SQL Service error on SCCM 2012 R2 Evaluation VHD

Hi
I've downloaded the VHD SCCM 2012 R2, but, SQL Server evaluation is out of date
http://www.microsoft.com/en-us/download/details.aspx?id=40840
I've one error "SLQ Server 2012 has expired...."
How I do now ?
Thanks at all
Scorpio92

Or you could fix this Microsoft?
This issue is at least 2 years old going back to the previous product (SCCM 2012 SP1):
https://social.technet.microsoft.com/Forums/en-US/151f6aa0-5391-4396-998f-d5d5782ed08f/system-center-2012-service-pack-1-configuration-manager-evaluation-vhd
How was this not fixed when you created the 2012 R2 VHD?
This is literally unfathomable how you could do this even once - you create a VHD for evaluation with a date specific eval of SQL? But then you imbeciles manage to do it at least a second time?
None of you at the team behind this deserve your jobs.

Similar Messages

SQL Connection Failed for SCCM 2012 R2 (Unable to load user-specified certificate)

We've recently completed an upgrade from SCCM 2012 SP1 to 2012 R2 and have been running in the new environment for about a week. As of this morning, The consoles failed to connect to the CAS' and one of the Primary Site's database. The issue was resolved
easily enough by addressing a certificate issue in SQL, but I'm left wondering if there's a correlation between the SP1-to-R2 upgrade that would cause the cert to fail. Anyone have experience with this?
2014-01-21 22:10:11.81 Server      The server could not load the certificate it needs to initiate an SSL connection. It returned the following error: 0x8009030d. Check certificates to make sure they are valid.
2014-01-21 22:10:11.81 Server      Error: 26014, Severity: 16, State: 1.
2014-01-21 22:10:11.81 Server      Unable to load user-specified certificate [Cert Hash(sha1) "haaaaassssshhhh"]. The server will not accept a connection. You should verify that the certificate is correctly installed. See
"Configuring Certificate for Use by SSL" in Books Online.
2014-01-21 22:10:11.81 Server      Error: 17182, Severity: 16, State: 1.
2014-01-21 22:10:11.81 Server      TDSSNIClient initialization failed with error 0x80092004, status code 0x80. Reason: Unable to initialize SSL support. Cannot find object or property.
2014-01-21 22:10:11.81 Server      Error: 17182, Severity: 16, State: 1.
2014-01-21 22:10:11.81 Server      TDSSNIClient initialization failed with error 0x80092004, status code 0x1. Reason: Initialization failed with an infrastructure error. Check for previous errors. Cannot find object or property.
2014-01-21 22:10:11.81 Server      Error: 17826, Severity: 18, State: 3.
2014-01-21 22:10:11.81 Server      Could not start the network library because of an internal error in the network library. To determine the cause, review the errors immediately preceding this one in the error log.
2014-01-21 22:10:11.81 Server      Error: 17120, Severity: 16, State: 1.
2014-01-21 22:10:11.81 Server      SQL Server could not spawn FRunCM thread. Check the SQL Server error log and the Windows event logs for information about possible related problems.

We got the same certificate related error events after a fresh install of SCCM 2012 R2 on a new server. It happened during the first reboot after SCCM was installed. In the Certificates mmc, I right-clicked on the certificate used by SQL and chose Manage
Private Keys. Giving the service account that runs the MSSQLSERVER service read rights to the private key allowed SQL to start. However, after a day or so we rebooted the server again, and SQL wouldn't start. Something had removed the service account's read
permission. Since the SCCM configuration wasn't that far along, we uninstalled SCCM. After giving the service account read rights again, and rebooting several times over a few days, and SQL started every time. We then installed SCCM 2012 R2 again, and checked
the certificate's permissions before rebooting. The service account still had read permissions when the install completed, but as soon as the server was rebooted, it lost the permissions again.
The Certificates mmc was then used to request a second computer certificate and then SQL was configured to use that new certificate via SQL Server Configuration Manager. After several days and a number of reboots the SQL services have started normally every
time so the second certificate seems to have fixed the issue. I have kept the original certificate for fear that removing it will cause whatever part of SCCM 2012 R2 that modifies the original certificate to start removing permissions from the new certificate
as well.

SCCM 2012 R2 Trial VHD - Expired SQL

Setup the 2012 R2 VHD and attempted to open the console and (of course apparently) doesn't connect. On inspection I found the SQL service not running and not starting with "SQL Server evaluation period has expired".
I look into it and the SQL used is an evaluation tied to the date the VHD was created. Microsoft's only official comment I can find is to turn your clock back...
Looking further into it same issues and comments for 2012 and 2012 SP1 VHDs.
So for three products in a row, same issue which renders the EVALUATION VHD useless. It is 100% useless. Unless I pull a SQL key out of my ass or turn back the clock (which is not in anyway a solution vs fixing this after the last 3 times) this is a waste
of a day downloading, extracting and configuring a VM.
I was going to sell SCCM to a customer. Probably around $50k over 2 years in licensing to first get their servers then PCs covered. But when Microsoft treat their partners and customers like scum, not fixing a huge issue just with the evluation of their
product, I would be beyond irresponsible selling this GARBAGE to them.
Like if you won't fix the evaluation what does that say about the product and support?
And what irks me more is no one actually involved in the products or in any position to fix this will ever read this or care. Nothing will be done. Microsoft won't change from doing this shit over and over. They hate their partners and customers and will
never change.
If you are a partner or customer considering SCCM DON'T. Microsoft don't even fix their evaluation after releasing it 100% broken 3 times in a row.

Still tuned Torsten if you ever got a response.
I sent an email to our distributor. I got a "we've forwarded your email blah blah blah" back and never heard another thing despite following up again. Let them know they missed a $20k this year and $30k next year sale because of it, they don't
care I guess (Synnex in Australia by the way).
Really this just isn't good enough from Microsoft and I stand by what i said above. If you're looking for a solution find a non MS one here. Their distributors don't care one bit and MS don't care one bit even about their evaluations. Too many managers and
teams and BS at MS for anyone to take ownership of something like this and have it fixed.

Required Ports to connect remote SQL named Instance for SCCM 2012 R2

Hi,
I have allowed the TCP 1433,1434,135 and 80 but still unable to connect the remote SQL named instance DB for the SCCM 2012 R2... and getting below error..can you please suggest if any other port required for the same, i have turned off the windows
firewall and RPC service is running ob Remote SQL and SCCM 2012 R2 server..
CCMsetuplog
Shailendra Dev

During the installation you need more ports. You would also need the (dynamic) RPC ports. See for a complete list (section Site Server --> SQL Server):
https://technet.microsoft.com/en-us/library/hh427328.aspx
My Blog: http://www.petervanderwoude.nl/
Follow me on twitter: pvanderwoude

SQL Editions and Migrating SCCM 2012 R2

Hey guys looking for a bit of info here...
We have an existing hierarchy of 1 CAS and 3 Primary sites, along with 13 secondary sites attached to 1 of the Primary Sites. I just learned that during the setup of these sites SQL 2012 Enterprise Evaluation Edition was used to install all the sites. Now the
Evaluation Edition on the CAS SQL server has expired... oops... Obviously I don't want to pay for Enterprise licenses if I don't need them, so I'm looking for a way to get to SQL Standard.
I have found some information about moving SCCM Sites to a new SQL server but am a bit nervous doing that from what I've read on how picky SCCM is with not changing SQL stuff. I have a guy here who is a bit of a SQL guru that feels like we should be able to
migrate to a new SQL database pretty smoothly, but I'm a tad skeptical since he doesn't know much, if anything, about SCCM.
My thought was to build a new hierarchy and use the built in migration feature of SCCM 2012 R2 to move data to the new hierarchy. Are there any caveats to the migration? Are there things that can't be transferred using a migration job? Will I have to re-install
all of our clients once we migrate?
Has anyone done this, or could anyone provide some insight on which route to pursue? I'm leaning more towards the migration since it's built into SCCM and it is meant to do that sort of thing, rather than trying to rip the SQL DB out from behind SCCM and trying
to connect it to a new instance.
Thanks in advance for any help.

Actually, your SQL guru is right. It's easy enough to do it underneath it all. Just stop all of the CM stuff before they rip and replace. Can't hurt to make sure you have a good SQL backup of your CM database on the CAS in a safe place
just before he starts, too. The main thing is to keep as much as you can in the exact same places, (although that isn't that big of deal either); but the fewer things you change the better; like tempdb or how your files for sql are laid out for your
CAS--don't move them about just because you're reinstalling SQL.
We did do that in CM07; moved from SQL ent to SQL Std because we didn't really need ent.
Worst case scenario, if CM doesn't wake up well post-reinstall, you have to run through Site Recovery / restore from your SQL backup (which you carefully remembered to take, right after shutting down SMS services but before the SQL guy started ripping out
the old eval version).
Standardize. Simplify. Automate.

SCCM 2012 - Trying Evaluation version

Hello all,
I'm trying out the 180 day evaluation version of SCCM 2012 R2 downloaded from Microsoft as part of a small POC, (VHD format) which is pre-configured and installed with all the pre-requisites.
As part of this exercise, I wanted to perform a simple discovery of devices in SCCM 2012 but after enabling all the "discovery methods" I do not see any devices in the collection after running the discovery. The VHD format is configured with a
'contoso' domain and this feature is 'locked' as a result I'm not able to configure this 'vhd' format to our internal domain to help discovery.
My question: is there a way to by-pass this domain and perform discovery or is this a limitation in the evaluation version of SCCM? or am I missing something?
Any help on this is appreciated.
thanks

I don't believe so. You should just download the bits from the VLC and install it for yourself. You could have a small test environment in no time at all. Collocate your PS and SQL server, add a DP, and you should be close to lab testing.
Make sure you are not running discovery across your whole environment if this is just a lab.
Best, Jacob I'm a PC.

SQL version problem during SCCM 2012 sp1 setup

Hi
I am trying to install SCCM 2012 sp1 with a remote sql 2012 server.
during setup when I enter the SQL name i hit next and then I get this error.
"Configuration Manager requires Microsoft SQL Server 2008 SP2 with Cumulative update 9 or higher, Microsoft SQL Server 2008 SP3 with Cumulative update
4 or higher, Microsoft SQL Server 2008 R2 SP1 with Cumulative update 6 or higher or Microsoft SQL Server 2012 with Cumulative update 2 or higher,"
I installed SQL sp1 and CU3 as well. but still the same error.
please assist
thanks
troy

Hi,
If you use default instance, please do not fill in the instance name.
You could use “telnet sqlserver 1433” to verify the connection and port.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

UDI OSD Task Sequences started failing with 0x80070002 error in SCCM 2012

This is kind of long, but here goes...
We built a UDI task sequence in SCCM 2012 (with MDT integration) that we were testing for deployment of a couple of different Win7 images. We customized the UDI experience thru the UDI wizard and XML file and OS deployment worked as expected
thru the task sequence (testing on Hyper-V VMs). Recently, this UDI TS started failing with error 0x80070002 during what appears to be the "Use Toolkit Package" step. This is after the OS image has already been laid down and after the ConfigMgr
client has been installed/configured. The SMSTS.log reports "Failed to open the task sequence key HKLM\Software\Microsoft\SMS\Task Sequence. Error code 0x8007002" Among other errors...I will post the entire log below...
After the error during deployment, Win7 will boot normally, however, you have no network connectivity and it appears the proper network driver didn't get loaded in the OS. Combine this with the fact that the TS should have joined the machine to our domain,
but you can't login because no network.. Im not sure if the network issue is a product of the TS failing early or the actual cause of the TS failure.
Anyway, I attempted to build another UDI task sequence using the same boot image and toolkit/settings packages, but am experiencing the same error during deployment. We have a few OSD task sequences built without UDI and those all still work just fine.
So, I am at a loss for where the root problem lies. Any suggestions or assistance would be greatly appreciated.
Here is the entire SMSTS.log and BDD.log...
https://skydrive.live.com/redir?resid=D65B1C4362892A26!110&authkey=!AKu5mOvDsXaEgvc
Thanks
Richie Tenhet

your failure does appear to be network (driver or otherwise) or dns related and it cannot contact the management point FQDN just around the time where it should download and execute the
Use Toolkit Package step...
"Starting Task Sequence Engine . . . "
"Non fatal error 0x80072ee7 in sending task sequence execution status message to MP"
"Start executing an instruciton. Instruction name: Use Toolkit Package. Instruction pointer: 83"
"unknown host (gethostbyname failed)"
"sending with winhttp failed; 80072ee7"
"Tried all the available http based locations. SMB based locations will be attempted now."
"Failed to resolve the source for SMS PKGID=P0100015, hr=0x80070002"
"Failed to run the action: Use Toolkit Package.
The system cannot find the file specified. (Error: 80070002; Source: Windows)"
that said, check that the package referenced above actually exists and is the correct source version on your distribution points, also verify (press F8 and check can you ping the FQDN of your management point) that you have network connectivity
around the time of the failure.
Step by Step Configuration Manager Guides >
2012 Guides |
2007 Guides | I'm on Twitter > ncbrady

Error OOB SCCM 2012 R2 - AMT vPro

I am running SCCM 2012 R2 to make the provisioning of vPRO, but I'm encountering some difficulties.
At first when efetued the configuration of Intel SCS 9, unable to login normally efetued some tests shutdown and power on and functioned normally. The next day when I got to the office, was no longer running the web interface, I'm not getting login. No changes
were made in the environment during this period. When I try to make the AMT discovery in SCCM, it generates me the error "Failed to establish tcp session" and gives me the IP and the host port 16993. If I place the PSK or PKI configuration within
the MEBx, it generates a user and password error saying it can not authenticate with the Admin user.
Already redid the procedure following the Intel and Microsoft manual, but the error persists. SCCM can identify the version of vPRO, but the status it says "Can not Stand", regardless of the version ... 4.x, 5.x and 6.x, it displays the same message
every time.
This is the log of the error when I'm not using PSK setting in the MEBx that is generated in the AMT discovery of SCCM
================================================================
AMT Discovery Worker: Wait 9 seconds... SMS_AMT_OPERATION_MANAGER 05/12/2014 14:49:47 2984 (0x0BA8)
Discover INFRANOTE using IP address 10.234.9.13 SMS_AMT_OPERATION_MANAGER 05/12/2014 14:49:46 4492 (0x118C)
CAMTDiscoveryWSMan::DoConnectToAMTDevice: Failed to establish tcp session to 10.234.9.13:16993. SMS_AMT_OPERATION_MANAGER 05/12/2014 14:49:48 4492 (0x118C)
DoPingDiscoveryForAMTDevice succeeded. SMS_AMT_OPERATION_MANAGER 05/12/2014 14:49:48 4492 (0x118C)
Discovery to IP address 10.234.9.13 succeed. AMT status is 0. SMS_AMT_OPERATION_MANAGER 05/12/2014 14:49:48 4492 (0x118C)
CSMSAMTDiscoveryTask::Execute, discovery to INFRANOTE succeed. AMT status is 0. SMS_AMT_OPERATION_MANAGER 05/12/2014 14:49:48 4492 (0x118C)
================================================================
And this is the log generated when using PSK / PKI configuration in MEBx:
================================================================
DoPingDiscoveryForAMTDevice succeeded.
SMS_AMT_OPERATION_MANAGER
08/12/2014 17:01:25
5336 (0x14D8)
Error 0x80090304 returned by InitializeSecurityContext during follow up TLS handshaking with server.
SMS_AMT_OPERATION_MANAGER
08/12/2014 17:01:25
5336 (0x14D8)
**** Error 0x1d38b100 returned by ApplyControlToken
SMS_AMT_OPERATION_MANAGER
08/12/2014 17:01:25
5336 (0x14D8)
DoSoapDiscovery failed with user name: admin.
SMS_AMT_OPERATION_MANAGER
08/12/2014 17:01:26
5336 (0x14D8)
Error 0x80090304 returned by InitializeSecurityContext during follow up TLS handshaking with server.
SMS_AMT_OPERATION_MANAGER
08/12/2014 17:01:26
5336 (0x14D8)
**** Error 0x1d38b100 returned by ApplyControlToken
SMS_AMT_OPERATION_MANAGER
08/12/2014 17:01:26
5336 (0x14D8)
DoSoapDiscovery failed with user name: admin.
SMS_AMT_OPERATION_MANAGER
08/12/2014 17:01:26
5336 (0x14D8)
Flag iWSManFlagSkipRevocationCheck is not set.
SMS_AMT_OPERATION_MANAGER
08/12/2014 17:01:26
5336 (0x14D8)
session params : https://FQDN COMPUTER:16993
, 11001
SMS_AMT_OPERATION_MANAGER
08/12/2014 17:01:26
5336 (0x14D8)
ERROR: Invoke(get) failed: 80020009argNum = 0
SMS_AMT_OPERATION_MANAGER
08/12/2014 17:01:26
5336 (0x14D8)
Description: A security error occurred
SMS_AMT_OPERATION_MANAGER
08/12/2014 17:01:26
5336 (0x14D8)
Error: Failed to get AMT_SetupAndConfigurationService instance.
SMS_AMT_OPERATION_MANAGER
08/12/2014 17:01:26
5336 (0x14D8)
DoWSManDiscovery failed with user name: admin.
SMS_AMT_OPERATION_MANAGER
08/12/2014 17:01:26
5336 (0x14D8)
Flag iWSManFlagSkipRevocationCheck is not set.
SMS_AMT_OPERATION_MANAGER
08/12/2014 17:01:26
5336 (0x14D8)
session params : https://FQDN COMPUTER:16993
, 11001
SMS_AMT_OPERATION_MANAGER
08/12/2014 17:01:26
5336 (0x14D8)
ERROR: Invoke(get) failed: 80020009argNum = 0
SMS_AMT_OPERATION_MANAGER
08/12/2014 17:01:26
5336 (0x14D8)
Description: A security error occurred
SMS_AMT_OPERATION_MANAGER
08/12/2014 17:01:26
5336 (0x14D8)
Error: Failed to get AMT_SetupAndConfigurationService instance.
SMS_AMT_OPERATION_MANAGER
08/12/2014 17:01:26
5336 (0x14D8)
DoWSManDiscovery failed with user name: admin.
SMS_AMT_OPERATION_MANAGER
08/12/2014 17:01:26
5336 (0x14D8)
Start Kerberos Discovery
SMS_AMT_OPERATION_MANAGER
08/12/2014 17:01:26
5336 (0x14D8)
Flag iWSManFlagSkipRevocationCheck is not set.
SMS_AMT_OPERATION_MANAGER
08/12/2014 17:01:26
5336 (0x14D8)
session params : https://FQDN COMPUTER:16993
, 484001
SMS_AMT_OPERATION_MANAGER
08/12/2014 17:01:26
5336 (0x14D8)
ERROR: Invoke(get) failed: 80020009argNum = 0
SMS_AMT_OPERATION_MANAGER
08/12/2014 17:01:26
5336 (0x14D8)
Description: A security error occurred
SMS_AMT_OPERATION_MANAGER
08/12/2014 17:01:26
5336 (0x14D8)
Error: Failed to get AMT_SetupAndConfigurationService instance.
SMS_AMT_OPERATION_MANAGER
08/12/2014 17:01:26
5336 (0x14D8)
DoKerberosWSManDiscovery failed.
SMS_AMT_OPERATION_MANAGER
08/12/2014 17:01:26
5336 (0x14D8)
Flag iWSManFlagSkipRevocationCheck is not set.
SMS_AMT_OPERATION_MANAGER
08/12/2014 17:01:26
5336 (0x14D8)
session params : https://IP + Port (16993)
, 15001
SMS_AMT_OPERATION_MANAGER
08/12/2014 17:01:26
5336 (0x14D8)
ERROR: Invoke(get) failed: 80020009argNum = 0
SMS_AMT_OPERATION_MANAGER
08/12/2014 17:01:26
5336 (0x14D8)
Description: A security error occurred
SMS_AMT_OPERATION_MANAGER
08/12/2014 17:01:26
5336 (0x14D8)
Error: Failed to get AMT_SetupAndConfigurationService instance.
SMS_AMT_OPERATION_MANAGER
08/12/2014 17:01:26
5336 (0x14D8)
DoWSManDiscovery failed with user name: admin.
SMS_AMT_OPERATION_MANAGER
08/12/2014 17:01:26
5336 (0x14D8)
Flag iWSManFlagSkipRevocationCheck is not set.
SMS_AMT_OPERATION_MANAGER
08/12/2014 17:01:26
5336 (0x14D8)
session params : https://IP + port (16993)
, 15001
SMS_AMT_OPERATION_MANAGER
08/12/2014 17:01:26
5336 (0x14D8)
ERROR: Invoke(get) failed: 80020009argNum = 0
SMS_AMT_OPERATION_MANAGER
08/12/2014 17:01:26
5336 (0x14D8)
Description: A security error occurred
SMS_AMT_OPERATION_MANAGER
08/12/2014 17:01:26
5336 (0x14D8)
Error: Failed to get AMT_SetupAndConfigurationService instance.
SMS_AMT_OPERATION_MANAGER
08/12/2014 17:01:26
5336 (0x14D8)
DoWSManDiscovery failed with user name: admin.
SMS_AMT_OPERATION_MANAGER
08/12/2014 17:01:26
5336 (0x14D8)
Discovery to IP address 10.234.10.84 succeed. AMT status is 1.
SMS_AMT_OPERATION_MANAGER
08/12/2014 17:01:26
5336 (0x14D8)
CSMSAMTDiscoveryTask::Execute, discovery to "COMPUTER NAME succeed. AMT status is 1.
SMS_AMT_OPERATION_MANAGER
08/12/2014 17:01:26
5336 (0x14D8)
CSMSAMTDiscoveryTask::Execute - DDR written to C:\Program Files\Microsoft Configuration Manager\inboxes\auth\ddm.box
SMS_AMT_OPERATION_MANAGER
08/12/2014 17:01:26
5336 (0x14D8)
CStateMsgReporter::DeliverMessages - Queued message: TT=1201 TIDT=0 TID='Unspecified' SID=10 MUF=0 PCNT=1, P1='FQDN' P2='' P3='' P4='' P5=''
SMS_AMT_OPERATION_MANAGER
08/12/2014 17:01:27
5336 (0x14D8)
CStateMsgReporter::DeliverMessages - Created state message file: C:\Program Files\Microsoft Configuration Manager\inboxes\auth\statesys.box\incoming\w73tgg1d.SMX
SMS_AMT_OPERATION_MANAGER
08/12/2014 17:01:27
5336 (0x14D8)
General Worker Thread Pool: Succeed to run the task "FQDN". Remove it from task list.
SMS_AMT_OPERATION_MANAGER
08/12/2014 17:01:27
5336 (0x14D8)
General Worker Thread Pool: Work thread 5336 has been requested to shut down.
SMS_AMT_OPERATION_MANAGER
08/12/2014 17:01:27
5336 (0x14D8)
General Worker Thread Pool: Work thread 5336 exiting.
SMS_AMT_OPERATION_MANAGER
08/12/2014 17:01:27
5336 (0x14D8)
General Worker Thread Pool: Current size of the thread pool is 0
SMS_AMT_OPERATION_MANAGER
08/12/2014 17:01:27
3696 (0x0E70)
AMT Discovery Worker: Wakes up to process instruction files
SMS_AMT_OPERATION_MANAGER
08/12/2014 17:01:45
3728 (0x0E90)
AMT Discovery Worker: Wait 3600 seconds...
SMS_AMT_OPERATION_MANAGER
08/12/2014 17:01:45
3728 (0x0E90)
Could anyone help?
Thank you.

I wouldn't even try using CM with AMT. CM only supports some of the older Vpro chipsets. I had a case open with CSS and they literally suggested that I use the Intel software instead of CM.
John Marcum | Microsoft MVP - Enterprise Client Management
My blog: System Center Admin | Twitter:
@SCCM_Marcum | Linkedin:
John Marcum

Error installing SCCM 2012 client on server

Hi Guys,
I am trying to install the SCCM 2012 client on a machine in my domain. The account specified in client settings is indeed a local admin on this server, but I get the error below:
Any assistance much appreciated!

Hi GSS1,
You can check on the C:\Windows\ccmsetup\logs , files: ccmsetup.log and client.msi.log for errors of clues about the real failure.
On the other hand I would recommend you the manual installation from the UNC path, like:
\\SCCMServerName\SMS_sitecode\Client\ccmsetup.exe
and using the parameters listed here to define the settings: https://technet.microsoft.com/en-us/library/bb693546.aspx?f=255&MSPPError=-2147217396
Optionally you can copy the files from the \\...\Client\ folder to local and try a local installation.
Any of this steps will give you more clues about the failure if they fail or success.
Please share any update for more suggestions!

XP Capture Error (0x0000007F)~~SCCM 2012

Hi All,
When I tried to capture XP image using SCCM 2012 media,
I am getting below error i have copied sysprep in C:\.
Error Code ~~0X0000007F

Hi,
Smsts.log location:
Windows PE before HDD format: x:\windows\temp\smstslog\smsts.log
Windows PE after HDD format: x:\smstslog\smsts.log and copied to c:\_SMSTaskSequence\Logs\Smstslog\smsts.log
Full version Windows before SCCM agent installed: c:\_SMSTaskSequence\Logs\Smstslog\smsts.log
Full version Windows after SCCM agent installed: c:\windows\system32\ccm\logs\Smstslog\smsts.log
Full version Windows (x64) after SCCM agent installed: c:\windows\sysWOW64\ccm\logs\Smstslog\smsts.log
After Task Sequence has finished running: c:\windows\system32\ccm\logs\smsts.log
After Task Sequence has finished running (x64): c:\windows\sysWOW64\ccm\logs\smsts.log
http://penetrateit.wordpress.com/2013/02/08/configuration-manager-2012-sp1-smsts-log-log-location/
(Note: Microsoft provides third-party contact information to help you find technical support. This contact
information may change without notice. Microsoft does not guarantee the accuracy of this third-party contact information.)
Best Regards,
Joyce
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Error installing SCCM 2012 SP1 client

Hi All,
I am getting the following error, detailed in the client.msi.log, when trying to install the SCCM 2012 SP1 client on a couple of windows 2008 R2 servers.
Error 1904. Module C:\Windows\CCM\StatusAgentProxy.dll failed to register. HRESULT -2147010895
The ccmsetup.log details the same message without Error 1904 indicated.
I am installing the client using the SUP method, which has worked without any problems on all 180 other windows servers I have done. ccmsetup starts and downloads all pre reqs required for the client rollout, but it then hits this error and does not
finish the installation.
Any help would be much appreciated?
Regards PowerShell90

Hi,
I've seen this issue a couple of times and usually it's related to incorrect Versions of C++ Library installed on the system you try to install the Client. Try and remove any existing installations, reboot and install this version;
http://www.microsoft.com/en-us/download/details.aspx?id=26368
Let me know how it goes.

Sccm 2012 sp1 evaluation expired

Hi
I have one primary SCCM 2012 SP1 server, this week SCCM evaluation has expired. Tried the
maintenance option from the start programs, but activation tab is missing. please help.
Midhun.PS

Better late than never, right? I had the same exact problem. Started playing around with the registry key values in CCM, CCMSetup and SMS\Setup keys.
Looooooooong story short, but this is mostly for everyone ELSE that is coming here with the same problem:
1. regedit
2. HKLM\Software\Microsoft\SMS\Setup
3. Find Product ID string. It will be set to NONEVAL. Change the value to EVAL.
4. Re-run the setup. 3rd page will give you the option for the key now...
Holy... pain in the _____ (you insert a word for how ridiculously painful this process was)
Good luck
PCFixerGuy

Collection evaluator error in SCCM 2012 SP1

I m getting below errors continuously in colleval.log,
CCEPSource::GetCollectionInfo:- Collection Not Found with CollectionID=2924
CEP-ErrorCode=-2016280319
CEP-Failed to process Collection Extended Properties changes, Status = COLLECTION NOT FOUND FOREIGN KEY CONSTRAINTS, changes will be retried on next processing cycle.
But, there is no such collection id '2924' in SCCM database. Due to these continuous errors, SMS_Collection_Evaluator component is in Critical.

Colleval.box had some CEP files (240+ files) and I deleted all of them.
Now, Colleval.box is empty and Colleval.box\Retry folder is also empty.

Error Message SCCM 2012 ERROR: Unable to access target machine for request

Should I be concerned with this message, or will it resolve on its own?
---> ERROR: Unable to access target machine for request: "2097153953", machine name: "MININT-NAEAFL", access denied or invalid network path. SMS_CLIENT_CONFIG_MANAGER 4/21/2015 11:34:59 AM 8100 (0x1FA4)
Execute query exec [sp_CP_SetLastErrorCode] 2097153953, 53 SMS_CLIENT_CONFIG_MANAGER 4/21/2015 11:34:59 AM 8100 (0x1FA4)
This machine is nowhere in my AD or SCCM...It was at one time, But I have deleted it. It still appears in the Logs. The CCM.LOG to be Precise
Bryan

No, this is nothing to be concerned with. Assuming you have auto-client push enabled, it will try to push the client agent to a resource without the agent every hour for 7 days. Thus, after the 7 day period expires from the last time it was discovered,
it won't try to push to this system anymore.
Jason | http://blog.configmgrftw.com | @jasonsandys

SQL Service error on SCCM 2012 R2 Evaluation VHD

Similar Messages

Maybe you are looking for