SQLServer connection refused - What´s problem ?

Please help me !

You need to provide more detail if you want someone to help you.
Connection refused generally means that there is nothing listening on the port you are trying to connect to.

Similar Messages

Firefox is crashing intermittantly and now it says "connection refused" What do I do?

I can not access my firefox portal. It says connection refused.

Disabled
Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: How to back up
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store

TA38529 itunes doesnt recognize my shuffle when connected.. whats the problem?

my computer recognizes the ipod shuffle but my itunes program wont recognize and sync

See here: iPod: Appears in Windows but not in iTunes
B-rock

RMI Callback Connection Refused Problem

we are running Red Hat Linux 9, we previously had a problem connecting a server and client running in 2 different PC's. we had the following error
Exception in mainjava.rmi.ConnectException: Connection refused to host: 127.0.0.1; nested exception is:
java.net.ConnectException: Connection refused
we used the -Djava.rmi.server.hostname= <hostname> option to make it run. Now, were trying to make use of call backs this time we ran into another problem having the error:
Exception in mainjava.rmi.ConnectException: Connection refused to host: 172.16.100.24; nested exception is:
java.net.ConnectException: Connection refused
what are we doing wrong?

We already included a security manager. but the error is still there.

Connection Refused Exception (imap protocol configuration in james server)

hai if i use pop3 protocol i can read the message from the james server
but if i use imap protocol i'm getting the exception connection refused.
what shall i do?

Sounds like a question to ask in the Apache James forum.
The server doesn't seem to be set up to accept IMAP connections.

Certificate authority export fails connection refused

I am trying to export zenwork certificate and I receive the following error:
Command
zman --debug certificate-authority-export /root/cert
Error:Could not connect to the ZENworks Server. Ensure that the server is running, and the host and port information specified is correct.
Debug:
com.novell.zenworks.datamodel.exceptions.Connectio nException: Connection refused
What can I look at?

zman certificate-authority-export /root/cert --debug
Error:Could not connect to the ZENworks Server. Ensure that the server is runnin g, and the host and port information specified is correct.
Debug:
com.novell.zenworks.datamodel.exceptions.Connectio nException: Connection refused
at com.novell.zenworks.zman.exceptions.ZManExceptionH andler.createExcept ion(ZManExceptionHandler.java:286)
at com.novell.zenworks.zman.exceptions.ZManExceptionH andler.makeDataMode lException(ZManExceptionHandler.java:260)
at com.novell.zenworks.zman.exceptions.ZManExceptionH andler.processRemot eException(ZManExceptionHandler.java:390)
at com.novell.zenworks.zman.commands.CAHandler.<init> (CAHandler.java:72)
at sun.reflect.NativeConstructorAccessorImpl.newInsta nce0(Native Method)
at sun.reflect.NativeConstructorAccessorImpl.newInsta nce(NativeConstruct orAccessorImpl.java:39)
at sun.reflect.DelegatingConstructorAccessorImpl.newI nstance(DelegatingC onstructorAccessorImpl.java:27)
at java.lang.reflect.Constructor.newInstance(Construc tor.java:501)
at com.novell.zenworks.zman.CommandRunner.execute(Com mandRunner.java:86)
at com.novell.zenworks.zman.ZMan.executeRunner(ZMan.j ava:321)
at com.novell.zenworks.zman.ZMan.main(ZMan.java:505)
Caused by: java.rmi.ConnectException: Connection refused
at com.novell.soa.ws.portable.ApplicationException.ma pToRemote(Applicati onException.java:207)
at com.novell.zenworks.datamodel.services.zoneconfig. soap.ZoneConfigAdmi nServiceBinding_Stub.hasZENServerRole(ZoneConfigAd minServiceBinding_Stub.java:50 71)
at com.novell.zenworks.zman.commands.CAHandler.<init> (CAHandler.java:68

TS3694 My iPad2 has repeatedly refused to update to iOS7, whether connected to a PC or not. The error message indicates an unknown error has occurred, with error code 6. Does anyone have any idea what the problem might be and how to solve it? Many than

My iPad2 has repeatedly refused to update to iOS7, whether connected to a PC or not. The error message indicates an unknown error has occurred, with error code 6. Does anyone have any idea what the problem might be and how to solve it? Many thanks.

Hi
I followed this guy's instructions and it worked:
http://evsiphone.blogspot.com/2009/05/iphone-iphone-could-not-be-restored.html
I did disable the security (AVG and Zone Alarm) when I tried on my own PC. My wife's laptop which eventually got it working also uses AVG and Zone Alarm but on an XP O/S whereas my PC is Vista - maybe this is why.
Cheers for you help.
Andy
Message was edited by: bigbadandy

Problems with SSH: Connection Refused

Greetings fellow Arch users,
I have hit a bit of a snag that I could really use some extra help getting around. I've tried everything I can think of (and everything that Google thought might work) and I have my back rather against a wall, so I thought I'd come here to see if anyone can offer some advice.
To make a long story short, I am a college student and am attempting to set up an ssh server on a desktop at my house so I can access it remotely from the college. I have the computer set up and the server running, however I am having difficulty making connections to it from my laptop. I know that the server is running, because I can log into it both from the server itself (sshing into local host) and from my laptop when I use the internal IP address.
The server is on a static IP address within the network(192.168.0.75), and my router is configured to forward TCP port 1500 to it (I'm using 1500 as the port for my ssh server). However, when I attempt to log into the ssh server using my network's external IP address, the connection is refused. I used nmap to scan my network and found that, even though the proper ports are forwarded to the proper place as far as my Router's configuration interface is concerned, port 1500 is not listed as one of the open TCP ports. I also, to test it, temporarily disabled the firewalls on both the server and the client. That didn't help. The command that I am running is:
ssh -p 1500 douglas@[external ip address
As I am really not sure what is causing this problem, I don't know what information to provide. So here is everything that my inexperienced mind sees as likely being important. If you need anything more, let me know and I will do my best to provide it.
Here is the sshd_config file from my server.
# This is the sshd server system-wide configuration file. See
# sshd_config(5) for more information.
# This sshd was compiled with PATH=/usr/bin:/bin:/usr/sbin:/sbin
# The strategy used for options in the default sshd_config shipped with
# OpenSSH is to specify options with their default value where
# possible, but leave them commented. Uncommented options override the
# default value.
Port 1500
#AddressFamily any
#ListenAddress 0.0.0.0
#ListenAddress ::
# The default requires explicit activation of protocol 1
#Protocol 2
# HostKey for protocol version 1
#HostKey /etc/ssh/ssh_host_key
# HostKeys for protocol version 2
#HostKey /etc/ssh/ssh_host_rsa_key
#HostKey /etc/ssh/ssh_host_dsa_key
#HostKey /etc/ssh/ssh_host_ecdsa_key
# Lifetime and size of ephemeral version 1 server key
#KeyRegenerationInterval 1h
#ServerKeyBits 1024
# Ciphers and keying
#RekeyLimit default none
# Logging
# obsoletes QuietMode and FascistLogging
#SyslogFacility AUTH
#LogLevel INFO
# Authentication:
#LoginGraceTime 2m
PermitRootLogin no
#StrictModes yes
#MaxAuthTries 6
#MaxSessions 10
#RSAAuthentication yes
#PubkeyAuthentication yes
# The default is to check both .ssh/authorized_keys and .ssh/authorized_keys2
# but this is overridden so installations will only check .ssh/authorized_keys
AuthorizedKeysFile .ssh/authorized_keys
#AuthorizedPrincipalsFile none
#AuthorizedKeysCommand none
#AuthorizedKeysCommandUser nobody
# For this to work you will also need host keys in /etc/ssh/ssh_known_hosts
#RhostsRSAAuthentication no
# similar for protocol version 2
#HostbasedAuthentication no
# Change to yes if you don't trust ~/.ssh/known_hosts for
# RhostsRSAAuthentication and HostbasedAuthentication
#IgnoreUserKnownHosts no
# Don't read the user's ~/.rhosts and ~/.shosts files
#IgnoreRhosts yes
# To disable tunneled clear text passwords, change to no here!
#PasswordAuthentication yes
#PermitEmptyPasswords no
# Change to no to disable s/key passwords
ChallengeResponseAuthentication no
# Kerberos options
#KerberosAuthentication no
#KerberosOrLocalPasswd yes
#KerberosTicketCleanup yes
#KerberosGetAFSToken no
# GSSAPI options
#GSSAPIAuthentication no
#GSSAPICleanupCredentials yes
# Set this to 'yes' to enable PAM authentication, account processing,
# and session processing. If this is enabled, PAM authentication will
# be allowed through the ChallengeResponseAuthentication and
# PasswordAuthentication. Depending on your PAM configuration,
# PAM authentication via ChallengeResponseAuthentication may bypass
# the setting of "PermitRootLogin without-password".
# If you just want the PAM account and session checks to run without
# PAM authentication, then enable this but set PasswordAuthentication
# and ChallengeResponseAuthentication to 'no'.
UsePAM yes
#AllowAgentForwarding yes
#AllowTcpForwarding yes
#GatewayPorts no
#X11Forwarding no
#X11DisplayOffset 10
#X11UseLocalhost yes
PrintMotd no # pam does that
#PrintLastLog yes
#TCPKeepAlive yes
#UseLogin no
UsePrivilegeSeparation sandbox # Default for new installations.
#PermitUserEnvironment no
#Compression delayed
#ClientAliveInterval 0
#ClientAliveCountMax 3
#UseDNS yes
#PidFile /run/sshd.pid
#MaxStartups 10:30:100
#PermitTunnel no
#ChrootDirectory none
#VersionAddendum none
# no default banner path
#Banner none
# override default of no subsystems
Subsystem sftp /usr/lib/ssh/sftp-server
# Example of overriding settings on a per-user basis
#Match User anoncvs
# X11Forwarding no
# AllowTcpForwarding no
# ForceCommand cvs server
The ouptut of ip addr when run on the server:
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
valid_lft forever preferred_lft forever
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: enp8s0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP qlen 1000
link/ether 00:21:9b:3a:be:94 brd ff:ff:ff:ff:ff:ff
inet 192.168.0.75/24 brd 192.168.255.0 scope global enp8s0
valid_lft forever preferred_lft forever
inet6 fe80::221:9bff:fe3a:be94/64 scope link
valid_lft forever preferred_lft forever
Here is the output from running nmap on the network:
Starting Nmap 6.40 ( http://nmap.org ) at 2013-09-28 21:05 EDT
Initiating Ping Scan at 21:05
Scanning address [2 ports]
Completed Ping Scan at 21:05, 0.01s elapsed (1 total hosts)
Initiating Parallel DNS resolution of 1 host. at 21:05
Completed Parallel DNS resolution of 1 host. at 21:05, 0.05s elapsed
Initiating Connect Scan at 21:05
Scanning pa-addresss.dhcp.embarqhsd.net (address) [1000 ports]
Discovered open port 80/tcp on address
Discovered open port 443/tcp on address
Discovered open port 23/tcp on address
Discovered open port 21/tcp on address
Completed Connect Scan at 21:05, 4.08s elapsed (1000 total ports)
Nmap scan report for pa-address.dhcp.embarqhsd.net (address)
Host is up (0.036s latency).
Not shown: 995 closed ports
PORT STATE SERVICE
21/tcp open ftp
23/tcp open telnet
80/tcp open http
443/tcp open https
8080/tcp filtered http-proxy
Read data files from: /usr/bin/../share/nmap
Nmap done: 1 IP address (1 host up) scanned in 4.19 seconds
Here is the ssh_config client-side:
# $OpenBSD: ssh_config,v 1.27 2013/05/16 02:00:34 dtucker Exp $
# This is the ssh client system-wide configuration file. See
# ssh_config(5) for more information. This file provides defaults for
# users, and the values can be changed in per-user configuration files
# or on the command line.
# Configuration data is parsed as follows:
# 1. command line options
# 2. user-specific file
# 3. system-wide file
# Any configuration value is only changed the first time it is set.
# Thus, host-specific definitions should be at the beginning of the
# configuration file, and defaults at the end.
# Site-wide defaults for some commonly used options. For a comprehensive
# list of available options, their meanings and defaults, please see the
# ssh_config(5) man page.
# Host *
# ForwardAgent no
# ForwardX11 no
# RhostsRSAAuthentication no
# RSAAuthentication yes
# PasswordAuthentication yes
# HostbasedAuthentication no
# GSSAPIAuthentication no
# GSSAPIDelegateCredentials no
# BatchMode no
# CheckHostIP yes
# AddressFamily any
# ConnectTimeout 0
# StrictHostKeyChecking ask
# IdentityFile ~/.ssh/identity
# IdentityFile ~/.ssh/id_rsa
# IdentityFile ~/.ssh/id_dsa
# Port 22
Protocol 2
# Cipher 3des
# Ciphers aes128-ctr,aes192-ctr,aes256-ctr,arcfour256,arcfour128,aes128-cbc,3des-cbc
# MACs hmac-md5,hmac-sha1,[email protected],hmac-ripemd160
# EscapeChar ~
# Tunnel no
# TunnelDevice any:any
# PermitLocalCommand no
# VisualHostKey no
# ProxyCommand ssh -q -W %h:%p gateway.example.com
# RekeyLimit 1G 1h
Output of ssh -v during connection attempt:
OpenSSH_6.3, OpenSSL 1.0.1e 11 Feb 2013
debug1: Reading configuration data /home/douglas/.ssh/config
debug1: Reading configuration data /etc/ssh/ssh_config
debug2: ssh_connect: needpriv 0
debug1: Connecting to address [address] port 1500.
debug1: connect to address address port 1500: Connection refused
ssh: connect to host address port 1500: Connection refused
Thank you guys ahead of time. Getting this server operational is hardly critical, it is just a side project of mine, but I would really like to see it working.
Douglas Bahr Rumbaugh
Last edited by douglasr (2013-09-29 02:58:56)

Okay, so I finally have the opportunity to try and log in from a remote network. And. . . it doesn't work. Which is just my luck because I now need to wait an entire week, at least, before I can touch the server again. Anyway, running ssh with the maximum verbosity I get this output:
douglas ~ $ ssh -vvv -p 2000 address
OpenSSH_6.3, OpenSSL 1.0.1e 11 Feb 2013
debug1: Reading configuration data /home/douglas/.ssh/config
debug1: Reading configuration data /etc/ssh/ssh_config
debug2: ssh_connect: needpriv 0
debug1: Connecting to address [address] port 2000.
debug1: connect to address address port 2000: Connection timed out
ssh: connect to host address port 2000: Connection timed out
It takes a minute or two for the command to finish with the connection timeout, as one would expect. And yes, I am reasonably sure that the address that I am using is my home network's external IP. It is dynamic, but I checked it before I left which was just over an hour ago. I guess that it may have changed. I'll know that for sure in the morning, when my server sends me an automatic email with the network's current address. In the meantime I am operating under the assumption that the address I am using is correct. What else could be the problem?

TS3048 My early 2009 Mac Pro does not connect via bluetooth to my sound bar or bluetooth mini speakers. Both my wireless keyboard and mouse have no problems connecting. What do I need to do to connect to external bluetooth devices?

My early 2009 Mac Pro does not connect via bluetooth to my sound bar or bluetooth mini speakers. Both my wireless keyboard and mouse have no problems connecting. What do I need to do to connect to external bluetooth devices?

I would always have a wired keyboard and mouse on hand (need not be expensive ... any cheap wired devices will work). "Emergency recovery" procedures can activate features in random order, so the opportunity to select a recovery partition may pass before the wireless devices are recognized.
That will let you select the "turn on Bluetooth" icon.

New iPhone, will not connect to Game Center app. I have tried rebooting phone/app. Phone is connecting to Twitter/iTunes/AppStore all fine. Not sure what the problem is.

I have tried rebooting phone/app. Phone is connecting to Twitter/iTunes/AppStore all fine. Not sure what the problem is. Every time I hit sign in I get "could not connect to game center server".

same problem on iphone 4s. Other people posting problems too. Must be on Apples end.

Just had problem with frozen up Mac computer corrected,now HP printer will not print. Says printer not connected. What is wrong? Everyday a new problem., help.

JJust had problem corrected due to frozen imac, now HP printer will not print. Says it is not connected. What do I do to fix it?

To reset the printing system:
Choose System Preferences from the Apple menu.
Choose Print & Scan from the View menu.
Hold down the Option key while clicking the "-" (Remove printer) button. If no printers are currently added, hold down the Control key while clicking in the box that appears above the "+" (Add printer) button, then choose Reset printing system… from the contextual menu.
When you've done the above you'll need to re-add the printer by clicking the + (Add printer)

On my Mac Mini, I keep getting this error message: "iCloud encountered an error while trying to connect to the server". I don't have any problems with iCloud on my laptop / PC. It works fine... Does anyone know what the problem could be?

On my Mac Mini, I keep getting this error message: "iCloud encountered an error while trying to connect to the server". I don't have any problems with iCloud on my laptop / PC. It works fine... Does anyone know what the problem could be?

Your Mac must be on Lion (10.7) to run iCloud. Apple had to change the operating system to fully support it. Nevertheless, it is possible to get emails from iCloud without having Lion. Please tell me if this interests you.
Anyways, here is the link to buy Lion (30 dollars, totally worth the upgrade ): http://itunes.apple.com/be/app/os-x-lion/id444303913?mt=12
Franklin

HT4437 I have successffully used my iPad with the Apple TV with no problem but just recently, the Airplay icon doesn't come up on the iPad anymore when I'm trying to connect. What can I do to fix this?

I have successffully used my iPad with the Apple TV with no problem but just recently, the Airplay icon doesn't come up on the iPad anymore when I'm trying to connect. What can I do to fix this?

Try restarting your router as a first thing, this sometimes works for me.

Mpd and pulse problem - Connection refused [SOLVED]

I'm having problems getting mpd to play nice with pulse-audio. Pulse is installed and works with vlc, mplayer, flash, etc. just fine. When I try to play through mpd the song in the gui simply shows a status of "paused" and the following gets written to the mpd.log.
Advice is appreciated.
# tail -f /var/log/mpd/mpd.log
Oct 08 11:12 : output: Failed to enable "pulse audio" [pulse]: pa_context_connect() has failed: Connection refused
Oct 08 11:12 : output: Failed to enable "pulse audio" [pulse]: pa_context_connect() has failed: Connection refused
Oct 08 11:12 : output: Failed to enable "pulse audio" [pulse]: pa_context_connect() has failed: Connection refused
Oct 08 11:12 : player_thread: problems opening audio device while playing "Not_So_Hard_Stuff/Disturbed-The Sickness-2000/01_Voices.flac"
Here is my mpd.conf
$ sed '/#/d' /etc/mpd.conf
music_directory "/media/data/all_genres"
playlist_directory "/var/lib/mpd/playlists"
db_file "/var/lib/mpd/mpd.db"
log_file "/var/log/mpd/mpd.log"
pid_file "/var/run/mpd/mpd.pid"
state_file "/var/lib/mpd/mpdstate"
user "mpd"
gapless_mp3_playback "yes"
zeroconf_enabled "yes"
zeroconf_name "Music Player"
input {
plugin "curl"
audio_output {
type "pulse"
name "pulse audio"
mixer_type "software"
audio_buffer_size "35000"
buffer_before_play "5%"
The pulseaudio wiki suggests that a 'pulse' group and 'pulse-access' and even 'pulse-rt' groups may be required? I have used mpd for a year now with no such groups on my system.
EDIT: solved in post #13
Last edited by graysky (2011-10-16 13:42:46)

graysky wrote:
I too modified my /etc/mpd.conf to use alsa even though I don't have alsa-utils installed at all.
$ sed '/#/d' /etc/mpd.conf
music_directory "/media/data/all_genres"
playlist_directory "/var/lib/mpd/playlists"
db_file "/var/lib/mpd/mpd.db"
log_file "/var/log/mpd/mpd.log"
pid_file "/var/run/mpd/mpd.pid"
state_file "/var/lib/mpd/mpdstate"
user "mpd"
gapless_mp3_playback "yes"
zeroconf_enabled "yes"
zeroconf_name "Music Player"
input {
plugin "curl"
audio_output {
type "alsa"
name "My ALSA Device"
mixer_type "software"
audio_buffer_size "35000"
buffer_before_play "5%"
Doesn't work for me I get this error when I try to play something with your configuration:
ALSA lib pulse.c:229:(pulse_connect) PulseAudio: Unable to connect: Connection refused
Oct 16 18:23 : output: Failed to open "My ALSA Device" [alsa]: Failed to open ALSA device "default": Connection refused

Pulseaudio problem , snd_pcm_open failed: Connection refused.

Hello everyone, i have this problem that appeared last week.
I cant play music in any player cause i get this error : snd_pcm_open failed: Connection refused.
i tried things like adding the user to audio group, creating a "pulse" user cause pulseaudio gave me an error like "pulse user" not existent .
but if i test the sound card in the kde4 audio setup it works
anyone have any ideea on how to fix this ?

just restart alsa.
sudo /etc/rc.d/alsa restart
it solved my problem.

SQLServer connection refused - What´s problem ?

Similar Messages

Maybe you are looking for