SQLNet Configuration for Oracle 7.1.5 on VMS 6.2 Alpha Server
We have Oracle 9i installed on a SUN Solaris Server.
We are using Oracle 8i's OAS version 4.0.8.1.
I have another user who has an Oracle database version
7.1.5.2.3 running on VMS O/S 6.2 Alpha server.
This user want to connect to our Server and use the
OAS to create web pages.
How can I configure this database using SQLNet ?
What all things I should do to configure the 7.1.5
database to be connected to our server?
Is it possible?
Any help greatly appreciated.
Mercy.
You simply have to find that library and copy it to /usr/X11R6/lib . I installed everything related to X and then found libXpm* in /usr/i486-linux-libc5/lib .
Best of lick.
Similar Messages
-
Internal disk configuration for oracle
Hi experts
I need some guidance for internal disk configuration for oracle
requirements are for 2 node clustered VM on linux OS OEL
the OS will be for RAC, OEM
will RAID 5 be optimal setting
this is not production env
thanks912919 wrote:
Hi experts
I need some guidance for internal disk configuration for oracle
requirements are for 2 node clustered VM on linux OS OEL
the OS will be for RAC, OEM
will RAID 5 be optimal settingFor most definition of "optimal" the answer is "NO"
RAID+10 provides better performance.
Handle: 912919
Status Level: Newbie
Registered: Feb 7, 2012
Total Posts: 135
Total Questions: 74 (46 unresolved)
why do you waste time here when you rarely get your questions answered? -
Hardware Configuration for Oracle DB on DELL Server
We are currently running Oracle 8.0.5 on Windows 2000 Advanced Server. This is a DELL PowerEdge 6600 server with 8 73GB Ultra SCSI Hard Drives. We will be upgrading to Oracle 9i in the future. Question: What would be the recommended Hardware RAID Configuration? We've heard that RAID 10 would be a good configuration to implement. What would be the best way for us to configure our server? We would like a high fault tolerance, good performance system. Our database isn't very large in size (10GB) but, we do require 24 x 7 availability. By the way, switching to a different operating system is not an option for us.
You've probably read this already; but, the documentation has some minimums: http://docs.oracle.com/cd/E26996_01/e18548/CHDJCIFD.html
The management server doesn't require anything special.
Regards,
Ian -
Error starting Portal or Commerce Server when Configured for Oracle
I've been attempting to configure Portal 4.0 to work with Oracle. I'm running Oracle
8i. I carefully followed the instructions found in "Configuring WebLogic Portal for
Oracle Databases". Specifically, I setup the tablespaces, connection pools and successfully
run the scripts to populate the tables. I am confident the Oracle OCI driver is configured
properly (have done this many times). However, after I make all of the necessary
changes and launch the server, I receive the following error:
Starting WebLogic Server ....
<Jun 26, 2002 4:47:32 AM PDT> <Notice> <Management> <Loading configuration file .\config\wlcsDomain\config.xml
..> <Jun 26, 2002 4:47:39 AM PDT> <Emergency> <Server> <Unable to initialize the
server: 'Fatal initialization exception
Throwable: java.lang.IllegalAccessError: Exception[com.bea.p13n.security.realm.RDBMSException:
An error occured creating a database connection for the realm.]
java.lang.IllegalAccessError: Exception[com.bea.p13n.security.realm.RDBMSException:
An error occured creating a database connection for the realm.]
at weblogic.security.acl.Realm.getRealm(Realm.java:91)
at weblogic.security.acl.Realm.getRealm(Realm.java:62)
at weblogic.security.SecurityService.initializeRealm(SecurityService.java:258)
at weblogic.security.SecurityService.initialize(SecurityService.java:115)
at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:402)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:202)
at weblogic.Server.main(Server.java:35)
'>
The WebLogic Server did not start up properly.
Exception raised:
java.lang.IllegalAccessError: Exception[com.bea.p13n.security.realm.RDBMSException:
An error occured creating a database connection for the realm.]
at weblogic.security.acl.Realm.getRealm(Realm.java:91)
at weblogic.security.acl.Realm.getRealm(Realm.java:62)
at weblogic.security.SecurityService.initializeRealm(SecurityService.java:258)
at weblogic.security.SecurityService.initialize(SecurityService.java:115)
at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:402)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:202)
at weblogic.Server.main(Server.java:35)
Reason: Fatal initialization exception
The startup appears to have trouble with the RDBMS security realm. I tried a) leaving
the settings "as-is", configured for Cloudscape, or b) modified to point to my instance
of Oracle (are their additional things I need to load in Oracle to support it using
the RDBMS realm). Is there a way I can disable the security realm to at least get
the server up-and-running (via the web.xml). I've installed and reinstalled many
times, trying various combinations of things.
Any help would be hugely appreciated!
Thanks,
jeffI finally found this bug in the release notes, i'm surprised one of the bea guys couldn't
answer this....
"Mike Friesen" <[email protected]> wrote:
>
I had the same type of problem with portal 4.0. Trying downloading the
newest 7.0, I found it works much better.
Mike
"K C" <[email protected]> wrote in message news:[email protected]...
I found this as well. However, i still am not able to run the portal afterconfiguring
for oracle. While running create_all, i get many errors like "can binda
LONG value
only for insert into a LONG column"
the table are being created, this appears to occur in the "insertingrequired bootstrap
data" phase.
thanks
"Joshua Davies" <[email protected]> wrote:
You probably followed the instructions too closely. I had the same
problem,
due to
something that's not quite a "bug" in the installation instructions.Look
back at
the section "Update Settings for the RDBMS Security Realm" in thedeployment
guide
(http://edocs.bea.com/wlp/docs40/deploygd/oraclnew.htm#1039294).
In the table in step 2, they show the URL on top, and the Driverclassname
underneath
it. HOWEVER... on the actual data screen, the Driver is on top and the
URL is underneath
it. If you're not being very very careful, it's easy to swap thesetwo
values
and put the URL in the Driver input box and the Driver in the URL input
box. Make
sure you haven't accidentally done this; if you have, you can stillchange
this in
the config.xml file (do a text search for an element RDBMSRealm withan
"name" attribute
of "wlcsRealm").
Verify that it looks like this:
<RDBMSRealm DatabaseDriver="weblogic.jdbc.oci.Driver"
DatabaseURL="jdbc:weblogic:oracle"
Name="wlcsRealm"
and not this:
<RDBMSRealm DatabaseDriver="jdbc:weblogic:oracle"
DatabaseURL="weblogic.jdbc.oci.Driver"
Name="wlcsRealm"
Very subtle gotcha...
"Jeff Davis" <[email protected]> wrote:
I've been attempting to configure Portal 4.0 to work with Oracle. I'm
running
Oracle
8i. I carefully followed the instructions found in "Configuring WebLogic
Portal for
Oracle Databases". Specifically, I setup the tablespaces, connectionpools
and successfully
run the scripts to populate the tables. I am confident the Oracle OCIdriver
is configured
properly (have done this many times). However, after I make all of thenecessary
changes and launch the server, I receive the following error:
Starting WebLogic Server ....
<Jun 26, 2002 4:47:32 AM PDT> <Notice> <Management> <Loading
configuration
file .\config\wlcsDomain\config.xml
...> <Jun 26, 2002 4:47:39 AM PDT> <Emergency> <Server> <Unable toinitialize
the
server: 'Fatal initialization exception
Throwable: java.lang.IllegalAccessError:Exception[com.bea.p13n.security.realm.RDBMSException:
An error occured creating a database connection for the realm.]
java.lang.IllegalAccessError:Exception[com.bea.p13n.security.realm.RDBMSException:
An error occured creating a database connection for the realm.]
at weblogic.security.acl.Realm.getRealm(Realm.java:91)
at weblogic.security.acl.Realm.getRealm(Realm.java:62)
atweblogic.security.SecurityService.initializeRealm(SecurityService.java:258)
atweblogic.security.SecurityService.initialize(SecurityService.java:115)
at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:402)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:202)
at weblogic.Server.main(Server.java:35)
'>
The WebLogic Server did not start up properly.
Exception raised:
java.lang.IllegalAccessError:Exception[com.bea.p13n.security.realm.RDBMSException:
An error occured creating a database connection for the realm.]
at weblogic.security.acl.Realm.getRealm(Realm.java:91)
at weblogic.security.acl.Realm.getRealm(Realm.java:62)
atweblogic.security.SecurityService.initializeRealm(SecurityService.java:258)
atweblogic.security.SecurityService.initialize(SecurityService.java:115)
at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:402)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:202)
at weblogic.Server.main(Server.java:35)
Reason: Fatal initialization exception
The startup appears to have trouble with the RDBMS security realm. Itried
a) leaving
the settings "as-is", configured for Cloudscape, or b) modified to point
to my instance
of Oracle (are their additional things I need to load in Oracle tosupport
it using
the RDBMS realm). Is there a way I can disable the security realm toat
least get
the server up-and-running (via the web.xml). I've installed andreinstalled
many
times, trying various combinations of things.
Any help would be hugely appreciated!
Thanks,
jeff -
HRMS Analytics configuration for Oracle EBS
Hi ,
I have to configure HRMS Analytics for Oracle EBS(Referring Configuration Guide for OBIA 7.9.6.3) , I am new to OBIA :
I just started working domain Values (csv files), I have few queries for the same:
1. Is is necessary to Use the query mentioned in the OBIA Setup guide , to get the Domain Values. Can we use different query to extract the Domain Values ?
What is the effect if query is changed ?
2. Some csv are for 11i instance ,so does it mean , it is not required to configure those csv files for R12 ?
Any help in this regard will be highly appreciated.
Thanks,
RaziHere are the answers to the questions:
1. Is is necessary to Use the query mentioned in the OBIA Setup guide , to get the Domain Values. Can we use different query to extract the Domain Values ?
What is the effect if query is changed ?
A: Not necessairily. The query is there to help you gather the relevant data but this is a functional exercise. If a HR Functional person on your team can identify the relevant domains, events, etc, then you can populate it manually. The goal is to get the relevant EBS domain values and map to the BI requirements. The query is a fast way to get the list of the existing values from the EBS DB.
2. Some csv are for 11i instance ,so does it mean , it is not required to configure those csv files for R12 ?
A: If the COnfig Guide specifically has a section for R12 versus 11..then you need to follow for the version you are on. However, there are general "EBS" configurations that you need to do for both versions. Rule of thumb, if it doesnt specific the version, then it needs to be done for both.
If helpful, pls mark correct or helpful -
Hello expert,
I have two configureation in configuration file for oracle database as follows:
PRODDW.WORLD=
(DESCRIPTION=
(ADDRESS=
(PROTOCOL=TCP)
(HOST=10.10.10.40)
(PORT=1521)
(CONNECT_DATA=
(SERVICE_NAME=proddw)
PRODDW=
(DESCRIPTION=
(ADDRESS=
(PROTOCOL=TCP)
(HOST=10.10.10.40)
(PORT=1521)
(CONNECT_DATA=
(SERVICE_NAME=proddw)
I can see "PRODDW" in the ODBC, but PRODDW.WORLD seems exact same as PRODDW in the above. so please tell me what is PRODDW.WORLD? why they are same?918440 wrote:
Hello expert,
I have two configureation in configuration file for oracle database as follows:
PRODDW.WORLD=
(DESCRIPTION=
(ADDRESS=
(PROTOCOL=TCP)
(HOST=10.10.10.40)
(PORT=1521)
(CONNECT_DATA=
(SERVICE_NAME=proddw)
PRODDW=
(DESCRIPTION=
(ADDRESS=
(PROTOCOL=TCP)
(HOST=10.10.10.40)
(PORT=1521)
(CONNECT_DATA=
(SERVICE_NAME=proddw)
I can see "PRODDW" in the ODBC, but PRODDW.WORLD seems exact same as PRODDW in the above. so please tell me what is PRODDW.WORLD? why they are same?ask the person who created the file.
so me folks do silly & needless things?
why are you bothered by seeing duplicate & redundant details? -
Best Hardware Configuration for oracle RAC
Hi,
iam planning to implement oracle 10g and 11g rac.Can anyone of you provide me the best hardware configuration which suits the need.
I can spend a reasonale amount.
This is for homesetup,implementation and practice all major activities that's all.
So please provide me a nice coniguration.
Iam planning to install vmware server and create multiple instances in the same server
Please provide me a nice configuration which suits for implementing installing vmware server
Thanks,
Aram
Edited by: aram on Sep 23, 2011 8:08 AMaram wrote:
Hi,
iam planning to implement oracle 10g and 11g rac.Can anyone of you provide me the best hardware configuration which suits the need.
I can spend a reasonale amount.
This is for homesetup,implementation and practice all major activities that's all.
So please provide me a nice coniguration.
Iam planning to install vmware server and create multiple instances in the same server
Please provide me a nice configuration which suits for implementing installing vmware server
Thanks,
Aram
HI,
For your home testing you might need a latest technology to get a smooth and fast installation. i7 processor might be the ideal with memory at least 8GB. if you're planning to have more than 3 VMs running at the same time than you need 12-16GB memory at least.
From my experience installing on vm and allocated memory 2.5GB each VM the installation could take 15-30minutes
Cheers -
Hardware Configurations for Oracle 10g AS
Hi,
I'm looking for Hardware Configurations on various platforms which Oracle AS 10g supports. Basically i'm looking for details for these on each supported platforms.
No. Of CPUs
CPU Speed
RAM
Disk Space
I would appreciate if someone point me some document on this.
Thanks,
RKThose parameters are more of a function of intended use (ie the application and which components of AS involved). There are absolute minimum values to enable installation (not use) of the software in each platforms Install Guide.
For certified platforms, check with you sales contact or Oracle Support. -
Recommended configuration for Oracle VM Server and VM Manager
Hi,
Currently we have two dedicated DELL servers (VM server and VM Manager) for which are building an Oracle stack environment.
We are facing a problem which we didn't find answer from Oracle docs or via Google. The problem is that the virtual machines we create in VM Manager can't be connected to the outside world, and we think it's because our host (Hetzner) does not allow ports eth1-eth3 to be connected to the servers, unless we have these servers in the same rack and connected via switch.
Our question is, is it recommended configuration to have VM Server and VM Manager servers in the same rack and connected via switch?
If yes, the next question is, if we need in the future to add one more dedicated DELL server to our configuration to host virtual machines, is it possible if the new third dedicated DELL server is not connected via switch to the two dedicated DELL servers we have already have?
If no, the next question is, what could be the recommended configuration and solution to our problem in our case that ports eth1-eth3 cannot be connected to the servers?
Please do not hesitate to ask if you need more information. I do appreciate your time and expertise. Thanks.The architectural environment is now done like on this graphic. For security reasons Hetzner hosting service does not allow ports eth1-eth3 to be connected, but in internal network under switch they do.
-
Solaris SMF configuration for Oracle CSS service
Below is the code to create oracle CSS service with solaris SMF, it will create smf service with instance name as "default" where as i need to change it to "css"
svc:/application/oracle/css:default
change service instance name to
svc:/application/oracle/css:css
i don't know about smf and xml, can somebody help me to change css service name ?
<?xml version="1.0"?>
<!DOCTYPE service_bundle SYSTEM '/usr/share/lib/xml/dtd/service_bundle.dtd.1'>
<!-- $Id: oracle-database-css.xml,v 1.4 2006/03/19 21:19:40 joomul Exp $
The contents of this file are subject to the terms of the
Common Development and Distribution License, Version 1.0 only
(the "License"). You may not use this file except in compliance
with the License.
You can obtain a copy of the license at
http://www.opensource.org/licenses/cddl1.php
See the License for the specific language governing permissions and
limitations under the License.
Copyright 2005, 2006 Joost Mulders.
This document contains a service definition for the
Cluster Synchronization Services (CSS) process.
This process is required for ASM and RAC. It should be started via smf(5)
only for *non-RAC* systems. On RA clusters, this daemon is started via crs.
-->
<service_bundle type='manifest' name='oracle-database-css'>
<service
name='application/oracle/css'
type='service'
version='1'>
<create_default_instance enabled='false' />
<!-- CSS depends on multi-user. That takes care of details like filesystem -->
<dependency
name='multi-user'
grouping='require_all'
restart_on='error'
type='service'>
<service_fmri
value='svc:/milestone/multi-user:default' />
</dependency>
<exec_method
type='method'
name='start'
exec='$ORACLE_HOME/bin/ocssd'
timeout_seconds='30' >
<method_context>
<method_credential
user='oracle'
group='dba'
supp_groups=':default'
privileges=':default'
limit_privileges=':default' />
<method_environment>
<envvar name='ORACLE_HOME' value='/u01/app/oracle/product/10.2.0.1/asm_1' />
</method_environment>
</method_context>
</exec_method>
<exec_method
type='method'
name='stop'
exec=':kill'
timeout_seconds='60' >
<method_context>
<method_credential
user='oracle'
group='dba'
supp_groups=':default'
privileges=':default'
limit_privileges=':default' />
<method_environment>
<envvar name='ORACLE_HOME' value='/u01/app/oracle/product/10.2.0.1/asm_1' />
</method_environment>
</method_context>
</exec_method>
<!-- ocssd.bin does not detach -->
<property_group name='startd' type='framework'>
<propval name='duration' type='astring' value='child' />
<propval name='modify_authorization' type='astring'
value='solaris.smf.manage.oracle.database' />
</property_group>
<property_group name='general' type='framework'>
<propval name='modify_authorization' type='astring'
value='solaris.smf.manage.oracle.database' />
<propval name='action_authorization' type='astring'
value='solaris.smf.manage.oracle.database' />
</property_group>
<stability value='Unstable' />
<template>
<common_name>
<loctext xml:lang='C'>
Oracle Cluster Synchronization Services (CSS)
</loctext>
</common_name>
<documentation>
<doc_link
name='Intro to Oracle Clusterware and Oracle Real Application Clusters'
uri='http://download-east.oracle.com/docs'/>
</documentation>
</template>
</service>
</service_bundle>Edited by: sachinonnet on Jan 12, 2010 2:01 AMHi,
i got the solution as below
removed below line from service xml
<create_default_instance enabled='false' />
created another xml file for instance xml, where i specified the name of instance.
<?xml version="1.0"?>
<!DOCTYPE service_bundle SYSTEM '/usr/share/lib/xml/dtd/service_bundle.dtd.1'>
<!-- $Id: oracle-database-instance.xml,v 1.12 2006/03/12 19:51:20 joost Exp $
The contents of this file are subject to the terms of the
Common Development and Distribution License, Version 1.0 only
(the "License"). You may not use this file except in compliance
with the License.
You can obtain a copy of the license at
http://www.opensource.org/licenses/cddl1.php
See the License for the specific language governing permissions and
limitations under the License.
Copyright 2005,2006 Joost Mulders.
This document contains a service definition for an Oracle database instance.
It contains some instance specific variables like ORACLE_SID and ORACLE_HOME.
These must be filled in below.
Other -generic database- service properties are inherited from the parent
service, 'application/oracle/database'.
A database instance can be brought under SMF control by:
* running /lib/svc/method/ora-smf autoimport
*OR*
* filling in the blanks (marked with '' or ':default') below
* svccfg import <file>
-->
<service_bundle type='manifest' name='oracle-database-instance'>
<service
name='application/oracle/database'
type='service'
version='1'>
<dependency name='oracle-asm' grouping='require_all' restart_on='none' type='service'>
<service_fmri value='svc:/application/oracle/database:ASM' />
</dependency>
<!-- The SMF instance name MUST match the database instance -->
<instance name='PDB' enabled='false'>
<method_context
working_directory='/u01/app/oracle/product/10.2.0.1/db'
project=':default'
resource_pool=':default'>
<!--
The credentials of the user with which the method is executed.
-->
<method_credential
user='oracle'
group='dba'
supp_groups=':default'
privileges=':default'
limit_privileges=':default'/>
<method_environment>
<envvar name='ORACLE_SID' value='pdb' />
<envvar name='ORACLE_HOME' value='/u01/app/oracle/product/10.2.0.1/db' />
</method_environment>
</method_context>
<!--
A generic options property group for this database.
This property group has currently only one variable: instance_type.
instance_type describes the type of database instance. It's value can be
RDBMS or ASM. RDBMS denotes a classic database instance and ASM is a storage
manager instance.
-->
<property_group name='options' type='application'>
<stability value='External' />
<propval name='instance_type' type='astring' value='RDBMS' />
<propval name='modify_authorization' type='astring'
value='solaris.smf.manage.oracle.database' />
</property_group>
</instance>
</service>
</service_bundle> -
Infiniband configuration for Oracle VM in Sparc T5-2
hello all,
Just wanted to post here to ask if someone has experience on configuring Infiniband interfaces in a SPARC T5-2 Server with multiple Oracle VMs in it
As far as we have checked, you can't have Virtual Switch(Simple way) using an Infiniband Interface and neither use DIO to assign individual PCI device to a Virtual Domain, only leaving us with the option of SR-IOV which requires several things(We are good with all of them but Switch F/W version) but it disables the possibility of Live Migration--something that we definitely don't want
Any help is appreciated
Thanks in advance and RegardsHi, just a note that with SR-IOV you can (with current logical domains manager) remove the SR-IOV device while the domain is running, so there is a way to accomplish live migration. See the August 20, 2013 blog entry at https://blogs.oracle.com/raghuram/
I hope that helps, Jeff -
Hi All,
Please teach about user management in Oracle Service Registry(OSR).
We want to manage all users in LDAP(OID).
Questions
Q1) How can we manage the user in OID?
Q2) OSR default user(admin) will not be displayed on the security realm in WebLogic.
Can we configure security realm in WebLogic?
Regards & Thanks
yoshida.Refer to this doc http://download.oracle.com/otndocs/tech/soa/OSR103ProductDocumention.pdf
Section 6. External Accounts Integration -
Project Analytics - PA - Configurations for Oracle Apps 7.9.6
Guys - I have gone through the docs and cannot find what configuration steps are necessary for us to run OBAW / DAC loads for PA (Project Accounting / Project Analytics).
Any pointers are greatly appreciated.
Regards,Here are the main steps:
Install OBIEE
Install OBIA (e.g. 7.9.6) use Project analytics option while install
Create Target Database ( e.g. 10.2.x or 11g)
Install Informatica (e.g. 8.6, SP4)
Client
Server (Server / Repository)
Integration Service and Repository Service
Install DAC (e.g. 10g)
Install DAC client
Install DAC Server
Restore Informatica Repository
Restore DAC Repository
Register Informatica Repository services with DAC
Connect DAC to DW
Create Custom Container in Informatica for ETL loads -
How to choose a right server for Oracle Database!
Hi all,
Is there any formular that allows me to find the appropriate server configuration for Oracle database 11g?
Please help!
Thank you all.
Dan.
Edited by: Dan on 01:45 06-01-2013Simply put ... no.
Determining the correct server is a dance between hardware vendors (one point of input to be treated with general distrust), internal expertise and experience working with similar systems, and most importantly understanding the behaviour of what you are building.
Here are some sample questions to start the ball rolling.
1. What operating system expertise does your organization have?
2. What operating system expertise is readily available in the community from which you hire applicants?
3. What type of application?
4. What are up-time expectations?
5. Requirements for high availability?
6. Requirements for time to perform a full recovery?
7. Requirements for security?
8. Storage footprint (dictates internal storage versus SAN, NAS, or ZFS)
9. Anticipated growth (3-7 years)
Everyone wants to sell you CPU clock-ticks, more RAM, more IOPS, etc. But the first thing you need to understand is the capabilities you require that are generic: Required of any solution. Only when you have a clear understanding of these factors are you ready to discuss whether the solution is a pizza box or an ODA ... an Exadata or an IBM System Z.
Far too often I find people purchasing RAM they don't need with CPU speeds that exceed the ability of their network infrastructure to move the data so pay special attention when you are ready to make your purchase to engineered systems like the ODA. -
Database is configured for Data Guard
I am run a UTF8 conversion on a development database that has been cloned from Data Guard. There is a warning in Migration Status: "Database is configured for Data Guard" What is the DMU looking at to determine this? The database is open in read-write mode and it behaving like a primary database (I run the DMU scan and run updates to fix invalid representations). I would like to know what settings I need to update.
Is this preventing me from converting tables using CTAS? When I try to select this for all tables I get the message, "The DMU does not support the conversion method "Copy data using CREATE TABLE AS SELECT" for tables that are involved in an Oracle Streams process, like capture or apply. Use another available conversion method for the table"
Thanks,
BenThe DMU checks if the parameter DG_BROKER_START is set to true.
The problem with CTAS is independent from Data Guard. The DMU checks for tables that:
- are source of asynchronous Streams capture, or
- have update conflict handlers, or
- have DML handlers, or
- have conflict resolution parameters
The above tables are considered configured for Oracle Streams and are not supported by CTAS conversion method. This is because the CTAS method creates a converted copy of the table and drops the original. The DMU is not capable of moving the Streams configuration information from the old table to the new one.
Thanks,
Sergiusz
Maybe you are looking for
-
I have tried changing the permissions for my hard drive/Account and all files below it but this prevented my Mac from starting; hence, I keep reinstalling the OSX (this is why I am currently on 10.6.4 instead of 10.6.6). Additionally, even though I k
-
How to map XML to Web Dynpro context nodes?
Hi All, Could anyone tell how xml string can be bound to context nodes ? In my requirement i need to serialize context nodes value to string and deserialize it back to nodes for implementing back naviagtion between views. I didnt see much threads ach
-
Computer freezes after Post (Cannot load/re-install windows)
Hi! I have the K8T Neo-FIS2R motherboard 1.7 bios with an AMD Athlon 64 3000+ The computer loads up correctly, sees all of the memory, both CD rom drives, and both hard drives. However, after the post my computer goes to the Load win XP in safe mod
-
Clarification of background processing and BAPI_DOCUMENT_CREATE2
Hello, i am sorry to mention this long discussed topic, but i would very appreciate to clarify how can i checkin new originals for a new document using background processing. we are trying to use BAPI_DOCUMENT_CREATE2 to create a document and checkin
-
Double replacement using repalceAll methot of Matcher
Hi all, I'm using the java.util.regex package in my program. I have noticed that this code Pattern p = Pattern.compile(".*"); Matcher m = p.matcher ("anystring"); String s = m.replaceAll ("otherstring"); it like produce a wrong result, the string s g