SQL Server service not starting
Hi,
In my environment we have configured SQL server clustering. Currently we are getting the following error and the service is not starting up.
ERROR: TDSSNIClient initialization failed with error 0x2741, status code 0x1.
Hi winoa,
According to your description, you come across the error that TDSSNIClient initialization failed with error 0x2741. Please help to post the full error message from both SQL Server error log and cluster log for further analysis.
Based on my research, this issue could happen due to setting up SQL Server failover cluster over different subnets using these three SQL Server versions(SQL Server 2005, SQL Server 2008, or SQL Server 2008 r2), hardware issue, or that disk and network name
are offline.
Please pay attention to the points below to troubleshoot your issue.
•If you set up SQL Server failover cluster over multiple subnets using the versions of SQL Server 2005, SQL Server 2008 or SQL Server 2008 r2, please make all the nodes in the same subnet, since SQL Server multi-subnet failover cluster is not supported among
those three versions of SQL Server. If possible, you could use the later versions (SQL Server 2012 or 2014) for SQL Server multi-subnet failover cluster.
• Make sure that disk and network name are online.
Regards,
Michelle Li
Similar Messages
-
Sql Server Agent not starting automatically in failover in a clustered environment.
Hi,
We are running Sql Server 2008 R2 as a 2 node cluster in Windows 2008 R2
server. In the Sql Server Configuration manager we find that service of
the Sql Server(database engine) as got a start mode as manual being
an instance in the 2 node cluster. When the node in which the service is
running fails the the Sql Server service gets started in the other node. However
we find that the Sql Server Agent service(whose start mode is also in manual)
does not get started automatically in the other node along with the Sql Server
service.Why does the cluster service do not start Sql Server agent service as well.
Should we make the Sql Server agent service start mode to be automatic
instead of being manual as it is now? Thanking you in advance
Binny MathewFolks - the startup type of all clustered services should be set to manual - when you virtualize SQL Services, they are put in manual startup mode and this should not be changed. It is the cluster manager which starts the SQL and SQLAgent when a
failover happens (SQL does not start SQLAgent). If your SQLAgent doesn't start after a cluster failover, check the SQLAgent logs to see what the root cause of the problem is and rectify it. You should not change the startup type to "Automatic" -
leave it as manual
Satish Kartan www.sqlfood.com
I suspect that your clustered SQLAgent resource is currently NOT dependent on SQL resource. If not, make SQLAgent dependent on SQL resource, which will coerce SQLAgent to wait for the SQL resource to come online before it brings itselft (SQLAgent) resource
online, when a failover happens.
Satish Kartan www.sqlfood.com -
EPMA server service not started
Hi All,
I installed Hyperion 11.1.2.2 Essbase, Planning, EPMA, Calculation Manager, FDM and HFM in the single machine in windows server 2008 R2.
but i am facing two issues.
1. In services, EPMA Server service not started.
2. In FDM, I am getting error in connecting to Essbase.
Error: Unable to retrieve target system data.
Is any thing, i have to install additionally?
Regards,
madyHi,
In Windows Event Viewer i got this message.
Log Name: System
Source: Service Control Manager
Date: 9/3/2012 12:46:12 AM
Event ID: 7011
Task Category: None
Level: Error
Keywords: Classic
User: N/A
Computer: hyperionepm
Description:
A timeout (30000 milliseconds) was reached while waiting for a transaction response from the Parallels Tools Service service.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Service Control Manager" Guid="{555908d1-a6d7-4695-8e1e-26931d2012f4}" EventSourceName="Service Control Manager" />
<EventID Qualifiers="49152">7011</EventID>
<Version>0</Version>
<Level>2</Level>
<Task>0</Task>
<Opcode>0</Opcode>
<Keywords>0x8080000000000000</Keywords>
<TimeCreated SystemTime="2012-09-03T07:46:12.612304600Z" />
<EventRecordID>70587</EventRecordID>
<Correlation />
<Execution ProcessID="440" ThreadID="16540" />
<Channel>System</Channel>
<Computer>hyperionepm</Computer>
<Security />
</System>
<EventData>
<Data Name="param1">30000</Data>
<Data Name="param2">Parallels Tools Service</Data>
</EventData>
</Event> -
SQL Server service not automatically starting (logon failure)
I just installed SQL Server 2012 on a machine. To run "SQL Server" as well as "SQL Server Agent" service I have created a domain account called SQLADMIN. This account is a service account and has no other rights like logon locally or
local administrator.
When the machine restarts, "SQL Server" service doesn't start automatically. When I click Start then it says "Logon Failure". Now if I simply enter the password again under tab "Log On" and then start service then it starts. Why
doesn't it start automatically?Hello,
Please read the following article about permissions required by service accounts.
http://msdn.microsoft.com/en-us/library/ms143504(v=sql.110).aspx#Serv_Perm
Hope this helps.
Regards,
Alberto Morillo
SQLCoffee.com
I do not see any special permission that is needed as per the article. For e.g. as per below:
SQL Server Service
Permissions granted by SQL Server Setup
SQL Server Database Engine:
(All rights are granted to the per-service SID. Default instance: NT SERVICE\MSSQLSERVER. Named instance: NT SERVICE\MSSQL$InstanceName.)
Log on as a service (SeServiceLogonRight)
Replace a process-level token(SeAssignPrimaryTokenPrivilege)
Bypass traverse checking (SeChangeNotifyPrivilege)
Adjust memory quotas for a process(SeIncreaseQuotaPrivilege)
Permission to start SQL Writer
Permission to read the Event Log service
Permission to read the Remote Procedure Call service
I am running Database Engine service as DOMAIN\SQLADMIN account which can Log On As A Service. Other 3 permissions mentioned in article are not given so let me assign it and then see how it goes.
Could this issue be due to some domain policy? Because there is another SQL Server machine which shows same behaviour. -
Sql server service will not start after server reboot:
2009-08-13 14:15:43.94 spid7s SQL Trace ID 1 was started by login "sa".
2009-08-13 14:15:43.97 spid7s Starting up database 'mssqlsystemresource'.
2009-08-13 14:15:43.97 spid7s The resource database build version is 10.00.1600. This is an informational message only. No user action is required.
2009-08-13 14:15:44.30 Server A self-generated certificate was successfully loaded for encryption.
2009-08-13 14:15:44.30 spid7s Server name is 'WIN-37R9WFWAJIB\MSDB1'. This is an informational message only. No user action is required.
2009-08-13 14:15:44.32 spid10s Starting up database 'model'.
2009-08-13 14:15:44.32 Server Server is listening on [ 'any' <ipv6> 49167].
2009-08-13 14:15:44.33 Server Server is listening on [ 'any' <ipv4> 49167].
2009-08-13 14:15:44.33 Server Server local connection provider is ready to accept connection on [ \\.\pipe\SQLLocal\MSDB1 ].
2009-08-13 14:15:44.33 Server Server named pipe provider is ready to accept connection on [ \\.\pipe\sql\query ].
2009-08-13 14:15:44.35 spid10s The database 'model' is marked RESTORING and is in a state that does not allow recovery to be run.
2009-08-13 14:15:44.38 Server Server is listening on [ ::1 <ipv6> 49168].
2009-08-13 14:15:44.38 Server Server is listening on [ 127.0.0.1 <ipv4> 49168].
2009-08-13 14:15:44.38 Server Dedicated admin connection support was established for listening locally on port 49168.
2009-08-13 14:15:44.39 spid10s Error: 927, Severity: 14, State: 2.
2009-08-13 14:15:44.39 spid10s Database 'model' cannot be opened. It is in the middle of a restore.
2009-08-13 14:15:44.49 spid10s Could not create tempdb. You may not have enough disk space available. Free additional disk space by deleting other files on the tempdb drive and then restart SQL Server. Check for additional errors in the event log that may indicate why the tempdb files could not be initialized.
2009-08-13 14:15:44.50 spid10s SQL Trace was stopped due to server shutdown. Trace ID = '1'. This is an informa
there is plenty of room on the server, so i dont think its a disk space issue. i am able to start the service as such:
C:\Users\Administrator>net start MSSQL$MSDB1 /c /m /T3608
The SQL Server (MSDB1) service is starting.
The SQL Server (MSDB1) service was started successfully
sqlcmd -e
1> select name, status from sysdatabases;
2> go
select name, status from sysdatabases;
name
status
master
65544
tempdb
65544
model
65568
msdb
1073807368
SS_DBA_Dashboard
1073807368
(5 rows affected)
model is in RESTORING state and I dont know how to fix it. I am running simple backups, so I have a somewhat recent backup of model.bak but when I attempt to restore it I get an error:
1> restore database model
2> go
restore database model
Msg 3112, Level 16, State 1, Server WIN-37R9WFWAJIB\MSDB1, Line 1
Cannot restore any database other than master when the server is in single user
mode.
Msg 3013, Level 16, State 1, Server WIN-37R9WFWAJIB\MSDB1, Line 1
RESTORE DATABASE is terminating abnormally.
other forums suggest manually updating the status column but i dont know if my syntax is wrong or it just cant be done in sql server 2008:
1> begin transaction
2> update sysdatabases set status=16 where name='model'
3> ;
4> go
begin transaction
update sysdatabases set status=16 where name='model'
Msg 4406, Level 16, State 1, Server WIN-37R9WFWAJIB\MSDB1, Line 2
Update or insert of view or function 'sysdatabases' failed because it contains a
derived or constant field.
1>
yet another forum suggested taking a cleanly shut down model.mdf and model.ldf from another sql server 2008 instance and placing those in the data directory while moving the 'restoring' ones to a backup location. this didnt work either. any help is appreciated im new to sql server and this is very frustrating! thanks in advance!I have the same issue on SQL Server 2008R2, after a server reboot, but none of the NET START commands or command line attempts are successful to start the Service.
NET START command results in "Access Denied" "System Error 5" and the Command line attempts result in
Server Error: 17058, Severity: 16, State: 1.
Server initerrlog: Could not open error log file ''.
Any help?
SQL Error log file:
2011-03-29 16:50:49.40 Server (c) Microsoft Corporation.
2011-03-29 16:50:49.40 Server All rights reserved.
2011-03-29 16:50:49.40 Server Server process ID is 7292.
2011-03-29 16:50:49.40 Server System Manufacturer: 'Dell Inc.', System Model: 'PowerEdge T710'.
2011-03-29 16:50:49.40 Server Authentication mode is MIXED.
2011-03-29 16:50:49.40 Server Logging SQL Server messages in file 'E:\MSSQL\MSSQL10_50.MSSQLSERVER\MSSQL\Log\ERRORLOG'.
2011-03-29 16:50:49.40 Server This instance of SQL Server last reported using a process ID of 7448 at 3/29/2011 4:30:06 PM (local) 3/29/2011 8:30:06 PM (UTC). This is an informational message only; no user action is required.
2011-03-29 16:50:49.40 Server Registry startup parameters:
-d E:\MSSQL\MSSQL10_50.MSSQLSERVER\MSSQL\DATA\master.mdf
-e E:\MSSQL\MSSQL10_50.MSSQLSERVER\MSSQL\Log\ERRORLOG
-l E:\MSSQL\MSSQL10_50.MSSQLSERVER\MSSQL\DATA\mastlog.ldf
-T 4616
2011-03-29 16:50:49.42 Server SQL Server is starting at normal priority base (=7). This is an informational message only. No user action is required.
2011-03-29 16:50:49.42 Server Detected 24 CPUs. This is an informational message; no user action is required.
2011-03-29 16:50:49.84 Server Using dynamic lock allocation. Initial allocation of 2500 Lock blocks and 5000 Lock Owner blocks per node. This is an informational message only. No user action is required.
2011-03-29 16:50:49.84 Server Lock partitioning is enabled. This is an informational message only. No user action is required.
2011-03-29 16:50:49.86 Server Node configuration: node 0: CPU mask: 0x0000000000fff000:0 Active CPU mask: 0x0000000000fff000:0. This message provides a description of the NUMA configuration for this computer. This is an informational
message only. No user action is required.
2011-03-29 16:50:49.86 Server Node configuration: node 1: CPU mask: 0x0000000000000fff:0 Active CPU mask: 0x0000000000000fff:0. This message provides a description of the NUMA configuration for this computer. This is an informational
message only. No user action is required.
2011-03-29 16:50:49.89 spid9s Starting up database 'master'.
2011-03-29 16:50:49.95 spid9s CHECKDB for database 'master' finished without errors on 2011-03-18 08:46:34.257 (local time). This is an informational message only; no user action is required.
2011-03-29 16:50:49.95 spid9s FILESTREAM: effective level = 0, configured level = 0, file system access share name = 'MSSQLSERVER'.
2011-03-29 16:50:49.97 spid9s SQL Trace ID 1 was started by login "sa".
2011-03-29 16:50:49.97 spid9s Starting up database 'mssqlsystemresource'.
2011-03-29 16:50:49.99 spid9s The resource database build version is 10.50.1600. This is an informational message only. No user action is required.
2011-03-29 16:50:50.20 spid13s Starting up database 'model'.
2011-03-29 16:50:50.20 spid9s Server name is 'XXXX'. This is an informational message only. No user action is required.
2011-03-29 16:50:50.21 Server The certificate [Cert Hash(sha1) "C41DC20703F049763778AC2842C3C8A3A2C6EED4"] was successfully loaded for encryption.
2011-03-29 16:50:50.21 Server Server is listening on [ 'any' <ipv6> 1433].
2011-03-29 16:50:50.21 Server Server is listening on [ 'any' <ipv4> 1433].
2011-03-29 16:50:50.21 Server Server local connection provider is ready to accept connection on [
\\.\pipe\SQLLocal\MSSQLSERVER ].
2011-03-29 16:50:50.21 Server Server named pipe provider is ready to accept connection on [
\\.\pipe\sql\query ].
2011-03-29 16:50:50.21 Server Server is listening on [ ::1 <ipv6> 1434].
2011-03-29 16:50:50.21 spid13s The database 'model' is marked RESTORING and is in a state that does not allow recovery to be run.
2011-03-29 16:50:50.21 Server Server is listening on [ 127.0.0.1 <ipv4> 1434].
2011-03-29 16:50:50.21 spid13s Error: 927, Severity: 14, State: 2.
2011-03-29 16:50:50.21 spid13s Database 'model' cannot be opened. It is in the middle of a restore.
2011-03-29 16:50:50.21 Server Dedicated admin connection support was established for listening locally on port 1434.
2011-03-29 16:50:50.22 spid13s Could not create tempdb. You may not have enough disk space available. Free additional disk space by deleting other files on the tempdb drive and then restart SQL Server. Check for additional errors in
the event log that may indicate why the tempdb files could not be initialized.
2011-03-29 16:50:50.22 spid13s SQL Trace was stopped due to server shutdown. Trace ID = '1'. This is an informational message only; no user action is required. -
Sql server service wont start after disabling TLS 1.0 and SSL 3.0 on windows
We have been hardening our servers for some time now and recently we disabled SSL 3.0 because of the poodle attack. When I did this on one of our test servers SQL Server failed to start up after the restart.
I have been able to reproduce this on Windows Server 2012 and Windows 7 by disabling TLS 1.0 and SSL 3.0 through the registry. I am using SQL Server 2012 on the server machine. On my windows 7 machine sql server 2012 and sql server 2005 will not start with
those disabled.
These are the event log errors I get:
Application Logs:
(28/10/2014 8:38:54 AM) SQL Server could not spawn FRunCM thread. Check the SQL Server error log and the Windows event logs for information about possible related problems.
(28/10/2014 8:38:54 AM) Could not start the network library because of an internal error in the network library. To determine the cause, review the errors immediately preceding this one in the error log.
(28/10/2014 8:38:54 AM) TDSSNIClient initialization failed with error 0x80090331, status code 0x1.
(28/10/2014 8:38:54 AM) TDSSNIClient initialization failed with error 0x80090331, status code 0x80.
System Logs:
(28/10/2014 8:38:54 AM) The SQL Server (MSSQLSERVER) service terminated with service-specific error %%-2146893007.
(28/10/2014 8:38:54 AM) A fatal error occurred while creating an SSL server credential. The internal error state is 10013.
Done anyone know have we can keep SSL 3.0 and TLS 1.0 disabled and get SQLServer server to start?Hi Don,
I already have TLS 1.0 Disabled to prevent the BEAST exploit. So the values I have for:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\Protocols\TLS
1.0\Server
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\Protocols\TLS
1.0\Client
Both have enabled set to ("Enabled"=dword:00000000).
If change both of these back to ("Enabled"=dword:00000001)
to enable TLS 1.0, and restart then SQLServer is able to start again. But we are now vulnerable to the BEAST attack once again.
If I keep server enabled and disable the client or vice versa and restart. Then SQLServer starts but I
am unable to connect to it. When I check the Event logs I get the same errors as my original past.
With your last post, do you mean to backup SCHANNEL and delete it so it gets recreated? If that is the case it will probably work because if I re enable SSL 3.0 or TLS 1.0 from here it fix's the issue, but I then I won't have the exploits patched and
we need this for some of our customers.
This is my SCHANNEL Export:
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\Protocols]
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\Protocols\SSL 2.0]
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\Protocols\SSL 2.0\Client]
"DisabledByDefault"=dword:00000001
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\Protocols\SSL 3.0]
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\Protocols\SSL 3.0\Client]
"DisabledByDefault"=dword:00000001
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\Protocols\SSL 3.0\Server]
"Enabled"=dword:00000000
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\Protocols\TLS 1.0]
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\Protocols\TLS 1.0\Client]
"Enabled"=dword:00000000
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\Protocols\TLS 1.0\Server]
"Enabled"=dword:00000000 -
Sql reporting service not start
when i try to start the service sql server reporting services(SQLEXPRESS2) then it shows me
"The Sql Server Reporting Sservices on Local Computer started and then stopped.Some services stop automatically if they are not in use by other services or programs"
how to solve this /.
please helpplease anyone can help me
-
Report server service not starting up in report 6i
I am trying to start report server service in windows 2000 server but it is not starting
up with following error in event viewer.
The Oracle Reports Server [arun] service terminated with service-specific error 186.
Any clue.This error generally means there is a problem in the tnsnames.ora file. You are probably missing the needed entry for the Reports Server or the Reports Server name you are using contains special characters.
More details can be found in Metalink Doc ID# 223807.1 -
I installed sql server 2008 r2 sp2
sql server agent is not allowing me to start it.
I run SSCM right click agent but start,stop menus are disabledi have only one sql instance named SQLEXPRESS
The SQL Server Agent is installed with the Express Edition of SQL Server, but it's not a Feature of the Express Edition, therefore you can't start the Agent.
See
Features Supported by the Editions of SQL Server 2014
Olaf Helper
[ Blog] [ Xing] [ MVP] -
Oracle Management Server Service not starting
OS: windows 2000 Server
Ora version: 8.1.7
I have checked all the services are started and database is up but when i am trying to start OMS service "oemctrl start oms" its giving the message..
... service could not be started
... the service did not return an error.
please tell me whats the solution.I have this problem too. (posted a separate thread on
this before I read this one, sorry).
Here is my oms.nohup:
E:\oracle\ora81\sysman\log>tail -f oms.nohup
[main][2003-10-9:18:7:57:599] ORA-01017: invalid
username/password; logon denie
d
: ..../....@jdbc:oracle:oci8:@exorabsp
[main][2003-10-9:18:7:57:599]
VdbSession.processError: invalid connect string
VXA-2018 :
Anmeldung bei OMS-Registrierungsdienst nicht m�glich
oracle.sysman.vxn.VxnBootstrapException:
at
at
at
t
oracle.sysman.vxa.VxaAppServer.startServices(VxaAppSer
er.java:1353)
at
at
at
t
oracle.sysman.vxa.VxaAppServer.main(VxaAppServer.java:
547)
Fehler beim Hochfahren von Oracle Management Server.
Somehow, by reading the responses here - created new repository - I managed to get OMS working again. -
Lync Edge Server Service Not Starting
i am having an issue with starting the "Lync Server Audio/Video Edge" service on my lync edge server. when i try to start the service it throws the following error..
"The Lync server audio/video edge service on local computer started and than stopped. some services stop automatically if they are not in use by other services or programs."
than in the event viewer logs there are 2 specific errors i can see that look like the following..
what is stopping me from fixing this right away is that i havent changed anything in my configuration, seems to have broke on its own. i can post more errors i have found in other places as well if needed. any help is greatly appreciatedhey sean, thanks for your response. all things point to something else using port 443 right now.. however from what i can see from a netstat command it doesnt look like anything new is running on it. here is a copy/paste of my most recent netstat command..
Active Connections
Proto Local Address Foreign Address State PID
TCP 0.0.0.0:80 0.0.0.0:0 LISTENING 4
TCP 0.0.0.0:135 0.0.0.0:0 LISTENING 756
TCP 0.0.0.0:443 0.0.0.0:0 LISTENING 4
TCP 0.0.0.0:445 0.0.0.0:0 LISTENING 4
TCP 0.0.0.0:3389 0.0.0.0:0 LISTENING 2804
TCP 0.0.0.0:4443 0.0.0.0:0 LISTENING 4
TCP 0.0.0.0:47001 0.0.0.0:0 LISTENING 4
TCP 0.0.0.0:49152 0.0.0.0:0 LISTENING 468
TCP 0.0.0.0:49153 0.0.0.0:0 LISTENING 844
TCP 0.0.0.0:49154 0.0.0.0:0 LISTENING 896
TCP 0.0.0.0:49338 0.0.0.0:0 LISTENING 1400
TCP 0.0.0.0:56483 0.0.0.0:0 LISTENING 572
TCP 0.0.0.0:56966 0.0.0.0:0 LISTENING 564
TCP 0.0.0.0:56967 0.0.0.0:0 LISTENING 2824
TCP 192.100.100.84:139 0.0.0.0:0 LISTENING 4
TCP 192.100.100.84:444 0.0.0.0:0 LISTENING 1768
TCP 192.100.100.84:5061 0.0.0.0:0 LISTENING 1908
TCP 192.100.100.84:5061 68.34.170.246:52296 CLOSE_WAIT 1908
TCP 192.100.100.84:5061 68.34.170.246:52297 CLOSE_WAIT 1908
TCP 192.100.100.84:5061 68.34.170.246:53570 CLOSE_WAIT 1908
TCP 192.100.100.85:5061 0.0.0.0:0 LISTENING 1908
TCP 192.100.100.85:5062 0.0.0.0:0 LISTENING 1844
TCP 192.100.100.85:5062 192.100.100.83:53701 ESTABLISHED 1844
TCP 192.100.100.85:5062 192.100.100.83:53967 ESTABLISHED 1844
TCP 192.100.100.85:8057 0.0.0.0:0 LISTENING 1768
TCP 192.100.100.85:8057 192.100.100.83:56612 ESTABLISHED 1768
TCP 192.100.100.85:8057 192.100.100.83:56617 ESTABLISHED 1768
TCP 192.100.100.85:8057 192.100.100.83:56618 ESTABLISHED 1768
TCP 192.100.100.85:8057 192.100.100.83:56619 ESTABLISHED 1768
TCP 192.100.100.85:8057 192.100.100.83:56620 ESTABLISHED 1768
TCP 192.100.100.85:8057 192.100.100.83:56628 ESTABLISHED 1768
TCP 192.100.100.85:8057 192.100.100.83:56629 ESTABLISHED 1768
TCP 192.100.100.85:8057 192.100.100.83:56670 ESTABLISHED 1768
TCP 192.100.100.85:57577 192.100.100.146:5357 TIME_WAIT 0
TCP 192.100.100.85:57579 192.100.100.175:5357 TIME_WAIT 0
TCP 192.100.100.85:57583 192.100.100.159:5357 TIME_WAIT 0
TCP 192.100.100.85:57584 192.100.100.147:5357 TIME_WAIT 0
TCP 192.100.100.85:57585 192.100.100.242:3911 TIME_WAIT 0
TCP [::]:80 [::]:0 LISTENING
4
TCP [::]:135 [::]:0 LISTENING
756
TCP [::]:443 [::]:0 LISTENING
4
TCP [::]:445 [::]:0 LISTENING
4
TCP [::]:3389 [::]:0 LISTENING
2804
TCP [::]:4443 [::]:0 LISTENING
4
TCP [::]:47001 [::]:0 LISTENING
4
TCP [::]:49152 [::]:0 LISTENING
468
TCP [::]:49153 [::]:0 LISTENING
844
TCP [::]:49154 [::]:0 LISTENING
896
TCP [::]:49338 [::]:0 LISTENING
1400
TCP [::]:56483 [::]:0 LISTENING
572
TCP [::]:56966 [::]:0 LISTENING
564
TCP [::]:56967 [::]:0 LISTENING
2824
TCP [2002:c064:6454::c064:6454]:4443 [2002:c064:6453::c064:6453]:54033 ESTABLISHED 4
TCP [2002:c064:6454::c064:6454]:57581 [2002:c064:64ab::c064:64ab]:445 ESTABLISHED 4
TCP [2002:c064:6454::c064:6454]:59957 [2002:c064:640c::c064:640c]:445 ESTABLISHED 4
UDP 0.0.0.0:123 *:*
948
UDP 0.0.0.0:500 *:*
896
UDP 0.0.0.0:1434 *:*
1976
UDP 0.0.0.0:4500 *:*
896
UDP 0.0.0.0:5355 *:*
140
UDP 127.0.0.1:51664 *:*
1172
UDP 127.0.0.1:56155 *:*
2924
UDP 127.0.0.1:59005 *:*
964
UDP 127.0.0.1:62503 *:*
1680
UDP 127.0.0.1:62786 *:*
572
UDP 127.0.0.1:62788 *:*
140
UDP 127.0.0.1:64531 *:*
896
UDP 127.0.0.1:65160 *:*
1844
UDP 192.100.100.84:137 *:*
4
UDP 192.100.100.84:138 *:*
4
UDP [::]:123 *:*
948
UDP [::]:500 *:*
896
UDP [::]:1434 *:*
1976
UDP [::]:4500 *:*
896
UDP [::]:5355 *:*
140 -
EPMA Server service not starting 11.1.2.2
Service cannot be started. Hyperion.DimensionServer.Interface.Exceptions.EPMAServiceException: Cannot initialize the Session Manager. ---> System.Reflection.TargetInvocationException: Exception has been thrown by the target of an invocation. ---> System.TypeInitializationException: The type initializer for 'Oracle.DataAccess.Client.OracleClientFactory' threw an exception. ---> Oracle.DataAccess.Client.OracleException The provider is not compatible with the version of Oracle client at Oracle.DataAccess.Client.OracleInit.Initialize() --- End of inner exception stack trace --- --- End of inner exception stack trace --- at System.RuntimeFieldHandle.GetValue(Object instance, RuntimeTypeHandle fieldType, RuntimeTypeHandle declaringType, Boolean& domainInitialized) at System.Reflection.RtFieldInfo.InternalGetValue(Object obj, Boolean doVisibilityCheck, Boolean doCheckConsistency) at System.Reflection.RtFieldInfo.GetValue(Object obj) at System.Data.Common.DbProviderFactories.GetFactory(DataRow providerRow
Please can some one help me?You can check the following documents on Oracle support and see if that helps. Seems like the issue is with incompatible version of Provider from the exception --
1001037 wrote:
Oracle.DataAccess.Client.OracleException The provider is not compatible with the version of Oracle client at Oracle.DataAccess.Client.OracleInit.Initialize()
You can check the following documents on Oracle support -
UPK: "Oracle.DataAccess.Client.OracleException: The provider is not compatible with the version of Oracle Client" DatabaseUpdater Error [ID 1540625.1]
or
TROUBLESHOOTING ODP.NET error "The Provider Is Not Compatible With The Version Of Oracle Client" after applying 10.2.0.3 [ID 433459.1]
Thanks,
hyperionEPM
Please mark answers as helpful or correct for others to find them easily. -
SQL Server Service won't start on SQL Server 2008
Hi everyone,
I'm having trouble starting SQL Server service after stopping and starting the service. Before this happened, I created a Stored Procedure for marking all tables at once along with a maintenance plan for differential backup on all my databases based on the
recommendation from this link, http://msdn.microsoft.com/en-us/library/ms253070.aspx.
When I realized that the differential backup failed with some databases displaying (Restoring...) post-fix to the database name, I decided to stop SQL Server service and start it up. That is when I won't be able to start the service again.
Is there a fix for starting the SQL Server service? Any help is very much appreciated.
Additional information:
- With administrator permission granted.
- Service Pack 1 for SQL Server 2008 installed.
- Using default database instance.
- Tried C:\Program Files\Microsoft SQL Server\MSSQL.....\Binn>net start MSSQLSERVER /T3608 ( return msg: System error 5 has occurred. Access is denied.
- When I start SQL Server service, I keep getting this dialog msg:
"Windowns could not start the SQL Server (MSSQLSERVER) on Local Computer. For more information, review the System Event Log. If this is a non-Microsoft service, contact the service vendor, and refer to service-specific error code 1814."
The event log does not explain or provide any hint on how to fix the problem.
- Log msg:
2010-07-22 10:30:25.09 Server (c) 2005 Microsoft Corporation.
2010-07-22 10:30:25.09 Server All rights reserved.
2010-07-22 10:30:25.09 Server Server process ID is 6076.
2010-07-22 10:30:25.10 Server Authentication mode is MIXED.
2010-07-22 10:30:25.10 Server Logging SQL Server messages in file 'C:\Program Files\Microsoft SQL Server\MSSQL10.MSSQLSERVER\MSSQL\Log\ERRORLOG'.
2010-07-22 10:30:25.11 Server This instance of SQL Server last reported using a process ID of 5708 at 7/21/2010 3:27:01 PM (local) 7/21/2010 10:27:01 PM (UTC). This is an informational message only; no user action is required.
2010-07-22 10:30:25.11 Server Registry startup parameters:
-d C:\Program Files\Microsoft SQL Server\MSSQL10.MSSQLSERVER\MSSQL\DATA\master.mdf
-e C:\Program Files\Microsoft SQL Server\MSSQL10.MSSQLSERVER\MSSQL\Log\ERRORLOG
-l C:\Program Files\Microsoft SQL Server\MSSQL10.MSSQLSERVER\MSSQL\DATA\mastlog.ldf
2010-07-22 10:30:25.14 Server SQL Server is starting at normal priority base (=7). This is an informational message only. No user action is required.
2010-07-22 10:30:25.14 Server Detected 4 CPUs. This is an informational message; no user action is required.
2010-07-22 10:30:25.23 Server Using locked pages for buffer pool.
2010-07-22 10:30:25.43 Server Using dynamic lock allocation. Initial allocation of 2500 Lock blocks and 5000 Lock Owner blocks per node. This is an informational message only. No user action is required.
2010-07-22 10:30:25.73 Server Node configuration: node 0: CPU mask: 0x000000000000000f Active CPU mask: 0x000000000000000f. This message provides a description of the NUMA configuration for this computer. This is an informational
message only. No user action is required.
2010-07-22 10:30:25.81 spid7s Starting up database 'master'.
2010-07-22 10:30:26.14 spid7s CHECKDB for database 'master' finished without errors on 2010-07-19 21:15:02.823 (local time). This is an informational message only; no user action is required.
2010-07-22 10:30:26.18 spid7s Resource governor reconfiguration succeeded.
2010-07-22 10:30:26.18 spid7s SQL Server Audit is starting the audits. This is an informational message. No user action is required.
2010-07-22 10:30:26.18 spid7s SQL Server Audit has started the audits. This is an informational message. No user action is required.
2010-07-22 10:30:26.19 spid7s FILESTREAM: effective level = 0, configured level = 0, file system access share name = 'MSSQLSERVER'.
2010-07-22 10:30:26.28 spid7s SQL Trace ID 1 was started by login "sa".
2010-07-22 10:30:26.29 spid7s Starting up database 'mssqlsystemresource'.
2010-07-22 10:30:26.31 spid7s The resource database build version is 10.00.2531. This is an informational message only. No user action is required.
2010-07-22 10:30:26.43 spid10s Starting up database 'model'.
2010-07-22 10:30:26.43 spid7s Server name is 'XXXXXXXXXXXXXX'. This is an informational message only. No user action is required.
2010-07-22 10:30:26.47 spid10s The database 'model' is marked RESTORING and is in a state that does not allow recovery to be run.
2010-07-22 10:30:26.47 spid10s Error: 927, Severity: 14, State: 2.
2010-07-22 10:30:26.47 spid10s Database 'model' cannot be opened. It is in the middle of a restore.
2010-07-22 10:30:26.59 spid10s Could not create tempdb. You may not have enough disk space available. Free additional disk space by deleting other files on the tempdb drive and then restart SQL Server. Check for additional errors in
the event log that may indicate why the tempdb files could not be initialized.
2010-07-22 10:30:26.59 spid10s SQL Trace was stopped due to server shutdown. Trace ID = '1'. This is an informational message only; no user action is required.Hello,
Could you please copy the model.mdf and modellog.ldf from
C:\Program Files\Microsoft SQL Server\MSSQL10.MSSQLSERVER\MSSQL\Binn\Templates
To
C:\Program Files\Microsoft SQL Server\MSSQL10.MSSQLSERVER\MSSQL\DATA
Rebuilding the system databases you will lose lose logins, jobs, SSIS packages. You may have to restore or attach user databases.
Hope this helps.
Regards,
Alberto Morillo
SQLCoffee.com -
Automatically start SQL Agent service after SQL Server service fails and starts.
Hi!
I have SQL Server 2008 R2 with two main services - SQL Server and SQL Agent.
I'll try to describe my situation. It happens very occasionally, but sometimes SQL Server service terminates unexpectedly. It's my log:
09/13/2013 10:46:21,Service Control Manager,Error,The SQL Server (MSSQLSERVER) service terminated unexpectedly. It has done this 1 time(s). The following corrective action will be taken in 120000 milliseconds: Restart the service.
09/13/2013 10:46:21,,Error,[359] The local host server is not running,,,,
09/13/2013 10:46:22,MSSQLSERVER,Error,The MSSQLSERVER service terminated unexpectedly.,Server,1073760843,,
09/13/2013 10:46:22,,Warning,[139] AutoRestart: Attempting to restart the MSSQLSERVER service (attempt #1)...,,,,
09/13/2013 10:46:27,,Warning,[139] AutoRestart: Attempting to restart the MSSQLSERVER service (attempt #2)...,,,,
09/13/2013 10:46:32,,Warning,[139] AutoRestart: Attempting to restart the MSSQLSERVER service (attempt #3)...,,,,
09/13/2013 10:46:32,,Error,[140] AutoRestart: The MSSQLSERVER service could not be restarted after 3 attempts,,,,
09/13/2013 10:46:32,,Warning,[360] SQLServerAgent initiating shutdown following MSSQLSERVER shutdown,,,,
As you can see, SQL Server service terminates unexpectedly. Then SQL Agent service tries to start SQL Server service. After unsuccessfully attempts to start SQL Server service, SQL Agent service stops itself. I have the option setting in SQL Server
service to start itself after unexpectedly stop within 2 minutes and it is works well. But I have to start my SQL Agent service after this manually. Unfortunately, I can't investigate the reason of my SQL Server stops unexpectedly and in this case I just want
to make the settings to start both of my services SQL Server and SQL Agent automatically after this. How can I set up this? How can I make my SQL Agent service starts after SQL Server service?Hello,
SQL server agent service depends on SQL server service so unless SQL server service comes online agent will not come online so agent is depended on SQL server not the other wise.
Now is your server 2008 R2 patched to latest service pack (SP2).If not please upgrade it to latest SP.Some fixes are there in Sp which will subside this issue.Can you paste output of
select @@version
>>Then SQL Agent service tries to start SQL Server service.No this is not the case
>>Unfortunately, I can't investigate the reason of my SQL Server stops unexpectedly
Did you checked sql server errorlog and windows event log completely.Please do so and paste if you find some more info
Please mark this reply as the answer or vote as helpful, as appropriate, to make it useful for other readers -
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider,
error: 40 - Could not open a connection to SQL Server)An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named
Pipes Provider, error: 40 - Could not open a connection to SQL Server)
Hello,
Make sure your SQL Server service is started.
Make sure TCP\IP and names pipes protocol is enabled
Make sure you have made an exception in firewall for SQL Server connection
Make sure SQL Server browser service is enabled
Make sure you connect with correct name hostname\instance name for named instance,MSSQLSERVER for default instance and Hotname\SQLEXPRESS for express edition.
Please make sure you use port no when connecting to SQL server listeing on different port (hostname\instance ,portno)
http://blogs.msdn.com/sql_protocols/archive/2006/09/30/SQL-Server-2005-Remote-Connectivity-Issue-TroubleShooting.aspx
Hope this helps
Please mark this reply as the answer or vote as helpful, as appropriate, to make it useful for other readers
Maybe you are looking for
-
i am here stuck.. my dir structure is c:\my\xxx\yyy\zzz i have a code ... package xxx.yyy.zzz; class A // some code }i have compiled sucessfully and put the clsss file into c:\my\xxx\yyy\zzz folder. now i want to import it in another class like... pa
-
The problem about multi-thread in java application
i have problem with the multi-thread in java application, i don't know how to stop and restart a thread safely, because the function thread.stop(),thread.suspend() are both deprecated. now what i can only do is making the thread check a flag(true or
-
We can implement the Carousel web part in many ways like content By Query Web Part , jquery (nivo) plugin or content search web part etc. But among these which one is the best way to implement to get best performance of the page? Thanks
-
Hello there.. i am in msn communities where you can have someone look over your hijack..this and that.. anyways..i had Judy hijack for me..and she said to uninstall Java.. well when i went to add and remove programs..there is no remove button.. She t
-
File type check before uploading a file
Right now I have a processing page that uploads a file only of type zip. If you try submitting something other than a zip file, it throws an error. Is it possible to check the file type before uploading? Something like this in pseudo code: if (file t