.webservice.server.ServiceEndpointInterceptor.invoke(ServiceEndpointInterceptor. java:54)
at org.jboss.ejb.plugins.CallValidationInterceptor.invoke(CallValidationInterceptor.java:48)
at org.jboss.ejb.plugins.AbstractTxInterceptor.invokeNext(AbstractTxInterceptor.java:106)
at org.jboss.ejb.plugins.AbstractTxInterceptorBMT.invokeNext(AbstractTxInterceptorBMT.java:1 58)
at org.jboss.ejb.plugins.TxInterceptorBMT.invoke(TxInterceptorBMT.java:62)
at org.jboss.ejb.plugins.StatelessSessionInstanceInterceptor.invoke(StatelessSessionInstance Interceptor.java:154)
at org.jboss.ejb.plugins.SecurityInterceptor.invoke(SecurityInterceptor.java:153)
at org.jboss.ejb.plugins.LogInterceptor.invoke(LogInterceptor.java:192)
at org.jboss.ejb.plugins.ProxyFactoryFinderInterceptor.invoke(ProxyFactoryFinderInterceptor. java:122)
at org.jboss.ejb.SessionContainer.internalInvoke(SessionContainer.java:624)
at org.jboss.ejb.Container.invoke(Container.java:873)
at org.jboss.ejb.plugins.local.BaseLocalProxyFactory.invoke(BaseLocalProxyFactory.java:415)
at org.jboss.ejb.plugins.local.StatelessSessionProxy.invoke(StatelessSessionProxy.java:88)
at $Proxy270.doBMT(Unknown Source)
at com.adobe.idp.dsc.transaction.impl.ejb.EjbTransactionProvider.execute(EjbTransactionProvi der.java:95)
at com.adobe.idp.dsc.transaction.interceptor.TransactionInterceptor.intercept(TransactionInt erceptor.java:72)
at com.adobe.idp.dsc.interceptor.impl.RequestInterceptorChainImpl.proceed(RequestInterceptor ChainImpl.java:60)
at com.adobe.idp.dsc.interceptor.impl.InvocationStrategyInterceptor.intercept(InvocationStra tegyInterceptor.java:55)
at com.adobe.idp.dsc.interceptor.impl.RequestInterceptorChainImpl.proceed(RequestInterceptor ChainImpl.java:60)
at com.adobe.idp.dsc.interceptor.impl.InvalidStateInterceptor.intercept(InvalidStateIntercep tor.java:37)
at com.adobe.idp.dsc.interceptor.impl.RequestInterceptorChainImpl.proceed(RequestInterceptor ChainImpl.java:60)
at com.adobe.idp.dsc.interceptor.impl.AuthorizationInterceptor.intercept(AuthorizationInterc eptor.java:132)
at com.adobe.idp.dsc.interceptor.impl.RequestInterceptorChainImpl.proceed(RequestInterceptor ChainImpl.java:60)
at com.adobe.idp.dsc.interceptor.impl.JMXInterceptor.intercept(JMXInterceptor.java:48)
at com.adobe.idp.dsc.interceptor.impl.RequestInterceptorChainImpl.proceed(RequestInterceptor ChainImpl.java:60)
at com.adobe.idp.dsc.engine.impl.ServiceEngineImpl.invoke(ServiceEngineImpl.java:115)
at com.adobe.idp.dsc.routing.Router.routeRequest(Router.java:118)
at com.adobe.idp.dsc.provider.impl.base.AbstractMessageReceiver.invoke(AbstractMessageReceiv er.java:315)
at com.adobe.idp.dsc.provider.impl.soap.axis.sdk.SoapSdkEndpoint.invokeCall(SoapSdkEndpoint. java:138)
at com.adobe.idp.dsc.provider.impl.soap.axis.sdk.SoapSdkEndpoint.invoke(SoapSdkEndpoint.java :81)
at sun.reflect.GeneratedMethodAccessor710.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:592)
at org.apache.axis.providers.java.RPCProvider.invokeMethod(RPCProvider.java:397)
at org.apache.axis.providers.java.RPCProvider.processMessage(RPCProvider.java:186)
at org.apache.axis.providers.java.JavaProvider.invoke(JavaProvider.java:323)
at org.apache.axis.strategies.InvocationStrategy.visit(InvocationStrategy.java:32)
at org.apache.axis.SimpleChain.doVisiting(SimpleChain.java:118)
at org.apache.axis.SimpleChain.invoke(SimpleChain.java:83)
at org.apache.axis.handlers.soap.SOAPService.invoke(SOAPService.java:454)
at org.apache.axis.server.AxisServer.invoke(AxisServer.java:281)
at org.apache.axis.transport.http.AxisServlet.doPost(AxisServlet.java:699)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:717)
at org.apache.axis.transport.http.AxisServletBase.service(AxisServletBase.java:327)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:810)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.j ava:252)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:173)
at com.adobe.idp.dsc.provider.impl.soap.axis.InvocationFilter.doFilter(InvocationFilter.java :43)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.j ava:202)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:173)
at org.jboss.web.tomcat.filters.ReplyHeaderFilter.doFilter(ReplyHeaderFilter.java:81)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.j ava:202)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:173)
at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:213)
at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:178)
at org.jboss.web.tomcat.security.CustomPrincipalValve.invoke(CustomPrincipalValve.java:39)
at org.jboss.web.tomcat.security.SecurityAssociationValve.invoke(SecurityAssociationValve.ja va:159)
at org.jboss.web.tomcat.security.JaccContextValve.invoke(JaccContextValve.java:59)
at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:126)
at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:105)
at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:107)
at org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:148)
at org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:856)
at org.apache.coyote.http11.Http11Protocol$Http11ConnectionHandler.processConnection(Http11P rotocol.java:744)
at org.apache.tomcat.util.net.PoolTcpEndpoint.processSocket(PoolTcpEndpoint.java:527)
at org.apache.tomcat.util.net.MasterSlaveWorkerThread.run(MasterSlaveWorkerThread.java:112)
at java.lang.Thread.run(Thread.java:595)
Caused by: com.microsoft.sqlserver.jdbc.SQLServerException: A result set was generated for update.
at com.microsoft.sqlserver.jdbc.SQLServerException.makeFromDriverError(Unknown Source)
at com.microsoft.sqlserver.jdbc.SQLServerStatement.doExecuteStatement(Unknown Source)
at com.microsoft.sqlserver.jdbc.SQLServerStatement$StatementExecutionRequest.executeStatemen t(Unknown Source)
at com.microsoft.sqlserver.jdbc.CancelableRequest.execute(Unknown Source)
at com.microsoft.sqlserver.jdbc.SQLServerConnection.executeRequest(Unknown Source)
at com.microsoft.sqlserver.jdbc.SQLServerStatement.executeUpdate(Unknown Source)
at org.jboss.resource.adapter.jdbc.WrappedStatement.executeUpdate(WrappedStatement.java:161)
at com.adobe.idp.dsc.jdbc.helper.SqlHelper.executeTestUpdate(SqlHelper.java:117)
at com.adobe.idp.dsc.jdbc.JDBCService.testExecute(JDBCService.java:610)
... 82 moreThanks fot the tip, but now I got a different message in the "Test" results of "Query Single Row":
Exception: Could not create connection; - nested throwable: (com.microsoft.sqlserver.jdbc.SQLServerException: The TCP/IP connection to the host has failed. java.net.ConnectException: Connection refused: connect); - nested throwable: (org.jboss.resource.JBossResourceException: Could not create connection; - nested throwable: (com.microsoft.sqlserver.jdbc.SQLServerException: The TCP/IP connection to the host has failed. java.net.ConnectException: Connection refused: connect))
My datasource xml is like this:
<?xml version="1.0" encoding="UTF-8"?>
<datasources>
<local-tx-datasource>
<jndi-name>MSSQL</jndi-name>
<connection-url>jdbc:sqlserver://localhost:1433;DatabaseName=ADOBE</connection-url>
<use-java-context>false</use-java-context>
<driver-class>com.microsoft.sqlserver.jdbc.SQLServerDriver</driver-class>
<user-name>sa</user-name>
<password>adobe</password>
<min-pool-size>10</min-pool-size>
<max-pool-size>50</max-pool-size>
<blocking-timeout-millis>60000</blocking-timeout-millis>
<idle-timeout-minutes>15</idle-timeout-minutes>
<prepared-statement-cache-size>100</prepared-statement-cache-size>
<transaction-isolation>TRANSACTION_READ_COMMITTED</transaction-isolation>
<check-valid-connection-sql>SELECT 1 FROM sysobjects</check-valid-connection-sql>
<metadata>
<type-mapping>MS SQLSERVER2005</type-mapping>
</metadata>
</local-tx-datasource>
</datasources>
Where is the problem and how to fix it?
Thank you. -
SQL Server Express 2008 instance fails to start
I've installed SQL Server Express with a named instance 'SQLSERVER2'. I was able to connect to it and reference it in the management studio. There was a problem though with Visual Studio 9 when running an ASP.NET web application that required connecting to the same instance. So, I went into the configuration manager to change the security level of the instance from network to local service. The change went through but could not restart the instance. That is what has created my next round of problems. I can't go in and change it back to network because the instance is permanently stopped. I cannot start it with the services manager. How can I fix this?
Here is the connection log:
2009-12-21 11:36:32.20 Server Microsoft SQL Server 2008 (RTM) - 10.0.1600.22 (Intel X86)
Jul 9 2008 14:43:34
Copyright (c) 1988-2008 Microsoft Corporation
Express Edition with Advanced Services on Windows NT 5.1 <X86> (Build 2600: Service Pack 3)
2009-12-21 11:36:32.50 Server (c) 2005 Microsoft Corporation.
2009-12-21 11:36:32.51 Server All rights reserved.
2009-12-21 11:36:32.51 Server Server process ID is 21856.
2009-12-21 11:36:32.51 Server Authentication mode is MIXED.
2009-12-21 11:36:32.53 Server Logging SQL Server messages in file 'c:\Program Files\Microsoft SQL Server\MSSQL10.SQLEXPRESS2\MSSQL\Log\ERRORLOG'.
2009-12-21 11:36:32.89 Server This instance of SQL Server last reported using a process ID of 3216 at 12/18/2009 6:06:56 PM (local) 12/19/2009 2:06:56 AM (UTC). This is an informational message only; no user action is required.
2009-12-21 11:36:32.89 Server Registry startup parameters:
-d c:\Program Files\Microsoft SQL Server\MSSQL10.SQLEXPRESS2\MSSQL\DATA\master.mdf
-e c:\Program Files\Microsoft SQL Server\MSSQL10.SQLEXPRESS2\MSSQL\Log\ERRORLOG
-l c:\Program Files\Microsoft SQL Server\MSSQL10.SQLEXPRESS2\MSSQL\DATA\mastlog.ldf
2009-12-21 11:36:33.26 Server SQL Server is starting at normal priority base (=7). This is an informational message only. No user action is required.
2009-12-21 11:36:33.29 Server Detected 2 CPUs. This is an informational message; no user action is required.
2009-12-21 11:36:35.15 Server Using dynamic lock allocation. Initial allocation of 2500 Lock blocks and 5000 Lock Owner blocks per node. This is an informational message only. No user action is required.
2009-12-21 11:36:36.64 Server Node configuration: node 0: CPU mask: 0x00000003 Active CPU mask: 0x00000003. This message provides a description of the NUMA configuration for this computer. This is an informational message only. No user action is required.
2009-12-21 11:36:37.42 spid6s Starting up database 'master'.
2009-12-21 11:36:38.98 spid6s FILESTREAM: effective level = 0, configured level = 0, file system access share name = 'SQLEXPRESS2'.
2009-12-21 11:36:39.40 spid6s SQL Trace ID 1 was started by login "sa".
2009-12-21 11:36:39.50 spid6s Starting up database 'mssqlsystemresource'.
2009-12-21 11:36:39.59 spid6s The resource database build version is 10.00.1600. This is an informational message only. No user action is required.
2009-12-21 11:36:40.14 spid10s Starting up database 'model'.
2009-12-21 11:36:40.17 spid6s Server name is 'USER-F19E13BA9B\SQLEXPRESS2'. This is an informational message only. No user action is required.
2009-12-21 11:36:40.56 spid6s Informational: No full-text supported languages found.
2009-12-21 11:36:40.57 spid6s Starting up database 'msdb'.
2009-12-21 11:36:40.60 Server Error: 17190, Severity: 16, State: 1.
2009-12-21 11:36:40.60 Server FallBack certificate initialization failed with error code: 1.
2009-12-21 11:36:40.70 Server Unable to initialize SSL encryption because a valid certificate could not be found, and it is not possible to create a self-signed certificate.
2009-12-21 11:36:40.71 Server Error: 17182, Severity: 16, State: 1.
2009-12-21 11:36:40.71 Server TDSSNIClient initialization failed with error 0x80092004, status code 0x80. Reason: Unable to initialize SSL support. Cannot find object or property.
2009-12-21 11:36:40.71 Server Error: 17182, Severity: 16, State: 1.
2009-12-21 11:36:40.71 Server TDSSNIClient initialization failed with error 0x80092004, status code 0x1. Reason: Initialization failed with an infrastructure error. Check for previous errors. Cannot find object or property.
2009-12-21 11:36:40.71 Server Error: 17826, Severity: 18, State: 3.
2009-12-21 11:36:40.71 Server Could not start the network library because of an internal error in the network library. To determine the cause, review the errors immediately preceding this one in the error log.
2009-12-21 11:36:40.71 Server Error: 17120, Severity: 16, State: 1.
2009-12-21 11:36:40.71 Server SQL Server could not spawn FRunCM thread. Check the SQL Server error log and the Windows event logs for information about possible related problems.Hi,
This problem can occur if the new Service Account does not have a profile on the machine. To resolve the issue connect to the SQL Server machine using the New Service account. This will create a profile for the user.
SQL Server creates a self-generated certificate if a certificate is not explicitly specified and/or is not installed. This information is saved in the profile for the SQL Server service account. If the profile has not been created then SQL cannot register the self-generated certificate.
If there are any more questions, please let me know.
Thanks.
***Xiao Min Tan***Microsoft Online Community***
What 'New Service account' are you referring to? SQL Server Express resides on my PC where I'm logged on as administrator. I don't know what you mean by connecting to the server. I only know about connecting to the database instance which is the root of the this problem because it can't be started. Sorry for my confusion... -
SQL Server Express 2008 no longer accepting remote connections
Last night our SQL Server Express 2008 (running on Windows 2003 server) stopped accepting remote connections.
1. We restarted the SQL Server -- no resolution.
2. We rebooted the host Windows 2003 server - no resolution.
3. telnet localhost 1433: says Could not open connection to the host on port 1433... connection failed.
4. netstat -an indicates that the server is not listening on port 1433
5. SQL Server Network Configuration -> Protocols for SQLEXPRESS2008A -> (properties) -> TCP-IP (enabled), Listen All (yes)
6. SQL Native Client 10.0 Configuration -> Client Protocols -> (properties) TCP-IP (enabled), Default port (1433)
Fragment from the server error log:
2014-03-26 08:50:41.09 Server A self-generated certificate was successfully loaded for encryption.
2014-03-26 08:50:41.11 Server Server is listening on [ 'any' <ipv4> 1026].
2014-03-26 08:50:41.11 Server Server local connection provider is ready to accept connection on [ \\.\pipe\SQLLocal\SQLEXPRESS2008A ].
2014-03-26 08:50:41.11 Server Server named pipe provider is ready to accept connection on [ \\.\pipe\MSSQL$SQLEXPRESS2008A\sql\query ].
2014-03-26 08:50:41.11 Server Dedicated administrator connection support was not started because it is disabled on this edition of SQL Server. If you want to use a dedicated administrator connection, restart SQL Server using the
trace flag 7806. This is an informational message only. No user action is required.
2014-03-26 08:50:41.11 Server The SQL Server Network Interface library could not register the Service Principal Name (SPN) for the SQL Server service. Error: 0x54b, state: 3. Failure to register an SPN may cause integrated authentication
to fall back to NTLM instead of Kerberos. This is an informational message. Further action is only required if Kerberos authentication is required by authentication policies.
2014-03-26 08:50:41.11 Server SQL Server is now ready for client connections. This is an informational message; no user action is required.
2014-03-26 08:50:41.29 spid10s Clearing tempdb database.
2014-03-26 08:50:41.89 spid10s Starting up database 'tempdb'.
2014-03-26 08:50:42.09 spid13s The Service Broker protocol transport is disabled or not configured.
2014-03-26 08:50:42.09 spid13s The Database Mirroring protocol transport is disabled or not configured.
2014-03-26 08:50:42.14 spid13s Service Broker manager has started.
2014-03-26 08:50:42.14 spid7s Recovery is complete. This is an informational message only. No user action is required.
2014-03-26 08:50:53.48 spid51 Attempting to load library 'xpstar.dll' into memory. This is an informational message only. No user action is required.
2014-03-26 08:50:53.48 spid51 Using 'xpstar.dll' version '2007.100.1600' to execute extended stored procedure 'xp_enumerrorlogs'. This is an informational message only; no user action is required.
2014-03-26 08:51:35.68 spid54 Starting up database 'Web TimeSheet2'.
2014-03-26 08:51:38.47 spid54 Recovery is writing a checkpoint in database 'Web TimeSheet2' (6). This is an informational message only. No user action is required.
Note: the lines referring to xpstar.dll is new after this porblem. Previous logs do not have this,Any help will be appreciated.Hi,
>>Server is listening on [ 'any' <ipv4> 1026].
Your sql server is not listening on default port 1433 but on 1026.When you connect to instance like hostname\instancename you should specify post no also.
like hostname\instancename ,1026
Can you try this.Makes sure TCP/IP and named pipes protocol is enabled
Please mark this reply as the answer or vote as helpful, as appropriate, to make it useful for other readers -
Can't install sql server express
HElp!!!
I'm trying to install any recent free sql server.. to practice with vs2012 and asp.net mvc.. and the install keeps failing. THis is my personal desktop running 64bit Windows 7. sql server express "said" it was installing but sql
server doesn't show up under Start/all programs and SWL server management studio isn't under administrative tools. I tried sql server express but it said it wouldn't install on 64 bit -- something about WOW. Several sql server things are listed
in control panel and I'm trying to uninstall them to start over. Please point me to place to get sql server express with hopefully instructions to install. Buying a 32 bit computer is not an option at this time.
Thanks in advance,
Kayproblems: 1. no menu item for "new table" in sql server management studio (Right click on tables)
2. Can't attach northwind db and won't create it using script. missing stored procedure 'sp_dboption'
Hi,
Based on your description, firstly, we need to verify if there is no option of ‘New Table’ when right-clicking ‘Tables’ in the left panel of SQL Server Management Studio (SSMS), or you cannot create new table via the GUI in the right panel as follows.
They might be caused by incomplete installation, I recommend you to check if you have installed the SQL Server 2012 completely.
Secondly, are you trying to attach the NORTHWIND sample database with the sp_dboption in SSMS? If so, the sp_dboption has been deprecated in SQL Server 2012, it’s only supported in SQL Server 2008 or prior version, you can use
ALTER DATABASE NORTHWIND SET RECOVERY SIMPLE to replace the following lines in the
instnwnd.sql script, then execute it. I have done a test successfully in SQL Server 2012.
exec sp_dboption 'Northwind','trunc. log on chkpt.','true'
exec sp_dboption 'Northwind','select into/bulkcopy','true'
In addition, according to the message “visual studio 2013 does NOT recognize the server”, it seems that you encounter the connection issue between Visual Studio and SQL Server. If you get some error messages, you can post them for further analysis. Also, you
need to verify that the connection string (contains server name, login, password and so on) is correct when connecting to the SQL Server from Visual Studio.
Thanks
Lydia Zhang -
I have tried installing SQL Server 2008 multiple times on my machine, and I always receive this error about 3/4 of the way through: '' is not a valid login or you do not have permission.
I have tried installing both SQL Server Express 2008 with Tools and SQL Server Express 2008 with Advanced Services, and they both fail the same way. I am trying to do a new stand-alone installation.
I'm running Windows XP Home Edition SP3.
Looking into the error, some forums say I have to install it from THE Administrator account, and not an account with administrator permissions; it also cannot be in Safe Mode, because then the Windows Installer won't work. Unfortunately, I haven't been able to login to the Administrator account. I can go to the home login screen, do ctrl+alt+del twice, and attempt to login to the Administrator account, but I receive this error: Unable to Log You on because of an Account Restriction.
Other forums say that in the Server Configuration section, all you have to do is provide the username and a strong password from an administrative account on the computer, and it doesn't have to be THE Administrator. Well, I did that, but for some reason it doesn't recognize my username and password, it says something like "The credentials you provided for the SQL Server Agent are invalid". BUT THOSE ARE THE CORRECT CREDENTIALS FOR MY ADMINISTRATIVE USER! So I'm forced to use one of the accounts without a password, like NT AUTHORITY\SYSTEM. That's the only way I can get past this step.
Also, just FYI, on the next step, which is Database Engine Configuration, I am using Mixed Mode for the Security Mode. I AGAIN provide a password, and then add my current user (who IS an administrator on my machine!) to the SQL Server Administrators box.
But yet, it fails every single time.
This is pathetic and ridiculous. I must have tried to install this thing 15 times, that is not an exaggeration. I'm posting this on several other forums as well, maybe an MVP or Bill Gates himself can help me.
I have one of the log files from a failed installation. If someone would like to see it, I will post it.Papy Normand wrote:
Hello,
Please, could you have a look on the excellent answer of Mike Wachal you will find here :
http://forums.microsoft.com/MSDN/ShowPost.aspx?PostID=4160294&SiteID=1
Don't hesitate to post again for more help or explanations
Have a nice day
PS : if you are talking about the Sql Server Agent Service, it is disabled for Sql Server Express. It is enabled only for the Workgroup/Standard/Dev and Entreprise Editions
Sorry, but I've tried the suggestion in that link, and it hasn't helped me.
For anyone wonder, the link is talking about the problem in Server Configuration where I enter my Windows user account and password (which is in the Administrative group), but it says the credentials are invalid. The link suggests that you need to either enter your Windows account (which I did, and it wouldn't let me go to the next step), or to use one of the built in accounts (which I also tried, but it gave me the " '' is not a valid login" error during the installation).
Any other ideas?
I haven't had any answers from any other forums either, so I'll just post my log file in case anyone wants to look at this:
Overall summary:
Final result: SQL Server installation failed. To continue, investigate the reason for the failure, correct the problem, uninstall SQL Server, and then rerun SQL Server Setup.
Exit code (Decimal): -2068643839
Exit facility code: 1203
Exit error code: 1
Exit message: SQL Server installation failed. To continue, investigate the reason for the failure, correct the problem, uninstall SQL Server, and then rerun SQL Server Setup.
Start time: 2008-11-17 11:13:47
End time: 2008-11-17 12:17:25
Requested action: Install
Log with failure: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20081117_110917\Detail.txt
Exception help link: http%3a%2f%2fgo.microsoft.com%2ffwlink%3fLinkId%3d20476%26ProdName%3dMicrosoft%2bSQL%2bServer%26EvtSrc%3dsetup.rll%26EvtID%3d50000%26ProdVer%3d10.0.1600.22%26EvtType%3d0xBE029E38%400x12C2466D
Machine Properties:
Machine name: STEVEN
Machine processor count: 2
OS version: Windows XP
OS service pack: Service Pack 3
OS region: United States
OS language: English (United States)
OS architecture: x86
Process architecture: 32 Bit
OS clustered: No
Product features discovered:
Product Instance Instance ID Feature Language Edition Version Clustered
Package properties:
Description: SQL Server Database Services 2008
SQLProductFamilyCode: {628F8F38-600E-493D-9946-F4178F20A8A9}
ProductName: SQL2008
Type: RTM
Version: 10
SPLevel: 0
Installation location: D:\x86\setup\
Installation edition: DEVELOPER
User Input Settings:
ACTION: Install
ADDCURRENTUSERASSQLADMIN: False
AGTSVCACCOUNT: NT AUTHORITY\SYSTEM
AGTSVCPASSWORD: *****
AGTSVCSTARTUPTYPE: Manual
ASBACKUPDIR: C:\Program Files\Microsoft SQL Server\MSAS10.MSSQLSERVER\OLAP\Backup
ASCOLLATION: Latin1_General_CI_AS
ASCONFIGDIR: C:\Program Files\Microsoft SQL Server\MSAS10.MSSQLSERVER\OLAP\Config
ASDATADIR: C:\Program Files\Microsoft SQL Server\MSAS10.MSSQLSERVER\OLAP\Data
ASDOMAINGROUP: <empty>
ASLOGDIR: C:\Program Files\Microsoft SQL Server\MSAS10.MSSQLSERVER\OLAP\Log
ASPROVIDERMSOLAP: 1
ASSVCACCOUNT: NT AUTHORITY\SYSTEM
ASSVCPASSWORD: *****
ASSVCSTARTUPTYPE: Automatic
ASSYSADMINACCOUNTS: STEVEN\Steven
ASTEMPDIR: C:\Program Files\Microsoft SQL Server\MSAS10.MSSQLSERVER\OLAP\Temp
BROWSERSVCSTARTUPTYPE: Disabled
CONFIGURATIONFILE: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20081117_110917\ConfigurationFile.ini
ENABLERANU: False
ERRORREPORTING: False
FEATURES: SQLENGINE,REPLICATION,FULLTEXT,AS,RS,BIDS,CONN,IS,BC,SDK,BOL,SSMS,ADV_SSMS,SNAC_SDK,OCS
FILESTREAMLEVEL: 0
FILESTREAMSHARENAME: <empty>
FTSVCACCOUNT: NT AUTHORITY\LOCAL SERVICE
FTSVCPASSWORD: *****
HELP: False
INDICATEPROGRESS: False
INSTALLSHAREDDIR: C:\Program Files\Microsoft SQL Server\
INSTALLSHAREDWOWDIR: C:\Program Files\Microsoft SQL Server\
INSTALLSQLDATADIR: <empty>
INSTANCEDIR: C:\Program Files\Microsoft SQL Server\
INSTANCEID: MSSQLSERVER
INSTANCENAME: MSSQLSERVER
ISSVCACCOUNT: NT AUTHORITY\SYSTEM
ISSVCPASSWORD: *****
ISSVCSTARTUPTYPE: Automatic
MEDIASOURCE: D:\
NPENABLED: 0
PID: *****
QUIET: False
QUIETSIMPLE: False
RSINSTALLMODE: DefaultNativeMode
RSSVCACCOUNT: NT AUTHORITY\SYSTEM
RSSVCPASSWORD: *****
RSSVCSTARTUPTYPE: Automatic
SAPWD: *****
SECURITYMODE: SQL
SQLBACKUPDIR: <empty>
SQLCOLLATION: SQL_Latin1_General_CP1_CI_AS
SQLSVCACCOUNT: NT AUTHORITY\SYSTEM
SQLSVCPASSWORD: *****
SQLSVCSTARTUPTYPE: Automatic
SQLSYSADMINACCOUNTS: STEVEN\Steven
SQLTEMPDBDIR: <empty>
SQLTEMPDBLOGDIR: <empty>
SQLUSERDBDIR: <empty>
SQLUSERDBLOGDIR: <empty>
SQMREPORTING: False
TCPENABLED: 0
X86: False
Configuration file: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20081117_110917\ConfigurationFile.ini
Detailed results:
Feature: Database Engine Services
Status: Failed: see logs for details
MSI status: Passed
Configuration status: Failed: see details below
Configuration error code: 0x12C2466D
Configuration error description: '' is not a valid login or you do not have permission.
Configuration log: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20081117_110917\Detail.txt
Feature: SQL Client Connectivity SDK
Status: Passed
MSI status: Passed
Configuration status: Passed
Feature: SQL Server Replication
Status: Failed: see logs for details
MSI status: Passed
Configuration status: Failed: see details below
Configuration error code: 0x12C2466D
Configuration error description: '' is not a valid login or you do not have permission.
Configuration log: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20081117_110917\Detail.txt
Feature: Full-Text Search
Status: Failed: see logs for details
MSI status: Passed
Configuration status: Failed: see details below
Configuration error code: 0x12C2466D
Configuration error description: '' is not a valid login or you do not have permission.
Configuration log: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20081117_110917\Detail.txt
Feature: Analysis Services
Status: Passed
MSI status: Passed
Configuration status: Passed
Feature: Reporting Services
Status: Failed: see logs for details
MSI status: Passed
Configuration status: Failed: see details below
Configuration error code: 0x12C2466D
Configuration error description: '' is not a valid login or you do not have permission.
Configuration log: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20081117_110917\Detail.txt
Feature: Integration Services
Status: Passed
MSI status: Passed
Configuration status: Passed
Feature: Client Tools Connectivity
Status: Passed
MSI status: Passed
Configuration status: Passed
Feature: Management Tools - Complete
Status: Passed
MSI status: Passed
Configuration status: Passed
Feature: Management Tools - Basic
Status: Passed
MSI status: Passed
Configuration status: Passed
Feature: Client Tools SDK
Status: Passed
MSI status: Passed
Configuration status: Passed
Feature: Client Tools Backwards Compatibility
Status: Passed
MSI status: Passed
Configuration status: Passed
Feature: Business Intelligence Development Studio
Status: Passed
MSI status: Passed
Configuration status: Passed
Feature: SQL Server Books Online
Status: Passed
MSI status: Passed
Configuration status: Passed
Feature: Microsoft Sync Framework
Status: Passed
MSI status: Passed
Configuration status: Passed
Rules with failures:
Global rules:
Scenario specific rules:
Rules report file: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20081117_110917\SystemConfigurationCheck_Report.htm -
SQL Server Express intermittent installation issue
Have been seeing this error for several months trying to duplicate and troubleshoot. SQL Server 2008 R2 SP2 Express being installed on Windows 7 (x86 or x64) Professional, various processors, various execution environments (VM and non-VM). Yesterday duplicated
on x86 Win7 Pro VM clean install (installed Win7 Pro, loaded all updates except .NET 4.5, and installed my application). App installer copies .NET 4, Visual Studio 2010 C++ run-time, and then SQL Server 2008 R2 SP2. Below is portion of detail.txt from
setup failure log:
2014-07-12 18:22:17 Slp: ----------------------------------------------------------------------
2014-07-12 18:22:17 Slp: Running Action: SqlEngineDBStartConfigAction_install_configrc_Cpu32
2014-07-12 18:22:17 Slp: Action Data:
2014-07-12 18:22:17 Slp: Feature = SQL_Engine_Core_Inst_sql_engine_core_inst_Cpu32
2014-07-12 18:22:17 Slp: Scenario = install
2014-07-12 18:22:17 Slp: Timing = ConfigRC
2014-07-12 18:22:17 Slp: ConfigObjectType = Microsoft.SqlServer.Configuration.SqlEngine.SqlEngineDBStartConfig
2014-07-12 18:22:17 Slp: FeatureName = SQL_Engine_Core_Inst
2014-07-12 18:22:17 Slp: FeatureCpuType = Cpu32
2014-07-12 18:22:17 Slp: FeaturePackageId = sql_engine_core_inst
2014-07-12 18:22:17 Slp: SlipstreamInstall = 1
2014-07-12 18:22:17 SQLEngine: --SqlEngineDBStartConfig: Install: SqlEngineDBStartConfig Configuration
2014-07-12 18:22:17 SQLEngine: : Action Scenario: Install, Feature Scenario: Install, Resolved Scenario Install
2014-07-12 18:22:17 Slp: Sco: Attempting to get network service account name
2014-07-12 18:22:17 Slp: Sco: Attempting to get NT account from sid S-1-5-20
2014-07-12 18:22:17 Slp: Sco: Attempting to get account from sid S-1-5-20
2014-07-12 18:22:17 Slp: Sco: Attempting to get network service account name
2014-07-12 18:22:17 Slp: Sco: Attempting to get NT account from sid S-1-5-20
2014-07-12 18:22:17 Slp: Sco: Attempting to get account from sid S-1-5-20
2014-07-12 18:22:17 Slp: Sco: Attempting to get account sid for user account NT AUTHORITY\NETWORK SERVICE
2014-07-12 18:22:17 Slp: Sco: Attempting to get sid for user account NT AUTHORITY\NETWORK SERVICE
2014-07-12 18:22:17 Slp: Sco: GetSidForAccount normalized accountName NT AUTHORITY\NETWORK SERVICE parameter to NT AUTHORITY\NETWORK SERVICE
2014-07-12 18:22:17 SQLEngine: --RegistryProperties: container.ActiveNode =
2014-07-12 18:22:17 SQLEngine: --RegistryProperties: container.IsActiveNodeUpgraded = False
2014-07-12 18:22:17 SQLEngine: --RegistryProperties: container.Version =
2014-07-12 18:22:17 SQLEngine: --RegistryProperties: container.IsDefaultInstance = False
2014-07-12 18:22:17 SQLEngine: --RegistryProperties: container.InstanceId = MSSQL10_50.SQLEXPRESS
2014-07-12 18:22:17 SQLEngine: --RegistryProperties: container.ReferenceInstanceId = MSSQL10_50.SQLEXPRESS
2014-07-12 18:22:17 SQLEngine: --RegistryProperties: container.InstanceName = SQLEXPRESS
2014-07-12 18:22:17 SQLEngine: --RegistryProperties: container.SqlServerServiceName = MSSQL$SQLEXPRESS
2014-07-12 18:22:17 SQLEngine: --ProductProperties: Retrieving product properties from local node.
2014-07-12 18:22:17 Slp: Sco: Attempting to create base registry key HKEY_LOCAL_MACHINE, machine
2014-07-12 18:22:17 Slp: Sco: Attempting to open registry subkey SOFTWARE\Microsoft\Microsoft SQL Server\MSSQL10_50.SQLEXPRESS\Setup
2014-07-12 18:22:17 Slp: Sco: Attempting to get registry value ProductCode
2014-07-12 18:22:17 Slp: Sco: Attempting to create base registry key HKEY_LOCAL_MACHINE, machine
2014-07-12 18:22:17 Slp: Sco: Attempting to open registry subkey SOFTWARE\Microsoft\Microsoft SQL Server\MSSQL10_50.SQLEXPRESS\Setup
2014-07-12 18:22:17 Slp: Sco: Attempting to get registry value Language
2014-07-12 18:22:17 SQLEngine: --GroupProperties: Loading group properties from local machine.
2014-07-12 18:22:17 Slp: Sco: Attempting to create base registry key HKEY_LOCAL_MACHINE, machine
2014-07-12 18:22:17 Slp: Sco: Attempting to open registry subkey SOFTWARE\Microsoft\Microsoft SQL Server\MSSQL10_50.SQLEXPRESS\Setup
2014-07-12 18:22:17 Slp: Sco: Attempting to get registry value SQLGroup
2014-07-12 18:22:17 Slp: Sco: Attempting to get account from sid S-1-5-21-3076291671-3154185214-3698330068-1005
2014-07-12 18:22:17 Slp: Sco: Attempting to create base registry key HKEY_LOCAL_MACHINE, machine
2014-07-12 18:22:17 Slp: Sco: Attempting to open registry subkey SOFTWARE\Microsoft\Microsoft SQL Server\MSSQL10_50.SQLEXPRESS\Setup
2014-07-12 18:22:17 Slp: Sco: Attempting to get registry value SQLPath
2014-07-12 18:22:17 SQLEngine: --EffectiveProperties: Dumping Effective Properties for new instance.
2014-07-12 18:22:17 SQLEngine: --EffectiveProperties: InstanceId = MSSQL10_50.SQLEXPRESS
2014-07-12 18:22:17 SQLEngine: --EffectiveProperties: InstanceName = SQLEXPRESS
2014-07-12 18:22:17 SQLEngine: --EffectiveProperties: IsDefaultInstance = False
2014-07-12 18:22:17 SQLEngine: --EffectiveProperties: SqlServerServiceName = MSSQL$SQLEXPRESS
2014-07-12 18:22:17 SQLEngine: --EffectiveProperties: IsExpressSku = True
2014-07-12 18:22:17 SQLEngine: --EffectiveProperties: IsWorkgroupSku = False
2014-07-12 18:22:17 SQLEngine: --InstallProperties: Dumping Install Properties
2014-07-12 18:22:17 SQLEngine: --InstallProperties: EnableRanu = True
2014-07-12 18:22:17 SQLEngine: --InstallProperties: SecurityMode =
2014-07-12 18:22:17 SQLEngine: --InstallProperties: LoginMode = 1
2014-07-12 18:22:17 SQLEngine: --InstallProperties: SqlCollation = SQL_Latin1_General_CP1_CI_AS
2014-07-12 18:22:17 SQLEngine: --InstallProperties: SqlAdminAcounts =
2014-07-12 18:22:17 SQLEngine: --InstallProperties: SqlServiceStartupType = Automatic
2014-07-12 18:22:17 SQLEngine: --InstallProperties: SqlAccount = NT AUTHORITY\NETWORK SERVICE
2014-07-12 18:22:17 SQLEngine: --InstallProperties: SqlDomainGroup =
2014-07-12 18:22:17 SQLEngine: --InstallProperties: AddCurrentUserAsSQLAdmin = True
2014-07-12 18:22:17 SQLEngine: --RegistryProperties: Dumping Registry Properties
2014-07-12 18:22:17 SQLEngine: --RegistryProperties: SqlServiceRelativeRegPath = System\CurrentControlSet\Services\MSSQL$SQLEXPRESS
2014-07-12 18:22:17 SQLEngine: --RegistryProperties: CompleteInstanceRegPathByName = SOFTWARE\Microsoft\Microsoft SQL Server\SQLEXPRESS
2014-07-12 18:22:17 SQLEngine: --RegistryProperties: CompleteInstanceRegPathById = SOFTWARE\Microsoft\Microsoft SQL Server\MSSQL10_50.SQLEXPRESS
2014-07-12 18:22:17 SQLEngine: --RegistryProperties: ReferenceInstanceRegPathById = SOFTWARE\Microsoft\Microsoft SQL Server\MSSQL10_50.SQLEXPRESS
2014-07-12 18:22:17 SQLEngine: --RegistryProperties: MSSQLServerInstanceRegPath = SOFTWARE\Microsoft\Microsoft SQL Server\MSSQL10_50.SQLEXPRESS\MSSQLServer
2014-07-12 18:22:17 SQLEngine: --RegistryProperties: ReferenceMSSQLServerInstanceRegPath = SOFTWARE\Microsoft\Microsoft SQL Server\MSSQL10_50.SQLEXPRESS\MSSQLServer
2014-07-12 18:22:17 SQLEngine: --RegistryProperties: SetupInstanceRegPath = SOFTWARE\Microsoft\Microsoft SQL Server\MSSQL10_50.SQLEXPRESS\Setup
2014-07-12 18:22:17 SQLEngine: --RegistryProperties: ReferenceSetupInstanceRegPath = SOFTWARE\Microsoft\Microsoft SQL Server\MSSQL10_50.SQLEXPRESS\Setup
2014-07-12 18:22:17 SQLEngine: --ProductProperties: Dumping Product Properties
2014-07-12 18:22:17 SQLEngine: --ProductProperties: ProductCode = b5153233-9aee-4cd4-9d2c-4faac870dbe2
2014-07-12 18:22:17 SQLEngine: --ProductProperties: LCID = 1033
2014-07-12 18:22:17 SQLEngine: --GroupProperties: Dumping Group Properties
2014-07-12 18:22:17 SQLEngine: --GroupProperties: SqlEngineGroupSid = S-1-5-21-3076291671-3154185214-3698330068-1005
2014-07-12 18:22:17 SQLEngine: --GroupProperties: SqlEngineGroupNameFromSid = WIN-EAD5VG4PBDE\SQLServerMSSQLUser$WIN-EAD5VG4PBDE$SQLEXPRESS
2014-07-12 18:22:17 SQLEngine: --GroupProperties: SqlEngineGroupNameFromSidNoDomain = SQLServerMSSQLUser$WIN-EAD5VG4PBDE$SQLEXPRESS
2014-07-12 18:22:17 SQLEngine: --PublicBasedDirectoryProperties: Dumping Directory Propreties
2014-07-12 18:22:17 SQLEngine: --PublicBasedDirectoryProperties: DataRootDirectory = c:\Program Files\Microsoft SQL Server\MSSQL10_50.SQLEXPRESS\MSSQL
2014-07-12 18:22:17 SQLEngine: --PublicBasedDirectoryProperties: SystemDataDirectory = c:\Program Files\Microsoft SQL Server\MSSQL10_50.SQLEXPRESS\MSSQL\DATA
2014-07-12 18:22:17 SQLEngine: --PublicBasedDirectoryProperties: InstallSqlInstanceDir = c:\Program Files\Microsoft SQL Server\MSSQL10_50.SQLEXPRESS\MSSQL
2014-07-12 18:22:17 SQLEngine: --PublicBasedDirectoryProperties: DefaultDataDirectory = c:\Program Files\Microsoft SQL Server\MSSQL10_50.SQLEXPRESS\MSSQL\DATA
2014-07-12 18:22:17 SQLEngine: --PublicBasedDirectoryProperties: DefaultLogDirectory = c:\Program Files\Microsoft SQL Server\MSSQL10_50.SQLEXPRESS\MSSQL\DATA
2014-07-12 18:22:17 SQLEngine: --PublicBasedDirectoryProperties: BackupDirectory = c:\Program Files\Microsoft SQL Server\MSSQL10_50.SQLEXPRESS\MSSQL\Backup
2014-07-12 18:22:17 SQLEngine: --PublicBasedDirectoryProperties: TempDbDirectory = c:\Program Files\Microsoft SQL Server\MSSQL10_50.SQLEXPRESS\MSSQL\DATA
2014-07-12 18:22:17 SQLEngine: --PublicBasedDirectoryProperties: TempDbLogDirectory = c:\Program Files\Microsoft SQL Server\MSSQL10_50.SQLEXPRESS\MSSQL\DATA
2014-07-12 18:22:17 SQLEngine: --PublicBasedDirectoryProperties: ErrorLogDirectory = c:\Program Files\Microsoft SQL Server\MSSQL10_50.SQLEXPRESS\MSSQL\Log
2014-07-12 18:22:17 SQLEngine: --PublicBasedDirectoryProperties: TemplateDataDirectory = c:\Program Files\Microsoft SQL Server\MSSQL10_50.SQLEXPRESS\MSSQL\Template Data
2014-07-12 18:22:17 SQLEngine: --PublicBasedDirectoryProperties: SqlInstanceBinnDir = c:\Program Files\Microsoft SQL Server\MSSQL10_50.SQLEXPRESS\MSSQL\Binn
2014-07-12 18:22:17 SQLEngine: --PublicBasedDirectoryProperties: SqlInstanceTemplatesDir = c:\Program Files\Microsoft SQL Server\MSSQL10_50.SQLEXPRESS\MSSQL\Binn\Templates
2014-07-12 18:22:17 SQLEngine: --PublicBasedDirectoryProperties: MasterDbPath =
2014-07-12 18:22:17 SQLEngine: --PublicBasedDirectoryProperties: MasterLogPath =
2014-07-12 18:22:17 SQLEngine: --SqlEngineDBStartConfig: ConfigRC : SqlEngineDBStartConfig Configuration
2014-07-12 18:22:18 Slp: Sco: Attempting to set directory full path
2014-07-12 18:22:18 Slp: Sco: Attempting to normalize directory path c:\Program Files\Microsoft SQL Server\MSSQL10_50.SQLEXPRESS\MSSQL\DATA
2014-07-12 18:22:18 Slp: Sco: Attempting to set directory full path
2014-07-12 18:22:18 Slp: Sco: Attempting to normalize directory path c:\Program Files\Microsoft SQL Server\MSSQL10_50.SQLEXPRESS\MSSQL\DATA
2014-07-12 18:22:18 Slp: Sco: Attempting to set directory full path
2014-07-12 18:22:18 Slp: Sco: Attempting to normalize directory path c:\Program Files\Microsoft SQL Server\MSSQL10_50.SQLEXPRESS\MSSQL\DATA
2014-07-12 18:22:18 SQLEngine: --SqlServerStartup: SQLEngine: Slipstream case: Enable traceflag -T902
2014-07-12 18:22:18 SQLEngine: : Checking Engine checkpoint 'StartEngineService'
2014-07-12 18:22:18 SQLEngine: --SqlServerServiceSCM: Starting SQL via SCM (-mSqlSetup -f -Q -qSQL_Latin1_General_CP1_CI_AS -T4022 -T4010 -T3659 -T3610 -T902 -dc:\Program Files\Microsoft SQL Server\MSSQL10_50.SQLEXPRESS\MSSQL\Template Data\master.mdf -lc:\Program
Files\Microsoft SQL Server\MSSQL10_50.SQLEXPRESS\MSSQL\Template Data\mastlog.ldf)...
2014-07-12 18:22:18 Slp: Sco: Attempting to start service MSSQL$SQLEXPRESS
2014-07-12 18:22:20 Slp: Sco: Service MSSQL$SQLEXPRESS started
2014-07-12 18:22:20 Slp: Sco: Attempting to get service process id for service MSSQL$SQLEXPRESS
2014-07-12 18:22:20 Slp: Invoking QueryServiceStatusEx Win32 API
2014-07-12 18:22:20 Slp: Sco: Returning service process id 3480
2014-07-12 18:22:20 SQLEngine: : Checking Engine checkpoint 'GetSqlServerProcessHandle'
2014-07-12 18:22:22 SQLEngine: --SqlServerServiceSCM: Waiting for nt event 'Global\sqlserverRecComplete$SQLEXPRESS' to be created
2014-07-12 18:22:24 SQLEngine: --SqlServerServiceSCM: Waiting for nt event 'Global\sqlserverRecComplete$SQLEXPRESS' or sql process handle to be signaled
2014-07-12 18:22:24 SQLEngine: : Checking Engine checkpoint 'WaitSqlServerStartEvents'
2014-07-12 18:22:59 Slp: Sco: Attempting to initialize script
2014-07-12 18:23:01 Slp: Sco: Attempting to initialize default connection string
2014-07-12 18:23:03 Slp: Sco: Attempting to set script connection protocol to NotSpecified
2014-07-12 18:23:03 Slp: Sco: Attempting to set script connection protocol to NamedPipes
2014-07-12 18:23:03 SQLEngine: --SqlDatabaseServiceConfig: Connection String: Data Source=\\.\pipe\SQLLocal\SQLEXPRESS;Initial Catalog=master;Integrated Security=True;Pooling=False;Network Library=dbnmpntw;Application Name=SqlSetup
2014-07-12 18:23:03 SQLEngine: : Checking Engine checkpoint 'ServiceConfigConnect'
2014-07-12 18:23:03 SQLEngine: --SqlDatabaseServiceConfig: Connecting to SQL....
2014-07-12 18:23:03 Slp: Sco: Attempting to connect script
2014-07-12 18:23:04 Slp: Connection string: Data Source=\\.\pipe\SQLLocal\SQLEXPRESS;Initial Catalog=master;Integrated Security=True;Pooling=False;Network Library=dbnmpntw;Application Name=SqlSetup
2014-07-12 18:24:16 Slp: Sco: Connection error code from SqlException is : -2
2014-07-12 18:24:30 Slp: Watson Bucket 1
Original Parameter Values
2014-07-12 18:24:30 Slp: Parameter 0 : SQL Server 2008
R2@RTM@
2014-07-12 18:24:30 Slp: Parameter 2 : System.Data.SqlClient.SqlInternalConnection.OnError
2014-07-12 18:24:30 Slp: Parameter 3 :
Microsoft.SqlServer.Configuration.Sco.ScoException@1211@1
2014-07-12 18:24:30 Slp: Parameter 4 :
System.Data.SqlClient.SqlException@-2146232060
2014-07-12 18:24:30 Slp: Parameter 5 : SqlEngineDBStartConfigAction_install_configrc
2014-07-12 18:24:30 Slp:
Final Parameter Values
2014-07-12 18:24:30 Slp: Parameter 0 : SQL Server 2008
R2@RTM@
2014-07-12 18:24:30 Slp: Parameter 2 : 0x1BBF2F31
2014-07-12 18:24:30 Slp: Parameter 3 : 0x0A2FBD17@1211@1
2014-07-12 18:24:30 Slp: Parameter 4 : 0x3906094D
2014-07-12 18:24:30 Slp: Parameter 5 : SqlEngineDBStartConfigAction_install_configrc
2014-07-12 18:24:36 Slp: Sco: Attempting to write hklm registry key SOFTWARE\Microsoft\Microsoft SQL Server to file C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20140712_180319\Registry_SOFTWARE_Microsoft_Microsoft SQL Server.reg_
2014-07-12 18:24:36 Slp: Sco: Attempting to write hklm registry key SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall to file C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20140712_180319\Registry_SOFTWARE_Microsoft_Windows_CurrentVersion_Uninstall.reg_
2014-07-12 18:24:36 Slp: Sco: Attempting to write hklm registry key SOFTWARE\Microsoft\MSSQLServer to file C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20140712_180319\Registry_SOFTWARE_Microsoft_MSSQLServer.reg_
2014-07-12 18:25:26 Slp: Timeout expired. The timeout period elapsed prior to completion of the operation or the server is not responding.
2014-07-12 18:25:32 Slp: Watson bucket for exception based failure has been created
2014-07-12 18:25:32 SQLEngine: Copying 'c:\Program Files\Microsoft SQL Server\MSSQL10_50.SQLEXPRESS\MSSQL\Log\ERRORLOG' to 'C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20140712_180319\SQLServer_ERRORLOG_2014-07-12T18.25.32.txt' ...
2014-07-12 18:25:32 Slp: Sco: Attempting to set file full path to 'c:\Program Files\Microsoft SQL Server\MSSQL10_50.SQLEXPRESS\MSSQL\Log\ERRORLOG'
2014-07-12 18:25:32 Slp: Sco: Attempting to normalize directory path 'c:\Program Files\Microsoft SQL Server\MSSQL10_50.SQLEXPRESS\MSSQL\Log\ERRORLOG'
2014-07-12 18:25:32 Slp: Sco: Attempting to check if file 'c:\Program Files\Microsoft SQL Server\MSSQL10_50.SQLEXPRESS\MSSQL\Log\ERRORLOG' exists
2014-07-12 18:25:32 Slp: Sco: Attempting to copy file 'c:\Program Files\Microsoft SQL Server\MSSQL10_50.SQLEXPRESS\MSSQL\Log\ERRORLOG' to file 'C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20140712_180319\SQLServer_ERRORLOG_2014-07-12T18.25.32.txt'
2014-07-12 18:25:32 Slp: Sco: Attempting to check if file 'c:\Program Files\Microsoft SQL Server\MSSQL10_50.SQLEXPRESS\MSSQL\Log\ERRORLOG' exists
2014-07-12 18:25:32 Slp: Sco: Attempting to normalize directory path 'C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20140712_180319\SQLServer_ERRORLOG_2014-07-12T18.25.32.txt'
2014-07-12 18:25:32 Slp: Sco: Attempting to set file full path to 'C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20140712_180319\SQLServer_ERRORLOG_2014-07-12T18.25.32.txt'
2014-07-12 18:25:32 Slp: Sco: Attempting to normalize directory path 'C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20140712_180319\SQLServer_ERRORLOG_2014-07-12T18.25.32.txt'
2014-07-12 18:25:32 Slp: Sco: Attempting to check if directory path 'c:\Program Files\Microsoft SQL Server\MSSQL10_50.SQLEXPRESS\MSSQL\Log\ERRORLOG' is equal to path 'C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20140712_180319\SQLServer_ERRORLOG_2014-07-12T18.25.32.txt'
2014-07-12 18:25:32 Slp: Sco: Attempting to check if directory path 'c:\Program Files\Microsoft SQL Server\MSSQL10_50.SQLEXPRESS\MSSQL\Log\ERRORLOG' is equal to path 'C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20140712_180319\SQLServer_ERRORLOG_2014-07-12T18.25.32.txt'
2014-07-12 18:25:32 Slp: Sco: Attempting to normalize directory path 'c:\Program Files\Microsoft SQL Server\MSSQL10_50.SQLEXPRESS\MSSQL\Log\ERRORLOG'
2014-07-12 18:25:32 Slp: Sco: Attempting to normalize directory path 'C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20140712_180319\SQLServer_ERRORLOG_2014-07-12T18.25.32.txt'
2014-07-12 18:25:32 Slp: Sco: Attempting to get security descriptor for file 'c:\Program Files\Microsoft SQL Server\MSSQL10_50.SQLEXPRESS\MSSQL\Log\ERRORLOG'
2014-07-12 18:25:32 Slp: Sco: Attempting to check if file 'c:\Program Files\Microsoft SQL Server\MSSQL10_50.SQLEXPRESS\MSSQL\Log\ERRORLOG' exists
2014-07-12 18:25:32 Slp: Sco: Returning security descriptor O:NSG:NSD:AI(A;ID;FA;;;NS)(A;ID;FA;;;SY)(A;ID;FA;;;BA)(A;ID;FA;;;S-1-5-21-3076291671-3154185214-3698330068-1005)(A;ID;0x1201ff;;;S-1-5-21-3076291671-3154185214-3698330068-1006)
2014-07-12 18:25:32 Slp: Sco: Attempting to dispose script
Please note that this is NOT a question about fixing this one installation. This is an SQL Server Express install as part of my application install and MUST WORK FIRST TIME, EVERY TIME. Please direct me.
Paul T.Here are the parameters used with the SQL Server Express installer EXE (both x86 and x64):
/q /hideconsole /action=Install /features=SQL /instancename=SQLEXPRESS /enableranu=1 /sqlsvcaccount="NT Authority\Network Service" /AddCurrentUserAsSqlAdmin /skiprules=RebootRequiredCheck /IAcceptSQLServerLicenseTerms
I presume that TCP/IP is not enabled by default for Express installs. I THINK that named pipe should be enabled.
Summary.txt is copied below:
Overall summary:
Final result: SQL Server installation failed. To continue, investigate the reason for the failure, correct the problem, uninstall SQL Server, and then
rerun SQL Server Setup.
Exit code (Decimal): -2068119551
Exit facility code: 1211
Exit error code: 1
Exit message: SQL Server installation failed. To continue, investigate the reason for the failure, correct the problem, uninstall SQL Server, and then
rerun SQL Server Setup.
Start time: 2014-07-12 18:06:14
End time: 2014-07-12 18:25:44
Requested action: Install
Log with failure: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20140712_180319\Detail.txt
Exception help link: http%3a%2f%2fgo.microsoft.com%2ffwlink%3fLinkId%3d20476%26ProdName%3dMicrosoft%2bSQL%2bServer%26EvtSrc%3dsetup.rll%26EvtID%3d50000%26ProdVer%3d10.50.4000.0%26EvtType%3d0x1BBF2F31%400x3906094D
Machine Properties:
Machine name: WIN-EAD5VG4PBDE
Machine processor count: 1
OS version: Windows 7
OS service pack: Service Pack 1
OS region: United States
OS language: English (United States)
OS architecture: x86
Process architecture: 32 Bit
OS clustered: No
Product features discovered:
Product Instance Instance ID
Feature Language
Edition Version Clustered
Package properties:
Description: SQL Server Database Services 2008 R2
ProductName: SQL Server 2008 R2
Type: RTM
Version: 10
Installation location: c:\b610200f3dc88995d16c2effd8b6ac\x86\setup\
Installation edition: EXPRESS
Slipstream: True
SP Level 2
User Input Settings:
ACTION: Install
ADDCURRENTUSERASSQLADMIN: True
AGTSVCACCOUNT: NT AUTHORITY\NETWORK SERVICE
AGTSVCPASSWORD: *****
AGTSVCSTARTUPTYPE: Disabled
ASBACKUPDIR: Backup
ASCOLLATION: Latin1_General_CI_AS
ASCONFIGDIR: Config
ASDATADIR: Data
ASDOMAINGROUP: <empty>
ASLOGDIR: Log
ASPROVIDERMSOLAP: 1
ASSVCACCOUNT: <empty>
ASSVCPASSWORD: *****
ASSVCSTARTUPTYPE: Automatic
ASSYSADMINACCOUNTS: <empty>
ASTEMPDIR: Temp
BROWSERSVCSTARTUPTYPE: Disabled
CONFIGURATIONFILE: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20140712_180319\ConfigurationFile.ini
CUSOURCE:
ENABLERANU: True
ENU: True
ERRORREPORTING: False
FARMACCOUNT: <empty>
FARMADMINPORT: 0
FARMPASSWORD: *****
FEATURES: SQLENGINE,REPLICATION
FILESTREAMLEVEL: 0
FILESTREAMSHARENAME: <empty>
FTSVCACCOUNT: <empty>
FTSVCPASSWORD: *****
HELP: False
INDICATEPROGRESS: False
INSTALLSHAREDDIR: C:\Program Files\Microsoft SQL Server\
INSTALLSHAREDWOWDIR: C:\Program Files\Microsoft SQL Server\
INSTALLSQLDATADIR: <empty>
INSTANCEDIR: C:\Program Files\Microsoft SQL Server\
INSTANCEID: SQLEXPRESS
INSTANCENAME: SQLEXPRESS
ISSVCACCOUNT: NT AUTHORITY\NetworkService
ISSVCPASSWORD: *****
ISSVCSTARTUPTYPE: Automatic
NPENABLED: 0
PASSPHRASE: *****
PCUSOURCE: c:\b610200f3dc88995d16c2effd8b6ac\PCUSOURCE
PID: *****
QUIET: True
QUIETSIMPLE: False
ROLE: AllFeatures_WithDefaults
RSINSTALLMODE: FilesOnlyMode
RSSVCACCOUNT: NT AUTHORITY\NETWORK SERVICE
RSSVCPASSWORD: *****
RSSVCSTARTUPTYPE: Automatic
SAPWD: *****
SECURITYMODE: <empty>
SQLBACKUPDIR: <empty>
SQLCOLLATION: SQL_Latin1_General_CP1_CI_AS
SQLSVCACCOUNT: NT Authority\Network Service
SQLSVCPASSWORD: *****
SQLSVCSTARTUPTYPE: Automatic
SQLSYSADMINACCOUNTS: <empty>
SQLTEMPDBDIR: <empty>
SQLTEMPDBLOGDIR: <empty>
SQLUSERDBDIR: <empty>
SQLUSERDBLOGDIR: <empty>
SQMREPORTING: False
TCPENABLED: 0
UIMODE: AutoAdvance
X86: False
Configuration file: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20140712_180319\ConfigurationFile.ini
Detailed results:
Feature: Database Engine Services
Status: Failed: see logs for details
MSI status: Passed
Configuration status: Failed: see details below
Configuration error code:
0x0A2FBD17@1211@1
Configuration error description: Timeout expired. The timeout period elapsed prior to completion of the operation or the server is not responding.
Configuration log: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20140712_180319\Detail.txt
Feature: SQL Server Replication
Status: Failed: see logs for details
MSI status: Passed
Configuration status: Failed: see details below
Configuration error code:
0x0A2FBD17@1211@1
Configuration error description: Timeout expired. The timeout period elapsed prior to completion of the operation or the server is not responding.
Configuration log: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20140712_180319\Detail.txt
Rules with failures:
Global rules:
Scenario specific rules:
Rules report file: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20140712_180319\SystemConfigurationCheck_Report.htmd
The entire contents of the installation log can be found in ZIP format here:
https://onedrive.live.com/redir?resid=8E983C44B610198D!3984&authkey=!AFbuZaCG3Lm38Pw&ithint=folder%2c.zip
Paul T. -
SQL Server Express 2012 SP2 installation hangs during extract phase
Greetings!
I am having an issue with trying to silent install SQL Server Express 2012 SP2 (x86).
I have a proprietary installation framework, which is calling the SQL Server Express installer.
The SQL Server Express installer starts extracting files to c:\{some guid}. The folder reaches about 11 mb in size, and then nothing further happens. No activity on the machine, CPU or disk - I have waited up to 15 minutes to verify this. On the normal installation,
the size of this folder is ~650 mb.
Here are the things I've also tested:
- I'm experiencing these symptoms on both Windows 7 and Windows Server 2012 R2 (haven't tested other platforms)
- If I launch exactly the same command from the command prompt, the installation goes through as normal
- If I replace the SQL Server Express 2012 SP2 with SQL Server Express 2012 SP1, and install via our installation framework, the installation goes through as normal
- I have checked and double-checked that our installation framework is started with administrative privileges.
- From my previous search attempts, I have seen issues where the installer would hang or fail when launched from inside an msi, which would result in a log in C:\Program Files (x86)\Microsoft SQL Server\<something something>. These are not the symptoms
I am experiencing. The C:\Program Files (x86)\Microsoft SQL Server\ folder is not even created!
Any suggestions, or places I can look to figure out why it's not proceeding? For now, I have worked around the issue by including SP1 instead of SP2, but ideally I'd like to base my solution on the most recent service pack.Hello Alberto!
The installation framework does check for this. I'm also certain that these prerequisites are fulfilled.
When the SQL Server process hangs, I can kill the process, copy/paste the exact command that was executed from the installation framework's log files, and execute that command in a command prompt - and then the installation runs as expected.
The installation framework installs SQL Server Express correctly if I use the 2008 R2 SP1 express or the 2012 SP1 Express installer. It's just the SP2 installer that is giving me problems.
The only difference I can think of is that the installation framework is a 32-bit process, which calls the SQL Server installer, while the command prompt is a 64-bit application. I am installing the SQLEXPR_x86_ENU.exe
from http://www.microsoft.com/en-us/download/details.aspx?id=43351, so it should be compatible with my 32 bit environment -
"SQLEXPR_x86 is the same product but supports installation onto both 32-bit and 64-bit (WoW) operating systems"
Tomorrow, I will try:
- Installing on Windows 7 32-bit
- Trying to launch the SQL Server installer from a powershell (x86) prompt, to emulate a 32-bit environment on a 64-bit machine -
SQL Server Express is being a real pain
I've been messing with this SQL Server Express installation
since Friday and still can't get this application and database to
work together correctly. The program is written in ColdFusion, but
the errors seem to be permissions related to me but I just can't
figure it out.
I've created a user within SQL Server Management Express
program and all goes well. I then assign it as database owner for
the particular database I'm using. I've created the datasource from
within the ColdFusion administrator and it says the connection is
being made.
When trying to access the script, I get the error below.
In the SQL Management system I have tried everything that I
know to do - from adding this particular account as a user for the
"tUsers" table and giving it "Select" permissions to re-creating
the account and making it owner of the entire database. I tried
adding the schema to the front and surrounding the table name in
brackets [ ].
The database was restored from a backup on another server.
Would that cause problems at all? I just tried deleting the
database, creating it again, then restoring it from the file and
setting the owner as this user during the import process. I'm still
not having any luck though.
I've searched Google and almost every result is a forums post
from people having this same problem who have fixed it by giving
the account permission to access the database and/or table. For
some reason that isn't working for me - or I'm an idiot and missing
something.
Does anyone have any ideas?At first, no, I couldn't perform any queries at all against
the database.
I fixed the problem by editing the "server" in the CF admin
for this datasource and making it:
localhost/SQLEXPRESS
CF Admin says it doesn't verify, but if I attach the username
and password to each CFQUERY statement they work!
Very strange problem. I'm not sure if this is a 'feature' or
a known bug, but I don't see any reason why that connection doesn't
verify. Especially since if it would've I could have saved myself
countless hours of work.
Oh well - thanks everyone for your suggestions and
help! -
SQL Server Express 2014 Installation Completes with Failures and Repair Does Nothing to Help
I am attempting to install SQL Server Express 2014 on a development machine and as usual old versions of SQL and the remnants of them are a plague to the installation.
I have used to Revo Uninstaller to scrub the old installations and with my first attempt after some additional work on the registry I was able to get an instance to install and remarkably I was able to connect to the instance. However, I removed an application
reference to SQL Server 2008 after the SQL Express 2014 installation (through Control Panel > Programs > Programs and Features) and it stopped working immediately.
So I removed (uninstalled using Revo Uninstaller) every reference to any SQL Server application as well as removed all of the registry references (using Revo) and I can now install SQL Server Express 2014 with
"Feature" failures [Reporting Services, Database Engine Services, Full-Text and Semantic Extractions for Search and SQL
Server Replication] and of course it doesn't work.
Now when I attempt "Repair" the installation the process ends normally (no errors) and reports "Success" however SQL still has no instance and the services are not running nor are they visible when I open the "SQL Server Configuration
Manager".
This is the "Repair" log:
Overall summary:
Final result: Passed
Exit code (Decimal): 0
Start time: 2014-12-21 17:21:37
End time: 2014-12-21 17:29:10
Requested action: Repair
Machine Properties:
Machine name: EDWARD-PC2
Machine processor count: 4
OS version: Windows 7
OS service pack: Service Pack 1
OS region: United States
OS language: English (United States)
OS architecture: x86
Process architecture: 32 Bit
OS clustered: No
Product features discovered:
Product Instance Instance ID Feature Language Edition Version Clustered Configured
SQL Server 2014 Management Tools - Basic 1033 Express Edition 12.0.2000.8 No Yes
SQL Server 2014 Management Tools - Complete 1033 Express Edition 12.0.2000.8 No Yes
SQL Server 2014 Client Tools Connectivity 1033 Express Edition 12.0.2000.8 No Yes
SQL Server 2014 Client Tools Backwards Compatibility 1033 Express Edition 12.0.2000.8 No Yes
SQL Server 2014 Client Tools SDK 1033 Express Edition 12.0.2000.8 No Yes
SQL Server 2014 LocalDB 1033 Express Edition 12.0.2000.8 No Yes
Package properties:
Description: Microsoft SQL Server 2014
ProductName: SQL Server 2014
Type: RTM
Version: 12
SPLevel: 0
Installation location: C:\Users\Edward\Downloads\SQLEXPRADV_x86_ENU\x86\setup\
Installation edition:
User Input Settings:
ACTION: Repair
AGTDOMAINGROUP: <empty>
AGTSVCACCOUNT: <empty>
AGTSVCPASSWORD: <empty>
AGTSVCSTARTUPTYPE: Manual
ASCONFIGDIR: Config
ASSVCACCOUNT: <empty>
ASSVCPASSWORD: <empty>
CLTSTARTUPTYPE: 0
CLTSVCACCOUNT: <empty>
CLTSVCPASSWORD: <empty>
CONFIGURATIONFILE:
CTLRSTARTUPTYPE: 0
CTLRSVCACCOUNT: <empty>
CTLRSVCPASSWORD: <empty>
ENU: true
FAILOVERCLUSTERGROUP: <empty>
FAILOVERCLUSTERNETWORKNAME: <empty>
FTSVCACCOUNT: <empty>
FTSVCPASSWORD: <empty>
HELP: false
IACCEPTSQLSERVERLICENSETERMS: false
INDICATEPROGRESS: false
INSTANCENAME: <empty>
ISSVCACCOUNT: NT AUTHORITY\Network Service
ISSVCPASSWORD: <empty>
ISSVCSTARTUPTYPE: Automatic
QUIET: false
QUIETSIMPLE: false
SQLSVCACCOUNT: <empty>
SQLSVCPASSWORD: <empty>
UIMODE: AutoAdvance
X86: false
Configuration file: C:\Program Files\Microsoft SQL Server\120\Setup Bootstrap\Log\20141221_172135\ConfigurationFile.ini
Detailed results:
Feature: Management Tools - Complete
Status: Passed
Feature: Client Tools Connectivity
Status: Passed
Feature: Client Tools SDK
Status: Passed
Feature: Client Tools Backwards Compatibility
Status: Passed
Feature: Management Tools - Basic
Status: Passed
Feature: SQL Browser
Status: Passed
Feature: Documentation Components
Status: Passed
Feature: SQL Writer
Status: Passed
Feature: LocalDB
Status: Passed
Feature: SQL Client Connectivity
Status: Passed
Feature: SQL Client Connectivity SDK
Status: Passed
Feature: Setup Support Files
Status: Passed
Rules with failures:
Global rules:
There are no scenario-specific rules.
Rules report file: C:\Program Files\Microsoft SQL Server\120\Setup Bootstrap\Log\20141221_172135\SystemConfigurationCheck_Report.htm
However this is what the "SQL Sever Configuration Manager" look like:
Why does this appear to not be working properly? I can not connect the the "local" instance and I would guess that the service either does not exist or is not running.
Edward WalkerHello,
To my knowledge, Revo is not a supported way to uninstall SQL Server.
Please try to uninstall all you can using Control Panel -> Programs and Features, then perform a manual uninstall to
remove remnants. Try the following procedure:
1. Uninstall all SQL Server 2012 components you can using Control Panel -> Programs and Features
2. Backup the registry.
3. Delete the following keys in regedit:
--HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Microsoft SQL Server
--HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\MSSQLServer
4. Go to HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall and delete all the sub-keys referencing
SQL Server.
5. Go to HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services and delete all the keys referencing SQL Server.
6. Rename all the SQL Server folders in the computer like C:\Program Files\Microsoft SQL Server and subfolders.
After performing above procedure, try to reinstall SQL Server again.
Hope this helps.
Regards,
Alberto Morillo
SQLCoffee.com -
SQL Server Express 2005 to 2014 upgrade and Uninstallation issues
We have client application running SQL Server Express that connects to a SQL Server 2012 server. We are attempting to upgrade from Microsoft SQL 2005 express to Microsoft SQL Server 2014
express – but are having difficulties – especially with uninstall.
Our understanding is that we needed to follow the following steps:
First we install Microsoft SQL 2005 express SP4 as required silently
Start /wait SQLEXPR.exe /qn ACTION=UPGRADE INSTANCENAME="SQLEXPRESS" UPGRADE=SQL_Engine SAPWD=<password>
SQLACCOUNT="NT AUTHORITY\SYSTEM" SQLPASSWORD= SECURITYMODE="SQL"
Then try upgrading with Microsoft SQL Server 2014 express, we use following command to do it silently
SQLEXPR.exe /q /ACTION=upgrade /INSTANCENAME=SQLEXPRESS /ISSVCAccount="NT AUTHORITY\SYSTEM" /IACCEPTSQLSERVERLICENSETERMS
We see following
In Control Panel -> Uninstall or change program, we have all the instances listed 2005, 2008, 2012 and 2014.
How do we uninstall the instance? , We try uninstalling 2014
But it is not cleanly uninstalled.
Questions:
Is there any way for clean upgrade from Microsoft SQL 2005 express SP3 to Microsoft SQL 2014 express?
Is there any specific steps suggested to uninstall upgraded SQL 2014 express from system?
Are we doing anything wrong in commands for silent upgrade?
Thanks in advance.Hello,
After you perform an in-place upgrade it’s normal to find the binaries and references of the old version of SQL Server on the Start Menu and Control Panel -> Programs and Features. That’s by design. After you have successfully upgraded an instance, you can
remove the old binaries.
IfIf you find some remnants after uninstalling SQL Server 2014, please perform the following steps to manually uninstall it:
1. Uninstall all SQL Server 2014 components you can using Control Panel -> Programs and
Features
2. Backup the registry.
3. Delete the following keys in regedit:
--HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Microsoft SQL Server
--HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\MSSQLServer
4. Go to HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall and delete
all the sub-keys referencing SQL Server.
5. Go to HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services and delete all the keys referencing
SQL Server.
6. Rename all the SQL Server folders in the computer like
C:\Program Files\Microsoft SQL Server and subfolders.
Hope this helps.
Regards,
Alberto Morillo
SQLCoffee.com -
Issues using BitLocker in Windows 8 Emedded with 2012 SQL Server Express
I was told that this forum may be able to help me with my issues (see original thread here:
https://social.msdn.microsoft.com/Forums/sqlserver/en-US/8c81fde1-e91b-46eb-8d2f-b79426805ddd/using-sql-server-2012-express-with-bitocker?forum=sqlexpress).
Background:
To summarize, I have an OS that is partitioned into two volumes: C and D.
C drive contains the running software, SQL Server install, and the OS.
D drive is the encrypted partition via BitLocker. The SQL Server files are stored here (logs, backup, and mdf).
Problem:
The software cannot connect to the database stored on the encrypted D volume when BitLocker is turned on. The user account that I use to enable BitLocker is the same SQL Server Service account and has is also part of the Local Admin Group. As soon as I disable
BitLocker, the software works fine and the database connection succeeds. I am currently using the SQL System Admin account to login (SA) and BitLocker is being used with a TPM.
The error I am experiencing when connecting through the software is 'login
failed for user sa'.
Thank you for the suggestions/help.Hi HMLunger,
Did you install the SQL Server instance successfully? If not, please help to post the summary and detail logs for analysis. By default, the logs can be found in: C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log.
However, if you fail to start SQL Server Express service after successfully installing SQL Server,
you might have to change the paths of the files by running the following scripts from the command prompt. For more details, please review this similar
thread.
NET START MSSQL$SQLEXPRESS /f /T3608
SQLCMD -S .\SQLEXPRESS
ALTER DATABASE model MODIFY FILE (NAME = logical_name , FILENAME = 'new_path\os_file_name');
ALTER DATABASE model MODIFY FILE (NAME = logical_name , FILENAME = 'new_path\os_file_name');
go
exit;
ALTER DATABASE msdb MODIFY FILE (NAME = logical_name , FILENAME = 'new_path\os_file_name');
ALTER DATABASE msdb MODIFY FILE (NAME = logical_name , FILENAME = 'new_path\os_file_name');
NET STOP MSSQL$SQLEXPRESS
In addition, you can follow the steps in this KB article to uninstall SQL Server.
Thanks,
Lydia Zhang
Lydia Zhang
TechNet Community Support
Maybe you are looking for
-
Dynamic Region in Popup - clientListener problem?
Hello, I'm working in Jdeveloper 11.1.1.2, following the popup/region pattern found at: http://www.oracle.com/technology/products/adf/patterns/11/popupregionpattern.pdf to have a dynamic region in a popup. I already have a working implementation on o
-
Patching ST_PI, open conversions in ABAP dictionary
Hello during a patching of ST-21 2008 the tool stops at CHECK_REQUIREMENTS phase with the screen: open conversions in ABAP dictionary Some open conversion requests still exist in the ABAP Dictionary for the following ABAP Dictionary objects. To avoid
-
My skype number is already being used by another b...
I just bought a Skype number and minutes. When I call the number, I hear a greeting for a local business here in town. Has it been provisioned correctly?
-
Ok my virus protection, I use Kaspersky, is detecting a packer every time I try to load Farmville on Facebook. This results in the game reloading over and over again. These pop up quickly with about blank in the address but nothing else. The path for
-
MRP recommendation -- Do a Stock transfer instead of Purch or prodn Order..
With the MRP report recommendations you can either select to fulfill the recomendation by Purchase Order or Production Order. is it possible to add another option i.e Stock Transfer. I.E Customer has mutliple warehouses in different regions and they