Sqlj files are not processed by javadoc

Hi,
I have a projects containing java files stored in database. Some of them contain SQLJ code and exist in the projects as *.sqlj files. When I create build javadoc documentation these *.sqlj files are ignored and the resulting documentation is missing some of the classes. Did anyone encountered the same problem?
Best wishes,
Tomek

Javadoc will not work on SQLJ files. An excerpt from a thread on the javadoc forum at Sun (for some reason, I cannot access the post, but Google has a cache of it):
>
The javadoc tool is limited to java source files. It's pretty much a precondition of the javadoc tool that a source file must be able to be compiled by the javac compiler. Javadoc uses parts of javac to
parse the source file and build a doc structure, using javac internal data structures. If your sqlj file cannot be compiled by javac, they are unlikely to be parsed by the javadoc tool. John

Similar Messages

  • In SMQ2 files are not processing automatically

    Hi
    I'm uploading the data using XI to ECC system. I'm facing a problem with a Q in ECC.
    Each and every file when I upload it is getting stuck in ECC. So, I will have to go to SMQ2 in ECC and unlocking it and activating it and refreshing.
    I also confirm that files will have only limited records like say 5 records with very minimum fields.
    This should be done automatically why is this happening? Is there any Note to apply for the same.
    Thanks.
    C.

    Generated Q and finished the issue.

  • I have one problem with Data Guard. My archive log files are not applied.

    I have one problem with Data Guard. My archive log files are not applied. However I have received all archive log files to my physical Standby db
    I have created a Physical Standby database on Oracle 10gR2 (Windows XP professional). Primary database is on another computer.
    In Enterprise Manager on Primary database it looks ok. I get the following message “Data Guard status Normal”
    But as I wrote above ”the archive log files are not applied”
    After I created the Physical Standby database, I have also done:
    1. I connected to the Physical Standby database instance.
    CONNECT SYS/SYS@luda AS SYSDBA
    2. I started the Oracle instance at the Physical Standby database without mounting the database.
    STARTUP NOMOUNT PFILE=C:\oracle\product\10.2.0\db_1\database\initluda.ora
    3. I mounted the Physical Standby database:
    ALTER DATABASE MOUNT STANDBY DATABASE
    4. I started redo apply on Physical Standby database
    alter database recover managed standby database disconnect from session
    5. I switched the log files on Physical Standby database
    alter system switch logfile
    6. I verified the redo data was received and archived on Physical Standby database
    select sequence#, first_time, next_time from v$archived_log order by sequence#
    SEQUENCE# FIRST_TIME NEXT_TIME
    3 2006-06-27 2006-06-27
    4 2006-06-27 2006-06-27
    5 2006-06-27 2006-06-27
    6 2006-06-27 2006-06-27
    7 2006-06-27 2006-06-27
    8 2006-06-27 2006-06-27
    7. I verified the archived redo log files were applied on Physical Standby database
    select sequence#,applied from v$archived_log;
    SEQUENCE# APP
    4 NO
    3 NO
    5 NO
    6 NO
    7 NO
    8 NO
    8. on Physical Standby database
    select * from v$archive_gap;
    No rows
    9. on Physical Standby database
    SELECT MESSAGE FROM V$DATAGUARD_STATUS;
    MESSAGE
    ARC0: Archival started
    ARC1: Archival started
    ARC2: Archival started
    ARC3: Archival started
    ARC4: Archival started
    ARC5: Archival started
    ARC6: Archival started
    ARC7: Archival started
    ARC8: Archival started
    ARC9: Archival started
    ARCa: Archival started
    ARCb: Archival started
    ARCc: Archival started
    ARCd: Archival started
    ARCe: Archival started
    ARCf: Archival started
    ARCg: Archival started
    ARCh: Archival started
    ARCi: Archival started
    ARCj: Archival started
    ARCk: Archival started
    ARCl: Archival started
    ARCm: Archival started
    ARCn: Archival started
    ARCo: Archival started
    ARCp: Archival started
    ARCq: Archival started
    ARCr: Archival started
    ARCs: Archival started
    ARCt: Archival started
    ARC0: Becoming the 'no FAL' ARCH
    ARC0: Becoming the 'no SRL' ARCH
    ARC1: Becoming the heartbeat ARCH
    Attempt to start background Managed Standby Recovery process
    MRP0: Background Managed Standby Recovery process started
    Managed Standby Recovery not using Real Time Apply
    MRP0: Background Media Recovery terminated with error 1110
    MRP0: Background Media Recovery process shutdown
    Redo Shipping Client Connected as PUBLIC
    -- Connected User is Valid
    RFS[1]: Assigned to RFS process 2148
    RFS[1]: Identified database type as 'physical standby'
    Redo Shipping Client Connected as PUBLIC
    -- Connected User is Valid
    RFS[2]: Assigned to RFS process 2384
    RFS[2]: Identified database type as 'physical standby'
    Redo Shipping Client Connected as PUBLIC
    -- Connected User is Valid
    RFS[3]: Assigned to RFS process 3188
    RFS[3]: Identified database type as 'physical standby'
    Primary database is in MAXIMUM PERFORMANCE mode
    Primary database is in MAXIMUM PERFORMANCE mode
    RFS[3]: No standby redo logfiles created
    Redo Shipping Client Connected as PUBLIC
    -- Connected User is Valid
    RFS[4]: Assigned to RFS process 3168
    RFS[4]: Identified database type as 'physical standby'
    RFS[4]: No standby redo logfiles created
    Primary database is in MAXIMUM PERFORMANCE mode
    RFS[3]: No standby redo logfiles created
    10. on Physical Standby database
    SELECT PROCESS, STATUS, THREAD#, SEQUENCE#, BLOCK#, BLOCKS FROM V$MANAGED_STANDBY;
    PROCESS STATUS THREAD# SEQUENCE# BLOCK# BLOCKS
    ARCH CONNECTED 0 0 0 0
    ARCH CONNECTED 0 0 0 0
    ARCH CONNECTED 0 0 0 0
    ARCH CONNECTED 0 0 0 0
    ARCH CONNECTED 0 0 0 0
    ARCH CONNECTED 0 0 0 0
    ARCH CONNECTED 0 0 0 0
    ARCH CONNECTED 0 0 0 0
    ARCH CONNECTED 0 0 0 0
    ARCH CONNECTED 0 0 0 0
    ARCH CONNECTED 0 0 0 0
    ARCH CONNECTED 0 0 0 0
    ARCH CONNECTED 0 0 0 0
    ARCH CONNECTED 0 0 0 0
    ARCH CONNECTED 0 0 0 0
    ARCH CONNECTED 0 0 0 0
    ARCH CONNECTED 0 0 0 0
    ARCH CONNECTED 0 0 0 0
    ARCH CONNECTED 0 0 0 0
    ARCH CONNECTED 0 0 0 0
    ARCH CONNECTED 0 0 0 0
    ARCH CONNECTED 0 0 0 0
    ARCH CONNECTED 0 0 0 0
    ARCH CONNECTED 0 0 0 0
    ARCH CONNECTED 0 0 0 0
    ARCH CONNECTED 0 0 0 0
    ARCH CONNECTED 0 0 0 0
    ARCH CONNECTED 0 0 0 0
    ARCH CONNECTED 0 0 0 0
    ARCH CONNECTED 0 0 0 0
    RFS IDLE 0 0 0 0
    RFS IDLE 0 0 0 0
    RFS IDLE 1 9 13664 2
    RFS IDLE 0 0 0 0
    10) on Primary database:
    select message from v$dataguard_status;
    MESSAGE
    ARC0: Archival started
    ARC1: Archival started
    ARC2: Archival started
    ARC3: Archival started
    ARC4: Archival started
    ARC5: Archival started
    ARC6: Archival started
    ARC7: Archival started
    ARC8: Archival started
    ARC9: Archival started
    ARCa: Archival started
    ARCb: Archival started
    ARCc: Archival started
    ARCd: Archival started
    ARCe: Archival started
    ARCf: Archival started
    ARCg: Archival started
    ARCh: Archival started
    ARCi: Archival started
    ARCj: Archival started
    ARCk: Archival started
    ARCl: Archival started
    ARCm: Archival started
    ARCn: Archival started
    ARCo: Archival started
    ARCp: Archival started
    ARCq: Archival started
    ARCr: Archival started
    ARCs: Archival started
    ARCt: Archival started
    ARCm: Becoming the 'no FAL' ARCH
    ARCm: Becoming the 'no SRL' ARCH
    ARCd: Becoming the heartbeat ARCH
    Error 1034 received logging on to the standby
    Error 1034 received logging on to the standby
    LGWR: Error 1034 creating archivelog file 'luda'
    LNS: Failed to archive log 3 thread 1 sequence 7 (1034)
    FAL[server, ARCh]: Error 1034 creating remote archivelog file 'luda'
    11)on primary db
    select name,sequence#,applied from v$archived_log;
    NAME SEQUENCE# APP
    C:\ORACLE\PRODUCT\10.2.0\ORADATA\IRINA\ARC00003_0594204176.001 3 NO
    C:\ORACLE\PRODUCT\10.2.0\ORADATA\IRINA\ARC00004_0594204176.001 4 NO
    Luda 4 NO
    Luda 3 NO
    C:\ORACLE\PRODUCT\10.2.0\ORADATA\IRINA\ARC00005_0594204176.001 5 NO
    Luda 5 NO
    C:\ORACLE\PRODUCT\10.2.0\ORADATA\IRINA\ARC00006_0594204176.001 6 NO
    Luda 6 NO
    C:\ORACLE\PRODUCT\10.2.0\ORADATA\IRINA\ARC00007_0594204176.001 7 NO
    Luda 7 NO
    C:\ORACLE\PRODUCT\10.2.0\ORADATA\IRINA\ARC00008_0594204176.001 8 NO
    Luda 8 NO
    12) on standby db
    select name,sequence#,applied from v$archived_log;
    NAME SEQUENCE# APP
    C:\ORACLE\PRODUCT\10.2.0\ORADATA\LUDA\ARC00004_0594204176.001 4 NO
    C:\ORACLE\PRODUCT\10.2.0\ORADATA\LUDA\ARC00003_0594204176.001 3 NO
    C:\ORACLE\PRODUCT\10.2.0\ORADATA\LUDA\ARC00005_0594204176.001 5 NO
    C:\ORACLE\PRODUCT\10.2.0\ORADATA\LUDA\ARC00006_0594204176.001 6 NO
    C:\ORACLE\PRODUCT\10.2.0\ORADATA\LUDA\ARC00007_0594204176.001 7 NO
    C:\ORACLE\PRODUCT\10.2.0\ORADATA\LUDA\ARC00008_0594204176.001 8 NO
    13) my init.ora files
    On standby db
    irina.__db_cache_size=79691776
    irina.__java_pool_size=4194304
    irina.__large_pool_size=4194304
    irina.__shared_pool_size=75497472
    irina.__streams_pool_size=0
    *.audit_file_dest='C:\oracle\product\10.2.0\admin\luda\adump'
    *.background_dump_dest='C:\oracle\product\10.2.0\admin\luda\bdump'
    *.compatible='10.2.0.1.0'
    *.control_files='C:\oracle\product\10.2.0\oradata\luda\luda.ctl'
    *.core_dump_dest='C:\oracle\product\10.2.0\admin\luda\cdump'
    *.db_block_size=8192
    *.db_domain=''
    *.db_file_multiblock_read_count=16
    *.db_file_name_convert='luda','irina'
    *.db_name='irina'
    *.db_unique_name='luda'
    *.db_recovery_file_dest='C:\oracle\product\10.2.0\flash_recovery_area'
    *.db_recovery_file_dest_size=2147483648
    *.dispatchers='(PROTOCOL=TCP) (SERVICE=irinaXDB)'
    *.fal_client='luda'
    *.fal_server='irina'
    *.job_queue_processes=10
    *.log_archive_config='DG_CONFIG=(irina,luda)'
    *.log_archive_dest_1='LOCATION=C:/oracle/product/10.2.0/oradata/luda/ VALID_FOR=(ALL_LOGFILES, ALL_ROLES) DB_UNIQUE_NAME=luda'
    *.log_archive_dest_2='SERVICE=irina LGWR ASYNC VALID_FOR=(ONLINE_LOGFILES, PRIMARY_ROLE) DB_UNIQUE_NAME=irina'
    *.log_archive_dest_state_1='ENABLE'
    *.log_archive_dest_state_2='ENABLE'
    *.log_archive_max_processes=30
    *.log_file_name_convert='C:/oracle/product/10.2.0/oradata/irina/','C:/oracle/product/10.2.0/oradata/luda/'
    *.open_cursors=300
    *.pga_aggregate_target=16777216
    *.processes=150
    *.remote_login_passwordfile='EXCLUSIVE'
    *.sga_target=167772160
    *.standby_file_management='AUTO'
    *.undo_management='AUTO'
    *.undo_tablespace='UNDOTBS1'
    *.user_dump_dest='C:\oracle\product\10.2.0\admin\luda\udump'
    On primary db
    irina.__db_cache_size=79691776
    irina.__java_pool_size=4194304
    irina.__large_pool_size=4194304
    irina.__shared_pool_size=75497472
    irina.__streams_pool_size=0
    *.audit_file_dest='C:\oracle\product\10.2.0/admin/irina/adump'
    *.background_dump_dest='C:\oracle\product\10.2.0/admin/irina/bdump'
    *.compatible='10.2.0.1.0'
    *.control_files='C:\oracle\product\10.2.0\oradata\irina\control01.ctl','C:\oracle\product\10.2.0\oradata\irina\control02.ctl','C:\oracle\product\10.2.0\oradata\irina\control03.ctl'
    *.core_dump_dest='C:\oracle\product\10.2.0/admin/irina/cdump'
    *.db_block_size=8192
    *.db_domain=''
    *.db_file_multiblock_read_count=16
    *.db_file_name_convert='luda','irina'
    *.db_name='irina'
    *.db_recovery_file_dest='C:\oracle\product\10.2.0/flash_recovery_area'
    *.db_recovery_file_dest_size=2147483648
    *.dispatchers='(PROTOCOL=TCP) (SERVICE=irinaXDB)'
    *.fal_client='irina'
    *.fal_server='luda'
    *.job_queue_processes=10
    *.log_archive_config='DG_CONFIG=(irina,luda)'
    *.log_archive_dest_1='LOCATION=C:/oracle/product/10.2.0/oradata/irina/ VALID_FOR=(ALL_LOGFILES, ALL_ROLES) DB_UNIQUE_NAME=irina'
    *.log_archive_dest_2='SERVICE=luda LGWR ASYNC VALID_FOR=(ONLINE_LOGFILES, PRIMARY_ROLE) DB_UNIQUE_NAME=luda'
    *.log_archive_dest_state_1='ENABLE'
    *.log_archive_dest_state_2='ENABLE'
    *.log_archive_max_processes=30
    *.log_file_name_convert='C:/oracle/product/10.2.0/oradata/luda/','C:/oracle/product/10.2.0/oradata/irina/'
    *.open_cursors=300
    *.pga_aggregate_target=16777216
    *.processes=150
    *.remote_login_passwordfile='EXCLUSIVE'
    *.sga_target=167772160
    *.standby_file_management='AUTO'
    *.undo_management='AUTO'
    *.undo_tablespace='UNDOTBS1'
    *.user_dump_dest='C:\oracle\product\10.2.0/admin/irina/udump'
    Please help me!!!!

    Hi,
    After several tries my redo logs are applied now. I think in my case it had to do with the tnsnames.ora. At this moment I have both database in both tnsnames.ora files using the SID and not the SERVICE_NAME.
    Now I want to use DGMGRL. Adding a configuration and a stand-by database is working fine, but when I try to enable the configuration DGMGRL gives no feedback and it looks like it is hanging. The log, although says that it succeeded.
    In another session 'show configuration' results in the following, confirming that the enable succeeded.
    DGMGRL> show configuration
    Configuration
    Name: avhtest
    Enabled: YES
    Protection Mode: MaxPerformance
    Fast-Start Failover: DISABLED
    Databases:
    avhtest - Primary database
    avhtestls53 - Physical standby database
    Current status for "avhtest":
    Warning: ORA-16610: command 'ENABLE CONFIGURATION' in progress
    It there anybody that experienced the same problem and/or knows the solution to this?
    With kind regards,
    Martin Schaap

  • Java.lang.SecurityException: Jurisdiction policy files are not signed by t

    Hi
    *I am installing ECC6 onAIX 6.1 with oarcle 10g.*
    *I am getting error in create secure store*
    *Policy and security files are ok,*
    aused by: java.lang.ExceptionInInitializerError
            at java.lang.J9VMInternals.initialize(J9VMInternals.java:218)
            at javax.crypto.Cipher.a(Unknown Source)
            at javax.crypto.Cipher.getInstance(Unknown Source)
            at iaik.security.provider.IAIK.a(Unknown Source)
            at iaik.security.provider.IAIK.addAsJDK14Provider(Unknown Source)
            at iaik.security.provider.IAIK.addAsJDK14Provider(Unknown Source)
            at com.sap.security.core.server.secstorefs.Crypt.<clinit>(Crypt.java:82)
            at java.lang.J9VMInternals.initializeImpl(Native Method)
            at java.lang.J9VMInternals.initialize(J9VMInternals.java:196)
            at com.sap.security.core.server.secstorefs.SecStoreFS.setSID(SecStoreFS.java:158)
            at com.sap.security.core.server.secstorefs.SecStoreFS.handleCreate(SecStoreFS.java:804)
            at com.sap.security.core.server.secstorefs.SecStoreFS.main(SecStoreFS.java:1274)
            ... 6 more
    Caused by: java.lang.SecurityException: Cannot set up certs for trusted CAs
            at javax.crypto.b.<clinit>(Unknown Source)
            at java.lang.J9VMInternals.initializeImpl(Native Method)
            at java.lang.J9VMInternals.initialize(J9VMInternals.java:196)
            ... 17 more
    Caused by: java.lang.SecurityException: Jurisdiction policy files are not signed by trusted signers!
            at javax.crypto.b.a(Unknown Source)
            at javax.crypto.b.a(Unknown Source)
            at javax.crypto.b.access$600(Unknown Source)
            at javax.crypto.b$0.run(Unknown Source)
            at java.security.AccessController.doPrivileged(AccessController.java:246)
            ... 20 more
    ERROR      2009-07-07 14:10:47.063
               CJSlibModule::writeError_impl()
    CJS-30050  Cannot create the secure store. SOLUTION: See output of log file SecureStoreCreate.log:
    SAP Secure Store in the File System - Copyright (c) 2003 SAP AG
    java.lang.reflect.InvocationTargetException
            at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
            at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:88)
            at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:61)
            at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:60)
            at java.lang.reflect.Method.invoke(Method.java:391)
            at com.sap.engine.offline.OfflineToolStart.main(OfflineToolStart.java:81)
    Caused by: java.lang.ExceptionInInitializerError
            at java.lang.J9VMInternals.initialize(J9VMInternals.java:218)
            at javax.crypto.Cipher.a(Unknown Source)
            at javax.crypto.Cipher.getInstance(Unknown Source)
            at iaik.security.provider.IAIK.a(Unknown Source)
            at iaik.security.provider.IAIK.addAsJDK14Provider(Unknown Source)
            at iaik.security.provider.IAIK.addAsJDK14Provider(Unknown Source)
            at com.sap.security.core.server.secstorefs.Crypt.<clinit>(Crypt.java:82)
            at java.lang.J9VMInternals.initializeImpl(Native Method)
            at java.lang.J9VMInternals.initialize(J9VMInternals.java:196)
            at com.sap.security.core.server.secstorefs.SecStoreFS.setSID(SecStoreFS.java:158)
            at com.sap.security.core.server.secstorefs.SecStoreFS.handleCreate(SecStoreFS.java:804)
            at com.sap.security.core.server.secstorefs.SecStoreFS.main(SecStoreFS.java:1274)
            ... 6 more
    Caused by: java.lang.SecurityException: Cannot set up certs for trusted CAs
            at javax.crypto.b.<clinit>(Unknown Source)
            at java.lang.J9VMInternals.initializeImpl(Native Method)
            at java.lang.J9VMInternals.initialize(J9VMInternals.java:196)
            ... 17 more
    Caused by: java.lang.SecurityException: Jurisdiction policy files are not signed by trusted signers!
            at javax.crypto.b.a(Unknown Source)
            at javax.crypto.b.a(Unknown Source)
            at javax.crypto.b.access$600(Unknown Source)
            at javax.crypto.b$0.run(Unknown Source)
            at java.security.AccessController.doPrivileged(AccessController.java:246)
            ... 20 more.
    ERROR      2009-07-07 14:10:47.547 [sixxcstepexecute.cpp:960]
    FCO-00011  The step createSecureStore with step key |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|2|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_SecureStore|ind|ind|ind|ind|8|0|createSecureStore was executed with status ERROR ( Last error reported by the step :Cannot create the secure store. SOLUTION: See output of log file SecureStoreCreate.log:
    SAP Secure Store in the File System - Copyright (c) 2003 SAP AG
    java.lang.reflect.InvocationTargetException
            at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
            at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:88)
            at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:61)
            at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:60)
            at java.lang.reflect.Method.invoke(Method.java:391)
            at com.sap.engine.offline.OfflineToolStart.main(OfflineToolStart.java:81)
    Caused by: java.lang.ExceptionInInitializerError
            at java.lang.J9VMInternals.initialize(J9VMInternals.java:218)
            at javax.crypto.Cipher.a(Unknown Source)
            at javax.crypto.Cipher.getInstance(Unknown Source)
            at iaik.security.provider.IAIK.a(Unknown Source)
            at iaik.security.provider.IAIK.addAsJDK14Provider(Unknown Source)
            at iaik.security.provider.IAIK.addAsJDK14Provider(Unknown Source)
            at com.sap.security.core.server.secstorefs.Crypt.<clinit>(Crypt.java:82)
            at java.lang.J9VMInternals.initializeImpl(Native Method)
            at java.lang.J9VMInternals.initialize(J9VMInternals.java:196)
            at com.sap.security.core.server.secstorefs.SecStoreFS.setSID(SecStoreFS.java:158)
            at com.sap.security.core.server.secstorefs.SecStoreFS.handleCreate(SecStoreFS.java:804)
            at com.sap.security.core.server.secstorefs.SecStoreFS.main(SecStoreFS.java:1274)
            ... 6 more
    Caused by: java.lang.SecurityException: Cannot set up certs for trusted CAs
            at javax.crypto.b.<clinit>(Unknown Source)
            at java.lang.J9VMInternals.initializeImpl(Native Method)
            at java.lang.J9VMInternals.initialize(J9VMInternals.java:196)
            ... 17 more
    Caused by: java.lang.SecurityException: Jurisdiction policy files are not signed by trusted signers!
            at javax.crypto.b.a(Unknown Source)
            at javax.crypto.b.a(Unknown Source)
            at javax.crypto.b.access$600(Unknown Source)
            at javax.crypto.b$0.run(Unknown Source)
            at java.security.AccessController.doPrivileged(AccessController.java:246)
            ... 20 more.).
    what could be the problem ?
    Please give me the soluation
    regards
    Vijay

    Dear Juan
    You are correct.
    I downloaded correct file from IBM site , and Create Secure store step completed but innext step IMPORT JAVA DUMP
    it gave error
    n error occurred while processing service SAP ERP 6.0 Support Release 3 > SAP Systems > Oracle > Central System > Central System( Last error reported by the step : Execution of JLoad tool '/usr/java14_64/bin/java -classpath /swdump/tmpinst/sapinst_instdir/ERP/SYSTEM/ORA/CENTRAL/AS/install/sharedlib/launcher.jar -showversion -Xmx512m -Xj9 com.sap.engine.offline.OfflineToolStart com.sap.inst.jload.Jload /swdump/tmpinst/sapinst_instdir/ERP/SYSTEM/ORA/CENTRAL/AS/install/lib/iaik_jce.jar:/swdump/tmpinst/sapinst_instdir/ERP/SYSTEM/ORA/CENTRAL/AS/install/sharedlib/jload.jar:/swdump/tmpinst/sapinst_instdir/ERP/SYSTEM/ORA/CENTRAL/AS/install/sharedlib/antlr.jar:/swdump/tmpinst/sapinst_instdir/ERP/SYSTEM/ORA/CENTRAL/AS/install/sharedlib/exception.jar:/swdump/tmpinst/sapinst_instdir/ERP/SYSTEM/ORA/CENTRAL/AS/install/sharedlib/jddi.jar:/swdump/tmpinst/sapinst_instdir/ERP/SYSTEM/ORA/CENTRAL/AS/install/sharedlib/logging.jar:/swdump/tmpinst/sapinst_instdir/ERP/SYSTEM/ORA/CENTRAL/AS/install/sharedlib/offlineconfiguration.jar:/swdump/tmpinst/sapinst_instdir/ERP/SYSTEM/ORA/CENTRAL/AS/install/sharedlib/opensqlsta.jar:/swdump/tmpinst/sapinst_instdir/ERP/SYSTEM/ORA/CENTRAL/AS/install/sharedlib/tc_sec_secstorefs.jar:/oracle/client/10x_64/instantclient/ojdbc14.jar -sec AGQ,jdbc/pool/AGQ,/usr/sap/AGQ/SYS/global/security/data/SecStore.properties,/usr/sap/AGQ/SYS/global/security/data/SecStore.key -dataDir /swdump/NW7.0_SR3_JAVA_COMP_51033513/DATA_UNITS/JAVA_EXPORT_JDMP -job /swdump/tmpinst/sapinst_instdir/ERP/SYSTEM/ORA/CENTRAL/AS/IMPORT.XML -log jload.log' aborts with return code 1. SOLUTION: Check 'jload.log' and '/swdump/tmpinst/sapinst_instdir/ERP/SYSTEM/ORA/CENTRAL/AS/jload.java.log' for more information.
    regards
    vijjay

  • Files are not getting posted in destination directory,how to trace in XI

    Hi,
    our scenario is proxy to file.
    We are posting files of .TRG and .DAT format in destination directory.Due to less space in destination directory, files only .TRG files are getting posted but .DAT are not getting posted.but i have checked in XI system SXMB_MONI,no error message is coming.message is getting processed successfully.
    why it is not visible and to monitor that files are not saved at the destination.
    Is this normal with XI that we can not see of files are really saved?

    Hi,
    > it should generate two files as per scenario but only one file is getting generated due to less space,
    NO.
    If  No  Space, The error will pops  out  in RWB  .
    Check the directory of the File Adapter  you are using
    Regards
    Agasthuri Doss

  • JCBC Adapter and File adapter not processing messages

    Hi
    I noticed that messages are being delivered to Adapter engine and the same are visible in Runtime Workbench with status "to be delivered". But, JDBC Adapter and File Adapter not processing these messages.
    Any idea where I can find the problem?
    I was able to re-deliver successfully via the JDBC Adapter using the MessagingSystem GUI using XISUPER user.
    Regards
    Chandu

    Hi,
    1.Status: TO_BE_DELIVERED
    Which means that the message was successfully delivered from Integration Server point of view and it states that the messages is initially handed over to the Messaging System.
    TO_BE_DELIVERED occurs while the message is put into the Messaging System receive queue.
    Regards
    Agasthuri Doss

  • LabView 2010 Applicatio​n Builder for EXE Always Included files are not Included

    In LabVIEW 2010 F2, When I am using the Application Builder to build an EXE file, I have listed 10 or so files to Be "Always Included". But when I Explore the directory where the EXE was built, those "Always Included" files are not there or in any subdirectory under the EXE file.
    This frequently makes my EXE file not work properly because important files are missing. I have to spend extra debugging time to find out the the cause of my problem is missing files that the Application Builder should have transferred "Always".
    Why did the Application Builder, when building an EXE target, not include the files that should be "Always Included"?
    Why does the Application Builder ignore these files specifications?

    Dennis Knutson wrote:
    The build does include files you select. Post an example project with a small VI and some separate files where this does not happen.
    No, it does not appear that all of the files that I listed in the "Always Include" list are copied during the Build process to the Build directory or any subdirectory under that.
    The Build Source Files.jpg file shows most of the list of the files that should be "Always Included". Notice the .VI and .ctl files that are listed
    The Build Directory.jpg file shows the file in the Build directory that were built.
    The Data Directory.jpg file shows the data directory under the Build directory and may include some of the files listed in the "Always Include", but not all of them.
    The other subdirectories under the Build directory were created by me and do not include any files that were copied during the Build process.
    So not ALL of the files that were included in the "Always Include" list were copied into the Build directory area as expected. ALL of the files that are listed as "Always Include" should be copied, if they exist. Those files existed when then were selected for the List and they existed at the time of the Build.
    I can not include an example project that demonstrates this. I am prevented from doing so by the terms of an NDA. You are going to have to take my word that this event is real and happens the same way every time. This information should be sufficient for someone to investigate why do not ALL of the files listed in the "Always Include" list are copied into the Build directory area regardless of the file type or contents.
    Attachments:
    Build Source Files.jpg ‏151 KB
    Build Directory.jpg ‏125 KB
    Data Directory.jpg ‏131 KB

  • Changes made in book file are not reflected in RH when book is updated

    I'm using RH7 in TCS1.  (I know, I know, everybody else is on RH8 in TCS2). I've added a book file by reference to my project. Then I made a few changes to titles in my FM book, then updated my project, but none of the changes have been made in RH.
    Any ideas?

    You're not the only one using TCS1. I, too, must endure Adobe's initial FM-RH Integration software offering with its limited patches and multiple workarounds (I don't sound bitter, do I?).
    Do you have the latest patches?
    When you say you modified titles in your FM book, did you modify the document titles from the book file, thereby changing the file names? Or did you change heading styles within a FM document/chapter?
    If you changed the file name in any way, verify in the RH Project Manager that all links to the referenced FM files are not broken. If any file links are broken, you can resolve them in the RH Project Manager.
    Changing a heading name within a FM document should not cause you this grief, as long as the file links between FM and RH remain intact.
    As I don't know your level of experience, I'll make an suggestion to someone new to FM-RH integration (although, since you're using TCS1, I presume you are an experienced user). When updating the RH project, are you selecting Force Update or Update All. Force Update applies changes made in FM to your RH project. Update All only applies changes made in RH.
    Also, RH has a feature that allows you to select specific topics to ignore when running a Force Update (i.e. changes in FM won't be applied to the selected topics). Make sure no topics are selected for this purpose.
    If all else fails (and I don't recommend this unless you tried every other possibility), delete and re-import the book. There's another thread that helps you through this process without you having to manually reapply your settings.
    Good luck!

  • Data Guard. My archive log files are not applied.

    I have one problem with Data Guard. My archive log files are not applied. However I have received all archive log files to my physical Standby db
    I have created a Physical Standby database on Oracle 10gR2 (Windows XP professional). Primary database is on another computer.
    In Enterprise Manager on Primary database it looks ok. I get the following message “Data Guard status Normal”
    But as I wrote above ”the archive log files are not applied”
    After I created the Physical Standby database, I have also done:
    1. I connected to the Physical Standby database instance.
    CONNECT SYS/SYS@luda AS SYSDBA
    2. I started the Oracle instance at the Physical Standby database without mounting the database.
    STARTUP NOMOUNT PFILE=C:\oracle\product\10.2.0\db_1\database\initluda.ora
    3. I mounted the Physical Standby database:
    ALTER DATABASE MOUNT STANDBY DATABASE
    4. I started redo apply on Physical Standby database
    alter database recover managed standby database disconnect from session
    5. I switched the log files on Physical Standby database
    alter system switch logfile
    6. I verified the redo data was received and archived on Physical Standby database
    select sequence#, first_time, next_time from v$archived_log order by sequence#
    SEQUENCE# FIRST_TIME NEXT_TIME
    3 2006-06-27 2006-06-27
    4 2006-06-27 2006-06-27
    5 2006-06-27 2006-06-27
    6 2006-06-27 2006-06-27
    7 2006-06-27 2006-06-27
    8 2006-06-27 2006-06-27
    7. I verified the archived redo log files were applied on Physical Standby database
    select sequence#,applied from v$archived_log;
    SEQUENCE# APP
    4 NO
    3 NO
    5 NO
    6 NO
    7 NO
    8 NO
    8. on Physical Standby database
    select * from v$archive_gap;
    No rows
    9. on Physical Standby database
    SELECT MESSAGE FROM V$DATAGUARD_STATUS;
    MESSAGE
    ARC0: Archival started
    ARC1: Archival started
    ARC2: Archival started
    ARC3: Archival started
    ARC4: Archival started
    ARC5: Archival started
    ARC6: Archival started
    ARC7: Archival started
    ARC8: Archival started
    ARC9: Archival started
    ARCa: Archival started
    ARCb: Archival started
    ARCc: Archival started
    ARCd: Archival started
    ARCe: Archival started
    ARCf: Archival started
    ARCg: Archival started
    ARCh: Archival started
    ARCi: Archival started
    ARCj: Archival started
    ARCk: Archival started
    ARCl: Archival started
    ARCm: Archival started
    ARCn: Archival started
    ARCo: Archival started
    ARCp: Archival started
    ARCq: Archival started
    ARCr: Archival started
    ARCs: Archival started
    ARCt: Archival started
    ARC0: Becoming the 'no FAL' ARCH
    ARC0: Becoming the 'no SRL' ARCH
    ARC1: Becoming the heartbeat ARCH
    Attempt to start background Managed Standby Recovery process
    MRP0: Background Managed Standby Recovery process started
    Managed Standby Recovery not using Real Time Apply
    MRP0: Background Media Recovery terminated with error 1110
    MRP0: Background Media Recovery process shutdown
    Redo Shipping Client Connected as PUBLIC
    -- Connected User is Valid
    RFS[1]: Assigned to RFS process 2148
    RFS[1]: Identified database type as 'physical standby'
    Redo Shipping Client Connected as PUBLIC
    -- Connected User is Valid
    RFS[2]: Assigned to RFS process 2384
    RFS[2]: Identified database type as 'physical standby'
    Redo Shipping Client Connected as PUBLIC
    -- Connected User is Valid
    RFS[3]: Assigned to RFS process 3188
    RFS[3]: Identified database type as 'physical standby'
    Primary database is in MAXIMUM PERFORMANCE mode
    Primary database is in MAXIMUM PERFORMANCE mode
    RFS[3]: No standby redo logfiles created
    Redo Shipping Client Connected as PUBLIC
    -- Connected User is Valid
    RFS[4]: Assigned to RFS process 3168
    RFS[4]: Identified database type as 'physical standby'
    RFS[4]: No standby redo logfiles created
    Primary database is in MAXIMUM PERFORMANCE mode
    RFS[3]: No standby redo logfiles created
    10. on Physical Standby database
    SELECT PROCESS, STATUS, THREAD#, SEQUENCE#, BLOCK#, BLOCKS FROM V$MANAGED_STANDBY;
    PROCESS STATUS THREAD# SEQUENCE# BLOCK# BLOCKS
    ARCH CONNECTED 0 0 0 0
    ARCH CONNECTED 0 0 0 0
    ARCH CONNECTED 0 0 0 0
    ARCH CONNECTED 0 0 0 0
    ARCH CONNECTED 0 0 0 0
    ARCH CONNECTED 0 0 0 0
    ARCH CONNECTED 0 0 0 0
    ARCH CONNECTED 0 0 0 0
    ARCH CONNECTED 0 0 0 0
    ARCH CONNECTED 0 0 0 0
    ARCH CONNECTED 0 0 0 0
    ARCH CONNECTED 0 0 0 0
    ARCH CONNECTED 0 0 0 0
    ARCH CONNECTED 0 0 0 0
    ARCH CONNECTED 0 0 0 0
    ARCH CONNECTED 0 0 0 0
    ARCH CONNECTED 0 0 0 0
    ARCH CONNECTED 0 0 0 0
    ARCH CONNECTED 0 0 0 0
    ARCH CONNECTED 0 0 0 0
    ARCH CONNECTED 0 0 0 0
    ARCH CONNECTED 0 0 0 0
    ARCH CONNECTED 0 0 0 0
    ARCH CONNECTED 0 0 0 0
    ARCH CONNECTED 0 0 0 0
    ARCH CONNECTED 0 0 0 0
    ARCH CONNECTED 0 0 0 0
    ARCH CONNECTED 0 0 0 0
    ARCH CONNECTED 0 0 0 0
    ARCH CONNECTED 0 0 0 0
    RFS IDLE 0 0 0 0
    RFS IDLE 0 0 0 0
    RFS IDLE 1 9 13664 2
    RFS IDLE 0 0 0 0
    10) on Primary database:
    select message from v$dataguard_status;
    MESSAGE
    ARC0: Archival started
    ARC1: Archival started
    ARC2: Archival started
    ARC3: Archival started
    ARC4: Archival started
    ARC5: Archival started
    ARC6: Archival started
    ARC7: Archival started
    ARC8: Archival started
    ARC9: Archival started
    ARCa: Archival started
    ARCb: Archival started
    ARCc: Archival started
    ARCd: Archival started
    ARCe: Archival started
    ARCf: Archival started
    ARCg: Archival started
    ARCh: Archival started
    ARCi: Archival started
    ARCj: Archival started
    ARCk: Archival started
    ARCl: Archival started
    ARCm: Archival started
    ARCn: Archival started
    ARCo: Archival started
    ARCp: Archival started
    ARCq: Archival started
    ARCr: Archival started
    ARCs: Archival started
    ARCt: Archival started
    ARCm: Becoming the 'no FAL' ARCH
    ARCm: Becoming the 'no SRL' ARCH
    ARCd: Becoming the heartbeat ARCH
    Error 1034 received logging on to the standby
    Error 1034 received logging on to the standby
    LGWR: Error 1034 creating archivelog file 'luda'
    LNS: Failed to archive log 3 thread 1 sequence 7 (1034)
    FAL[server, ARCh]: Error 1034 creating remote archivelog file 'luda'
    11)on primary db
    select name,sequence#,applied from v$archived_log;
    NAME SEQUENCE# APP
    C:\ORACLE\PRODUCT\10.2.0\ORADATA\IRINA\ARC00003_0594204176.001 3 NO
    C:\ORACLE\PRODUCT\10.2.0\ORADATA\IRINA\ARC00004_0594204176.001 4 NO
    Luda 4 NO
    Luda 3 NO
    C:\ORACLE\PRODUCT\10.2.0\ORADATA\IRINA\ARC00005_0594204176.001 5 NO
    Luda 5 NO
    C:\ORACLE\PRODUCT\10.2.0\ORADATA\IRINA\ARC00006_0594204176.001 6 NO
    Luda 6 NO
    C:\ORACLE\PRODUCT\10.2.0\ORADATA\IRINA\ARC00007_0594204176.001 7 NO
    Luda 7 NO
    C:\ORACLE\PRODUCT\10.2.0\ORADATA\IRINA\ARC00008_0594204176.001 8 NO
    Luda 8 NO
    12) on standby db
    select name,sequence#,applied from v$archived_log;
    NAME SEQUENCE# APP
    C:\ORACLE\PRODUCT\10.2.0\ORADATA\LUDA\ARC00004_0594204176.001 4 NO
    C:\ORACLE\PRODUCT\10.2.0\ORADATA\LUDA\ARC00003_0594204176.001 3 NO
    C:\ORACLE\PRODUCT\10.2.0\ORADATA\LUDA\ARC00005_0594204176.001 5 NO
    C:\ORACLE\PRODUCT\10.2.0\ORADATA\LUDA\ARC00006_0594204176.001 6 NO
    C:\ORACLE\PRODUCT\10.2.0\ORADATA\LUDA\ARC00007_0594204176.001 7 NO
    C:\ORACLE\PRODUCT\10.2.0\ORADATA\LUDA\ARC00008_0594204176.001 8 NO
    13) my init.ora files
    On standby db
    irina.__db_cache_size=79691776
    irina.__java_pool_size=4194304
    irina.__large_pool_size=4194304
    irina.__shared_pool_size=75497472
    irina.__streams_pool_size=0
    *.audit_file_dest='C:\oracle\product\10.2.0\admin\luda\adump'
    *.background_dump_dest='C:\oracle\product\10.2.0\admin\luda\bdump'
    *.compatible='10.2.0.1.0'
    *.control_files='C:\oracle\product\10.2.0\oradata\luda\luda.ctl'
    *.core_dump_dest='C:\oracle\product\10.2.0\admin\luda\cdump'
    *.db_block_size=8192
    *.db_domain=''
    *.db_file_multiblock_read_count=16
    *.db_file_name_convert='luda','irina'
    *.db_name='irina'
    *.db_unique_name='luda'
    *.db_recovery_file_dest='C:\oracle\product\10.2.0\flash_recovery_area'
    *.db_recovery_file_dest_size=2147483648
    *.dispatchers='(PROTOCOL=TCP) (SERVICE=irinaXDB)'
    *.fal_client='luda'
    *.fal_server='irina'
    *.job_queue_processes=10
    *.log_archive_config='DG_CONFIG=(irina,luda)'
    *.log_archive_dest_1='LOCATION=C:/oracle/product/10.2.0/oradata/luda/ VALID_FOR=(ALL_LOGFILES, ALL_ROLES) DB_UNIQUE_NAME=luda'
    *.log_archive_dest_2='SERVICE=irina LGWR ASYNC VALID_FOR=(ONLINE_LOGFILES, PRIMARY_ROLE) DB_UNIQUE_NAME=irina'
    *.log_archive_dest_state_1='ENABLE'
    *.log_archive_dest_state_2='ENABLE'
    *.log_archive_max_processes=30
    *.log_file_name_convert='C:/oracle/product/10.2.0/oradata/irina/','C:/oracle/product/10.2.0/oradata/luda/'
    *.open_cursors=300
    *.pga_aggregate_target=16777216
    *.processes=150
    *.remote_login_passwordfile='EXCLUSIVE'
    *.sga_target=167772160
    *.standby_file_management='AUTO'
    *.undo_management='AUTO'
    *.undo_tablespace='UNDOTBS1'
    *.user_dump_dest='C:\oracle\product\10.2.0\admin\luda\udump'
    On primary db
    irina.__db_cache_size=79691776
    irina.__java_pool_size=4194304
    irina.__large_pool_size=4194304
    irina.__shared_pool_size=75497472
    irina.__streams_pool_size=0
    *.audit_file_dest='C:\oracle\product\10.2.0/admin/irina/adump'
    *.background_dump_dest='C:\oracle\product\10.2.0/admin/irina/bdump'
    *.compatible='10.2.0.1.0'
    *.control_files='C:\oracle\product\10.2.0\oradata\irina\control01.ctl','C:\oracle\product\10.2.0\oradata\irina\control02.ctl','C:\oracle\product\10.2.0\oradata\irina\control03.ctl'
    *.core_dump_dest='C:\oracle\product\10.2.0/admin/irina/cdump'
    *.db_block_size=8192
    *.db_domain=''
    *.db_file_multiblock_read_count=16
    *.db_file_name_convert='luda','irina'
    *.db_name='irina'
    *.db_recovery_file_dest='C:\oracle\product\10.2.0/flash_recovery_area'
    *.db_recovery_file_dest_size=2147483648
    *.dispatchers='(PROTOCOL=TCP) (SERVICE=irinaXDB)'
    *.fal_client='irina'
    *.fal_server='luda'
    *.job_queue_processes=10
    *.log_archive_config='DG_CONFIG=(irina,luda)'
    *.log_archive_dest_1='LOCATION=C:/oracle/product/10.2.0/oradata/irina/ VALID_FOR=(ALL_LOGFILES, ALL_ROLES) DB_UNIQUE_NAME=irina'
    *.log_archive_dest_2='SERVICE=luda LGWR ASYNC VALID_FOR=(ONLINE_LOGFILES, PRIMARY_ROLE) DB_UNIQUE_NAME=luda'
    *.log_archive_dest_state_1='ENABLE'
    *.log_archive_dest_state_2='ENABLE'
    *.log_archive_max_processes=30
    *.log_file_name_convert='C:/oracle/product/10.2.0/oradata/luda/','C:/oracle/product/10.2.0/oradata/irina/'
    *.open_cursors=300
    *.pga_aggregate_target=16777216
    *.processes=150
    *.remote_login_passwordfile='EXCLUSIVE'
    *.sga_target=167772160
    *.standby_file_management='AUTO'
    *.undo_management='AUTO'
    *.undo_tablespace='UNDOTBS1'
    *.user_dump_dest='C:\oracle\product\10.2.0/admin/irina/udump'
    Please help me!!!!

    Hi,
    After several tries my redo logs are applied now. I think in my case it had to do with the tnsnames.ora. At this moment I have both database in both tnsnames.ora files using the SID and not the SERVICE_NAME.
    Now I want to use DGMGRL. Adding a configuration and a stand-by database is working fine, but when I try to enable the configuration DGMGRL gives no feedback and it looks like it is hanging. The log, although says that it succeeded.
    In another session 'show configuration' results in the following, confirming that the enable succeeded.
    DGMGRL> show configuration
    Configuration
    Name: avhtest
    Enabled: YES
    Protection Mode: MaxPerformance
    Fast-Start Failover: DISABLED
    Databases:
    avhtest - Primary database
    avhtestls53 - Physical standby database
    Current status for "avhtest":
    Warning: ORA-16610: command 'ENABLE CONFIGURATION' in progress
    It there anybody that experienced the same problem and/or knows the solution to this?
    With kind regards,
    Martin Schaap

  • JavaScript files are not being updated while updating managed solution over Dynamics CRM Online

    Hi Support,
    While I am updating a managed solution over Dynamics CRM 2013 Online, JavaScript files are not being updated and is showing the source as of the last version of the managed solution. 
    I tried the same versions of solution on my CRM 2013 on-premise install (test organization) and it updated successfully.
    This is a bit urgent issue. Please suggest how to resolve this.
    Online version of the CRM is
    Microsoft Dynamics® CRM Online Spring '14
    (6.1.1.1855) (DB 6.1.1.1847)
    blog: <a href="http://technologynotesforyou.wordpress.com">http://technologynotesforyou.wordpress.com</a> | skype: ali.net.pk

    Our technical team managed to find the immediate cause for the problem, and a solution.
    According to them there was a corruption on a speciffic OLAP file. By deleting it, they allowed it to be recreated on the next application processing. The file in question was found in \Microsoft SQL Server\MSSQL.2\OLAP\Data\UGF.0.db\<APPLICATION>.38.cub.xml
    Where <APPLICATION> is the name of the problematic cube.
    After that everything is working.

  • Files are not deleted after auto export

    Hi folks,
    I am using Oracle UCM 11gPS6 in Redhat Linux 5 OS.I have set automatic export based on certain docType.While setting this export,I have marked "Delete files after revisions".
    But when I automate this process,files are not getting deleted.
    Am I missing something or is this feature not available in this product?
    Any help will be appreciated.
    Regards,

    Haven't you asked the same thing in the thread Re: Setting of automatic replicator ?

  • Files are not getting updated in sharepoint 2013 because of office upload center error

    Dear Team,
    I am getting upload failed/upload error in Office Upload Center.
    Scenario: I opened excel(version is 2013) file from sharepoint 2013 application and closed and after updating. Later when I opened the file I got error like "UPLOAD FAILED We are sorry this didn't work. Try saving again later and if that still doesn't
    work, click save a copy."
    I found the error is because file is getting upload failed / upload error in microsoft office upload center2013. 
    Please let me know if anyone know the solution for my issues
    Thanks in Advance
    Girish

    Hi Girishkg,
    The default IIS limit for the upload file size is 30MB. If the selected files are larger than 30MB, the files are not uploaded.
    The limit can be set in web application’s web.config file or in IIS .
    There are two detailed articles about setting the limit:
    http://www.brainlitter.com/2009/07/13/sharepointcannot-upload-documents-larger-than-30mb-on-windows-server-2008-or-sbs-2008-application-servers/
    http://expectedexception.wordpress.com/2011/02/08/upload-multiple-files-fail-without-error/
    Feel free to reply if the issue still exists.
    Best regards
    Wendy Li
    TechNet Community Support

  • Since changing our computer I have been unable to download ebooks to my Reader Library I get a message Some file types associated with EPUB files are not associated with Reader Library; Waterstones suggest that I may have accidentally created a new Adobe

    When I try to download them from the Waterstones website I get a message saying:
    ‘Some file types associated with EPUB files are not associated with Reader Library.  Do you want to associate them now?  When I reply yes I get another message; ‘Configuration error unable to update EPUB files check network firewall and try again’.
    The ‘books’ are saved in the Download directory and I can’t transfer them from there to my E-Reader. I have not had any problems before, it was very simple; I saved the download and it automatically went into the Reader Library.
    I contacted HP and they said it is a software error and suggested I contact Waterstones.  I contacted Waterstones Customer Support and got the following response:
    As the error message is specifically mentioning the firewall it does sound like something in the firewall settings is stopping the download from taking place correctly. However, the files should not be being saved to the Download folder. It would be worth trying again by going to your Digital Order History on your Waterstones.com account and pressing the download button, and then making sure to press "Open" not "Save". When you press Open rather than Save it should give the option to open the file with Adobe Digital Editions. If the firewall message still comes up then I'm afraid something is blocking it on your end.
    If the above "Open" download method works but you then still get an error message it could possibly be that you have accidentally created a new Adobe ID when setting up on the new computer, rather than signing in with your old Adobe ID. It would be worth trying the aforementioned download technique again first, but if problems did still persist it would be worth calling Adobe themselves on 0207 365 0735, as they should be able to sort out any account issue.
      In response to the first para of Waterstones email I already do what they suggest I do press ‘Open’ not ‘Save’ but I don’t get the open with Adobe Digital Editions (we have installed Adobe Digital Editions on the new computer. Waterstones say we may have ‘accidentally created a new Adobe ID when setting up the new computer’ does that mean that we shouldn’t have installed Adobe Digital Editions on the new computer as it would have already been there? How do I sign in with my old Adobe ID? 

    Hi all after attampting to get some supoport from adobe by phone.... nice people infurating policys as far as support for digital editions or DRM is conserned... However I got no where with support.
    I ended up instaling Digital editions on my desktop PC and going through the motions of registering and borrowing a book then returning it. Then I trying on my iPad, Bluefire worked, Over drive did not so I completely removed Overdrive and reinstalled and re registered. all working now.
    Maybe some one at adobe did something. Maybe the install of the adobe DE client on a PC corrected what ever was out of wack with my account. Mayby the server that my account lives on did a scan disk and corrected a bad clustrer.
    What ever happend My account is actiove and working again. hope this helps others.

  • Why does iTunes freeze up for minutes at a time when modifying INFO (CMD-i) ?  My files are not corrupted after it is done like many other threads i have readed.

    Why does iTunes freeze up for minutes at a time when modifying INFO (CMD-i) ?  My files are not corrupted after it is done like many other threads i have readed.  Sometimes it's changing the title of a movie or editing the season and episode number of a TV show ect.....

    Yup same here
    I am running the latest iTunes, the latest updates to the OS and on an iMac 3.4GHz Quad core i7 with 8GB of RAM and the music stored on local HDD.
    Still locks up iTunes for between 2 minutes up to 20 minutes.
    Really annoying.
    If you find a fix please, please let me know, I have just been throwing hardware at it with no joy at all

  • I upgraded to Maverick O/S and I can no longer right click on iPhoto images to find my photo files.  My photo files are not where they were before upgrade.

    I upgraded to Maverick O/S and I can no longer right click on iPhoto images to find my photo files.  My photo files are not where they were before upgrade.

    Have you checked the sorting settings to make sure they are as you expect?
    OT

Maybe you are looking for

  • If you don't know what to do anymore(Written by Bas)

    If you don't know what to do anymore because drivers won't install, you might try this. Hi there, * This article is not really for newbies, but you might give it a try. * * Read it thru the end before you do anything!!!!!!!!!!!!!!!!!!!!!!!!!!!! * I w

  • In need of an answer desperately!

    I've been trying to burn this project over a week!  Initially, my ISO file would end up being larger than what Encore showed and it wouldnt fit on the BD.  You guys helped me realize that a blank disc only has 22.5GB.  I thought i would solve my prob

  • Set G/L Accounts By: Warehouse o

    Hi, Can any one please explain me the complete difference between setting G/L Account By Item Group, Item Level and Warehouse? I would be very convinced if the journals are explained and the effects on the G/L Account posting listed discretely. Which

  • Terrible dl speeds

    Kind of getting fed up now, I either have really slow speeds or inconsistent connection. I am a heavy user, with playing games online and streaming movies and tv, so I pay for unlimited up to 20mb bb. Its not like I expect 20mb bb, but a little bit o

  • Annoying album cover updates

    Hello everyone. Issue with iTunes 7.0.2 here. When I add music, from anywhere, any source, even though in preferences, under the "General" tab, I have the "download missing album artwork" unchecked, for some inane reason while the songs are being add