SQLPlus and SQLLoader needed for Sparc Solaris 2.6

Hello,
for a test i need the two Oracle utilities SQLPlus and SQLLoader
for Sparc Solaris 2.6.
Is there a test version available ???
Thanks for information.
Olaf.
null

hai Alan,
Let me specific on the problem.
I developed a fail-over software for Linux servers(need 2 servers of same configuration). In this servers ,there are two modes , Active and passive mode. At a time one can be active,and other passive. Clients can communicate the with the servers through a common alias ip address. But the actual ip address of servers can be different.Normally Active server would be having the alias ip.
When switching take place from active to passive mode,server will be assigned with its actual ip address. When switching takes place other passive server becomes active and its get common alias ip address.?
This is the actual scenario . And fake is used in Linux to refresh the arp table of immediate switching device.
But i came to know that solaris os would do it normally when it switches .?
Is this possible with solaris.?

Similar Messages

VM Server for SPARC - Solaris OS Licensing

I'm about to buy a new Sun SPARC T4-1 sever. This comes with Solaris 11 and Oracle VM for SPARC. Oracle have advised me that installing Solaris 10 in place of 11 is allowed and supported.
Do I need to purchase an additional Solaris licence for each Solaris virtual machine we want to run on this server? I have tried to look this up on the Oracle website and not found any useful information in this regard.
I want to consolidate different applications and Oracle databases running on a Fire v240 running Solaris 10 and an 280r running Solaris 8 onto the new server. At present I'm undecided as to whether Zones or VM Ldoms are the best way to achieve this. If we use VM for SPARC I would probably want to run two Solaris 10 virtual machines.

Licensing and Support is per system not per VM so you wouldn't incur any extra costs adding extra VMs to an existing system that is compliant but as per https://edelivery.oracle.com/EPD/FAQ/get_form?ARU_LANG=US#e11 you'd need to contact Oracle for a categorical answer to Licensing, etc.
Note: it needn't be a choice between Zones and LDoms - you could use both, with a number of Zones within a domain...
The P2V tool might also be useful: http://docs.oracle.com/cd/E35434_01/html/E23807/ldomsp2v.html#scrolltoc

Announcing availability of x86 hosted cross compiler for SPARC/Solaris

We are pleased to announce the release for GCC For Sun Systems 4.2.0 cross compilers!
This is a Solaris/x86 hosted compiler with target code generation for
SPARC/Solaris systems. If you develop on your OpenSolaris, or Solaris
x86 laptop or desktop, you can now start compiling your sources for
SPARC systems. Almost all features available in the
native SPARC GCC For Sun Systems 4.2.0 compiler are available
for use in the cross compiler. Please refer to the mini cross compiler howto
page for additional details on install and usage, and gotchas in cross
development environment.
Please continue to provide us your feedback and issues, which helps
us make the product better.
Thanks
GCCFSS team

Can GCCFSS also cross compile from in reverse - from SPARC to x86/x64?
Thank you

Proper server sizing for SPARC/Solaris to Intel/R migrations

Is there any collateral available concerning proper server sizing for customers migrating from SPARC/Solaris to Intel/RHEL? I was just asked by our account team that is working with a very large custormer in the pharma space.
My initial knee jerk was to refer them to the OEM but thought I'd look around in these forums first.
My searches have not returned any good results yet.

Hi Mike
the public SAP SD-Benchmark homepage ([http://www.sap.com/benchmark/|http://www.sap.com/benchmark/] -> SD two-tier results) gives interesting but very indirect sizing hints. There are several SAP SD-Benchmarks on SPARC/Solaris. I picked some of them:
[2008075|http://download.sap.com/download.epd?context=B1FEF26EB0CC3466320983FEDBEB2A47615DC8F24866B0B6870E95AA3589B515566F7A57D98961BB]: 24650 SD-User w SAP ERP 6.0 (2005 Non-Unicode) on SPARC Enterprise Server M9000 (32CPUs)
[2008062|http://download.sap.com/download.epd?context=40E2D9D5E00EEF7C974D9FC4D21DA80E794CB437BC196262799B27A2BB01B9D6]: 825 SD-User w SAP ERP 6.0 (2005 Non-Unicode) on SPARC Enterprise Server M3000 (1CPU)
[2008058|http://download.sap.com/download.epd?context=40E2D9D5E00EEF7CB82813BD3F95797BAEB80527B36EC026E03386D659E4DE48]: 7520 SD-User w SAP ERP 6.0 (2005 Non-Unicode) on SPARC Enterprise T5440 (4CPUs)
You'll probably have the hardware setup of your customer together with the system utilization. Check it with the Solaris/SPARC benchmarks on the public page and check for Intel Benchmarks as well. Make sure, that the SAP release is the same (with 2009 a new SAP release is mandatory for benchmarks -> numbers are not comparable to 100%).
Thanks,
Hannes

Recommended file descriptors for Sparc Solaris

I'm moving an app from Linux to Sparc Solaris and the app keeps dying with a
message of:
java.net.SocketException: Too many open files.
How many open files should weblogic have on a process level and on a system
wide level? The sparc box has a standard SunOs 5.6 I.E. Solaris.

make it 1024, solaris' max, will save hassles. 'plimit' and 'ulimit' are the commands used to configure fd.

Discoverer and potential need for IDS

I am reviewing 10g Application Server Enterprise Edition, as I've a need for Oracle Reports and Portal to distribute the reports company wide. In the search I became aware that Discoverer was also included with this bundle. And the features are quite an upgrade to those available with Reports.
So here is the question, I've been informed that in order to utalize Discoverer one also needs the features available within the Internet Developer Suite else Discoverer is not usable.
So I went off to research, just what it is that IDS provides that Discoverer "needs". But thought I would post here and ask the community for a summary of why IDS is needed, while I read the white papers.
Any help would be greatly appreciated.
Adam

Ahh, here we are:
1.4 What is Oracle Discoverer Administrator?
Discoverer Administrator is used for the initial setup and ongoing maintenance of the End User Layer. Users of Discoverer Administrator are called Discoverer managers. The Discoverer manager performs a variety of tasks including creation and maintenance of business areas, folders, summary table creation, and managing end user access. Discoverer provides extensive defaulting capability to enable managers to rapidly implement their end user environment. Discoverer Administrator is a required component of a complete Discoverer installation and is a component of Oracle Developer Suite
So in order to use Discoverer, which is included within 10g AS Enterprise Edition one also needs a seperate liscence for Oracle Developer Suite.

I have Verizon FiOS service for phone, internet and TV but I only have one TV hooked up for it for just basic cable service with no DVR and no need for widgets. Can I use an Airport Extreme as my router and not use the FiOs router?

I want to use an Airport Extreme as my router. I currently have a Verizon FiOS router. I have Verizon for phone, internet and TV. However, TV-wise, I just have a basic service for one TV with just a regular box. No HD, no DVR. Don't need access to a menu, widgets, on-demand. Can I eliminate the FiOS Router and just use the Airport Extreme and still have phone and internet?

I know that it will increase my wireless coverage in my house but will it increase the speeds?
Not sure what you are asking here. The AirPort Extreme is only going to be as fast as the Internet connection that it receives.....which is 75/75. It cannot take a 75/75 connection and make it go any faster.
If you locate the AirPort Extreme in an area where you need more wireless signal coverage, the AirPort Extreme would deliver 75/75 in that area. But, keep in mind that the AirPort Extreme must connect to the FIOS router using a permanent, wired Ethernet cable connection.
If you are asking if the AirPort Extreme can wirelessly connect to the FIOS modem router, and extend the FIOS wireless network, the AirPort Extreme would not be compatible with a FIOS product for that purpose.

What are the BP and BF need for E- Recruitment configuration?

Dear All,
We are going to implement E-Recruitment.
System is ECC6, EHP6 and portal 7.3
Client is Indian
We are going to deploy below Business Packages in portal.
BP Recruiter
BP Recruiter Administrator
We are going to activate below Business Functions in ECC.
HCM_ERC_CI_1
HCM_ERC_CI_2
HCM_ERC_CI_3
HCM_ERC_CI_4
Are there any other to deploy BP and activate BF?
Please guide me on this.
Regards
Anoku

Hi Anoku,
Please check the prerequisites for the business functions. You can find the documentation regarding the business functions in transaction SFW5.
For example: Starting from HCM_ERC_CI_2, you will need to activate HCM_ERC_SES_1 as a prereq.
Keep in mind: You only need to activate the business functions which bring you the functionality you need.
Regards,
Luk

Dimension and Facts need for telecommunication industry

Hi All,
I am preparing a raw datamodel for a telecommunication client. I would like have ur inputs on what all dimension i can have and fact for the following subjetcs.
1.Customer Retention
2.Customer Profiling and Se4gmentation
3.Customer Care
4.Campaign Management
5.Forecasting and Service Planning
6.Product Profitability
I need help to form a raw data model. Pls help me out. looking forward to hear from u all.
Regards
Natesh

The issue is resolved

Question about Photoshop Premier and the need for coreaudio.dll drivers

I downloaded Photoshop Premier Elements. When I run the video edit part of the program, I get an error saying the program cannot find coreaudio.dll and coreaudiotoolbox.dll. I'm using Windows 8.1. Are these drivers necessary? If so, how do I get them? Thx

There is a dedicated forum for Premiere Elements:
Premiere Elements
You'll get the best advice there.

Testing and feedback needed for project

here
http://www.armoredlegion.com
we're looking for feedback and suggestions for our game
armored legion
we've been working on it for about 4 months (minus a big
break over christmas), it has about 16 planets to visit currently,
procedurally generated (props and more distinguishing faetures are
coming soon), and player versus player combat
the server is custom written in c++, there are about 15k
npc's spread across the worlds currently, and several hundred
players per world is supported
thanks
- ZookazRules

quote:
Originally posted by:
Newsgroup User
This is nice, but sorry - I simply cannot accept worlds with
no
lightmaps and shadows any more. This is 2009 not 1999 !!!
I've been pretty busy this week with real work (sigh), but I
made a few minutes to throw in a quick shadow, just for you :)
As for lightmaps, although they're trivial to add, I haven't
for a couple of reasons. First off, the DCR is already getting a
little large and there are so many other things that would offer
more bang for the buck. Secondly, I don't really think they're all
that necessary for these landscapes. I can't imagine much benefit
to lightmapping some hills. If I were to add some buildings, some
ruins, etc... then its an area to revisit.
To tyree_2: The combat was a design choice, real-time
wouldn't have taken any longer to implement. I grew up on games
like Final Fantasy, Chrono Trigger, and similar games, so I wanted
to bring back that style of combat in this one. In time more
options, as well as group combat, etc... will be added.
To Nanomedia: I'm not quite sure what you mean by that?
Unless you had an existing account, you should have been taken
through a tutorial and given a chance at combat right away.

HomeHub and the need for hard wiring

I'm currently planning the wiring for our small extension. I want to be able to use the Smart functions on our TV and in particular download films/programmes and will be switching to BT Infinity to make the experience as painless as possible. My question is, should I run a cable from the HomeHub to the TV to improve its performance or is the Homehub's wireless performance up to the job? Thanks

Sonichedgehog wrote:
Thanks gents. That's what I figured. Just leaves me with the headache of how to route all the cables!
Don`t forget, you can use Powerline adapters, as described on my website.
There are some useful help pages here, for BT Broadband customers only, on my personal website.
BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones.

Help and advice needed for Backberry Pearl 3G 9105

I am trying to access sms messages that i have received but did not reply to, i know the folder but there are other sms messages missing that i have saved?
Also how can i copy the sms saved messages folder to some where else like faourites?
Any advice would be appreciated.

You can't move "that" folder.
But do you currently have your SMS messages as a part of the overall main Messages folder?
If you want to move THOSE to a separate SMS folder... Go to your main Messages folder and select Options > Inbox Management > and UNcheck the "Text Messages" options to create a disinct folder for SMS.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Logic and coding needed for CU42

Hi,
I want to write a BDC program for transaction CU42 inorder to change single level BOM explosion to multilevel.There are around 10k materials.
So please provide me the logic and if possible coding for that.
Regards,
Ramesh

Hi Ramesh,
Check the below tables.
CUCO                           Additional Data for Configurable Objects
CUCU                           Dependency Source Code Base: Source text:
CUCVRNT                     Variants of Constraints
CUEX                            Dependency Storage - Compilation
CUFM                           Customizing: Class/Config: Screendesigner
CUICONTEXT                 Control Table for Context in the iPPE Work
CUKB                           Administrative Information for Dependency
CUKBT                          Text Table for Dependency Maintenance Admi
CUKN                            Dependency Storage - Variants/Configuratio
CULL_TRACEFILTER      Filter for Low-Level Configuration Trace
CUOB                           Assignment of Object to Dependency
CUOBOM_CHANGE      Manually Changed Items in the Order BOM
CUPE                           Extension to BOM Item for Variants
CURSADD                    Dependency Net Additional Data
Pls reward if it is useful.
Regards,
Boobalan Suburaj.

HT1212 My Ipad has shut off I guess and cannot get it to turn back on! Please help It is a school issued product and is needed for school. I have it plugged up but it doesnt even say that is charging.

I had my Ipad up on a charger in my class and when I went to pick it back up the screen wouldn't turn on or do anything. Please help!!

While aimed at the iPhone, the sections under Power/Battery and Display in this support article will largely still apply and may be of help:
http://support.apple.com/kb/TS2802
If not, your iPad may have suffered a hardware failure, in which case you'll have to ask your school how to proceed.
Regards.

SQLPlus and SQLLoader needed for Sparc Solaris 2.6

Similar Messages

Maybe you are looking for