SQLDeveloper not pulling entire tnsnames list
I just installed SQLD 1.0 on my WinXP Pro machine. I have 2 oracle homes, c:\orant and c:\orant_wf. My default is set to c:\orant. I have set TNS_ADMIN var to point to c:\orant\network\admin. The 2 files are exactly the same. I only have these 2 tnsnames.ora files on my machine.For some reason, I do not see the entire list of entries from my tns file. What do I need to do to get the entire list populated in the tns tab of SQLD. Thanks in advance.
Shree
Appreciate your reply. I checked out my tns file and the entries in SQLD are missing a whole bunch of entries that I currently use with sql nav or plus. I checked the format for a couple of the missing entries and they don't seem to be a problem. SQLD's list starts off with the same list of the entries in the beginning of my tnsnames file but after about 20 of them it picks up 1 entry way near the end (bypassing entries that I currently use). Any ideas?
Shree
Similar Messages
-
CS6 not seeing entire font list
The machine is an older mac running OSX 10.6.8.
Both Illustrator CS5 and CS6 are installed (have been for years).
This morning, CS6 sees only the top half of the font list. Everything below is blank. It scrolls as if other entries are there, but the screen is blank and there is nothing to select.
CS5 still sees the entire font list.
I have:
Closed and reopened the program (no change).
Run Font Nuke to clean the cache files.
Rebooted (several times -- still no change).
My question;
Short of uninstall > run cleaner tool > reinstall, is there anything else to try?
--OBOB,
Here is the long list (apologizing for my posting it again, I believe you know it).
The following is a general list of things you may try when the issue is not in a specific file (you may have tried/done some of them already); 1) and 2) are the easy ones for temporary strangenesses, and 3) and 4) are specifically aimed at possibly corrupt preferences); 5) is a list in itself, and 6) is the last resort.
1) Close down Illy and open again;
2) Restart the computer (you may do that up to 3 times);
3) Close down Illy and press Ctrl+Alt+Shift/Cmd+Option+Shift during startup (easy but irreversible);
4) Move the folder (follow the link with that name) with Illy closed (more tedious but also more thorough and reversible);
5) Look through and try out the relevant among the Other options (follow the link with that name, Item 7) is a list of usual suspects among other applications that may disturb and confuse Illy, Item 15) applies to CC, CS6, and maybe CS5);
Even more seriously, you may:
6) Uninstall, run the Cleaner Tool (if you have CS3/CS4/CS5/CS6/CC), and reinstall.
http://www.adobe.com/support/contact/cscleanertool.html -
My Iphone 4 crashed and I lost my entire contact list. I restored it to original factory settings but in trying to restore my data from my laptop via Itunes.. this was the feedback: Itunes could not restore the Iphone Dr Johnny Siu Chong because the Iphone refused the request.
I cannot get help from Apple support because i am being asked to supply the serial number which is stored on the phone and I cannot restore my data in the first place. I am reluctant to "Set up as a new Iphone" since I don't know whether if I do I may not then be able to access my data from Itunes...
Please advise what to do. I did not see any tutorials on Youtube to help me with this.
I look forward to an early response.Hey joshuafromisr,
If you resintall iTunes, it should fix the issue. The following document will go over how to remove iTunes fully and then reinstall. Depending on what version of Windows you're running you'll either follow the directions here:
Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
http://support.apple.com/kb/HT1925
or here:
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
http://support.apple.com/kb/HT1923
Best,
David -
What the h*** happened to Live Updating of smart playlists in iT 11? I have several smart lists that pull from larger lists based on how recently a song has played. Not happening now. The whole library only updates "last played" for about 1 in 20 songs. This is really screwing up my lists that I use as backgrounds for a lot of activities in my classroom at school.
FYI, I've found that Live Updating can SORT OF work. It seems if you only have two rules, live upating works (IE, I have one that is a Rating must be 3-5*'s and last played cannot be within the last 8 weeks). Once the song is played it disapears off the playlist. BUT, as soon as I try to add a third rule, it doesn't work anymore! This is unfortunate because two rules really limits the ability of the playlist...
Cheers, -
How do I delete stored email addresses in my iphone? When sending photos, I don't want to have certain email addresses "popping up" from the internal memory, I've deleted my entire "Contact" list but they still appear. Help please!
As with the Mail app on a Mac, the iPhone's Mail app stores all email recipients in a list of previous recipients which is separate from the address book or contacts. The email address autofill feature when addressing an message pulls from Contacts and from the list of previous recipients.
Different from the Mail app on a Mac, there is no access to the list of previous recipients with iOS on an iPhone, iPod Touch, or iPad to remove a previous recipient from the list, or to add a previous recipient to the address book or contacts that is not already entered - not at the present time anyway.
The only way to purge the list of previous recipients at the present time is by restoring your iPhone with iTunes as a new iPhone or not from your iPhone's backup, which will start being re-populated again with every sent message. -
Example: Eminem 'Encore' has multiple artists on the entire track list. Several songs will just list Eminem as the artist, but a lot will have Eminem, FEATURING...so and so. Each song that has "FEATURING" shows up as a different album, so if you are not paying attention, and pull all the songs from a particular album over to your ipod, for example, and you don't see that not all the songs are there, you won't get them all to transfer.
Is there anyway to correct this?Each tune gets a file name - that is how iTunes works. iTunes is a data base manager.
In a PlayList a reference is created that will link to a specific tune.
You can take the tunes that you do not want listed under a particular album name and change the album name using 'Get Info' for that tune(s) from the iTunes window.
MJ -
Since updating my IPhone 4 to IOS 6, I am unable to pull up the list of Purchased apps under the Apps/Updates. I suspect I am too low on RAM to load the entire list of purchased apps. Any solution?
Hi Urs
I searched a lot and maybe found a part of the reason for this high data traffic.
I'm synchronizing my contacts, calendar & reminder with iCloud & my mail with Hotmail.
When push is activated for Hotmail, that doesn't matter, but when push is activated for iCloud, the amount of data nearly explodes. So I turned iCloud to manual and let Hotmail on push.
Contacts, calendar & reminder are synchronizing when opened (I think this is enough).
Also I do a backup on iCloud and than I deactivate the function (I do not delete the last backup, I only deactivate the option for automatic backup).
It seems, that the backup functionality also generates traffic when not on WiFi - especially at night!!
The battery life has been getting better, when I deactivated the support for automatic time zone changes (location services were always on).
The battery finaly got MUCH BETTER since the update on iOS 5.0.1.
My traffic is actually higher than on iOS 4 but not so high as before I deactivated some services...
I hope this info is a little help for you!!
Let me know if this works for you, ok?
Best regards,
Wolfgang -
Refresh PL/SQL Report Region (not Page) using Select List value
Hi,
I've got a report region based on a 'PL/SQL function body returning a SQL query'which gets generated on selecting a value from a Select list item, The Select List action is 'Redirect and Set value' but this causes the whole page to refresh rather than just the report region. I've tried to refresh the report only using a dynamic action on the Select List item (Action now reset to 'None') but now the report is not appearing on choosing from the List. Can anyone suggest a solution that will allow me to refresh this report without refreshing the page? I am using APEX 4.2.2 and the report syntax is as follows:
DECLARE
v_statement VARCHAR2(500);
BEGIN
SELECT query_text
INTO v_statement
FROM sql_queries
WHERE query_id = :P2_QUERY ;
RETURN v_statement ;
END ;
where P2_QUERY is Select List Item,
regards,
Kevin.KevinFitz wrote:
The report region being displayed is conditional on P2_QUERY item being NOT NULL. I assume the region not appearing is because the Action for the Select List Item is set to None and so P2_QUERY is always NULL.
No, the region is not appearing because it is conditional on P2_QUERY being NOT NULL. This means that the report region never exists on the page shown in the browser, so it can't be dynamically refreshed. (Dynamic refresh doesn't evaluate region conditions, and it only re-renders the report content, not the entire region.)
Remove the condition on the report region, check the refresh is working, then reconsider exactly what the requirements here are. If you want the region to appear only when P2_QUERY has a value, and you want it to be refreshed without submitting and re-rendering the page, then the region needs to be hidden rather than conditionally rendered, and shown via a dynamic action when P2_QUERY gets a value.
I tried adding an additional Set Value True Action for the DA event but got an error as listed above,
All irrelevant if Page Items to Submit on the region is used properly. -
How do i get an e-mail or coupon that does not print entirely on the page .moved to fit on the page
How do I get an e-mail or couponthat does not fit entirely on the pqge moved tofit onthe page
I Finally resolved my problem after much research. On my I pad 4 with retina in the field under settings there is a list to choose from-- ex. Aol,Google, yahoo, etc. I chose other and entered att. Used pw and bingo! Problem resolved. It is somewhat configured a little different; but at least I can get all of my 500 e mails.
apple takes IMAP but this is under pop And at least my persistence paid off. You would think something so simple would be informative to us in a better way. -
I am using Office 2011 on a new Mac. I can no longer access my entire contact list when clicking TO/CC/BCC to select several contacts for sending an email. I am so surprised & disappointed at the many difficulties, conflicts, & lack of features on the Mac (Lion 10.7).
Hello,
Are you using Apple Mail or MS Office Outlook for your email program? It has been a know issue for some time now that MS Office 2011 Outlook does not sync contacts with Apple's Address Book. This was true under Snow Leopard as well as in Lion. It worked well when I had Entourage (MS Office 2008) in Snow Leopard but once I switched to Outlook 2011, the sync stopped.
Did you just start using Outlook 2011 or has this happened after you move to Lion? Perhaps you could import your Entourage contacts into Outlook 2011?
Please let us know a bit more about your situation.
Jay -
How do I pull SharePoint 2013 list data using a SQL Query
I have been asked to write a sql query to pull data from a SharePoint 2013 List.it needs to return all the columns
Basically a Select all from the specific SharePoint list Database
I do have the list GUID ID. But not sure which SQL Table or Database to look in for list data.. the site and the list is in our main SharePoint site collection.
the query only needs to be saved in SQL serverI know it isn't support but sometimes you have to share data with other programs....
I'm stuck.. I was able to get this far...
SELECT * FROM dbo.Lists
where tp_Title ='List Name'
how do I pull the columns of the list?
I think I still need the specific list not just the master list dbo....
those two links do not work for SQL server and SharePoint 2013 -
Font (times) not showing up in Dreamweaver, not in preferences font list
I'm on a computer using 10.6.8, Snow Leopard and Dreamweaver CS5. When we apply a style of Times New Roman to the text, it remains in it's default state (sans serif). When we apply a font family style, including times and a default serif font, the font still appears sans serif. This makes it seem like dreamweaver thinks the font it has is times, or it would default down the font family chain. When we preview in the browser the correct times new roman font is used.
I thought it might be all adobe apps, but photoshop and illustrator display times just fine. We've validated the font in font book, cleared up duplicate problems with other fonts in font book. We've used onyx to clear the font cache several times. After clearing the catch dreamweaver goes into some kind of font routine and takes about 15 minutes to get out of it. When I sample this process from activity monitor I see it running tons of font related routines. One time after this routine the correct times new roman font appeared! But after a program restart it disappeared again. Please help! We've spent hours already on this yesterday and am not looking forward to losing another half day today!In addition to onyx I've also used the recommended "Font Finagler" application for clearing the font cache and working with fonts. It and font book both seem to validate and approve the times new roman font.
I logged in as another user and experienced the same problem.
In addition, I have a host of other fonts in the aphabetical ti-uvwxy range, and none of them show up in my font list in the system preferences font drop down. "Times", the first fallback font for the font family is within this missing range as well and does not show up. I know this list is for choosing the system fonts for the interface but I think it further points towards there being some kind of bug or problem with loading my entire font list into the application.
Again, these fonts work fine in the other adobe applications, just not in dreamweaver. I'll try and upload an image of the font list. You'll see it cuts off right at fonts that start with "th" even though I have loads of other fonts between t-z. -
Is it possible to clear the entire Bookmarks list at one time in Safari for Windows?
Hello. Is it possible to clear the entire Bookmarks list at one time in Safari for Windows? I would like to continue to use the Safari browser even though I have Windows 7 as the operating system on my notebook. When I try to delete bookmark entries one at a time, after deleting several, errors start popping up in the browser. Can I reinstall Safari without the Bookmarks I've built up? Please help a humbled Safari user.
Are you sure that you can change the permissions of symlinks themselves? I think I've tried to make files read-only via symlinks on a local server but ended up using bindfs because it wasn't possible. Even if you can, symlinking everything that might be necessary for a given environment would not be ideal, plus I don't think symlinks can be used across different filesystems.
If a real-life human can figure out if it's he/she is in a chroot and break out of it, then he/she can write a script to do the same. I want a sandbox that could run malicious code with no effect on the system (if that's possible). Also, I think if the chroot idea were truly feasible, makepkg would have been using it for years already to simply install packages in the chroot as you normally would and then package them. There would also be several sandbox applications that could run applications safely. So far I have yet to find any.
I admit that I haven't looked into using a chroot in detail though and of course I may have missed some application which creates such a setup. Right now I think using per-application namespaces with fuse seems the most promising but I won't know until I've finished implementing a test application. If it turns out that it's a dead end I'll take harder look at chroot but it really doesn't seem to be able to do what I want. -
HT1368 How do I see the monetary value of my entire wish list?
I am brand new to this, so please be kind. I am leaning heavily toward purchasing my entire wish list. At one point I could see clearly exactly how much all of my current wish list cost, but for some reason I am fumbling around trying to find it.
Also, I'd like to purchase all of my wish list songs in one fell swoop - not buy 25 songs for one transaction, then another 25 and so on.
Any advice is appreciated - thanks!Hello ed2345,
Thank you for your reply. Will I be taxed on each song that I buy? That would add up quickly!!
That's too bad that some of the functionality has been removed. I also noticed the other day that some songs that I added to my wish list were gone, I checked for the artist again and none of the studio recorded albums were available - only the live versions. Then today I decided to search for the artist again, all of the albums were back (both studio and live), so I re-added the songs to my wish list.
What's up with that?
I asked my husband about it, he said that Apple may have lost the rights to that particular batch of studio recorded albums. He also said that we are buying only leased music, so when we sync our iPods there is potential to lose music we have already paid for. Is this true?
Thanks again for your response! I appreicate your help and anyone else that decides to chime in. -
Where is the button to purchase my entire wish list now?
How do I purchase my entire wish list.....there used to be a button to click and you could download everything. Now it seems I have to click each one...Am I missing something?
Authorization and Deauthorization
Macs: iTunes Store- About authorization and deauthorization.
Windows: How to Authorize or Deauthorize iTunes | PCWorld.
In iTunes you use the Authorize This Computer or De-authorize This Computer option under the Store menu in iTunes' menubar. For Windows use the ALT-S keys to access it.
More On De-authorizing Computers (contributed by user John Galt)
You can de-authorize individual computers, but only by using those computers. The only other option is to "de-authorize all" from your iTunes account.
1. Open iTunes on a computer
2. From the Store menu, select "View my Account..."
3. Sign in with your Apple ID and password.
4. Under "Computer Authorizations" select "De-authorize All".
5. Authorize each computer you still have, as you may require.
You may only do this once per year.
After you "de-authorize all" your authorized computers, re-authorize each one as required.
If you have de-authorized all computers and need to do it again, but your year has not elapsed, then contact: Apple - Support - iTunes - Contact Us.
Maybe you are looking for
-
Anyone using BlueTooth with MSI KT3 Ultra-Aru?
Has anyone setup BlueTooth PC to PC network with the MSI KT3 Ultra-Aru? Where can one get the transmitter? (assuming it works)
-
GRC AC ARA v10 SP13 - Org Rule Org Level Missing
Hi Experts! Testing ARA Organization Rules soon and have noticed that one of my key Org Levels, $BUKRS, is missing. I have not yet used this functionality on this system. I am already doing the following: running the authorization sync job daily (we
-
Hi Experts, I have a question regarding CUP 5.3 SP11, I am wondering if you all have had the same scenarios before. We have about 20 systems connected to the CUP. When an employee leaves the company a person in HR usually sends a termination request
-
Running out of disk space on root partition
Hello, I'm running gnome 3 and every time I boot and logon with my user I'm getting a warning that my root partition is running out of disk space (~350MB free out of 7.5GB). This seems really strange to me since I've not installed very much software.
-
I'm trying to start over. Typed wrong id ( not my email). Now I have a new id but can't change my iCloud account. I need to just start over from scratch but it won't let me do so. When it sends verification it is sending it to a nonexistent email.