SQL Server Management Express for Windows 8
Is there an SQL Server Management Express version for Windows 8? I tried using the 2005 and 2008 Express version but get an error indicating Windows 8 is not compatible. Thanks
Hello,
Please download it from the following URL fully compatible with Windows 8.x.
http://www.microsoft.com/en-us/download/details.aspx?id=29062
ENU\x64\SQLManagementStudio_x64_ENU.exe
ENU\x86\SQLManagementStudio_x86_ENU.exe
Hope this helps.
Regards,
Alberto Morillo
SQLCoffee.com
Similar Messages
-
I read this kb - http://support.microsoft.com/kb/2681562/en-us, but doesn't get exact answer.
I need to install vWorkspace 8 on server w2k12. It install SQL Server 2008 Express during installation and I got error.
So, is it possible to install Microsoft SQL Server 2008 (R2) Express on windows server 2012 (not R2) ?I read this kb - http://support.microsoft.com/kb/2681562/en-us, but doesn't get exact answer.
I need to install vWorkspace 8 on server w2k12. It install SQL Server 2008 Express during installation and I got error.
So, is it possible to install Microsoft SQL Server 2008 (R2) Express on windows server 2012 (not R2) ?
Yes you can install SQL server 2008 express on windows 2012 OS see below link
http://msdn.microsoft.com/en-us/library/ms143506(v=sql.100).aspx#Express32
Please mark this reply as the answer or vote as helpful, as appropriate, to make it useful for other readers -
SQL Server 2012 Express on Window 8.1 64 bit version?
Hi,
I´m trying to install SQL Server 2012 Express on Windows 8.1 64 bit version. When I reach the point of "Installing Setup Files", of the installation process, the installation seems to halt. I´ve tried both the 32 bit and 64 bit versions of SQL 2012
Express. I´ve installed SQL 2012 Express several times before on other Windows versions but I´ve never encountered this problem. Is it a known SQL Server 2012 Express/Windows 8.1 64 bit compability problem?
Thanks in advance!
MartinSQL Server 2012 express can be installed in windows 8.1 all you need to take care is that you meet
hardware and software requirements . Please read the article in hyperlink carefully.Make sure you have internet connection because it is required. Make sure you meet all .net
framework requirements
Below link would be helpful as well.
How to use SQL server on Windows 8 environment
Please remove any previous failed installation of SQL server from add remove program. If you still face issue please refer to Solution section of
this link for manual un installation.
Finally you can locate log files present at location
C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log\summry.txt for details about log
Please mark this reply as answer if it solved your issue or vote as helpful if it helped so that other forum members can benefit from it.
My TechNet Wiki Articles -
Free Download Sql Server 2012 Full for windows 7 64 bit
hi,
im new here and i want to download sql server 2012 complete for windows 7 64 bit.
If any one help me to find it.You need to buy SQL Server 2012 Developer Edition for 50$ or as Shanky_621 suggested
download a free edition named SQL EXPRESS which has some limitations.
Best Regards,Uri Dimant SQL Server MVP,
http://sqlblog.com/blogs/uri_dimant/
MS SQL optimization: MS SQL Development and Optimization
MS SQL Consulting:
Large scale of database and data cleansing
Remote DBA Services:
Improves MS SQL Database Performance
SQL Server Integration Services:
Business Intelligence -
SSMS for SQL Server 2012 Express on Windows Embedded 8 Standard
Hello,
I have installed SQL Server 2012 Express with Advanced Tools (SQLEXPRADV_x64_ENU.exe, downloaded from MS website) on Windows Embedded 8 Standard 64-bit. But, when I try to find SQL Server Management Studio, I realized it's not installed (same installation
package works fine on my Windows 8.1 Pro 64-bit laptop, where SSMS gets installed). How do I fix this? And any other ways for trouble-shooting DBs on Windows Embedded 8 Standard?
Thanks,
JayBelow is the content of a summary file for the installation. BTW, I also try to find its ConfigurationFile.ini file for future installation on other computers, but it's not in the folder specified in the summary file either (see below).
Thanks.
Overall summary:
Final result: Passed
Exit code (Decimal): 0
Start time: 2014-04-15 13:57:59
End time: 2014-04-15 14:13:29
Requested action: Install
Machine Properties:
Machine name: AIMB-584
Machine processor count: 4
OS version: Future Windows Version
OS service pack:
OS region: United States
OS language: English (United States)
OS architecture: x64
Process architecture: 64 Bit
OS clustered: No
Product features discovered:
Product Instance Instance ID Feature
Language Edition Version Clustered
Package properties:
Description: Microsoft SQL Server 2012 Service Pack 1
ProductName: SQL Server 2012
Type: RTM
Version: 11
SPLevel: 0
Installation location: c:\e089c9dde791653620\x64\setup\
Installation edition: Express
Product Update Status:
None discovered.
User Input Settings:
ACTION: Install
ADDCURRENTUSERASSQLADMIN: true
AGTSVCACCOUNT: NT AUTHORITY\NETWORK SERVICE
AGTSVCPASSWORD: *****
AGTSVCSTARTUPTYPE: Disabled
ASBACKUPDIR: Backup
ASCOLLATION: Latin1_General_CI_AS
ASCONFIGDIR: Config
ASDATADIR: Data
ASLOGDIR: Log
ASPROVIDERMSOLAP: 1
ASSERVERMODE: MULTIDIMENSIONAL
ASSVCACCOUNT: <empty>
ASSVCPASSWORD: <empty>
ASSVCSTARTUPTYPE: Automatic
ASSYSADMINACCOUNTS: <empty>
ASTEMPDIR: Temp
BROWSERSVCSTARTUPTYPE: Automatic
CLTCTLRNAME: <empty>
CLTRESULTDIR: <empty>
CLTSTARTUPTYPE: 0
CLTSVCACCOUNT: <empty>
CLTSVCPASSWORD: <empty>
CLTWORKINGDIR: <empty>
COMMFABRICENCRYPTION: 0
COMMFABRICNETWORKLEVEL: 0
COMMFABRICPORT: 0
CONFIGURATIONFILE:
CTLRSTARTUPTYPE: 0
CTLRSVCACCOUNT: <empty>
CTLRSVCPASSWORD: <empty>
CTLRUSERS: <empty>
ENABLERANU: true
ENU: true
ERRORREPORTING: false
FEATURES: SQLENGINE, REPLICATION, FULLTEXT, RS, BIDS, BOL, SSMS, SNAC_SDK, LOCALDB
FILESTREAMLEVEL: 0
FILESTREAMSHARENAME: <empty>
FTSVCACCOUNT: NT Service\MSSQLFDLauncher$SQLEXPRESS
FTSVCPASSWORD: <empty>
HELP: false
IACCEPTSQLSERVERLICENSETERMS: false
INDICATEPROGRESS: false
INSTALLSHAREDDIR: C:\Program Files\Microsoft SQL Server\
INSTALLSHAREDWOWDIR: C:\Program Files (x86)\Microsoft SQL Server\
INSTALLSQLDATADIR: <empty>
INSTANCEDIR: C:\Program Files\Microsoft SQL Server\
INSTANCEID: SQLEXPRESS
INSTANCENAME: SQLEXPRESS
ISSVCACCOUNT: NT AUTHORITY\Network Service
ISSVCPASSWORD: <empty>
ISSVCSTARTUPTYPE: Automatic
MATRIXCMBRICKCOMMPORT: 0
MATRIXCMSERVERNAME: <empty>
MATRIXNAME: <empty>
NPENABLED: 0
PID: *****
QUIET: false
QUIETSIMPLE: false
ROLE: AllFeatures_WithDefaults
RSINSTALLMODE: DefaultNativeMode
RSSHPINSTALLMODE: DefaultSharePointMode
RSSVCACCOUNT: NT Service\ReportServer$SQLEXPRESS
RSSVCPASSWORD: <empty>
RSSVCSTARTUPTYPE: Automatic
SAPWD: *****
SECURITYMODE: SQL
SQLBACKUPDIR: <empty>
SQLCOLLATION: SQL_Latin1_General_CP1_CI_AS
SQLSVCACCOUNT: NT Service\MSSQL$SQLEXPRESS
SQLSVCPASSWORD: *****
SQLSVCSTARTUPTYPE: Automatic
SQLSYSADMINACCOUNTS: AIMB-584\User
SQLTEMPDBDIR: <empty>
SQLTEMPDBLOGDIR: <empty>
SQLUSERDBDIR: <empty>
SQLUSERDBLOGDIR: <empty>
SQMREPORTING: false
TCPENABLED: 0
UIMODE: AutoAdvance
UpdateEnabled: true
UpdateSource: MU
X86: false
Configuration file: C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log\20140415_135512\ConfigurationFile.ini
Detailed results:
Feature: Management Tools - Basic
Status: Passed
Feature: SQL Server Data Tools
Status: Passed
Feature: Reporting Services - Native
Status: Passed
Feature: Database Engine Services
Status: Passed
Feature: Full-Text and Semantic Extractions for Search
Status: Passed
Feature: SQL Server Replication
Status: Passed
Feature: SQL Browser
Status: Passed
Feature: Documentation Components
Status: Passed
Feature: SQL Writer
Status: Passed
Feature: LocalDB
Status: Passed
Feature: SQL Client Connectivity
Status: Passed
Feature: SQL Client Connectivity SDK
Status: Passed
Rules with failures:
Global rules:
Scenario specific rules:
Rules report file: C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log\20140415_135512\SystemConfigurationCheck_Report.htm -
Hi,
I have installed SQL Server 2012 Express edition (name of installation media: en_sql_server_2012_express_edition_with_advanced_services_x64.exe) from MSDN and I have installed the application on my pc with Windows 7 Exterprise.
Everything is working fine except when I am trying to create "New Database Diagram", where I recieve following error message:
TITLE: Microsoft SQL Server Management Studio
Attempted to read or write protected memory. This is often an indication that other memory is corrupt. (Microsoft.VisualStudio.OLE.Interop)
BUTTONS:
OK
I have tried two times to reinstall SQL Server 2012 Express and I have installed Cumulative Update #3 for SQL Server 2012 and restarted the machine, but I have still the same problem with the same error message.
Installed the following fixes:
1) 2012_RTM_DAC_CU3_2723749_11_0_2332_x64
2) SQLServer2012_RTM_CU3_2723749_11_0_2332_x64
These files was installed successful.
How can I solve the problem?
BR
Jan NilssonHi Jan,
Have you installed Visual Studio in your machine?
The problem seems to be related to installing and uninstalling the VS 2011 RC0 program.
The workaround involves copying the files from another PC with SQL 2008 or 2012 from one machine to another. Just replace this folder:
C:\Program Files (x86)\Common Files\microsoft shared\MSDesigners8
See also the following for further details:
http://social.msdn.microsoft.com/Forums/en-GB/vstsdb/thread/d65c71f5-3887-4f2a-bbd3-e799a4ac6fdc
Best Regards,
Iric
Please remember to mark the replies as answers if they help and unmark them if they provide no help. -
How to install SQL server 2008 express on Windows server 2008 R2 standard OS
Hi,
I have Windows server 2008 R2 Standard edition (64-bit) and trying to install SQL server 2008 express edition since I do not have SQL server 2008. When I install it I am unable to see Management Studio so I am trying to install management studio as well
but still I am facing issue. Please let me know whether SQL server 2008 express edition is compatible with Windows server 2008 R2 Standard. If not then pls let me know the proper steps to install it.
RegdsHello,
Service Pack 1 for SQL Server 2008 is required to be compatible with Windows Server 2008 R2.
Please download QL Server 2008 Express with SP1 included from the following link:
http://www.microsoft.com/en-us/download/details.aspx?id=25052
Hope this helps.
Regards,
Alberto Morillo
SQLCoffee.com -
Overlapped I/O error 997 installing SQL Server 2014 Express on Windows Server 2012 R2
I'm attempting to install SQL Server 2014 Express on a Windows Server 2012 R2 system. When I do the install, it fails (several times) with an "Error: 997. Overlapped I/O operation is in progress.". From searching the web, I can see many people
have had this problem with this installer and other non-SQL server installers.
I've tried every solution I can find discussed, but none help with my problems The system is fully updated, with the exception of the KB2538243 (VC 2008 SP1 redist), which is probably failing for the same reason.
I've tried removing several updates mentioned in other articles (KB2918614). I've confirmed that I'm not using a temporary profile.
Does anyone have an idea of how I can solve this issue?
Thanks,
Zack
Partial detail from install log file:
Detailed results:
Feature: Management Tools - Complete
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, and then try the setup process again.
Component name: Microsoft Visual Studio 2010 Redistributables
Component error code: 997
Component log file: C:\Program Files\Microsoft SQL Server\120\Setup Bootstrap\Log\20150205_151618\VC10Redist_Cpu64_1.log
Error description: Error 997.Overlapped I/O operation is in progress.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=12.0.2000.8&EvtType=vc_red.msi%40ProcessComponents%40997
Feature: Client Tools Connectivity
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, and then try the setup process again.
Component name: Microsoft Visual Studio 2010 Redistributables
Component error code: 997
Component log file: C:\Program Files\Microsoft SQL Server\120\Setup Bootstrap\Log\20150205_151618\VC10Redist_Cpu64_1.log
Error description: Error 997.Overlapped I/O operation is in progress.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=12.0.2000.8&EvtType=vc_red.msi%40ProcessComponents%40997
Partial detail from component log file:
MSI (s) (D8:3C) [15:18:29:173]: Resolving source.
MSI (s) (D8:3C) [15:18:29:173]: Resolving source to launched-from source.
MSI (s) (D8:3C) [15:18:29:173]: Setting launched-from source as last-used.
MSI (s) (D8:3C) [15:18:29:188]: PROPERTY CHANGE: Adding SourceDir property. Its value is 'C:\Users\zerhart\Downloads\SQLEXPRWT_x64_ENU\redist\VisualStudioShell\VC10SP1\x64\'.
MSI (s) (D8:3C) [15:18:29:188]: PROPERTY CHANGE: Adding SOURCEDIR property. Its value is 'C:\Users\zerhart\Downloads\SQLEXPRWT_x64_ENU\redist\VisualStudioShell\VC10SP1\x64\'.
MSI (s) (D8:3C) [15:18:29:188]: PROPERTY CHANGE: Adding SourcedirProduct property. Its value is '{1D8E6291-B0D5-35EC-8441-6616F567A0F7}'.
MSI (s) (D8:3C) [15:18:29:188]: SOURCEDIR ==> C:\Users\zerhart\Downloads\SQLEXPRWT_x64_ENU\redist\VisualStudioShell\VC10SP1\x64\
MSI (s) (D8:3C) [15:18:29:188]: SOURCEDIR product ==> {1D8E6291-B0D5-35EC-8441-6616F567A0F7}
MSI (s) (D8:3C) [15:18:29:188]: SECREPAIR: A general error running CryptAcquireContext
MSI (s) (D8:3C) [15:18:29:188]: Determining source type
MSI (s) (D8:3C) [15:18:29:188]: Source type from package 'VC_RED.MSI': 2
MSI (s) (D8:3C) [15:18:29:188]: SECREPAIR: Hash Database: C:\Windows\Installer\SourceHash{1D8E6291-B0D5-35EC-8441-6616F567A0F7}
MSI (s) (D8:3C) [15:18:29:188]: SECREPAIR: SourceHash database file already exists. Deleting it.
MSI (s) (D8:3C) [15:18:29:204]: Note: 1: 2262 2: SourceHash 3: -2147287038
MSI (s) (D8:3C) [15:18:29:235]: SECREPAIR: New Hash Database creation complete.
MSI (s) (D8:3C) [15:18:29:235]: SECREPAIR: Crypt Provider not initialized. Error:0
MSI (s) (D8:3C) [15:18:29:235]: SECREPAIR: Crypt Provider not initialized. Error:0
MSI (s) (D8:3C) [15:18:29:235]: SECREPAIR: Crypt Provider not initialized. Error:0
MSI (s) (D8:3C) [15:18:29:235]: SECREPAIR: Crypt Provider not initialized. Error:0
MSI (s) (D8:3C) [15:18:29:235]: SECREPAIR: Crypt Provider not initialized. Error:0
MSI (s) (D8:3C) [15:18:29:235]: SECREPAIR: Crypt Provider not initialized. Error:0
MSI (s) (D8:3C) [15:18:29:235]: SECREPAIR: Crypt Provider not initialized. Error:997
MSI (s) (D8:3C) [15:18:29:235]: SECUREREPAIR: Failed to CreateContentHash of the file: install.res.1040.dll: for computing its hash. Error: 997
MSI (s) (D8:3C) [15:18:29:235]: SECREPAIR: Failed to create hash for the install source files
MSI (s) (D8:3C) [15:18:29:235]: SECUREREPAIR: SecureRepair Failed. Error code: 3e561F257D8
Action start 15:18:29: ProcessComponents.
MSI (s) (D8:3C) [15:19:28:843]:
Error 997.Overlapped I/O operation is in progress.Alberto,
Thanks for your help. Unfortunately, I've already tried that. I did try it again and I get an "This update is not applicable to your computer."
I tried to post the Windows Update log, but it was too large. I've posted some of it below.
Here is the WU log:
2015-02-06 11:24:25:793
5048 50
Misc =========== Logging initialized (build: 7.9.9600.17489, tz: -0500) ===========
2015-02-06 11:24:25:793
5048 50
Misc = Process: C:\Windows\system32\wusa.exe
2015-02-06 11:24:25:793
5048 50
Misc = Module: C:\Windows\System32\wuapi.dll
2015-02-06 11:24:25:793
5048 50
COMAPI ----------- COMAPI: IUpdateServiceManager::AddScanPackageService -----------
2015-02-06 11:24:25:793
5048 50
COMAPI - ServiceName = Windows Update Standalone Installer
2015-02-06 11:24:25:793
5048 50
COMAPI - ScanFileLocation = C:\c5f288db3c43a7e4613232ca1a3c\wsusscan.cab
2015-02-06 11:24:25:808
920 111c
Misc =========== Logging initialized (build: 7.9.9600.17489, tz: -0500) ===========
2015-02-06 11:24:25:808
920 111c
Misc = Process: C:\Windows\system32\svchost.exe
2015-02-06 11:24:25:808
920 111c
Misc = Module: c:\windows\system32\wuaueng.dll
2015-02-06 11:24:25:808
920 111c
Service *************
2015-02-06 11:24:25:808
920 111c
Service ** START ** Service: Service startup
2015-02-06 11:24:25:808
920 111c
Service *********
2015-02-06 11:24:25:824
920 111c
IdleTmr Non-AoAc machine. Aoac operations will be ignored.
2015-02-06 11:24:25:824
920 111c
Agent * WU client version 7.9.9600.17489
2015-02-06 11:24:25:824
920 111c
Agent WARNING: SleepStudyTracker: Machine is non-AOAC. Sleep study tracker disabled.
2015-02-06 11:24:25:824
920 111c
Agent * Base directory: C:\Windows\SoftwareDistribution
2015-02-06 11:24:25:824
920 111c
Agent * Access type: No proxy
2015-02-06 11:24:25:824
920 111c
Service UpdateNetworkState Ipv6, cNetworkInterfaces = 12.
2015-02-06 11:24:25:824
920 111c
Service UpdateNetworkState Ipv4, cNetworkInterfaces = 4.
2015-02-06 11:24:25:824
920 111c
Agent * Network state: Connected
2015-02-06 11:24:25:824
920 111c
Service UpdateNetworkState Ipv6, cNetworkInterfaces = 12.
2015-02-06 11:24:25:824
920 111c
Service UpdateNetworkState Ipv4, cNetworkInterfaces = 4.
2015-02-06 11:24:25:855
920 b64
Misc WARNING: Network Cost is assumed to be not supported as something failed with trying to get handles to wcmapi.dll
2015-02-06 11:24:25:855
920 111c
Agent *********** Agent: Initializing global settings cache ***********
2015-02-06 11:24:25:887
920 111c
Agent * Endpoint Provider: 00000000-0000-0000-0000-000000000000
2015-02-06 11:24:25:887
920 111c
Agent * WSUS server: <NULL>
2015-02-06 11:24:25:887
920 111c
Agent * WSUS status server: <NULL>
2015-02-06 11:24:25:887
920 111c
Agent * Target group: (Unassigned Computers)
2015-02-06 11:24:25:887
920 111c
Agent * Windows Update access disabled: No
2015-02-06 11:24:25:902
920 b64
WuTask WuTaskManager delay initialize completed successfully..
2015-02-06 11:24:25:902
920 b64
AU Timer: 31DA7559-FE27-4810-8FF6-987195B1FD98, Expires 2015-02-07 08:14:01, not idle-only, not network-only
2015-02-06 11:24:25:902
920 b64
AU Timer: CF1ABEC6-7887-4964-BB93-B2E21B31CEC1, Expires 2015-02-06 19:30:54, not idle-only, not network-only
2015-02-06 11:24:25:902
920 b64
AU Timer: 29A863E7-8609-4D1E-B7CD-5668F857F1DB, Expires 2015-02-06 19:30:54, not idle-only, not network-only
2015-02-06 11:24:25:902
920 b64
Report WARNING: CSerializationHelper:: InitSerialize failed : 0x80070002
2015-02-06 11:24:25:902
920 b64
Report CWERReporter::Init succeeded
2015-02-06 11:24:25:902
920 b64
Agent *********** Agent: Initializing Windows Update Agent ***********
2015-02-06 11:24:25:902
920 b64
DnldMgr Download manager restoring 0 downloads
2015-02-06 11:24:25:902
920 111c
AU ########### AU: Initializing Automatic Updates ###########
2015-02-06 11:24:25:902
920 111c
AU AIR Mode is disabled
2015-02-06 11:24:25:902
920 111c
AU # Approval type: Scheduled (User preference)
2015-02-06 11:24:25:902
920 111c
AU # Auto-install minor updates: Yes (User preference)
2015-02-06 11:24:25:902
920 111c
AU # Will interact with non-admins (Non-admins are elevated (User preference))
2015-02-06 11:24:25:902
920 111c
Misc WARNING: IsSessionRemote: WinStationQueryInformationW(WTSIsRemoteSession) failed for session 2, GetLastError=2250
2015-02-06 11:24:25:918
920 111c
AU WARNING: Failed to get Wu Exemption info from NLM, assuming not exempt, error = 0x80240037
2015-02-06 11:24:25:918
920 111c
AU WARNING: Failed to get Network Cost info from NLM, assuming network is NOT metered, error = 0x80240037
2015-02-06 11:24:25:918
920 111c
AU AU finished delayed initialization
2015-02-06 11:24:25:933
920 111c
AU WARNING: Failed to get Network Cost info from NLM, assuming network is NOT metered, error = 0x80240037
2015-02-06 11:24:25:933
920 111c
AU WARNING: Failed to get Network Cost info from NLM, assuming network is NOT metered, error = 0x80240037
2015-02-06 11:24:25:933
920 b64
Misc Validating signature for C:\Windows\SoftwareDistribution\ScanFile\a487aa0f-3e53-4fee-a784-6171b00254e4\Source.cab with dwProvFlags 0x00000080:
2015-02-06 11:24:25:933
920 111c
AU Adding timer:
2015-02-06 11:24:25:933
920 111c
AU Timer: 31DA7559-FE27-4810-8FF6-987195B1FD98, Expires 2015-02-07 08:14:01, not idle-only, not network-only
2015-02-06 11:24:25:949
920 af0
DnldMgr Asking handlers to reconcile their sandboxes
2015-02-06 11:24:25:949
920 b64
Misc Microsoft signed: Yes
2015-02-06 11:24:26:154
920 b64
DtaStor Default service for AU is {7971F918-A847-4430-9279-4A52D1EFE18D}
2015-02-06 11:24:26:154
920 b64
IdleTmr Incremented idle timer priority operation counter to 1
2015-02-06 11:24:26:154
5048 50
COMAPI - Added scan package service, ServiceID = {A487AA0F-3E53-4FEE-A784-6171B00254E4} Third party service
2015-02-06 11:24:26:154
5048 50
COMAPI -------------
2015-02-06 11:24:26:154
5048 50
COMAPI -- START -- COMAPI: Init Search [ClientId = wusa]
2015-02-06 11:24:26:154
5048 50
COMAPI ---------
2015-02-06 11:24:26:154
5048 50
COMAPI -------------
2015-02-06 11:24:26:154
5048 50
COMAPI -- START -- COMAPI: Search [ClientId = wusa]
2015-02-06 11:24:26:154
5048 50
COMAPI ---------
2015-02-06 11:24:26:169
920 b64
IdleTmr WU operation (CSearchCall::Init ID 1) started; operation # 17; does use network; is not at background priority
2015-02-06 11:24:26:169
920 b64
IdleTmr Incremented idle timer priority operation counter to 2
2015-02-06 11:24:26:341
920 b64
Report *********** Report: Initializing static reporting data ***********
2015-02-06 11:24:26:341
920 b64
Report * OS Version = 6.3.9600.0.0.131344
2015-02-06 11:24:26:341
920 b64
Report * OS Product Type = 0x00000021
2015-02-06 11:24:26:357
920 b64
Report * Computer Brand = PowerSpec
2015-02-06 11:24:26:357
920 b64
Report * Computer Model = S Series
2015-02-06 11:24:26:357
920 b64
Report * Platform Role = 1
2015-02-06 11:24:26:357
920 b64
Report * AlwaysOn/AlwaysConnected (AOAC) = 0
2015-02-06 11:24:26:357
920 b64
Report * Bios Revision = 1.1a
2015-02-06 11:24:26:357
920 b64
Report * Bios Name = 1.1a
2015-02-06 11:24:26:357
920 b64
Report * Bios Release Date = 2013-08-20T00:00:00
2015-02-06 11:24:26:357
920 b64
Report * Bios Sku Number = S Series
2015-02-06 11:24:26:357
920 b64
Report * Bios Vendor = American Megatrends Inc.
2015-02-06 11:24:26:357
920 b64
Report * Bios Family = Server
2015-02-06 11:24:26:357
920 b64
Report * Bios Major Release = 4
2015-02-06 11:24:26:357
920 b64
Report * Bios Minor Release = 6
2015-02-06 11:24:26:357
920 b64
Report * Locale ID = 1033
2015-02-06 11:24:26:357
920 b64
Handler Calculating current update level for this session
[ Omitted data ]
http://support.microsoft.com/?kbid=3000850, timestamp 01d039c57a22c0be
2015-02-06 11:24:28:388
920 b64
Handler Done calculating current update level for this session
2015-02-06 11:24:28:982
920 b64
Agent *** START *** Queueing Finding updates [CallerId = wusa Id = 1]
2015-02-06 11:24:28:982
5048 50
COMAPI <<-- SUBMITTED -- COMAPI: Search [ClientId = wusa]
2015-02-06 11:24:28:982
920 11f4
Agent *** END *** Queueing Finding updates [CallerId = wusa Id = 1]
2015-02-06 11:24:28:982
920 11f4
Agent *************
2015-02-06 11:24:28:982
920 11f4
Agent ** START ** Agent: Finding updates [CallerId = wusa Id = 1]
2015-02-06 11:24:28:982
920 11f4
Agent *********
2015-02-06 11:24:28:982
920 11f4
Agent * Online = Yes; Ignore download priority = No
2015-02-06 11:24:28:982
920 11f4
Agent * Criteria = "DeploymentAction='Installation'"
2015-02-06 11:24:28:982
920 11f4
Agent * ServiceID = {A487AA0F-3E53-4FEE-A784-6171B00254E4} Third party service
2015-02-06 11:24:28:982
920 11f4
Agent * Search Scope = {Machine}
2015-02-06 11:24:28:982
920 11f4
Agent * Caller SID for Applicability: S-1-5-21-3157695610-3447843402-2534478823-500
2015-02-06 11:24:28:982
920 11f4
Agent * RegisterService is set
2015-02-06 11:24:29:185
920 11f4
PT +++++++++++ PT: Synchronizing server updates +++++++++++
2015-02-06 11:24:29:185
920 11f4
PT + Offline serviceId = {A487AA0F-3E53-4FEE-A784-6171B00254E4}
2015-02-06 11:24:29:185
920 11f4
PT WARNING: Cached cookie has expired or new PID is available
2015-02-06 11:24:29:185
920 11f4
Agent Reading cached app categories using lifetime 604800 seconds
2015-02-06 11:24:29:185
920 11f4
Agent Read 0 cached app categories
2015-02-06 11:24:29:185
920 11f4
Agent SyncUpdates adding 0 visited app categories
2015-02-06 11:24:29:294
920 11f4
Agent Reading cached app categories using lifetime 604800 seconds
2015-02-06 11:24:29:294
920 11f4
Agent Read 0 cached app categories
2015-02-06 11:24:29:294
920 11f4
Agent SyncUpdates adding 0 visited app categories
2015-02-06 11:24:29:357
920 11f4
Agent Reading cached app categories using lifetime 604800 seconds
2015-02-06 11:24:29:357
920 11f4
Agent Read 0 cached app categories
2015-02-06 11:24:29:357
920 11f4
Agent SyncUpdates adding 0 visited app categories
2015-02-06 11:24:29:638
920 11f4
Agent Reading cached app categories using lifetime 604800 seconds
2015-02-06 11:24:29:638
920 11f4
Agent Read 0 cached app categories
2015-02-06 11:24:29:638
920 11f4
Agent SyncUpdates adding 0 visited app categories
2015-02-06 11:24:30:013
920 11f4
Agent Reading cached app categories using lifetime 604800 seconds
2015-02-06 11:24:30:013
920 11f4
Agent Read 0 cached app categories
2015-02-06 11:24:30:013
920 11f4
Agent SyncUpdates adding 0 visited app categories
2015-02-06 11:24:30:044
920 11f4
Agent Reading cached app categories using lifetime 604800 seconds
2015-02-06 11:24:30:044
920 11f4
Agent Read 0 cached app categories
2015-02-06 11:24:30:044
920 11f4
Agent SyncUpdates adding 0 visited app categories
2015-02-06 11:24:30:044
920 11f4
PT + SyncUpdates round trips: 5
2015-02-06 11:24:30:076
920 11f4
PT +++++++++++ PT: Synchronizing extended update info +++++++++++
2015-02-06 11:24:30:076
920 11f4
PT + Offline serviceId = {A487AA0F-3E53-4FEE-A784-6171B00254E4}
2015-02-06 11:24:30:138
920 11f4
Agent * Found 0 updates and 54 categories in search; evaluated appl. rules of 126 out of 284 deployed entities
2015-02-06 11:24:30:138
920 11f4
Agent *********
2015-02-06 11:24:30:138
920 11f4
Agent ** END ** Agent: Finding updates [CallerId = wusa Id = 1]
2015-02-06 11:24:30:138
920 11f4
Agent *************
2015-02-06 11:24:30:138
920 11f4
IdleTmr WU operation (CSearchCall::Init ID 1, operation # 17) stopped; does use network; is not at background priority
2015-02-06 11:24:30:138
920 11f4
IdleTmr Decremented idle timer priority operation counter to 1
2015-02-06 11:24:30:154
5048 1428
COMAPI >>-- RESUMED -- COMAPI: Search [ClientId = wusa]
2015-02-06 11:24:30:154
5048 1428
COMAPI - Updates found = 0
2015-02-06 11:24:30:154
5048 1428
COMAPI ---------
2015-02-06 11:24:30:154
5048 1428
COMAPI -- END -- COMAPI: Search [ClientId = wusa]
2015-02-06 11:24:30:154
5048 1428
COMAPI ------------- -
How do you allow SQL Server 2014 Express for remote connection and in firewall?
I'm sorry if this was answered here before.
I installed SQL Server 2014 Express and it is working perfectly. I want my server to be accessed through LAN. It is a named instance.
I searched the internet and here's what i did:
1. Through the SQL Configuration manager, I enabled all the Protocols of my Instance (TCP/IP, Named Pipes and Shared Memory). I changed in the IP Addresses the "IP ALL" TCP Dynamic Ports to 1434.
2. In the Firewall I made an Inbound Rule to allow the Program (%ProgramFiles% (x86)\Microsoft SQL Server\MSSQL12.MyInstance\MSSQL\Binn\sqlservr.exe)
3. I also made 2 Inbound Rules to allow (TCP/IP Port 1433) and (UDP Port 1434).
4. Restarted my instance. SQL Server Browser and SQL Server Reporting Services are also running.
5. No Luck I cant still access the server using a different computer in the network.
Please help.Hello,
In Express Edition by default remote connections are disabled, you have to enable it first:
Configure the remote access Server Configuration Option
It's always a two way communication, so you have to create also outbound rules, not only inbound, and this on server as well as on client side; see
Configure a Windows Firewall for Database Engine Access
Olaf Helper
[ Blog] [ Xing] [ MVP] -
Microsoft SQL Server 2008 Express for SAP BusinessObjects Enterprise 4.0
Hi Expert,
I'm going to install SAP BusinessObjects Enterprise 4.0 on my virtualized system (vmware) composed as: windows server 2008 Enterprise Edition R2 + Tomcat. I have some doubts related to the DB version to choose.
Due to the fact that Microsoft SQL Server 2008 Express is bundled with SAP BOE 4.0 I want to use this DB.
However, I saw in the Microsoft Portal that Microsoft SQL Server 2008 Express (http://www.microsoft.com/sqlserver/en/us/product-info/compare.aspx) that:
Number of CPUs 1
Maximum memory utilized 1 GB
Maximum database size 10 GB
These my doubts:
1) Could these characteristics generate performance issues for a production environment?
2) Which is a typical DB size for a production enviroment? could be greater then 10 GB?
3) Can I use Microsoft SQL Server 2008 Express in a virtualized system (vmware)?
Thanks in advance for collabortion
regards
gio'Hi Gio
Remember that the BOE system database (or repository) only has a few tables in it, with really one main table that stores a reference to each folder, report, user, group, server, etc. on the system. So the table and the database itself do not grow very large. In the past year, we have done over 70 SAP BusinessObjects projects and I can't recall one where the database size would even approach 5GB in total, let alone 10GB.
The reason for this is that the database only stores a reference to the physical objects and content within BOE-- the actual reports, universes, etc. are stored on the file system within the Input and Output file repository folders.
And the memory constraints are not really an issue either with BOE-- the database itself does not come under much strain during the day-to-day operation of the server. If you believe that the memory may be an issue, you can always start with SQL Server 2008 Express and then using the new tools in the 4.0 CMC to monitor the memory usage on the server. If you need to, you can move the system database to another SQL Server edition, or alternately move the database to another one of the supported platforms, including Oracle, DB2, etc.
Hope this helps!
regards
David -
How to run SQL SERVER 2014 EXPRESS ON WINDOWS 8?
I installed SQL SERVER 2014 EXPRESS(132 mb) after that when I check "All programs" I don't see any GUI to use SQL.
I know MySQL and Linux. In MySQL client I can do,
$MySQL -p -u root Password:*****
but in SQL SERVER which client GUI I can use. How do I run queries?
Can anyone give me suggestions to use SQL server. PleasePlease download SQL Server Management Studio Express from the following URL. When installing it finished you can see it in "All Programs" or simply by calling it via Run... using this command:
ssms.exe
Download Microsoft SQL Server 2014 Express
Cheers,
Saeid Hasani
Database Consultant
Please feel free to contact me at [email protected] as well as on Twitter and Facebook.
[My Writings on TechNet Wiki] [T-SQL Blog] [Curah!]
[Twitter] [Facebook] [Email] -
Query used by SQL Server Management Pack for monitoring database backups
I use SCOM 2012 R2 and the SQL Server Management Pack to monitor SQL Server database backups. I believe I am getting false positives. SCOM reports database are not backuped, while in fact they are. So I need to troubleshoot this. I suspect SCOM is querying
the backup history in the msdb database. I want to know which query SCOM uses.
I have tried looking in the monitor's definition but I suspect the query is embedded in the management pack files which are binary. I have also tried running a trace using the SQL Server Profiler on my test environment and overriding the interval to 60 seconds,
but I don't see a relevant query being executed. I also don't see the alert reappear so I suspect SCOM does not honor the interval in a way I would expect.
What query, or other method, does SCOM use to check database backups?
Thanks in advance.Thank you both Ivan and Michael,
I only saw your messages by email and didn't see your screen shot before I extracted the query myself. In my own queries I calculate the backup age in hours instead of days because of daily full backups. Perhaps It will be a good idea to create my own monitors
from scratch like I used to do with Nagios.
I will study the vbscripts and might create my own version which allows the query to be entered as an parameter and move all code to a .Net class which can be called from vbscript as an COM object. This way I hope to reduce the vbscript code to an minimum
while keeping the flexibility of the SCOM Operations Console and the robustness of .Net. I suspect I want to make more non standard monitors in the future.
Regards,
Arjen -
Installation of SQL Server 2012 express on Windows 7
Hi,
When I try to install SQL Server 2012 express, I get the following error message:
This SQL Server Setup media does not Support the language of the OS, or does not have the SQL Server English-language Version Installation Files. Use the matching language-specific SQL-Server Format and System locales through the regional Settings in the
Control Panel.
I tried changing the language via the Control Panel but it didn't help.
What should I do?Hello,
Please, you need to match the following operating system settings to the language of SQL Server (US English):
(1) operating system user interface setting, (2) the operating system user locale setting and (3) the system locale setting.
https://msdn.microsoft.com/en-us/library/ee210665(v=sql.110)
Hope this helps.
Regards,
Alberto Morillo
SQLCoffee.com
Hi Matt,
Did you follow Alberto's suggestion? and it resolve your issues? -
Installing SQL Server 2008 Express on windows 2000 server ?
Is is possible to install SQL Express 2008 on a Windows 2000 machine. Has anybody come across any issues doing this. any advice would appreciated.
Thanks in advance
Jayce.Hi Jayce,
The web page "Hardware and Software Requirements for Installing SQL Server 2008 R2" does not list Windows 2000 as a compatability option as follows; -
http://msdn.microsoft.com/en-us/library/ms143506.aspx#Express32
The earliest desktop operating system listed is Windows XP.
So I understand you can't successfully install SQL Express 2008 on a Windows 2000 machine.
Kind Regards,
Kieran.
If you have found any of my posts helpful then please vote them as helpful. Kieran Wood PGD SoftDev (Open), MBCS http://uk.linkedin.com/in/bileeds -
Microsoft SQL Server 2008 Express for SAP BO BI 4.0
Dear Experts,
I am curently installing a SAP BO BI 4.0 with the bundle database, and after watching the thread 10610337 and http://www.microsoft.com/sqlserver/en/us/product-info/compare.aspx I am wondering if the SQL server express is sufficient for a usage of BI .(we will also add on this instance the Data Services)
I don't know how the data are stored (is that like BW ?) and if it will need a large disk space ?
According to your experience, are the 10 Gb database space of SQL express are ok for a development environment ?
Best Regards,
Thibaud.The bundled DB with BI4.0 is provided as a sample and as a means to quickly deploy product.
You should use your company standard DB solution for any serious BI4.0 deployment.
The bundled DB should be enough for Development or test/sandbox type of deployments.
As to the required size - it depends on what and how exactly you're going to use it - without a proper Sizing exersize it is impossible to say.
see sizing section on SMP for more details on that.
Maybe you are looking for
-
New Airport Extreme Base Station will only talk to one MacBook
Thanks for any help you can give. I set up my new AEBS yesterday with my Core 2 Duo Macbook with the installer CD and the updater applied. It set up flawlessly, and once I deleted and reinstalled the USB printer that worked too. My wife's Macbook Cor
-
I'm probably going to purchase a MacBook and I want to connect it to my HD plasma but i've only got hdmi ports or an RGB port (Which my mini runs through) anyway to connect a MacBook to HDMI i need: Apple Mini-DVI to DVI Adapter: http://store.apple.c
-
Upgrading from Office 2010 to 365
Upgrading from Office 2010 Pro to 365 Pro Plus - I know you must uninstall 2010 and install 365 or can run them concurrently. Question is - if you uninstall 2010 and install 365, what settings are lost and what settings are retained? Outlook signatur
-
Define a Web service in XI 7.1
How can I define a web service in PI 7.1 in SOAP adapter Thanks
-
Nokia 9500 error message when trying to navigate
Hey people, when I try an navigate ANY pdf file I get an error message 'CONE 14'and the application closes Everything works fine other than that feature,which as a major feature is a bit of a drawback. I have formatted the phone and tried fresh insta