SQL2008R2 RSClientPrint continual reinstall prompting...seprate instance of Reporting Services

I have this situation where users are continually prompted to reinstall the RSClientPrint for a SQL Server 2008R2 Reporting Services setup. The reporting services databases are on a clustered install, and the reporting services themselves are on a
separate server. I have found the following article that almost addresses this:
http://support.microsoft.com/kb/2295244
However, my question is does the involved cumulative update get installed on the box that contains the SSRS Installation, the box(es) that house the main SQL databases or both?
Also, it would be preferable to install ONLY the fix needed to address the actual issue if possible. When I peruse the cumulative update, I don't even see this issue mentioned in there and there are a whole lot of other fixes for problems we don't have
and this environment is very picky about what gets installed.
Any help would be appreciated.

Hi SiberianKhatru59,
The KB article have pointed out that this issue occurs because Internet Explorer is requesting the current build RSClientPrint.cab file, and we should install CU2 for SQL Server 2008R2 on the Report Server to update RSClientPrint.cab file.
It's hard to say the effects for your environment after install CU for SQL Server 2008R2, we recommnd you test the SP/CU on test/dev environment and then implement to production environment. If you don't have the test/dev environment, I would suggest opening
a case with Microsoft Customer Support Services (CSS) (http://support.microsoft.com), and perform the action under Microsoft
guidance.
Regards,
Elvis Long
TechNet Community Support

Similar Messages

SCOM 2012 Installation does not show the SQL Server Instance for reporting services

I have an issue when I try to install SCOM 2012 with the Reporting Server feature, so in the step that I have to select a SQL Server Instance I cannot do that, because as you can see in the picture no one option appears.
In my scenario I have a DCSERVER, SQLSERVER2008 R2, SCCMSERVER 2012 and in other server I are trying to install SCOM 2012. I are trying to use the same SQLSERVER to SCOM 2012.
Should I do other procedure on SQL Server before to continue? I will apreciate someone could say me what I need to do to resolve this issue.
Regards,
Paul Mendoza.

Hi Paul
Can you confirm that SQL Reporting Services is installed on the server that you are doing the install.
For a lab environment where you have SCOM Management Server, Web Server on one server and SQL Server on another you need to:
- run setup on the SCOM Server and choose NOT to install reporting. The install here will create the OperationsManager database and OperationsManagerDW (reporting) database.
- run setup on the SQL Server where SQL Reporting Services is installed. Then choose to install reporting. You should then see the SQL Reporting Services instance on the above window which is blank in your screenshot.
Take note of the warning in that window - SCOM uses its own role based security within SQL Reporting Services and this can break other reporting. E.g. you can't install SCOM and SCSM reporting (SQL RS component) together.
Cheers
Graham
New SCOM 2012 Blog! - http://www.systemcentersolutions.com/blog/
View OpsMgr tips and tricks at
http://systemcentersolutions.wordpress.com/

Can we configure a sharepoint integrated SSRS instance as reporting service in configmgr 2012 R2 ?

Hello Guys,
Can we install reporting services role a server hosting SSRS instance in share point integrated mode ?
Thanks,
Delphin.
Kindly mark as answer/Vote as helpful if a reply from anybody helped you in this forum. Delphin

https://technet.microsoft.com/en-us/library/gg712698.aspx#BKMK_SQLReportingServices "On the
Database page, verify that the Report Server Mode setting is configured by using
Native"
Torsten Meringer | http://www.mssccmfaq.de

Unable to find an Instance of reporting services

Hi,
I doing a fresh installation of MBAM 2.5 and getting error "Unable to find an instance of Reproting service" during check prerequisites page.
Actually my SQL is running in cluster on different machine not on the same machine on which MBAM going to install.
And I don't how to bypass this screen so that I can configure the DB parameter for MBAM.
Please advise.

Hi pawar,
Before starting the Microsoft BitLocker Administration and Monitoring (MBAM) installation, we must complete some prerequisites. One of the prerequisite is we must Install Microsoft SQL Server with SQL_Latin1_General_CP1_CI_AS collation. And SSRS must be
installed and running during the MBAM Server installation. Configure SSRS in "native" mode and not in unconfigured or "SharePoint" mode. Then the user should have the following SQL Server Reporting Services instance rights: Create Folders and Publish Reports.
According to the error message, it seems that you haven’t installed Reporting Services in the same server. Please refer to the article to install the MBAM 2.5 Server:
http://technet.microsoft.com/en-us/library/dn645331.aspx
Besides, since the issue related to MBAM. It is out of the support boundaries of our forum, I suggest you post the question in the following forum:
http://social.technet.microsoft.com/Forums/en-us/home?category=MDOP&filter=alltypes&sort=lastpostdesc. It is appropriate and more experts will assist you.
Regards,
Katherine Xiong
Katherine Xiong
TechNet Community Support

AxIS GPO, SSRS 2012 and RSClientPrint - Continues to prompt for install

Please help!
We have a prod server running SQL 2008 R2 SSRS and we are able to print SSRS reports fine. I believe RSClientPrint is part of the deployed image.
We now have a test server running SQL2012 SSRS. We have deployed a AxIS GPO which should allow a silent install of the new RSClientPrint for non-administrators. We went the AxIS route as I was told some security patches can require a new print
control so I want to avoid packaging, testing, and deploying updated print controls to thousands of machines.
The problem is that we are still being prompted to install the print control when attempting to print a SSRS report from the test 2012 server.
Has anybody seen this particular issue before? Do I need to make the ssrs server a trusted site?
Thank you for any help!!!! This is very frustrating.
David

Hi David,
Per my understanding that when you want to print the report from other server(SSRS 2012), you will got the prompt to install the print control, right?
Generally, each user who wants to use the print feature must download and install the ActiveX control that provides client print functionality. Depending on browser settings, the user may be prompted to install the control, be prevented from installing the
control, or have the control install transparently in the background.
For Microsoft Internet Explorer, settings that affect ActiveX control download and installation are specified through the
ActiveX controls and plug-ins node in the Security Settings page for the Web content zone. The following settings determine whether users can download and run the print control, based on Web zone security preferences:
Download signed ActiveX controls.
Script ActiveX controls marked safe for scripting.
Run ActiveX controls and plug-ins.
Users who want to use RSClientPrint to perform client-side printing must enable
Download signed ActiveX controls and Script ActiveX control marked safe for scripting for installation purposes, and
Run ActiveX controls and plug-ins for ongoing print operations. The
RSClientPrint ActiveX control is signed, meaning it contains a valid digital certificate from Microsoft.
Details information in article below for your reference:
https://technet.microsoft.com/en-us/library/ms155874(v=sql.105).aspx
If you still have any problem, please feel free to ask.
Regards
Vicky Liu
If you have any feedback on our support, please click
here.
Vicky Liu
TechNet Community Support

Uninstalling Reporting Services 2005 instance

Hi,
I'm trying to uninstall an old instance of SQL 2005 Reporting Services (x86) on a WS2008 vm but for some reason the uninstall crashes.
I am using programs and features to uninstall the SQL 2005 Reporting Services named instance. I get a message saying 'setup is preparing to make the requested configuration changes' and the setup then closes without any warning or error message.
Has anyone else had similar problems and does anyone have any ideas how to remove this instance of RS? If it's any help the corresponding SQL instance has been uninstalled so maybe thats confusing the setup program?
Many Thanks,
Phil

Hi phil,
Both the Installation Wizard and command line setup can be used to remove or modify an existing installation. Refer to How to: Uninstall an Instance of Reporting Services:
http://msdn.microsoft.com/en-us/library/ms143518(v=SQL.90).aspx.
In addition, I think you need to uninstall SQL Server 2005 manually. Follow steps:
http://support.microsoft.com/kb/909967.
BUG: You cannot repair or uninstall SQL Server 2005 Reporting Services after you uninstall and then reinstall Internet Information Services 6.0:
http://support.microsoft.com/kb/910544.
Hope this helps.
Maggie Luo
TechNet Community Support

Problem Re-Installing Creative Cloud - trying to uninstall and reinstall creative cloud bc of problems. encountering Error Code: 86 - "Another version of Creative Cloud desktop is currently running. To continue, pls quit that instance and click retry." No

trying to uninstall and reinstall creative cloud bc of problems. encountering Error Code: 86 - "Another version of Creative Cloud desktop is currently running. To continue, pls quit that instance and click retry." No other CC exists on my computer anymore. Advice?

If you are on MAC Open Activity Monitor and check for Creative Cloud, it it Running Quit it
MAC HD /Applications/Utilities/Activity Monitor
If you are on Windows check in task manager
Ctrl + shift + Esc keys

Using Proxy on Lion - Continually being prompted for username and password

I am looking at Lion in my studio setup at the moment and so far only a few things I am not happy with. One of these though is really annoying and in it's present form would stop me from using it in production.
I have setup the proxies in the Network tab as they are in 10.6.8 but I continually get prompted for my username and password. Not an issue if it was my machine and I would be using at home for instance but in the studio no. It could be anyone using the machine and some people do not have proxy access.
I do not want to store in the general network settings as a default username for the machine as there is not one. Is there a way of seeing what is trying to look out to the internet? Would little Snitch help here?
Dialogue box I would like to get rid of it the red ! one below, as the only way to avoid this is by typing in a user name and password into the Network Preferences settings
I do not mind this one below as it is usually only appears when you require it and not randomly during the day.

I have installed Little Snitch and left running for the day.
So far helpd is the main culprit, so is there a way of disabling this other than using little snitch?
If only Little Snitch, has anyone deployed to around 25 Macs so that the user doesn't really notice?

Can I dismount Drive E safely to free up space to continue reinstalling software

I have reinstalled all software back to factory settings. While reinstallation occurred, computer game me "Warning Low Disk Space". Can I condense programs so they don't take up so much space? or Can I dismount Drive E safely to free up 4 to 6 GB of space to continue reinstalling software, so that it doesn't crash?

thcato60 wrote:
I have reinstalled all software back to factory settings. While reinstallation occurred, computer game me "Warning Low Disk Space". Can I condense programs so they don't take up so much space? or Can I dismount Drive E safely to free up 4 to 6 GB of space to continue reinstalling software, so that it doesn't crash?
What you should've done is a complete format wiping everything clean to get all your space back. And then reinstall all your custom software back that way you will know for sure how much space you have. If you have one HDD I let windows do it's own factory recover wiping the complete drive clean and it will recreate the hidden parition again and that should get your system back running. But since we know nothing what laptop your asking about that makes it harder to know what is going on.
I am a Volunteer to help others on here-not a HP employee.
Replies aren't online 24/7 because of Time Zone differences.
Remember in this Day and Age of Computing the Internet is Knowledge at your fingertips if you choose understand it. -2015-

[Forum FAQ] The Reporting Server cannot be reinstalled on a same SQL Server Reporting Service instance

Symptom: Sometimes, when you want to reinstall the Reporting Server Role for Operation Manager 2012,
but you may encounter an issue that the Reporting Server Role cannot be reinstalled after you successfully uninstall it. When you check the System Center Operation Manager installation log, you can find the following error as shown in Figure 1.
Figure 1: Reporting Server Role cannot be reinstalled
It seems that the SQL Server Reporting Service has not been configured properly. When you open Reporting Services Configuration Manager to check the settings, the settings seem fine though.
Even you recreate Reporting Service Database, the error remains.
After reviewing the OpsMgrSetupWizard.log, we get the following errors when wizard try to connect to SQL Server Reporting Instance (Figure 2).
[07:24:05]: Error: :CheckHttpAddressResponse failed: Threw Exception.Type: System.Net.WebException, Exception Error Code: 0x80131509, Exception.Message:
The remote server returned an error: (500) Internal Server Error.
[07:24:05]: Error: :StackTrace: at System.Net.HttpWebRequest.GetResponse() at Microsoft.EnterpriseManagement.OperationsManager.Setup.ReportingComponent.CheckHttpResponseFromSRSUrl(String
httpSite)
Figure 2: Error Log -1
It indicates the Reporting Service encounters an internal error. The Website cannot handle the request. So you may check the Reporting Service log which is located in C:\Users\Administrator.SCOM2012\AppData\Local\SCOM\LOGS
and the following errors may be found (Figure 3).
library!ReportServer_0-18!1448!03/30/2014-02:53:23:: e ERROR: Throwing Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException:
Unable to load assembly Microsoft.EnterpriseManagement.Reporting.Security, Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException: The report server has encountered a configuration error. ---> System.IO.FileNotFoundException:
Could not load file or assembly 'Microsoft.EnterpriseManagement.Reporting.Security' or one of its dependencies. The system cannot find the file specified.
File name: 'Microsoft.EnterpriseManagement.Reporting.Security'
Figure 3: Error Log -2
Reason: After the Reporting Server is installed on a SSRS instance, the Reporting Server of SCOM
needs to modify the web.config and rsreportserver.config file to add its own assembly to make the Reporting Server work. But it does not change it back when Reporting Server is uninstalled. So the assembly cannot be loaded and the SSRS cannot respond
our requests.
Resolution: When the Reporting Server is installed, the old web.config and rsreportsserver.config
files will be backed up to web.config1 and rsreportsserver.config1. So you just need to change the files’ name back, then try to install Reporting Server of SCOM again. Everything would go smoothly.
Please click to vote if the post helps you. This can be beneficial to other community members reading the thread.

Hi AakashGhare,
According to your error message, SQL Server 2008 databases are version 655. SQL Server 2008 R2 databases are 661. When you are trying to attach an 2008 R2 database (v. 661) to an 2008 instance and this is not supported. As other post, once the database has
been upgraded to an 2008 R2 version, it cannot be downgraded. You'll have to either upgrade your 2008 SP2 instance to R2, or you have to copy out the data in that database into an 2008 database (such as using the data migration wizard).
In addition, if you want to use a Windows Batch file code and command to automatically login to SQL Server, detach database and attach a new one database, there is a similar details about batch code for attaching database to a new database, you can refer
to this article.
http://notesbyparth.wordpress.com/2012/06/29/run-sql-commands-from-windows-batch-file-or-attachdetach-database-automatically-using-batch-script/
Regards,
Sofiya Li
Sofiya Li
TechNet Community Support

Since upgrading to os x maverick, my FaceTime won't let me sign in and continues to prompt me to put in my iCloud password.

Since upgrading to os x maverick, my FaceTime won't let me sign in and continues to prompt me to put in my iCloud password. It sometimes asks me to put it in 5-6 times and then it gives me an error saying that the program certification is revoked or expired. I live overseas and previously utilized FaceTime to talk to my girlfriend.

Using FaceTime http://support.apple.com/kb/ht4319
Troubleshooting FaceTime http://support.apple.com/kb/TS3367
The Complete Guide to FaceTime: Set-up, Use, and Troubleshooting Problems
http://tinyurl.com/32drz3d
 Cheers, Tom

My Mac HD doesn't start up, I get the reinstall prompt and do not see a macintosh HD icon while starting up using option key

My Mac HD doesn't start up, I get the reinstall prompt and do not see a macintosh HD icon while starting up using option key.
When start up I land into the Mac OSX Installer. Has my LION crashed or the HD is not responding?

Try booting while holding down the Option key but make sure there aren't any disks in the optical drive first.
I just found this:
Select a startup disk *(on some computers)*
Option (To open the optical drive when choosing a startup disk, press ⌘-period.)
here. http://docs.info.apple.com/article.html?path=Mac/10.5/en/cdb_strtup.html
Carolyn

Outlook Anywhere Continues to Prompt for User Credentials

Hi,
Our Outlook AnyWhere clients continually get prompted to enter their user credentials while in Outlook. We've tested connecting to Outlook AnyWhere from the Internet and from our internal network. We're using Exchange 2007 SP3.

Hi,
Please run the following command to check the Authentication configuration for your Outlook Anywhere in Exchange 2007:
Get-OutlookAnywhere | FL
If the configuration is not correct, please run:
Set-OutlookAnywhere -Identity "E12-01\Rpc (Default WebSite)" -IISAuthenticationMethods Basic,Ntlm
In Outlook client, please configure to use Ntlm Authentication in the Connetions tab of Account Settings.
Regards,
Winnie Liang
TechNet Community Support

Firefox does not start up after an automatic update. Every time i try to open it, it just prompts the Mozilla Crash Reporter.

Firefox does not start up after an automatic update. Every time i try to open it, it just prompts the Mozilla Crash Reporter.
''Add-ons: {972ce4c6-7e08-4474-a285-3208198ce6fd}:3.6.10
BuildID: 20100914125854
CrashTime: 1290192405
EMCheckCompatibility: true
FramePoisonBase: 00000000f0de0000
FramePoisonSize: 65536
InstallTime: 1287124738
ProductName: Firefox
ReleaseChannel: release
SecondsSinceLastCrash: 422
StartupTime: 1290192405
Theme: classic/1.0
Throttleable: 1
Vendor: Mozilla
Version: 3.6.10
This report also contains technical information about the state of the application when it crashed.''
Same thing happens when i click restart.
No difference when i run it in Safe mode. And it won't let me create a new profile either. Is there anyway else i can extract my bookmarks? This is driving me crazy!

Did the crash reporter send any crash reports? 
You can see the crash reports in this folder:
"C:\Users\<user>\AppData\Roaming\Mozilla\Firefox\Crash Reports"
See: http://kb.mozillazine.org/Breakpad
See also [[Firefox crashes when you open it]]
Create a new profile as a test to check if your current profile is causing the problems. 
See [[Basic Troubleshooting#Make_a_new_profile|Basic Troubleshooting: Make a new profile]] 
There may be extensions and plugins installed by default in a new profile, so check that in "Tools > Add-ons > Extensions & Plugins" 
If that new profile works then you can transfer some files from the old profile to that new profile (be careful not to copy corrupted files) 
See http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox 
If that still causes the same problem then do a clean reinstall and remove the Firefox program folder.
* Download a fresh Firefox copy from http://www.mozilla.com/firefox/all.html and save the file to the desktop.
* Uninstall your current Firefox version and remove the Firefox program folder before installing that copy of the Firefox installer.
* Don't remove personal data when uninstalling.
* It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
See:
* http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall

Reporting services instance not able to connect from SSMS

Hi All,,
I have installed SQL SERVER 2012 on Windows 8.1. I configured report server in native mode.
* Reporting services is in started state
 * SQl server service is in started state
 * Sql serevr agent is in started state
 * SQL browser is in started state
When i tried to connect Report server instance using SSMS i got the below error.
TITLE: Connect to Server
Cannot connect to .
ADDITIONAL INFORMATION:
Unable to connect to the server at . The specified URL might not be valid or there might be a problem with the report server version or configuration. Specify a different URL, or contact your server administrator to verify that the report server runs SQL Server
2008 or later. Additionally, if you are trying to connect to a SharePoint-integrated report server, verify that SharePoint is installed on the server and that the report server uses SharePoint integrated mode. (Microsoft.SqlServer.Management.UI.RSClient)
BUTTONS:
OK
When i connect using http://localhost/reportserver I am getting below error
The permissions granted to user '' are insufficient for performing this operation.
Though i am the administrator
And when i connect using below URL http://localhost/reports
I get Unable to connect to the remote server
Please suggest your input on the problem

Hi Khushi N,
According to your description, you are administrator, when you tried to connect reporting services from SSMS, the error message occurred. When you tried to access report manager with the URL:
http://localhost/reportserver, you were prompted that the permissions granted to user '' are insufficient for performing this operation.
The Reporting Services error rsAccessedDenied occurs when a user does not have permission to perform an action. To troubleshooting this issue, please make sure that you have sufficient permission and the report server name is correct. You can use the reportserver
URL, e.g. HTTP ://<servername>/ReportServer, to log on the reporting service in SSMS.
In addition, by default, we could not access all of the report server properties available in SQL Server Management Studio unless we start Management Studio with administrative privileges. To configure Reporting Services role properties and role assignments
so you do not need to start Management Studio with elevated permissions each time, please refer to the following document:
From the Start menu, click All Programs, click SQL Server 2012, right-click Management Studio, and then click Run as administrator.
Connect to your local Reporting Services server.
In the Security node, click System Roles.
Right-click System Administrator and then click Properties.
In the System Role Properties page, select View report server properties. Select any other properties you want associated with members of the system administrators role.
Click OK.
Close Management Studio
The issue may be caused by the UAC or Internet Explorer security setting, please try to follow this steps:
1. Open the Internet options of the IE and add the report server URL into trusted site in the Security tab.
2. Run the IE as administrator.
For more information about Configuring a Native Mode Report Server for Local Administration, please refer to the following document:
http://msdn.microsoft.com/en-us/library/bb630430(v=sql.110).aspx
If you have any more questions, please feel free to ask.
Thanks,
Wendy Fu

SQL2008R2 RSClientPrint continual reinstall prompting...seprate instance of Reporting Services

Similar Messages

Maybe you are looking for