Sqlplus can't connect to database from within a Virtual PC

Yes I know it's not supported but this question is for those people who want to help or have actually got it working :-)
I have an XP machine with a 10gR2 database.
I have a virtual machine on that XP machine which has the 10gR2 client installed on it.
While the configuration doesn't necessarily make sense (normally you'd put the database in the VM ) it's done for testing reasons.
All firewalls are off. The database is up and connections to is are fine from other machines.
The virtual PC can ping the host and tnsping the listener without a problem but any attempt to connect using sqlplus gives an error
ERROR:
ORA-12154: TNS:could not resolve the connect identifier specified
C:\Documents and Settings\Administrator>tnsping myc10a
TNS Ping Utility for 32-bit Windows: Version 10.2.0.1.0 - Production on 06-AUG-2
008 10:10:02
Copyright (c) 1997, 2005, Oracle. All rights reserved.
Used parameter files:
C:\oracle\product\10.2.0\client_1\network\admin\sqlnet.ora
Used TNSNAMES adapter to resolve the alias
Attempting to contact (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST = pwrwks10
20)(PORT = 1521)) (CONNECT_DATA = (SERVER = DEDICATED) (SERVICE_NAME
= MYC10)))
OK (20 msec)
C:\Documents and Settings\Administrator>sqlplus cms/cms@myc10a
SQL*Plus: Release 10.2.0.1.0 - Production on Wed Aug 6 10:10:06 2008
Copyright (c) 1982, 2005, Oracle. All rights reserved.
ERROR:
ORA-12154: TNS:could not resolve the connect identifier specified
It's quite obviously an issue with the virtual PC. Has anyone tried this and have they figured out how to get it to work?
Regards,
David

ERROR:
ORA-12154: TNS:could not resolve the connect
identifier specified
C:\Documents and Settings\Administrator>sqlplus
cms/cms@myc10a
SQL*Plus: Release 10.2.0.1.0 - Production on Wed Aug
6 10:10:06 2008
Copyright (c) 1982, 2005, Oracle. All rights
reserved.
ERROR:
ORA-12154: TNS:could not resolve the connect
identifier specifiedORA-12154 means "I looked in the TNSNAMES.ORA file I am trying to use (out of the potentially several on the machine) but I could not find an entry with "myc10a =", or "myc10a.{default_domain in the sqlnet.ora} ="
All tnsnames.ora entries look like
alias = description( ... )
and it can not find your alias. You might have several tnsnames.ora files. Or your file is not correct. Or you also have a sqlnet.ora file that contains a default domain entry, which would be appended to any alias passed in without a '.domain'
Suggest you post the tnsnames.ora and the sqlnet.ora
(And yes, I have that configuration working.)
Message was edited by:
Hans Forbrich

Similar Messages

Can I compare two databases from within SQL Server Management Studio

Hi everyone. I haven't found anything online, so I wanted to ask here. I have two SQL Server databases running on our server. One is the production database, and another is my development database that I use when I'm working on the program.
I add tables and columns and stuff to my development database, and was wondering if anyone knew of an easy way to from within Management Studio or something to compare the two databases to make sure that they are the same and show me any differences.
I generally add tables or columns to both databases at the same time, but I worry that one time I might forget, so I would like to be able to run some sort of compare / check to make sure before releases...
Thanks everyone for your help. I greatly appreciate it.

There is a command line utility that is with Microsoft SQL Management Studio called
tablediff:
http://msdn.microsoft.com/en-us/library/ms162843%28v=sql.105%29.aspx
An example:
http://www.mssqltips.com/sqlservertip/1073/sql-server-tablediff-command-line-utility/
And using it with multiple tables at once looks like some work but doable:
http://blogs.msdn.com/b/repltalk/archive/2010/02/21/how-to-run-tablediff-utility-for-all-replicated-published-tables-in-sql-2005-or-sql-2008.aspx
...and some custom code to implement in an answer at StackOverflow:
http://stackoverflow.com/questions/10688/best-tool-for-auto-generating-sql-change-scripts-for-sql-server?rq=1

Can't "connect to database" from Dreamweaver CS3

This question maybe more appropriate for the PHP or MySQL Forum but since the problem is encountered in Dreamweaver CS3, I am going to first try getting help on this Forum.
I have a LINUX CentOS 5.3 Server with Apache (httpd-2.2.3) & PHP-5.1.6 installed. I also have a text site; httpd://ip.tib.com on it.
I am using a WinXP with DW CS3 to develop & test the above web site. Currently I am trying to setup a test dynamic page and am reading Dreamweaver USER GUIDE page 514 Chapter “Database Connections for PHP Developer”.
FYI, the Remote & Test Servers are setup for the web site under construction and connections to both are tested successfully from DW CS3.
Now when I try to test “Connect to a database” (Dreamweaver USER GUIDE page 514) , I get the following error message:
Your PHP server doesn’t have the MySQL module loaded or you can’t use mysql_(p)connect function.
First of all, I can connect to the MySQL server and create/edit/delete tables from WinXP using Navicat Package. I have looked into “php.ini” on the LINUX server but can’t figure out what changes I need?
Any help is highly appreciated.

I have resolved this problem.
PHP 5.3 no longer bundles the MySQL libraries. I couldnot find the missing libraries anywhere. I switched back toolder versions of both MySQL & PHP, where MySQLlibraries are bundled with PHP package.
Problem solved.

Can't connect to Database from Database Adapter in BPM 11g

I added a database adapter in BPM 11g to the composite.xml. This database adapter is just to load data into a XML document (UI payload). I can’t seem to get a connection to the database. I am getting a error, see below.
<bpelFault><faultType>0</faultType><bindingFault xmlns="http://schemas.oracle.com/bpel/extension"><part name="summary"><summary>Exception occured when binding was invoked. Exception occured during invocation of JCA binding: "JCA Binding execute of Reference operation 'GetRequestInfoSelect' failed due to: JCA Binding Component connection issue. JCA Binding Component is unable to create an outbound JCA (CCI) connection. FundsDisbursementProject:GetRequestInfo [ GetRequestInfo_ptt::GetRequestInfoSelect(GetRequestInfoSelect_inputParameters,FdRequestHeaderCollection) ] : The JCA Binding Component was unable to establish an outbound JCA CCI connection due to the following issue: BINDING.JCA-12510 JCA Resource Adapter location error. Unable to locate the JCA Resource Adapter via .jca binding file element <connection-factory/> The JCA Binding Component is unable to startup the Resource Adapter specified in the <connection-factory/> element: location='jndi/FDF_Database'. The reason for this is most likely that either 1) the Resource Adapters RAR file has not been deployed successfully to the WebLogic Application server or 2) the '<jndi-name>' element in weblogic-ra.xml has not been set to jndi/FDF_Database. In the last case you will have to add a new WebLogic JCA connection factory (deploy a RAR). Please correct this and then restart the Application Server ". The invoked JCA adapter raised a resource exception. Please examine the above error message carefully to determine a resolution. </summary></part><part name="detail"><detail>JCA Resource Adapter location error. Unable to locate the JCA Resource Adapter via .jca binding file element <connection-factory/> The JCA Binding Component is unable to startup the Resource Adapter specified in the <connection-factory/> element: location='jndi/FDF_Database'. The reason for this is most likely that either 1) the Resource Adapters RAR file has not been deployed successfully to the WebLogic Application server or 2) the '<jndi-name>' element in weblogic-ra.xml has not been set to jndi/FDF_Database. In the last case you will have to add a new WebLogic JCA connection factory (deploy a RAR). Please correct this and then restart the Application Server </detail></part><part name="code"><code>12510</code></part></bindingFault></bpelFault>
The docs says I need to add an Outbound Connection Pool to to SOA DbAdaptor in WebLogic. The problem is I can’t seem to make my changes take effect. This is the same error recorded here:
BPEL DB adapter
The problem is when trying to change the property, xADataSourceName, the changes don’t take effect. I also notice that in our test environment I get a dialog box to change the deployment plan. On my local WLS, I don’t get this dialog box. Either way the changes to xADataSourceName will not take effect.
There must be a simple solution, I just don’t see it.
Any help is greatly appreciated.
Regards,
Mark
Edited by: M Peterson on Jul 15, 2010 5:33 AM

When you enter the xADataSourceName property, did you hit enter on the field? If you simply tab off the field and hit save changes without hitting the enter key then it doesn't record the change to the property.

When connect the Database from Toad , Sqlplus giving the error

when connect the Database from Toad , Sqlplus giving the error
recent changes 12.1.1 installatiojn
Oracle SQL plus encountered a problem and needs to close we are sorry for convenienvce
Oracle Forms Designner has encountered a probloem and needs to close we are sorry for the convenience
Thanks & Regards,
sree

when connect the Database from Toad , Sqlplus giving the error recent changes 12.1.1 installatiojnHave you tried using the same user via simple sqlplus on the database server or apps tier server itself? Please try the same database user/login on the database server using the sqlplus available on the server itself. See what message do you get. If the the login happens, then try with the tns entry e.g. sqlplus username/password@prod and see if that works on the db server. If both of these conditions work the check where is Toad picking up the tns entry from on the client pc/laptop. If first test fails, then check if the account is locked.
Hope this helps.

Managed Server can not connect to Database

I have a WebLogic cluster with three managed Server on 3 different machines.
ManagedServer_1, ManagedServer_2, ManagedServer_3 (on Machine 3)
Firstly, everything is ok. But when we changed some configuration on Firewall and make the WebLogic cluster could not connect to database. 3 servers change status from Running to Warning. Then, we undo all the changes to the Firewall configuration. 3 Servers could connect to Database again but still in warning state.
It is strange that when I tried to restart ManagedServer_3. That server could not be up normally. It went to Admin state and all the datasources and connection pool could not be created. I tried to restart the machine 3 and start the server but it still failed to make server running normally.
( I made the test connecting to Database from Machine 3, everything is okie, I can got data from database, port 1521 opened )
Has anyone got the same problem and how to fix it? Is that the problem with the admin server?

JDBC DataSources/Connection pools are all at Domain Level. All we do is just target the datasources to AdminServer and Entire cluster (this will take care of all managed servers in the cluster). From Weblogic Console, TEST the data sources for any firewall issues. If this works from console, check from where you are accessing the Console like within the Firewall, that can access the database server. Even though the actual application is deployed only on cluster, still I would recommend targetting the datasources to both AdminServer and Cluster.
Ravi Jegga

Not able to connect RAC database from client

Hi there
Recently I have configured RAC in test environment. version 11.2.0.1. OS Redhat 5.9. Everything seems to be fine except not able to connect rac database from client. Error is as under :
C:\Documents and Settings\pbl>sqlplus test1/test1@myrac
SQL*Plus: Release 10.2.0.1.0 - Production on Mon Nov 17 14:29:06 2014
Copyright (c) 1982, 2005, Oracle. All rights reserved.
ERROR:
ORA-12545: Connect failed because target host or object does not exist
Enter user-name:
myrac =
(DESCRIPTION =
    (ADDRESS_LIST =
      (ADDRESS = (PROTOCOL = TCP)(HOST = rac-scan)(PORT = 1521))
    (CONNECT_DATA =
      (SERVICE_NAME = racdb.testdb.com.bd)
Please give me your valuable suggestion to overcome the issue.
Regards
Jewel

user13134974 wrote:
ORA-12545: Connect failed because target host or object does not exist
This error means that the hostname or IP address used in the TNS connection string, failed to resolve or connect.
Your client is making two connections. The first connection is to the SCAN listener. It matches a db instance for your connection request based on service requested, available registered service handlers, load balancing, and so on. It then send a redirect to your client informing it of the handler for that service.
Your client then does a second connection to this service (a local RAC listener that will provide you with a connection to the local RAC instance). This is what seems to be failing in your case.
The SCAN listener's redirect uses the hostname of the server that the local listener is running on. Your client needs to resolve that hostname (of a RAC node) to an IP address. This likely fails.
You can add the RAC node hostnames to your client platforms hosts file. The appropriate action however would be to ensure that DNS is used for name resolution instead.

Oracle Enterprise Manager can't connect to database after installation

Hello, I have a problem with Enterprise Manager. I installed Oracle 10g and the patch 10.2.0.2. After install, I could connect to database from SqlPlus without problems, but when I try to connect from AllPrograms - Oracle - DatabaseControl or since the Web browser with http://servername:1158/em nothing happen. I reviewed the status of dbconsole with emctl status dbconsole but the status is running. I recreated the repository with emca -deconfig.......-repos drop and emca -config ...... -repos create , but nothing happened. I reviewed some threads in this forum, but I didn't find the solution. Finally I could connect from the browser but with http://localhost:1158/em. Do you help me how can I connect from Database Control, because the operators in Computer Center should monitor the instance since there, and when I want to connect since my own PC how can do it?
Thanks for your help and excuse my English, I am from Bogotá Colombia.
Sincerely Rubén

Hi,
Check the network connectivity between db server and pc from where u want to access em.
Check the listener service.
Check firewall settings, it should be off.
Regards,
Xaheer

Can't connect to database after restarting, TNS Error

I'm a little new to Oracle 10g administration. I successfully installed it on Oracle Enterprise Linux. Immediately after installation, I was able to connect to the default ORCL database using sqlplus. However, when I restarted the computer, I was no longer able to do so, even after restarting the listener service.
Here is the error I get:
ORA-12514: TNS:listener does not currently know of service requested in connect
descriptor
The other strange thing is, whenver I create a new database using dbca, immediately after that I can connect via sqlplus. However, if I perform a shutdown/startup, I get the same error as above. Restarting the listener doesn't make any difference.
A tnsping to my new database is successful but I can't connect to it from sqlplus.
Running the 'lsnrctl services' command immediately after making the new database shows it running but after a shutdown/restart only the default EXTPROC service shows.
Can anyone tell me why this happens and how to resolve it? Is there some other service I have to restart? Also, why does the listener not know of the service when it is explicitly configured in the tnsnames.ora file?
Note that I change my ORACLE_SID to the service name before attempting to connect.
Everything in the listener and tnsnames files was coded by the software, not by me.
Thanks for any help.
Here is my listener file:
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = PLSExtProc)
(ORACLE_HOME = /opt/oracle/product/10gR2)
(PROGRAM = extproc)
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = linux)(PORT = 1521))
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1))
______________________________________________

I played around a little by deleting and creating databases. Here is my current tnsnames file:
TESTDATA =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = linux)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = TESTDATABASE)
ORCL =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = linux)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = orcl)
EXTPROC_CONNECTION_DATA =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1))
(CONNECT_DATA =
(SID = PLSExtProc)
(PRESENTATION = RO)
I just made the database called TESTDATA. Here is the output of the command 'lsnrctl services', where the TESTDATABASE service refers to the database I just made:
[oracle@linux ~]$ lsnrctl services
LSNRCTL for Linux: Version 10.2.0.1.0 - Production on 11-JUL-2007 22:19:47
Copyright (c) 1991, 2005, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=linux)(PORT=1521)))
Services Summary...
Service "PLSExtProc" has 1 instance(s).
Instance "PLSExtProc", status UNKNOWN, has 1 handler(s) for this service...
Handler(s):
"DEDICATED" established:0 refused:0
LOCAL SERVER
Service "TESTDATABASE" has 1 instance(s).
Instance "TESTDATABASE", status READY, has 1 handler(s) for this service...
Handler(s):
"DEDICATED" established:13 refused:0 state:ready
LOCAL SERVER
Service "TESTDATABASEXDB" has 1 instance(s).
Instance "TESTDATABASE", status READY, has 1 handler(s) for this service...
Handler(s):
"D000" established:0 refused:0 current:0 max:972 state:ready
DISPATCHER <machine: linux, pid: 25175>
(ADDRESS=(PROTOCOL=tcp)(HOST=linux)(PORT=38662))
Service "TESTDATABASE_XPT" has 1 instance(s).
Instance "TESTDATABASE", status READY, has 1 handler(s) for this service...
Handler(s):
"DEDICATED" established:13 refused:0 state:ready
LOCAL SERVER
Service "test2.class" has 1 instance(s).
Instance "test2", status READY, has 1 handler(s) for this service...
Handler(s):
"DEDICATED" established:0 refused:0 state:ready
LOCAL SERVER
Service "test2_XPT.class" has 1 instance(s).
Instance "test2", status READY, has 1 handler(s) for this service...
Handler(s):
"DEDICATED" established:0 refused:0 state:ready
LOCAL SERVER
The command completed successfully
[oracle@linux ~]$
Now I'm connecting and here is my result:
[oracle@linux ~]$ sqlplus /nolog
SQL*Plus: Release 10.2.0.1.0 - Production on Wed Jul 11 22:21:24 2007
Copyright (c) 1982, 2005, Oracle. All rights reserved.
SQL> connect sys/pwd@testdata as sysdba
Connected.
SQL>
I am able to access the database from the OEM.
Now, here's what happens next. I shutdown the database from sqlplus and now when I restart, I get this message:
SQL> startup
ORA-24324: service handle not initialized
ORA-01041: internal error. hostdef extension doesn't exist
Now, if I exit sqlplus, enter again and try to connect, I get this error:
oracle@linux ~]$ sqlplus /nolog
SQL*Plus: Release 10.2.0.1.0 - Production on Wed Jul 11 22:28:01 2007
Copyright (c) 1982, 2005, Oracle. All rights reserved.
SQL> connect sys/pwd@testdata
ERROR:
ORA-12514: TNS:listener does not currently know of service requested in connect
descriptor
SQL>
Any solutions? I appreciate your help.

Problem in connecting to database from webdynpro for java

Hi
I have a problem in connecting to database from webdynpro application
I am using oracle 10 express edition as database and was able to connect to database from a java application.But was unable to connect from a webdynpro for java.
<b>I guess webdynpro for java uses open sql instead of vendor sql(I looked in the visual admin ,DB is using open sql) so unable to connect to database.Am i right.?</b>
Do i need to make any settings in the visual admin to make it work?
How to solve this problem.Please give me pointers
Thanks
Bala

Hi,
For connecting to Oracle, either you can use the normal JDBC connectivty code directly which is given below :
DriverManager.registerDriver(new oracle.jdbc.driver.OracleDriver());
Connection conn = DriverManager.getConnection("jdbc:oracle:thin:@Oracle_server_ip:Oracle port:SID of the Database","user_name","password");
Statement stmt = conn.createStatement();
ResultSet rs = stmt.executeQuery("your query");
In case you want to fetch data through ejbs, these are the steps to be followed :
1) Open the J2EE perspective
2) Create an EJB Module project
3) Right click on ejbModule, create a new EJB (select your EJB type)
4) While creating the ejb itself, you can add business methods by clicking Next in the UI. Another option is after creating the ejb, write the method in the bean, then select the method from ejb-jar.xml -> <bean name> ->method. Right click and select propogate to local & remote.
5) Double click on ejb-j2ee-engine.xml. select your bean and specify a Jndi name for eg: MyJndi.
6) Right click on the EJB project and add classes12.zip file (provided by Oracle) to its build path. (under libraries tab). Also check the same file under Order & Export.
7) Create an Enterprise Application project.
8) Right click on the EJB module project and select add to EAR project, then select the created EAR project.
9) Right click on the EJB project, select Build EJB Archive
10) Right click on the EAR project, select Build Application Archive
11) Open the WebDynpro perspective, open a new project, right click on the project ->properties. Do the following configurations :-
Java Build path - select the EJB project from projects , check the selected project under Order & Export
Project references select the EAR project
WebDynpro references select sharing references tab, click add & make an entry as : <vendor>/<EAR project name without .ear extension>
You can find the vendor name under application-j2ee-engine.xml file of the EAR project. By default it is sap.com. So if my EAR projects name is ABC, my entry would look like sap.com/ABC
12) Now the configurations are over and the EJB can be invoked by writing the client code inside the webdynpro component. Like:
InitialContext context = new InitialContext();
Object obj = context.lookup("MyJndi");
MyEJBHome home = MyEJBHome)PortableRemoteObject.narrow(obj,MyEJBHome.class);
MyEJB mybean = home.create();
int a = 0;
a= mybean.add(10,15);
wdContext.currentContextElement().setSum(a);
where MyEJB is my EJB name and MyJndi is my JNDI name
To connect to Oracle , you can write the usual Java code (given below) as a business methos of the ejb (similar to add() method in the example). And access it like mybean.<businessMethodName>().
DriverManager.registerDriver(new oracle.jdbc.driver.OracleDriver());
Connection conn = DriverManager.getConnection("jdbc:oracle:thin:@Oracle_server_ip:Oracle port:SID of the Database","user_name","password");
Statement stmt = conn.createStatement();
ResultSet rs = stmt.executeQuery("your query");
Extracted from Re: Webdynpro and Oracle
http://help.sap.com/saphelp_webas630/helpdata/en/b0/6e62f30cbe9e44977c78dbdc7a6b27/frameset.htm
May be of use to understand the VA Conf /people/varadharajan.krishnasamy/blog/2007/02/27/configuring-jdbc-connector-service-to-perform-database-lookups
Regards
Ayyapparaj

Not able to connect to database from Form builer

Hi ,
I installed oracle 10 g in my machine and is accessable from SQLPLUS & TOAD.
In the same drive i installed Form builder, i am getting the below error when i tried to connect DB from form builder.
ORA- 12154 : TNS : could not resolve service name.
Kindly do the needfull.

not able to connect to database from Form builder

How to Connect Oracle database from excel

I have installed oracle 11g on Windows 8 64 bit OS on my laptop. I have Microsoft excel 2013. I can connect to database from SQL and from TOAD. Now i want - from excel to connect to database.
Please guide me the steps.
Thanks

Below link may be helpful to you :
http://khalidali-oracledba.blogspot.in/2013/09/connection-between-ms-excel-to-oracle.html
And if you are getting 32 bit vs 64 bit ODBC driver issue then :
https://social.technet.microsoft.com/Forums/office/en-US/2234554e-e93c-438b-990a-6739df19da44/odbc-connection-problem-in-excel-2013-64-bit-windows-8-os-and-x64-processor-oracle-8i?forum=excel
And still you are not able then post the question in :
ODBC
Regards
Girish Sharma

How to connect oracle database from tuxedo

Hi,
How to connect oracle database from tuxedo.
If any one can help me.
Regards,

it depends on configuration your going to choose, there are two ways--
- Using X/Open standards, for this
you have to make an entry of Resource manager in $TUXDIR/udataobj/RM file.
Then in UBBConfig file in GROUPS section u have to set Openinfo.
It also depend on which database you are going to use.
In your service now you need to call tpopen() API from tpsvrinit() function.
- Other possibility is, take an implicit connection using Pro*C or Pro*Cobol whatever platform you are using.
EXEC SQL Connect ...

Can we put multiple Database Polling within the asynchronous process

Hi,
Can we put multiple Database polling within the the same asynchronous BPEL process.
There will be multiple Receive activities to receive the data from the poller.
Saptarishi

Hi Peter,
I am using 10.1.3.4 and cannot use ESB/mediator.
For the 2nd option,
I have tried to put multiple receive's to poll data from a table but it does not work(it waits at the 2nd Receive). Let me try to elaborate the issue a bit.
I have created a table for polling.
The table has 3 columns :- transaction_id, status, is_read
is_read is kept to implement the logical delete strategy of DB polling.
What I need to do is to maintain a single instance of BPEL to maintain a transaction(which is uniquely identified by transaction_id).
The BPEL should track the different stages of the transaction, i.e whenever a new row is inserted in the table with the updated status for a transaction, it must find the correct instance(by co-relating the transaction_id) and go to the next step (wait for the next receive activity) until all the steps of the transaction is completed.
In the code, I created a correlation set consisting of transaction_id(only). The property transaction_id has an alias to the inbound variable's payload.
In the first Receive, I checked the "create instance" checkbox. Also the correlation set is initialized.
From next Receive onwards the correlation set is checked.
The polling frequency is 5 secs.
The first Receive works fine and the process is instantiated. But it waits at the 2nd Receive indefinitely.
It will be very helpful if you can try this once. If you feel this is not the right approach, please guide me.
Thanks and Regards,
Saptarishi

Getting error "Can't connect to database DBMS is not supported in your current installation" in Demantra

Hi,
I have installed Microsoft Win x64(64-bit) Demantra 7.3.1.5 on Win 7(64-bit).
When I try to open Business Modeler or Demand Planner or Business Logic Engine from :
Start -> Oracle Demantra Spectrum , I am getting same error "Can't connect to database DBMS is not supported in your current installation"
Below is a screenshot of same.
I can connect to Collaborator Workbench though, but when I click on any of the "Planning Applications" from the menu in Collaborator Workbench window, again error is thrown.
Error is " Application could not be run! Error : undefined " as below :
I have installed Oracle DB Enterprise edition 11gR2(64-bit)
Please suggest where I am doing wrong.
Regards,
Vinni Sharma.

Hi Sharma,
Is this issue resolved? or still facing the same problem?
We need to setup connections details in ds.ini file under demantra_installation\Demand Planner\Security Management folder on the server side.
Regards,
Akshay

Sqlplus can't connect to database from within a Virtual PC

Similar Messages

Maybe you are looking for