SQLStateMapping.java:70 Error When Loading Database Capture Script Output

I'm running "Migration->Third Party Database Offline Capture->Load Database Capture Script Output" (Sybase 12) (SQLDeveloper 1.5.5)
After Tables are loaded (16000+ tables), I'm getting the following error in Migration Log:
Error ocurred during capture: In Columns for <column_name>
oracle.jdbc.driver.SQLStateMapping.newSQLException(SQLStateMapping.java:70)
I could not find any hits that match this. What's the best method to troubleshoot this?

Log a service request with the offline scripts and we can check them out and forward them also to Development if needed.

Similar Messages

Java error when loading ZEN

We were updating our 6.5.4 server to sp5. When it would lock up on the
install every time. We called Novell the had us delete the dir "JAVA"
and "JAVASAVE" The rerun the SP5. SP5 installed fine. How ever now we
are having loading errors with ZEN. Here is one of the error "exception
in thread "main" java.lang.NoClassDefFoundError:
com/novell/application/zenworks/autowsmanagement/wsimport/ImportWorkstatio
n"
Any help would be great.
Thanks
Bryan

Bnash,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Do a search of our knowledgebase at http://support.novell.com/search/kb_index.jsp
- Check all of the other support tools and options available at
http://support.novell.com.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://support.novell.com/forums)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://support.novell.com/forums/faq_general.html
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://support.novell.com/forums/

ORA-00054 error when loading Oracle table using Data Services

Hello,
we are facing ORA-00054 error when loading Oracle table using BO Data services
(Oracle 10g database, BODS Xi 3.2 SP3)
Test Job performs
1- truncate table
2- load table (tested in standard and bulk load modes)
Scenario when issue happens is:
1- Run loading Job
2- Job end in error for any Oracle data base error
3- When re-running the same Job, Job fails with following error
ORA-00054: resource busy and acquire with NOWAIT specified
It seems after first failure, Oracle session for loading the table stays active and locks the table.
To be able to rerun the Job, we are forced need to kill Oracle session manually to be able to run the Job again.
Expected behaviour would be : on error rollback modifications made on table and BODS stops Oracle session in a clean way.
Can somebody tell me / or point me to any BODS best practice about Oracle error handling to prevent such case?
Thanks in advance
Paul-Marie

the ora-0054 can occure depending how the job failed before. If this occures you will need the DBA to release the lock on the table in question
Or
AL_Engine.exe on The server it creates the Lock. Need to Kill Them. Or stop it..
This Problem Occurs when we select The Bulkloading Option in orclae We also faced the same issue,Our admin has Killed the session. Then everything alright.

JAVAMAP-Sax Parser ...............Linkage error when loading the class.

Dear all,
Do we have any extra things to execute the Java mapping using the Sax Parser?
When I am executing the interface mapping ,I am getting the" Linkage error when loading the class" error.
Kindly let me know your personnel maildId so that I can mail you the screen shots.
Thanks,
Srinivasa

Dear sunil,
Find the File.
Source:
<MTO_FTP_MAT_DETAILS>
<MATDETAILS>
<MAKTX>
<MATNR>
<WERKS>
<LABST>
<MEINS>
<PERCNT>
TARGET
MTI_FTP_MAT_DETAILS
<MATDETAILS>
<MAKTX>
<MATNR>
<WERKS>
<LABST>
<MEINS>
<PERCNT>
Source:
<MTO_FTP_MAT_DETAILS>
<MATDETAILS>
<MAKTX>
<MATNR>
<WERKS>
<LABST>
<MEINS>
<PERCNT>
TARGET
MTI_FTP_MAT_DETAILS
<MATDETAILS>
<MAKTX>
<MATNR>
<WERKS>
<LABST>
<MEINS>
<PERCNT>
import java.io.IOException;
import java.io.InputStream;
import java.io.OutputStream;
import java.util.Map;
import javax.xml.parsers.SAXParser;
import javax.xml.parsers.SAXParserFactory;
import org.xml.sax.Attributes;
import org.xml.sax.SAXException;
import org.xml.sax.helpers.DefaultHandler;
import com.sap.aii.mapping.api.StreamTransformation;
class Echo {
public static OutputStream out;
public class myEcho extends DefaultHandler implements StreamTransformation {
private Map map;
public void setParameter(Map param) {
map = param;
public void execute(InputStream in, OutputStream out) {
DefaultHandler handler = this;
SAXParserFactory factory = SAXParserFactory.newInstance();
try {
SAXParser saxParser = factory.newSAXParser();
Echo.out = out;
saxParser.parse(in, handler);
} catch (Throwable t) {
t.printStackTrace();
public void startDocument() throws SAXException {
try {
Echo.out.write("<?xml version='1.0' encoding='UTF-8'?>".getBytes());
} catch (IOException e) {
e.notify();
public void endDocument() throws SAXException {
try {
Echo.out.flush();
} catch (IOException e) {
throw new SAXException("I/O error", e);
public void startElement(String namespaceURI, String sName, // simple name
String qName, // qualified name
Attributes attrs) throws SAXException {
String eName = sName; // element name
if ("".equals(eName))
eName = qName; // not namespace-aware
if ("ns0:MTO_SAP_MAT_DETAILS".equals(qName)) {
try {
Echo.out.write(("<MTI_FTP_MAT_DETAILS>").getBytes());
} catch (Exception e) {
e.printStackTrace();
} else {
try {
Echo.out.write(("<" + qName + ">").getBytes());
} catch (Exception e) {
e.printStackTrace();
public void endElement(String namespaceURI, String sName, // simple name
String qName // qualified name
) throws SAXException {
String eName = sName; // element name
if ("".equals(eName))
eName = qName; // not namespace-aware
if ("ns0:MTO_SAP_MAT_DETAILS".equals(qName)) {
try {
Echo.out.write(("</MTI_FTP_MAT_DETAILS>").getBytes());
} catch (Exception e) {
e.printStackTrace();
} else {
try {
Echo.out.write(("</" + qName + ">").getBytes());
} catch (Exception e) {
e.printStackTrace();
public void characters(char buf[], int offset, int len)
throws SAXException {
String s = new String(buf, offset, len);
try {
Echo.out.write(s.getBytes());
} catch (Exception e) {
e.printStackTrace();

SQL Developer 3.2 crashes with java error when using OCI/Thick Driver

I just installed SQL Developer 3.2 on my linux desktop. SQL Developer crashes with a java error when I select a database from the object tree.
When I check Use OCI/Thick driver the application will crash when I navigate to the tree and open a database.
The app does not crash then I have Use OCI/Thick driver unchecked.
Here are some details of my environment:
Desktop OS: Fedora 17 Linux
$ uname -a
Linux 3.5.1-1.fc17.x86_64 #1 SMP Thu Aug 9 17:50:43 UTC 2012 x86_64 x86_64 x86_64 GNU/Linux
Java:
$ java -version
java version "1.6.0_34"
Java(TM) SE Runtime Environment (build 1.6.0_34-b04)
Java HotSpot(TM) 64-Bit Server VM (build 20.9-b04, mixed mode)
Oracle instant client:
$ sqlplus -V
SQL*Plus: Release 11.2.0.3.0 Production
Here are the error messages:
$ sqldeveloper
Oracle SQL Developer
Copyright (c) 1997, 2011, Oracle and/or its affiliates. All rights reserved.
# A fatal error has been detected by the Java Runtime Environment:
# SIGSEGV (0xb) at pc=0x00007f6de7157664, pid=3049, tid=140109371119360
# JRE version: 6.0_34-b04
# Java VM: Java HotSpot(TM) 64-Bit Server VM (20.9-b04 mixed mode linux-amd64 compressed oops)
# Problematic frame:
# V [libjvm.so+0x516664] unsigned+0xd4
# An error report file with more information is saved as:
# /tmp/hs_err_pid3049.log
# If you would like to submit a bug report, please visit:
# http://java.sun.com/webapps/bugreport/crash.jsp
/opt/sqldeveloper/sqldeveloper/bin/../../ide/bin/launcher.sh: line 544: 3049 Aborted (core dumped) ${JAVA} "${APP_VM_OPTS[@]}" ${APP_ENV_VARS} -classpath ${APP_CLASSPATH} ${APP_MAIN_CLASS} "${APP_APP_OPTS[@]}"

I also had the problem of SQL Developer crashing when using OCI/Thick driver but I've managed to solve it. My configuration is:
- Windows 64-bit
- Java 64-bit (1.6.0.34)
- SQL Developer 3.2.09 64-bit
- OCI Instant client 11.2.0.3 64-bit (without installation).
The thing that solved the problem was copying two files, ojdbc5.jar and ojdbc6.jar, from Instant client installation folder to JAVA_HOME/lib/ext folder+.
After that, I haven't had a single crash or error message.
The same trick that solved the problem on 64-bit installation also solved the problem on another windows computer with 32-bit SQL Developer installation.

Java Error when launching BLS

Using xMII 11.5 SP3, one of our other xMII developers is getting the following Java error when launching the BLS editor:
Unable to load resource: http://xmiid.oxy.com/Lighthammer/CMSLogicEditor/activation.jar
His computer was reimaged a couple of days ago with our standard image (Windows XP SP2, IE6 SP2). It worked fine on his computer prior to the re-image. He's reloaded Sun Java 1.4.2_01 on his computer (our company default is 1.4.1_01.)
I can't duplicate the error on any of our test computers - one of which was also recently re-imaged.
Any ideas?
David

David,
So other standard imaged machines are running 1.4.2_01 and have no issues? I would expect to see problems with the webstart cookie handling for that version, but I'm running _15....
Try clearing the Java WS cache on the problematic client instance to watch it try to download all the libraries fresh.
File...Preferences, reconfirm that the None radio button is selected on the General tab, and then on the Advanced tab, press the Clear Folder button.
You could also make sure before hitting the editor link in the Menu.jsp that there are no dead or leftover javaws processes running in the task manager.
Regards,
Jeremy

Error when inserting Web Dynpro script in Adobe form

Hi
In my WD component in one of the view I have an ADOBE form (Online scenario) and a button to save data into backend. In the ADOBE form everything is working properly, however the problem is when I click on the button to save, Its not getting into my action code. Even I am not getting any error other than the wait symbol.
In the form I have taken ZCI layout but when i'm inserting Webdynpro Script its showing an error 'Error when inserting Web Dynpro script'.
Please let me know why this error is getting.
Thanks
Ram

Hi Ram,
I hope you help me,
I have the same error, when I insert a web Dynrp Script, what version of SAPGUI do you use?
Thanks

Error when loading XSLT mapping of the application

Hi,
I am using XSLT mapping in XI.
It is working ok when I test it in Interface Mapping but it gives below error when I test end to end scenario.
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>Application</SAP:Category>
<SAP:Code area="MAPPING">TRANSFORMER_CONF_EX</SAP:Code>
<SAP:P1>com/cba/***.xsl</SAP:P1>
<SAP:P2>urn:**:**</SAP:P2>
<SAP:P3>450326d0-1559-11dd-99a1-d89c0a0a380b</SAP:P3>
<SAP:P4>-1</SAP:P4>
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Error when loading XSLT mapping of the application</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
Yes, I have activated it
Regards,
Anirudh.

hi
please assure that if you save your xslt stylesheet locally, that it is saved in UTF-8 format, before you import it.
Pls do export the imported archive as a zip file to your local disk and try opening the same. If its not then the zip file which you have uploaded might have got corrupted/is not fully uploaded.
Try activating the imported archive and do a check before you do that. This you can do with a minor change in the description or so.
reward points if found helpfull
regards
chandra.k

Error when inserting Web Dynpro script

Hello,
I am trying to create a new form using fields from KNA1 and am using ISR controls. When I try to insert Webdynpro scripts i get message "Error when inserting Web Dynpro script" Message no. FPUIFB094.
Has anyone faced this error? no notes are available regarding this and in SDN.
Regards
Prasad

It must be atleast ALD 7.1. Check this [Thread|Re: Problem on Button; having the same issue. Also check the SAPNOTE 962763.

Error when loading data in Infopackage

Hi Friends,
I'm getting the following error when loading please help it is quite urgent.
Value 'ZSATX #1 ' (hex. '436F6E7461696E6572202331 ') of characteristic ZSIGNI contains invalid characte BRAIN
Thnaks ,

Hi Smily,
It refers to an invalid char found in this InfoObject value. Does your system have anything maintained in RSKC?
For good info you can refer to Eugene's blogs:
/people/sap.user72/blog/2006/07/08/invalid-characters-in-sap-bw-3x-myths-and-reality-part-1
/people/sap.user72/blog/2006/07/23/invalid-characters-in-sap-bw-3x-myths-and-reality-part-2
Hope this helps...

Error when loading lower case

Hi Friends,
I getting an error when loading the Infopackage ,
"Value 'sss ' (hex. '737373 ') of characteristic Zapple contains invalid characters"
I used the formula "To upper" in my T/R still I was getting the same error" and also I edited the value in PSA to "SSS" and loaded and still pointing to the same error. when I do a find for "sss" I dont see any value in PSA.
Please advice, it will be really appreciated,
thanks alot in advance

Hi,
U cont see the special characters in display mode in PSA...
for that First the check the reason for error,
it is from PSA, and the status in the monitor turned to red with errors or collection eneded with source system.. then go to manage of data target delete the red request... now go to PSA in modelling then select ur infosource right click select the option edit PSA data..
Now u can see the some special characteristics in the record that error occured... once it is complete then save come back to PSA screen then once again right click on the Infosource select immeadiate update.. it will work fine..
Siddhu

Error -5000 and: Error when loading the transcode setting

For a couple of days I've been trying to export my project on a DVD, but on the half way of the transcoding it comes the Error -5000, and then there is such a message, something about the navigation, can't be found etc... I work on a mac OS X, using Encore CS3, all my data I've got on my external harddisk, with space of 80 GB.
Besides, when I'm trying to export my project on a blu-ray disc, there comes a message: Error when loading the transcode setting! I know that there are only two codecs there - H.264 and MPEG-2, and there are only MPEG-2 movie files there, so I set the MPEG-2 codec. And there comes such a thing! Having set the H.264, there comes the same. What can it be?
And the last one is the copy protection. I know that it can be activated, with CGMS and Macrovision, only if the CSS option is set on "permit no copies". So I do, and then there comes a message - "for these settings there is no copy protection provided". So what now to do?

My flash drive PNY comes up with error -5000 and i do not know what to do can you help me with this problems

LSO: Java errors when using Authoring Environment to check-in eLearning

Have any users here encountered any of these Java errors when trying to check-in eLearning content to the Master Repository?
reuseObj is null
java.lang.NullPointerException: reuseObj is null
     at com.sap.hcm.ls.shared.repository.exchange.DeltaVersionData.<init>(DeltaVersionData.java:62)
     at com.sap.hcm.ls.shared.repository.exchange.CopyMan.checkIn(CopyMan.java:160)
     at com.sap.hcm.ls.shared.repository.exchange.Publisher.checkInObjects(Publisher.java:270)
     at com.sap.hcm.ls.las.repository.explorer.wizard.steps.CheckInObjectsStep.workerThread(CheckInObjectsStep.java:85)
     at com.sap.hcm.ls.shared.util.swing.wizardfw.steps.ProgressWizardStep.run(ProgressWizardStep.java:209)
     at java.lang.Thread.run(Unknown Source)
No semaphore for: /<path>/_groupManProps.txt
java.io.IOException: No semaphore for: /<path>/_groupManProps.txt
     at com.sap.hcm.ls.shared.repository.control.implicit.ImpVersManager.getAndUpdateNextRevisionNumberForGroup(ImpVersManager.java:920)
     at com.sap.hcm.ls.shared.repository.control.implicit.ImpVersManager.postSpecifyRevisionNumber(ImpVersManager.java:624)
     at com.sap.hcm.ls.shared.repository.exchange.CopyMan.copyProps(CopyMan.java:867)
     at com.sap.hcm.ls.shared.repository.exchange.CopyMan.checkIn(CopyMan.java:227)
     at com.sap.hcm.ls.shared.repository.exchange.Publisher.checkInObjects(Publisher.java:270)
     at com.sap.hcm.ls.las.repository.explorer.wizard.steps.CheckInObjectsStep.workerThread(CheckInObjectsStep.java:85)
     at com.sap.hcm.ls.shared.util.swing.wizardfw.steps.ProgressWizardStep.run(ProgressWizardStep.java:209)
     at java.lang.Thread.run(Thread.java:619)
Unexpected object state: /<path>/v1/ [rep=http://<path>:80/publishing/LSO_SH1/, type=4, props={status=reserved, type=4, isVersioned=m, pathHash=1855656709}]
com.sap.hcm.ls.shared.repository.access.ConcurrentIOException: Unexpected object state: /<path>/v1/ [rep=http://<path>:80/publishing/LSO_SH1/, type=4, props={status=reserved, type=4, isVersioned=m, pathHash=1855656709}]
     at com.sap.hcm.ls.shared.repository.exchange.Publisher.announceToPublisherDB(Publisher.java:733)
     at com.sap.hcm.ls.shared.repository.exchange.Publisher.checkInObjects(Publisher.java:288)
     at com.sap.hcm.ls.las.repository.explorer.wizard.steps.CheckInObjectsStep.workerThread(CheckInObjectsStep.java:85)
     at com.sap.hcm.ls.shared.util.swing.wizardfw.steps.ProgressWizardStep.run(ProgressWizardStep.java:209)
     at java.lang.Thread.run(Thread.java:619)
They each seem to point to some degree or another to using Versioning, but I've gotten those errors whether the "Use Delta Versioning..." checkbox is checked or unchecked. I do have the standard versioning settings set in the IMG, the standard delivered settings. And it's referencing the same file, _groupManProps.txt, that doesn't exist in any of the packages I've tried to publish/check-in. I've tried both AICC and SCORM content and I get the same errors.
We have an ECC6 system on EHP5, and using Authoring Environment version LSOAE09_0-10006103.
I'm running the Authoring Environment on a 64-bit Windows 7 PC.
I've tried to publish/check-in with the following versions of the Java SDK:
1.4.2 Update 13
1.4.2 Update 19 (the latest in 1.4.2 with a Windows installer available)
6 Update 14 (a colleague is using this version successfully with the AE)
6 Update 23
Each of those were the 32-bit versions after trying a 64-bit version of one (based on my PC's OS) and getting an unrelated 64-bit error.
I would appreciate any experience or wisdom any other users here have to share.
Thanks!
Jason
Edited by: jtrain on Nov 22, 2011 9:29 AM

It was an adjustment we made on our ISA 2006 server. Under
1. Open Array - Configurarion - General
2. Select Additional Security Policy - Configure Flood Mitigation
3. On the Flood Mitigations Tab, there are a number of flood mitigation settings that can be configured.
The setting we had to adjust is under the "Maximum HTTP requests per minute per IP address (Click on Edit)
Increase the "Limit:" setting. We set it to 1500 which resolved our problem.
4. Apply the policy and wait for the configuration to be updated on all array members ( may take several minutes)
Regards,

I now get an 500 Internal Server error when loading Firefox, after updating RealPlayer

I now get an 500 Internal Server error when loading Firefox, after updating RealPlayer.
When I try to open Firefox, it opens. But there is the error message.
What is this? How do I did rid of it?
'''bold text'''

Clear the cache and the cookies from sites that cause problems.
* "Clear the Cache": Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
* "Remove the Cookies" from sites causing problems: Tools > Options > Privacy > Cookies: "Show Cookies"
Start Firefox in [[Safe Mode]] to check if one of the add-ons is causing the problem (switch to the DEFAULT theme: Tools > Add-ons > Appearance/Themes).
* Don't make any changes on the Safe mode start window.
See:
* [[Troubleshooting extensions and themes]]
You can also check the connection settings in Tools > Options > Advanced : Network : Connection<br />
If you do not need to use a proxy to connect to internet then select "No Proxy"
See "Firefox connection settings":
* [[Firefox cannot load websites but other programs can]]

Report Designer - Error when Loading Report

Hi,
We have created a report in Report Designer (7.0) and saved it. When we execute it runs fine. After closing the report and trying to reopen it, the report does not open. It gives an error "Error when Loading Report". Our BI frontend patch is 14.
Did anyone encounter this issue and is there a solution to this.
Thanks
Hemant

Hello,
Please go to SE38 -> RS_REPORT_MAINTAIN,
Type your report name, and DT als "Report Type".
Goto edit mode, copy&paste this XML into txt file and send it to me ([email protected]). I will check whats going on with this report. Loading should be always possible.
Regards, Karol Kalisz, BI Development

SQLStateMapping.java:70 Error When Loading Database Capture Script Output

Similar Messages

Maybe you are looking for