Sqlplus throwing ORA-12560 error while tring to login

Gurus I am having logon issue when I try to logon to oracle via sqlplus. I find the same error when I use impdp or expdp utilities from command line. The error I am getting is this "ORA-12560: TNS:protocol adapter error"
BTW I am using oracle 10.2.0 on Windows XP and Windows 2003 machine and in the past I was able to run impdp and expdp utilities successfully on these machines.
I double check every thing, and I have the proper tnsnames.ora and sqlnet.ora file on my network admin directories on both machines. I also check that all the required services e.g console, database service, TNSListenerService, isqlPlus service etc is running properly too. Besides this I don't have any problem logging in with EM or Oracle sqldeveloper.
Can some one please help and shed some light on this issue.
Regards,
RJ.

Gurus I just would like to add one more point here; is it possible that this issue can be caused by symantec antivirus services installed on these machines recenlty. The reason I am mentioning it is that I have tested every thing on another machine where we don't have symantec installed and every thing is behaving as expected.
To make thing more confusing even when I disable and stop all the symantec services on the machines where I am having this issue don't make any difference.
Regards,
RJ.

Similar Messages

ISql*Plus works well, but sqlplus throws ORA-12560. Why?

I installed Oracle DB 10.2.0.1 on Windows XP. After the installation, everything works like clockwork. ... well, until I installed Oracle Application server 10.1.2.0.2.
For the most part, it still works fine. But now, whenever I run sqlplus from command line, I get ORA-12560: TNS:protocol adapter error. I can still connect using the same login from iSql*Plus without any problem. Why?
Now I'm supposed to cd into a directory, fire off sqlplus and run a sql script. How do I do this in iSql*Plus?
Any help? Thanks,
-M

Thanks for the replies. I got the idea. I need to set
those variables myself, although I personally think
the installer should take care of that during
installation.
Now, out of curiosity, why did iSql*Plus never have
the problem even though I didn't have any those
variables set in my environment?No idea why those aren't set automatically, but they aren't, as you found out. :)
iSQL*Plus is a web based service, and I believe it uses JDBC, not straight OCI calls.

Get ORA-12560 error while accessing 11g database

Database version: 11.2.0.1.0
This is a development database running on CentOS. We had setup this database recently and everything has been fine. Today I noticed that when I connect to the database from remote, I get the following error -
ORA-12560: TNS:protocol adapter error
I'm able to get in to the database after logging in directly into the database server via putty. I have stopped & restarted the database, but with no help. I have checked the environment variables (ORACLE_HOME, ORACLE_SID) and they seem to be fine.
Can you please help on what might be the problem here? Is this something to do with some change in the OS firewall setting?
Edited by: museshad on Dec 20, 2012 12:44 PM

lsnrctl status
LSNRCTL for Linux: Version 11.2.0.1.0 - Production on 20-DEC-2012 13:27:55
Copyright (c) 1991, 2009, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC1521)))
STATUS of the LISTENER
Alias                     LISTENER
Version                   TNSLSNR for Linux: Version 11.2.0.1.0 - Production
Start Date                27-AUG-2012 16:50:42
Uptime                    114 days 20 hr. 37 min. 13 sec
Trace Level               off
Security                  ON: Local OS Authentication
SNMP                      OFF
Listener Parameter File   /u01/app/oracle/product/11.2.0/db_1/network/admin/listener.ora
Listener Log File         /u01/app/oracle/diag/tnslsnr/xxxx/listener/alert/log.xml
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=EXTPROC1521)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=xxxx)(PORT=1521)))
Services Summary...
Service "orcl.ENTERPRISENET.ORG" has 1 instance(s).
Instance "orcl", status READY, has 1 handler(s) for this service...
Service "orclXDB.ENTERPRISENET.ORG" has 1 instance(s).
Instance "orcl", status READY, has 1 handler(s) for this service...
The command completed successfully
listener.ora
LISTENER =
(DESCRIPTION_LIST =
    (DESCRIPTION =
      (ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1521))
      (ADDRESS = (PROTOCOL = TCP)(HOST = localhost.localdomain)(PORT = 1521))
ADR_BASE_LISTENER = /u01/app/oracle
tnsnames.ora
ORCL =
(DESCRIPTION =
    (ADDRESS = (PROTOCOL = TCP)(HOST = localhost.localdomain)(PORT = 1521))
    (CONNECT_DATA =
      (SERVER = DEDICATED)
      (SERVICE_NAME = orcl.ENTERPRISENET.ORG)
)

ORA-12560 error while DBbackup.

hi there.
our system 's worked well since it was set up.
but I've got error message after wholie database online + redo log backup last night.
according to DB13 action log it was sucessed only brbackup but something on error brarchive.
this is a error message from detail.
BR0301E SQL error -12560 at location BrDbConnect-2, SQL statement:
'CONNECT /'
ORA-12560: TNS:protocol adapter error
BR0310E Connect to database instance SDP failed
and it worked well next day
i have no idea of it. it will be fine with system? and any idea why it happened?
any regrad will help.

SAP-Release 700
    Operating system..... "Windows NT"
    Release.............. "5.2"
    Hardware type........ "16x AMD64 Level"
    Character length.... 16 Bits
    Pointer length....... 64 Bits
    Database type..... "ORACLE"
    Database version. "OCI_10201_SHARE (10.2.0.2.0) "
    Patch level. 159
    Database............. "ORACLE 9.2.0.., ORACLE 10.1.0.., ORACLE 10.2.0.."
    Operating system..... "Windows NT 5.0, Windows NT 5.1, Windows NT 5.2, Windows

Bug 9953612 : MS ACCESS THROWS ORA-1461 ERROR WHILE UPDATING THROUGH 11.2 ODBC DRIVER

Hello,
i really cant find the patch. I am wrong or is there really no one after years.
Can somebody post the link to the patch if it exists, please.
greetz
Rigoletto

> "UPDATE PRODUCTS SET pPrice = newPrice WHERE pID
= productID"
The newPrice and productID are variables and you need to append them to the SQL string. Also, you need to provide single-quotes around those values.
Your update SQL should look like:
String updateSql = "UPDATE PRODUCTS SET pPrice = '" +newPrice
+"' WHERE pID = '" +productID +"' ";A better way is to make use of PreparedStatement. In that case, the sql string would be:
String updateSql = "UPDATE PRODUCTS SET pPrice = ? WHERE pID = ?"and use setString() in PreparedStatement to set the parameters.

ORA-12560 error in VS2010

I'm getting "ORA-12560 TNS:protocol adapter error" when trying to Add Connection in VS2010 (Server Explorer > Add Connection > Username: hr, Password: hr, Data source name: Local Database). This is sample HR database in Oracle XE 10g.
I'm guessing this could be something related to installation? My installation was like this: Oracle XE 10g which I've been using for couple of weeks. I then installed VS2010 Ultimate x86 followed by ODT with ODAC 11.2. This is on Windows 7 Ultimate x64. I've noticed that ODT is installed in D:\app, while XE is in D:\oraclexe.
I can access my database through APEX interface. Running 'sqlplus' in command line issues same ORA-12560 error. Running 'Run SQL Command Line' from Start > Oracle XE 10g works. This obviously points to wrong configuration / installation, but how to fix it?
Thanks in advance.

913905 wrote:
I can access my database through APEX interface. Running 'sqlplus' in command line issues same ORA-12560 error. Running 'Run SQL Command Line' from Start > Oracle XE 10g works. This obviously points to wrong configuration / installation, but how to fix it? That depends on the type of client connection initiated - local IPC connection (also called a bequeath connection) or a network (TCP) connection.
For a local IPC connection to work, the client driver needs to know the ORACLE_HOME and ORACLE_SID of the local database instance - this is usually set via the environment.
For a TCP connection to work, you need an Oracle Listener running on the Oracle server, the local Oracle database instance to have registered itself with the Listener, and for the client being able to connect to the Listener via TCP.
Oracle Listener is a service on Windows - but the command line program is called lsnrctl and via it one can start/stop the listener and determine its status and registered services. With the Listener running, the local database should automatically register itself with the Listener, unless one manually changed database or Listener parameters.
For TCP connectivity, the usual applies - firewalls must not block TCP access, the client needs to resolve the server hostname into an IP (if hostnames are used), that server IP must be reachable, etc.

Ora-00604 error while taking tkprof of a trace file

Sorry i am giving the full erro but omitting exact table names
Hi ,
I have an error while taking tkprof of a trace file.
I gave the following command ---
tkprof <source.trc> <file.prc> sys=no sort=exeela,fchela,prsela explain= /
error is --
Error in create table of EXPLAIN PLAN table : unix_session_user.prof$paln_table
ORA-00604: error occurred at recursive SQL level 1
ORA-20001: Step-6:DDL
Event Security. You are not permitted to perform the requested structural
changes to PROF (TABLE)
Event triggered : CREATE
ora_login_user
(session_user) : unix_session_user(dummy)
Search : select count(*) from
tabl(dummy table name) where obj_name like '%\%%' escape '\' and obj_type =
'TABLE' and obj_type = 'USER' and ( event_CREATE = 'Y' or status =
'Override')
ORA-06512: at line 162
ORA-06510: PL/SQL: unhandled
user-defined exception
EXPLAIN PLAN option disabled.
i searched for the error and in oracle forum i found a solution .. http://forums.oracle.com/forums/thread.jspa?threadID=844287&tstart=0
but after giving the table option it is giving the same error
tkprof <source.trc> <file.prc> sys=no sort=exeela,fchela,prsela table=old_schema.plan_table explain= /
it again gave the same error.
In both two cases it gives elapsed time results,library cache missing etc but before giving this it throws ORA-00604 error as stated above
then i again correct the tkprof statement ..
tkprof <source.trc> <file.prc> sys=no sort=exeela,fchela,prsela table=new_schema.plan_table explain= /
say this schema name here i used is dummy schema name.
My question is did this error came as we had not sufficient previlages in the old_schema but that previleges we have in new_schema?
My databse version is 9.2.0.4.0
Thanks in advance
Edited by: bp on Feb 3, 2009 11:36 PM
Edited by: bp on Feb 3, 2009 11:40 PM

Please post here full error message, there should be lines with ORA-00604 and then some other ORA as well.
And are there any trace files generated during this error?
And as You can see from error description, probably You will have to contact with Oracle support in order to solve this case:
oerr ora 00604
00604, 00000, "error occurred at recursive SQL level %s"
// *Cause: An error occurred while processing a recursive SQL statement
// (a statement applying to internal dictionary tables).
// *Action: If the situation described in the next error on the stack
// can be corrected, do so; otherwise contact Oracle Support.

ORA-12709: error while loading create database character set

I installed Oracle 8.05 on Linux successfully: was able to login
whith SQLPlus, start and stop the db whith svrmgrl etc.
During this install I chose WE8ISO8859P9 as the database
characterset when prompted.
After that I installed Oracle Application Server 3.02, and now
I'm getting the
ORA-12709: error while loading create database character set
message when I try to start up the database, and the database
won't mount.
Platform is RedHat Linux 5.2.
NLS_LANG set to different settings,
e.g. AMERICAN_AMERICA.WE8ISO8859P9
but without success.
Anyone any clue?
Thanks!
null

Jogchum Reitsma (guest) wrote:
: I installed Oracle 8.05 on Linux successfully: was able to
login
: whith SQLPlus, start and stop the db whith svrmgrl etc.
: During this install I chose WE8ISO8859P9 as the database
: characterset when prompted.
: After that I installed Oracle Application Server 3.02, and now
: I'm getting the
: ORA-12709: error while loading create database character set
: message when I try to start up the database, and the database
: won't mount.
: Platform is RedHat Linux 5.2.
: NLS_LANG set to different settings,
: e.g. AMERICAN_AMERICA.WE8ISO8859P9
: but without success.
: Anyone any clue?
: Thanks!
You can create the database with WE8DEC character set
and to use the WE8ISO8859P9 on the client or even on Linux.
The NLS_LANG setting doesn't effect the database, but the
interface with the database. The same setting can be used in de
windows 95/98/NT registry.
null

ORA-19870: error while restoring backup piece -- file exists in ASM

[oracle@rs1pre92dvdbsa01 ~]$ rman target sys/c9nv9sd9t9f11e@mdm11 auxiliary /
Recovery Manager: Release 11.2.0.1.0 - Production on Fri Oct 29 10:41:38 2010
Copyright (c) 1982, 2009, Oracle and/or its affiliates. All rights reserved.
connected to target database: MDM (DBID=1485385044)
connected to auxiliary database: MDM (not mounted)
RMAN> duplicate target database for standby;
Starting Duplicate Db at 29-OCT-10
using target database control file instead of recovery catalog
allocated channel: ORA_AUX_DISK_1
channel ORA_AUX_DISK_1: SID=13 device type=DISK
contents of Memory Script:
restore clone standby controlfile;
executing Memory Script
Starting restore at 29-OCT-10
using channel ORA_AUX_DISK_1
channel ORA_AUX_DISK_1: starting datafile backup set restore
channel ORA_AUX_DISK_1: restoring control file
channel ORA_AUX_DISK_1: reading from backup piece +MDMDG2/mdm1/autobackup/2010_10_29/s_733654605.283.733654607
channel ORA_AUX_DISK_1: ORA-19870: error while restoring backup piece +MDMDG2/mdm1/autobackup/2010_10_29/s_733654605.283.733654607
ORA-19505: failed to identify file "+MDMDG2/mdm1/autobackup/2010_10_29/s_733654605.283.733654607"
ORA-17503: ksfdopn:2 Failed to open file +MDMDG2/mdm1/autobackup/2010_10_29/s_733654605.283.733654607
ORA-15012: ASM file '+MDMDG2/mdm1/autobackup/2010_10_29/s_733654605.283.733654607' does not exist
failover to previous backup
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of Duplicate Db command at 10/29/2010 10:42:00
RMAN-03015: error occurred in stored script Memory Script
RMAN-06026: some targets not found - aborting restore
RMAN-06024: no backup or copy of the control file found to restore
RMAN>
ASMCMD [+mdmdg2] > cd mdm1
ASMCMD [+mdmdg2/mdm1] > ls
CONTROLFILE/
FLASHBACK/
ONLINELOG/
arch/
autobackup/
ASMCMD [+mdmdg2/mdm1] > cd autobackup
ASMCMD [+mdmdg2/mdm1/autobackup] > ls
2010_10_29/
ASMCMD [+mdmdg2/mdm1/autobackup] > cd 2010_10_29
ASMCMD [+mdmdg2/mdm1/autobackup/2010_10_29] > ls
s_733654605.283.733654607
As seen in asmcmd "s_733654605.283.733654607" file exists in +mdmdg2/mdm1/autobackup/2010_10_29 then why it is complaning that it can't find the file.
and also How to open/view file in asmcmd

[oracle@rs1pre91dvdbaa01 utl]$ sqlplus / as sysasm
SQL*Plus: Release 11.2.0.1.0 Production on Fri Oct 29 13:11:44 2010
Copyright (c) 1982, 2009, Oracle. All rights reserved.
Connected to an idle instance.
SQL> startup;
ORA-01078: failure in processing system parameters
ORA-29701: unable to connect to Cluster Synchronization Service
I have rebooted both the RAC servers and I can't start database?
I was under the impression that Database should be automatically started as part of Clusterware
Please help urgent.

Raising ora-01426 error while truncating table

Hi,
We have a procedure which executes in the following process for few set of tabls
1. disables the constraints
2. truncating the tables
3. enabling the constraints
but after processing for 5 tables, while truncating the error throws
BEGIN <procedure name >; END;
ERROR at line 1:
ORA-01426: numeric overflow
ORA-06512: at "<procedurename> ", line 33
ORA-06512: at line 1
this line 33 point to execute immeidate 'truncate table < table name>
Can i know what would be reason for throwing ' numeric overflow' error while truncating table..
Thanks in advance

user9080289 wrote:
thanks.
My oracle verision is 11gThen you could have the bug described there. Follow the instruction how to workaround (monitoring flush, set stats to low value) or apply the patch #8226471.
Nicolas.

Ora-12560 error with 8.1.7 under win2k

I have installed 8.1.7. on windows 2ooo. The install went
successfully and immediately after the install i could connect
with scott/tiger.
After a short period of time I can no longer connect and receive
the ora-12560 error. The system has not been rebooted or even
touched during this time period. I have removed the database
with dbassist and recreated. Again it works for 5 mins and
stops.
When I look at tsnrctl status all looks great. Under services
the tnslistener is working properly. I can do a tnsping as well.
I just cannot connect to the database.
Please help!
Dan Hoover

I have installed 8.1.7. on windows 2ooo. The install went
successfully and immediately after the install i could connect
with scott/tiger.
After a short period of time I can no longer connect and receive
the ora-12560 error. The system has not been rebooted or even
touched during this time period. I have removed the database
with dbassist and recreated. Again it works for 5 mins and
stops.
When I look at tsnrctl status all looks great. Under services
the tnslistener is working properly. I can do a tnsping as well.
>
I just cannot connect to the database.
Please help!
Dan Hoover An ORA-12560 WinNT is usually an indication that
the OS system/environment is not set up correctly.
You don't need a listener when you connect locallay without alias
name (sqlplus scott/tiger@alias).
Please try the following:
- start cmd box
- set ORACLE_HOME = <your home>
- set ORACLE_SID = <your SID>
- sqlplus scott/tiger
Thomas

ORA-12560 problem while installing 8.1.7

I have a HP Netserver LC2000 with 256MB RAM and Windows 2000 Server with Terminal Services enabled. I downloaded a trial copy of the Oracle 8i3 (8.1.7) database from the OTN website and tried to install it. I have to mention that I tried a TYPICAL install on the machine console, not from a remote terminal client. And I had a problem.
Universal Installer copied all the files and invoked the optional parts configuration. Then it configured network successfully, it configured Apache web server successfully, but it halted for a long while trying to make the starter database and resulted with error. I clicked Retry and again the same.
The I cancelled and the installation finished as if successful, but without the database and its service. When I try svrmgrl from command prompt I get an ORA-12560 error.
When I try to invoke the DBCA (database configuration assistant) by myself it fails to create either a typical or a custom specified database (I suppose it's the same problem).
Anyone has any thoughts on this?
null

When you create the service
and start it, everything should
work just fineActually it doesn't. I uninstalled Terminal Services, and maybe because of that, and maybe because of something else, I managed to create a customized database with the Database Configuration Assistant. So, now the problem is solved partly. When I run
svrgrml
it starts and I can connect to the database.
But if I try to connect from another PC, I can't get through. I get these messages:
ORA-01034: Oracle not available
The help says that SGA was not started, then how am I able to connect local, and also it says to check the next message, which is:
ORA-27101: shared memory realm does not exist
Cause: Unable to locate shared memory realm.
Action: Verify that the realm is accessible.
BUT!!!! This is is located in the help files under Unix messages!!?!?!?! I have installed it under Linux and I know where and how and what to check for SHM parameters. But under Windows2000?!!?
I'm confused.

ORA-12571 error while creating packages from Windows clients

Hello,
We are facing the ORA-12571 error while creating / replacing packages from Windows Clients connected to a 8.1.7.2.0 db on a Solaris server.
However, there are
1. no errors in connecting and creating transactions from a Sql session
2. no errors in creating / replacing unwrapped/wrapped small (few lines) packages
3. no errors in connecting from a Unix session (remote telnet sessions inclusive).
This happens only when creating wrapped/unwrapped packages, source code of which is greater than 500 kb approx.
Can somebody help me resolve this issue. Any Help would be greatly appreciated.
Regards.
Lakshmanan, K

Update: I had unintentionally left my custom tablespace in READONLY state after an earlier experiment with transportable tablespaces. After putting the tablespace back into READ WRITE mode and creating a new template, I was successfully able to create a new db from the template.
I'm still a little curious why this procedure wouldn't work properly with a READONLY tablespace, however.
Ben

Dbms_xmlschema.registerschema, (ORA-31084: error while creating table )..

Hello,
I have some problems with dbms_xmlschema.registerschema
My database is: Oracle Database 11g Enterprise Edition Release 11.2.0.3.0 - 64bit Production
My XSD schema is (SEPA pain.002.001.03.xsd) also available on this url: http://code.google.com/p/leontestbed/source/browse/trunk/bc2/sample/Schema/pain.002.001.03.xsd?r=241
After
begin
   DOK_XML_UTIL.p_vnesi_xsd_blob(401941242); -- store a XSD on file system from blob field
   dbms_xmlschema.registerschema(
    schemaurl => 'http://localhost/TEST1.XSD',
    schemadoc => bfilename('ETAX_LOAD','TEST1.XSD'),
    csid => nls_charset_id('AL32UTF8'));
commit;
end;I get:
ORA-31084: error while creating table "INIS_PROD"."Document2781_TAB" for element "Document"
ORA-02320: failure in creating storage table for nested table column "XMLDATA"."CstmrPmtStsRpt"."OrgnlPmtInfAndSts"
ORA-01792: maximum number of columns in a table or view is 1000
ORA-02310: exceeded maximum number of allowable columns in table
ORA-06512: at "XDB.DBMS_XMLSCHEMA_INT", line 37
ORA-06512: at "XDB.DBMS_XMLSCHEMA", line 65
ORA-06512: at "XDB.DBMS_XMLSCHEMA", line 136
ORA-06512: at line 4
What I'am doing wrong or what is the reason for this error..

Arrgghhh.....
begin
   DOK_XML_UTIL.p_vnesi_xsd_blob(401941242);
   dbms_xmlschema.registerschema(
    schemaurl => 'http://localhost/TEST1.XSD',
    schemadoc => bfilename('ETAX_LOAD','TEST1.XSD'),
    csid => nls_charset_id('AL32UTF8')
    , local => true
, genTypes => false
, genTables => false);
commit;
end;sorry...

Creating database problem with ORA-01519: error while processing file '' ne

Dear all,
I am having rough time with creating database manually. can anyone help me with the following errors.
ALERT LOGFILE:-
Sun May 31 12:00:39 2009
Errors in file d:\oracle\product\10.1.0\admin\oracle5\udump\oracle5_ora_3444.trc:
ORA-01501: CREATE DATABASE failed
ORA-01519: error while processing file '%ORACLE_HOME%\RDBMS\ADMIN\SQL.BSQ' near line 5744
ORA-00604: error occurred at recursive SQL level 1
ORA-01119: error in creating database file 'D:\oracle\product\10.1.0\oradata\ORACLE5 \datafile\undotbs1.dbf'
ORA-27040: file create error, unable to create file
OSD-04002: unable to open file
O/S-Error: (OS 3) The system cannot find the path specified.
Error 1519 happened during db open, shutting down database
USER: terminating instance due to error 1519
Sun May 31 12:00:39 2009
Errors in file d:\oracle\product\10.1.0\admin\oracle5\bdump\oracle5_reco_3416.trc:
ORA-01519: error while processing file '' near line
CREATE DATABASE SCRIPT:-
create database ORACLE5
user sys identified by bala
user system identified by bala
logfile
group 1 ('D:\oracle\product\10.1.0\oradata\ORACLE5\logfile\redo01.log') SIZE 50M,
group 2 ('D:\oracle\product\10.1.0\oradata\ORACLE5\logfile\redo02.log') SIZE 50M,
group 3 ('D:\oracle\product\10.1.0\oradata\ORACLE5\logfile\redo03.log') SIZE 50M
maxlogfiles 5
maxlogmembers 5
maxloghistory 1
maxdatafiles 50
maxinstances 1
datafile 'D:\oracle\product\10.1.0\oradata\ORACLE5\datafile\system01.dbf' size 200m autoextend on maxsize unlimited extent management local
undo tablespace UNDOTBS1 datafile 'D:\oracle\product\10.1.0\oradata\ORACLE5 \datafile\undotbs1.dbf' size 10m autoextend on maxsize unlimited
sysaux datafile 'D:\oracle\product\10.1.0\oradata\ORACLE5\datafile\sysaux01.dbf' size 100m autoextend on maxsize unlimited
default temporary tablespace temp tempfile 'D:\oracle\product\10.1.0\oradata\ORACLE5 \datafile\temp01.dbf' size 10m autoextend on maxsize unlimited
character set US7ASCII
NATIONAL CHARACTER SET AL16UTF16
INIT.ORA FILE:-
# Copyright (c) 1991, 2001, 2002 by Oracle Corporation
# Archive
log_archive_format=ARC%S_%R.%T
# Cache and I/O
db_block_size=8192
db_cache_size=25165824
db_file_multiblock_read_count=16
# Cursors and Library Cache
open_cursors=300
# Database Identification
db_domain=""
db_name=oracle5
# Diagnostics and Statistics
background_dump_dest=D:\oracle\product\10.1.0\admin\oracle5\bdump
core_dump_dest=D:\oracle\product\10.1.0\admin\oracle5\cdump
user_dump_dest=D:\oracle\product\10.1.0\admin\oracle5\udump
# File Configuration
#db_create_file_dest=D:\oracle\product\10.1.0\oradata
db_recovery_file_dest=D:\oracle\product\10.1.0\flash_recovery_area
db_recovery_file_dest_size=2147483648
# Job Queues
job_queue_processes=10
# Miscellaneous
compatible=10.1.0.2.0
# Pools
java_pool_size=50331648
large_pool_size=8388608
shared_pool_size=83886080
# Processes and Sessions
processes=150
# Security and Auditing
remote_login_passwordfile=EXCLUSIVE
# Shared Server
dispatchers="(PROTOCOL=TCP) (SERVICE=oracle5XDB)"
# Sort, Hash Joins, Bitmap Indexes
pga_aggregate_target=25165824
sort_area_size=65536
# System Managed Undo and Rollback Segments
undo_management=AUTO
undo_tablespace=UNDOTBS1
control_files=("D:\ORACLE\PRODUCT\10.1.0\ORADATA\ORACLE5\CONTROLFILE\control01.CTL", "D:\ORACLE\PRODUCT\10.1.0\FLASH_RECOVERY_AREA\ORACLE5\CONTROLFILE\control02.CTL")

Hi,
undo tablespace UNDOTBS1 datafile 'D:\oracle\product\10.1.0\oradata\ORACLE5 \datafile\undotbs1.dbf' size 10m autoextend on maxsize unlimited
After ORACLE5 there is a space character. Typo? Create proper directory or delete this character.
Bartek

Sqlplus throwing ORA-12560 error while tring to login

Similar Messages

Maybe you are looking for