SQLDeveloper 1.1.0.21.41 can't see proc´s, functions on 8i

It was possible with 1.0 sqldeveloper.
I am in a migration project and i need to be able to connect to 8i and 10-2.
Do i will be able to do that in a very near future?
In other case the product is no longer useful for me.
Thanks.

I find what's a trouble!
I copied some additional libs to JBoss server/default/lib catalog: ojmisc.jar, adfmtl.jar and toplink.jar.
And I should start application from browseDepts.do page, not browseDepts.jsp!

Similar Messages

I can't see hyper threading function in my bios

I have a CPU celeron 2,4 ghz, MB 865pe neo2 LS. Problem is I can't see hyper threading function in my bios(ver. 1.5)

kowno,
I know Celerons are not ht cpu's but I want to know if that it's normaly or it's a problem with my MB.
thanks!!

Crystal Reports 2008 can't see/access ECC function module

My team is developing our first Crystal Report directly against ECC data and are experiencing the following problem:
Our ABAP team created a custom RFC to provide the needed data, but we are unable to see a full list of available Functions and list of available tables from SAP ECC data source.
We worked with Security and temporarily ran under SAP_ALL authority but were still unable to see/ access the function module. We have the integration kit installed and can see some function modules from within Crystal, just not the ones we need. Is there some trick to creating a function module so that it is visible to Crystal?
Environment Details:
Crystal reports Version- 12.2.3.467
SAP GUI # 7200.1.2.1051
CRDB_OpenSQL.Dll # 12.2.3.467

Hi Ingo. I enjoyed your BO 4 seminar and meeting you at ASUG/Sapphire. I was hoping you'd pick this up.
The connection options shows the info below. It doesn't seem to be telling us how to filter to either select or exclude SAP ECC function modules. It has options to? Are these options correct to see ECC function modules and should we be seeing other options?
Database tab (only tab in dialog)
- Show name description or both (Show description selected)
- Sort tables or fields alphabetically (sort tables selected)
- Select tables, views, system tables, synonyms, and stored procedures (all except synonyms selected)
- Table like and owner like (both blank)
Advanced Options (x = selected)
- (X) Use indexes on server
- ( ) perform grouping on server
- (X) Database Server is case sensistive
- (X) Select Distinct for Browsing
- ( ) Perform query async
- (X) Verify on first refresh
- ( ) Verify stored procedures on first refresh
- (X) verify when database driver upgraded
- (X) Automatic smart linking

How can I see if a function has been called in background task?

I tried to see sy-batch, but it doesn't work.
thanks
Gabriele

Try calling function module ID_OF_BACKGROUNDTASK.
DATA: lv_tid type ARFCTID.
CALL FUNCTION 'ID_OF_BACKGROUNDTASK'
IMPORTING
tid = lv_tid.
IF lv_tid IS NOT INITIAL.
* This was called with CALL FUNCTION ... IN BACKGRUND TASK.
ELSE.
ENDIF.

SQLDeveloper 3.2 - I can't see trigger code

Hi people
In some cases, I can't see trigger code.
I didn't find a pattern to determine what kind of trigger has an invisible code.
For example, in my instance I can't see code of SCOTT.AFTER_INS_UPD_ON_EMP trigger, but I see it in SQL tab for SCOTT.EMP table.
I had to copy from there and recreate trigger. Now is visible
I work with EBS R12, and a list of some triggers with that problem follows:
AR_RECEIVABLE_APPLICATIONS_BRI
AS_JTF_RS_GROUP_MEM_BI
FND_FLEX_VAL_RULE_LINES_T1
FND_FLEX_VALIDATION_RULES_T1
FND_SECURITY_GROUPS_IL
HR_LOCATIONS_ALL_OVN
PAY_TEMPLATE_EXCLUSION_RUL_WHO
PER_ALL_PEOPLE_F_OVN
PER_PERSON_ANALYSES_OVN
PER_PSV_OVN
WIP_DISCRETE_JOBS_BRD
My info:
SQL Developer 3.2.09.30
Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - 64bit
Thanks
Oscar

Hi Oscar,
Possibly your issue may be the same as this very recently logged and fixed bug:
Bug 14530780 - TRIGGERCODE IN OTHER SCHEMA NOT VISIBLE IN BROWSER, HOWEVER QUERIABLE IN SQLWORK
But the bug narrative never claims it is a regression, so presumably it also would have been a problem in prior releases.
Regards,
Gary

Can't see the output of cast/multicast

Hi, I can't see the output of cast/multicast.. but in sql*plus, i can..
regards

Hello, here's a sample...
ops$rringor@RLR9204> create or replace type
2 myarraytype as table of varchar2(2000)
3 /
Type created.
ops$rringor@RLR9204> drop table t;
Table dropped.
ops$rringor@RLR9204> create table t
2 ( id number not null ,
3 name varchar2(10) ) ;
Table created.
ops$rringor@RLR9204> begin
2 for i in 1..10
3 loop
4 insert into t values ( i, i||'abc');
5 end loop;
6 end;
7 /
PL/SQL procedure successfully completed.
ops$rringor@RLR9204>
ops$rringor@RLR9204> select a.id,
2 CAST( MULTISET( select b.name
3 from t b
4 where b.id = a.id ) as myArrayType ) as names
5 from t a ;
ID NAMES
1 MYARRAYTYPE('1abc')
2 MYARRAYTYPE('2abc')
3 MYARRAYTYPE('3abc')
4 MYARRAYTYPE('4abc')
5 MYARRAYTYPE('5abc')
6 MYARRAYTYPE('6abc')
7 MYARRAYTYPE('7abc')
8 MYARRAYTYPE('8abc')
9 MYARRAYTYPE('9abc')
10 MYARRAYTYPE('10abc')
10 rows selected.
I can see the records under NAMES but I can't view it using SQLDeveloper.

How can I see Calendar event END times at a glance?

How can I display my Calendar event titles exactly as I type them? I do not want Calendar to remove duration from the titles of my events. Otherwise I can't see event END times at a glance in month view; only start times. How can I "trick" Calendar to just show my titles as I type them - as I always could before I upgraded. I used to be able to enter "Seminar 9am-5:45" and it would appear that way regardless of how or what I chose to enter (or not enter) for duration.
I am running OSX 10.9.3.

It's a bit weird, but if you type in the time info TWICE into the event title then Calendar uses/deletes one of them to populate the event details and leaves the other.
Apple - Mac OS X - Feedback

Can not see any Data in OKE.OKE_K_FUND_ALLOCATIONS

I am looking in this table with SQLPlus and TOAD and can not see any rows.

Hi Hussein;
First I ran:
select fu.user_name, fr.responsibility_name
, fu.user_id, fr.responsibility_id resp_id
, furg.responsibility_application_id resp_appl_id, furg.security_group_id sec_group_id
from apps.fnd_user_resp_groups furg
, apps.fnd_user fu
, apps.fnd_responsibility_vl fr
where furg.user_id = fu.user_id
and upper(fu.user_name) = upper('&User_Name')
and furg.responsibility_id = fr.responsibility_id
order by 1, 3
Passing in SYSADMIN
Taking this row:
SYSADMIN,General Ledger Super User,0,20434,101,0
I ran:
I ran exec fnd_global.APPS_INITIALIZE (0,20434,101,0);
I still get no rows returned.
Is thier a way in the App to ensure the SYSADMIN,General Ledger Super User can see this data? Or am I missing something else?

Can not see historical data in Time Machine backup

Hi folks
First my setup:
   MBP Late2012
   Samsung Evo 840 SSD
   external USB 3.0 1TB as TimeMachine HD
   Mac OS X Mavericks
Now my problem.
After updating to Mavericks I've made a full backup with Time Machine.
Then I swapped the former 500TB HDD to the Samsung Evo 840 500TB.
A clean setup of Mavericks follows.
After that I restored the Backup from Time Machine.
Everything ok. Til now.
Because everthing works fine in the past, I did not control the Time Machine.
Today I wanna restore a File from my "Pictures" folder.
So I opened Time Machine.
Oops.
There I can only see the latest run.
Also in the timeline on the right side the only entries are TODAY and NOW.
I can not scroll into the past.
All windows behind the current window have a black titlebar.
In Mountain lion the titlebars are grey if there is data available
and the title contains the date of the backup.
What is the problem?
Is there a bug?
Did I something wrong?
Thanx in adv.
      Stoiker

Hi masong517
What a treasure trove of hints and solutions.
I didn't know this page.
But you are right with "E2".
This solved my problem.
Thank you very much.

Can not see the data in the grid

Hi,
nice to see the new features, but I can not see the the table inserts
in the data grid - the <data> rider is not clickable.
Regards

Hi annerose,
This problem has appeared in a few other threads. It's caused by installing Release 2 Raptor over Release 1 Raptor without first deinstalling Release 1 Raptor . So what you need to do is:
1) Back up any important Raptor files, e.g. connections etc.
2) Remove the existing Raptor Rel 1 installation folder
3) Install Raptor Rel 2
Hope this helps
ady

How do I change the icloud account on my iphone? I want to use the same account for all my apple devices (macbook air and imac and iphone). I can't see where I can amend the iphone account because it is in grey?

I want to use the same account for all my apple devices (macbook air, imac and iphone). I can't see how I can amend the iphone account because it is in grey? I also can't remember the password for this account so i can't even delete it and start again?
Help!
Thanks

Deleting an iCloud account only deletes it from the Device, not from iCloud. In iOS 8, the name of this setting changed to "Sign Out" as that is a better reflection of what actually happens. Your iCloud data remains on the server, available to devices still signed into the account, but the device you sign out of the account on is disconnected from the account, and as a result, the iCloud data from that account is removed from the device. It will redownload to the device should you sign back into the account.
The only issue you'll run into when you switch between accounts is with my photo stream photos older than 30 days. When you delete (or sign out of) and account, your photo stream photos are deleted along with the other data from the account in question. However, unlike other data which remains on the server and can redownload to your device when you sign back in, my photo stream photos only remain in iCloud for 30 days. When you sign back in, you will only get back my photo stream photos added in the last 30 days (as older photos are no longer in iCloud to redownload). Like other account data, any my photo stream photos on your other devices signed into the account are unaffected by this. If you want to keep older my photo stream photos on your device as you change iCloud accounts, save them to your camera roll before deleting (signing out of) the account.

My photos just became empty boxes, if I click on them they open, but I can't see them at a glance. Anyone know why? thanks

My photos on iphotos just became empty boxes, bordered by white intermittent lines. If I click on a photo it comes up, but I can't see what each photo is at a glance. Any ideas how to resolve this? thanks

Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Include the options to rebuild the thumbnails.
Regards
TD

I have multiple devices in my family. Each of us has an iPhone and an iPad. Is there a way for each of us to have our own Apple ID but one account so we can all get the same music, movies, books, etc. I can't see paying twice for something in the same fam

I have multiple devices in my family. Each of us has an iPhone and an iPad. Is there a way for each of us to have our own Apple ID but one account so we can all get the same music, movies, books, etc. I can't see paying twice for something in the same family.

Welcome to the world of digital media. Your can't really transfer it. I don't know what the rules are about transferring to your spouse but I do know that in some cases when you die, your heirs cannot inherit your digital media. This is why there is still an advantage to buying the CD since the usage rights belong to whomever holds the physical media.
A possible workaround is to burn the songs to a music CD with yout account (tracks only without song titles) and then having your wife upload it as a regular music CD onto her account. It's been a while since i've done this so I'm not sure if it would work now.
Please note that I'm not advocating copyright and/or TOS violations. I'm only suggesting ways to copy music for your own personal use which has traditonally been permitted. I only did this because I wanted to convert iTunes songs to mp3 files so I could burn them onto a data CD for use in my car. It would make sense that since married couples are a joint entity, this would be personal use.
Also, I'm not a lawyer so don't take this as legal advice.

Can you see a image in the Get Info Window?

After upgrading to Mt LIon and while using CS6, I can't see image previews in the Get Info window. Can't see images in the upper left corner of the get info window, so I can't make a selection and then do a copy- paste like I could do before I upgraded to Mt Lion with CS6. I want to be able to paste a image of the subjects in my folders.. IE folder of Panda Bears would have a image of a Panda showing on that folder. Folder of The Great Wall would have a image of the Great Wall on the Folder of Great Wall pictures. This has always worked for the past many years I have used a Mac and Photoshop. I started with Photoshop 2. All my photo folders are represented by images so I have a good idea of what is contained in each folder. Now after 2 weeks in China, 20 folders are represented by 10-11-12, 10-12-12, 10-13-12, 10-14-12 and so on. Shows me nothing but dates. I have tried saving as Jpeg, Tiff, and PAD, and still can't do a copy-paste in the Get Info window. Apple says it is a Adobe problem, Yesterday Adobe told me it is because I am uusing a Nikon D800 and Adobe does not have a patcdh for the NEW Nikon camera. I then tried using my Nikon D2Xs, Nikon D3X, Nikon 800 and even my wife's D50 and none of these camera allow me to copy paste the thumbnail image to the clipoboard like I have been able to do for YEARS... I can see images in a folder in Bridge, but the images dont show in my desktop folders.IE, a folder on my desktop with 200 pictures only show with words/ numbers/letters NO IMAGES appear in the folders on the desktop. On some folders the folders in a folder don't show up as Folders either.
Can Any one help me. Same thing happens on my MACPRO w 16 GB Ram and on my 17" MacBook Pro.

Allan Sicks wrote:
Thanks for your input. Problem might be with the EASTER BUNNY..... have to have someone to blame.
I can't blame you for saying that.
Adobe is the clear owner of the responsibility to make functional their product that they claim is compatible with your operating system. Adobe is the one who sold you the product.
I just went looking for what Adobe has said about Mountain Lion compatibility, and they both list Mountain Lion as compatible and include such language as that on this page (emphasis mine):
Adobe and Apple have worked closely together to test Adobe® Creative Suite® 5, 5.5 and CS6 editions and individual products for reliability, performance and user experience when installed on Intel® based systems running Mac OS X Mountain Lion (v10.8). Earlier versions of Adobe Photoshop® (CS3 and CS4) software were also tested with Mountain Lion and there are currently no known issues.
I suggest that Adobe needs to get on the ball and get this fixed. The time for user patience is over.
If someone from Adobe is saying "Adobe can't fix it" then that someone is at the wrong authority level and/or is thinking on the wrong level.
This is business and the business is making products that have value and are sold to people who perceive that value. Adobe doesn't get to keep selling products that don't work while standing on principles that "it's someone else's problem". Customers don't care why it doesn't work.
It's obvious to a child that if Photoshop CS5 can write the proper things to the Apple OS so that the thumbnails are visible, that there's something Adobe could do to fix it.
But EVEN IF this were something only Apple could fix, that Apple hasn't fixed it yet says pretty loudly that Adobe isn't making the right overtures to Apple for their mutual benefit. Adobe, are your executives so greedy that they can't grease a few palms of their friends over at Apple to put some priority on this? What's the problem here? Has Adobe actually forgotten how to do business?
-Noel
P.S., You should know that I don't use a Mac and am personally having no issues with seeing proper thumbnails and previews on my Windows 7 and 8 systems, since the software that does that isn't from Adobe.

On my ipad 2 I can't "see" the hundreds of spoken audio tracks that are in my itunes and on my ipod touch. Is there something I didn't do during sync up?

On my ipad 2 I can't "see" the hundreds of spoken audio tracks that are in my itunes and on my ipod touch. Is there something I didn't do during sync up? The tracks are from voice recordings that were downloaded from an extrernal drive and weren't necessarily tagged as spoken audio. Do I need to go back into itunes and relabel these tracks so they will show up on my ipad2?
Thanks in advance for your help!

With the iPad connected to the computer, while iTunes is running, click on the iPad name on the left side under devices. Click on the Movies tab and look for Movie Rentals. You want to "Move" the films to the iPad.

SQLDeveloper 1.1.0.21.41 can't see proc´s, functions on 8i

Similar Messages

Maybe you are looking for