SQL task fails calling procedure but only change was adding an insert

Have a SQL task that calls a procedure. Works fine until I added a block of code that does an insert. Then I get an error such as this
ssis procedure Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly
What the heck? The parameters havent changed and it works fine when called directly in SSMS. Its not a permissions issue either, checked that already.
The statement I added is doing an INSERT INTO SELECT FROM
Works fine in SSMS. Is this another one of those issues where there are too many select statements and SSIS is getting confused?

Disregard. I should have paid closer attention to the execution results in the package, as there were actually 2 errors. It was the first error that was the culprit. Once I fixed that the other error went away.

Similar Messages

Execute SQL Task Failing

Hi there,
I have this issue with my Execute SQL Task Failing. I am trying to execute a sp using an execute sql task. The execute statement is contained in a variable (exec [sp_name] par1, par2) that I have declared at the package level. Now inside the exec sql
tak, I am calling this variable. Now when I try to execute this task, it fails and I get the following:
[Execute SQL Task] Error: Executing the query "EXEC CTL_ISRT_A 55,1" failed with the following error: "Could not find stored procedure 'CTL_ISRT_A'.". Possible failure reasons: Problems with the query, "ResultSet" property not
set correctly, parameters not set correctly, or connection not established correctly.
There is a stored procedure called "CTL_ISRT_A" in the db and I am able to execute it from SQL Server. This sp is inserting a new row in the table and it returns @@IDENTITY.
I tried setting the result set to a 'Single Row' and tried assigning the value to a variable but it didnt help. Could someone help me here?
Thanks in advance

return it as an output parameter
ie make sp like below
ALTER PROCEDURE [devdba].[M_CTL_ISRT]
@F_ID INT
, @PR_IND BIT
, @Debug bit = 0
, @IDVal int = 0 OUTPUT
AS
BEGIN
SET NOCOUNT ON
DECLARE @ErrorMsg varchar(5000)
DECLARE @USR_ID AS INT = 1;
INSERT INTO TBL_D (F_ID, PR_IND, USR_ID,CRE_DT, LAST_MODD_USR_ID, LAST_MODD_DT)
VALUES (@F_ID, @PR_IND, @USR_ID, GETDATE(), @USR_ID, GETDATE())
SELECT @IDVal= @@IDENTITY
END
Then in execute sql task call it as
EXEC devdba].[M_CTL_ISRT] ?,?,0,? OUT
then in parameter tab pass required variables and for last parameter make direction as Output and you'll get identify value stored in it.
Please Mark This As Answer if it helps to solve the issue Visakh ---------------------------- http://visakhm.blogspot.com/ https://www.facebook.com/VmBlogs

With the ISO 8, I'm getting FULL SIZE pictures identifying the caller. But only some, the others in my contacts are still TINY.

With the ISO 8, I'm getting FULLSIZE picture identifying the caller. But only some!
The others in my contact list still come as TINY. Is there a place where i can make them all full size?

Got the same issue ever since upgrading to Facebook for iPhone version 4.1 that was released a few days ago - let me know if you have any luck.

SQL query returns value but EXEC SQL Task fails to assign variable

I have an execute SQL task to get an identifier from an Oracle database and assign it to a variable (the variable is used in subsequent query's where clauses to transfer the data to a SQL Server database). If I copy the query from the SSIS
package to the Oracle SQL Developer interface and run the query; I get the expected single identifier. If I run the execute SQL task I get the error "[Execute SQL Task] Error: An error occurred while assigning a value to variable "VariableName":
"Single Row result set is specified, but no rows were returned."
I can create phony/simpler versions of the query that will return the wrong identifier that will successfully assign the value to the variable, so the problem isn't with the variable itself or the way the result set is set up in the task (Result
Set/Single Row in the General panel; Result Name 0/VariableName in the Result Set panel).
How can two queries that return a single value produce different results with respect to the variable assignment process?

Perhaps you can trap (profile) the query in Oracle to see what it gets submitted,
thing is this query
select id from table where ProcessedStatusColumn is null and DateColumn = (sub select to get most recent date in table where ProcessedStatusColumn is null)
is not guaranteed to return a value, you need a default returned in case the search failed e.g.
select
NVL(id, 0)
from table where ProcessedStatusColumn is null and DateColumn =
(sub select to get most recent date in table where
ProcessedStatusColumn is null)
Arthur My Blog

SSIS custom execute sql task : Failed with error

I am developing a custom SSIS task for running sql task. But it fails with error - I'm trying to set the resultsetbinding to be used by next task in workflow.
Error: 0xC0014054 at CustomSSISTask: Failed to lock variable "User::id" for read access with error 0xC0010001 "The variable cannot be found. This occurs when an attempt is made to retrieve a variable from the Variables collection on a container
during execution of the package, and the variable is not there. The variable name may have changed or the variable is not being created.".
Error: 0xC002F210 at CustomSSISTask, Execute SQL Task: Executing the query "SELECT id FROM sysobjects WHERE name = 'sysrowsets..." failed with the following error: "Failed to lock variable "User::id" for read access with error 0xC0010001
"The variable cannot be found. This occurs when an attempt is made to retrieve a variable from the Variables collection on a container during execution of the package, and the variable is not there. The variable name may have changed or the variable is
not being created.".
". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly.
Warning: 0x80019002 at CustomSSISTask: SSIS Warning Code DTS_W_MAXIMUMERRORCOUNTREACHED. The Execution method succeeded, but the number of errors raised (3) reached the maximum allowed (1); resulting in failure. This occurs when the number of errors reaches
the number specified in MaximumErrorCount. Change the MaximumErrorCount or fix the errors.
Task failed: CustomSSISTask
Here is the code sample I'm trying ,
public override DTSExecResult Execute(Connections connections, VariableDispenser variableDispenser,
IDTSComponentEvents componentEvents, IDTSLogging log, object transaction)
MessageBox.Show("testing:");
try
// Add the SQL Task
Package package = new Package();
package.Executables.Add("STOCK:SQLTask");
Microsoft.SqlServer.Dts.Runtime.Variable variable = package.Variables.Add("id", false, "User", 0);
// Get the task host wrapper
TaskHost taskHost = package.Executables[0] as TaskHost;
// Get the task object
ExecuteSQLTask task = taskHost.InnerObject as ExecuteSQLTask;
// Set core properties
task.Connection = connections[0].Name;
task.SqlStatementSource = "SELECT id FROM sysobjects WHERE name = 'sysrowsets'";
//task.SqlStatementSource =
// "SELECT PersonID from [AmalgaSpeedTableData].[SpeedTable].[DimPerson] where PersonIntID = '1'";
task.SqlStatementSourceType = SqlStatementSourceType.DirectInput;
// Add result set binding, map the id column to variable
IDTSResultBinding resultBinding = task.ResultSetBindings.Add();
//IDTSResultBinding resultBinding = task.ResultSetBindings.GetBinding(0);
resultBinding.ResultName = "variable";
resultBinding.DtsVariableName = variable.QualifiedName; //"User::id";
task.Execute(connections, variableDispenser, componentEvents, log, transaction);
catch (Exception ex)
throw new ArgumentException(ex.Message);
return DTSExecResult.Success;
It doesnt throw any exception but custom task fails.
Later I will be also using parametersetbindings to pass some input parameters to this task , since I'm stuck for out param - blocked moving ahead.
Any help would be greatly appreciated.
Thanks
Sang

Hi, could you check whether the following threads help:
http://stackoverflow.com/questions/5787621/ssis-package-failed-to-locak-variable-for-read-access-with-error-0xc0010001
http://social.msdn.microsoft.com/Forums/sqlserver/en-US/40ee7eff-5ec1-426f-a1a8-ab85b40b51aa/error-variable-can-not-be-found-while-executing-package-from-the-net-code?forum=sqlintegrationservices
Regards, Leo

Execute SQL Task fails when specific column names are mentioned in Excel Query

Hi,
I have a requirement for extracting Excel data with thespecific column order. So instead of using the below query,
Select * From [Sheet1$A1:ZZ1]
I use the below one,
Select col1,
col2,
col91
From [CRM$A1:ZZ1]
So I have totally 91 columns.
I don't face any issues when i use the before query. i.e. direct select * from sheet1
But when i specify column names and do a select from the sheet it throws error as below,
[Execute SQL Task] Error: Executing the query "Select
[Col1]
From [Sheet1$..." failed with the following error: "No value given for one or more required parameters.". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not
set correctly, or connection not established correctly.
I just need to retrieve the column name alone and not any of the values to it. So when i do simple select * it gives the column names in the order of what it is been with the excel. But i do want it to be sorted in alphabetically and to retrieve the column
names.
I am not getting any proper solution for this for past 1 and a half days. May anyone of you please help me get it sorted? - Thank you!
--------------------------- Radhai Krish | Golden Age is no more far | --------------------------

Please use something like below:
SELECT F1 AS Col1, F2 AS Col2, F3 AS Col3, ...
FROM [Sheet1$A1:ZZ1]
Cheers,
Vaibhav Chaudhari
[MCTS],
[MCP]

Execute SQL Tasks Failing for Duplicate Syntax Between DEV and Production DB

Newbie here...be patient with me!
I added tasks to refresh two tables (delete from, insert into, update) to an SSIS project . I have them running from the WinXP scheduler. The issue:
In dev the tasks integrate and execute successfully from scheduler
In prod I can right click and execute each of the three tasks without any problem, but the same tasks cause my project to fail when executed from scheduler
Questions:
Any ideas about what I am failing to see?
How do I get a meaningful log messages from the tasks that are failing?
Thanks for your ideas...
Installed Edition: IDE Standard
SQL Server Analysis Services
Microsoft SQL Server Analysis Services Designer
Version 9.00.1399.00
SQL Server Integration Services
Microsoft SQL Server Integration Services Designer
Version 9.00.1399.00
SQL Server Reporting Services
Microsoft SQL Server Reporting Services Designers
Version 9.00.1399.00
Microsoft Visual Studio 2005
Version 8.0.50727.42 (RTM.050727-4200)
Microsoft .NET Framework
Version 2.0.50727
Installed Edition: IDE Standard
SQL Server Analysis Services
Microsoft SQL Server Analysis Services Designer
Version 9.00.1399.00
SQL Server Integration Services
Microsoft SQL Server Integration Services Designer
Version 9.00.1399.00
SQL Server Reporting Services
Microsoft SQL Server Reporting Services Designers
Version 9.00.1399.00

Newbie here...be patient with me!
I added tasks to refresh two tables (delete from, insert into, update) to an SSIS project . I have them running from the WinXP scheduler. The issue:
In dev the tasks integrate and execute successfully from scheduler
In prod I can right click and execute each of the three tasks without any problem, but the same tasks cause my project to fail when executed from scheduler
Questions:
Any ideas about what I am failing to see?
How do I get a meaningful log messages from the tasks that are failing?
If i understand correctly you are trying to run SSIS package from Window XP task scheduler. The reason for the failure may be due to permission while accessing resources required in the package. However it is difficult to suggest without
looking at the error message.
Scheduled tasks maintains a log file (Schedlgu.txt), in the c:\Windows folder. You can view the log from the Scheduled Tasks window by clicking
View Log on the Advanced menu.
The log file size is 32 kilobytes (KB), and when the file reaches its maximum size, it automatically starts to record new information at the beginning of the log file and writes over the old log file information.
Refer http://support.microsoft.com/kb/308558
http://msdn.microsoft.com/en-us/library/windows/desktop/aa383604(v=vs.85).aspx
Regards, RSingh

SQL task fails if previous task fails

I have a Script task that I fail in the code explicitly based on a variable value. When the script task fails, I set a constraint (failure) to execute the following SQL task
However, I was thinking the SQL task would execute successful, especially since it does if I execute it by itself.
In the package results, I see a failure message like this
[Connection manager "ABC222"] Error: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x8004D00E.

Ok yes, thats what it was. My issue was related to transaction settings. The package was marked as "transactionOption = Required", so regardless if my sql task that sends mail is outside of the container or not, it was going to be part of the
transaction, so when the transaction got rolled back, the sql statement will fail because it appears that the connection was abandoned?
So the resolution was then to change the package transaction property to "Supported", then my SQL task worked as expected. Oh, and I set the transaction option on the sql task itself to "not supported".

FaxSTF fails to send - but only from my main user account!

I bought FaxSTF in version 6 for OS 9, and version 10.5.3 for OS X. My woes with it in OS X are not so much of the kind that I've read while searching this area for answers; they are rather peculiar, and I suspect FaxSTF might not even be at fault (though I can't be sure). For what it's worth, let me also state up front that under OS 9 it worked almost rock-solidly. It was very, very versatile and amazingly reliable. Not so much in OS X; versatility and reliability are out the window. I'll explain:
In my main user account ('alex', admin account) no matter which application I try to fax from, when I click on the blue throbbing 'Fax' button, it stops throbbing and becomes grey and nothing else happens. I can only dismiss the print dialog by clicking on 'Cancel'. There is nothing I have tried which can change this behavior.
Things are better, though, in secondary, standard or admin user accounts on the same machines. From them, I can fax things with no problem whatsoever.
This is the second powerbook on which this is happening: the other one is my TiBook 550MHz running Tiger, also. What it's meant basically is that when I need to send a fax, I have to:
•save my document in a directory accessible by my other, secondary, accounts, then
•use Fast User Switching (thank goodness for that) and through my other account ...
•open the document (usually a PDF by now, so I only have to use Preview which loads fast enough) and
•enter the fax number manually (since my Address Book database is not accessible by the secondary account) and click on Fax.
Of course, if I need to keep track of sent faxes, I then have the additional step of exporting the fax into Fax format from FaxSTF from the secondary account, then over at my main account go into FaxSTF and import it for my records.
Not so practical...
Thankfully, FaxSTF is fine when receiving faxes while logged in my main account.
I was hoping that some useful hints/help will be available through the Discussion Area, as opposed to SmithMicro customer support; they take up to months to reply to an incident posted on their web-driven database, and when they do, their responses are almost meaningless most of the time, assuring me that my problem is not really happening, and reminding me of the correct procedure for doing things (it's the very procedure that doesn't work with me, but often times they haven't even read/understood my incident post in the first place. Very polite people, though; I'll give them that!)
As always, thanks in advance, people.

I would look into if the ports the smtp is using are open at all
if they are closed over 3g then it should work over wifi unles your wifi router block them too
and of cause if you set the wrong encryption or some of the other smtp settings then that too would
explain it

Task fails on server but not on my development PC

hi
I have this annoying error on my server but not in my PC,
When I run the task from VisualStudio2010 it works perfectly. Then I deploy the package to my SqlServer2012 "Intgegration Services Catalogs" and run the deployed package from the SqlManagementConsole I got the error.
The source is an oracle DB and the query wich calculate the field "MONJTO_HRSEXTR" do it with this "sum(nvl(h.monto,0)) monto_hrsext" on the select statement.
I guess the problem is SSIS thinks that the column MONTO_HRSEXTR is "Unicode string[DT_WSTR]" with "lenght=38" and when the conversion process try to cast to Decimal(12,2) it fails. There are 2 big questions here
1.Why it works on my development PC and not in the server when deployed?
2.why the "Data Conversion Transtormation Editor" thinks the field is a Unicode string[DT_WSTR] if that field is a sum result from numerics fields in the oracle table
Thanks a lot!!! for any Idea
Salu2 Sergio T

Hello
Thanks for your time, I made a modification
to the package to redirect all rows
that cause error
All errors are rows with decimal values
such as "11.3" "33.44"
All values are using "," instead of
"." and that's the problem
what is strange is that the same source,
in both cases the same database
It will be something related to the
configuration of the oracle client on the Windows
server? The Oracle is in another server, a unix server.
I do not know much about oracle.
I know we use TSNnames for connecting, but I really don't know what to see, any idea??
thanks again for your time Jan
Salu2 Sergio T

I keep getting a message telling me that my message failed :network problem but only to one number that used to work fine, it is my sons number!

Could someone please help me with this it is driving me crazy here! I keep getting this message when I try to send my son a text! It says there is a network problem and the message failed. what do i do to correct this on my samsung galaxy note 4? It only happens with his number and I have tried all the trouble shooting help things and nothing works.

I'm very sorry to hear there is a error when texting your son. I'd like to help figure this out with you. Which phone does your son have? When did the error start? Does either device have any physical or liquid damage?
VanetrisC_VZW
Follow us on Twitter @vzwsupport

Get Info for Multiple Albums message (but only one was selected)

Please can someone help? I was so full of hope when moving from Windows to the Mac but my hope is rapidly turning to despair.
I have spent several hours putting many of my favourite music CDs into iTunes. All was going well, but suddenly when accessing the “Get Info” of a particular album in order to add Artwork I got a message like “Are you sure you want to get the information of MULTIPLE items” (my emphasis). (The error message may not be word perfect because I clicked the “don't show again” box and haven't seen it since.)
But the point is that I definitely did NOT have multiple items selected. There is nothing I can now do to select “Get Info” for a single album, and as a consequence I will never be able to add Artwork again when necessary.
I looked through the Internet and found references to the com.apple.itunes.plist. However although I can see this using Terminal I cannot find it using Finder! (Why not?)
What on earth is going on? This is no better than Windows, and in fact rather worse: I tried to delete iTunes, since it is obviously corrupted in some obscure way, with a view to re-installing it. But I can't even do that because it is “needed by Mac Os x”!!
Please can you help?

davidfrombucks wrote:
Please can someone help? I was so full of hope when moving from Windows to the Mac but my hope is rapidly turning to despair.
I have spent several hours putting many of my favourite music CDs into iTunes. All was going well, but suddenly when accessing the “Get Info” of a particular album in order to add Artwork I got a message like “Are you sure you want to get the information of MULTIPLE items” (my emphasis). (The error message may not be word perfect because I clicked the “don't show again” box and haven't seen it since.)
If you get info on an album, it contssts of multiple songs so it is multiple items.
But the point is that I definitely did NOT have multiple items selected. There is nothing I can now do to select “Get Info” for a single album, and as a consequence I will never be able to add Artwork again when necessary.
You still can get info for multiple items. Checking the Don't show this again box simply stops iTunes from telling you that you have selected multiple items. It will still get info and edit the info for multiple items.
I looked through the Internet and found references to the com.apple.itunes.plist. However although I can see this using Terminal I cannot find it using Finder! (Why not?)
Because by default, Finder searches do not show system files.
But the "problems" you are experiencing are not really problems (just not knowing how it works) and you don't need to mess with that file.

Quick pop-up window in thunderbird pop-up window says I have 5 messages, but only one was in the in-box.

I am using Thunderbird for Mac. A pop-up alert says I have message from so-and-so plus 4 others. Only so-and-so's message was in the in-box. What happened to the other four? Has this anything to do with the "Junk" status because whenever I received unsolicited mail I mark them as junk? Or is there any other reason?

In general, creating filters isn't necessarily a good way to fight spam. Check this article for more information on setting up your junk mail controls.
http://kb.mozillazine.org/Junk_Mail_Controls

[CS3 AS] Change text but only first instance

Hey there. So I'm trying to do a find / replace of a particular text string that I know appears multiple times within the document. Each instance of the string needs to be replaced by a slightly different string. The string being replaced is "Page #" and needs to be replaced by, for example, "Page 4" on first reference then "Page 6" on next reference.
So, I was trying to figure out a way to replace only the first reference and then iterate the same replacement command. Or if there's a more elegant solution like somehow being able to pass an array of replacements, that would be awesome.
Thoughts?

Sure. This is what it looks like in Javascript.
I use a GREP find to locate all number signs that are preceded with "Page " -- in this particular case, you want to find "Page #" but only change the hash mark. (And I missed a perfectly good opportunity to call it by its proper name "octothorp" ...)
The number of found occurrences must exactly match the length of the Replacement list, otherwise you get the wrong numbers at the wrong places -- therefore I added a check before continuing.
Notice I do the actual changing of # to number in reverse order -- this will always work correctly if you are replacing a 'contents' type of thing. The 'logical' way around, from front-to-end, messes up the found items list, because this points to locations inside the text, and if you insert two characters where there was one when it searched, the locations of all next items are off by one -- and so on.
Javascript requires one more thing: the text that is replaced, list[f].contents, is of a type "String", and it does not accept a number, which is what the replacements array contains. Hence the explicit conversion to "String" -- it might not be necessary in AS.
You can translate this to AS, and you can also simply use this Javascript (JS scripts work the same on both Windows and Mac ID). Fill the replacements array with the numbers you have and run the script. If you forgot or added a number, the script will notice this and exit; if you inserted a wrong number it'll never know ... so do check before and after running either Javascript or Applescript!
var replacements = [
     3, 1, 4, 1, 5, 9, 2, 6, 5
app.findGrepPreferences = null;
app.findGrepPreferences.findWhat = "(?<=Page )#";
list = app.activeDocument.findGrep();
if (list.length != replacements.length)
     alert ("Found "+list.length+" items, expected "+replacements.length+"!!");
} else
     for (f=list.length-1; f >= 0; f--)
          list[f].contents = String(replacements[f]);

Change image size (but only one value)

Is there a way to resize an image using Automator but only change one of the values? Example, I have images (.jpg) that are 1440x1080 but I want to change them to be1920x1080.
Dual 2.7 G5/ Dual 2.0 G5 Mac OS X (10.4.6) 30" Apple Monitors, Final Cut Studio

I am exporting a still image from a HDV timeline in Final Cut Pro. The problem is that the video originally is 1920 x 1080 but when you bring it into FCP it makes it 1440 x 1080. While editing, FCP makes the video look like the original resolution, but when a still is exported it looks smashed in from the sides. Bringing it in to Photoshop I just change the resolution from 1440 x 1080 to 1920 x 1080 the picture looks like the original video resolution. I offen times have several stills and I was looking for a quick way to change them quickly. I work with our police department and get various videos to make still images, then they email the pictures to other police agencies. Our countywide drug enforcement agency is going to get a new video camera and I think they should get a HDV camera, the stills from HDV is much better that from regular DV video.
Dual 2.7 G5/ Dual 2.0 G5 Mac OS X (10.4.6) 30" Apple Monitors, Final Cut Studio

SQL task fails calling procedure but only change was adding an insert

Similar Messages

Maybe you are looking for