Sqlpuls command is not working at Linux

Hi,
Oracle 11g has been installed successfully at Linux. Please find below output that I got after executing ‘uname –a ‘ command:
Linux <server_name> 2.6.9-89.0.25.ELsmp #1 SMP Mon Apr 19 06:05:15 EDT 2010 i686 athlon i386 GNU/Linux
$ORACLE_HOME is also set properly.
But when I am executing sqlpuls command, it is getting hung, not asking for user id & password prompt
$ sqlplus
$ sqlplus / as sysdba
Could you please throw some lights on this?
Regards,
Amitava

Check if the PATH is set properly. In the documentation, you can see how to set it.
If it still doesn't work, try running it directly from its directory:
1 cd /usr/lib/oracle/xe/app/oracle/product/10.2.0/server/bin
2 ./sqlplus

Similar Messages

Host command is not working on linux

Hi
I m using linux for application server n windows for client. I need to create folder from client machine by cliking a button of forms10g runtime.HOST command is not working which was working fine in windows.
Any help is appriciateable.
kazi mokarem

Hi
I had the same issue on linux a few weeks back. What tuned out was, when you install the Oracle app svr it does not include the system paths by default.
The path where mkdir is located may not be visible to the app.
Try to hardcode the path for mkdir as /bin/mkdir .... and seee if that works.
If the above statement works then add that path in the paths variable in default.env file located in $ORACLE_HOME/forms/server directory
HTH
Arvind

Why my RMI is not Working in Linux???

Hiii how ru?
I am Rahul here
Well I have a problem that my RMI in not working on Linux.. so can u tell me the solution to my problem???
When i am typing following command i am getting exception as RmiNotBoundException
java -Djava.security.policy=my.policy ChaClient&
however my Server is Starting normally but client is not connection to server.
so please tell me the solution to this problem
U can contact me at
[email protected]
[email protected]
Thank u Very much...

i ran into the same issue dealing with RMI and Linux. My issue was the the stub that linux was giving you gave in the host field the ip number of "127.0.0.1" which tried to make the client connect to itself. this is how i got around it:
java -Djava.rmi.server.hostname=<ip that other clients will connect to>
so, for instance, if on a client you connect to the server with an IP of 10.5.0.1, then when starting up the java vm, you start it
java -Djava.rmi.server.hostname=10.5.0.1
hopefully that helps

Groupadd command is not working

I am trying to add a group called dba to install oracle 9iR2 on Redhat linux 9.
but, it keep giving me a error says:
bash:command groupadd is not found
It seems other unix commands are working fine except gropudadd and useradd command.
Can anyone tell me why the groupadd command is not working? and what should i do to fix this problem?
Thanks
Jung

here you have all steps that you have to carry out to install Oracle on Linux ( In this case this document is based on Oracle9i on RH9 )
http://linux.oreillynet.com/lpt/a/4141
Installing Oracle 9iR2 on Red Hat 9
by Roko Roic
09/04/2003
There are an ever-growing number of reasons to run the Oracle database server on a Linux-based OS. The price factor is obvious, as OS licenses can really boost the total price of your multiple workstation or clustered (RAC) server installation. Then there's the stability factor, the possibility of total remote administration, the availability of platform source code, speed, flexible filesystem, the strong Unix legacy .... Heck, even Oracle itself runs its business on what they like to call Unbreakable Linux.
Red Hat's latest and greatest Linux distribution release comes with quite a few improvements, many of which are targeted at the needs of the workstation user. As new hardware owners become early adopters, this OS will surely dominate Linux developers' workstations in the months to come. Support for cutting-edge hardware and software technologies, easier maintenance via graphical configuration tools, polished office and productivity applications, a unified interface, development tools, and, of course, Red Hat's reputation will also make it the OS of choice for many Oracle developers. Unfortunately, unless the current version was certified, Oracle installation hardly ever ran smoothly on Red Hat Linux. Still, where there's a will, there's always a way. With a little help from this article, you will have your Oracle 9iR2 server running in no time on your new Red Hat 9 box. Let us begin.
Adding Users and Groups
First, you will need to create the Oracle installation and users and groups. Oracle installation needs two Unix user groups and one runtime Oracle user.
Log in as root and issue the following commands in a terminal:
[root@miniroko]# groupadd dba
[root@miniroko]# groupadd oinstall
[root@miniroko]# useradd -g oinstall -G dba oracle
[root@miniroko]# passwd oracle
The last command will prompt you to enter the password for your oracle user. Make sure you remember it, because you will probably need it as we go along.
Joel P�rez

Wireless not working in linux, but works fine in windows vista

Hello!
I have installed Unbreakable Enterprise Linux 4 in a dual boot config. with Window Vista on a Compaq Presario laptop. After install completed I found that my on board Broadcom Wireless Adapter (Dell 1390 Mini PC card) was not recognized. I have tried installing NDISwrapper versions 1.48 and later 1.47 (after uninstalling 1.48) because everytime I got to the "modprobe ndiswrapper" received a fatal error about an unknown symbol or parameter, and on install I also encountered a "CONFIG_4KSTACKS" error as well. The good part is the light on my laptop for the wireless adapter finally came on and the driver (bcmwl5.inf) appears to be installed and the wireless adapter identified as being present, but it still doesn't show up in the network manager gui interface. So I am out of ideas if any one can give me a suggestion for a solution I would appreciate it.

Hi there,,,,,
I have Oracle Enterprise Linux 5 installed and Intel wifi 5100 card installed on my laptop. Wireless card does not work in Linux it works fine with Vista, I have dual boot. I have downloaded and installed the microcode for the wireless card for Linux,,,it is now active but it does not take ip address from dhcp and nor does it connect when i supply manual ip. it does not even scan for any wireless network. I have WEP enabled on my wireless network. It just says disconnected.....
Please help me.....i have been trying to get this thing work for 3 weeks.
thanks.

External command is not working in File Receiver Adapter

Hi,
   I have tried to copy the file which is mentioned in my File Adapter (Receiver) to 3 different folders thru OS command. The purpose is to save time. I have created one CC for Source(File) and one CC for target(File). After the target file is created, I want to copy this file in 3 folders. For this I have written one batch file in my system.
File Name: copy1.bat
@ECHO OFF
COPY %1 C:\TEST1\arch_t1
COPY %1 C:\TEST2\arch_t2
COPY %1 C:\TEST3\arch_t3
DEL %1
The command which I entered in the Receiver CC (File Adatper is)
Run Operating System Command After Message Processing
Command Line: C:\FILES\copy1.bat %F %f
Timeout(secs): 60
Terminate Program After Timeout - Check box is selected.
But, this external command is not working. (because the target files are not created in those directories C:\TEST1, C:\TEST2, C:\TEST3)
   I did this scenario by refering the Michael'w weblog:
/people/michal.krawczyk2/blog/2007/02/08/xipi-command-line-sample-functions
   In this blog, he has also given how to troubleshoot external command. I tried this also. It is not working.
    I use Windows XP OS. XI 3.0 SP 18.
   Friends, Could you kindly tell why this external command is not working? What could be the problem?
Thanks in advance.
Kind Regards,
Jeg P.

Hi, Jeg.
As the note says, please check the java Runtime.exec behavior
with the proper user.
If in doubt, check if the command can be successfully run through
the Java Runtime.exec(...) API. Also note that the command is run
as user "<sid>adm" (Unix) / "SAPService<SID>" (Windows).
So, Could you check the following(very dirty one!) Java in your
XI server and check if it works? For simulating %F, create a test
file C:\FILES\test.txt whatever the content is.
import java.util.*;
import java.io.*;
public class ExecJava {
public static void main(String args[]) {
    try {
      Runtime rt = Runtime.getRuntime();
      Process proc = rt.exec("C:/FILES/copy1.bat C:
FILES
test.txt");
    } catch (Exception e) {
      e.printStackTrace();
Good Luck.
Sejoon

Why export audio to movie command not visible and detect cuts command is not working in 64bit mode?

Does anyone know why export to audio disappear from menu in 64bit mode?
Why detect cuts command is not working well in 64 bit mode?
I tested on several machines (brand-new iMac, brand-new MacPro with 10.8 OS, MacPro with 10.6.8),and everythig wotks in 32 bit mode. As I switch to 64 bit mode detect cuts only put one marker at the begening of film.
I also noticed that Firewire output option in 64bit mode is not avaible.
Is there a certain film format that I have to use to make it work? I tried DV PAL, but I had ther same result.
Thanks a lot.

Hi
Those functions are not available when Logic is running in 64bit mode
http://support.apple.com/kb/TS3171
CCT

6120 classic:My voice commands do not work

Please help.
Don’t know if I'm just being stupid or there is something not right with my 6120c.
My voice commands do not work.
If I press the button for a voice command, it says that there are no voice tags saved.
If I go into the voice command application (Which should create the voice tags on opening), I cant playback the voice tags, its give a 'voice system error' error message.
Is there something that is not set up properly? In the voice command settings, the synthesizer is 'on'?
Also, I don’t have voice tags on my contacts??
I read somewhere that this is a firmware problem and the phone should be taken back to nokia. Is this the case?
Somebody please help.

I formated my nokia n6120 using the code *#7370#. It deletes !everything! (settings, aplications...), but I have no voice sytem error now.

Java command still not working - please help

i have installed jdk1.6.0_05. The javac command works fine but the java command does not work at all. even when i try java HelloWorld i receive this exception message
Exception in thread "main" java.lang.NoClassDefFoundError: HelloWorld
Caused by: java.lang.ClassNotFoundException: HelloWorld
at java.net.URLClassLoader$1.run(Unknown Source)
at java.security.AccessController.doPrivileged(Native Method)
at java.net.URLClassLoader.findClass(Unknown Source)
at java.lang.ClassLoader.loadClass(Unknown Source)
at sun.misc.Launcher$AppClassLoader.loadClass(Unknown Source)
at java.lang.ClassLoader.loadClass(Unknown Source)
at java.lang.ClassLoader.loadClassInternal(Unknown Source)
please help (you to SUN)!!

bart@kerberos:~$ javac -help
Usage: javac <options> <source files>
where possible options include:
-g                         Generate all debugging info
-g:none                    Generate no debugging info
-g:{lines,vars,source}     Generate only some debugging info
-nowarn                    Generate no warnings
-verbose                   Output messages about what the compiler is doing
-deprecation               Output source locations where deprecated APIs are used
-classpath <path>          Specify where to find user class files and annotation processors
-cp <path>                 Specify where to find user class files and annotation processors
-sourcepath <path>         Specify where to find input source files
-bootclasspath <path>      Override location of bootstrap class files
-extdirs <dirs>            Override location of installed extensions
-endorseddirs <dirs>       Override location of endorsed standards path
-proc:{none,only}          Control whether annotation processing and/or compilation is done.
-processor <class1>[,<class2>,<class3>...]Names of the annotation processors to run; bypasses default discovery process
-processorpath <path>      Specify where to find annotation processors
-d <directory>             Specify where to place generated class files
-s <directory>             Specify where to place generated source files
-implicit:{none,class}     Specify whether or not to generate class files for implicitly referenced files
-encoding <encoding>       Specify character encoding used by source files
-source <release>          Provide source compatibility with specified release
-target <release>          Generate class files for specific VM version
-version                   Version information
-help                      Print a synopsis of standard options
-Akey[=value]              Options to pass to annotation processors
-X                         Print a synopsis of nonstandard options
-J<flag>                   Pass <flag> directly to the runtime systemSee the bold part.
More information: [http://java.sun.com/docs/books/tutorial/java/package/managingfiles.html]

Command S not working in Dreamweaver CS6

Command S not working in Dreamweaver CS6

Every time I've run into an issue like this, clearing the cache file has repaired it...
http://forums.adobe.com/thread/494811
As long as it's not a system wide issue that is.

Webutil not working in linux

Hi all,
i have insert image using webutil(oracle forms 10g) to database in windows o.s. it was successful.
but when i have tried it in solaries o.s. .
It is not working in linux how to do it in solaries o.s.
when i am clicking on the browse button it is showing pl/sql error how to solve it.
please guide me ..

HI Anderas,
i am using using a demo form of webutil which is available on internet i.e WEBUTIL_DOCS.fmb
which is working fine on windows sp2(when i am clicking on the browse button)
but it is not working on linux when i am clicking on the browse button it is showing pl/sql error.
code in browse butrton
Declare
     LC$Fichier Varchar2(128 ) ;
Begin
LC$Fichier := PKG_FICHIERS.Selection ;
If LC$Fichier is not null Then
:TRANSFERTS.FIC_SOURCE := LC$Fichier ;
End if ;
End ;
and the package is
package specification
==================
PACKAGE PKG_FICHIERS IS
-- Sélection d'un fichier --
FUNCTION Selection ( PC$Filtre IN Varchar2 DEFAULT '|All files|*.*|' ) RETURN VARCHAR2 ;
END;
package body
=============
PACKAGE BODY PKG_FICHIERS IS
-- Sélection d'un fichier --
FUNCTION Selection ( PC$Filtre IN Varchar2 DEFAULT '|All files|*.*|' )RETURN VARCHAR2
IS
LC$Path Varchar2(128) ;
LC$Fichier Varchar2(256) ;
LC$Filtre          Varchar2(100) := PC$Filtre ;
Begin
     -- Répertoire temporaire --
     LC$Path := CLIENT_WIN_API_ENVIRONMENT.Get_Temp_Directory ;
LC$Fichier := WEBUTIL_FILE.FILE_OPEN_DIALOG
     LC$Path,
     LC$Filtre,
     'Select a file to upload'
Return LC$Fichier ;
END Selection ;
END;
please reply..

Shift+command+b not working for bold

I just updated to cs6 and my "bold" key command is not working. (shift+command+b on mac) I am using a font that has BOLD. I can select bold from the character palette and it works fine but the key command will not work. I checked my key command list and is there by default. It should work. It worked fine on cs5 for me. I even tried holding the fn key but no dice. Any ideas? I have to bold many many items so I can not possibly use the character palette....thanks.

"Nope" the first word of my response, was to your question. It means No. Meaning "No I did not copy a custom set". I am using default set.
I wonder if some other app has taken that kb shortcut. Nothing happens when I press it though....and I wouldnt know how to find out.
edit - problem solved. Even though the font says that it has a bold face I guess that it does not. Bold still works fine for other fonts. Sorry for your time.
Message was edited by: Emperor1212 - Problem solved.

Some commands are not working nor in illustrator nor photoshop, any advice better than Adobe?

Illustrator is not fuctioning at 100%, some commands do not work ( eg - command open, nor place etc ) and same with photoshop....
Any advice

pcmyhre,
You may try the list, possibly starting with item 7) in 5), which is a list of the usual suspects, which may disturb and confuse Illy so she fails to do even simple things.
The following is a general list of things you may try when the issue is not in a specific file, and when it is not caused by issues with opening a file from external media, see below. You may have tried/done some of them already; 1) and 2) are the easy ones for temporary strangenesses, and 3) and 4) are specifically aimed at possibly corrupt preferences); 5) is a list in itself, and 6) is the last resort.
If possible/applicable, you should save current artwork first, of course.
1) Close down Illy and open again;
2) Restart the computer (you may do that up to at least 5 times);
3) Close down Illy and press Ctrl+Alt+Shift/Cmd+Option+Shift during startup (easy but irreversible);
4) Move the folder (follow the link with that name) with Illy closed (more tedious but also more thorough and reversible);
5) Look through and try out the relevant among the Other options (follow the link with that name, Item 7) is a list of usual suspects among other applications that may disturb and confuse Illy, Item 15) applies to CC, CS6, and maybe CS5);
Even more seriously, you may:
6) Uninstall, run the Cleaner Tool (if you have CS3/CS4/CS5/CS6/CC), and reinstall.
http://www.adobe.com/support/contact/cscleanertool.html
External media: It is always recommended here to open/save from/to own hard disk, and to copy from/to networks and removable media. You may be lucky (for a while), but the chances of file corruption and other unpleasantnesses are immensely greater when you use anything but the harddisk, and it is better to be safe than sorry.
In addition to the (far greater) risk of file corruption, some issues are mentioned here:
http://helpx.adobe.com/illustrator/kb/illustrator-support-networks-removable-media.html

Ctrl-T command do not work in website with flash

Ctrl-T command do not work in website with flash
== URL of affected sites ==
http://

If the Flash object has focus then key presses are processed by that plugin.
In such cases you need to click outside that plugin (e.g. the menu bar if you can't click on the website) to make the keyboard work.

KeyListener not working in Linux

Hello guys, I'm having a weird problem I was hoping I could get resolved.
I finished a Pong applet for my Java class, and it works just fine under Windows and on my Mac.
But when I run it under Linux, the Applet doesn't work correctly.
The applet draws, and my timer works, but my KeyListener does not work.
I believe all of my Java files are updated properly.
But I do not understand why KeyListener does not work under Linux, but it does in Windows.
I then made a very basic applet just to test my KeyListener, and it still does not work.
This is how I was taught to do KeyListeners, but if I'm doing something wrong, please help me out!
here is the basic program code:
import java.awt.*;
import java.awt.event.*;
import javax.swing.*;
public class Test extends JApplet implements KeyListener
int x = 0;
int y = 250;
public void init()
addKeyListener(this);
public void paint(Graphics g)
g.setColor(Color.white);
g.fillRect(0,0,500,500);
g.setColor(Color.black);
g.fillRect(x,y,50,50);
public void keyPressed(KeyEvent event)
int keyCode = event.getKeyCode();
if(keyCode == KeyEvent.VK_RIGHT)
x += 10;
public void keyReleased(KeyEvent event)
public void keyTyped(KeyEvent event)

What if don't use a KeyListener but instead use key binding? For instance,
import java.awt.*;
import java.awt.event.*;
import javax.swing.*;
@SuppressWarnings("serial")
public class Test2 extends JPanel {
private static final int DELTA_X = 10;
private static final int DELTA_Y = DELTA_X;
private static final Dimension MAIN_SIZE = new Dimension(600, 600);
enum Arrows {
    LEFT(KeyEvent.VK_LEFT, -DELTA_X, 0),
    RIGHT(KeyEvent.VK_RIGHT, DELTA_X, 0),
    UP(KeyEvent.VK_UP, 0, -DELTA_Y),
    DOWN(KeyEvent.VK_DOWN, 0, DELTA_Y);
    private int keyCode;
    private int deltaX, deltaY;
    private Arrows(int keyCode, int deltaX, int deltaY) {
      this.keyCode = keyCode;
      this.deltaX = deltaX;
      this.deltaY = deltaY;
    public int getDeltaX() {
      return deltaX;
    public int getDeltaY() {
      return deltaY;
    public int getKeyCode() {
      return keyCode;
int x = 0;
int y = 250;
public Test2() {
    setBackground(Color.white);
    setPreferredSize(MAIN_SIZE);
    InputMap inMap = getInputMap(JComponent.WHEN_IN_FOCUSED_WINDOW);
    ActionMap actMap = getActionMap();
    for (Arrows arrow : Arrows.values()) {
      inMap.put(KeyStroke.getKeyStroke(arrow.getKeyCode(), 0), arrow);
      actMap.put(arrow, new MyAction(arrow));
private class MyAction extends AbstractAction {
    private Arrows arrow;
    public MyAction(Arrows arrow) {
      this.arrow = arrow;
    public void actionPerformed(ActionEvent e) {
      x += arrow.getDeltaX();
      y += arrow.getDeltaY();
      repaint();
@Override
public void paintComponent(Graphics g) {
    super.paintComponent(g);
    g.setColor(Color.black);
    g.fillRect(x, y, 50, 50);
import javax.swing.JApplet;
@SuppressWarnings("serial")
public class TestApplet extends JApplet {
public void init() {
    try {
      javax.swing.SwingUtilities.invokeAndWait(new Runnable() {
        public void run() {
          createGUI();
    } catch (Exception e) {
      System.err.println("createGUI didn't successfully complete");
private void createGUI() {
    getContentPane().add(new Test2());
}

Sqlpuls command is not working at Linux

Similar Messages

Maybe you are looking for