Sqlite3.dll missing

Every time I update Itunes on my pc, I get the sqlite3.dll missing problem and I have to fix it myself. Why can't Apple get this obviously simple issue fixed? From looking at the forums, this has been going on for a couple of years. And folks say MS is screwed up.

Try downloading Firefox again, then uninstall Firefox, remove the program directory, and install it all over again.

Similar Messages

Firefox 5.0.1 fails to start with sqlite3.dll missing message

ff 5.0.1 started losing all my bookmarks. I imported them and the next day they were gone again. I had other strange things happening so I decided to go back to ff 3. I uninstalled ff5.0.1 and removed the ProgramFiles directory. I installed ff3 and it worked ok. I used it to upgrade to I believe 3.0.19 ok. I then upgraded to 3.6. The upgrade appeared ok but it would not start. I got an sqlite3.dll missing message. Nothing I have done has gotten ff to start. I have uninstalled and reinstalled 5.0.1 and still be sqlite3.dll missing message. I searched my C drive for sqlite3.dll and found several stored with other applications. The FF directory had an mozsqlite3.dll but not just sqlite3.dll.
At this point I can't start FF.

Try downloading Firefox again, then uninstall Firefox, remove the program directory, and install it all over again.

After I installed the latest version of ITunes I get a message saying I'm missing the SQlite3.dll file. I have even unistalled the new version and then re-installed, still same message.

After I installed the latest version of ITunes I get a message saying I'm missing the SQlite3.dll file. I have even unistalled the new version and then re-installed, still same message.

With Windows Explorer, navigate to your C:\Program Files\Common Files\Apple\Apple Application Support folder.
Copy the SQLite3.dll that you should find there, navigate to the nearby Mobile Device Support folder, and Paste it in there also.
Restart the programme all should be well
In case that your OS is (64 bit)
1. Open windows explorer, go to location C:\Program Files (x86)\Common Files\Apple\Apple Application Support
2. Copy file "SQLite3.dll"
3. Now paste it in the folder C:\Program Files (x86)\Common Files\Apple\Mobile Device Support
4. Restart the programme, it should not display that message, it should be clear.
Good Luck

When I try to install iTunes on my Windows computer I get an error message, "Apple Mobile Device failed to start". After an incomplete installation when I try to open iTunes I get an error message, "MSVCR80.dll missing". I downloaded MSVCR80.dll.

When I open iTunes I get an error message "MSVCR80.DLL missing". I downloaded this .dll and installed in C:\Windows|System32. I then scanned my computer to fix registry errors.I uninstalled iTunes and reinstalled and got the following error message "Apple Mobile Device failed to start".

Try the following user tip:
Troubleshooting issues with iTunes for Windows updates

What does this message mean on my PC " the procedure entry point sqlite3_wal_checkpoint could not be located in dynamic link library SQlite3.dll.

Why does this message pop up on my PC after i start up " (AppleSyncNotifier.exe-Entry Point Not Found ) the procedure entry point sqlite3_wal_checkpoint could not be located in dynamic link library SQlite3.dll. ? What can I do to fix this problem ?

Found this several months ago when I updated ITunes. I don't know why they still haven't fixed this, but I had to do this again yesterday 10/13/2011 when I updated.
With Windows Explorer, navigate to your C:\Program Files\Common Files\Apple\Apple Application Support folder.
Copy the SQLite3.dll that you should find there, navigate to the nearby Mobile Device Support folder, and Paste it in there also.
Reboot and see if all is well
In case that your OS is Windows 7 (64 bit)
1. Open windows explorer, go to location C:\Program Files (x86)\Common Files\Apple\Apple Application Support
2. Copy file "SQLite3.dll"
3. Open new windows explorer, to to location C:\Program Files (x86)\Common Files\Apple\Mobile Device Support
4. Paste file "SQLite3.dll" to the location.
5. Reboot your computer, it should not display that message, it should be clear.

While trying to run it show error message : "The application or DLL C:\Program Files\Mozilla Firefox\sqlite3.dll is not a valid Windows image. Please check this against your installation diskette

Just updated firefox. While trying to run it show error message : "The application or DLL C:\Program Files\Mozilla Firefox\sqlite3.dll is not a valid Windows image. Please check this against your installation diskette." Tried to download and install new firefox, but it alway show that the file is corrupt
== Today ==
== User Agent ==
Mozilla/4.0 (compatible; MSIE 7.0; Windows NT 5.1; .NET CLR 1.1.4322; .NET CLR 2.0.50727; .NET CLR 3.0.4506.2152; .NET CLR 3.5.30729; InfoPath.2)

Do a clean reinstall and download a fresh Firefox copy from http://www.mozilla.com/firefox/all.html and save the file to the desktop.
Uninstall your current Firefox version and remove the Firefox program folder before installing that copy of the Firefox installer.
It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
You can skip the step to create a new profile, that is not necessary for this issue.
See http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall

Help! I keep getting the following message: the procedure entry point sqlite3_wal_checkpoint could not be located in the dynamic link library SQLite3.dll.

Hi,
Since downloading the updated version of itunes around May this year I have had the following problems:
1. This error message appears when my windows account launches:
the procdure entry point sqlite3_wal_checkpoint could not be located in the dynamic link library SQLite3.dll.
2. I can't play any of the files in my itunes library. An error message appears indicating it can't find the files.
3. When I plugged my iphone in to update it was corrupted and I have lost all 7000 + songs.
You can guess that I am not a very happy bunny with itunes at the moment!
Please, can anyone suggest how to sort this lot out. I am aware that I've probably lost the ipod songs, but I need to get rid of the error message and be able to play the songs on from my library. I've been without since May now and I'm wondering whether to even bother getting it sorted, but I have quite a few albums purchased on itunes that I don't want to lose!
Thank you for your time.
Michelle

Thank you. I'm going to investigate saving my itunes library to the icloud and then re-trying the Stellar Phoenix recovery now the error messages have gone. If the Stellar doesn't work then I will try the advice in your link. I really appreicate the help you've given me - at least I have my itunes library back! I'm kind of resigned to re-loading my CDs back on - something to keep my busy in the winter months!
I'll let you know how I get on, but it will probably be a few days.I'm not very technical so I have to wait for my husband to get in from work to help me with this side of things. He's been busy working on the Olympics, so I he hasn't had much spare time for a while!
Michelle

I am getting the following error message on reboot: The procedure entrypoint sqlite 3_wal_ checkpoint could not be located in the dynamic link library sqlite3.dll.

What do I need to do to eliminate the following error message:
The procedure entrypoint sqlite3_wal_checkpoint could not be located in the dynamic link library sqlite3.dll.
I am currently running Firefox 6.0 on my laptop. Thanks.

So for the people with similar problem as mine, please do the following. It cleared that error message right away so this must be the solution.
1. Go to c:\program files (X86)\Common Files\Apple\Application Support
2. Find SQlite3.dll in that folder, then right click it and choose Copy
3. Go to c:\program files(X86)\Common Files\Apple\Mobile Device Support
4. Paste SQlite3.dll in this folder
5. Restart your Windows
ps. use Program Files instead of Program Files(X86) folder if your computer does Not use 64bits. Mine does.

When starting Windows 7 Sync Notifier reports "The procedure entry point sqlite3_wal_checkpoint could not be located in the dynamic link library SQLite3.dll." Any suggestions as to how to rectify this issue?

When starting Windows 7 Sync Notifier reports "The procedure entry point sqlite3_wal_checkpoint could not be located in the dynamic link library SQLite3.dll." Any suggestions as to how to rectify this issue?

With Windows Explorer, navigate to your C:\Program Files\Common Files\Apple\Apple Application Support folder.
Copy the SQLite3.dll that you should find there, navigate to the nearby Mobile Device Support folder, and Paste it in there also.
Restart the programme all should be well
In case that your OS is (64 bit)
1. Open windows explorer, go to location C:\Program Files (x86)\Common Files\Apple\Apple Application Support
2. Copy file "SQLite3.dll"
3. Now paste it in the folder C:\Program Files (x86)\Common Files\Apple\Mobile Device Support
4. Restart the programme, it should not display that message, it should be clear.
Good Luck

When I open my computer I receive the following message: The procedure entry point sqlite3_wal_checkpoint couldnot be located in the dynamic link library SQLite3.dll How can this be corrected? I never got this message before and I have a iPhone and iPad

When opening Windows 7 I'm receiving the following message The procedure entry point sqlite3_wal_checkpoint could not be located in the dynamic link library SQLite3.dll.......I have never rec'd this before............I have a iPhone and iPad...............How can this be corrected without interferring with the information on my computer? Thanks

With Windows Explorer, navigate to your C:\Program Files\Common Files\Apple\Apple Application Support folder.
Copy the SQLite3.dll that you should find there, navigate to the nearby Mobile Device Support folder, and Paste it in there also.
Reboot and see if all is well
In case that your OS is Windows 7 (64 bit)
1. Open windows explorer, go to location C:\Program Files (x86)\Common Files\Apple\Apple Application Support
2. Copy file "SQLite3.dll"
3. Open new windows explorer, to to location C:\Program Files (x86)\Common Files\Apple\Mobile Device Support
4. Paste file "SQLite3.dll" to the location.
5. Reboot your computer, it should not display that message, it should be clear.
Good Luck

HT203175 I have just downloaded itunes onto my laptop operating sytem windows XP. When I start up my laptop an error message appears, "The proceedure entry point sqlite3_wal_checkpoint could not be located in the dynamic link lirary SQLite3.dll

Downloading new version of itunes onto my laptop and now when I start up there is an error message "the proceedure entry point sqlite3_wal_checkpoint could not be located in the dynamic link library SQLite3.dll" Can anyone advise on how to correct this safely.

Try uninstalling your MobileMe control panel. Does that clear up the error?

My problem is on my Windows PC. I am getting the error message, "The procedure entry point sqlite_3_wal_checkpoint could not be located in the dynamic link library SQLite3.dll. I am told this is related to iTunes. Any help?

I use both a Mac and a PC. My problem is on my Windows 7 PC. I am getting the error message, "The procedure entry point sqlite_3_wal_checkpoint could not be located in the dynamic link library SQLite3.dll. I am told this is related to iTunes. Any help out there? Thanks

With Windows Explorer, navigate to your C:\Program Files\Common Files\Apple\Apple Application Support folder.
Copy the SQLite3.dll that you should find there, navigate to the nearby Mobile Device Support folder, and Paste it in there also.
Restart the programme all should be well
In case that your OS is (64 bit)
1. Open windows explorer, go to location C:\Program Files (x86)\Common Files\Apple\Apple Application Support
2. Copy file "SQLite3.dll"
3. Now paste it in the folder C:\Program Files (x86)\Common Files\Apple\Mobile Device Support
4. Restart the programme, it should not display that message, it should be clear.
Good Luck

On my HP laptop I get the following when booting up every time: "Apple Syn Notifier-Entry Ponint Not Found. The procedure entry point sqlite3_wal_checkpoint could not be located in the dynamic link library SQLite3.dll

On my HP laptop I get the following when booting up every time: "Apple Syn Notifier-Entry Ponint Not Found. The procedure entry point sqlite3_wal_checkpoint could not be located in the dynamic link library SQLite3.dll
I have to clear this everytime I boot up?

With that one, perhaps first try uninstalling and reinstalling your MobileMe control panel. Does that clear up the error?

I have a error message when i turn on my computer. AppleSyncNotifier.exe - Entry Point Not Found. The procedure entry point sqlite3_wal_checkpoint could not be located in the dynamic link library SQLite3.dll. Any thoughts?

I have a error message when i turn on my computer. AppleSyncNotifier.exe - Entry Point Not Found. The procedure entry point sqlite3_wal_checkpoint could not be located in the dynamic link library SQLite3.dll.
Any thoughts?

Found this fix here which worked for me with a similar problem.
https://discussions.apple.com/thread/3196594?start=0&tstart=0
With Windows Explorer, navigate to your C:\Program Files\Common Files\Apple\Apple Application Support folder.
Copy the SQLite3.dll that you should find there, navigate to the nearby Mobile Device Support folder, and Paste it in there also.
Reboot and see if all is well.

How do i fix the following message that appears when i open my computer :- Apple Sync Notifier.exe Entry Point not found the procedure entry point sqlite3_wal_check point chould not be located in the dynamic link library SQLite3.dll

Apple Sync Notifies,exe.Entry point not found the procedure entry point sqlite3_wal_checkpoint could not be located in the dynamic link library SQLite3.dll
I have uninstalled Itunes 10.4 shut down and installed Itunes 10.4 and still get this message on opening? How do i fix this problem?

With Windows Explorer, navigate to your C:\Program Files\Common Files\Apple\Apple Application Support folder.
Copy the SQLite3.dll that you should find there, navigate to the nearby Mobile Device Support folder, and Paste it in there also.
Restart the programme all should be well
In case that your OS is (64 bit)
1. Open windows explorer, go to location C:\Program Files (x86)\Common Files\Apple\Apple Application Support
2. Copy file "SQLite3.dll"
3. Now paste it in the folder C:\Program Files (x86)\Common Files\Apple\Mobile Device Support
4. Restart the programme, it should not display that message, it should be clear.
Good Luck

Sqlite3.dll missing

Similar Messages

Maybe you are looking for