SQL statement for Search Box

I am looking for a SQL statement for Search Box in the sample application.
Anyone knows about these issues?
Thanks in advance,
Sam
Edited by: samNY on Mar 13, 2009 2:18 PM

Thank Manish,
Could you tell me how to restrict in following codes?
select
e.EQUIPMENT_ID,
e.HOST_NAME,
e.SERIAL_NUMBER,
e.CITY,
e.ROOM,
e.RACK,
e.CR_DT,
e.CR_USR,
e.LM_USR,
e.LM_DT,
e.TASK_TASK_ID
from SVR_EQUIPMENT e
where
instr(upper(e.SERIAL_NUMBER),upper(nvl(:P1_REPORT_SEARCH,e.SERIAL_NUMBER))) > 0 and
instr(upper(e.CITY),upper(nvl(:P1_REPORT_SEARCH,e.CITY))) > 0 and
instr(upper(e.CR_USR),upper(nvl(:P1_REPORT_SEARCH,e.CR_USR))) > 0 or
instr(upper(e.LM_USR),upper(nvl(:P1_REPORT_SEARCH,e.LM_USR))) > 0
Thanks for all again,
Sam

Similar Messages

Need help on SQL Statement for UDF

Hi,
as I am not so familiar with SQL statements on currently selected values, I urgently need help.
The scenario looks as follows:
I have defined two UDFs named Subgroup1 and Subgroup2 which represent the subgroups dependent on my article groups. So for example: When the user selects article group "pianos", he only sees the specific subgroups like "new pianos" and "used pianos" in field "Subgroup1". After he has selected one of these specific values, he sees only the specific sub-subgroups in field "Subgroup2", like "used grand pianos".
I have defined UDTs for both UDFs. The UDT for field "Subgroup1" has a UDF called "ArticleGroup" which represents the relation to the article group codes. The UDT for field "Subgroup2" has a UDF called "Subgroup1" which represents the relation to the subgroups one level higher.
The SQL statement for the formatted search in field "Subgroup1" looks as follows:
SELECT T0.[Name] FROM [dbo].[@B_SUBGROUP1] T0 WHERE T0.[U_ArticleGroup] = (SELECT $[OITM.ItmsGrpCod])
It works fine.
However, I cannot find the right statement for the formatted search in field "Subgroup2".
Unfortunately this does NOT WORK:
SELECT T0.[Name] FROM [dbo].[@B_SUBGROUP2] T0 WHERE T0.[U_Subgroup1] = (SELECT $[OITM.U_Subgroup1])
I tried a lot of others that didn't work either.
Then I tried the following one:
SELECT T0.[Name] FROM [dbo].[@B_SUBGROUP2] T0 WHERE T0.[U_Subgroup1] = (SELECT T1.[Code] FROM [dbo].[@B_SUBGROUP1] T1 WHERE T1.[U_ArticleGroup] = (SELECT $[OITM.ItmsGrpCod]))
Unfortunately that only works as long as there is only one specific subgroup1 for the selected article group.
I would be sooooo happy if there is anyone who can tell me the correct statement for my second UDF!
Thanks so much in advance!!!!
Edited by: Corinna Hochheim on Jan 18, 2010 10:16 PM
Please ignore the "http://" in the above statements - it is certainly not part of my SQL.
Please also ignore the strikes.

Hello Dear,
Use the below queries to get the values:
Item Sub Group on the basis of Item Group
SELECT T0.[Name] FROM [dbo].[@SUBGROUP] T0 WHERE T0.[U_GroupCod] =$[OITM.ItmsGrpCod]
Item Sub Group 1 on the basis of item sub group
SELECT T0.[Name] FROM [dbo].[@SUBGROUP1] T0 WHERE T0.[U_SubGrpCod]=(SELECT T0.[Code] FROM [dbo].[@SUBGROUP] T0 WHERE T0.[Name] =$[OITM.U_ItmsSubgrp])
Sub group 2 on the basis of sub group 1
SELECT T0.[Name] FROM [dbo].[@SUBGROUP2] T0 WHERE T0.[U_SubGrpCod1]=(SELECT T0.[Code] FROM [dbo].[@SUBGROUP1] T0 WHERE T0.[Name] =$[OITM.U_ItmsSubgrp1])
this will help you.
regards,
Neetu

Nested SQL statements for complex, detailed queries.

Is it possible to write nested SQL statements for complex, detailed queries. A nested query
has a WHERE clause that includes a SELECT statement ? Is it true or false ?

Hi wahid,
Here are pretty good examples:
http://www.databasejournal.com/features/mssql/article.php/3464481/Using-a-Subquery-in-a-T-SQL-Statement.htm
http://technet.microsoft.com/en-us/library/aa213252(v=sql.80).aspx
Regards Harsh

Preparing Dynamic SQL statement for inserting in Pro*C

Hi Friends,
From quite some time i am struggling writing Dynamic SQL statement for dynamic insert and update in Pro*C.
Can somebody go through my code and suggest me the rigth way of doing.
Right now it throws an error saying " Error while updating ORA-00904: invalid column name "
Please help me.
Girish.
int main()
EXEC SQL BEGIN DECLARE SECTION;
char *uid ="scott/tiger";
static char sqlstmt[129];
struct /* DEPT record */
int dept_num;
char dept_name[15];
char location[14];
} dept_rec;
EXEC SQL END DECLARE SECTION;
EXEC SQL WHENEVER SQLERROR DO sql_error();
EXEC SQL CONNECT :uid;
dept_rec.dept_num = 50;
strcpy(dept_rec.dept_name,"ADMIN");
strcpy(dept_rec.location,"IN");
strcpy(sqlstmt,"UPDATE dept set DNAME = dept_rec.dept_name where DEPTNO = dept_rec.dept_num");
EXEC SQL EXECUTE IMMEDIATE:sqlstmt;
EXEC SQL COMMIT;
exit(0);
void sql_error()
printf("\nError while updating %s",sqlca.sqlerrm.sqlerrmc);
EXEC SQL ROLLBACK;
}

A bit rusty here but this is how I see it.
Think of it this way ..
all Oracle is going to see is:
UPDATE dept set DNAME = dept_rec.dept_name where DEPTNO = dept_rec.dept_num
Its NOT going to know what dept_rec.dept_name is or dept_rec.dept_num is ..
it doesnt go back and fill in those values.
You need something like
strcpy(sqlstmt,"UPDATE dept set DNAME = \"");
strcat(sqlstmt,dept_rec.dept_name);
strcat(sqlstmt,"\" where DEPTNO = ");
strcat(sqlstmt,dept_rec.dept_num);
printf(sqlsmt); # Just to be sure the update statement look right during testing.

Need SQL statement for this logic....

Hi,
I want a SQL statement for updating the following changed last number .
Cuurently its:
SELECT * FROM TEST;
LAST NUMBER     CHANGED LAST NUMBER
123518
12355265
123674659
9087648970
After updating with the required SQL statement table should look like
LAST NUMBER     CHANGED LAST NUMBER
123518          0000123518
12355265     0012355265
123674659     0123674659
9087648970     9087648970
the last number should be appended with ZEROs and the length of changed last number should be 10 always. Hope its clear.
Appreciate your help.
Thanks in advance
Devender

select last_number, lpad(to_char(last_number), 10 , '0') FROM test

APP-ALR-04106: Please correct the user-defined SQL statement for this alert

Hi All,
I have created an alert for engineering module in R12. It got tested and was working fine. when the user testing it, while trigger the alert getting the error, "APP-ALR-04106: Please correct the user-defined SQL statement for this alert".
when verified the alert, it got verified and ran also. It parsed the query successfully and when run it fetched few records.
Need help in resolving the issue.
Thanks in advance.
Regards,
sri
Edited by: user10939296 on Jan 18, 2010 1:16 AM

Hi Sri;
I have already gone through the Note: 948037.1. But this note is related to 11i. The solution provided in the Note is for 11i.
I am facing this issue in R12. Is this patch applicable to R12?I belive its not. But u can check Solution part 4 for your instance, at least it can give you idea. The other note in metalink related bug and all for R11 too.
I belive its better way to rise Sr while waiting other forum user response to that thread
Regard
Helios

Problem with SQL Statement for Result Filtering

Dear Visual Composer Experts,
Here is another Question from me: I have a SQL Query that is working as the data service
Select AB.AgingBandID, AB.AgingBand,
Sum(Case when priority='Emergency' then '1' Else 0 End) as [Emergency],
Sum(Case when priority='Ugent' then '1' Else 0 End) as Ugent,
Sum(Case when priority='High' then '1' Else 0 End) as High,
Sum(Case when priority='Medium' then '1' Else 0 End) as Medium,
Sum(Case when priority='Low' then '1' Else 0 End) as Low
from DimAgingBand AB left outer join
(Select AgingBandID , priority , yeardesc
from vNotifications where YearDesc = (select year(getdate())-1)) as vN
on AB.AgingBandID=vN.AgingBandID
where AB.AgingBandID<>'1'
Group by AB.AgingBandID, AB.AgingBand
Order by AB.AgingBandID
That would return me a table as in the following:
     Agingband     E     U     H     M     L
     < 1week     0     0     0     0     1
     1 - 2 weeks     0     0     0     0     0
     2 - 4weeks     0     0     0     0     1
> 1month     8     2     1     1     6
Now that I would like to add some parameters to filter the result, so I modify the query and put it in the SQL Statement input port of the same data service. The query is like this:
     "Select AB.AgingBandID, AB.AgingBand,Sum(Case when priority='Emergency' then '1' Else 0 End) as [Emergency],Sum(Case when priority='Ugent' then '1' Else 0 End) as Ugent,Sum(Case when priority='High' then '1' Else 0 End) as High,Sum(Case when priority='Medium' then '1' Else 0 End) as Medium,Sum(Case when priority='Low' then '1' Else 0 End) as Low from DimAgingBand AB left outer join (Select AgingBandID , priority , yeardesc from vNotifications where YearDesc like '2009%' and Branch like '" & if(STORE@selectedBranch=='ALL', '%', STORE@selectedBranch) & "' and MainWorkCentre like '%') as vN on AB.AgingBandID=vN.AgingBandID where AB.AgingBandID<>'1' Group by AB.AgingBandID, AB.AgingBand Order by AB.AgingBandID"
However this input port query keeps giving me error as NullPointerException. I have actually specified a condition where the query will run if only STORE@selectedBranch != u2018u2019.
I have other filtering queries working but they are not as complicated query as this one. Could it be possible that query in the input port cannot handle left outer join?
Could it be anything else?
Help is very much appreciated.
Thanks & Regard,
Sarah

Hi,
Thank you very much for your replys. I've tested if the dynamic value of the condition is integer, it's OK
But if the ClassID type is not integer, it's string, I write a SQL Statement like:
"Select DBADMIN.Class.ClassName from DBADMIN.Class where DBADMIN.Class.ClassID = '1' "
or with dynamic condition:
"Select DBADMIN.Class.ClassName from DBADMIN.Class where DBADMIN.Class.ClassID = '"&@ClassID&"'"
or I write the SQL Statement for insert/update/delete data,
I always have errors.
I've tested if the dynamic value of the condition is integer, it's OK
Do you know this problem ?
Thank you very much & kindly regards,
Tweety

TopLink does not generate SQL statements for inserting new objects

TopLink does not generate SQL statements for inserting new objects. Why?
Thanks in advance...

Please see the response in
Why does not unitofwork.commit write data to the database?
Regards,
Chris

SQL statement for calculating performance targets

Hi
I have taken of the admin of a database which stores project goals and scores. I have to develop a way to calculate how well all projects meet these scores. The table concerned is called goal and looks like this:
goal
goal_name
project_code
current_value
good_value
bad_value
This can be for many different goals, for example if a project wants to get up a goal of having no more than 5 bugs in the project. I can also set a bad value, say 20, so if any projects have 20 or more bugs, triggers or alerts can be sent So I can enter into this table. The reason for putting 5 for good not 20 is because these scores are to be realistic.
project_code = foo
goal_name = software bugs
good_value = 5
bad_value = 20
However, some goals may have the values switched and be in a much higher range, or may even be a percentage. For example one for number of sales could be
project_code = foo
goal_name = software sales
good_value = 200
bad_value = 50
or project delay
project_code = foo
goal_name = sproject delay
good_value = 0%
bad_value = 50%
i am trying to develop a SQL statement so I can get a % score of how well a goal is performing, so I can see
What is the goal % for all foo goals
Or what is the goal % for goal 'software sales'
And also more importantly, how well are the goals doing globally.
The requirement for doing this is using a single SQL statement, well, one SQL statement for the requirements I listed above, so for example the semantics are
SELECT average(goal perforance) WHERE .... project = foo .... or goal = software sales... etc
I am having trouble doing this, I have been banging my head against mydesk all day. the biggest thing is thowing me off is that the good value can be higher or lower than the bad value, and I am having trouble visualizing how to but this conditional statement in SQL
One more thing, the percentage returned should never be more than 0% or 100%.
If anyone has any ideas or pointers, please help me out,
Thanks for your time,
Message was edited by:
user473327

I am having trouble doing this, I have been banging
my head against mydesk all day. the biggest thing is
thowing me off is that the good value can be higher
or lower than the bad value, and I am having trouble
visualizing how to but this conditional statement in
SQLI haven't looked at your requirements in detail cos I don't have time for such cumbersome tasks. However, you could have two UNION'd select statements, one which caters for the good > bad and one which caters for the good < bad. Also and alternative would be the use of DECODE or CASE statements in your select which are good for switching things around based on conditions.
;)

Sql statement for network version of JavaDB database

Hi,
Could somebody please tell is it a must to have double quote for field name inside the SQL statement for JavaDB
I am developing the project using netbean 5.5.1 IDE
integrating netwok version of JavaDB.
example
select "field1","field2" from table1
instead of the simple sql like
select field1,field2 from table1
I find that simple select sql query could not work without having the double quotation eclosed for any of the fieldname called by the SQL statement.
I am not sure is it only unique to netbeans IDE environment , in principle simple plain query should work , this is however not for netbeans IDE, wht is the reason behind?
Thanks

The Quotes around the fieldnames are normally only needed if the field is the same as a reserved word, or has a non-standard character in the field. Look at the JavaDB/Derby manual (specifically the one with the SQL reference) to find out what the reserved words and special characters are, then redefine your table.

SQL Statement for Composite Primary key

Hi,
I need a SQL statement for finding the Distinct values for combination of 2 Columns( Composite Primary key). I dont want to use Data Dictionary views.
Table A
c1 c2
1 1
1 2
2 3
Now for the above table combination of c1 and c2 is unique.
Please advice.
Cheers
Ramkannan.A

This?
PRAZY@solarc> with tableA as
2 (select 1 col1,2 col2 from dual
3 union all
4 select 1,1 from dual
5 union all
6 select 1,2 from dual
7 union all
8 select 2,3 from dual
9 union all
10 select 1,2 from dual
11 union all
12 select 2,3 from dual
13 )
14 select distinct col1, col2 from TableA
15 /
      COL1       COL2
         2          3
         1          2
         1          1Regards,
Prazy

Sql statement for retrieving the last update time of a table

Hello all,
Can somebody give me an example of sql statement for retrieving the last update time of an oracle table.
Thank you
Il

Thanks for the fast replies. It works great when I test it as a sql statement but when trying to populate a datalist with it it raises the following exception:
Exception Details: System.ArgumentException: SCN_TO_TIMESTAMP(MAX(ORA_ROWSCN is neither a DataColumn nor a DataRelation for table DefaultView
Part of the Datalist Code:
ItemTemplate>
Line 12:             SCN_TO_TIMESTAMP(MAX(ORA_ROWSCN)):
Line 13:             <asp:Label ID="SCN_TO_TIMESTAMP_MAX_ORA_ROWSCN__Label" runat="server" Text='<%# Eval("[SCN_TO_TIMESTAMP(MAX(ORA_ROWSCN))]") %>'>
Line 14:             </asp:Label><br/>
Line 15:             <br/>
{code}
Why is this happening? Any ideas?
Il

How to monitor/capture SQL statement for an event?

I want to capture all sql statements for 10 minutes that ran against the database. How should i do that?
Thanks,
Dave

The following document will give u the requred know how.
http://www.oracle.com/technology/products/manageability/database/pdf/ow05/PS_S001_274001_106-1_FIN_v1.pdf

SQL statement - tricky search problem

Hi,
I am working in asp and use an Access db. I have a database
with 500 shops around the world, the table contains among other
things shop name, country and region (Europe, Asia etc). Then a
search page with dropdown lists, one for Region and one for
Country. Here is the problem, which seems easy first, but I really
can´t get the sql statement to do what I want:
The Region list has the following values:
Any region
Europe
Asia
etc
The country list has te following values:
Any country
Sweden
Germany
USA
etc
Ok, so the problem is if the user choose "Any Region" and
"Any Country" all shops should come up. "Europe" and "Any Country"
should give all shops in Europe". "Any region" and "Sweden" should
pull up ONLY shops in Sweden. "Europe" and "Sweden" should also
pull up shops in Sweden only.
Now you start see the problem. I have laborated with AND resp
OR statments and also % resp xyz in the "Any Country" and "Any
Region" values.
Any help would be highly appreciated! Thanks!!

Thank Manish,
Could you tell me how to restrict in following codes?
select
e.EQUIPMENT_ID,
e.HOST_NAME,
e.SERIAL_NUMBER,
e.CITY,
e.ROOM,
e.RACK,
e.CR_DT,
e.CR_USR,
e.LM_USR,
e.LM_DT,
e.TASK_TASK_ID
from SVR_EQUIPMENT e
where
instr(upper(e.SERIAL_NUMBER),upper(nvl(:P1_REPORT_SEARCH,e.SERIAL_NUMBER))) > 0 and
instr(upper(e.CITY),upper(nvl(:P1_REPORT_SEARCH,e.CITY))) > 0 and
instr(upper(e.CR_USR),upper(nvl(:P1_REPORT_SEARCH,e.CR_USR))) > 0 or
instr(upper(e.LM_USR),upper(nvl(:P1_REPORT_SEARCH,e.LM_USR))) > 0
Thanks for all again,
Sam

What is the sql statement for doing this?

Hi,
I am currently doing a simple search engine that allows a user to key in a filename and display all the files' name close to keyed filename(the first two letters are the same).What is the proper sql statement to select from Document according to DocumentType and the first two letters of the filename? Am i doing it the right way? I am currently use Access 2002, dunno if it will affects me.Thanks in advance
[What i did]
String filename="doc,txt"
SELECT DocumentType from Rule where UserType='1' and Action='Search';
DocumentType=1,5,9,13,17,21,25,29,33,37,41,45 // This is all the document Type the user can see.
Next i used StringTokenizer break the DocumentType.
DocumentType[0]=1;
DocumentType[0]=5;
SELECT * from Document where DocumentType and Name <<< I want to select from Document according to DocumentType and the first two letters of the filename

One more try - from what I can follow?
If I assume you have a table named for example "UserRules"
which has fields UserID,UserType,UserAction
and has records like this that controls the document types
a user is allowed to see
UserID UserType Action
TOM 1 Search
BILL 7 Search
ROY 2 Search
And if I assume you have a table named for example "AllowedUserDocumentTypes"
which has fields UserType,DocumentTypes
and has records like this that controls the document types
a user is allowed to see
UserType DocumentTypes
1 1,3,4,5,6,19
2 7,9,12,18
3 1,19,33,27
And you have the document table which has
fields are DocNo,Name,Title,Date,Filename,DocumentType
and it has records like this
DocNo Name Title Date Filename DocumentType
12345 BILL Cars CarTypes 18
12346 ROY Trucks TruckTypes 2
12347 TOM Toys ToyTypes 17
12345 JACK Car Colors CarColors 19
12345 TOM Car Shapes CarShapes 7
Then the select statement
Select DocumentTypes from AllowedUserDocumentTypes
join UserRules where UserRules.UserType = AllowedUserDocumentTypes.UserType
and UserRules.UserID = 'ROY' and UserRules.Action = 'Search';
will return 7,9,12,18
If the DocumentType field is numeric and the user entered "CarCrap" the
select statement would have to look like this
SELECT * from Document
where left(Filename,2) = 'Ca' and DocumentType in (7,9,12,18);
If the DocumentType field is say varchar
select statement would have to look like this
SELECT * from Document
where left(Filename,2) = 'Ca' and DocumentType in ('7','9','12','18');
You will have to build these select statements related to the user.
Note you should also allow for upper and lower case differences. I
would suggest you convert the user entry into uppercase and do a select
like below
SELECT * from Document
where Ucase(left(Filename,2)) = 'CA' and DocumentType in (7,9,12,18);
This is all written from memory, not tested and I have not done this
in several years.
I was showing approximately how to build the statements before.
rykk

SQL statement for Search Box

Similar Messages

Maybe you are looking for