SQLdeveloper 4 - Navigating packages in connection window doesn't work

Hi
Can't navigate (large ) packages in connection window.
It was possible in version 3.2. by clicking funtion/procedure name.
Now I have to scroll the package or search for the function-name.
regards Karsten

This is a known issue and will be addressed for the next update.

Similar Messages

I updated my iphone 5 to ios 6.0.2. my wifi says its connected but doesn't work now. It doesn't matter what wifi network I connect to. It worked before updating my phone. I can no longer use facetime or use wifi at all. I'm not sure what to do to fix it.

I updated my iphone 5 to ios 6.0.2. my wifi says its connected but doesn't work now. It doesn't matter what wifi network I connect to. It worked before updating my phone. I can no longer use facetime or use wifi at all. I'm not sure what to do to fix it.

I'm having similar issues with my phone. I got my first iPhone recently, only had an iPod touch gen4 for a little over a year. Updated to 6.0.2 when we got the phone (iPhone 5) a few days before Christmas. When I got home on the evening of January 11, my phone would not connect the router anymore. I was able to get it to connect after resetting the phone and the router, updating the router, and manually connecting. That laste for a few minutes and then wouldn't work anymore. I live in an area with very limited service, we have a network extender installed to help, and I am barely getting a 3G signal at times.
My wife's iPad 4, my touchiPod 4, and all of our laptops are working just fine on the router. When I dropped my kid off at school today, I noticed that I am not even seeing the school network anymore from the parking lot where before I got 3 or 4 bars and could connect to their wifi when I was there. Today my phone goes back and forth between seeing my home network but not connecting, to not even seeing the network at all even from the same room that the router is in.
Hope Apple fixes this problem soon..............

Do I need to install boot camp on Windows 7 as well as on Lion? I already installed it some years ago on Leopard when installing Windows Vista on my Macbook Pro. But now after installing Windows 7, many things in windows doesn't work (sound etc.)

Do I need to install boot camp on Windows 7 as well as on Lion? I already installed it some years ago on Leopard when installing Windows Vista on my Macbook Pro. But now after installing Windows 7, many things in windows doesn't work (sound etc.). I made a clean installation because I needed to go from 32 bit to 64 bit.
Or should I just update bootcamp in Lion? (cause when I search for "boot camp" in Windows 7 there's no result)

Installation Guide
Instructions for all features and settings.
Boot Camp 4.0 FAQ Get answers to commonly asked Boot Camp questions.
Windows 7 FAQ Answers to commonly asked Windows 7 questions.
Apple Boot Camp Support
Lion's Boot Camp Assistant 4.x should have downloaded Apple drivers as part of also partitioning.
You need Apple drivers. And you then need to add on your own audio driver.
You can run Assistant at any time to download and save a set of drivers.

After a long in "stop" period, the internet connection (ethernet) doesn't work. before updating to mountain lion this problem didn't exist.

after a long in "stop" period, the internet connection (ethernet) doesn't work. before updating to mountain lion this problem didn't exist.

Gave up on the GUI. This script derived from http://blog.netnerds.net/2012/07/os-x-how-to-setup-nat-on-lion-and-mountain-lion / seems to work for me:
gwdev=en0 # This is my WiFi connection (has Internet connection)
targetdev=en1 # This is the USB to Ethernet adapter (to give Internet connection)
/sbin/ifconfig $targetdev down
/sbin/ifconfig bridge0 create
/sbin/ifconfig bridge0 up
/sbin/ifconfig bridge0 addm $gwdev
/sbin/ifconfig bridge0 $HOST_ADDR
/sbin/route add default -interface bridge0 -ifscope bridge0 -cloning
/usr/sbin/sysctl -w net.inet.ip.forwarding=1
/sbin/ipfw add 100 divert natd ip from any to any via $gwdev
/usr/sbin/natd -interface $gwdev -use_sockets -same_ports -unregistered_only -dynamic -clamp_mss -enable_natportmap -natportmap_interface $targetdev

Quicktime for windows doesn't work, wont let me uninstall or update.Help!

Quicktime for windows doesn't work, won't let me uninstall (tells me fatal errro) or update (tells me it encountered an error on installation). Help!I am running Windows XP on an Intel pentium PC. Any ideas? Dvora

When you get this fatal error uninstalling, try a full removal of iTunes and related programs with an installer clean up of any that do not uninstall cleanly:
Here is a method:
Download a fresh copy of iTunes and the stand alone version of Quicktime (the one without iTunes)
http://www.apple.com/quicktime/download/win.html
http://www.apple.com/itunes/download/
Download and install Microsoft Installer cleanup utility, there are instructions on the page as well as the download. Note that what you download is the installer not the program – you have to run it to install the program.
To run the program – All Programs>>Windows Install Cleanup
http://support.microsoft.com/kb/290301/
Now use the following method to remove iTunes and its components:
XP
http://support.apple.com/kb/HT1925
Vista
http://support.apple.com/kb/HT1923
*If you hit a problem with one of the uninstalls don't worry*, carry on with the deleting of files and folders as directed in the method.
When you get to deleting Quicktime files in the system32 folder as advised in the method, you can delete any file or folder with Quicktime in the name.
Restart your PC.
Run the Microsoft Installer Cleanup Utility. (Start > All Programs > Windows Install Clean Up)
Remove any references you find to the programs you removed - strictly speaking you only need to worry about those programs where the uninstall failed.
If you don’t see an entry for one of the programs that did not uninstall, look out for blank entries or numeric entries that look like version numbers e.g. 7.x for Quicktime or 1.x for Bonjour.
restart your PC
Install the stand alone Quicktime and check that it works.
If it does, install iTunes.

Camera Connection Kit doesn't work

Hi,
In 2012 I bought 2 cases for Hyperdrive for my 2nd genreration iPad. I got drives for both, formatted and used with my iPad with the iPad-USB camera connector (only). All worked fine.
Both Hyperdrives went back in their cases and put in the closet 8 months ago and were taken out today for a test run. Both will turn on and import photos perfectly well. Neither will establish a connection to my iPad. I initially assumed that I might have a faulty cable and tried a second one that I know is goo, but it too works with neither unit. As a test of the Hyperdrive units, I tried connecting to my MacBook Pro. Both work and allow me to see my images in Lightroom.
Additionally, until today I had never opened the package that the iPad-SDHC card connector (that originally came with the iPad-USB connector) was in. It, too, will not work with my iPad with a good SDHC card in it. My iPad charger works perfectly well, so I don't think it's the receptor in my iPad. Until I tried the iPad-SDHC card connector I was beginning to assume it was the iPad-USB connector but I find it odd that a second connector, too, does not work.
I get no error messages. Simply, nothing happens at all. Any ideas?
Thank you.
Stephanie

By the way, I have turned the iPad off and back on; I have reset it.
I have checked and the images are in a DCIM folder. Each image (they are raw images) has an 8 letter/digit name followed by .raw format code for camera. Camera is a Panasonic micro four thirds camera. I've just tried a card from my Canon point and shoot with both RAW and JPEGS on it. That doesn't work either.

Keyboarding password CDE window doesn't work

I don't manage to enter the password in the password window of CDE.
The password I type is the good one, it seems to be a keyboard issue, it is locked.
Is it possible to kill this CDE console and start it again.
To be more specific, this CDE is launched on the system console.
Thanks for your help

By default the router will use admin for either the password only or for both username and password. If it doesn't work you might have changed this before when you ran the setup cd the first time. Is the cisco connect software installed in the computer? You can check thru cisco connect what the router password is. Just go to "router settings" then check what the router password is. With cisco connect, your network password (wireless security key) is the same as the router password. Otherwise you'll have to reset the router for 10 seconds and it will goback to the default "admin" password or you may run the setup cd again.

Popups: Navigation from view to window does not work

Hi,
I open a second window as popup. This window has 2 views embedded, displaying view1 first. On some actions I would like to navigate to view2.
Defining an outbound plug on view1 and an inbound plug on view2, connecting them and firing the outbound withith the onaction works absolutely fine.
However, for some reasons I would like to avoid a direct navigation, but would like to navigate from view1 to the popupo window and from there to view2 (or maybe another view, ofcourse also embedded in the same popup window). Unfortunately I fail on this scenario - I can fire the view-to-window plug, but the destination on the window side (handle in method) is never reached.
Since the same concept works fine on non-popup windows I wonder whether a navigation from view to embedded window does not work for popups?
Any idea?

Hi Yashpal,
no, just one window.
The first link is view1 -> window, the second window -> view2.
I.e., I fire in the view the outbound plug, which is connected with its window.
In the window I fire an outbound plug, which is connected to view2.
In theory this should work - for non-popup windows I do not have any problem at all, however, for popup windows the navigation from view1 to the window is not processed.
In the meantime I played a little bit further: Instead of firing a navigation from view1, I now fire an event defined in the component contoller, on which an event method is registered within the window. Doing so, I reach the window, which I didn't reach via the navigation link. Once in the window, firing to view2 works just fine ...
Hope the issue is a bit clearer now. Also I found a solution, I am surprised that the simpler way via navigation does not work.

When I move a harddrive with Bootcamp from my mac pro to my macbook, windows doesn't work

I have a 13" Intel Core 2 Duo MacBook and the topcase-keyboard doesn't work and so for some reason, it makes it impossible for me to install windows on the bootcamp partition. While the windows installer is running, it doesn't recognize usb keyboards. So I decided to install windows 7 professional on that same drive using my Mac Pro. The installation worked perfectly.
Then I take that harddrive and I move it back to my MacBook and windows won't start up correctly, stating that something has changed (of course!...duh).
Can anyone help me with a workaround for this?
Has anyone had similar problems moving a windows partition in bootcamp from one mac to another?
How can I install windows on a MacBook without a working topcase?
I've posted this question to the Snow Leopard community because that's the OS I'm using.

With the Lion it is essentially unnecessary to resort to external driver disks. What's more, most of those disks are incompatible with the OS and should not be used. The system already carries a wide variety of printer description files (aka PPDs, which is what modern printing systems use as "drivers") for a lot of brands. And there was an HP printer update just two days ago.
Just checked in mine and did indeed find that the HP OfficeJet 6200 Series, with or without Fax, is covered with the latest update.
So just go thru the motions of creating a proper printer instance:
Make sure the Mac "sees" the printer on the network.
System Preferences / Print & Scan
Click on the + button on the left column
Select the appropriate type of printer, will use IP for the rest of this
Select HP Jetdirect - Socket, default for HP network printers
Type the IP address or look it up
Name the printer for easy identification on the print dialog
Let the Mac identify the printer model or manually choose the driver
Click Add.
Once the instance pops up in the list, can click on Options & Supplies for further config.

After upgrading to Mountain Lion, Windows doesn't work

Hello,
I've just upgraded my computer to Mountain Lion (from Leopard) and Microsoft windows 'the Power PC applications are no longer supported'. I've tried to download different version of Microsoft windows - still doesn't work. Help!?
I'm aware that this question may have been posted but somehow can't access the main community room.
Thanks
Odyle

You can't run Windows on a Mac unless you use BootCamp or a third-party utility such as Parallels Desktop.
Perhaps you mean Microsoft Word (which is part of the MSOffice suite).
Only MSOffice 2008 and later will run in Mountain Lion.
However there are very good free alternatives, such as LibreOffice.

Locate file window doesn't work

Ok, this problem occures only on our Z800 workstations.
Everything works as expected on my laptop.
When I try to relink a media file, the relink media window opens, and then I click the Locate button.
The new window ALWAYS opens in the top most level (basically My Computer in windows) and not in the last used directory.
I think it has something to do with the second problem - the path text box doesn't work. Whatever I enter there and click Return - nothing happens. It doesn't navigate to the folder specified in the path field. The only way to navigate is to go throught the folder tree on the left.
For every file I have to do it always from the top most level - that is a lot of clicking.
Also if I uncheck Use Media Browser to locate files, the default windows dialog properly navigates to the last known location of the file.
I know it's an error - since on my laptop everything works fine. The window opens in the last know location of the media file and I can easily navigate using the path field.
Any suggestions what could be the reason for this?

Jim Simon wrote:
I'm not sure if this is a bug. The Locate File dialog seems to be opening where it thinks the file might be, rather than where it was. For example, I renamed the 0000.mts file for a particular project, and when I opened Premiere Pro, Locate File went to the 0000.mts file from another project/folder, thinking that might be it.
So...if you have no other files that might be the missing file, the dialog starts at the top.
Jim,
I understand what you are saying in regard to where it thinks it might be. However if I manually type a path where a file I want to link to rathter then clicking 20 times in the folder tree, it throws a "File not accessible" error. Yet if I use the folder tree to navigate to the same file it sees it and links to it fine.
It just seems that whenever I try to manually type a path in the path address field is when the error occurs.
Are you able to manually type in a path > hit enter/return and have it link to the file?

Burned in Nero Express through Windows, doesn't work on Mac

So I just burned a Data DVD (files like music and mac applications) on Windows, using Nero Express, but then I mount it on my Powermac G5 PPC and it doesn't work, my mac doesn't recognize it, what's the problem ?
Thanks.

Did you close the disc, or leave it open for further burning sessions?

Wifi shows connected but doesn't work

My iPhone 4 shows that it is connected to my home network, but the wifi doesn't work. I know that the router is working because another computer on the network is working fine.

Try following:
Delete the WiFi network from your iPhone.
Disconnect the WiFi router from the power cord, let it be a few minutes, then reconnect.
Reset the iPhone by holding the Power button and the Home button at the same time, keep holding, ingnore everything on the screen, until you see the white Apple logo, then let go and let the iPhone restart. Set the WiFi t on and put in the password.
That should do it.

Networks connects, but doesn't work

I work at a hospital and one of our patients has a macbook. We setup a wireless account for him and he connects fine (Sees cisco wap/gets correct ip address), but he can't get to anything. His email client hangs and Safari never connects to the web. I tried pinging, but even that doesn't work. Turning off the enthernet port didn't help. Any suggestions are greatly appreciated.

I work at a hospital and one of our patients has a macbook. We setup a wireless account for him and he connects fine (Sees cisco wap/gets correct ip address), but he can't get to anything. His email client hangs and Safari never connects to the web. I tried pinging, but even that doesn't work. Turning off the enthernet port didn't help. Any suggestions are greatly appreciated.

HTTP Connection KeepAlive doesn't work!

Hello, 
 
why the KeepAlive-Feature (reusing of TCP-connections, described at http://java.sun.com/j2se/1.5.0/docs/guide/net/http-keepalive.html) doesn't work in the following example? I'm using J2SE 1.4...
 
 
 import java.net.HttpURLConnection;
 import java.net.URL;
 
 public class Test {
 
 public static void main(String[] args) {
 try {
 for (int i=0; i<5; i++) {
 URL url = new URL("http://www.sun.com/");
 HttpURLConnection conn = (HttpURLConnection) url.openConnection();
 conn.setRequestMethod("GET");
 conn.connect();
 conn.getContent();
 conn.disconnect();
 }
 } catch (Exception e) {
 System.err.println("Exception: "+e.getMessage());
 }
 }
 
 }
 
 
 
I've checked with Ethereal (http://www.ethereal.com), that 5 different TCP-connections are used, when this example runs.
 
Where is my mistake??
 
Does KeepAlive works with MIDP 1.0?
 
 
Slavik

may be conn.disconnect(); is closing the underlaying connection.
Also try putting "Connection: keep-alive" header to the request

SQLdeveloper 4 - Navigating packages in connection window doesn't work

Similar Messages

Maybe you are looking for