SQL Server Software ISO, How to find out what is the Edition and Version of the SQL software before starting installation

Hi All-
Before starting installation, I would like to find out What EDITION and VERSION  is the SQL Server Software ISO.
Please note this is not to find out what version is the installed sql server but before the installation: Is there a note or abrv. that describes what kind of Edition and version is the ISO?
Detail explanation is appreciated.
Thanks.
belayzeleka

@Balmukund - Thanks for the input - That one is a nice blog!
But assuming you can`t change the Product Key value (you are not provided that number, as you know it gets populated by itself) can you find out
what implies the corresponding edition? If there is a folder where this reference is store, could you provide the full file path where  this folder is located?
The ideal solution would be a way to find out what the Edition
is befor we start installation.
Thanks!
Also just to add what I came across:
The SQL Server 2012 installation software comes with pretty much all edition in it, that kind of makes it difficult to easily identify what edition is the specific ISO, but when
one downloads from MSDN one must downloads the
right edition either Standard,
Enterprise, etc so that when you install it, it installs whatever edition is downloaded.
The best source would be whoever downloaded the software.
Also, before going too far, you can find out what edition it is being installed right before the setup wizard finishes on the
License Terms page (Microsoft Software License Terms Page) and if the edition is not the one you intended to install, you can cancel it there and everything will be rolled back- no hastle.
belayzeleka

Similar Messages

  • I do not have my software to reboot my computer.  How do I find out what my administration id and password are?

    I do not have the software to reboot my computer.  How do I find out what my administrator ID and password are?

    Hey,
    Do you have access to the internet?
    You might visit Adobe website and download Acrobat pro on your system.
    Then, you can use your serial number for activating the software.
    Regards,
    Anubha

  • How to find out what is using the native heap of a process running a JVM?

    Hello,
    I am not sure where to post this question so I am starting here.
    I am troubleshooting a Java application using some native calls (32 bits Java running on Solaris 10). The size of the process (as reported by prstat) is slowly increasing day after day.
    The size of the 'Java heap' is fixed at the start (-Xms and -Xmx are set to the same value on the command line when launching the Java app) and the GC is workling fine. No memory complaints from the Java side of the application.
    It is the size of the 'native' heap (as reported by 'pmap') that is increasing:
    root@mas01 # pmap 5382
    5382:/apps/java/bin/java -server -Xms207M -Xmx207M -XX:MaxNewSize=24M -XX:N
    00010000 64K r-x-- /apps/jdk1.5.0_19/bin/java
    0002E000 16K rwx-- /apps/jdk1.5.0_19/bin/java
    00032000 3896K rwx-- [ heap ]
    00400000 389120K rwx-- [ heap ]
    18000000 2784K rwx-- [ heap ]
    DCAF4000 48K rw--R [ stack tid=169 ]
    DCBF6000 40K rw--R [ stack tid=161 ]
    DCCF8000 32K rw--R [ stack tid=160 ]
    My first reaction was to search for a memory leak. Found a minor leak in the JVM with the ::findleak function (called within the mdb debugger). Upgraded to a later release of Java 5 (Java 1.5.0_19) where the leak is fixed but the heap is still increasing.
    Many parts of the process allocate memory in the native heap. The JVM itself, the native calls made to a C++ library part of our Java application and maybe also some 3rd party software.
    I would like to know what is the best way to find out what is consuming more and more memory in the native heap. I started looking a DTraces but I am new to this. I also thought maybe the Solaris Perftools might be of use but I never used them. Before plunging into a tool more or less blindly, I am asking for advices on how to tackle this issue. Can someone recommend a tool/method to see what is allocated in the heap?
    Regards,
    Stéphan
    Edited by: StephanDupont on Sep 22, 2009 8:47 AM

    After googling a lot I managed to run my application with libumem, generated a core file and succeeded to find some leak with mdb even if ::findleak reported nothing.
    Does anyone knows if the ::findleak (you need libumem and mdb) is supposed to find leak in the native part of the memory and a Java application using the JNI interface?
    Regards,
    Stéphan

  • How to find out what user locked account

    We had production type schema account locked this morning. I checked profile which this user belongs and it has 3 times for Failed Login Attempts. My question is how to find out what user had 3 unsuccessful login attempts and lock this account.
    Oracle version 8.1.7

    Assuming that [auditing was enabled|http://download.oracle.com/docs/cd/B19306_01/server.102/b14220/security.htm#sthref2916], the command
    AUDIT CONNECT WHENEVER NOT SUCCESSFULThat will write audit records when there is an unsuccessful login. Depending on how you've configured auditing, those records will either be written to the SYS.AUD$ table, in which case you can query them through a few different views, or to a file on the operating system that you can grep.
    Justin

  • "Web'n'Walk III" Huawei dongle, how to find out what Huawei model it is?

    I just bought this "web 'n' walk III" UMTS Modem (USB) made by Huawei. I want to instal it but do not know if the enclosed software is out of date (MobileConnectDriver(2.9.2)) and works under SL. Does anybody know how I find out what type of Huawei dangle it is so I can find the correct software?
    any tips as to how to use this smoothly as the stick is to SIM locked and I will use it with a SIM from an other provider (Stick is branded by T-Mobile).

    I worked out the model number, it is 'hidden' in small print on the back, in a larger number.

  • How to find out what is the lock key for the computer

    How to find out what is the lock key for the computer?

    You don't.
    If you forgot or lost the password, all you can practically do is reset it.
    The manner in which you do so depends on what version of OS X you are running. The older versions utilize the reset password utility on your recovery/re-installation disk/drive.
    On Lion, you use the following technique to reset the Administrators password:
    Boot to your Lion Recovery Partition, by holding down the Option key while starting, and then selecting the Recovery HD as the boot choice.
    Once booted, at the top of the screen is a menu ..., select Utilities / Terminal from the menu bar.
    In the Terminal window, type “resetpassword” (without the quotes) and press return. A “Reset Password” window will open. Select your boot volume (your SSD drive) if it is not already selected. Select your administrators username from the menu labeled “Select the user account” if it is not already selected. Follow the prompts to reset the password. Restart the computer from the apple menu.

  • I have recently got a new replacement iPhone 4.  since I got this I have found that my data allowance is getting used up during the night while my phone is charging on the bedside table.  How an I find out what is causing this and stop it happening

    I have recently got a new replacement iPhone 4.  Since I got this I have found that my data allowance is getting used up during the night while my phone is charging on the bedside table.  How an I find out what is causing this and stop it happening?  Some nights the usage is 150 meg!

    You can not access the backup directly.
    Did you restore your replacement from this backup?
    If so then you already have everything in the backup on your device.
    If not, you can wipe the device and restore from this backup:
    Settings > General > Reset > Erase All Content & Settings
    What is it you are worried about losing that isn't already on your current device?

  • How to find out what has been restored to a database instance?

    I'm using RMAN to back up and restore/recover. How to find out what has been restored/recovered to a database instance?
    Oracle version is 11gR2 but compatibility is set to 10.
    Edited by: 881656 on Aug 28, 2012 1:54 AM

    select output
    from V$rman_output
    order by stamp;
    select *
    from V$rman_status
    order by start_time desc;
    Regards
    Asif Kabir
    Handle:      881656
    Status Level:      Newbie
    Registered:      Aug 25, 2011
    Total Posts:      52
    Total Questions:      *30 (30 unresolved)*
    -- please close all the answered threads and mark your helpful post as correct/helpful

  • How to find out what generation my Classic is ?

    Can anyone advise me how I find out what generation my iPod Classic is ? Is there a website I can check with ?
    Many thanks,
    Shell

    Hi Niel, the article I get directed to, doesn't really explain the difference between 6th and 7th generation Classics. Is there anywhere (maybe on the Apple website) I can input the Serial Number and Part Number to be exact ?

  • How to find out what Oracle version?

    Hi,
    Could anyone tell me how to find out what Oracle version is on your AIX/Unix machine? It looks like Oracle Installer doesn't use the native OS installation(installp,pkgadd) process, so I can't use lslpp/pkginfo to find out what filesets are installed.
    Thanks
    HQ.

    Hi!
    As far ar Oracle version is concerned, you can find it at the database level after connecting to the database
    select * from v$version;
    i am not sure if there is someway to find at the o/s level.
    Good luck
    null

  • How to find out what are all the change pointers assoicated for an idoc ??

    Hi ,
    How to find out what are all the change pointers activated for an idoc ??
    Thanks,
    Varma

    Verma,
    You can check what are the active Change Pointers for the message type in tcode <b>BD50</b>
    Use tcode <b>BD61</b> to check whether change pointers are active or not??
    Hope this helps..

  • How to find out what the geniric short forms stand for?

    Hi if you see the ThreadLocal class in jdk1.6 it is written like this in doc. ThreadLocal<T> and if you see the method Class.forName() the return type is Class<?> i am just confused a littele bit. how to find out what this <T> and <?> stands for? I mean how do i know that what to pass in their place?

    [Start from Here|http://java.sun.com/docs/books/tutorial/extra/generics/index.html]

  • How to find out what option you got

    How to find out what option you got because i changed my option from option 1 to option 3 and they said that it will change 31st and i want to find out if it changed how do i do that?

    Log on to bt.yahoo.com, and look under the "My Account" section. It tells you what package you're on.

  • How to find out what network an iphone is locked to.

    How to find out what network an iphone is locked to.
    Assist.

    The previous owner/seller didn't provide this info?
    What does it say at Settings > General > About > Carrier?

  • How to find out what version of iTune and iPhoto I have?

    How to find out what version of iTune and iPhoto I have?

    For each application, launch it and choose About from that application's menu, or control-click its Dock icon, choose Show in Finder, control-click that, and choose Get Info.
    (76257)

Maybe you are looking for

  • FCE4 and iDVD Anamorphic Ken Burns

    I created a 60min movie in iMovie8 using three media: 1) NTSC Anamorphic DV from a Panasonic PV-GS80, 2) JPEG 2816x2112 stills from a Panasonic DMC-FX3, and 3) 848x480 motion JPEG video from the DMC-FX3. An iMovie 8 project in 16:9 aspect was burned

  • Use of   DBMS_LOB.LoadCLOBFromFile on insert trigger

    We have a system where most of the data is stored on disk as BFILES. However, in certain circumstances I'd like to read some of the files into the database as CLOBS as well. I'd like to do this on record creation and thought the easiest way to do thi

  • Issue with Proximity Sensor during calls

    I'm having an issue with the Proximity Sensor not properly detecting when i'm holding my phone to my ear. I can confirm that the iPhone sensor is working by covering it with my finger, but when held to my face, the screen blinks as if it cannot decid

  • How do I check how much memory I have left on my MacBook Pro

    Im just curious because I am a HUGE gamer and Im in the progress of downloading a 6.6 GB game to my 8 GB laptop. Id like to check how much memory I have to be safe and make sure it docent overflow. Unfortunetly I dont know how to do this so thats why

  • Any changes on SCCM console not applied

    Hello, We have stand-alone primary site based on System Center 2012 R2 Configuration Manager, suddenly I notice that any changes occur in console is not applied for example I change local admin password in task sequence, remove computer from specific