SQLPATH setup for default scripts directory

Anyone know of a way to setup a sqlpath directory for the XE sqlplus client. I updated the registry entry for sqlpath which my 9i client now uses, but can't find a similar sqlpath registry entry for the XE client/home. I'm mostly trying to use my login.sql as well as having a central place for storing scripts, and would not mind having a separate path for my two homes if there was a conflict. Any help is appreciated.
-Bob

I agree with setting
SQLPATH
using control panel -> system -> advanced -> environment variables -> user variables
just set SQLPATH to the fully qualified path and no matter where you start sqlplus from - it'll see the scripts in there.
less scary than the registry, less limiting than starting sqlplus in a fixed directory.

Similar Messages

Can't change default installation directory for silent installation of Flash Builder 4.5

Hello,
I'm trying to create a custom installation script for Flash Builder 4.5 in silent mode.
I have created a flash builder msi installer using "Adobe Application Manager Enterprise Edition".
I would like to change the default installation directory during silent installation.
Could you please help ?
Thank you in advance.
Best regards,
Ryad

The install.xml in the "Adobe Flash Builder 4.5 Installer/deploy" folder will have the INSTALLDIR property. You can change this property to your custom location.
<?xml version="1.0" encoding="UTF-8"?>
<Deployment>
<Properties>

<Property name="INSTALLDIR">C:\Program Files\Adobe</Property>
</Properties>
<Payloads>
</Payloads>
</Deployment>
Thanks
Unni G S

How to setup a default value when defining (prompting) for a value?

When I prompt the user in a SQL statement then I can declare a default value like in:
SELECT *
FROM all_users
WHERE username = nvl('&myvariable','SYSTEM');
But when I define a variable this does not work:
define tablename=nvl('&tablename','test123')
How can I setup a default value here?
Peter

Is there a way to define a default value DIRECTLY in SQLplus DEFINE command (and not later when the value is used in SQL statement)?no, there is not for DEFINE but you can use ACCEPT:
SQL> accept tablename prompt 'Enter value for table Name:' default EMP
Enter value for table Name:
SQL> select column_name
2 from cols
3 where table_name='&tablename';
OrderNumber=1234
COLUMN_NAME
EMPNO
ENAME
JOB
MGR
HIREDATE
SAL
COMM
DEPTNO
8 rows selected.Max
[My Italian Oracle blog| http://oracleitalia.wordpress.com/2010/02/07/aggiornare-una-tabella-con-listruzione-merge/]

How to setup a default direction for new divs in fluid grid layout in dreamweaver?

Hi,
how to setup a default direction for new divs in fluid grid layout in dreamweaver? I am an RTL interface user, I need my new divs to be inserted from right to left not Left to Right! could it be in dreamweaver?
Thanks.

This may get me into strife, but my experience is that you are better off finding another platform for your RWD.
The framework that I tend to use is by Zub-Foundation http://foundation.zurb.com/.
A commercial product that I have come to appreciate can be found here http://www.projectseven.com/products/tools/composer/index.htm. Please do not mention me if you happen to choose this product.

How to setup a default size for new divs in fluid grid layout in dreamweaver?

Hi,
how to setup a default size for a new divs in fluid grid layout in dreamweaver? I don't need the default size for new divs as a 100% width, I need them 13.69% as a one coulmn width only (7 coulmns fluid grids layout for desktop size 1000w).
This problem I've faced when I intended to insert dozens of fluid grid divs in the layout.

Sorry, I don't believe that you have had a good look at the Foundation framework. I'll now hold your hand while we go through the basics.
Here is the specific page http://foundation.zurb.com/docs/components/grid.html
The default values are
Em-base : 16px
Row width: 62.5em (62.5em x 16px = 1000px)
Columns per row: 12
These and other default values can be changed. The fact of the matter is that if you stipulate a section width of 2 or 3 or 12 columns, the widths will automatically be calculated for you.
In your case, if you want 7 columns, all you need to do is change the number of columns per row and the rest is done for you.

Oracle 10g Express Edition - change default working directory for save ?

Greetings all,
I'm completely new to Oracle but I am quite sure that on Oracle 9i, when using the <save xyz.sql> statement, a file was saved somewhere on the hard drive.
I accidentaly managed to convince XE to save .sql files on C:\ but I would like to change that ...
Google refused to offer me a solution so I'm asking you guys for advice.
And no, <save desired_path\filename.sql> is not an option :P, I would like to make the change permanent.
Thank you in advance,

Hi,
If you are using Windows, you can edit your "SQLPlus 80" shortcut.
Changing the "start in" path to, e.g. "c:\sql" will do the trick. SQL+ commands such as "save" and "get" will now use "c:\sql" as default working directory.

Default Native directory password for accessing openldap data

hi everyone ,
i was trying to read openldap data from hyperion shared services . i know i can change the password in change native directory password for the root and i can read all the Ldap data.
I was wondering if there is any default password for root in Shared services , since company is not allowing me to access change the password so i wish to know what is the default Native Directory password for LDAP stored in Hyperion Shared services for Root.

try username: admin password: password; its a default user and password for hyperion products.
regards,
LYN

Setups for Directory where data files sit, in Inbound Transaction.

Hi,
My customer is implementing Inbound Po transaction using e-commerce gateway for Order Import in R12.
Could you let me know what setups i need to ask DBA's for creating inbound directory.
I just found one required setup online.
1) DBA's must define the UTL_FILE_DIR parameter in the INIT.ORA file.
Thanks.

I can see why no consensus was reached. I've now looked at that link, where some recommend a place in /usr, but the FSH info that I found says:
/usr is the second major section of the filesystem. /usr is shareable, read-only data
So that doesn't seem right.
Others recommend /var, but the FSH info says:
/var contains variable data files. This includes spool directories and files, administrative and logging data, and transient and temporary files.
Nope, not there either.
Final suggestion there is /home. The files don't need to belong to a particular user, as set forth previously, and the FHS helps with
/home is a fairly standard concept, but it is clearly a site-specific filesystem. The setup will differ from host to host. Therefore, no program should rely on this location.
For an OS that serves gazillions of files to as many users, it just strikes me as odd that there isn't a standard here. That being said, individuality is often a good thing.
Thank you for your suggestions, both of which make a lot of sense. I am leaning toward /home/share.

Default Username and password for CCM DC-Directory Admin

What is the default username and password for accessing dc directory for callmanager ?
TIA

Hi Zufi,
It should be;
Log in as Directory Manager. The password by default is ciscocisco.
Hope this helps!
Rob
Please remember to rate helpful posts........

[svn:osmf:] 13121: Moving the setup for the default control bar into a DefaultControlBar class .

Revision: 13121
Revision: 13121
Author:   [email protected]
Date:     2009-12-21 11:53:07 -0800 (Mon, 21 Dec 2009)
Log Message:
Moving the setup for the default control bar into a DefaultControlBar class. Adding constants for the widget names, and updating WebPlayer accordingly.
Modified Paths:
    osmf/trunk/apps/samples/framework/WebPlayer/src/WebPlayer.as
    osmf/trunk/libs/ChromeLibrary/.flexLibProperties
    osmf/trunk/libs/ChromeLibrary/src/org/osmf/chrome/controlbar/ControlBar.as
Added Paths:
    osmf/trunk/libs/ChromeLibrary/src/org/osmf/chrome/controlbar/DefaultControlBar.as

Revision: 13121
Revision: 13121
Author:   [email protected]
Date:     2009-12-21 11:53:07 -0800 (Mon, 21 Dec 2009)
Log Message:
Moving the setup for the default control bar into a DefaultControlBar class. Adding constants for the widget names, and updating WebPlayer accordingly.
Modified Paths:
    osmf/trunk/apps/samples/framework/WebPlayer/src/WebPlayer.as
    osmf/trunk/libs/ChromeLibrary/.flexLibProperties
    osmf/trunk/libs/ChromeLibrary/src/org/osmf/chrome/controlbar/ControlBar.as
Added Paths:
    osmf/trunk/libs/ChromeLibrary/src/org/osmf/chrome/controlbar/DefaultControlBar.as

Information about the default setup for the demo user

Hi,
Can anyone guide me the properties which we have to set for the below
# Information about the default setup for the demo user.
db.adminUser=system
db.demoUser=FOD
db.demoUser.password=fusion
db.demoUser.tablespace=USERS
db.demoUser.tempTablespace=TEMP
And what exactly they represent
Regards,
Krishna

Krishna,
It's pretty obvious...
db.adminUser = the username of a dba user in your database
db.demoUser = the username of the demo user that will get created
db.demoUser.password = the password that will be used for the demo user
db.demoUser.tablespace = the default tablespace for the demo user
db.demoUser.tempTablespace = the default temporary tablespace for the demo user
You don't have to change any of them.
John

How can I change the default page setup for printing messages in Apple Mac Version 4.6 (1085)

How can I change the default page setup for printing messages in Apple Mac Version 4.6 (1085)

As soon as I posted, Ifigured this one out on my own by going into user settings and changing the default there. Then I was able to delete the default @mac account. Thanks!

How can I change the default EXPORT directory for latest iPhoto?

Perhaps I am missing something, but I have as yet to find a way to set my default EXPORT directory. Since installing Lion and the iPhoto update, whenever I want to export it wants to put the image in 'Pictures', but I want 'Desktop' generally or somewhere else.
I am all set with library and import location. In fact, Import is smart enough to remember where I import my stuff FROM - namely, the desktop.
But once I have edited files and want to export them, the default jumps back to Pictures.
Again, this is NEW and CHANGED behavior with the latest release to coincide with iOS 5 ...
I just want it to remember my default from export to export ... heck, it even changes within the same session!

I can certainly confirm the behaviour and have no solution to it.
That said, in the export dialogue typing command-d will point the export to the desktop.
Regards
TD

AP Check printing setups for printing checks on your own

HI
I am wondering if there a good document which deals with AP check printing with MICR and signature on your own check stock
thanks

Recently we started to deal with AP check printing in our organizatin. It was a daunting task with the information and resources scattered all over and missing critical pieces of information to make sense out of the whole process flow. We attempted to go through the AP check printing internally and succeded.
I decided to post the information for the benefit of people about the our experience
Check Printing Basics and Beyond for Printing Checks on Your Own
by
Sarma Chilukuri
This article deals with what is needed to get your own checks printed. It is a first attempt to uncover all the hidden rules that one should be aware to get your own checks printed. The first section deals with the basic AP check printing setup, while the 2nd half explores some of the flow of events that make it possible to print the check.
Part I â Basic Setup
AP Setup for check printing
There are multiple steps in the AP check printing. First set of steps deal with the AP side setups. The second step is to get the System side setups. The system side setup deals with printer setup and program options setups. The last step would be to make the print format files configured with the vendor provided escape sequences in the laser print format file.
Step 1: login as Payable Manager
Step 2: Bank Setup: Navigate to Setup: Payments > Banks
1.     Make sure the Bank # etc are present
2.     Tab to âBank Accountsâ, and make sure your account # has been setup
3.     On the Bank Accounts screen, tab to the âPayables Documentsâ and verify that Payment format (E.g., COK Laser Format) has been entered. This âPayment format links to next section where we associate it to the right payment program.
Fig 1. AP Payment Bank Setup Screen
Step 3: Program Setup (Setup: Payments > Programs)
As we know there are only 5 formats 3 of which are âEver Green Laserâ (APXPBFE G|L|F) which are explained in the AP Users Guide. For your own form printing, you have to associate the format to APXPFEL (laser format) program. Also, the APXPBFEL or APXPBFEF call the APXPBFEG, which is the base program that pulls the data from oracle base tables. APXPBFEL is the one which allows us to print the checks with MICR and signature on a plain paper not on a pre printed stationery.
Fig. 2 AP Payment Format Setup Screen
Printer Styles, Drivers setup
The above process summarizes the AP Setup. As a DBA, the printer setup needs to be validated. The base install provides the right setup to some extent. But the differences in printers and print queues may add some complexity to the final configuration. The following section discusses the set up the base install provides and changes as needed.
Step 1. Login as system Administrator
Step 2: Style (Install : Printer > Style)
Look for the âPORTRAITHPLJ4LASCHECKâ. This one is associated with the SRW Driver Called, âAPLASPâ (AP Laser printer format).
Step 3: Driver (Install : Printer > Driver).
     1. The âPORTRAITHPLJ4LASCHECKâ is associated with a âUser Driverâ of PORTRAIT for HPLJ4 and and a SRW driver of âAPLASPâ
     2. Also notice that there is an Initialization string at the bottom of it. This initialization string gets called as pre-report trigger for the APXPBFEG program (APXPBFEG.rdf) file. It sets the kind of format it should be. Please see the Appendix A for details on these printer pcl code translations. The Initialization string was as follows:
Initialization: /eE/e&l0o2a7C/e(s0P/e(8U
Step 4: Printer type (Install : Printer > Register)
Each printer type is associated with a set of styles. Make sure the printer that was selected has the above style and its associated driver listed against that.
Fig. 3 System Administrator Printer Seups
Step 5: Program Setup (Concurrent > Program > Define)
This step holds the key for check printing. It is necessary to define whether you need the check on top followed by the Stub or the other way around. The way it is controlled is based on the APXPBFEG.rdf, the report definition file and the APLASP.prt (Printer Style associate with the Portrait laser check format SRW driver). The APLASP.prt file ($FND_TOP/reports) has two identical setups called the 100 series and the 200 series. Those identical sets of setups define where the MICR and signature print on the check. The following table lists the some of the codes in the 100 series. Please refer to Doc ID #146452.1 for complete details.
Fig. 4 System Administrator Concurrent Program Definitions
CODE #     Code Definition
100     Electronic check activation string
101     1st Check #
102     2nd Check #
104     Deactivate check number mode string
111     Activate MICR line
112     MICR Deactivation / reset the printer head position
121     1st Signature
122     2nd Signature
141     Address font activation string
199     Return to default state string
Table 1. APLASP.prt -- MICR Activation Codes
The above code block repeats itself the same way in the 200 series. The decision to activate one way or the other controls the Check printing.
Step 2: Setting up the Option block
In the concurrent program definition for the APXPBFEL, there is an Options block in the middle. You need to list the codes that you want to activate. Please refer to Doc ID # 186640.1 for some explanation on these.
E.g.,
p_printer_code_mask="201,211,221,241" p_sig2_amount="" p_sig3_amount="" p_sig1_vendnum="" p_sig2_vendnum="" p_sig3_vendnum="" p_country_to_ignore="US" p_continuous_stationery="N"
Step 3: Output format is Text
Text format is sufficient, as the printer will pick up these escape sequences anyway.
Fig. 5 System Administrator Concurrent Program APXPBFEL Options Definition
UIPRINT.TXT, UIFONTS.ALI
One needs to be aware of a few more pieces in this puzzle. The UIPRINT.TXT identifies to the Oracle Applications the print queues that were setup. This file is needed to set your PCL / Post Script printer definitions. I did not have to really tinker with these files other than identifying the PCL and Post Script Qâs that were setup on the UNIX box.
Part II: Integrating all the pieces
The above setups are all documented in various articles. We need to understand a few more steps to see how all these pieces come together.
What you need to know about APXPBFEG.rdf
APXPBFEG (.rdf) is the report file which when called pulls the data from Oracle. If you open the APXPBFEG.rdf in the Oracle reports, there is initialization to the report called, SRW.Init. This will bring in the initialization string associated with the PORTRAITHPLJ4LASCHECK driver definition file. Also, please be very careful with this report format file. When you open it, there is small tiny empty block. in the first block which calls the printer initialization code 100/200 under the Format Mask (from APLASP.prt). If this portion gets changed or messed up, one can end up with some unexpected results. Each of those blocks like MICR, CHECK etcâ¦ have associated format triggers and printer codes.
Please make sure that the printer mask is properly handled. I noticed that the 200 series MICR (211) and Signature (221) printer masks were tied to 111 and 121 respectively. These should have been 211 and 221. The other place you need to be careful was the printer code before and after is proper.
For E.g.,
For the MICR, the âprinter code before and after columns â should be 111 and 112 (or 211 / 212) respectively while Format Trigger should reference to 111 (211).
Fig. 6 APXPBFEG rdf file printer mask and Format Triggers
The escape sequences in the APLASP.prt file for these codes will play the crucial role in getting our format around the report output that gets generated from the APXPBFEG program. Please refer to the explanation of these escape sequence codes in the APPENDIX A.
At this point when you run the program, you will see that the formatted output report file will have all the initialization strings and the output associated with that. You can compare the fields and verify the results. Let us closely examine the parts of the 111 and 121 where the micr and signature prints. The key to this to code the escape sequences the right way to get the associate MICR and signature print out correctly.
Fig. 7 APXPBFEG rdf file MICR printer mask and Format Triggers
Code 111 and Code 112 from the APLASP.prt file.
I broke the line into pieces to illustrate the exact escape sequence code.
Code "211"
Part 1: esc "&f0S" esc "&f0y0X" esc "&l0E" esc "&a0L"
Part 2: esc "(8M" esc "(s0p8.00h8.0v0s0b80T" --- This will be provided by the ROM
Cartridge provider
Part 3: esc "&k15H" esc "*p3215Y" esc "&a13.8C"
code "212"
Part 1 : esc "&f1x3x8X"
Part 2 : esc "&f1S"
Let us go over these 2 sets of codes carefully.
Escape Code     Meaning     Comment
esc "&f0S"      Push Cursor Position
esc "&f0y0X"     Define Macro ID 0 and Start Macro Definition
esc "&l0E"      Define Top Margin at 0 Lines
esc "&a0L"      Define Left Margin at Column 0
esc "(8M"     8M Symbol SetNote : As per pcl codes this happens to be Font Primary JIS Math 8 symbol     MICR Part 1 : Provided by the Vendor from where you the ROM cartridge
esc "(s0p8.00h8.40s0b0T"     {Fixed Pitch}{pitch 8.00 cpi}{Font Style 8.40}{Medium Weight}{Typeface 0}     MICR Part 2 : Provided by the Vendor
esc "&k15H" esc "*p907Y"     Set HMI = 15/120" Vert position = 907 Dots
esc "&a13.8C"     Move to Column 13.8
     CODE 112
esc "&f1x3x8X"     {End Macro Definition}{Call Macro}{Delete Macro ID}
esc "&f1S"     {Pop Cursor Position}     At this point, the MICR gets printed
Table 2. Escape Sequences in APLAP.prt file Explanation
Fig. 8 APXPBFEG rdf file Signature printer mask and Format Triggers
The signature piece (221) has also similar meaning.
Escape Code     Meaning     Comment
esc "&f0S"     Push Cursor Position
esc "*t300R"     300 DPI Graphics resolution
esc "*p1500X"     Horiz position = 1500 Dots
esc "*p650Y"     Vert position = 470 Dots
esc "(4B" esc "(s1p53v0s0b102T"esc "&f0S!"     Symbol SetProportionalPoint Size 53UprightMedium WeightTypeface 102Push Cursor Position!     Vendor gave the us esc "(4B"esc"(s1p53v0s0b102T!"Note: the ! when the it pushes the ! and that is where it prints the signature piece. The first part forms the symbol set , say (4B and the later part forms the signature font and ! is the piece. I took the ! from the above and let it stay with the 3rd part of it so that signature does not print twice.
esc "&f1S"      Pop Cursor Position
esc "*p+121Y"     Move down 121 Dots
esc "&f1S"     Pop Cursor Position
Table 3. Escape Sequences for Signature in APLAP.prt file and Explanation
Summary
One can print their own checks using the above steps. This can work as a cost effective solution for small organizations where the budgetary constraints are tighter. We are successful in getting the AP Checks printed using the above method.
References
Metalink Doc ID # 186640.1, Different Payment Formats â¦
Metalink Doc ID # 60936.1, Step by Step Guide to Setup a Printer in Oracle Applications
Metalink Doc ID # 250543.1, How to Create An Initialization String for a Payable Check Format
Metalink Doc ID # 48680.1, Accounts Payable FAQ â Payment Batch, Check
Metalink Doc ID # 1074792.6, Exclamation Point (!) Prints On Check When Using APXPBFEL And Cartridge
Metalink Doc ID # 158486.1, APXPBFEL Evergreen (Long Laser)
Metalink Doc ID # 146452.1, Listing of p_printer_code_mask Default Values for APXPBFEL
Chapter 2, Oracle Payables user guide
Appendix A
APLASP.prt printer codes explanation
code "200" esc "&l0o2a6d66p8.000c2e1x0l63f1H" esc "&k12.00H" esc "(8U"
esc "(s0p10.00h12.00v0s0b3T" esc "&k11.75H" esc "&a1l0R" control(M) esc"&f3005y4X"
{Portrait}
{Letter}
{6 LPI}
{Define Page Length to 66 Lines}
{Set VMI = 8.000/48"}
{Define Top Margin at 2 Lines}
{Select 1 Copies}
{Disable Perf Skip}
{Define Text Length as 63 Lines}
{Feed from Tray 1 (upper)}
0.1 esc "&k12.00H"
{Set HMI = 12.00/120"}
0.2 esc "(8U"
{Roman-8 Symbol Set}
0.3 esc "(s0p10.00h12.00v0s0b3T"
{Fixed Pitch}
{pitch 10.00 cpi}
{Point Size 12.00}
{Upright}
{Medium Weight}
{Typeface 3}
0.4 esc "&k11.75H"
{Set HMI = 11.75/120"}
0.5 esc "&a1l0R"
{Define Left Margin at Column 1}
{Move to Row 0}
control(M)
0.6 esc"&f3005y4X"
{Define Macro ID 3005}
{Enable Overlay}
code "201" esc "&f0S" esc "&a1.25r70C" esc "(8U" esc "(s1p14v0s3b4148T"
{Push Cursor Position} esc "&f0S"
1.1 esc "&a1.25r70C"
{Move to Row 1.25}
{Move to Column 70}
1.2 esc "(8U"
{Roman-8 Symbol Set}
1.3 esc "(s1p14v0s3b4148T"
{Proportional}
{Point Size 14}
{Upright}
{Bold}
{Typeface 4148}
code "202" esc "&f0S" esc "&a20.25r70C" esc "(8U" esc "(s1p14v0s3b4148T"
{Push Cursor Position}
2.1 esc "&a20.25r70C"
{Move to Row 20.25}
{Move to Column 70}
2.2 esc "(8U"
{Roman-8 Symbol Set}
2.3 esc "(s1p14v0s3b4148T"
{Proportional}
{Point Size 14}
{Upright}
{Bold}
{Typeface 4148}
code "211" esc "&f0S" esc "&f0y0X" esc "&l0E" esc "&a0L"
esc "(0Q" esc "(s0p8.00h8.40s0b0T" esc "&k15H" esc "*p907Y" esc "&a13.8C"
{Push Cursor Position}
11.1 esc "&f0y0X"
{Define Macro ID 0}
{Start Macro Definition}
11.2 esc "&l0E"
{Define Top Margin at 0 Lines}
11.3 esc "&a0L"
{Define Left Margin at Column 0}
11.4 esc "(0Q"
{0Q Symbol Set}
11.5 esc "(s0p8.00h8.40s0b0T"
{Fixed Pitch}
{pitch 8.00 cpi}
{Font Style 8.40}
{Medium Weight}
{Typeface 0}
11.6 esc "&k15H" esc "*p907Y"
{Set HMI = 15/120"}
{Vert position = 907 Dots}
11.7 esc "&a13.8C"
{Move to Column 13.8}
code "212" esc "&f1x3x8X" esc "&f1S"
{End Macro Definition}
{Call Macro}
{Delete Macro ID}
12.1 esc "&f1S"
{Pop Cursor Position}
code "221" esc "&f0S" esc "*t300R" esc "*p1500X" esc "*p470Y"
esc "(30C" esc "(4B" esc "(s1p53v0s0b102T!"
esc "&f0S!" esc "&f1S" esc "*p+121Y" esc "&f1S"
esc "&f0S"
{Push Cursor Position}
21.1 esc "*t300R"
{300 DPI Graphics resolution}
21.2 esc "*p1500X"
{Horiz position = 1500 Dots}
21.3 esc "*p470Y"
{Vert position = 470 Dots}
21.4 esc "(30C"
{30C Symbol Set}
21.5 esc "(4B"
{4B Symbol Set}
21.6 esc "(s1p53v0s0b102T!"
{Proportional}
{Point Size 53}
{Upright}
{Medium Weight}
{Typeface 102}
21.7 esc "&f0S!"
{Push Cursor Position}
21.8 esc "&f1S"
{Pop Cursor Position}
21.9 esc "*p+141Y"
{Move down 121 Dots}
21.10 esc "&f1S"
{Pop Cursor Position}
code "222" esc "&f0S" esc "*t300R" esc "*p1500X" esc "*p650Y"
esc "(30A" esc "(s0p.426h35.25v0s0b128T" esc "&f0S!"
esc "&f1S" esc "*p+141Y" esc "&f1S"
{Push Cursor Position}
22.1 esc "*t300R"
{300 DPI Graphics resolution}
22.2 esc "*p1500X"
{Horiz position = 1500 Dots}
22.3 esc "*p650Y"
{Vert position = 650 Dots}
22.4 esc "(30A
{30A Symbol Set}
22.5 esc "(s0p.426h35.25v0s0b128T"
{Fixed Pitch}
{pitch .426 cpi}
{Point Size 35.25}
{Upright}
{Medium Weight}
{Typeface 128}
22.6 esc "&f0S!"
{Push Cursor Position}
22.7 esc "&f1S"
{Pop Cursor Position}
22.8 esc "*p+141Y"
{Move down 141 Dots}
22.9 esc "&f1S"
{Pop Cursor Position}
code "241" esc "&a-100V" esc "&l5.8C" esc "(8U" esc "(s0p12.00h10.00v0s3b3T" esc "&k11.75H"
41.0 esc "&a-100V"
{Move up 100 Decipoints}
41.1 esc "&l5.8C"
{Set VMI = 5.8/48"}
41.2 esc "(8U"
{Roman-8 Symbol Set}
41.3 esc "(s0p12.00h10.00v0s3b3T"
{Fixed Pitch}
{pitch 12.00 cpi}
{Point Size 10.00}
{Upright}
{Bold}
{Typeface 3}
41.4 esc "&k11.75H"
{Set HMI = 11.75/120"}
code "299" esc "(8U" esc "(s0p10.00h12.00v0s0b3T" esc "&k11.75H" esc "&l6D"
{Roman-8 Symbol Set}
99.1 esc "(s0p10.00h12.00v0s0b3T"
{Fixed Pitch}
{pitch 10.00 cpi}
{Point Size 12.00}
{Upright}
{Medium Weight}
{Typeface 3}
99.2 esc "&k11.75H"
{Set HMI = 11.75/120"}
99.3 esc "&l6D"
{6 LPI}

How to set default working directory in iSQL*PLUS

In regular SQL*Plus, one could set the properties attribute of the shortcut icon to a default working directory. Is there a way to set a default for iSQL so that you don't have to reset this each time you log on?

The default path for the "Browse..." (Netscape) or
"Choose" (Opera 6) button for loading scripts????
This would be browser specific - even the button text
is chosen by the browser. I've never tried to rig the
initial path. Maybe it can be done with a shortcut
to the browser executable?
-- CJ

SQLPATH setup for default scripts directory

Similar Messages

Maybe you are looking for