Sqlplus SPOOL broken. Urgent help.

I have never seen this before.
I am running a spool of a small query. It returns 7 rows and they are displayed. I go to look at the .lst file and the first row is gone from the spooled .lst file. I have tried this multiple times, and the results vary- sometimes it removes the first row and sometimes it removes the first column of data form the first row.
??????????????? Any idea where to start looking for trouble other than the alert.log?

> Urgent help.
My usual soapbox response (again).
Please do not call your problem urgent. Why?
Because you are saying that your problem is more important and more deserving attention than other people who post problems here. That is just a rude and arrogant thing to do. Your problem is by no means more important than any other person's problem in this forum - as you are in no position to compare and judge that.
You are also demanding a quick response from those here that assist people like you. You have no right to demand anything as paid professionals are giving you their free time in assisting you. How can you claim that they must be "quick-quick" in spending their free time, without any payment, to assist you?
So, practice some netiquette and remember that this is a PUBLIC forum and "staffed" by volunteers.

Similar Messages

Hi guys urgent please help me ASAP my ipod touch 4g reboots/restarts over and over again and i cant enter DFU mode cause my home button is stuck/broken please help guys i cant enter itunes too cause it said it needs my passcode

hi guys urgent please help me ASAP my ipod touch 4g reboots/restarts over and over again and i cant enter DFU mode cause my home button is stuck/broken please help guys i cant enter itunes too cause it said it needs my passcode the problem is i cant even enter my passcode in my ipod touch cause its rebooting over and over again help please guys

- See if this program will place it in recovery mode since that erases the iPod and bypasses the passocode.
RecBoot: Easy Way to Put iPhone into Recovery Mode
- Next try letting the battery fully drain. The try again.

(SQLPlus) SPOOL

(SQLPlus) SPOOL
HI,
can anyone help me on this? i want to create a csv file that will have a certain filename coming from a variable from a query. the ff codes does not work :( any help pls! THANKS in advance
BROKEN
select customer_name into v_name from demo_customers where cust_id = 1;
SPOOL ..\data\order_&v_name&.csv
SELECT
order_id || ',' ||
order_total || ',' ||
order_datetime
FROM
demo_orders
WHERE
customer_id =1;
SPOOL OFF;
exit;
------------------------------------------------------------------------------------------------------------------

to a bind variable yes, in plsql. To a "define" variable no.
SQL> var n number
SQL> set autopri on
SQL> exec select 1+1 into :n from dual;
PL/SQL procedure successfully completed.
N
2

Need urgent help with Ifs1.1 on Solaris

We have installed IFS 1.1 with Oracle 8.1.7 on a three tier System (two Suns). We use JWS as WebServer. When we start IFS and JWS everything seems to work fine. But after some time (irregulary) we are not able to contact the JSP-Sites via a bowser. After restarting JWS, everything works fine for some time.
Sometimes it happens (about one times a day), that the whole JWS crashes (JWS-Admin doesn't work). So we have to restart the whole IFS.
What can be the problem? We need urgent help, because the deadline for our project is Wednesday.
By the way:
Where do I have to start CTX on the IFS- or the Oracle-Side?
null

Yes, we tried the Oracle HTTP - Server, but we weren4t able to get it to work. We didn4t get our JSP-Files to work with it. But that is another issue. I think it4s not a problem of JWS, but IFS.
Additionally it is strange, that we are still able to connect to the database via SqlPlus.
IFS works fine for about 15 minutes, than it crashes, nothing works anymore. We found following errors in the IfsAgents.log:
maybe it can help?!
Mon Dec 04 23:12:20 CET 2000
Server STARTED: IfsAgents(19944) not managed
Attempting to load agent EventExchangerAgent
Agent EventExchangerAgent loaded
Server STARTED: IfsProtocols(19945) not managed
Attempting to start agent EventExchangerAgent
EventExchangerAgent: Start request
Agent EventExchangerAgent started
Attempting to load agent ExpirationAgent
Agent ExpirationAgent loaded
EventExchangerAgent: starting timer
Attempting to start agent ExpirationAgent
ExpirationAgent: Start request
Agent ExpirationAgent started
Attempting to load agent GarbageCollectionAgent
Agent GarbageCollectionAgent loaded
ExpirationAgent: computed initial delay (in ms) is: 10024504
ExpirationAgent: starting timer
Attempting to start agent GarbageCollectionAgent
GarbageCollectionAgent: Start request
Agent GarbageCollectionAgent started
Attempting to load agent ContentGarbageCollectionAgent
Agent ContentGarbageCollectionAgent loaded
GarbageCollectionAgent: computed initial delay (in ms) is: 11816890
GarbageCollectionAgent: starting timer
Attempting to start agent ContentGarbageCollectionAgent
ContentGarbageCollectionAgent: Start request
Agent ContentGarbageCollectionAgent started
Attempting to load agent DanglingObjectAVCleanupAgent
Agent DanglingObjectAVCleanupAgent loaded
ContentGarbageCollectionAgent: starting timer
Attempting to start agent DanglingObjectAVCleanupAgent
DanglingObjectAVCleanupAgent: Start request
Agent DanglingObjectAVCleanupAgent started
Attempting to load agent OutboxAgent
Agent OutboxAgent loaded
DanglingObjectAVCleanupAgent: computed initial delay (in ms) is: 5500105
DanglingObjectAVCleanupAgent: starting timer
Attempting to start agent OutboxAgent
OutboxAgent: Start request
Agent OutboxAgent started
Attempting to load agent ServiceWatchdogAgent
Agent ServiceWatchdogAgent loaded
OutboxAgent: Done processing
Attempting to start agent ServiceWatchdogAgent
ServiceWatchdogAgent: Start request
Agent ServiceWatchdogAgent started
Attempting to load agent QuotaAgent
Agent QuotaAgent loaded
ServiceWatchdogAgent: Initializing ServerWatchdogTable with 9 entries
ServiceWatchdogAgent: starting timer
Server STARTED: FtpServer(20082) managed by IfsProtocols(19945)
ServiceWatchdogAgent: New Server being watchdogged
Attempting to start agent QuotaAgent
QuotaAgent: Start request
Agent QuotaAgent started
QuotaAgent: starting timer
Server STARTED: CupServer(20124) managed by IfsProtocols(19945)
ServiceWatchdogAgent: New Server being watchdogged
Server STARTED: ImapServer(20130) managed by IfsProtocols(19945)
ServiceWatchdogAgent: New Server being watchdogged
Server STARTED: SmtpServer(20150) managed by IfsProtocols(19945)
ServiceWatchdogAgent: New Server being watchdogged
ServiceWatchdogAgent: Unlocked Server Detected in checkServer
ServiceWatchdogAgent: Unlocked Server Detected in checkServer
ServiceWatchdogAgent: Unlocked Server Detected in checkServer
ServiceWatchdogAgent: Unlocked Server Detected in checkServer
ServiceWatchdogAgent: Unlocked Server Detected in checkServer
ServiceWatchdogAgent: Unlocked Server Detected in checkServer
ServiceWatchdogAgent: Unlocked Server being investigated
ServiceWatchdogAgent: Unlocked Server being investigated
ServiceWatchdogAgent: Unlocked Server being investigated
ServiceWatchdogAgent: Unlocked Server being investigated
ServiceWatchdogAgent: Unlocked Server being investigated
ServiceWatchdogAgent: Unlocked Server being investigated
ServiceWatchdogAgent: Freeing unlocked server 19687
ServiceWatchdogAgent: Freeing unlocked server 19666
Server STOPPED: CupServer(19687) managed by IfsProtocols(19519)
ServiceWatchdogAgent: Freeing unlocked server 19723
ServiceWatchdogAgent: Freeing unlocked server 19520
Server STOPPED: FtpServer(19666) managed by IfsProtocols(19519)
Server STOPPED: SmtpServer(19723) managed by IfsProtocols(19519)
ServiceWatchdogAgent: Freeing unlocked server 19519
Server STOPPED: IfsAgents(19520) not managed
ServiceWatchdogAgent: Freeing unlocked server 19712
Server STOPPED: IfsProtocols(19519) not managed
Server STOPPED: ImapServer(19712) managed by IfsProtocols(19519)
ServiceWatchdogAgent: Freed Server removed from watchdog list
ServiceWatchdogAgent: Freed Server removed from watchdog list
ServiceWatchdogAgent: Freed Server removed from watchdog list
ServiceWatchdogAgent: Freed Server removed from watchdog list
ServiceWatchdogAgent: Freed Server removed from watchdog list
ServiceWatchdogAgent: Freed Server removed from watchdog list
QuotaAgent: Timer event: 0 active; 0 exceeded
ContentGarbageCollectionAgent: Freed 5 unreferenced ContentObjects
QuotaAgent: Timer event: 0 active; 0 exceeded
ServiceWatchdogAgent: IfsException publishing timer details:
ServiceWatchdogAgent: oracle.ifs.common.IfsException: IFS-11012: Unable to get events from other services
java.sql.SQLException: ORA-03114: not connected to ORACLE
ServiceWatchdogAgent: IfsException in checkForDeadServices():
ServiceWatchdogAgent: oracle.ifs.common.IfsException: IFS-10651: Unable to begin transaction
oracle.ifs.common.IfsException: IFS-10603: Unable to set database savepoint
java.sql.SQLException: ORA-03114: not connected to ORACLE
ServiceWatchdogAgent: IfsException in handle loop; continuing:
ServiceWatchdogAgent: oracle.ifs.common.IfsException: IFS-10651: Unable to begin transaction
oracle.ifs.common.IfsException: IFS-10603: Unable to set database savepoint
java.sql.SQLException: ORA-03114: not connected to ORACLE
ServiceWatchdogAgent: IfsException publishing timer details:
ServiceWatchdogAgent: oracle.ifs.common.IfsException: IFS-10651: Unable to begin transaction
oracle.ifs.common.IfsException: IFS-10603: Unable to set database savepoint
java.sql.SQLException: ORA-03114: not connected to ORACLE
ServiceWatchdogAgent: IfsException publishing timer details:
ServiceWatchdogAgent: oracle.ifs.common.IfsException: IFS-10651: Unable to begin transaction
oracle.ifs.common.IfsException: IFS-10603: Unable to set database savepoint
java.sql.SQLException: ORA-03114: not connected to ORACLE
ServiceWatchdogAgent: IfsException publishing timer details:
ServiceWatchdogAgent: oracle.ifs.common.IfsException: IFS-10651: Unable to begin transaction
oracle.ifs.common.IfsException: IFS-10603: Unable to set database savepoint
java.sql.SQLException: ORA-03114: not connected to ORACLE
ServiceWatchdogAgent: IfsException publishing timer details:
ServiceWatchdogAgent: oracle.ifs.common.IfsException: IFS-10651: Unable to begin transaction
oracle.ifs.common.IfsException: IFS-10603: Unable to set database savepoint
java.sql.SQLException: ORA-03114: not connected to ORACLE
ServiceWatchdogAgent: IfsException publishing timer details:
ServiceWatchdogAgent: oracle.ifs.common.IfsException: IFS-10651: Unable to begin transaction
oracle.ifs.common.IfsException: IFS-10603: Unable to set database savepoint
java.sql.SQLException: ORA-03114: not connected to ORACLE
null

Urgent Help In ABAP

Hi Gurus,
Please i need an urgent help from you guys. There is a demand file which consits of (Siteno(plant), Item No ,Item Description, Delivery due date) will be placed in a unix system or windows system. I need to write an interface which shows a radiobutton for unix & windows and fileupload button & download button.When user clicks should be able to select only one radiobutton (unix or windows) to upload or download.When the user clicks the fileupload / download button,it should pick up the file or drop the file at particular unix or windows system.
Please help me or give me sample code where in i can select the radiobutton and i can upload / download from unix or windows path. and during upload process (for both unix/windows) ,i should be able to persist into a custom table (ztable,if iam not wrong) and while downloading read the records from custome table and create an excel file to be placedon unix/windows based on the radio button.
Thanks in advance, i need ur help please.
Regards
Bruno

Hi Bruno,
Please checkout this code sample
ABAP code for uploading a TAB delimited file into an internal table.
The code is base on uploading a simple txt file.
<b>
http://www.sapdevelopment.co.uk/file/file_uptabpc.htm</b>
Thanks,
Aby

URGENT HELP NEEDED (Bios Settings Failed)

Hey Guys,
I am having problems with my MSI Board, and don't know what to do. I am very much a noob to BIOS/and modding so I apologize in advance. You guys helped me a few months ago getting everything up and running and all was great for months. Then last night I walked away from my PC for a while and when i came back a starting screen was on saying my OC Settings Failed to load, i tried other versions I saved and they all failed as well. I ended up loading failsafe options, and got the "double start" where the computer turns on, then instantly shuts off, then turns on again. This allowed me to load windows 7, which then started to "install updates". So i think while i was away Windows automatically updated and rebooted... but would that effect my BIOS settings?
As I said, I had my system running perfect for months no errors or crashes at all based on the Bios setting you guys help me with in this thread: https://forum-en.msi.com/index.php?topic=147854.0
However, last week I removed the heat sink and installed this cooler: http://www.newegg.com/Product/Product.aspx?Item=N82E16835181010&nm_mc=OTC-Froogle&cm_mmc=OTC-Froogle-_-Water+Cooling-_-Corsair-_-35181010
All I did was unhook everything from the MB, install the cooler, and then hook everything back up to the MB. The only thing I may have done wrong is not connect the SATA devices (my HDs and ROMS) back in the spots they were in originally. However after I installed the cooler, they system booted right up, and I haven’t had any problems with my system for the past two weeks. I also should note I didnt make any BIOS changes either after I installed the cooler. So I don’t know if I should have done something there. Yet, like I said the system has been fine for the past two weeks, no crashes or errors... it wasn’t until last night after Windows auto updated that this has begun.
The reason I need "URGENT HELP" is because of course I just a new job with deadlines due and so much video editing work I need to do. I would be fine leaving it on failsafe settings, and forgetting the OC setting all together if I new that would make the system stable. But considering its still doing the "double start" even in failsafe mode, im afraid if i start working my system will crash.
So I am begging anybody for any advice or help they could provide. I will provide my system info below. If anybody can guide me as to what settings I should set in BIOS i would appreciate it. Or perhaps there’s a BIOS update that I should use now that I have a cooler and not a heat sink? If you need any more information from me, just ask. I will be monitoring this thread all day, as I desperately need help.
MY SYSTEM:
Intel 980X chip running Win 7 64bit (with MSI BigBang xPower MB installed in my old Dell XPS 730X)
(1) SATA II WD 3gb Hard Drive @ 1.5TB
(2) OCZ SATA II SSD drives @120GB: http://www.newegg.com/Product/Product.aspx?Item=N82E16820227543
(2) Hitachi 6gb SATA III drives @2TB: http://www.newegg.com/Product/Product.aspx?Item=N82E16822145473
3 DVD/CD/BLUERAY DRIVES:
1 SATA DVD DRIVE
1 SATA BlueRay Drive
1 SATA CD Drive
(So 8 SATA Devices Total)
24GIGs of this ram: http://www.newegg.com/Product/Product.aspx?Item=N82E16820145321
1 NVida Geforce GTX 470
1 Soundblaster X-Fi Titanum Card
New Addition Water Cooler: http://www.newegg.com/Product/Product.aspx?Item=N82E16835181010&nm_mc=OTC-Froogle&cm_mmc=OTC-Froogle-_-Water+Cooling-_-Corsair-_-35181010

PROBLEM: My OC BIOS setting wont load. Even on failsafe i get the "double start". I want to get back to my OC (stable) settings.
UPDATE: Since I posted somebody messaged me mentioned I should have "reset the CMOS" after I installed the new cooler. So I did that, and now they system starts fine without the "double start". I am able to load one of my saved OC settings now as well (but any others causes a failure).
NEW QUESTIONS:
1. Since I reset the CMOS and now the system is starting fine on my last OC settings, is it safe to assume the sytem is stable for now?
2. I never made any power changes or BIOS changes after I installed the new cooler. Should I have?
3. After I reset the CMOS was I soupposed to reinstall the drivers from the MSI disk again? I did not, and the system seems to be fine, but I thought I was soupposed to do that after a CMOS reset.
4. Is there a new BIOS version for my setup that may be better now? Im currently on v1.5
Here is a screenshot from CPUZ of the system information currently. This is with it booting normally after my CMOS reboot. I just figured id post it incase it helps with any of my questions. Thanks so much for helping guys!

[URGENT HELP NEEDED] Premiere Pro CS6 failed rendering

Hello!
I`ll try to make this quick because I need help asap. I`ve been starting to make YouTube gaming videos 3 weeks ago and my channel is growing up pretty fast. I promised I would make a video everyday but it`s been a full week since I couldn`t upload because I was busy and when I tried to render it failed.
Anyway here`s how it goes.I`ve recorded with fraps some gameplay footage with the resolution of 1360x706. One of my friends reccommanded me Adobe Premiere Pro for editing so I`m using the trial version of CS6. I create a new project and choose a format of 720 25 (cant really remember the exact name). I then import my recorded files and when I place them in the sequence it tells me the resolution is different and asks me if I want to change the sequence settings according to the files. Usually, I ignore it and when I export the Media I just tick the option: "Scale to Fill" and that usually works just fine, quality HD on YT...
But this week it has driven me crazy, I really don`t want to explain how much stress and dissapointment this has caused to me because I think I`ll end up raging...I`ll just tell you I`ve been trying for a couple of days more than 7 time to render the project(each time it takes about an hour and a bit more, so let`s just call it 7 hours wasted). The problem actually is that when I check the output file after exporting the media, the file size is ONLY 24 bytes!!! Other times the file size gets to like half of the one that should be or less, but mainly the render even so takes up a normal length of time of processing but in the end the file is only 24 bytes..Thing is I don`t encounter any error whatsoever...
I really need some urgent help!
Thanks!

1st, some FRAPS information
These are for Premiere Elements, but may help with PPro
Fraps & Elements http://forums.adobe.com/thread/871095
-and more Elements http://forums.adobe.com/thread/943772
-and yet more Elements http://forums.adobe.com/thread/967201
2nd, it is REALLY better to have your project sequence match your video
Please NOTE that the PPro CS6 screen may look a bit different (I use CS5)
For CS5 and later, the easy way to insure that your video and your project match
See 2nd post for picture of NEW ITEM process http://forums.adobe.com/thread/872666
-and a FAQ on sequence setting http://forums.adobe.com/message/3804341

URGENT HELP NEEDED!!! (Almost a matter of life and death)

Well, it's more of a matter of failing a course or not...
Anyway, my Java professor gave us some labs to do. I know Java front and back, at least, whatever version I learned a few years back. This is my first tenure with the Scanner object, and it's messing me up.
I'm using Eclipse for my project. I have three files in the source folder, ABC_Manufacturing.java, mseast.dat and mswest.dat. Now, when I try to instanciate a new Scanner object, it won't find the files:
Scanner east = new Scanner(new FileReader("mseast.dat"));
Scanner west = new Scanner(new File("mswest.dat"));
I'm trying two seperate ways to do this. Neither are working, this is the error I get:
Exception in thread "main" java.lang.Error: Unresolved compilation problems:
     Unhandled exception type FileNotFoundException
     Unhandled exception type FileNotFoundException
     at ABC_Manufacturing.main(ABC_Manufacturing.java:38)
Now, I added these files OVER and OVER again. I added them. I created new files and pasted the contents in there. I used .txt files. All the same error. It's like it just won't take the time out to look for the files that are RIGHT IN THE DAMN PROJECT! Then I tried using a complete path, using C:\Java\whatever. SAME ERROR!!!!
Please, I need urgent help. This is due tomorrow at noon, and I have no idea what to do at this point. I can't really continue, because at this point its just looking at what prints out and formatting it, and I don't want to do that without testing to see if my code to convert the file data into arrays work. You dig? Thanks for any and all help, and I'm going to kill my professor...she spent a week going over parallel arrays but did nothing to show us how to import files into projects or use the scanner class. Also it doesn't help that at uni we have to use emacs, which I don't use at home.

d00erino wrote:
This is the the main class, so far:
public static void main(String[] args)throws IOException
          Scanner west = new Scanner(new File("mswest.dat"));
          int [] eastParts = new int[13];
          int [] eastQuant = new int[13];
          int [] westParts = new int[17];
          int [] westQuant = new int[17];
          System.out.print(west.nextInt());
And I didn't ignore that one guy (sorry, don't remember your username) I tried you and the other guy's responce. Both didn't work. I dunno how to get around errors. Figures, you don't learn that in the course but she'll spend a week on parallel arrays...Ok, well that can't possibly be complaining with the same error message you got before, so now you need to be (more) specific about what "didn't work" means.

URGENT HELP NEEDED!!! iOS8 behaviour!

We have 2 iPhones (6 & 5s) and an iPad using the same Apple ID. Both are running iOS8.
When someone calls either of the iPhones BOTH iPHONES RING!!!!
Yes, you read right, the same incoming call appears on BOTH iPhones at the same time.
This is obviously totally unacceptable not to mention useless.
Obviously both iPhones use the same account so that iCal & Contacts can be shared but sharing phone calls?
Really, I need some urgent help with this bug!!!!

Hi RexRox,
Based on your description, it sounds like you may have Continuity enabled, a feature in iOS 8 that allows you to take calls across more than one device (generally aimed at a single person with multiple devices on the same account). You may find the following article helpful, especially the following portion:
Turn off iPhone cellular calls
To turn off iPhone Cellular Calls on a device, go to Settings > FaceTime and turn off iPhone Cellular Calls.
Connect your iPhone, iPad, and iPod touch using Continuity
Regards,
- Brenden

****URGENT HELP NEEDED**** unable to print on metalic silver paper

I am in DESPERATE need of help.
I am trying to print on silver metalic paper using my Photomart C3180, but it wont print. It will printon white paper but not this stuff. I need urgent help as I am trying to make my own wedding invitations that i have to post out at the end of the month.
ANY help would be so greatfully received.
Thank ou
Kate

plz try to download the following set of drivers from the link below :::\
http://gimp-print.sourceforge.net/MacOSX.php3
This is a new set of default drivers and mayhelp u in resolving the issue.
Plz do run disk first aid after installing the driver....might suggest even before installaing.
Thanx !! for trying.

Urgent Help Needed: ATI Graphics Card install

Hello All.... I am in need of some urgent help..
I am trying to install a new graphics card - the ATI Radeon 9600 SE. I currently have a Voodoo3 card. I followed all of the instructions step by step, but when I plug the monitor to the Radeon card and boot up, I do not get any display. I have tried everything I can think of, and yet - I am sure the card is secured in place and the monitor is plug into the card.
Can anyone help me on this one.. ATI's support is, well - lacking..
Here is some info on my pc:
MCI motherboard
AMD Athlon(tm) XP 2000+ 1.7 GHz
768 MB
AMIINT - 10 Version 1.00, 07/10/02
Could the problem be with switching from a regular PCI card to an AGP card???

Quote
Originally posted by southmike
okay i'll bite what are omega drivers,
how are they different from cat4.2 drivers
i was suprised that the voodoo 3 would work in a AMD64 mobo...
whoops....just read the rest of the post :lol:
BTW is there an external power connector that needs to be plugged in?

Urgent help needed... PL/SQL Insert statement

Hi...
I need some urgent help on this project. I have a 2 column table with values that need to be inserted into another existing table which has a sequence.
This is the 2 column table:
FUND YEAR
29587 05
29587 07
Existing table:
Name Null? Type
LIST_ID NOT NULL NUMBER(6) -- This is a sequence
WEB_USER_ID NOT NULL VARCHAR2(10)
RESOURCE_TYPE NOT NULL VARCHAR2(8)
LIST_TYPE NOT NULL VARCHAR2(10)
LIST_NAME NOT NULL VARCHAR2(50)
LIST_CODE_1 NOT NULL VARCHAR2(6) -- FUND from table above
LIST_CODE_2 NOT NULL VARCHAR2(6) -- YEAR from table above
LIST_CODE_3 NOT NULL VARCHAR2(6)
LAST_UPDATED_DT NOT NULL DATE
LAST_UPDATED_BY NOT NULL VARCHAR2(10)
LIST_CODE_4 NOT NULL VARCHAR2(20)
The columns from table 1 (FUND, YEAR) correspond to columns (LIST_CODE_1, LIST_CODE_2) in table 2. The column LIST_ID is a sequence. I can put in sysdate for LAST_UPDATED_DT and my initials SN for LAST_UPDATED_BY. This is going to be for 2 unique WEB_USER_IDs which would be in the WHERE clause. I will be inserting 2200 rows for each id. A single insert statement would look like this -
INSERT INTO EXISTING_TBL (list_id,web_user_id,resource_type,list_type,list_name,list_code_1,list_code_2,list_code_3,list_code_4,last_updated_dt,last_updated_by) VALUES ('470027','WEBUSER','GL','FUNDFYF',' FUND BALANCE SUM','12010','01',' ',' ',{ts '2010-5-19 10:16:9'},'SN')
How would I do this to insert the 2200 values from my 2 column table to the existing table?
All help is greatly appreciated!!
SN

Hello ,
I think this will work
INSERT INTO TABLE2
     LIST_ID,
     WEB_USER_ID,
     RESOURCE_TYPE,
     LIST_TYPE,
     LIST_NAME,
     LIST_CODE_1,
     LIST_CODE_2,
     LIST_CODE_3,
     LIST_CODE_4,
     LAST_UPDATED_DT,
     LAST_UPDATED_BY
SELECT
     SEQ.NEXTVAL,
     FUND,
     YEAR,
     <VALUE FOR RESOURCE_TYPE>,
     <VALUE FOR LIST_TYPE>,
     <VALUE FOR LIST_NAME>,
     <VALUE FOR LIST_CODE_1>,
     <VALUE FOR LIST_CODE_2>,
     <VALUE FOR LIST_CODE_3>,
     <VALUE FOR LIST_CODE_4>,
     SYSDATE,
     'SN'
FROM
     TABLE1
REGARDS
Rahul Sharma

Urgent help needed for XML Tags using XMLForest()

Folks
I need some urgent help regarding getting use defined tag in your
XML output.
For this I am using XMLElement and XMLForest which seems to work fine
when used at the SQL prompt but when used in a procedure throws and error
SQL> Select SYS_XMLAGG(XMLElement("SDI",
                                   XMLForest(sdi_num)))
     From sdi
     where sdi_num = 22261;- WORKS FINE
But when used in a procedure,doesnt seem to work
Declare
    queryCtx DBMS_XMLQuery.ctxType;
    v_xml     VARCHAR2(32767);
    v_xmlClob CLOB;
    BEGIN
    v_xml:='Select SYS_XMLAGG(XMLElement("SDI",
                                         XMLFOREST(sdi_num)))
    From sdi
    where sdi_num = 22261';
    queryCtx :=DBMS_XMLQuery.newContext(v_xml);
    v_xmlClob :=DBMS_XMLQuery.getXML(queryCtx);
    display_xml(v_xmlClob);
End;
CREATE OR REPLACE PROCEDURE display_xml(result IN OUT NOCOPY CLOB)
AS
     xmlstr varchar2(32767);
     line varchar2(2000);
BEGIN
     xmlstr:=dbms_lob.SUBSTR(result,32767);
     LOOP
     EXIT WHEN xmlstr is null;
     line :=substr(xmlstr,1,instr(xmlstr,chr(10))-1);
     dbms_output.put_line('.'||line);
     xmlstr := substr(xmlstr,instr(xmlstr,chr(10))+1);
     END LOOP;
end;
SQL> /
.<?xml version = '1.0'?>
.<ERROR>oracle.xml.sql.OracleXMLSQLException: Character ')' is not allowed in an
XML tag name.</ERROR>
PL/SQL procedure successfully completed.
SQL>HELP is appreciated as to where I am going wrong?

Hi,
if you want to transform something to something else, you should declare, what is your source.
I would prefer to use plain XSL-Transformations, because you have a lot more options to transform your source and you can even better determine, how your output should looks like.
Kind regards,
Hendrik

Urgent help needed!! Layout table and Draw layout cell dissapeared.

I need some urgent help. I'm using CS3 but for a while my
Layout Table and Draw Layout Cell icons appear greyed and can't use
them at all. Is there any kind soul out there who knows how to fix
this? I'm going nuts trying all the possible options but none seem
to work.
Help please!!!!!!

> How would you about designing a page without using html?
You don't. But I don't recall suggesting that you not use
HTML. I just
suggested that you use best-practice HTML, no? Or maybe you
meant to ask
how you would go about building your site without learning
HTML? In that
case, I think you are outta luck. Using DW without knowing
HTML is a very
punishing experience, I'm afraid.
> PS: A virtual box of 12 bottles of Moet Chandon is
already on your way!!
I'd prefer Cristal, please.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"Untersberg" <[email protected]> wrote in
message
news:g4tj9a$m5o$[email protected]..
> Ahhhhhh!!!!! They came up!!!! They came up again!!
> I was on standard mode. Now going back to your
suggestion, which I really
> appreciate. How would you about designing a page without
using html? I'm
> just
> redesigning my website at the moment and need it to get
going urgently,
> hence
> the reluctance to start learning HTML at the moment.
I'll do after but I
> need
> to get this up and running fairly quickly.
>
> Cheers.
>
> PS: A virtual box of 12 bottles of Moet Chandon is
already on your way!!
>

Urgent help needed to get this home page up!

Hi,
I need urgent help with this and it is driving me crazy. For
some reason my animation starts at its fastest and won't stop until
you click the area then it works properly. I have no clue why it is
doing this and only seems to do it on a PC browser not on a Mac.
Can anyone help please!!!!!
Link to sample:
http://www.totalamber.com/test.html
Link to fla:
http://www.totalamber.com/flash/homepage.fla
Thanks so much for anyone who can help or tries to help me.
Neil
Ps this is urgent and i can't find a solution by searching on
here

Thanks to anyone who has looked at this but i have found the
answer.
It is due to what many of the users on here will already know
and can be explained in this link:
http://blog.deconcept.com/swfobject/
I had forgot about the legal patent going on with microsoft!
Hope it helps anyone else as bad as i am.
Neil

Sqlplus SPOOL broken. Urgent help.

Similar Messages

Maybe you are looking for